Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

7 files changed, 10 insertions, 10 deletions

diff --git a/include/configs/aria.h b/include/configs/aria.h
index 06763c5d96..b6669e72a6 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -190,7 +190,7 @@
 
 /*
  * Backward compatible definitions,
- * so we do not have to change arch/ppc/cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
  */
 #define	CONFIG_SYS_DDRCMD_EM2		(CONFIG_SYS_MICRON_EMR2)
 #define CONFIG_SYS_DDRCMD_EM3		(CONFIG_SYS_MICRON_EMR3)
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 44669ea44d..29951f7f12 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -141,7 +141,7 @@
 
 #define CONFIG_SYS_FLASH_BASE		0xfe000000
 /*
- * The flash size is autoconfigured, but arch/ppc/cpu/mpc5xxx/cpu_init.c needs this
+ * The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
  * variable defined
  */
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index e5537da4af..48dc9463a8 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -230,7 +230,7 @@
  *       SDRAM Controller DDR autocalibration values and takes a lot longer
  *       to run than Method_B.
  * (See the Method_A and Method_B algorithm discription in the file:
- *	arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
+ *	arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
  * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
  *
  * DDR Autocalibration Method_B is the default.
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 3958d09eb9..6883e79e37 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -290,7 +290,7 @@
  * taken from the orignal Linkstation boot code
  *
  * Most of the low level configuration setttings are normally used
- * in arch/ppc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
+ * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
  * Low level initialisation is done in board/linkstation/early_init.S
  * The values below are included for reference purpose only
  */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 2472187520..5538b18ef8 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -233,7 +233,7 @@
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./arch/ppc/cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/start.S */
 #define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
@@ -251,7 +251,7 @@
  * Taken from PPCBoot board/icecube/icecube.h
  */
 
-/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
 #define CONFIG_SYS_EBC_PB0AP		0x04002480
 /* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
 #define CONFIG_SYS_EBC_PB0CR		0xFFC5A000
@@ -269,7 +269,7 @@
  *
  * Taken in part from PPCBoot board/icecube/icecube.h
  */
-/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
 #define CONFIG_SYS_GPIO0_OSRH		0x55555550
 #define CONFIG_SYS_GPIO0_OSRL		0x00000110
 #define CONFIG_SYS_GPIO0_ISR1H		0x00000000
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 7423663a26..61eb26ed84 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -456,7 +456,7 @@
  * - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
  * - Stackpointer will be located to
  *   (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
- *   in arch/ppc/cpu/ppc4xx/start.S
+ *   in arch/powerpc/cpu/ppc4xx/start.S
  */
 
 #undef CONFIG_SYS_INIT_DCACHE_CS
@@ -495,7 +495,7 @@
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 /* ################################################################################### */
-/* These defines will be used in arch/ppc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
+/* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
 /* They are currently undefined cause they are initiaized in board/solidcard3/init.S   */
 
 /* This chip select accesses the boot device */
diff --git a/include/ns16550.h b/include/ns16550.h
index ce606b5738..9ea81e9463 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -1,6 +1,6 @@
 /*
  * NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
  *
  * Cleanup and unification
  * (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH