rockchip: rk3036: Add core Soc start-up code

rk3036 only 4K size SRAM for SPL, so only support
timer, uart, sdram driver in SPL stage, when finish
initial sdram, back to bootrom.And in rk3036 sdmmc and
debug uart use same iomux, so if you want to boot from
sdmmc, you must disable debug uart.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Fixed build error for chromebook_jerry, firefly-rk3288:
Signed-off-by: Simon Glass <sjg@chromium.org>

Series-changes: 8
- Fix build error for chromebook_jerry, firefly-rk3288

1 files changed, 103 insertions, 0 deletions

diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
new file mode 100644
index 0000000000..525fabc5b7
--- /dev/null
+++ b/include/configs/rk3036_common.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#ifndef __CONFIG_RK3036_COMMON_H
+#define __CONFIG_RK3036_COMMON_H
+
+#include <asm/arch/hardware.h>
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_MALLOC_LEN		(32 << 20)
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_TIMER_RATE		(24 * 1000 * 1000)
+#define CONFIG_SYS_TIMER_BASE		0x200440a0 /* TIMER5 */
+#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMER_BASE + 8)
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_MEM32
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SYS_TEXT_BASE		0x60000000
+#define CONFIG_SYS_INIT_SP_ADDR		0x60100000
+#define CONFIG_SYS_LOAD_ADDR		0x60800800
+#define CONFIG_SPL_STACK		0x10081fff
+#define CONFIG_SPL_TEXT_BASE		0x10081004
+
+#define CONFIG_ROCKCHIP_MAX_INIT_SIZE	(4 << 10)
+#define CONFIG_ROCKCHIP_CHIP_TAG	"RK30"
+
+#define CONFIG_ROCKCHIP_COMMON
+
+/* MMC/SD IP block */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_TIME
+
+#define CONFIG_SYS_SDRAM_BASE		0x60000000
+#define CONFIG_NR_DRAM_BANKS		1
+#define SDRAM_BANK_SIZE			(512UL << 20UL)
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_GIGADEVICE
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+
+#define CONFIG_CMD_I2C
+
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"scriptaddr=0x60000000\0" \
+	"pxefile_addr_r=0x60100000\0" \
+	"fdt_addr_r=0x61f00000\0" \
+	"kernel_addr_r=0x62000000\0" \
+	"ramdisk_addr_r=0x64000000\0"
+
+/* First try to boot from SD (index 0), then eMMC (index 1 */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>
+
+/* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board,
+ * so limit the fdt reallocation to that */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"fdt_high=0x7fffffff\0" \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTENV
+#endif
+
+#endif