armv8/ls1043aqds: add QSPI support in SD boot

QSPI and IFC are pin-multiplexed on LS1043A. So we use
ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and
ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>

2 files changed, 37 insertions, 0 deletions

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 35d97508a8..8900daee95 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -121,6 +121,7 @@
 #endif
 
 /* IFC */
+#ifndef CONFIG_SD_BOOT_QSPI
 #define CONFIG_FSL_IFC
 /*
  * CONFIG_SYS_FLASH_BASE has the final address (core view)
@@ -139,6 +140,7 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
 #endif
+#endif
 
 /* I2C */
 #define CONFIG_CMD_I2C
@@ -205,9 +207,11 @@
 #define CONFIG_SPI_FLASH_STMICRO	/* cs0 */
 #define CONFIG_SPI_FLASH_SST		/* cs1 */
 #define CONFIG_SPI_FLASH_EON		/* cs2 */
+#ifndef CONFIG_SD_BOOT_QSPI
 #define CONFIG_SF_DEFAULT_BUS		1
 #define CONFIG_SF_DEFAULT_CS		0
 #endif
+#endif
 
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 
@@ -216,9 +220,18 @@
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
 
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		1000000
+#define CONFIG_ENV_SPI_MODE		0x03
+#else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 /* FMan fireware Pre-load address */
 #define CONFIG_SYS_FMAN_FW_ADDR		0x60300000
+#endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index e6725e3be8..60d189bf09 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -85,8 +85,13 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_SD_BOOT
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+	board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
+#else
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
 #endif
+#endif
 
 /* LPUART */
 #ifdef CONFIG_LPUART
@@ -113,6 +118,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * IFC Definitions
  */
+#ifndef CONFIG_SD_BOOT_QSPI
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 				CSPR_PORT_SIZE_16 | \
@@ -196,6 +202,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#endif
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
@@ -203,6 +210,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
 #endif
 
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#endif
+
 /*
  * QIXIS Definitions
  */
@@ -219,6 +232,7 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_ALTBANK		0x04
 #define QIXIS_LBMAP_NAND		0x09
 #define QIXIS_LBMAP_SD			0x00
+#define QIXIS_LBMAP_SD_QSPI		0xff
 #define QIXIS_RCW_SRC_NAND		0x106
 #define QIXIS_RCW_SRC_SD		0x040
 #define QIXIS_RST_CTL_RESET		0x41
@@ -347,6 +361,16 @@ unsigned long get_board_ddr_clk(void);
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
 
+/* QSPI device */
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_FSL_QSPI
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+#endif
+#endif
+
 /*
  * Miscellaneous configurable options
  */