* Patch by Scott McNutt, 21 Oct 2004:

  Add support for Nios-II EPCS Controller core.

* Patch by Scott McNutt, 20 Oct 2004:
  Nios-II cleanups:
  - Add sysid command (Nios-II only).
  - Locate default exception trampoline at proper offset.
  - Implement I/O routines (readb, writeb, etc)
  - Implement do_bootm_linux

1 files changed, 42 insertions, 1 deletions

diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 865c69b5b7..91e95186a2 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -52,7 +52,7 @@
 #define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
 #define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
 #define CFG_SRAM_BASE		0x00800000	/* SRAM base addr	*/
-#define CFG_SRAM_SIZE		0x00200000	/* 2 MByte		*/
+#define CFG_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION
@@ -107,6 +107,14 @@
 #define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
 
 /*------------------------------------------------------------------------
+ * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for
+ * epcs device access is enabled. The base address is the epcs
+ * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
+ * The register base is currently at offset 0x400 from the memory base.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_EPCSBASE	0x00900400	/* EPCS register base	*/
+
+/*------------------------------------------------------------------------
  * DEBUG
  *----------------------------------------------------------------------*/
 #undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
@@ -173,6 +181,36 @@
 #include <cmd_confdefs.h>
 
 /*------------------------------------------------------------------------
+ * COMPACT FLASH
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#define CONFIG_IDE_PREINIT			/* Implement id_preinit	*/
+#define CFG_IDE_MAXBUS		1		/* 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
+
+#define CFG_ATA_BASE_ADDR	0x00900800	/* ATA base addr	*/
+#define CFG_ATA_IDE0_OFFSET	0x0000		/* IDE0 offset		*/
+#define CFG_ATA_DATA_OFFSET	0x0040		/* Data IO offset	*/
+#define CFG_ATA_REG_OFFSET	0x0040		/* Register offset	*/
+#define CFG_ATA_ALT_OFFSET	0x0100		/* Alternate reg offset	*/
+#define CFG_ATA_STRIDE          4		/* Width betwix addrs	*/
+#define CONFIG_DOS_PARTITION
+
+/* Board-specific cf regs */
+#define CFG_CF_PRESENT		0x00900880	/* CF Present PIO base	*/
+#define CFG_CF_POWER		0x00900890	/* CF Power FET PIO base*/
+#define CFG_CF_ATASEL		0x009008a0	/* CF ATASEL PIO base	*/
+
+#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+
+/*------------------------------------------------------------------------
+ * JFFS2
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#define CFG_JFFS_CUSTOM_PART			/* board defined part	*/
+#endif
+
+/*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP				/* Provide extended help*/
@@ -185,4 +223,7 @@
 #define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
 #define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
 
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+
 #endif	/* __CONFIG_H */