AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master

Rework for AT91SAM9RL-EK, makes it build again.
Based on the work for AT91SAM9260-EK.
V4: added changes to MAKEALL

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

1 files changed, 48 insertions, 37 deletions

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 8dbd0825b5..3ca09e1438 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -27,33 +27,42 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE		0x21F00000
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* main clock xtal */
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_AT91SAM9RLEK		1	/* It's an AT91SAM9RLEK Board */
 
-#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
-#define CONFIG_AT91SAM9RL	1	/* It's an Atmel AT91SAM9RL SoC*/
-#define CONFIG_AT91SAM9RLEK	1	/* on an AT91SAM9RLEK Board	*/
 #define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_AT91_GPIO		1
+#define CONFIG_AT91_GPIO_PULLUP		1
 
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO	1
-#define CONFIG_ATMEL_USART	1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_SYS
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 19200, 38400, 57600, 9600}
 
 /* LCD */
 #define CONFIG_LCD			1
@@ -62,10 +71,13 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK		1
+#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_RGB565		1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+/* Let board_init_f handle the framebuffer allocation */
+#undef CONFIG_FB_ADDR
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
 
 /* LED */
 #define CONFIG_AT91_LED
@@ -85,25 +97,29 @@
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_USB
 
-#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_NAND			1
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			0x20000000
-#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_HAS_DATAFLASH			1
 #define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define AT91_SPI_CLK			15000000
-#define DATAFLASH_TCSS			(0x1a << 16)
-#define DATAFLASH_TCHS			(0x1 << 24)
+#define AT91_SPI_CLK				15000000
+#define DATAFLASH_TCSS				(0x1a << 16)
+#define DATAFLASH_TCHS				(0x1 << 24)
 
 /* NOR flash - not present */
 #define CONFIG_SYS_NO_FLASH			1
@@ -112,7 +128,7 @@
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8			1
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
@@ -129,7 +145,7 @@
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			0x23e00000
 
 #ifdef CONFIG_SYS_USE_DATAFLASH
@@ -149,7 +165,7 @@
 #else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_IS_IN_NAND		1
 #define CONFIG_ENV_OFFSET		0x60000
 #define CONFIG_ENV_OFFSET_REDUND	0x80000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
@@ -161,25 +177,20 @@
 
 #endif
 
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-
 #define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_CMDLINE_EDITING		1
 
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
+#undef CONFIG_USE_IRQ
 
 #endif