Merge branch 'master' of git://git.denx.de/u-boot-dm

32 files changed, 731 insertions, 197 deletions

diff --git a/include/_exports.h b/include/_exports.h
index 349a3c5522..594470328e 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -1,32 +1,73 @@
 /*
- * You do not need to use #ifdef around functions that may not exist
+ * You need to use #ifdef around functions that may not exist
  * in the final configuration (such as i2c).
+ * use a dummyfunction as first parameter to EXPORT_FUNC.
+ * As an example see the CONFIG_CMD_I2C section below
  */
-EXPORT_FUNC(get_version)
-EXPORT_FUNC(getc)
-EXPORT_FUNC(tstc)
-EXPORT_FUNC(putc)
-EXPORT_FUNC(puts)
-EXPORT_FUNC(printf)
-EXPORT_FUNC(install_hdlr)
-EXPORT_FUNC(free_hdlr)
-EXPORT_FUNC(malloc)
-EXPORT_FUNC(free)
-EXPORT_FUNC(udelay)
-EXPORT_FUNC(get_timer)
-EXPORT_FUNC(vprintf)
-EXPORT_FUNC(do_reset)
-EXPORT_FUNC(getenv)
-EXPORT_FUNC(setenv)
-EXPORT_FUNC(simple_strtoul)
-EXPORT_FUNC(strict_strtoul)
-EXPORT_FUNC(simple_strtol)
-EXPORT_FUNC(strcmp)
-EXPORT_FUNC(i2c_write)
-EXPORT_FUNC(i2c_read)
-EXPORT_FUNC(spi_init)
-EXPORT_FUNC(spi_setup_slave)
-EXPORT_FUNC(spi_free_slave)
-EXPORT_FUNC(spi_claim_bus)
-EXPORT_FUNC(spi_release_bus)
-EXPORT_FUNC(spi_xfer)
+#ifndef EXPORT_FUNC
+#define EXPORT_FUNC(a, b, c, ...)
+#endif
+	EXPORT_FUNC(get_version, unsigned long, get_version, void)
+	EXPORT_FUNC(getc, int, getc, void)
+	EXPORT_FUNC(tstc, int, tstc, void)
+	EXPORT_FUNC(putc, void, putc, const char)
+	EXPORT_FUNC(puts, void, puts, const char *)
+	EXPORT_FUNC(printf, int, printf, const char*, ...)
+#if defined(CONFIG_X86) || defined(CONFIG_PPC)
+	EXPORT_FUNC(irq_install_handler, void, install_hdlr,
+		    int, interrupt_handler_t, void*)
+
+	EXPORT_FUNC(irq_free_handler, void, free_hdlr, int)
+#else
+	EXPORT_FUNC(dummy, void, install_hdlr, void)
+	EXPORT_FUNC(dummy, void, free_hdlr, void)
+#endif
+	EXPORT_FUNC(malloc, void *, malloc, size_t)
+	EXPORT_FUNC(free, void, free, void *)
+	EXPORT_FUNC(udelay, void, udelay, unsigned long)
+	EXPORT_FUNC(get_timer, unsigned long, get_timer, unsigned long)
+	EXPORT_FUNC(vprintf, int, vprintf, const char *, va_list)
+	EXPORT_FUNC(do_reset, int, do_reset, cmd_tbl_t *,
+		    int , int , char * const [])
+	EXPORT_FUNC(getenv, char  *, getenv, const char*)
+	EXPORT_FUNC(setenv, int, setenv, const char *, const char *)
+	EXPORT_FUNC(simple_strtoul, unsigned long, simple_strtoul,
+		    const char *, char **, unsigned int)
+	EXPORT_FUNC(strict_strtoul, int, strict_strtoul,
+		    const char *, unsigned int , unsigned long *)
+	EXPORT_FUNC(simple_strtol, long, simple_strtol,
+		    const char *, char **, unsigned int)
+	EXPORT_FUNC(strcmp, int, strcmp, const char *cs, const char *ct)
+#if defined(CONFIG_CMD_I2C) && \
+		(!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT))
+	EXPORT_FUNC(i2c_write, int, i2c_write, uchar, uint, int , uchar * , int)
+	EXPORT_FUNC(i2c_read, int, i2c_read, uchar, uint, int , uchar * , int)
+#else
+	EXPORT_FUNC(dummy, void, i2c_write, void)
+	EXPORT_FUNC(dummy, void, i2c_read, void)
+#endif
+
+#if !defined(CONFIG_CMD_SPI) || defined(CONFIG_DM_SPI)
+	EXPORT_FUNC(dummy, void, spi_init, void)
+	EXPORT_FUNC(dummy, void, spi_setup_slave, void)
+	EXPORT_FUNC(dummy, void, spi_free_slave, void)
+#else
+	EXPORT_FUNC(spi_init, void, spi_init, void)
+	EXPORT_FUNC(spi_setup_slave, struct spi_slave *, spi_setup_slave,
+		    unsigned int, unsigned int, unsigned int, unsigned int)
+	EXPORT_FUNC(spi_free_slave, void, spi_free_slave, struct spi_slave *)
+#endif
+#ifndef CONFIG_CMD_SPI
+	EXPORT_FUNC(dummy, void, spi_claim_bus, void)
+	EXPORT_FUNC(dummy, void, spi_release_bus, void)
+	EXPORT_FUNC(dummy, void, spi_xfer, void)
+#else
+	EXPORT_FUNC(spi_claim_bus, int, spi_claim_bus, struct spi_slave *)
+	EXPORT_FUNC(spi_release_bus, void, spi_release_bus, struct spi_slave *)
+	EXPORT_FUNC(spi_xfer, int, spi_xfer, struct spi_slave *,
+		    unsigned int, const void *, void *, unsigned long)
+#endif
+	EXPORT_FUNC(ustrtoul, unsigned long, ustrtoul,
+		    const char *, char **, unsigned int)
+	EXPORT_FUNC(ustrtoull, unsigned long long, ustrtoull,
+		    const char *, char **, unsigned int)
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 3d14d5f117..6747619b1c 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -73,7 +73,7 @@ typedef struct global_data {
 	const void *fdt_blob;	/* Our device tree, NULL if none */
 	void *new_fdt;		/* Relocated FDT */
 	unsigned long fdt_size;	/* Space reserved for relocated FDT */
-	void **jt;		/* jump table */
+	struct jt_funcs *jt;		/* jump table */
 	char env_buf[32];	/* buffer for getenv() before reloc. */
 #ifdef CONFIG_TRACE
 	void		*trace_buff;	/* The trace buffer */
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 36a36c64b8..3b96b8209a 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -10,6 +10,15 @@
 /*
  * Generic GPIO API for U-Boot
  *
+ * --
+ * NB: This is deprecated. Please use the driver model functions instead:
+ *
+ *    - gpio_request_by_name()
+ *    - dm_gpio_get_value() etc.
+ *
+ * For now we need a dm_ prefix on some functions to avoid name collision.
+ * --
+ *
  * GPIOs are numbered from 0 to GPIO_COUNT-1 which value is defined
  * by the SOC/architecture.
  *
@@ -26,6 +35,7 @@
  */
 
 /**
+ * @deprecated	Please use driver model instead
  * Request a GPIO. This should be called before any of the other functions
  * are used on this GPIO.
  *
@@ -39,6 +49,7 @@
 int gpio_request(unsigned gpio, const char *label);
 
 /**
+ * @deprecated	Please use driver model instead
  * Stop using the GPIO.  This function should not alter pin configuration.
  *
  * @param gpio	GPIO number
@@ -47,6 +58,7 @@ int gpio_request(unsigned gpio, const char *label);
 int gpio_free(unsigned gpio);
 
 /**
+ * @deprecated	Please use driver model instead
  * Make a GPIO an input.
  *
  * @param gpio	GPIO number
@@ -55,6 +67,7 @@ int gpio_free(unsigned gpio);
 int gpio_direction_input(unsigned gpio);
 
 /**
+ * @deprecated	Please use driver model instead
  * Make a GPIO an output, and set its value.
  *
  * @param gpio	GPIO number
@@ -64,6 +77,7 @@ int gpio_direction_input(unsigned gpio);
 int gpio_direction_output(unsigned gpio, int value);
 
 /**
+ * @deprecated	Please use driver model instead
  * Get a GPIO's value. This will work whether the GPIO is an input
  * or an output.
  *
@@ -73,6 +87,7 @@ int gpio_direction_output(unsigned gpio, int value);
 int gpio_get_value(unsigned gpio);
 
 /**
+ * @deprecated	Please use driver model instead
  * Set an output GPIO's value. The GPIO must already be an output or
  * this function may have no effect.
  *
@@ -95,6 +110,34 @@ enum gpio_func_t {
 
 struct udevice;
 
+struct gpio_desc {
+	struct udevice *dev;	/* Device, NULL for invalid GPIO */
+	unsigned long flags;
+#define GPIOD_REQUESTED		(1 << 0)	/* Requested/claimed */
+#define GPIOD_IS_OUT		(1 << 1)	/* GPIO is an output */
+#define GPIOD_IS_IN		(1 << 2)	/* GPIO is an output */
+#define GPIOD_ACTIVE_LOW	(1 << 3)	/* value has active low */
+#define GPIOD_IS_OUT_ACTIVE	(1 << 4)	/* set output active */
+
+	uint offset;		/* GPIO offset within the device */
+	/*
+	 * We could consider adding the GPIO label in here. Possibly we could
+	 * use this structure for internal GPIO information.
+	 */
+};
+
+/**
+ * dm_gpio_is_valid() - Check if a GPIO is gpio_is_valie
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @return true if valid, false if not
+ */
+static inline bool dm_gpio_is_valid(struct gpio_desc *desc)
+{
+	return desc->dev != NULL;
+}
+
 /**
  * gpio_get_status() - get the current GPIO status as a string
  *
@@ -106,6 +149,8 @@ struct udevice;
  * which means this is GPIO bank b, offset 4, currently set to input, current
  * value 1, [x] means that it is requested and the owner is 'sdmmc_cd'
  *
+ * TODO(sjg@chromium.org): This should use struct gpio_desc
+ *
  * @dev:	Device to check
  * @offset:	Offset of device GPIO to check
  * @buf:	Place to put string
@@ -118,6 +163,8 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize);
  *
  * Note this returns GPIOF_UNUSED if the GPIO is not requested.
  *
+ * TODO(sjg@chromium.org): This should use struct gpio_desc
+ *
  * @dev:	Device to check
  * @offset:	Offset of device GPIO to check
  * @namep:	If non-NULL, this is set to the nane given when the GPIO
@@ -135,6 +182,8 @@ int gpio_get_function(struct udevice *dev, int offset, const char **namep);
  * Note this does not return GPIOF_UNUSED - it will always return the GPIO
  * driver's view of a pin function, even if it is not correctly set up.
  *
+ * TODO(sjg@chromium.org): This should use struct gpio_desc
+ *
  * @dev:	Device to check
  * @offset:	Offset of device GPIO to check
  * @namep:	If non-NULL, this is set to the nane given when the GPIO
@@ -155,6 +204,8 @@ int gpio_get_raw_function(struct udevice *dev, int offset, const char **namep);
 int gpio_requestf(unsigned gpio, const char *fmt, ...)
 		__attribute__ ((format (__printf__, 2, 3)));
 
+struct fdtdec_phandle_args;
+
 /**
  * struct struct dm_gpio_ops - Driver model GPIO operations
  *
@@ -198,6 +249,33 @@ struct dm_gpio_ops {
 	 * @return current function - GPIOF_...
 	 */
 	int (*get_function)(struct udevice *dev, unsigned offset);
+
+	/**
+	 * xlate() - Translate phandle arguments into a GPIO description
+	 *
+	 * This function should set up the fields in desc according to the
+	 * information in the arguments. The uclass will have set up:
+	 *
+	 *   @desc->dev to @dev
+	 *   @desc->flags to 0
+	 *   @desc->offset to the value of the first argument in args, if any,
+	 *		otherwise -1 (which is invalid)
+	 *
+	 * This method is optional so if the above defaults suit it can be
+	 * omitted. Typical behaviour is to set up the GPIOD_ACTIVE_LOW flag
+	 * in desc->flags.
+	 *
+	 * Note that @dev is passed in as a parameter to follow driver model
+	 * uclass conventions, even though it is already available as
+	 * desc->dev.
+	 *
+	 * @dev:	GPIO device
+	 * @desc:	Place to put GPIO description
+	 * @args:	Arguments provided in descripion
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*xlate)(struct udevice *dev, struct gpio_desc *desc,
+		     struct fdtdec_phandle_args *args);
 };
 
 /**
@@ -268,4 +346,191 @@ int gpio_lookup_name(const char *name, struct udevice **devp,
  */
 unsigned gpio_get_values_as_int(const int *gpio_list);
 
+/**
+ * gpio_request_by_name() - Locate and request a GPIO by name
+ *
+ * This operates by looking up the given list name in the device (device
+ * tree property) and requesting the GPIO for use. The property must exist
+ * in @dev's node.
+ *
+ * Use @flags to specify whether the GPIO should be an input or output. In
+ * principle this can also come from the device tree binding but most
+ * bindings don't provide this information. Specifically, when the GPIO uclass
+ * calls the xlate() method, it can return default flags, which are then
+ * ORed with this @flags.
+ *
+ * If we find that requesting the GPIO is not always needed we could add a
+ * new function or a new GPIOD_NO_REQUEST flag.
+ *
+ * At present driver model has no reference counting so if one device
+ * requests a GPIO which subsequently is unbound, the @desc->dev pointer
+ * will be invalid. However this will only happen if the GPIO device is
+ * unbound, not if it is removed, so this seems like a reasonable limitation
+ * for now. There is no real use case for unbinding drivers in normal
+ * operation.
+ *
+ * The device tree binding is doc/device-tree-bindings/gpio/gpio.txt in
+ * generate terms and each specific device may add additional details in
+ * a binding file in the same directory.
+ *
+ * @dev:	Device requesting the GPIO
+ * @list_name:	Name of GPIO list (e.g. "board-id-gpios")
+ * @index:	Index number of the GPIO in that list use request (0=first)
+ * @desc:	Returns GPIO description information. If there is no such
+ *		GPIO, dev->dev will be NULL.
+ * @flags:	Indicates the GPIO input/output settings (GPIOD_...)
+ * @return 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is
+ * something wrong with the list, or other -ve for another error (e.g.
+ * -EBUSY if a GPIO was already requested)
+ */
+int gpio_request_by_name(struct udevice *dev, const char *list_name,
+			 int index, struct gpio_desc *desc, int flags);
+
+/**
+ * gpio_request_list_by_name() - Request a list of GPIOs
+ *
+ * Reads all the GPIOs from a list and requetss them. See
+ * gpio_request_by_name() for additional details. Lists should not be
+ * misused to hold unrelated or optional GPIOs. They should only be used
+ * for things like parallel data lines. A zero phandle terminates the list
+ * the list.
+ *
+ * This function will either succeed, and request all GPIOs in the list, or
+ * fail and request none (it will free already-requested GPIOs in case of
+ * an error part-way through).
+ *
+ * @dev:	Device requesting the GPIO
+ * @list_name:	Name of GPIO list (e.g. "board-id-gpios")
+ * @desc_list:	Returns a list of GPIO description information
+ * @max_count:	Maximum number of GPIOs to return (@desc_list must be at least
+ *		this big)
+ * @flags:	Indicates the GPIO input/output settings (GPIOD_...)
+ * @return number of GPIOs requested, or -ve on error
+ */
+int gpio_request_list_by_name(struct udevice *dev, const char *list_name,
+			      struct gpio_desc *desc_list, int max_count,
+			      int flags);
+
+/**
+ * gpio_get_list_count() - Returns the number of GPIOs in a list
+ *
+ * Counts the GPIOs in a list. See gpio_request_by_name() for additional
+ * details.
+ *
+ * @dev:	Device requesting the GPIO
+ * @list_name:	Name of GPIO list (e.g. "board-id-gpios")
+ * @return number of GPIOs (0 for an empty property) or -ENOENT if the list
+ * does not exist
+ */
+int gpio_get_list_count(struct udevice *dev, const char *list_name);
+
+/**
+ * gpio_request_by_name_nodev() - request GPIOs without a device
+ *
+ * This is a version of gpio_request_list_by_name() that does not use a
+ * device. Avoid it unless the caller is not yet using driver model
+ */
+int gpio_request_by_name_nodev(const void *blob, int node,
+			       const char *list_name,
+			       int index, struct gpio_desc *desc, int flags);
+
+/**
+ * gpio_request_list_by_name_nodev() - request GPIOs without a device
+ *
+ * This is a version of gpio_request_list_by_name() that does not use a
+ * device. Avoid it unless the caller is not yet using driver model
+ */
+int gpio_request_list_by_name_nodev(const void *blob, int node,
+				    const char *list_name,
+				    struct gpio_desc *desc_list, int max_count,
+				    int flags);
+
+/**
+ * dm_gpio_free() - Free a single GPIO
+ *
+ * This frees a single GPIOs previously returned from gpio_request_by_name().
+ *
+ * @dev:	Device which requested the GPIO
+ * @desc:	GPIO to free
+ * @return 0 if OK, -ve on error
+ */
+int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc);
+
+/**
+ * gpio_free_list() - Free a list of GPIOs
+ *
+ * This frees a list of GPIOs previously returned from
+ * gpio_request_list_by_name().
+ *
+ * @dev:	Device which requested the GPIOs
+ * @desc:	List of GPIOs to free
+ * @count:	Number of GPIOs in the list
+ * @return 0 if OK, -ve on error
+ */
+int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count);
+
+/**
+ * gpio_free_list_nodev() - free GPIOs without a device
+ *
+ * This is a version of gpio_free_list() that does not use a
+ * device. Avoid it unless the caller is not yet using driver model
+ */
+int gpio_free_list_nodev(struct gpio_desc *desc, int count);
+
+/**
+ * dm_gpio_get_value() - Get the value of a GPIO
+ *
+ * This is the driver model version of the existing gpio_get_value() function
+ * and should be used instead of that.
+ *
+ * For now, these functions have a dm_ prefix since they conflict with
+ * existing names.
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @return GPIO value (0 for inactive, 1 for active) or -ve on error
+ */
+int dm_gpio_get_value(struct gpio_desc *desc);
+
+int dm_gpio_set_value(struct gpio_desc *desc, int value);
+
+/**
+ * dm_gpio_set_dir() - Set the direction for a GPIO
+ *
+ * This sets up the direction according tot the provided flags. It will do
+ * nothing unless the direction is actually specified.
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @return 0 if OK, -ve on error
+ */
+int dm_gpio_set_dir(struct gpio_desc *desc);
+
+/**
+ * dm_gpio_set_dir_flags() - Set direction using specific flags
+ *
+ * This is like dm_gpio_set_dir() except that the flags value is provided
+ * instead of being used from desc->flags. This is needed because in many
+ * cases the GPIO description does not include direction information.
+ * Note that desc->flags is updated by this function.
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @flags:	New flags to use
+ * @return 0 if OK, -ve on error, in which case desc->flags is not updated
+ */
+int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags);
+
+/**
+ * gpio_get_number() - Get the global GPIO number of a GPIO
+ *
+ * This should only be used for debugging or interest. It returns the nummber
+ * that should be used for gpio_get_value() etc. to access this GPIO.
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @return GPIO number, or -ve if not found
+ */
+int gpio_get_number(struct gpio_desc *desc);
+
 #endif	/* _ASM_GENERIC_GPIO_H_ */
diff --git a/include/common.h b/include/common.h
index 4b3e0d3bbd..97c8f79fc7 100644
--- a/include/common.h
+++ b/include/common.h
@@ -228,12 +228,13 @@ int run_command_list(const char *cmd, int len, int flag);
 extern char console_buffer[];
 
 /* arch/$(ARCH)/lib/board.c */
-void	board_init_f(ulong);
-void	board_init_r  (gd_t *, ulong) __attribute__ ((noreturn));
-int	checkboard    (void);
-int	checkflash    (void);
-int	checkdram     (void);
-int	last_stage_init(void);
+void board_init_f(ulong);
+void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
+int checkboard(void);
+int show_board_info(void);
+int checkflash(void);
+int checkdram(void);
+int last_stage_init(void);
 extern ulong monitor_flash_len;
 int mac_read_from_eeprom(void);
 extern u8 __dtb_dt_begin[];	/* embedded device tree blob */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 0004750518..76ce7deb95 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -19,13 +19,11 @@
 #include <configs/ti_am335x_common.h>
 
 #ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_FIT
 # define CONFIG_FIT
+#endif
 # define CONFIG_TIMESTAMP
 # define CONFIG_LZO
-# ifdef CONFIG_ENABLE_VBOOT
-#  define CONFIG_FIT_SIGNATURE
-#  define CONFIG_RSA
-# endif
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN		(16 << 20)
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index d68993bb1f..3ad4a9ba91 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -51,8 +51,6 @@
 /* PMIC */
 #define CONFIG_PMIC
 #define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX77686
-
 
 #define CONFIG_PREBOOT
 
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index ad63f3c549..0ba39a23dd 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -126,12 +126,11 @@
 #define SPI_FLASH_UBOOT_POS	(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 /* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
+#define CONFIG_DM_I2C
+#define CONFIG_DM_I2C_COMPAT
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h
index 671431397f..ae0e5ff47b 100644
--- a/include/configs/exynos5250-common.h
+++ b/include/configs/exynos5250-common.h
@@ -28,9 +28,6 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
-/* PMIC */
-#define CONFIG_POWER_MAX77686
-
 /* Sound */
 #define CONFIG_CMD_SOUND
 #ifdef CONFIG_CMD_SOUND
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index f08483487d..2384864eb0 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -575,12 +575,9 @@
 
 #define CONFIG_VERSION_VARIABLE
 
-#define CONFIG_FIT
-#define CONFIG_FIT_SIGNATURE
 #define CONFIG_IMAGE_FORMAT_LEGACY
 #define CONFIG_CMD_FDT
 #define CONFIG_CMD_HASH
-#define CONFIG_RSA
 #define CONFIG_SHA1
 #define CONFIG_SHA256
 
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 807e96bbaa..9d5dbdce36 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -177,12 +177,11 @@
 
 /* I2C */
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
+#define CONFIG_DM_I2C
+#define CONFIG_DM_I2C_COMPAT
 #define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
-#define CONFIG_MAX_I2C_NUM		8
-#define CONFIG_SYS_I2C_INIT_BOARD
 
 /* POWER */
 #define CONFIG_POWER
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 657f751f3c..e9d3f3226b 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -23,7 +23,6 @@
 
 #define CONFIG_BOOTSTAGE
 #define CONFIG_BOOTSTAGE_REPORT
-#define CONFIG_DM
 #define CONFIG_CMD_DEMO
 #define CONFIG_CMD_DM
 #define CONFIG_DM_DEMO
@@ -41,9 +40,6 @@
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_LMB
-#define CONFIG_FIT
-#define CONFIG_FIT_SIGNATURE
-#define CONFIG_RSA
 #define CONFIG_CMD_FDT
 #define CONFIG_ANDROID_BOOT_IMAGE
 
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 83953728dd..3b06d305db 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -18,6 +18,8 @@
 
 #include <configs/exynos5250-common.h>
 
+/* PMIC */
+#define CONFIG_POWER_MAX77686
 
 #define CONFIG_BOARD_COMMON
 #define CONFIG_ARCH_EARLY_INIT_R
diff --git a/include/configs/snow.h b/include/configs/snow.h
index 7eaa58697e..ce6676eae7 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -22,6 +22,7 @@
 
 #define CONFIG_CROS_EC_I2C		/* Support CROS_EC over I2C */
 #define CONFIG_POWER_TPS65090_I2C
+#define CONFIG_DM_CROS_EC
 
 #define CONFIG_BOARD_COMMON
 #define CONFIG_ARCH_EARLY_INIT_R
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 5ed86d9365..598526bf95 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -20,7 +20,9 @@
 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_DM
 # define CONFIG_DM
+#endif
 # define CONFIG_CMD_DM
 # define CONFIG_DM_GPIO
 # define CONFIG_DM_SERIAL
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 5a53c506c3..9ad47f6933 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -43,6 +43,9 @@
 #define CONFIG_SDRAM1_SIZE	0x10000000
 #endif
 
+#define CONFIG_I2C_EEPROM
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 /*
  * Support card address map
  */
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 2d28e89dd3..864528a5ea 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -276,17 +276,11 @@
 #define CONFIG_OF_LIBFDT
 
 /* FIT support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
 /* FDT support */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
-/* RSA support */
-#define CONFIG_FIT_SIGNATURE
-#define CONFIG_RSA
-
 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
diff --git a/include/cros_ec.h b/include/cros_ec.h
index 9e13146ecb..8457c80c5e 100644
--- a/include/cros_ec.h
+++ b/include/cros_ec.h
@@ -13,6 +13,7 @@
 #include <ec_commands.h>
 #include <fdtdec.h>
 #include <cros_ec_message.h>
+#include <asm/gpio.h>
 
 #ifndef CONFIG_DM_CROS_EC
 /* Which interface is the device on? */
@@ -39,7 +40,7 @@ struct cros_ec_dev {
 	unsigned int bus_num;		/* Bus number (for I2C) */
 	unsigned int max_frequency;	/* Maximum interface frequency */
 #endif
-	struct fdt_gpio_state ec_int;	/* GPIO used as EC interrupt line */
+	struct gpio_desc ec_int;	/* GPIO used as EC interrupt line */
 	int protocol_version;           /* Protocol version to use */
 	int optimise_flash_write;	/* Don't write erased flash blocks */
 
diff --git a/include/dm-demo.h b/include/dm-demo.h
index a24fec6658..03722d0c14 100644
--- a/include/dm-demo.h
+++ b/include/dm-demo.h
@@ -25,10 +25,14 @@ struct dm_demo_pdata {
 struct demo_ops {
 	int (*hello)(struct udevice *dev, int ch);
 	int (*status)(struct udevice *dev, int *status);
+	int (*set_light)(struct udevice *dev, int light);
+	int (*get_light)(struct udevice *dev);
 };
 
 int demo_hello(struct udevice *dev, int ch);
 int demo_status(struct udevice *dev, int *status);
+int demo_set_light(struct udevice *dev, int light);
+int demo_get_light(struct udevice *dev);
 int demo_list(void);
 
 int demo_parse_dt(struct udevice *dev);
diff --git a/include/dm/device.h b/include/dm/device.h
index 13598a15b6..81afa8c628 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -26,6 +26,9 @@ struct driver_info;
 /* DM should init this device prior to relocation */
 #define DM_FLAG_PRE_RELOC	(1 << 2)
 
+/* DM is responsible for allocating and freeing parent_platdata */
+#define DM_FLAG_ALLOC_PARENT_PDATA	(1 << 3)
+
 /**
  * struct udevice - An instance of a driver
  *
@@ -46,6 +49,7 @@ struct driver_info;
  * @driver: The driver used by this device
  * @name: Name of device, typically the FDT node name
  * @platdata: Configuration data for this device
+ * @parent_platdata: The parent bus's configuration data for this device
  * @of_offset: Device tree node offset for this device (- for none)
  * @of_id: Pointer to the udevice_id structure which created the device
  * @parent: Parent of this device, or NULL for the top level device
@@ -65,6 +69,7 @@ struct udevice {
 	struct driver *driver;
 	const char *name;
 	void *platdata;
+	void *parent_platdata;
 	int of_offset;
 	const struct udevice_id *of_id;
 	struct udevice *parent;
@@ -127,6 +132,7 @@ struct udevice_id {
  * @remove: Called to remove a device, i.e. de-activate it
  * @unbind: Called to unbind a device from its driver
  * @ofdata_to_platdata: Called before probe to decode device tree data
+ * @child_post_bind: Called after a new child has been bound
  * @child_pre_probe: Called before a child device is probed. The device has
  * memory allocated but it has not yet been probed.
  * @child_post_remove: Called after a child device is removed. The device
@@ -146,6 +152,9 @@ struct udevice_id {
  * device_probe_child() pass it in. So far the use case for allocating it
  * is SPI, but I found that unsatisfactory. Since it is here I will leave it
  * until things are clearer.
+ * @per_child_platdata_auto_alloc_size: A bus likes to store information about
+ * its children. If non-zero this is the size of this data, to be allocated
+ * in the child's parent_platdata pointer.
  * @ops: Driver-specific operations. This is typically a list of function
  * pointers defined by the driver, to implement driver functions required by
  * the uclass.
@@ -160,11 +169,13 @@ struct driver {
 	int (*remove)(struct udevice *dev);
 	int (*unbind)(struct udevice *dev);
 	int (*ofdata_to_platdata)(struct udevice *dev);
+	int (*child_post_bind)(struct udevice *dev);
 	int (*child_pre_probe)(struct udevice *dev);
 	int (*child_post_remove)(struct udevice *dev);
 	int priv_auto_alloc_size;
 	int platdata_auto_alloc_size;
 	int per_child_auto_alloc_size;
+	int per_child_platdata_auto_alloc_size;
 	const void *ops;	/* driver-specific operations */
 	uint32_t flags;
 };
@@ -184,6 +195,16 @@ struct driver {
 void *dev_get_platdata(struct udevice *dev);
 
 /**
+ * dev_get_parent_platdata() - Get the parent platform data for a device
+ *
+ * This checks that dev is not NULL, but no other checks for now
+ *
+ * @dev		Device to check
+ * @return parent's platform data, or NULL if none
+ */
+void *dev_get_parent_platdata(struct udevice *dev);
+
+/**
  * dev_get_parentdata() - Get the parent data for a device
  *
  * The parent data is data stored in the device but owned by the parent.
@@ -224,6 +245,14 @@ struct udevice *dev_get_parent(struct udevice *child);
  */
 ulong dev_get_of_data(struct udevice *dev);
 
+/*
+ * device_get_uclass_id() - return the uclass ID of a device
+ *
+ * @dev:	Device to check
+ * @return uclass ID for the device
+ */
+enum uclass_id device_get_uclass_id(struct udevice *dev);
+
 /**
  * device_get_child() - Get the child of a device by index
  *
diff --git a/include/dm/test.h b/include/dm/test.h
index f08c05da81..707c69e07f 100644
--- a/include/dm/test.h
+++ b/include/dm/test.h
@@ -67,6 +67,8 @@ enum {
 struct dm_test_priv {
 	int ping_total;
 	int op_count[DM_TEST_OP_COUNT];
+	int uclass_flag;
+	int uclass_total;
 };
 
 /**
@@ -88,6 +90,7 @@ struct dm_test_uclass_priv {
  *
  * @sum: Test value used to check parent data works correctly
  * @flag: Used to track calling of parent operations
+ * @uclass_flag: Used to track calling of parent operations by uclass
  */
 struct dm_test_parent_data {
 	int sum;
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index f17c3c2b38..91bb90dcfb 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -33,6 +33,7 @@ enum uclass_id {
 	UCLASS_I2C,		/* I2C bus */
 	UCLASS_I2C_GENERIC,	/* Generic I2C device */
 	UCLASS_I2C_EEPROM,	/* I2C EEPROM device */
+	UCLASS_MOD_EXP,		/* RSA Mod Exp device */
 
 	UCLASS_COUNT,
 	UCLASS_INVALID = -1,
diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h
index f718f37aff..f2f254a825 100644
--- a/include/dm/uclass-internal.h
+++ b/include/dm/uclass-internal.h
@@ -44,6 +44,17 @@ int uclass_bind_device(struct udevice *dev);
 int uclass_unbind_device(struct udevice *dev);
 
 /**
+ * uclass_pre_probe_child() - Deal with a child that is about to be probed
+ *
+ * Perform any pre-processing that is needed by the uclass before it can be
+ * probed.
+ *
+ * @dev:	Pointer to the device
+ * #return 0 on success, -ve on error
+ */
+int uclass_pre_probe_child(struct udevice *dev);
+
+/**
  * uclass_post_probe_device() - Deal with a device that has just been probed
  *
  * Perform any post-processing of a probed device that is needed by the
diff --git a/include/dm/uclass.h b/include/dm/uclass.h
index f6ec6d7e9f..d6c40c60dd 100644
--- a/include/dm/uclass.h
+++ b/include/dm/uclass.h
@@ -40,6 +40,9 @@ struct uclass {
 
 struct udevice;
 
+/* Members of this uclass sequence themselves with aliases */
+#define DM_UC_FLAG_SEQ_ALIAS			(1 << 0)
+
 /**
  * struct uclass_driver - Driver for the uclass
  *
@@ -52,6 +55,7 @@ struct udevice;
  * @pre_unbind: Called before a device is unbound from this uclass
  * @post_probe: Called after a new device is probed
  * @pre_remove: Called before a device is removed
+ * @child_post_bind: Called after a child is bound to a device in this uclass
  * @init: Called to set up the uclass
  * @destroy: Called to destroy the uclass
  * @priv_auto_alloc_size: If non-zero this is the size of the private data
@@ -60,8 +64,16 @@ struct udevice;
  * @per_device_auto_alloc_size: Each device can hold private data owned
  * by the uclass. If required this will be automatically allocated if this
  * value is non-zero.
+ * @per_child_auto_alloc_size: Each child device (of a parent in this
+ * uclass) can hold parent data for the device/uclass. This value is only
+ * used as a falback if this member is 0 in the driver.
+ * @per_child_platdata_auto_alloc_size: A bus likes to store information about
+ * its children. If non-zero this is the size of this data, to be allocated
+ * in the child device's parent_platdata pointer. This value is only used as
+ * a falback if this member is 0 in the driver.
  * @ops: Uclass operations, providing the consistent interface to devices
  * within the uclass.
+ * @flags: Flags for this uclass (DM_UC_...)
  */
 struct uclass_driver {
 	const char *name;
@@ -70,11 +82,16 @@ struct uclass_driver {
 	int (*pre_unbind)(struct udevice *dev);
 	int (*post_probe)(struct udevice *dev);
 	int (*pre_remove)(struct udevice *dev);
+	int (*child_post_bind)(struct udevice *dev);
+	int (*child_pre_probe)(struct udevice *dev);
 	int (*init)(struct uclass *class);
 	int (*destroy)(struct uclass *class);
 	int priv_auto_alloc_size;
 	int per_device_auto_alloc_size;
+	int per_child_auto_alloc_size;
+	int per_child_platdata_auto_alloc_size;
 	const void *ops;
+	uint32_t flags;
 };
 
 /* Declare a new uclass_driver */
@@ -141,6 +158,8 @@ int uclass_get_device_by_of_offset(enum uclass_id id, int node,
 /**
  * uclass_first_device() - Get the first device in a uclass
  *
+ * The device returned is probed if necessary, and ready for use
+ *
  * @id: Uclass ID to look up
  * @devp: Returns pointer to the first device in that uclass, or NULL if none
  * @return 0 if OK (found or not found), -1 on error
@@ -150,6 +169,8 @@ int uclass_first_device(enum uclass_id id, struct udevice **devp);
 /**
  * uclass_next_device() - Get the next device in a uclass
  *
+ * The device returned is probed if necessary, and ready for use
+ *
  * @devp: On entry, pointer to device to lookup. On exit, returns pointer
  * to the next device in the same uclass, or NULL if none
  * @return 0 if OK (found or not found), -1 on error
diff --git a/include/exports.h b/include/exports.h
index 41d5085e16..205affe72d 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -3,6 +3,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct spi_slave;
+
 /* These are declarations of exported functions available in C code */
 unsigned long get_version(void);
 int  getc(void);
@@ -10,22 +12,23 @@ int  tstc(void);
 void putc(const char);
 void puts(const char*);
 int printf(const char* fmt, ...);
-void install_hdlr(int, void (*interrupt_handler_t)(void *), void*);
+void install_hdlr(int, interrupt_handler_t, void*);
 void free_hdlr(int);
 void *malloc(size_t);
 void free(void*);
 void __udelay(unsigned long);
 unsigned long get_timer(unsigned long);
 int vprintf(const char *, va_list);
-unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
+unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base);
 int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
 char *getenv (const char *name);
 int setenv (const char *varname, const char *varvalue);
-long simple_strtol(const char *cp,char **endp,unsigned int base);
-int strcmp(const char * cs,const char * ct);
+long simple_strtol(const char *cp, char **endp, unsigned int base);
+int strcmp(const char *cs, const char *ct);
 unsigned long ustrtoul(const char *cp, char **endp, unsigned int base);
 unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base);
-#if defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C) && \
+		(!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT))
 int i2c_write (uchar, uint, int , uchar* , int);
 int i2c_read (uchar, uint, int , uchar* , int);
 #endif
@@ -34,15 +37,14 @@ void app_startup(char * const *);
 
 #endif    /* ifndef __ASSEMBLY__ */
 
-enum {
-#define EXPORT_FUNC(x) XF_ ## x ,
+struct jt_funcs {
+#define EXPORT_FUNC(impl, res, func, ...) res(*func)(__VA_ARGS__);
 #include <_exports.h>
 #undef EXPORT_FUNC
-
-	XF_MAX
 };
 
-#define XF_VERSION	6
+
+#define XF_VERSION	7
 
 #if defined(CONFIG_X86)
 extern gd_t *global_data;
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 8c2bd21b2d..231eed7892 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -115,9 +115,6 @@ enum fdt_compat_id {
 	COMPAT_NVIDIA_TEGRA20_USB,	/* Tegra20 USB port */
 	COMPAT_NVIDIA_TEGRA30_USB,	/* Tegra30 USB port */
 	COMPAT_NVIDIA_TEGRA114_USB,	/* Tegra114 USB port */
-	COMPAT_NVIDIA_TEGRA114_I2C,	/* Tegra114 I2C w/single clock source */
-	COMPAT_NVIDIA_TEGRA20_I2C,	/* Tegra20 i2c */
-	COMPAT_NVIDIA_TEGRA20_DVC,	/* Tegra20 dvc (really just i2c) */
 	COMPAT_NVIDIA_TEGRA20_EMC,	/* Tegra20 memory controller */
 	COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */
 	COMPAT_NVIDIA_TEGRA20_KBC,	/* Tegra20 Keyboard */
@@ -127,9 +124,6 @@ enum fdt_compat_id {
 	COMPAT_NVIDIA_TEGRA124_SDMMC,	/* Tegra124 SDMMC controller */
 	COMPAT_NVIDIA_TEGRA30_SDMMC,	/* Tegra30 SDMMC controller */
 	COMPAT_NVIDIA_TEGRA20_SDMMC,	/* Tegra20 SDMMC controller */
-	COMPAT_NVIDIA_TEGRA20_SFLASH,	/* Tegra 2 SPI flash controller */
-	COMPAT_NVIDIA_TEGRA20_SLINK,	/* Tegra 2 SPI SLINK controller */
-	COMPAT_NVIDIA_TEGRA114_SPI,	/* Tegra 114 SPI controller */
 	COMPAT_NVIDIA_TEGRA124_PCIE,	/* Tegra 124 PCIe controller */
 	COMPAT_NVIDIA_TEGRA30_PCIE,	/* Tegra 30 PCIe controller */
 	COMPAT_NVIDIA_TEGRA20_PCIE,	/* Tegra 20 PCIe controller */
@@ -140,7 +134,6 @@ enum fdt_compat_id {
 	COMPAT_SAMSUNG_S3C2440_I2C,	/* Exynos I2C Controller */
 	COMPAT_SAMSUNG_EXYNOS5_SOUND,	/* Exynos Sound */
 	COMPAT_WOLFSON_WM8994_CODEC,	/* Wolfson WM8994 Sound Codec */
-	COMPAT_SAMSUNG_EXYNOS_SPI,	/* Exynos SPI */
 	COMPAT_GOOGLE_CROS_EC,		/* Google CROS_EC Protocol */
 	COMPAT_GOOGLE_CROS_EC_KEYB,	/* Google CROS_EC Keyboard */
 	COMPAT_SAMSUNG_EXYNOS_EHCI,	/* Exynos EHCI controller */
@@ -178,38 +171,58 @@ enum fdt_compat_id {
 	COMPAT_COUNT,
 };
 
-/* GPIOs are numbered from 0 */
-enum {
-	FDT_GPIO_NONE = -1U,	/* an invalid GPIO used to end our list */
-
-	FDT_GPIO_ACTIVE_LOW = 1 << 0,	/* input is active low (else high) */
-};
-
-/* This is the state of a GPIO pin as defined by the fdt */
-struct fdt_gpio_state {
-	const char *name;	/* name of the fdt property defining this */
-	uint gpio;		/* GPIO number, or FDT_GPIO_NONE if none */
-	u8 flags;		/* FDT_GPIO_... flags */
+#define MAX_PHANDLE_ARGS 16
+struct fdtdec_phandle_args {
+	int node;
+	int args_count;
+	uint32_t args[MAX_PHANDLE_ARGS];
 };
 
-/* This tells us whether a fdt_gpio_state record is valid or not */
-#define fdt_gpio_isvalid(x) ((x)->gpio != FDT_GPIO_NONE)
-
 /**
- * Read the GPIO taking into account the polarity of the pin.
+ * fdtdec_parse_phandle_with_args() - Find a node pointed by phandle in a list
  *
- * @param gpio		pointer to the decoded gpio
- * @return value of the gpio if successful, < 0 if unsuccessful
- */
-int fdtdec_get_gpio(struct fdt_gpio_state *gpio);
-
-/**
- * Write the GPIO taking into account the polarity of the pin.
+ * This function is useful to parse lists of phandles and their arguments.
+ *
+ * Example:
+ *
+ * phandle1: node1 {
+ *	#list-cells = <2>;
+ * }
+ *
+ * phandle2: node2 {
+ *	#list-cells = <1>;
+ * }
+ *
+ * node3 {
+ *	list = <&phandle1 1 2 &phandle2 3>;
+ * }
+ *
+ * To get a device_node of the `node2' node you may call this:
+ * fdtdec_parse_phandle_with_args(blob, node3, "list", "#list-cells", 0, 1,
+ *				  &args);
+ *
+ * (This function is a modified version of __of_parse_phandle_with_args() from
+ * Linux 3.18)
+ *
+ * @blob:	Pointer to device tree
+ * @src_node:	Offset of device tree node containing a list
+ * @list_name:	property name that contains a list
+ * @cells_name:	property name that specifies the phandles' arguments count,
+ *		or NULL to use @cells_count
+ * @cells_count: Cell count to use if @cells_name is NULL
+ * @index:	index of a phandle to parse out
+ * @out_args:	optional pointer to output arguments structure (will be filled)
+ * @return 0 on success (with @out_args filled out if not NULL), -ENOENT if
+ *	@list_name does not exist, a phandle was not found, @cells_name
+ *	could not be found, the arguments were truncated or there were too
+ *	many arguments.
  *
- * @param gpio		pointer to the decoded gpio
- * @return 0 if successful
  */
-int fdtdec_set_gpio(struct fdt_gpio_state *gpio, int val);
+int fdtdec_parse_phandle_with_args(const void *blob, int src_node,
+				   const char *list_name,
+				   const char *cells_name,
+				   int cell_count, int index,
+				   struct fdtdec_phandle_args *out_args);
 
 /**
  * Find the next numbered alias for a peripheral. This is used to enumerate
@@ -592,50 +605,6 @@ const u32 *fdtdec_locate_array(const void *blob, int node,
 int fdtdec_get_bool(const void *blob, int node, const char *prop_name);
 
 /**
- * Decode a single GPIOs from an FDT.
- *
- * If the property is not found, then the GPIO structure will still be
- * initialised, with gpio set to FDT_GPIO_NONE. This makes it easy to
- * provide optional GPIOs.
- *
- * @param blob		FDT blob to use
- * @param node		Node to look at
- * @param prop_name	Node property name
- * @param gpio		gpio elements to fill from FDT
- * @return 0 if ok, -FDT_ERR_NOTFOUND if the property is missing.
- */
-int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name,
-		struct fdt_gpio_state *gpio);
-
-/**
- * Decode a list of GPIOs from an FDT. This creates a list of GPIOs with no
- * terminating item.
- *
- * @param blob         FDT blob to use
- * @param node         Node to look at
- * @param prop_name    Node property name
- * @param gpio         Array of gpio elements to fill from FDT. This will be
- *                     untouched if either 0 or an error is returned
- * @param max_count    Maximum number of elements allowed
- * @return number of GPIOs read if ok, -FDT_ERR_BADLAYOUT if max_count would
- * be exceeded, or -FDT_ERR_NOTFOUND if the property is missing.
- */
-int fdtdec_decode_gpios(const void *blob, int node, const char *prop_name,
-		struct fdt_gpio_state *gpio, int max_count);
-
-/**
- * Set up a GPIO pin according to the provided gpio information. At present this
- * just requests the GPIO.
- *
- * If the gpio is FDT_GPIO_NONE, no action is taken. This makes it easy to
- * deal with optional GPIOs.
- *
- * @param gpio		GPIO info to use for set up
- * @return 0 if all ok or gpio was FDT_GPIO_NONE; -1 on error
- */
-int fdtdec_setup_gpio(struct fdt_gpio_state *gpio);
-
-/**
  * Look in the FDT for a config item with the given name and return its value
  * as a 32-bit integer. The property must have at least 4 bytes of data. The
  * value of the first cell is returned.
diff --git a/include/hash.h b/include/hash.h
index d8ec4f08e1..f4eb100de0 100644
--- a/include/hash.h
+++ b/include/hash.h
@@ -17,7 +17,6 @@ enum {
 	HASH_FLAG_ENV		= 1 << 1,	/* Allow env vars */
 };
 
-#ifndef USE_HOSTCC
 #if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY)
 #define CONFIG_HASH_VERIFY
 #endif
@@ -77,6 +76,7 @@ struct hash_algo {
 			   int size);
 };
 
+#ifndef USE_HOSTCC
 /**
  * hash_command: Process a hash command for a particular algorithm
  *
@@ -115,6 +115,23 @@ int hash_block(const char *algo_name, const void *data, unsigned int len,
 	       uint8_t *output, int *output_size);
 
 /**
+ * hash_show() - Print out a hash algorithm and value
+ *
+ * You will get a message like this (without a newline at the end):
+ *
+ * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257"
+ *
+ * @algo:		Algorithm used for hash
+ * @addr:		Address of data that was hashed
+ * @len:		Length of data that was hashed
+ * @output:		Hash value to display
+ */
+void hash_show(struct hash_algo *algo, ulong addr, ulong len,
+	       uint8_t *output);
+
+#endif /* !USE_HOSTCC */
+
+/**
  * hash_lookup_algo() - Look up the hash_algo struct for an algorithm
  *
  * The function returns the pointer to the struct or -EPROTONOSUPPORT if the
@@ -128,18 +145,17 @@ int hash_block(const char *algo_name, const void *data, unsigned int len,
 int hash_lookup_algo(const char *algo_name, struct hash_algo **algop);
 
 /**
- * hash_show() - Print out a hash algorithm and value
+ * hash_progressive_lookup_algo() - Look up hash_algo for prog. hash support
  *
- * You will get a message like this (without a newline at the end):
+ * The function returns the pointer to the struct or -EPROTONOSUPPORT if the
+ * algorithm is not available with progressive hash support.
  *
- * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257"
+ * @algo_name: Hash algorithm to look up
+ * @algop: Pointer to the hash_algo struct if found
  *
- * @algo:		Algorithm used for hash
- * @addr:		Address of data that was hashed
- * @len:		Length of data that was hashed
- * @output:		Hash value to display
+ * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm.
  */
-void hash_show(struct hash_algo *algo, ulong addr, ulong len,
-	       uint8_t *output);
-#endif /* !USE_HOSTCC */
+int hash_progressive_lookup_algo(const char *algo_name,
+				 struct hash_algo **algop);
+
 #endif
diff --git a/include/i2c.h b/include/i2c.h
index 9c6a60cf9a..27fe00f173 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -39,8 +39,8 @@ enum dm_i2c_chip_flags {
  * An I2C chip is a device on the I2C bus. It sits at a particular address
  * and normally supports 7-bit or 10-bit addressing.
  *
- * To obtain this structure, use dev_get_parentdata(dev) where dev is the
- * chip to examine.
+ * To obtain this structure, use dev_get_parent_platdata(dev) where dev is
+ * the chip to examine.
  *
  * @chip_addr:	Chip address on bus
  * @offset_len: Length of offset in bytes. A single byte offset can
@@ -75,7 +75,7 @@ struct dm_i2c_bus {
 };
 
 /**
- * i2c_read() - read bytes from an I2C chip
+ * dm_i2c_read() - read bytes from an I2C chip
  *
  * To obtain an I2C device (called a 'chip') given the I2C bus address you
  * can use i2c_get_chip(). To obtain a bus by bus number use
@@ -91,13 +91,12 @@ struct dm_i2c_bus {
  *
  * @return 0 on success, -ve on failure
  */
-int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer,
-	     int len);
+int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len);
 
 /**
- * i2c_write() - write bytes to an I2C chip
+ * dm_i2c_write() - write bytes to an I2C chip
  *
- * See notes for i2c_read() above.
+ * See notes for dm_i2c_read() above.
  *
  * @dev:	Chip to write to
  * @offset:	Offset within chip to start writing
@@ -106,11 +105,11 @@ int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer,
  *
  * @return 0 on success, -ve on failure
  */
-int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
-	      int len);
+int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
+		 int len);
 
 /**
- * i2c_probe() - probe a particular chip address
+ * dm_i2c_probe() - probe a particular chip address
  *
  * This can be useful to check for the existence of a chip on the bus.
  * It is typically implemented by writing the chip address to the bus
@@ -122,8 +121,8 @@ int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
  * @devp:	Returns the device found, or NULL if none
  * @return 0 if a chip was found at that address, -ve if not
  */
-int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
-	      struct udevice **devp);
+int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
+		 struct udevice **devp);
 
 /**
  * i2c_set_bus_speed() - set the speed of a bus
@@ -185,6 +184,80 @@ int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len);
  */
 int i2c_deblock(struct udevice *bus);
 
+#ifdef CONFIG_DM_I2C_COMPAT
+/**
+ * i2c_probe() - Compatibility function for driver model
+ *
+ * Calls dm_i2c_probe() on the current bus
+ */
+int i2c_probe(uint8_t chip_addr);
+
+/**
+ * i2c_read() - Compatibility function for driver model
+ *
+ * Calls dm_i2c_read() with the device corresponding to @chip_addr, and offset
+ * set to @addr. @alen must match the current setting for the device.
+ */
+int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer,
+	     int len);
+
+/**
+ * i2c_write() - Compatibility function for driver model
+ *
+ * Calls dm_i2c_write() with the device corresponding to @chip_addr, and offset
+ * set to @addr. @alen must match the current setting for the device.
+ */
+int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer,
+	      int len);
+
+/**
+ * i2c_get_bus_num_fdt() - Compatibility function for driver model
+ *
+ * @return the bus number associated with the given device tree node
+ */
+int i2c_get_bus_num_fdt(int node);
+
+/**
+ * i2c_get_bus_num() - Compatibility function for driver model
+ *
+ * @return the 'current' bus number
+ */
+unsigned int i2c_get_bus_num(void);
+
+/**
+ * i2c_set_bus_num() - Compatibility function for driver model
+ *
+ * Sets the 'current' bus
+ */
+int i2c_set_bus_num(unsigned int bus);
+
+static inline void I2C_SET_BUS(unsigned int bus)
+{
+	i2c_set_bus_num(bus);
+}
+
+static inline unsigned int I2C_GET_BUS(void)
+{
+	return i2c_get_bus_num();
+}
+
+/**
+ * i2c_init() - Compatibility function for driver model
+ *
+ * This function does nothing.
+ */
+void i2c_init(int speed, int slaveaddr);
+
+/**
+ * board_i2c_init() - Compatibility function for driver model
+ *
+ * @param blob  Device tree blbo
+ * @return the number of I2C bus
+ */
+void board_i2c_init(const void *blob);
+
+#endif
+
 /*
  * Not all of these flags are implemented in the U-Boot API
  */
@@ -330,10 +403,12 @@ struct dm_i2c_ops {
  *
  * @bus:	Bus to examine
  * @chip_addr:	Chip address for the new device
+ * @offset_len:	Length of a register offset in bytes (normally 1)
  * @devp:	Returns pointer to new device if found or -ENODEV if not
  *		found
  */
-int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp);
+int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len,
+		 struct udevice **devp);
 
 /**
  * i2c_get_chip() - get a device to use to access a chip on a bus number
@@ -343,10 +418,12 @@ int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp);
  *
  * @busnum:	Bus number to examine
  * @chip_addr:	Chip address for the new device
+ * @offset_len:	Length of a register offset in bytes (normally 1)
  * @devp:	Returns pointer to new device if found or -ENODEV if not
  *		found
  */
-int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp);
+int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len,
+			    struct udevice **devp);
 
 /**
  * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data
diff --git a/include/image.h b/include/image.h
index d8618962fb..0e6af00c16 100644
--- a/include/image.h
+++ b/include/image.h
@@ -928,8 +928,9 @@ struct checksum_algo {
 #if IMAGE_ENABLE_SIGN
 	const EVP_MD *(*calculate_sign)(void);
 #endif
-	void (*calculate)(const struct image_region region[],
-			  int region_count, uint8_t *checksum);
+	int (*calculate)(const char *name,
+			 const struct image_region region[],
+			 int region_count, uint8_t *checksum);
 	const uint8_t *rsa_padding;
 };
 
diff --git a/include/sdhci.h b/include/sdhci.h
index aa4a0e9654..23893b5740 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -12,7 +12,7 @@
 
 #include <asm/io.h>
 #include <mmc.h>
-#include <fdtdec.h>
+#include <asm/gpio.h>
 
 /*
  * Controller registers
@@ -246,8 +246,8 @@ struct sdhci_host {
 	int index;
 
 	int bus_width;
-	struct fdt_gpio_state pwr_gpio;	/* Power GPIO */
-	struct fdt_gpio_state cd_gpio;		/* Card Detect GPIO */
+	struct gpio_desc pwr_gpio;	/* Power GPIO */
+	struct gpio_desc cd_gpio;		/* Card Detect GPIO */
 
 	void (*set_control_reg)(struct sdhci_host *host);
 	void (*set_clock)(int dev_index, unsigned int div);
diff --git a/include/spi.h b/include/spi.h
index ec17bd0bcc..c58e453559 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -56,20 +56,42 @@
 #define SPI_DEFAULT_WORDLEN 8
 
 #ifdef CONFIG_DM_SPI
+/* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */
 struct dm_spi_bus {
 	uint max_hz;
 };
 
+/**
+ * struct dm_spi_platdata - platform data for all SPI slaves
+ *
+ * This describes a SPI slave, a child device of the SPI bus. To obtain this
+ * struct from a spi_slave, use dev_get_parent_platdata(dev) or
+ * dev_get_parent_platdata(slave->dev).
+ *
+ * This data is immuatable. Each time the device is probed, @max_hz and @mode
+ * will be copied to struct spi_slave.
+ *
+ * @cs:		Chip select number (0..n-1)
+ * @max_hz:	Maximum bus speed that this slave can tolerate
+ * @mode:	SPI mode to use for this device (see SPI mode flags)
+ */
+struct dm_spi_slave_platdata {
+	unsigned int cs;
+	uint max_hz;
+	uint mode;
+};
+
 #endif /* CONFIG_DM_SPI */
 
 /**
  * struct spi_slave - Representation of a SPI slave
  *
  * For driver model this is the per-child data used by the SPI bus. It can
- * be accessed using dev_get_parentdata() on the slave device. Each SPI
- * driver should define this child data in its U_BOOT_DRIVER() definition:
- *
- *	.per_child_auto_alloc_size	= sizeof(struct spi_slave),
+ * be accessed using dev_get_parentdata() on the slave device. The SPI uclass
+ * sets uip per_child_auto_alloc_size to sizeof(struct spi_slave), and the
+ * driver should not override it. Two platform data fields (max_hz and mode)
+ * are copied into this structure to provide an initial value. This allows
+ * them to be changed, since we should never change platform data in drivers.
  *
  * If not using driver model, drivers are expected to extend this with
  * controller-specific data.
@@ -97,8 +119,8 @@ struct spi_slave {
 	uint mode;
 #else
 	unsigned int bus;
-#endif
 	unsigned int cs;
+#endif
 	u8 op_mode_rx;
 	u8 op_mode_tx;
 	unsigned int wordlen;
@@ -545,16 +567,16 @@ int spi_chip_select(struct udevice *slave);
 int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp);
 
 /**
- * spi_ofdata_to_platdata() - decode standard SPI platform data
+ * spi_slave_ofdata_to_platdata() - decode standard SPI platform data
  *
- * This decodes the speed and mode from a device tree node and puts it into
- * the spi_slave structure.
+ * This decodes the speed and mode for a slave from a device tree node
  *
  * @blob:	Device tree blob
  * @node:	Node offset to read from
- * @spi:	Place to put the decoded information
+ * @plat:	Place to put the decoded information
  */
-int spi_ofdata_to_platdata(const void *blob, int node, struct spi_slave *spi);
+int spi_slave_ofdata_to_platdata(const void *blob, int node,
+				 struct dm_spi_slave_platdata *plat);
 
 /**
  * spi_cs_info() - Check information on a chip select
diff --git a/include/u-boot/rsa-checksum.h b/include/u-boot/rsa-checksum.h
index c996fb3e4c..3c69d85ecb 100644
--- a/include/u-boot/rsa-checksum.h
+++ b/include/u-boot/rsa-checksum.h
@@ -16,9 +16,18 @@ extern const uint8_t padding_sha256_rsa4096[];
 extern const uint8_t padding_sha256_rsa2048[];
 extern const uint8_t padding_sha1_rsa2048[];
 
-void sha256_calculate(const struct image_region region[], int region_count,
-		      uint8_t *checksum);
-void sha1_calculate(const struct image_region region[], int region_count,
-		    uint8_t *checksum);
+/**
+ * hash_calculate() - Calculate hash over the data
+ *
+ * @name:  Name of algorithm to be used for hash calculation
+ * @region: Array having info of regions over which hash needs to be calculated
+ * @region_count: Number of regions in the region array
+ * @checksum: Buffer contanining the output hash
+ *
+ * @return 0 if OK, < 0 if error
+ */
+int hash_calculate(const char *name,
+		   const struct image_region region[], int region_count,
+		   uint8_t *checksum);
 
 #endif
diff --git a/include/u-boot/rsa-mod-exp.h b/include/u-boot/rsa-mod-exp.h
new file mode 100644
index 0000000000..fce445a082
--- /dev/null
+++ b/include/u-boot/rsa-mod-exp.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2014, Ruchika Gupta.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+*/
+
+#ifndef _RSA_MOD_EXP_H
+#define _RSA_MOD_EXP_H
+
+#include <errno.h>
+#include <image.h>
+
+/**
+ * struct key_prop - holder for a public key properties
+ *
+ * The struct has pointers to modulus (Typically called N),
+ * The inverse, R^2, exponent. These can be typecasted and
+ * used as byte arrays or converted to the required format
+ * as per requirement of RSA implementation.
+ */
+struct key_prop {
+	const void *rr;		/* R^2 can be treated as byte array */
+	const void *modulus;	/* modulus as byte array */
+	const void *public_exponent; /* public exponent as byte array */
+	uint32_t n0inv;		/* -1 / modulus[0] mod 2^32 */
+	int num_bits;		/* Key length in bits */
+	uint32_t exp_len;	/* Exponent length in number of uint8_t */
+};
+
+/**
+ * rsa_mod_exp_sw() - Perform RSA Modular Exponentiation in sw
+ *
+ * Operation: out[] = sig ^ exponent % modulus
+ *
+ * @sig:	RSA PKCS1.5 signature
+ * @sig_len:	Length of signature in number of bytes
+ * @node:	Node with RSA key elements like modulus, exponent, R^2, n0inv
+ * @out:	Result in form of byte array of len equal to sig_len
+ */
+int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len,
+		struct key_prop *node, uint8_t *out);
+
+int rsa_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t sig_len,
+		struct key_prop *node, uint8_t *out);
+
+/**
+ * struct struct mod_exp_ops - Driver model for RSA Modular Exponentiation
+ *				operations
+ *
+ * The uclass interface is implemented by all crypto devices which use
+ * driver model.
+ */
+struct mod_exp_ops {
+	/**
+	 * Perform Modular Exponentiation
+	 *
+	 * Operation: out[] = sig ^ exponent % modulus
+	 *
+	 * @dev:	RSA Device
+	 * @sig:	RSA PKCS1.5 signature
+	 * @sig_len:	Length of signature in number of bytes
+	 * @node:	Node with RSA key elements like modulus, exponent,
+	 *		R^2, n0inv
+	 * @out:	Result in form of byte array of len equal to sig_len
+	 *
+	 * This function computes exponentiation over the signature.
+	 * Returns: 0 if exponentiation is successful, or a negative value
+	 * if it wasn't.
+	 */
+	int (*mod_exp)(struct udevice *dev, const uint8_t *sig,
+			   uint32_t sig_len, struct key_prop *node,
+			   uint8_t *outp);
+};
+
+#endif