Add esd cpci5200 and pf5200 boards

Patch by Reinhard Arlt, 22 Aug 2005

1 files changed, 415 insertions, 0 deletions

diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
new file mode 100644
index 0000000000..3898f91282
--- /dev/null
+++ b/include/configs/cpci5200.h
@@ -0,0 +1,415 @@
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+
+ */
+
+/*************************************************************************
+ * (c) 2005 esd gmbh Hannover
+ *
+ *
+ * from IceCube.h file
+ * by Reinhard Arlt reinhard.arlt@esd-electronics.com
+ *
+ *************************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5200		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_ICECUBE		1	/* ... on IceCube board	  */
+#define CONFIG_CPCI5200		1	/* ... on CPCI5200  board */
+#define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM	  */
+
+#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
+#define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#if 1
+#define CONFIG_PCI		1
+#if 1
+#define CONFIG_PCI_PNP		1
+#endif
+#define CONFIG_PCI_SCAN_SHOW	1
+
+#define CONFIG_PCI_MEM_BUS	0x40000000
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x10000000
+
+#define CONFIG_PCI_IO_BUS	0x50000000
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x01000000
+#endif
+#if 0				/* test-only !!! */
+#define CONFIG_NET_MULTI	1
+#define CONFIG_EEPRO100		1
+#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_NS8382X		1
+#endif
+
+#define ADD_PCI_CMD		CFG_CMD_PCI
+
+#else				/* MPC5100 */
+
+#define ADD_PCI_CMD		0	/* no CFG_CMD_PCI */
+
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#if 0
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#else
+#define ADD_USB_CMD		0
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
+				 CFG_CMD_EEPROM	| \
+				 CFG_CMD_FAT	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_BSP	| \
+				 CFG_CMD_ELF	| \
+				 CFG_CMD_EXT2	| \
+				 CFG_CMD_DATE	| \
+				 ADD_PCI_CMD	  )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
+#   define CFG_LOWBOOT		1
+#   define CFG_LOWBOOT16	1
+#endif
+#if (TEXT_BASE == 0xFF800000)	/* Boot low with  8 MB Flash */
+#   define CFG_LOWBOOT		1
+#   define CFG_LOWBOOT08	1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Welcome to esd CPU CPCI/5200;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=eth0\0" \
+	"flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
+	"flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
+	"net_vxworks=phypower 1;sleep 2;tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
+	"vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
+	"ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
+	"loadaddr=01000000\0" \
+	"serverip=192.168.2.99\0" \
+	"gatewayip=10.0.0.79\0" \
+	"user=mu\0" \
+	"target=cpci5200.esd\0" \
+	"script=cpci5200.bat\0" \
+	"image=/tftpboot/vxWorks_cpci5200\0" \
+	"ipaddr=10.0.13.196\0" \
+	"netmask=255.255.0.0\0" \
+	""
+
+#define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
+
+#if defined(CONFIG_MPC5200)
+
+#define CONFIG_RTC_M48T35A	1	/* ST Electronics M48 timekeeper */
+#define CFG_NVRAM_BASE_ADDR	0xfd010000
+#define CFG_NVRAM_SIZE		32*1024
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133		/* define for 133MHz speed */
+#endif
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		1	/* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED		86000	/* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	5
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CFG_I2C_MULTI_EEPROMS		1
+/*
+ * Flash configuration
+ */
+
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant	     */
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_FLASH_SIZE		0x02000000
+#define CFG_FLASH_INCREMENT	0x01000000
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
+#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	128
+
+#define CFG_FLASH_PROTECTION	1	/* use hardware protection	     */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)  */
+
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+
+/*
+ * Environment settings
+ */
+#if 1				/* test-only */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x20000
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OVERWRITE	1
+#else
+#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
+				   /* total size of a CAT24WC32 is 8192 bytes */
+#define CONFIG_ENV_OVERWRITE	1
+#endif
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_UDP_CHECKSUM	1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x01052444
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+#else
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+#endif
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x0004DD00
+
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CFG_CS1_START		0xfd000000
+#define CFG_CS1_SIZE		0x00010000
+#define CFG_CS1_CFG		0x10101410
+
+#define CFG_CS3_START		0xfd010000
+#define CFG_CS3_SIZE		0x00010000
+#define CFG_CS3_CFG		0x10109410
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD	/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT	/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED		/* LED	 for ide not supported	*/
+
+#define	CONFIG_IDE_RESET	/* reset for ide supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers						     */
+#define CFG_ATA_STRIDE		4
+
+/*-----------------------------------------------------------------------
+ * CPLD stuff
+ */
+#define CFG_FPGA_XC95XL		1	/* using Xilinx XC95XL CPLD	 */
+#define CFG_FPGA_MAX_SIZE	32*1024	/* 32kByte is enough for CPLD	 */
+
+/* CPLD program pin configuration */
+#define CFG_FPGA_PRG		0x20000000	/* JTAG TMS pin (ppc output)	       */
+#define CFG_FPGA_CLK		0x10000000	/* JTAG TCK pin (ppc output)	       */
+#define CFG_FPGA_DATA		0x20000000	/* JTAG TDO->TDI data pin (ppc output) */
+#define CFG_FPGA_DONE		0x10000000	/* JTAG TDI->TDO pin (ppc input)       */
+
+#define JTAG_GPIO_ADDR_TMS	(CFG_MBAR + 0xB10)	/* JTAG TMS pin (GPS data out value reg.)      */
+#define JTAG_GPIO_ADDR_TCK	(CFG_MBAR + 0xC0C)	/* JTAG TCK pin (GPW data out value reg.)      */
+#define JTAG_GPIO_ADDR_TDI	(CFG_MBAR + 0xC0C)	/* JTAG TDO->TDI pin (GPW data out value reg.) */
+#define JTAG_GPIO_ADDR_TDO	(CFG_MBAR + 0xB14)	/* JTAG TDI->TDO pin (GPS data in value reg.)  */
+
+#define JTAG_GPIO_ADDR_CFG	(CFG_MBAR + 0xB00)
+#define JTAG_GPIO_CFG_SET	0x00000000
+#define JTAG_GPIO_CFG_RESET	0x00F00000
+
+#define JTAG_GPIO_ADDR_EN_TMS	(CFG_MBAR + 0xB04)
+#define JTAG_GPIO_TMS_EN_SET	0x20000000	/* Enable for GPIO */
+#define JTAG_GPIO_TMS_EN_RESET	0x00000000
+#define JTAG_GPIO_ADDR_DDR_TMS	(CFG_MBAR + 0xB0C)
+#define JTAG_GPIO_TMS_DDR_SET	0x20000000	/* Set as output   */
+#define JTAG_GPIO_TMS_DDR_RESET 0x00000000
+
+#define JTAG_GPIO_ADDR_EN_TCK	(CFG_MBAR + 0xC00)
+#define JTAG_GPIO_TCK_EN_SET	0x20000000	/* Enable for GPIO */
+#define JTAG_GPIO_TCK_EN_RESET	0x00000000
+#define JTAG_GPIO_ADDR_DDR_TCK	(CFG_MBAR + 0xC08)
+#define JTAG_GPIO_TCK_DDR_SET	0x20000000	/* Set as output   */
+#define JTAG_GPIO_TCK_DDR_RESET 0x00000000
+
+#define JTAG_GPIO_ADDR_EN_TDI	(CFG_MBAR + 0xC00)
+#define JTAG_GPIO_TDI_EN_SET	0x10000000	/* Enable as GPIO  */
+#define JTAG_GPIO_TDI_EN_RESET	0x00000000
+#define JTAG_GPIO_ADDR_DDR_TDI	(CFG_MBAR + 0xC08)
+#define JTAG_GPIO_TDI_DDR_SET	0x10000000	/* Set as output   */
+#define JTAG_GPIO_TDI_DDR_RESET 0x00000000
+
+#define JTAG_GPIO_ADDR_EN_TDO	(CFG_MBAR + 0xB04)
+#define JTAG_GPIO_TDO_EN_SET	0x10000000	/* Enable as GPIO  */
+#define JTAG_GPIO_TDO_EN_RESET	0x00000000
+#define JTAG_GPIO_ADDR_DDR_TDO	(CFG_MBAR + 0xB0C)
+#define JTAG_GPIO_TDO_DDR_SET	0x00000000
+#define JTAG_GPIO_TDO_DDR_RESET 0x10000000	/* Set as input	   */
+
+#endif				/* __CONFIG_H */