ARM: remove broken "shannon" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Rolf Offermanns <rof@sysgo.de>

1 files changed, 0 insertions, 223 deletions

diff --git a/include/configs/shannon.h b/include/configs/shannon.h
deleted file mode 100644
index fce4121450..0000000000
--- a/include/configs/shannon.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Configuation settings for the Shannon/TuxScreen/IS2630 WebPhone Board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Since we use the Inferno-Loader to bring us to live,
- * we skip the lowlevel init stuff.
- * But U-Boot still relocates itself into RAM
- */
-#define CONFIG_INFERNO			/* we are using the inferno bootldr */
-#define CONFIG_SKIP_LOWLEVEL_INIT	1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1100		1	/* This is an SA1100 CPU	*/
-#define CONFIG_SHANNON		1	/* on an SHANNON/TuxScreen Board      */
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_3C589	1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL3          1	/* we use SERIAL 3  */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"root=ramfs devfs=mount console=ttySA0,115200"
-#define CONFIG_NETMASK          255.255.0.0
-#define CONFIG_BOOTCOMMAND	"help"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"TuxScreen # "	/* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0xd0000000	/* default load address	*/
-
-#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED		0x09		/* 190 MHz for Shannon */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_DOS_PARTITION	1		/* DOS partitiion support */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-/* BE CAREFUL */
-#define CONFIG_NR_DRAM_BANKS	4	   /* we have 4 banks of EDORAM */
-#define PHYS_SDRAM_1		0xc0000000 /* RAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x00400000 /* 4 MB */
-#define PHYS_SDRAM_2		0xc8000000 /* RAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE	0x00400000 /* 4 MB */
-#define PHYS_SDRAM_3            0xd0000000 /* RAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE       0x00400000 /* 4 MB */
-#define PHYS_SDRAM_4            0xd8000000 /* RAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE       0x00400000 /* 4 MB */
-
-
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	(31+4)	/* max number of sectors on one chip	*/
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#ifdef CONFIG_INFERNO
-/* we take the last sector, 128 KB in size, but we only use 16 KB of it for stack reasons */
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x003E0000)	/* Addr of Environment Sector	*/
-#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment 	*/
-#define CONFIG_ENV_SECT_SIZE	(128 << 10)	/* size of environment sector */
-#else
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
-#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment 	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-
-/* we pick the upper one */
-
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0x20000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0x24000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0x2C000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0x28000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-
-/* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define	CONFIG_IDE_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_PCMCIA		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-/* it's simple, all regs are in I/O space */
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_ATTRB_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	0
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	0
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0
-
-/*-----------------------------------------------------------------------
- */
-
-#endif	/* __CONFIG_H */