powerpc/85xx: Removed support for MPC8540EVAL board

The MPC8540EVAL board is no longer maintained and thus we are removing
support for it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 0 insertions, 362 deletions

diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
deleted file mode 100644
index a968949814..0000000000
--- a/include/configs/MPC8540EVAL.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Modified by Lunsheng Wang, lunsheng@sohu.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* mpc8540eval board configuration file */
-/* please refer to doc/README.mpc85xxads for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	    /* BOOKE			*/
-#define CONFIG_E500		1	    /* BOOKE e500 family	*/
-#define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
-#define CONFIG_MPC8540		1	    /* MPC8540 specific	        */
-#define CONFIG_MPC8540EVAL	1	    /* MPC8540EVAL board specific */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff80000
-
-#undef  CONFIG_PCI			    /* pci ethernet support	*/
-#define CONFIG_TSEC_ENET		    /* tsec ethernet support  */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
- * Not availabe for EVAL board
- */
-#undef CONFIG_RAM_AS_FLASH
-
-/* sysclk for MPC8540EVAL */
-#if defined(CONFIG_SYSCLK_66M)
-	/*
-	 * the oscillator on board is 66Mhz
-	 * can also get 66M clock from external PCI
-	 */
-	#define CONFIG_SYS_CLK_FREQ   66000000
-#else
-	#define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
-#undef  CONFIG_BTB			    /* toggle branch predition */
-
-#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
-
-#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time  */
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
-#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
-#endif
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
-#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
-
-#define CONFIG_SYS_SDRAM_SIZE		256             /* DDR is now 256MB     */
-
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-#else
-#define CONFIG_SYS_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/
-
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_SYS_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
-#define CONFIG_SYS_BR0_PRELIM          0xf8001801      /* port size 32bit */
-#else /* Boot from real Flash */
-#define CONFIG_SYS_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
-#define CONFIG_SYS_BR0_PRELIM		0xff801001	/* port size 16bit	*/
-#endif
-
-#define	CONFIG_SYS_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	64		/* sectors per device   */
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
-#define CONFIG_SYS_FLASH_CFI		1
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef  CONFIG_SYS_RAMBOOT
-#endif
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR1
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
-#define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL                      /* possible DLL fix needed */
-
-#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-/* local bus definitions */
-#define CONFIG_SYS_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
-#define CONFIG_SYS_OR2_PRELIM		0xfc006901
-#define CONFIG_SYS_LBC_LCRR		0x00030004	/* local bus freq divider*/
-#define CONFIG_SYS_LBC_LBCR		0x00000000
-#define CONFIG_SYS_LBC_LSRT		0x20000000
-#define CONFIG_SYS_LBC_MRTPR		0x20000000
-#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
-#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
-#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
-
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_SYS_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
-#else
-#define CONFIG_SYS_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
-#endif
-#define CONFIG_SYS_OR4_PRELIM          0xffffe1f1
-#define CONFIG_SYS_BCSR                (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-/* General PCI */
-#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCI_MEM_SIZE	0x20000000
-#define CONFIG_SYS_PCI_IO_BASE         0xe2000000
-
-#if defined(CONFIG_PCI)
-#define CONFIG_NET_MULTI
-#undef CONFIG_EEPRO100
-#define CONFIG_TULIP
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-#if !defined(CONFIG_PCI_PNP)
-#define PCI_ENET0_IOADDR      0xe0000000
-#define PCI_ENET0_MEMADDR     0xe0000000
-#define PCI_IDSEL_NUMBER      0x0c	/*slot0->3(IDSEL)=12->15*/
-#endif
-#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0008
-#elif defined(CONFIG_TSEC_ENET)
-#define CONFIG_NET_MULTI	1
-#define CONFIG_MII		1	/* MII PHY management	*/
-#define CONFIG_TSEC1    1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME      "TSEC0"
-#define CONFIG_TSEC2	1
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME      "TSEC1"
-#define CONFIG_MPC85XX_FEC      1
-#define CONFIG_HAS_ETH2
-#define CONFIG_MPC85XX_FEC_NAME                "FEC"
-#define TSEC1_PHY_ADDR          7
-#define	TSEC2_PHY_ADDR		4
-#define FEC_PHY_ADDR            2
-#define TSEC1_PHYIDX            0
-#define TSEC2_PHYIDX            0
-#define FEC_PHYIDX              0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define FEC_FLAGS		0
-
-/* Options are: TSEC[0-1], FEC */
-#define CONFIG_ETHPRIME                "TSEC0"
-
-#define CONFIG_PHY_M88E1011     1       /* GigaBit Ether PHY    */
-#define INTEL_LXT971_PHY	1
-#endif
-
-/* Environment */
-#ifndef CONFIG_SYS_RAMBOOT
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x100000)
-#define CONFIG_ENV_SIZE		0x2000
-#else
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#endif
-#define CONFIG_ENV_SIZE		0x2000
-#else
-/* #define CONFIG_SYS_NO_FLASH		1 */	/* Flash is not usable now	*/
-#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*****************************/
-/* Environment Configuration */
-/*****************************/
-/* The mac addresses for all ethernet interface */
-/* NOTE: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR  00:01:af:07:9b:8a
-#define CONFIG_ETH1ADDR  00:01:af:07:9b:8b
-#define CONFIG_ETH2ADDR  00:01:af:07:9b:8c
-#endif
-
-#define CONFIG_ROOTPATH  /nfsroot
-#define CONFIG_BOOTFILE  your.uImage
-
-#define CONFIG_SERVERIP         192.168.101.1
-#define CONFIG_IPADDR           192.168.101.11
-#define CONFIG_GATEWAYIP        192.168.101.0
-#define CONFIG_NETMASK          255.255.255.0
-
-#define CONFIG_LOADADDR  200000   /* default location for tftp and bootm */
-
-#define CONFIG_HOSTNAME         MPC8540EVAL
-
-#endif	/* __CONFIG_H */