net: Improve the speed of netconsole

Previously u-boot would initialize the network interface for every
network operation and then shut it down again.  This makes sense for
most operations where the network in not known to be needed soon after
the operation is complete.  In the case of netconsole, it will use the
network for every interaction with the shell or every printf.  This
means that the network is being reinitialized very often.  On many
devices, this intialization is very slow.

This patch checks for consecutive netconsole actions and leaves the
ethernet hardware initialized between them.  It will still behave the
same old way for all other network operations and any time another
network operation happens between netconsole operations.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>

1 files changed, 41 insertions, 1 deletions

diff --git a/include/net.h b/include/net.h
index 6d2d6cd849..e193b7b60b 100644
--- a/include/net.h
+++ b/include/net.h
@@ -102,7 +102,14 @@ extern int eth_register(struct eth_device* dev);/* Register network device */
 extern int eth_unregister(struct eth_device *dev);/* Remove network device */
 extern void eth_try_another(int first_restart);	/* Change the device */
 extern void eth_set_current(void);		/* set nterface to ethcur var */
-extern struct eth_device *eth_get_dev(void);	/* get the current device MAC */
+/* get the current device MAC */
+static inline __attribute__((always_inline))
+struct eth_device *eth_get_dev(void)
+{
+	extern struct eth_device *eth_current;
+
+	return eth_current;
+}
 extern struct eth_device *eth_get_dev_by_name(const char *devname);
 extern struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */
 extern int eth_get_dev_index(void);		/* get the device index */
@@ -151,6 +158,19 @@ extern int eth_rx(void);			/* Check for received packets */
 extern void eth_halt(void);			/* stop SCC */
 extern char *eth_get_name(void);		/* get name of current device */
 
+/* Set active state */
+static inline __attribute__((always_inline)) int eth_init_state_only(bd_t *bis)
+{
+	eth_get_dev()->state = ETH_STATE_ACTIVE;
+
+	return 0;
+}
+/* Set passive state */
+static inline __attribute__((always_inline)) void eth_halt_state_only(void)
+{
+	eth_get_dev()->state = ETH_STATE_PASSIVE;
+}
+
 /*
  * Set the hardware address for an ethernet interface based on 'eth%daddr'
  * environment variable (or just 'ethaddr' if eth_number is 0).
@@ -532,6 +552,26 @@ void NcStart(void);
 int nc_input_packet(uchar *pkt, unsigned dest, unsigned src, unsigned len);
 #endif
 
+static inline __attribute__((always_inline)) int eth_is_on_demand_init(void)
+{
+#ifdef CONFIG_NETCONSOLE
+	extern enum proto_t net_loop_last_protocol;
+
+	return net_loop_last_protocol != NETCONS;
+#else
+	return 1;
+#endif
+}
+
+static inline void eth_set_last_protocol(int protocol)
+{
+#ifdef CONFIG_NETCONSOLE
+	extern enum proto_t net_loop_last_protocol;
+
+	net_loop_last_protocol = protocol;
+#endif
+}
+
 /*
  * Check if autoload is enabled. If so, use either NFS or TFTP to download
  * the boot file.