Merge branch 'master' of git://git.denx.de/u-boot-atmel

9 files changed, 287 insertions, 304 deletions

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
new file mode 100644
index 0000000000..dedb7857ad
--- /dev/null
+++ b/include/configs/at91-sama5_common.h
@@ -0,0 +1,87 @@
+/*
+ * Common part of configuration settings for the AT91 SAMA5 board.
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Josh Wu <josh.wu@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __AT91_SAMA5_COMMON_H
+#define __AT91_SAMA5_COMMON_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE		0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
+
+#define CONFIG_ARCH_CPU_INIT
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT		/* Device Tree support */
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+#define CONFIG_BOOTDELAY		3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
+	"256K(env),256k(evn_redundent),256k(spare),"			\
+	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
+	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+
+#endif
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index db5d5ea846..e4c49f4c14 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -203,4 +203,62 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x300000
+#define CONFIG_SPL_MAX_SIZE		0x010000
+#define CONFIG_SPL_STACK		0x310000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+
+#define CONFIG_SYS_MONITOR_LEN		0x80000
+
+#ifdef CONFIG_SYS_USE_MMC
+
+#define CONFIG_SPL_BSS_START_ADDR	0x70000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x00080000
+#define CONFIG_SYS_SPL_MALLOC_START	0x70080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
+
+#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE		256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
+					  48, 49, 50, 51, 52, 53, 54, 55, \
+					  56, 57, 58, 59, 60, 61, 62, 63, }
+#endif
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK		132096000
+#define CONFIG_SYS_AT91_PLLA		0x20c73f03
+#define CONFIG_SYS_MCKR			0x1301
+#define CONFIG_SYS_MCKR_CSS		0x1302
+
+#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC0
 #endif
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index f02fce95b3..c44da1c19e 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -201,11 +201,22 @@
 #else /* CONFIG_SYS_USE_MMC */
 
 /* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_IS_IN_MMC
-/* For FAT system, most cases it should be in the reserved sector */
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+/* Use raw reserved sectors to save environment */
 #define CONFIG_ENV_OFFSET		0x2000
 #define CONFIG_ENV_SIZE			0x1000
 #define CONFIG_SYS_MMC_ENV_DEV		0
+#else
+/* Use file in FAT file to save environment */
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define FAT_ENV_INTERFACE		"mmc"
+#define FAT_ENV_FILE			"uboot.env"
+#define FAT_ENV_DEVICE_AND_PART		"0"
+#define CONFIG_ENV_SIZE			0x4000
+#endif
+
 #define CONFIG_BOOTCOMMAND						\
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};"	\
 	"fatload mmc 0:1 0x21000000 dtb;"				\
@@ -228,6 +239,62 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	(4 * 1024 * 1024)
-#define CONFIG_STACKSIZE	(32 * 1024)	/* regular stack */
+
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x300000
+#define CONFIG_SPL_MAX_SIZE		0x6000
+#define CONFIG_SPL_STACK		0x308000
+
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#define CONFIG_SYS_MASTER_CLOCK		132096000
+#define CONFIG_SYS_AT91_PLLA		0x20953f03
+#define CONFIG_SYS_MCKR			0x1301
+#define CONFIG_SYS_MCKR_CSS		0x1302
+
+#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+
+#elif CONFIG_SYS_USE_SPIFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
+
+#endif
 
 #endif
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 6d8b71dced..1a481b3fd1 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -243,4 +243,61 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
 
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x300000
+#define CONFIG_SPL_MAX_SIZE		0x6000
+#define CONFIG_SPL_STACK		0x308000
+
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#define CONFIG_SYS_MASTER_CLOCK		132096000
+#define CONFIG_SYS_AT91_PLLA		0x20c73f03
+#define CONFIG_SYS_MCKR			0x1301
+#define CONFIG_SYS_MCKR_CSS		0x1302
+
+#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+
+#elif CONFIG_SYS_USE_SPIFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
+
+#endif
+
 #endif
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index ace511f765..f5b8f9b442 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -16,9 +16,6 @@
 
 #include <asm/hardware.h>
 
-#define MACH_TYPE_CORVUS               2066
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_CORVUS
 #define CONFIG_SYS_GENERIC_BOARD
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index c82728e999..bfd8aa7e6c 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -10,30 +10,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT		/* Device Tree support */
-
-#define CONFIG_SYS_GENERIC_BOARD
+/* No NOR flash, this definition should put before common header */
+#define CONFIG_SYS_NO_FLASH
 
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
+#include "at91-sama5_common.h"
 
 /* serial console */
 #define CONFIG_ATMEL_USART
@@ -51,29 +31,6 @@
  */
 #define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
 
-#define CONFIG_BOOTDELAY		3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
@@ -181,34 +138,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"root=/dev/mmcblk0p2 rw rootwait"
-#else
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256K(env),256k(evn_redundent),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
-#endif
-
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index a99b559da6..d933a9e7c6 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -13,30 +13,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT		/* Device Tree support */
-
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
+/*
+ * If has No NOR flash, please put the definition: CONFIG_SYS_NO_FLASH
+ * before the common header.
+ */
+#include "at91-sama5_common.h"
 
 /* serial console */
 #define CONFIG_ATMEL_USART
@@ -69,40 +50,17 @@
 /* board specific (not enough SRAM) */
 #define CONFIG_SAMA5D3_LCD_BASE		0x23E00000
 
-#define CONFIG_BOOTDELAY		3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
 /* NOR flash */
+#ifndef CONFIG_SYS_NO_FLASH
 #define CONFIG_CMD_FLASH
-
-#ifdef CONFIG_CMD_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_SYS_FLASH_BASE		0x10000000
 #define CONFIG_SYS_MAX_FLASH_SECT	131
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
-#else
-#define CONFIG_SYS_NO_FLASH
 #endif
 
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
@@ -228,34 +186,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"root=/dev/mmcblk0p2 rw rootwait"
-#else
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256K(env),256k(evn_redundent),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
-#endif
-
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
-
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 4cb0761520..5fb621ec85 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -10,59 +10,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT		/* Device Tree support */
-
-#define CONFIG_SYS_GENERIC_BOARD
+/* No NOR flash, this definition should put before common header */
+#define CONFIG_SYS_NO_FLASH
 
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
+#include "at91-sama5_common.h"
 
 /* serial console */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_USART3
 #define CONFIG_USART_ID			ATMEL_ID_USART3
 
-#define CONFIG_BOOTDELAY		3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SETEXPR
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
@@ -199,33 +156,6 @@
 				"bootz 0x22000000 - 0x21000000"
 #endif
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"root=/dev/mmcblk0p2 rw rootwait"
-#else
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256K(env),256k(evn_redundent),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
-#endif
-
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 
 /* SPL */
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 897d4819f8..546d7a3a9f 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -10,59 +10,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT		/* Device Tree support */
-
-#define CONFIG_SYS_GENERIC_BOARD
+/* No NOR flash, this definition should put before common header */
+#define CONFIG_SYS_NO_FLASH
 
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
+#include "at91-sama5_common.h"
 
 /* serial console */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_USART3
 #define	CONFIG_USART_ID			ATMEL_ID_USART3
 
-#define CONFIG_BOOTDELAY		3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SETEXPR
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
@@ -197,35 +154,6 @@
 				"bootz 0x22000000 - 0x21000000"
 #endif
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"root=/dev/mmcblk0p2 rw rootwait"
-#else
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256K(env),256k(evn_redundent),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
-#endif
-
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x200000