ARM: OMAP4: Rename to ti_omap4_common.h

Follow the pattern ti_<processor family>_common.h used by other TI processors
to be coherent. So just rename omap4_common.h to ti_omap4_common.h.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Reviewed-by:  Lokesh Vutla <lokeshvutla@ti.com>

1 files changed, 0 insertions, 162 deletions

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
deleted file mode 100644
index d099bfd48a..0000000000
--- a/include/configs/omap4_common.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated.
- * Aneesh V       <aneesh@ti.com>
- * Steve Sakoman  <steve@sakoman.com>
- *
- * TI OMAP4 common configuration settings
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_OMAP4_COMMON_H
-#define __CONFIG_OMAP4_COMMON_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP44XX		1	/* which is a 44XX */
-#define CONFIG_OMAP4430		1	/* which is in a 4430 */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_SYS_THUMB_BUILD
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310		1
-#define CONFIG_SYS_PL310_BASE	0x48242000
-#endif
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT2_BASE
-
-/*
- * Total Size Environment - 128k
- */
-#define CONFIG_ENV_SIZE			(128 << 10)
-
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method.  Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-#include <configs/ti_armv7_common.h>
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		48000000
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		UART3_BASE
-
-/* TWL6030 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6030_POWER		1
-#endif
-
-/* USB */
-#define CONFIG_MUSB_UDC			1
-#define CONFIG_USB_OMAP3		1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-
-/* Per-Soc commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-/*
- * Environment setup
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
-	"console=ttyO2,115200n8\0" \
-	"fdt_high=0xffffffff\0" \
-	"fdtaddr=0x80f80000\0" \
-	"fdtfile=undefined\0" \
-	"bootpart=0:2\0" \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"usbtty=cdc_acm\0" \
-	"vram=16M\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"vram=${vram} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-		"source ${loadaddr}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
-		"run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"findfdt="\
-		"if test $board_name = sdp4430; then " \
-			"setenv fdtfile omap4-sdp.dtb; fi; " \
-		"if test $board_name = panda; then " \
-			"setenv fdtfile omap4-panda.dtb; fi;" \
-		"if test $board_name = panda-a4; then " \
-			"setenv fdtfile omap4-panda-a4.dtb; fi;" \
-		"if test $board_name = panda-es; then " \
-			"setenv fdtfile omap4-panda-es.dtb; fi;" \
-		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loadbootenv; then " \
-				"run importbootenv; " \
-			"fi;" \
-			"if test -n ${uenvcmd}; then " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-		"fi;" \
-		"if run loadimage; then " \
-			"run loadfdt;" \
-			"run mmcboot; " \
-		"fi; " \
-	"fi"
-
-/*
- * Defines for SPL
- * It is known that this will break HS devices. Since the current size of
- * SPL is overlapped with public stack and breaking non HS devices to boot.
- * So moving TEXT_BASE down to non-HS limit.
- */
-#define CONFIG_SPL_TEXT_BASE		0x40300000
-#define CONFIG_SPL_MAX_SIZE		(0x4030C000 - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_DISPLAY_PRINT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-#endif /* __CONFIG_OMAP4_COMMON_H */