arm: Remove balloon3 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 242 deletions

diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
deleted file mode 100644
index 124a7663d6..0000000000
--- a/include/configs/balloon3.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Balloon3 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	__CONFIG_H
-#define	__CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
-#define	CONFIG_BALLOON3			1	/* Balloon3 board */
-
-/*
- * Environment settings
- */
-#define	CONFIG_ENV_OVERWRITE
-#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
-#define	CONFIG_ARCH_CPU_INIT
-#define	CONFIG_BOOTCOMMAND						\
-	"fpga load 0x0 0x50000 0x62638; "				\
-	"if usb reset && fatload usb 0 0xa4000000 uImage; then "	\
-		"bootm 0xa4000000; "					\
-	"fi; "								\
-	"bootm 0xd0000;"
-#define	CONFIG_BOOTARGS			"console=tty0 console=ttyS2,115200"
-#define	CONFIG_TIMESTAMP
-#define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
-#define	CONFIG_SYS_TEXT_BASE		0x0
-#define	CONFIG_LZMA			/* LZMA compression support */
-
-/*
- * Serial Console Configuration
- */
-#define	CONFIG_PXA_SERIAL
-#define	CONFIG_STUART			1
-#define CONFIG_CONS_INDEX		2
-#define	CONFIG_BAUDRATE			115200
-
-/*
- * Bootloader Components Configuration
- */
-#undef	CONFIG_CMD_ENV
-#define	CONFIG_CMD_USB
-#define	CONFIG_CMD_FPGA_LOADMK
-#undef	CONFIG_LCD
-
-/*
- * KGDB
- */
-#ifdef	CONFIG_CMD_KGDB
-#define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#endif
-
-/*
- * HUSH Shell Configuration
- */
-#define	CONFIG_SYS_HUSH_PARSER		1
-
-#define	CONFIG_SYS_LONGHELP
-#undef CONFIG_SYS_PROMPT
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT		"$ "
-#else
-#endif
-#define	CONFIG_SYS_CBSIZE		256
-#define	CONFIG_SYS_PBSIZE		\
-	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define	CONFIG_SYS_MAXARGS		16
-#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define	CONFIG_SYS_DEVICE_NULLDEV	1
-
-/*
- * Clock Configuration
- */
-#define	CONFIG_SYS_CPUSPEED		0x290		/* 520MHz */
-
-/*
- * DRAM Map
- */
-#define	CONFIG_NR_DRAM_BANKS		3		/* 3 banks of DRAM */
-#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
-#define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */
-#define	PHYS_SDRAM_2			0xb0000000	/* SDRAM Bank #2 */
-#define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */
-#define	PHYS_SDRAM_3			0x80000000	/* SDRAM Bank #3 */
-#define	PHYS_SDRAM_3_SIZE		0x08000000	/* 128 MB */
-
-#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
-#define	CONFIG_SYS_DRAM_SIZE		0x18000000	/* 384 MB DRAM */
-
-#define	CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
-#define	CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
-
-#define	CONFIG_SYS_LOAD_ADDR		0xa1000000
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		\
-	(PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048)
-
-/*
- * NOR FLASH
- */
-#ifdef	CONFIG_CMD_FLASH
-#define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-#define	PHYS_FLASH_SIZE			0x00800000	/* 8 MB */
-#define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-#define	CONFIG_SYS_FLASH_CFI
-#define	CONFIG_FLASH_CFI_DRIVER		1
-#define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
-
-#define	CONFIG_SYS_MAX_FLASH_BANKS	1
-#define	CONFIG_SYS_MAX_FLASH_SECT	256
-
-#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-
-#define	CONFIG_SYS_FLASH_ERASE_TOUT	240000
-#define	CONFIG_SYS_FLASH_WRITE_TOUT	240000
-#define	CONFIG_SYS_FLASH_LOCK_TOUT	240000
-#define	CONFIG_SYS_FLASH_UNLOCK_TOUT	240000
-#define	CONFIG_SYS_FLASH_PROTECTION
-#define	CONFIG_ENV_IS_IN_FLASH
-#else
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_ENV_IS_NOWHERE
-#endif
-
-#define	CONFIG_SYS_MONITOR_BASE		0x000000
-#define	CONFIG_SYS_MONITOR_LEN		0x40000
-
-#define	CONFIG_ENV_SIZE			0x2000
-#define	CONFIG_ENV_ADDR			0x40000
-#define	CONFIG_ENV_SECT_SIZE		0x10000
-
-/*
- * GPIO settings
- */
-#define	CONFIG_SYS_GPSR0_VAL	0x307dc7fd
-#define	CONFIG_SYS_GPSR1_VAL	0x03cffa4e
-#define	CONFIG_SYS_GPSR2_VAL	0x7131c000
-#define	CONFIG_SYS_GPSR3_VAL	0x01e1f3ff
-
-#define	CONFIG_SYS_GPCR0_VAL	0x0
-#define	CONFIG_SYS_GPCR1_VAL	0x0
-#define	CONFIG_SYS_GPCR2_VAL	0x0
-#define	CONFIG_SYS_GPCR3_VAL	0x0
-
-#define	CONFIG_SYS_GPDR0_VAL	0xc0f98e02
-#define	CONFIG_SYS_GPDR1_VAL	0xfcffa8b7
-#define	CONFIG_SYS_GPDR2_VAL	0x22e3ffff
-#define	CONFIG_SYS_GPDR3_VAL	0x000201fe
-
-#define	CONFIG_SYS_GAFR0_L_VAL	0x96c00000
-#define	CONFIG_SYS_GAFR0_U_VAL	0xa5e5459b
-#define	CONFIG_SYS_GAFR1_L_VAL	0x699b759a
-#define	CONFIG_SYS_GAFR1_U_VAL	0xaaa5a5aa
-#define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
-#define	CONFIG_SYS_GAFR2_U_VAL	0x01f9a6aa
-#define	CONFIG_SYS_GAFR3_L_VAL	0x54510003
-#define	CONFIG_SYS_GAFR3_U_VAL	0x00001599
-
-#define	CONFIG_SYS_PSSR_VAL	0x30
-
-/*
- * Clock settings
- */
-#define	CONFIG_SYS_CKEN		0xffffffff
-#define	CONFIG_SYS_CCCR		0x00000290
-
-/*
- * Memory settings
- */
-#define	CONFIG_SYS_MSC0_VAL	0x7ff07ff8
-#define	CONFIG_SYS_MSC1_VAL	0x7ff07ff0
-#define	CONFIG_SYS_MSC2_VAL	0x74a42491
-#define	CONFIG_SYS_MDCNFG_VAL	0x89d309d3
-#define	CONFIG_SYS_MDREFR_VAL	0x001d8018
-#define	CONFIG_SYS_MDMRS_VAL	0x00220022
-#define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL	0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define	CONFIG_SYS_MECR_VAL	0x00000000
-#define	CONFIG_SYS_MCMEM0_VAL	0x00014307
-#define	CONFIG_SYS_MCMEM1_VAL	0x00014307
-#define	CONFIG_SYS_MCATT0_VAL	0x0001c787
-#define	CONFIG_SYS_MCATT1_VAL	0x0001c787
-#define	CONFIG_SYS_MCIO0_VAL	0x0001430f
-#define	CONFIG_SYS_MCIO1_VAL	0x0001430f
-
-/*
- * LCD
- */
-#ifdef	CONFIG_LCD
-#define	CONFIG_BALLOON3LCD
-#define	CONFIG_VIDEO_LOGO
-#define	CONFIG_CMD_BMP
-#define	CONFIG_SPLASH_SCREEN
-#define	CONFIG_SPLASH_SCREEN_ALIGN
-#define	CONFIG_VIDEO_BMP_GZIP
-#define	CONFIG_VIDEO_BMP_RLE8
-#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
-#endif
-
-/*
- * USB
- */
-#ifdef	CONFIG_CMD_USB
-#define	CONFIG_USB_OHCI_NEW
-#define	CONFIG_SYS_USB_OHCI_CPU_INIT
-#define	CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define	CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000
-#define	CONFIG_SYS_USB_OHCI_SLOT_NAME	"balloon3"
-#define	CONFIG_USB_STORAGE
-#define	CONFIG_DOS_PARTITION
-#define	CONFIG_CMD_FAT
-#define	CONFIG_CMD_EXT2
-#endif
-
-/*
- * FPGA
- */
-#ifdef	CONFIG_CMD_FPGA
-#define	CONFIG_FPGA
-#define	CONFIG_FPGA_XILINX
-#define	CONFIG_FPGA_SPARTAN3
-#define	CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define	CONFIG_SYS_FPGA_WAIT	1000
-#define	CONFIG_MAX_FPGA_DEVICES	1
-#endif
-
-#endif	/* __CONFIG_H */