[Blackfin][PATCH] code cleanup

1 files changed, 78 insertions, 78 deletions

diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 7afc1a17fe..3e165f2495 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -9,13 +9,13 @@
 #define CONFIG_STAMP		1
 
 #define CONFIG_BOOTDELAY	5
-#define CFG_AUTOLOAD                    "no"    /*rarpb, bootp or dhcp commands will perform only a */
+#define CFG_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
 
-#define CFG_LONGHELP                    1
+#define CFG_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_LOADADDR		0x01000000      /* default load address */
+#define CONFIG_LOADADDR		0x01000000	/* default load address */
 #define CONFIG_BOOTCOMMAND	"tftp $(loadaddr) linux"
-//#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw"
+/* #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw" */
 
 #define CONFIG_DRIVER_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20310300
@@ -32,12 +32,12 @@
  * Boot Mode Set
  * Blackfin can support several boot modes
  */
-#define BF533_BYPASS_BOOT	0x0001  /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
-#define BF533_PARA_BOOT		0x0002  /* Bootmode 1: Boot from 8-bit or 16-bit flash */
-#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash		*/
+#define BF533_BYPASS_BOOT	0x0001	/* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */
+#define BF533_PARA_BOOT		0x0002	/* Bootmode 1: Boot from 8-bit or 16-bit flash */
+#define BF533_SPI_BOOT		0x0004	/* Bootmode 3: Boot from SPI flash */
 /* Define the boot mode */
 #define BFIN_BOOT_MODE		BF533_BYPASS_BOOT
-//#define BFIN_BOOT_MODE		BF533_SPI_BOOT
+/* #define BFIN_BOOT_MODE	BF533_SPI_BOOT */
 
 #define CONFIG_PANIC_HANG 1
 
@@ -53,46 +53,46 @@
 /* Define where the uboot will be loaded by on-chip boot rom */
 #define APP_ENTRY 0x00001000
 
-/* CONFIG_CLKIN_HZ is any value in Hz                            */
-#define CONFIG_CLKIN_HZ          27000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
-/*                                                  1=CLKIN/2    */
-#define CONFIG_CLKIN_HALF               0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
-/*                                               1=bypass PLL    */
-#define CONFIG_PLL_BYPASS               0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
-/* Values can range from 1-64                                    */
-#define CONFIG_VCO_MULT			22
-/* CONFIG_CCLK_DIV controls what the core clock divider is       */
-/* Values can be 1, 2, 4, or 8 ONLY                              */
-#define CONFIG_CCLK_DIV			1
+/* CONFIG_CLKIN_HZ is any value in Hz				*/
+#define CONFIG_CLKIN_HZ		27000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
+/*						    1=CLKIN/2	*/
+#define CONFIG_CLKIN_HALF	0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
+/*						 1=bypass PLL	*/
+#define CONFIG_PLL_BYPASS	0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
+/* Values can range from 1-64					*/
+#define CONFIG_VCO_MULT		22
+/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
+/* Values can be 1, 2, 4, or 8 ONLY				*/
+#define CONFIG_CCLK_DIV		1
 /* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15                                    */
-#define CONFIG_SCLK_DIV			5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider     */
-/* Values can range from 2-65535                                 */
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)                  */
-#define CONFIG_SPI_BAUD                 2
-#define CONFIG_SPI_BAUD_INITBLOCK		4
+/* Values can range from 1-15					*/
+#define CONFIG_SCLK_DIV		5
+/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
+/* Values can range from 2-65535				*/
+/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
+#define CONFIG_SPI_BAUD		2
+#define CONFIG_SPI_BAUD_INITBLOCK	4
 
 #if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ           ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
 #else
-#define CONFIG_VCO_HZ           (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
 #endif
 
 #if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
 #else
-#define CONFIG_CCLK_HZ          CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ          CONFIG_CLKIN_HZ
+#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
 #endif
 
-#define CONFIG_MEM_SIZE                 32             /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH              9             /* 8, 9, 10, 11    */
-#define CONFIG_MEM_MT48LC16M16A2TG_75    1
+#define CONFIG_MEM_SIZ		32	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH	9	/* 8, 9, 10, 11    */
+#define CONFIG_MEM_MT48LC16M16A2TG_75	1
 
 #define CONFIG_LOADS_ECHO	1
 
@@ -146,16 +146,16 @@
 #define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
 
 /* JFFS Partition offset set  */
-#define CFG_JFFS2_FIRST_BANK 0
-#define CFG_JFFS2_NUM_BANKS  1
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR                 11
+#define CFG_JFFS2_FIRST_SECTOR	11
 
 
 /*
  * Stack sizes
  */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 
 #define POLL_MODE		1
 #define FLASH_TOT_SECT		40
@@ -171,50 +171,50 @@
  * I2C settings
  * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
  */
-#define CONFIG_SOFT_I2C			1	/* I2C bit-banged		*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged */
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#define PF_SCL				PF0
-#define PF_SDA				PF1
-
-#define I2C_INIT			(*pFIO_DIR |=  PF_SCL); asm("ssync;")
-#define I2C_ACTIVE			(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE			(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ			((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
-#define I2C_SDA(bit)			if(bit) { \
-							*pFIO_FLAG_S = PF_SDA; \
-							asm("ssync;"); \
-						} \
-					else    { \
-							*pFIO_FLAG_C = PF_SDA; \
-							asm("ssync;"); \
-						}
-#define I2C_SCL(bit)			if(bit) { \
-							*pFIO_FLAG_S = PF_SCL; \
-							asm("ssync;"); \
-						} \
-					else    { \
-							*pFIO_FLAG_C = PF_SCL; \
-							asm("ssync;"); \
-						}
-#define I2C_DELAY			udelay(5)	/* 1/4 I2C clock duration */
-
-#define CFG_I2C_SPEED			50000
-#define CFG_I2C_SLAVE			0xFE
+#define PF_SCL			PF0
+#define PF_SDA			PF1
+
+#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
+#define I2C_SDA(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SDA; \
+				asm("ssync;"); \
+				} \
+			else    { \
+				*pFIO_FLAG_C = PF_SDA; \
+				asm("ssync;"); \
+				}
+#define I2C_SCL(bit)	if(bit) { \
+				*pFIO_FLAG_S = PF_SCL; \
+				asm("ssync;"); \
+				} \
+			else    { \
+				*pFIO_FLAG_C = PF_SCL; \
+				asm("ssync;"); \
+				}
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+
+#define CFG_I2C_SPEED		50000
+#define CFG_I2C_SLAVE		0xFE
 
 #define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
 /* 0xFF, 0x7BB07BB0, 0x22547BB0 */
-/* #define AMGCTLVAL            (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL              (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL |    \
-                                ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
-#define AMBCTL1VAL              (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN |   \
-                                B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
+/* #define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
+				~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
+#define AMBCTL1VAL		(B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \
+				B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
 */
-#define AMGCTLVAL               0xFF
-#define AMBCTL0VAL              0x7BB07BB0
-#define AMBCTL1VAL              0xFFC27BB0
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0x7BB07BB0
+#define AMBCTL1VAL		0xFFC27BB0
 
 #define CONFIG_VDSP		1