diff options
| author | Timur Tabi <timur@freescale.com> | 2008-02-08 13:15:55 -0600 |
|---|---|---|
| committer | Kim Phillips <kim.phillips@freescale.com> | 2008-03-25 19:16:43 -0500 |
| commit | 89c7784ed90ba50301eec521144f95111e472906 (patch) | |
| tree | 6e2ed88c42e80fbc454de5de9337d53c1cfc9ad1 /include/configs/MPC8313ERDB.h | |
| parent | b55d98c6d5b8694e560a0e727b14cb6921d7cfcc (diff) | |
| download | blackbird-obmc-uboot-89c7784ed90ba50301eec521144f95111e472906.tar.gz blackbird-obmc-uboot-89c7784ed90ba50301eec521144f95111e472906.zip | |
83xx: Add Vitesse VSC7385 firmware uploading
Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
Cleaned up the board header files to make selecting the VSC7385 easier to
control.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Diffstat (limited to 'include/configs/MPC8313ERDB.h')
| -rw-r--r-- | include/configs/MPC8313ERDB.h | 88 |
1 files changed, 59 insertions, 29 deletions
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index f12a3e605e..9576fa59e2 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -38,6 +38,14 @@ #define CONFIG_PCI #define CONFIG_83XX_GENERIC_PCI +#define CONFIG_MISC_INIT_R + +/* + * On-board devices + */ +#define CONFIG_VSC7385_ENET + + #ifdef CFG_66MHZ #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ #elif defined(CFG_33MHZ) @@ -65,6 +73,22 @@ #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ /* + * Device configurations + */ + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + +#define CONFIG_TSEC2 + +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFE7FE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 + +#endif + +/* * DDR Setup */ #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ @@ -214,19 +238,24 @@ #define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE #define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ +/* local bus read write buffer mapping */ +#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ +#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ +#define CFG_LBLAWBAR3_PRELIM 0xFA000000 +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* Vitesse 7385 */ + #define CFG_VSC7385_BASE 0xF0000000 -#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#ifdef CONFIG_VSC7385_ENET + #define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ #define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ #define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */ #define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */ -/* local bus read write buffer mapping */ -#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ -#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ -#define CFG_LBLAWBAR3_PRELIM 0xFA000000 -#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ +#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -263,13 +292,6 @@ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 -/* TSEC */ -#define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) -#define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) -#define CONFIG_NET_MULTI - /* * General PCI * Addresses are mapped 1-1. @@ -288,26 +310,31 @@ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ /* - * TSEC configuration + * TSEC */ #define CONFIG_TSEC_ENET /* TSEC ethernet support */ -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif - -#define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 +#define CONFIG_NET_MULTI +#define CONFIG_GMII /* MII PHY management */ +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 +#define CFG_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_TSEC2 +#define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0x1c -#define TSEC2_PHY_ADDR 4 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 +#define CFG_TSEC2_OFFSET 0x25000 +#define TSEC2_PHY_ADDR 4 +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC2_PHYIDX 0 +#endif + /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC1" @@ -496,10 +523,13 @@ */ #define CONFIG_ENV_OVERWRITE +#ifdef CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:95:01 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH0 +#endif + +#ifdef CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 +#endif #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 |
