* Patch by Rune Torgersen, 13 Feb 2003:

  Add support for Motorola MPC8266ADS board

* Patch by Kyle Harris, 19 Feb 2003:
  patches for the Intel lubbock board:
  memsetup.S - general cleanup (based on Robert's csb226 code)
  flash.c - overhaul, actually works now
  lubbock.c - fix init funcs to return proper value

* Patch by Kenneth Johansson, 26 Feb 2003:
  - Fixed off by one in RFTA calculation.
  - No need to abort when LDF is lower than we can program it's only
    minimum timing so clamp it to what we can do.
  - Takes function pointer to function for reading the spd_nvram. Usefull
    for faking data or hardcode a module without the nvram.
  - fix other user for above change
  - fix some comments.

* Patches by Brian Waite, 26 Feb 2003:
  - fix port for evb64260 board
  - fix PCI for evb64260 board
  - fix PCI scan

* Patch by Reinhard Meyer, 1 Mar 2003:
  Add support for EMK TOP860 Module

* Patch by Yuli Barcohen, 02 Mar 2003:
  Add SPD EEPROM support for MPC8260ADS board

1 files changed, 439 insertions, 0 deletions

diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
new file mode 100644
index 0000000000..f902685b32
--- /dev/null
+++ b/include/configs/TOP860.h
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * Configuation settings for the TOP860 board.
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * TOP860 is a simple module:

+ * 16-bit wide FLASH on CS0	(2MB or more)

+ * 32-bit wide DRAM on CS2 (either 4MB or 16MB)

+ * FEC with Am79C874 100-Base-T and Fiber Optic

+ * Ports available, but we choose SMC1 for Console

+ * 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set
+ * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock

+ *

+ * This config has been copied from MBX.h / MBX860T.h

+ */
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+/*-----------------------------------------------------------------------
+ * CPU and BOARD type
+ */
+#define CONFIG_MPC860	1	/* This is a MPC860 CPU		*/
+#define CONFIG_MPC860T	1	/* even better... an FEC!	*/
+#define CONFIG_TOP860	1	/* ...on a TOP860 module	*/
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define	CONFIG_IDENT_STRING " EMK TOP860"

+
+/*-----------------------------------------------------------------------
+ * CLOCK settings
+ */
+#define	CONFIG_SYSCLK	49152000

+#define	CFG_XTAL		32768

+#define	CONFIG_EBDF		1

+#define	CONFIG_COM		3

+#define	CONFIG_RTC_MPC8xx

+

+/*-----------------------------------------------------------------------
+ * Physical memory map as defined by EMK
+ */
+#define CFG_IMMR		0xFFF00000	/* Internal Memory Mapped Register */
+#define	CFG_FLASH_BASE	0x80000000	/* FLASH in final mapping */

+#define	CFG_DRAM_BASE	0x00000000	/* DRAM in final mapping */

+#define	CFG_FLASH_MAX	0x00400000	/* max FLASH to expect */

+#define	CFG_DRAM_MAX	0x01000000	/* max DRAM to expect */

+

+/*-----------------------------------------------------------------------
+ * derived values
+ */
+#define	CFG_MF			(CONFIG_SYSCLK/CFG_XTAL)

+#define	CFG_CPUCLOCK	CONFIG_SYSCLK

+#define	CFG_BRGCLOCK	CONFIG_SYSCLK

+#define	CFG_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)

+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK

+

+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+

+#define	CFG_FLASH_CFI

+
+/*-----------------------------------------------------------------------
+ * Command interpreter
+ */
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#define CONFIG_BAUDRATE		9600
+

+/*
+ * Allow partial commands to be matched to uniqueness.
+ */
+#define CFG_MATCH_PARTIAL_CMD
+
+/*
+ * List of available monitor commands.  Use the system default list
+ * plus add some of the "non-standard" commands back in.
+ * See ./cmd_confdefs.h
+ */
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+								CFG_CMD_ASKENV	| \
+								CFG_CMD_DHCP	| \
+								CFG_CMD_I2C		| \
+								CFG_CMD_EEPROM	| \
+								CFG_CMD_REGINFO	| \
+								CFG_CMD_IMMAP	| \
+								CFG_CMD_ELF		| \
+								CFG_CMD_DATE	| \
+								CFG_CMD_MII 	| \
+								CFG_CMD_BEDBUG	\
+						      )
+
+#define	CONFIG_AUTOSCRIPT		1

+#define	CFG_LOADS_BAUD_CHANGE	1

+#undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+

+#undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot	*/
+

+#ifdef	CFG_HUSH_PARSER
+ #define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+

+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+ #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+

+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+/*-----------------------------------------------------------------------
+ * Memory Test Command
+ */
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+

+/*-----------------------------------------------------------------------
+ * Environment handler
+ * only the first 6k in EEPROM are available for user. Of that we use 256b
+ */
+#define	CONFIG_SOFT_I2C

+#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CFG_ENV_OFFSET		0x1000
+#define CFG_ENV_SIZE		0x0700

+#define CFG_I2C_EEPROM_ADDR 0x57

+#define CFG_FACT_OFFSET		0x1800
+#define CFG_FACT_SIZE		0x0800

+#define CFG_I2C_FACT_ADDR	0x57

+#define CFG_EEPROM_PAGE_WRITE_BITS 3

+#define CFG_I2C_EEPROM_ADDR_LEN 2

+#define CFG_EEPROM_SIZE 0x2000
+#define	CFG_I2C_SPEED	100000
+#define	CFG_I2C_SLAVE	0xFE

+#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS 12

+#define CONFIG_ENV_OVERWRITE

+#define CONFIG_MISC_INIT_R

+

+#if defined (CONFIG_SOFT_I2C)

+#define	SDA	0x00010

+#define	SCL	0x00020

+#define DIR immr->im_cpm.cp_pbdir

+#define DAT	immr->im_cpm.cp_pbdat

+#define PAR	immr->im_cpm.cp_pbpar

+#define	ODR	immr->im_cpm.cp_pbodr

+#define	I2C_INIT	{PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}

+#define	I2C_READ	((DAT&SDA)?1:0)

+#define	I2C_SDA(x)	{if(x)DAT|=SDA;else DAT&=~SDA;}

+#define	I2C_SCL(x)	{if(x)DAT|=SCL;else DAT&=~SCL;}

+#define	I2C_DELAY	{udelay(5);}

+#define	I2C_ACTIVE	 {DIR|=SDA;}

+#define	I2C_TRISTATE {DIR&=~SDA;}

+#endif
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*-----------------------------------------------------------------------
+ * defines we need to get FEC running
+ */

+#define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
+#define CONFIG_FEC_ENET 	1	/* Ethernet only via FEC	*/
+#define	FEC_ENET			1	/* eth.c needs it that way... */

+#define CFG_DISCOVER_PHY	1
+#define CONFIG_MII			1
+#define CONFIG_PHY_ADDR		31
+

+/*-----------------------------------------------------------------------
+ * adresses
+ */

+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+

+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x80000000
+

+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
+#define CFG_INIT_VPD_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
+#define CFG_INIT_SP_OFFSET	(CFG_INIT_VPD_OFFSET-8)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/*-----------------------------------------------------------------------
+ * Debug Enable Register
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0					/* used in start.S */
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * set up PLPRCR (PLL, Low-Power, and Reset Control Register)

+ *	12	MF		calculated	Multiplication factor

+ *	4	0		0000

+ *	1	SPLSS	0			System PLL lock status sticky

+ *	1	TEXPS	1			Timer expired status

+ *	1	0		0

+ *	1	TMIST	0			Timers interrupt status

+ *	1	0		0

+ *	1	CSRC	0			Clock source (0=DFNH, 1=DFNL)

+ *	2	LPM		00			Low-power modes

+ *	1	CSR		0			Checkstop reset enable

+ *	1	LOLRE	0			Loss-of-lock reset enable

+ *	1	FIOPD	0			Force I/O pull down

+ *	5	0		00000			

+ */
+#define CFG_PLPRCR	(PLPRCR_TEXPS | ((CFG_MF-1)<<20))
+

+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * set up SYPCR:

+ *	16	SWTC	0xffff		Software watchdog timer count

+ *	8	BMT		0xff 		Bus monitor timing

+ *	1	BME		1			Bus monitor enable

+ *	3	0		000

+ *	1	SWF		1			Software watchdog freeze

+ *	1	SWE		0/1			Software watchdog enable

+ *	1	SWRI	0/1			Software watchdog reset/interrupt select (1=HRESET)

+ *	1	SWP		0/1			Software watchdog prescale (1=/2048)

+ */
+#if defined (CONFIG_WATCHDOG)
+ #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 		 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+ #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * set up SIUMCR

+ *	1	EARB	0			External arbitration

+ *	3	EARP	000			External arbitration request priority

+ *	4	0		0000

+ *	1	DSHW	0			Data show cycles

+ *	2	DBGC	00			Debug pin configuration

+ *	2	DBPC	00			Debug port pins configuration

+ *	1	0		0

+ *	1	FRC		0			FRZ pin configuration

+ *	1	DLK		0			Debug register lock

+ *	1	OPAR	0			Odd parity

+ *	1	PNCS	0			Parity enable for non memory controller regions

+ *	1	DPC		0			Data parity pins configuration

+ *	1	MPRE	0			Multiprocessor reservation enable

+ *	2	MLRC	11			Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)

+ *	1	AEME	0			Async external master enable

+ *	1	SEME	0			Sync external master enable

+ *	1	BSC		0			Byte strobe configuration

+ *	1	GB5E	0			GPL_B5 enable

+ *	1	B2DD	0			Bank 2 double drive			

+ *	1	B3DD	0			Bank 3 double drive			

+ *	4	0		0000

+ */
+#define CFG_SIUMCR	(SIUMCR_MLRC11)
+

+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * set up SCCR (System Clock and Reset Control Register)

+ *	1	0		0

+ *	2	COM		11			Clock output module (00=full, 01=half, 11=off)

+ *	3	0		000

+ *	1	TBS		1			Timebase source (0=OSCCLK, 1=GCLK2)

+ *	1	RTDIV	0			Real-time clock divide (0=/4, 1=/512)

+ *	1	RTSEL	0			Real-time clock select (0=OSCM, 1=EXTCLK)

+ *	1	CRQEN	0			CPM request enable

+ *	1	PRQEN	0			Power management request enable

+ *	2	0		00

+ *	2	EBDF	xx			External bus division factor

+ *	2	0		00

+ *	2	DFSYNC	00			Division factor for SYNCLK

+ *	2	DFBRG	00			Division factor for BRGCLK

+ *	3	DFNL	000			Division factor low frequency

+ *	3	DFNH	000			Division factor high frequency

+ *	5	0		00000

+ */
+#define SCCR_MASK	0
+#if CONFIG_EBDF

+ #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
+#else

+ #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS)
+#endif

+
+/*-----------------------------------------------------------------------
+ * Chip Select 0 - FLASH
+ *-----------------------------------------------------------------------
+ * Preliminary Values
+ */
+/* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
+#define CFG_OR0_PRELIM	(-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | BR_PS_16 | BR_V )
+

+/*-----------------------------------------------------------------------
+ * misc
+ *-----------------------------------------------------------------------
+ *
+ */
+/*
+ * Set the autoboot delay in seconds.  A delay of -1 disables autoboot
+ */
+#define CONFIG_BOOTDELAY				5
+
+/*
+ * Pass the clock frequency to the Linux kernel in units of MHz
+ */
+#define	CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_PREBOOT		\
+	"echo;echo"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND	\
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+	"bootm"
+
+/*
+ * BOOTP options
+ */
+#undef	CONFIG_BOOTP_MASK

+#define CONFIG_BOOTP_MASK				( CONFIG_BOOTP_DEFAULT		| \
+									  	  CONFIG_BOOTP_BOOTFILESIZE   \
+										)

+										

+
+/*
+ * Set default IP stuff just to get bootstrap entries into the
+ * environment so that we can autoscript the full default environment.
+ */
+#define CONFIG_ETHADDR					9a:52:63:15:85:25
+#define CONFIG_SERVERIP					10.0.4.200
+#define CONFIG_IPADDR					10.0.4.111
+

+/*-----------------------------------------------------------------------
+ * Defaults for Autoscript
+ */
+#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define	CFG_TFTP_LOADADDR	0x00100000
+

+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+

+#endif	/* __CONFIG_H */