miiphy: convert to linux/mii.h

The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

18 files changed, 179 insertions, 200 deletions

diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 45ff4f333b..b1763b18bb 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -1185,16 +1185,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	}
 #endif /* defined(CONFIG_PHY_RESET) */
 
-	miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
+	miiphy_read (dev->name, reg, MII_BMSR, &reg_short);
 
 	/*
 	 * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
 	 */
-	if ((reg_short & PHY_BMSR_AUTN_ABLE)
-	    && !(reg_short & PHY_BMSR_AUTN_COMP)) {
+	if ((reg_short & BMSR_ANEGCAPABLE)
+	    && !(reg_short & BMSR_ANEGCOMPLETE)) {
 		puts ("Waiting for PHY auto negotiation to complete");
 		i = 0;
-		while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
+		while (!(reg_short & BMSR_ANEGCOMPLETE)) {
 			/*
 			 * Timeout reached ?
 			 */
@@ -1207,7 +1207,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 				putc ('.');
 			}
 			udelay (1000);	/* 1 ms */
-			miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
+			miiphy_read (dev->name, reg, MII_BMSR, &reg_short);
 		}
 		puts (" done\n");
 		udelay (500000);	/* another 500 ms (results in faster booting) */
diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c
index d45aab1306..54a944bfc4 100644
--- a/drivers/net/altera_tse.c
+++ b/drivers/net/altera_tse.c
@@ -475,12 +475,12 @@ static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
 	 */
 	mii_reg = tse_mdio_read(priv, MIIM_STATUS);
 
-	if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE)
-	    && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+	if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE)
+	    && !(mii_reg & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
 
 		puts("Waiting for PHY auto negotiation to complete");
-		while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
+		while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
 			/*
 			 * Timeout reached ?
 			 */
@@ -643,13 +643,13 @@ static struct phy_info phy_info_generic = {
 	"Unknown/Generic PHY",
 	32,
 	(struct phy_cmd[]){	/* config */
-			   {PHY_BMCR, PHY_BMCR_RESET, NULL},
-			   {PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL},
+			   {MII_BMCR, BMCR_RESET, NULL},
+			   {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL},
 			   {miim_end,}
 			   },
 	(struct phy_cmd[]){	/* startup */
-			   {PHY_BMSR, miim_read, NULL},
-			   {PHY_BMSR, miim_read, &mii_parse_sr},
+			   {MII_BMSR, miim_read, NULL},
+			   {MII_BMSR, miim_read, &mii_parse_sr},
 			   {miim_end,}
 			   },
 	(struct phy_cmd[]){	/* shutdown */
diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h
index c1cb79e88a..8880bfc0f8 100644
--- a/drivers/net/altera_tse.h
+++ b/drivers/net/altera_tse.h
@@ -41,8 +41,6 @@
 #define MIIM_STATUS		0x1
 #define MIIM_STATUS_AN_DONE	0x00000020
 #define MIIM_STATUS_LINK	0x0004
-#define PHY_BMSR_AUTN_ABLE	0x0008
-#define PHY_BMSR_AUTN_COMP	0x0020
 
 #define MIIM_PHYIR1		0x2
 #define MIIM_PHYIR2		0x3
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 43a3d79dc5..56cd2aaf49 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -236,7 +236,7 @@ static int gen_is_phy_connected(int phy_addr)
 {
 	u_int16_t	dummy;
 
-	return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+	return(davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy));
 }
 
 static int gen_get_link_speed(int phy_addr)
@@ -280,19 +280,19 @@ static int gen_auto_negotiate(int phy_addr)
 {
 	u_int16_t	tmp;
 
-	if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
 		return(0);
 
 	/* Restart Auto_negotiation  */
-	tmp |= PHY_BMCR_AUTON;
-	davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+	tmp |= BMCR_ANENABLE;
+	davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
 
 	/*check AutoNegotiate complete */
 	udelay (10000);
-	if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
 		return(0);
 
-	if (!(tmp & PHY_BMSR_AUTN_COMP))
+	if (!(tmp & BMSR_ANEGCOMPLETE))
 		return(0);
 
 	return(gen_get_link_speed(phy_addr));
@@ -694,14 +694,14 @@ int davinci_emac_initialize(void)
 		return(0);
 
 	/* Get PHY ID and initialize phy_ops for a detected PHY */
-	if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+	if (!davinci_eth_phy_read(active_phy_addr, MII_PHYSID1, &tmp)) {
 		active_phy_addr = 0xff;
 		return(0);
 	}
 
 	phy_id = (tmp << 16) & 0xffff0000;
 
-	if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+	if (!davinci_eth_phy_read(active_phy_addr, MII_PHYSID2, &tmp)) {
 		active_phy_addr = 0xff;
 		return(0);
 	}
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 2f923f26f9..3f5eeb73c5 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -318,19 +318,19 @@ static int find_phy(struct eth_device *dev)
 	u16 ctrl, oldctrl;
 
 	do {
-		eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
-		oldctrl = ctrl & PHY_BMCR_AUTON;
+		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+		oldctrl = ctrl & BMCR_ANENABLE;
 
-		ctrl ^= PHY_BMCR_AUTON;
-		eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
-		eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
-		ctrl &= PHY_BMCR_AUTON;
+		ctrl ^= BMCR_ANENABLE;
+		eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
+		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+		ctrl &= BMCR_ANENABLE;
 
 		if (ctrl == oldctrl) {
 			phy_addr++;
 		} else {
-			ctrl ^= PHY_BMCR_AUTON;
-			eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+			ctrl ^= BMCR_ANENABLE;
+			eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
 
 			return phy_addr;
 		}
@@ -347,10 +347,10 @@ static int dw_reset_phy(struct eth_device *dev)
 	int timeout = CONFIG_PHYRESET_TIMEOUT;
 	u32 phy_addr = priv->address;
 
-	eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+	eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
 	do {
-		eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
-		if (!(ctrl & PHY_BMCR_RESET))
+		eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+		if (!(ctrl & BMCR_RESET))
 			break;
 		udelay(1000);
 	} while (timeout--);
@@ -386,33 +386,33 @@ static int configure_phy(struct eth_device *dev)
 		return -1;
 
 #if defined(CONFIG_DW_AUTONEG)
-	bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
-	       PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
+	bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
+	       BMCR_FULLDPLX | BMCR_SPEED1000;
 #else
-	bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
+	bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
 
 #if defined(CONFIG_DW_SPEED10M)
-	bmcr &= ~PHY_BMCR_100MB;
+	bmcr &= ~BMCR_SPEED100;
 #endif
 #if defined(CONFIG_DW_DUPLEXHALF)
-	bmcr &= ~PHY_BMCR_DPLX;
+	bmcr &= ~BMCR_FULLDPLX;
 #endif
 #endif
-	if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
+	if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
 		return -1;
 
 	/* Read the phy status register and populate priv structure */
 #if defined(CONFIG_DW_AUTONEG)
 	timeout = CONFIG_AUTONEG_TIMEOUT;
 	do {
-		eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
-		if (bmsr & PHY_BMSR_AUTN_COMP)
+		eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
+		if (bmsr & BMSR_ANEGCOMPLETE)
 			break;
 		udelay(1000);
 	} while (timeout--);
 
-	eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
-	eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
+	eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
+	eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
 
 	if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
 		priv->speed = SPEED_1000M;
@@ -421,28 +421,28 @@ static int configure_phy(struct eth_device *dev)
 		else
 			priv->duplex = HALF_DUPLEX;
 	} else {
-		if (anlpar & PHY_ANLPAR_100)
+		if (anlpar & LPA_100)
 			priv->speed = SPEED_100M;
 		else
 			priv->speed = SPEED_10M;
 
-		if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+		if (anlpar & (LPA_10FULL | LPA_100FULL))
 			priv->duplex = FULL_DUPLEX;
 		else
 			priv->duplex = HALF_DUPLEX;
 	}
 #else
-	if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
+	if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
 		return -1;
 
-	if (ctrl & PHY_BMCR_DPLX)
+	if (ctrl & BMCR_FULLDPLX)
 		priv->duplex = FULL_DUPLEX;
 	else
 		priv->duplex = HALF_DUPLEX;
 
-	if (ctrl & PHY_BMCR_1000_MBPS)
+	if (ctrl & BMCR_SPEED1000)
 		priv->speed = SPEED_1000M;
-	else if (ctrl & PHY_BMCR_100_MBPS)
+	else if (ctrl & BMCR_SPEED100)
 		priv->speed = SPEED_100M;
 	else
 		priv->speed = SPEED_10M;
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index ae0e0d4582..86709a7f0a 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -335,7 +335,7 @@ static struct eth_device* verify_phyaddr (const char *devname,
 	}
 
 	/* read id2 register */
-	if (get_phyreg(dev, addr, PHY_PHYIDR2, &value) != 0) {
+	if (get_phyreg(dev, addr, MII_PHYSID2, &value) != 0) {
 		printf("%s: mii read timeout!\n", devname);
 		return NULL;
 	}
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 0d0f392d1e..c4389629a9 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -163,20 +163,20 @@ static int miiphy_restart_aneg(struct eth_device *dev)
 	 * Reset PHY, then delay 300ns
 	 */
 #ifdef CONFIG_MX27
-	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_MIPGSR, 0x00FF);
+	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_DCOUNTER, 0x00FF);
 #endif
-	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
-			PHY_BMCR_RESET);
+	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_BMCR,
+			BMCR_RESET);
 	udelay(1000);
 
 	/*
 	 * Set the auto-negotiation advertisement register bits
 	 */
-	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR,
-			PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
-			PHY_ANLPAR_10 | PHY_ANLPAR_PSB_802_3);
-	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_ADVERTISE,
+			LPA_100FULL | LPA_100HALF | LPA_10FULL |
+			LPA_10HALF | PHY_ANLPAR_PSB_802_3);
+	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_BMCR,
+			BMCR_ANENABLE | BMCR_ANRESTART);
 
 	return 0;
 }
@@ -197,12 +197,12 @@ static int miiphy_wait_aneg(struct eth_device *dev)
 		}
 
 		if (miiphy_read(dev->name, CONFIG_FEC_MXC_PHYADDR,
-					PHY_BMSR, &status)) {
+					MII_BMSR, &status)) {
 			printf("%s: Autonegotiation failed. status: 0x%04x\n",
 					dev->name, status);
 			return -1;
 		}
-	} while (!(status & PHY_BMSR_LS));
+	} while (!(status & BMSR_LSTATUS));
 
 	return 0;
 }
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
index 35a6dfbe94..5330dbc79f 100644
--- a/drivers/net/fsl_mcdmafec.c
+++ b/drivers/net/fsl_mcdmafec.c
@@ -200,7 +200,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	cbd_t *pTbd, *pUsedTbd;
 	u16 phyStatus;
 
-	miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
+	miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
 
 	/* process all the consumed TBDs */
 	while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
index 492f5ce8f8..bd3360cad7 100644
--- a/drivers/net/inca-ip_sw.c
+++ b/drivers/net/inca-ip_sw.c
@@ -756,7 +756,7 @@ static int inca_amdix(void)
 					(0x1 << 31) |	/* RA		*/
 					(0x0 << 30) |	/* Read		*/
 					(0x6 << 21) |	/* LAN		*/
-					(6   << 16));	/* PHY_ANER	*/
+					(6   << 16));	/* MII_EXPANSION	*/
 				do {
 					SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
 				} while (phyReg6 & (1 << 31));
@@ -769,7 +769,7 @@ static int inca_amdix(void)
 						(0x1 << 31) |	/* RA		*/
 						(0x0 << 30) |	/* Read		*/
 						(0x6 << 21) |	/* LAN		*/
-						(4   << 16));	/* PHY_ANAR	*/
+						(4   << 16));	/* MII_ADVERTISE	*/
 					do {
 						SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
 					} while (phyReg4 & (1 << 31));
@@ -782,7 +782,7 @@ static int inca_amdix(void)
 							(0x1 << 31) |	/* RA		*/
 							(0x0 << 30) |	/* Read		*/
 							(0x6 << 21) |	/* LAN		*/
-							(5   << 16));	/* PHY_ANLPAR	*/
+							(5   << 16));	/* MII_LPA	*/
 						do {
 							SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
 						} while (phyReg5 & (1 << 31));
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index 64be5de52f..a08ff278bf 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -141,7 +141,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	int j, rc;
 	u16 phyStatus;
 
-	miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
+	miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
 
 	/* section 16.9.23.3
 	 * Wait for ready
diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c
index 401182d426..f959c00ca7 100644
--- a/drivers/net/mcfmii.c
+++ b/drivers/net/mcfmii.c
@@ -171,7 +171,7 @@ int mii_discover_phy(struct eth_device *dev)
 
 		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
 
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+			phytype = mii_send(mk_mii_read(phyno, MII_PHYSID1));
 #ifdef ET_DEBUG
 			printf("PHY type 0x%x pass %d type\n", phytype, pass);
 #endif
@@ -180,7 +180,7 @@ int mii_discover_phy(struct eth_device *dev)
 			phyaddr = phyno;
 			phytype <<= 16;
 			phytype |=
-			    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+			    mii_send(mk_mii_read(phyno, MII_PHYSID2));
 
 #ifdef ET_DEBUG
 			printf("PHY @ 0x%x pass %d\n", phyno, pass);
@@ -256,18 +256,18 @@ void __mii_init(void)
 		status = 0;
 		i++;
 		/* Read PHY control register */
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &status);
+		miiphy_read(dev->name, info->phy_addr, MII_BMCR, &status);
 
 		/* If phy set to autonegotiate, wait for autonegotiation done,
 		 * if phy is not autonegotiating, just wait for link up.
 		 */
-		if ((status & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
-			linkgood = (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS);
+		if ((status & BMCR_ANENABLE) == BMCR_ANENABLE) {
+			linkgood = (BMSR_ANEGCOMPLETE | BMSR_LSTATUS);
 		} else {
-			linkgood = PHY_BMSR_LS;
+			linkgood = BMSR_LSTATUS;
 		}
 		/* Read PHY status register */
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &status);
+		miiphy_read(dev->name, info->phy_addr, MII_BMSR, &status);
 		if ((status & linkgood) == linkgood)
 			break;
 
diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c
index bfa651b7bf..de82b0487a 100644
--- a/drivers/net/ns7520_eth.c
+++ b/drivers/net/ns7520_eth.c
@@ -387,8 +387,8 @@ static int ns7520_eth_reset(void)
 	    ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
 
 	/* reset PHY */
-	ns7520_mii_write(PHY_BMCR, PHY_BMCR_RESET);
-	ns7520_mii_write(PHY_BMCR, 0);
+	ns7520_mii_write(MII_BMCR, BMCR_RESET);
+	ns7520_mii_write(MII_BMCR, 0);
 
 	udelay(3000);		/* [2] p.70 says at least 300us reset recovery time. */
 
@@ -438,23 +438,23 @@ static void ns7520_link_auto_negotiate(void)
 
 	/* run auto-negotation */
 	/* define what we are capable of */
-	ns7520_mii_write(PHY_ANAR,
-			 PHY_ANLPAR_TXFD |
-			 PHY_ANLPAR_TX |
-			 PHY_ANLPAR_10FD |
-			 PHY_ANLPAR_10 |
+	ns7520_mii_write(MII_ADVERTISE,
+			 LPA_100FULL |
+			 LPA_100HALF |
+			 LPA_10FULL |
+			 LPA_10HALF |
 			 PHY_ANLPAR_PSB_802_3);
 	/* start auto-negotiation */
-	ns7520_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	ns7520_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
 
 	/* wait for completion */
 
 	ulStartJiffies = get_timer(0);
 	while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) {
-		uiStatus = ns7520_mii_read(PHY_BMSR);
+		uiStatus = ns7520_mii_read(MII_BMSR);
 		if ((uiStatus &
-		     (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
-		    (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
+		     (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) ==
+		    (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
 			/* lucky we are, auto-negotiation succeeded */
 			ns7520_link_print_changed();
 			ns7520_link_update_egcr();
@@ -515,13 +515,13 @@ static void ns7520_link_print_changed(void)
 
 	DEBUG_FN(DEBUG_LINK);
 
-	uiControl = ns7520_mii_read(PHY_BMCR);
+	uiControl = ns7520_mii_read(MII_BMCR);
 
-	if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
-		/* PHY_BMSR_LS is only set on autonegotiation */
-		uiStatus = ns7520_mii_read(PHY_BMSR);
+	if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) {
+		/* BMSR_LSTATUS is only set on autonegotiation */
+		uiStatus = ns7520_mii_read(MII_BMSR);
 
-		if (!(uiStatus & PHY_BMSR_LS)) {
+		if (!(uiStatus & BMSR_LSTATUS)) {
 			printk(KERN_WARNING NS7520_DRIVER_NAME
 			       ": link down\n");
 			/* @TODO Linux: carrier_off */
@@ -582,12 +582,12 @@ static char ns7520_mii_identify_phy(void)
 
 	DEBUG_FN(DEBUG_MII);
 
-	phyDetected = (PhyType) uiID1 = ns7520_mii_read(PHY_PHYIDR1);
+	phyDetected = (PhyType) uiID1 = ns7520_mii_read(MII_PHYSID1);
 
 	switch (phyDetected) {
 	case PHY_LXT971A:
 		szName = "LXT971A";
-		uiID2 = ns7520_mii_read(PHY_PHYIDR2);
+		uiID2 = ns7520_mii_read(MII_PHYSID2);
 		nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
 		cRes = 1;
 		break;
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
index d4901b4118..9899563c47 100644
--- a/drivers/net/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
@@ -399,8 +399,8 @@ static int ns9750_eth_reset (void)
 		ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
 
 	/* reset PHY */
-	ns9750_mii_write(PHY_BMCR, PHY_BMCR_RESET);
-	ns9750_mii_write(PHY_BMCR, 0);
+	ns9750_mii_write(MII_BMCR, BMCR_RESET);
+	ns9750_mii_write(MII_BMCR, 0);
 
 	/* @TODO check time */
 	udelay (3000);		/* [2] p.70 says at least 300us reset recovery time. But
@@ -455,26 +455,25 @@ static void ns9750_link_force (void)
 
 	DEBUG_FN (DEBUG_LINK);
 
-	uiControl = ns9750_mii_read(PHY_BMCR);
-	uiControl &= ~(PHY_BMCR_SPEED_MASK |
-		       PHY_BMCR_AUTON | PHY_BMCR_DPLX);
+	uiControl = ns9750_mii_read(MII_BMCR);
+	uiControl &= ~(BMCR_SPEED1000 | BMCR_SPEED100 |
+		       BMCR_ANENABLE | BMCR_FULLDPLX);
 
 	uiLastLinkStatus = 0;
 
 	if ((ucLinkMode & FS_EEPROM_AUTONEG_SPEED_MASK) ==
 	    FS_EEPROM_AUTONEG_SPEED_100) {
-		uiControl |= PHY_BMCR_100MB;
+		uiControl |= BMCR_SPEED100;
 		uiLastLinkStatus |= PHY_LXT971_STAT2_100BTX;
-	} else
-		uiControl |= PHY_BMCR_10_MBPS;
+	}
 
 	if ((ucLinkMode & FS_EEPROM_AUTONEG_DUPLEX_MASK) ==
 	    FS_EEPROM_AUTONEG_DUPLEX_FULL) {
-		uiControl |= PHY_BMCR_DPLX;
+		uiControl |= BMCR_FULLDPLX;
 		uiLastLinkStatus |= PHY_LXT971_STAT2_DUPLEX_MODE;
 	}
 
-	ns9750_mii_write(PHY_BMCR, uiControl);
+	ns9750_mii_write(MII_BMCR, uiControl);
 
 	ns9750_link_print_changed ();
 	ns9750_link_update_egcr ();
@@ -495,23 +494,23 @@ static void ns9750_link_auto_negotiate (void)
 
 	/* run auto-negotation */
 	/* define what we are capable of */
-	ns9750_mii_write(PHY_ANAR,
-			 PHY_ANLPAR_TXFD |
-			 PHY_ANLPAR_TX |
-			 PHY_ANLPAR_10FD |
-			 PHY_ANLPAR_10 |
+	ns9750_mii_write(MII_ADVERTISE,
+			 LPA_100FULL |
+			 LPA_100HALF |
+			 LPA_10FULL |
+			 LPA_10HALF |
 			 PHY_ANLPAR_PSB_802_3);
 	/* start auto-negotiation */
-	ns9750_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	ns9750_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
 
 	/* wait for completion */
 
 	ulStartJiffies = get_ticks ();
 	while (get_ticks () < ulStartJiffies + NS9750_MII_NEG_DELAY) {
-		uiStatus = ns9750_mii_read(PHY_BMSR);
+		uiStatus = ns9750_mii_read(MII_BMSR);
 		if ((uiStatus &
-		     (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
-		    (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
+		     (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) ==
+		    (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
 			/* lucky we are, auto-negotiation succeeded */
 			ns9750_link_print_changed ();
 			ns9750_link_update_egcr ();
@@ -569,13 +568,13 @@ static void ns9750_link_print_changed (void)
 
 	DEBUG_FN (DEBUG_LINK);
 
-	uiControl = ns9750_mii_read(PHY_BMCR);
+	uiControl = ns9750_mii_read(MII_BMCR);
 
-	if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
-		/* PHY_BMSR_LS is only set on autonegotiation */
-		uiStatus = ns9750_mii_read(PHY_BMSR);
+	if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) {
+		/* BMSR_LSTATUS is only set on autonegotiation */
+		uiStatus = ns9750_mii_read(MII_BMSR);
 
-		if (!(uiStatus & PHY_BMSR_LS)) {
+		if (!(uiStatus & BMSR_LSTATUS)) {
 			printk (KERN_WARNING NS9750_DRIVER_NAME
 				": link down\n");
 			/* @TODO Linux: carrier_off */
@@ -634,12 +633,12 @@ static char ns9750_mii_identify_phy (void)
 
 	DEBUG_FN (DEBUG_MII);
 
-	phyDetected = (PhyType) uiID1 = ns9750_mii_read(PHY_PHYIDR1);
+	phyDetected = (PhyType) uiID1 = ns9750_mii_read(MII_PHYSID1);
 
 	switch (phyDetected) {
 	case PHY_LXT971A:
 		szName = "LXT971A";
-		uiID2 = ns9750_mii_read(PHY_PHYIDR2);
+		uiID2 = ns9750_mii_read(MII_PHYSID2);
 		nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
 		cRes = 1;
 		break;
diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 2d1de02917..483a920fca 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -354,7 +354,7 @@ int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig)
 		printf("Invalid cpu port config, using default port5\n");
 	}
 
-	RD_PHY(name, MV88E61XX_PRT_OFST, PHY_PHYIDR2, &reg);
+	RD_PHY(name, MV88E61XX_PRT_OFST, MII_PHYSID2, &reg);
 	switch (reg &= 0xfff0) {
 	case 0x1610:
 		idstr = "88E6161";
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 3da4c35fc2..aeafeba44c 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -103,11 +103,11 @@ static void smc911x_phy_configure(struct eth_device *dev)
 
 	smc911x_phy_reset(dev);
 
-	smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_RESET);
+	smc911x_miiphy_write(dev, 1, MII_BMCR, BMCR_RESET);
 	mdelay(1);
-	smc911x_miiphy_write(dev, 1, PHY_ANAR, 0x01e1);
-	smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_AUTON |
-				PHY_BMCR_RST_NEG);
+	smc911x_miiphy_write(dev, 1, MII_ADVERTISE, 0x01e1);
+	smc911x_miiphy_write(dev, 1, MII_BMCR, BMCR_ANENABLE |
+				BMCR_ANRESTART);
 
 	timeout = 5000;
 	do {
@@ -115,9 +115,9 @@ static void smc911x_phy_configure(struct eth_device *dev)
 		if ((timeout--) == 0)
 			goto err_out;
 
-		if (smc911x_miiphy_read(dev, 1, PHY_BMSR, &status) != 0)
+		if (smc911x_miiphy_read(dev, 1, MII_BMSR, &status) != 0)
 			goto err_out;
-	} while (!(status & PHY_BMSR_LS));
+	} while (!(status & BMSR_LSTATUS));
 
 	printf(DRIVERNAME ": phy initialized\n");
 
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 77908d1e12..9c8fe62441 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -377,11 +377,11 @@ static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
 	 * (ie - we're capable and it's not done)
 	 */
 	mii_reg = read_phy_reg(priv, MIIM_STATUS);
-	if ((mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+	if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
 
 		puts("Waiting for PHY auto negotiation to complete");
-		while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
+		while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
 			/*
 			 * Timeout reached ?
 			 */
@@ -427,17 +427,17 @@ static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
 static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
 {
 	/* We're using autonegotiation */
-	if (mii_reg & PHY_BMSR_AUTN_ABLE) {
+	if (mii_reg & BMSR_ANEGCAPABLE) {
 		uint lpa = 0;
 		uint gblpa = 0;
 
 		/* Check for gigabit capability */
-		if (mii_reg & PHY_BMSR_EXT) {
+		if (mii_reg & BMSR_ERCAP) {
 			/* We want a list of states supported by
 			 * both PHYs in the link
 			 */
-			gblpa = read_phy_reg(priv, PHY_1000BTSR);
-			gblpa &= read_phy_reg(priv, PHY_1000BTCR) << 2;
+			gblpa = read_phy_reg(priv, MII_STAT1000);
+			gblpa &= read_phy_reg(priv, MII_CTRL1000) << 2;
 		}
 
 		/* Set the baseline so we only have to set them
@@ -457,29 +457,29 @@ static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
 			return 0;
 		}
 
-		lpa = read_phy_reg(priv, PHY_ANAR);
-		lpa &= read_phy_reg(priv, PHY_ANLPAR);
+		lpa = read_phy_reg(priv, MII_ADVERTISE);
+		lpa &= read_phy_reg(priv, MII_LPA);
 
-		if (lpa & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) {
+		if (lpa & (LPA_100FULL | LPA_100HALF)) {
 			priv->speed = 100;
 
-			if (lpa & PHY_ANLPAR_TXFD)
+			if (lpa & LPA_100FULL)
 				priv->duplexity = 1;
 
-		} else if (lpa & PHY_ANLPAR_10FD)
+		} else if (lpa & LPA_10FULL)
 			priv->duplexity = 1;
 	} else {
-		uint bmcr = read_phy_reg(priv, PHY_BMCR);
+		uint bmcr = read_phy_reg(priv, MII_BMCR);
 
 		priv->speed = 10;
 		priv->duplexity = 0;
 
-		if (bmcr & PHY_BMCR_DPLX)
+		if (bmcr & BMCR_FULLDPLX)
 			priv->duplexity = 1;
 
-		if (bmcr & PHY_BMCR_1000_MBPS)
+		if (bmcr & BMCR_SPEED1000)
 			priv->speed = 1000;
-		else if (bmcr & PHY_BMCR_100_MBPS)
+		else if (bmcr & BMCR_SPEED100)
 			priv->speed = 100;
 	}
 
@@ -1645,14 +1645,14 @@ static struct phy_info phy_info_ksz804 =  {
 	"Micrel KSZ804 PHY",
 	4,
 	(struct phy_cmd[]) { /* config */
-		{PHY_BMCR, PHY_BMCR_RESET, NULL},
-		{PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+		{MII_BMCR, BMCR_RESET, NULL},
+		{MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
 		{miim_end,}
 	},
 	(struct phy_cmd[]) { /* startup */
-		{PHY_BMSR, miim_read, NULL},
-		{PHY_BMSR, miim_read, &mii_parse_sr},
-		{PHY_BMSR, miim_read, &mii_parse_link},
+		{MII_BMSR, miim_read, NULL},
+		{MII_BMSR, miim_read, &mii_parse_sr},
+		{MII_BMSR, miim_read, &mii_parse_link},
 		{miim_end,}
 	},
 	(struct phy_cmd[]) { /* shutdown */
@@ -1666,14 +1666,14 @@ static struct phy_info phy_info_generic =  {
 	"Unknown/Generic PHY",
 	32,
 	(struct phy_cmd[]) { /* config */
-		{PHY_BMCR, PHY_BMCR_RESET, NULL},
-		{PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+		{MII_BMCR, BMCR_RESET, NULL},
+		{MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
 		{miim_end,}
 	},
 	(struct phy_cmd[]) { /* startup */
-		{PHY_BMSR, miim_read, NULL},
-		{PHY_BMSR, miim_read, &mii_parse_sr},
-		{PHY_BMSR, miim_read, &mii_parse_link},
+		{MII_BMSR, miim_read, NULL},
+		{MII_BMSR, miim_read, &mii_parse_sr},
+		{MII_BMSR, miim_read, &mii_parse_link},
 		{miim_end,}
 	},
 	(struct phy_cmd[]) { /* shutdown */
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 35f2368a80..465a497136 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -242,7 +242,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
 	advertise = mii_info->advertising;
 
 	/* Setup standard advertisement */
-	adv = phy_read (mii_info, PHY_ANAR);
+	adv = phy_read (mii_info, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -252,7 +252,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
 		adv |= ADVERTISE_100HALF;
 	if (advertise & ADVERTISED_100baseT_Full)
 		adv |= ADVERTISE_100FULL;
-	phy_write (mii_info, PHY_ANAR, adv);
+	phy_write (mii_info, MII_ADVERTISE, adv);
 }
 
 static void genmii_setup_forced (struct uec_mii_info *mii_info)
@@ -260,24 +260,24 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
 	u16 ctrl;
 	u32 features = mii_info->phyinfo->features;
 
-	ctrl = phy_read (mii_info, PHY_BMCR);
+	ctrl = phy_read (mii_info, MII_BMCR);
 
-	ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS |
-		  PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON);
-	ctrl |= PHY_BMCR_RESET;
+	ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
+		  BMCR_SPEED1000 | BMCR_ANENABLE);
+	ctrl |= BMCR_RESET;
 
 	switch (mii_info->speed) {
 	case SPEED_1000:
 		if (features & (SUPPORTED_1000baseT_Half
 				| SUPPORTED_1000baseT_Full)) {
-			ctrl |= PHY_BMCR_1000_MBPS;
+			ctrl |= BMCR_SPEED1000;
 			break;
 		}
 		mii_info->speed = SPEED_100;
 	case SPEED_100:
 		if (features & (SUPPORTED_100baseT_Half
 				| SUPPORTED_100baseT_Full)) {
-			ctrl |= PHY_BMCR_100_MBPS;
+			ctrl |= BMCR_SPEED100;
 			break;
 		}
 		mii_info->speed = SPEED_10;
@@ -290,7 +290,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
 		break;
 	}
 
-	phy_write (mii_info, PHY_BMCR, ctrl);
+	phy_write (mii_info, MII_BMCR, ctrl);
 }
 
 /* Enable and Restart Autonegotiation */
@@ -298,9 +298,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info)
 {
 	u16 ctl;
 
-	ctl = phy_read (mii_info, PHY_BMCR);
-	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-	phy_write (mii_info, PHY_BMCR, ctl);
+	ctl = phy_read (mii_info, MII_BMCR);
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+	phy_write (mii_info, MII_BMCR, ctl);
 }
 
 static int gbit_config_aneg (struct uec_mii_info *mii_info)
@@ -335,7 +335,7 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info)
 	/* The Marvell PHY has an errata which requires
 	 * that certain registers get written in order
 	 * to restart autonegotiation */
-	phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET);
+	phy_write (mii_info, MII_BMCR, BMCR_RESET);
 
 	phy_write (mii_info, 0x1d, 0x1f);
 	phy_write (mii_info, 0x1e, 0x200c);
@@ -373,18 +373,18 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
 	u16 status;
 
 	/* Status is read once to clear old link state */
-	phy_read (mii_info, PHY_BMSR);
+	phy_read (mii_info, MII_BMSR);
 
 	/*
 	 * Wait if the link is up, and autonegotiation is in progress
 	 * (ie - we're capable and it's not done)
 	 */
-	status = phy_read(mii_info, PHY_BMSR);
-	if ((status & PHY_BMSR_LS) && (status & PHY_BMSR_AUTN_ABLE)
-	    && !(status & PHY_BMSR_AUTN_COMP)) {
+	status = phy_read(mii_info, MII_BMSR);
+	if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
+	    && !(status & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
 
-		while (!(status & PHY_BMSR_AUTN_COMP)) {
+		while (!(status & BMSR_ANEGCOMPLETE)) {
 			/*
 			 * Timeout reached ?
 			 */
@@ -395,11 +395,11 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
 
 			i++;
 			udelay(1000);	/* 1 ms */
-			status = phy_read(mii_info, PHY_BMSR);
+			status = phy_read(mii_info, MII_BMSR);
 		}
 		mii_info->link = 1;
 	} else {
-		if (status & PHY_BMSR_LS)
+		if (status & BMSR_LSTATUS)
 			mii_info->link = 1;
 		else
 			mii_info->link = 0;
@@ -429,13 +429,13 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
 			else
 				mii_info->duplex = DUPLEX_HALF;
 		} else {
-			status = phy_read(mii_info, PHY_ANLPAR);
+			status = phy_read(mii_info, MII_LPA);
 
-			if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+			if (status & (LPA_10FULL | LPA_100FULL))
 				mii_info->duplex = DUPLEX_FULL;
 			else
 				mii_info->duplex = DUPLEX_HALF;
-			if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+			if (status & (LPA_100FULL | LPA_100HALF))
 				mii_info->speed = SPEED_100;
 			else
 				mii_info->speed = SPEED_10;
@@ -463,8 +463,8 @@ static int bcm_init(struct uec_mii_info *mii_info)
 
 		/* Wait for aneg to complete. */
 		do
-			val = phy_read(mii_info, PHY_BMSR);
-		while (--cnt && !(val & PHY_BMSR_AUTN_COMP));
+			val = phy_read(mii_info, MII_BMSR);
+		while (--cnt && !(val & BMSR_ANEGCOMPLETE));
 
 		/* Set RDX clk delay. */
 		phy_write(mii_info, 0x18, 0x7 | (7 << 12));
@@ -511,7 +511,7 @@ static int marvell_init(struct uec_mii_info *mii_info)
 		temp |= MII_M1111_HWCFG_MODE_RGMII;
 		phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
 
-		phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+		phy_write(mii_info, MII_BMCR, BMCR_RESET);
 	}
 
 	return 0;
@@ -582,11 +582,11 @@ static int marvell_config_intr (struct uec_mii_info *mii_info)
 static int dm9161_init (struct uec_mii_info *mii_info)
 {
 	/* Reset the PHY */
-	phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) |
-		   PHY_BMCR_RESET);
+	phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) |
+		   BMCR_RESET);
 	/* PHY and MAC connect */
-	phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
-		   ~PHY_BMCR_ISO);
+	phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) &
+		   ~BMCR_ISOLATE);
 
 	phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
 
@@ -825,11 +825,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 	struct phy_info *theInfo = NULL;
 
 	/* Grab the bits from PHYIR1, and put them in the upper half */
-	phy_reg = phy_read (mii_info, PHY_PHYIDR1);
+	phy_reg = phy_read (mii_info, MII_PHYSID1);
 	phy_ID = (phy_reg & 0xffff) << 16;
 
 	/* Grab the bits from PHYIR2, and put them in the lower half */
-	phy_reg = phy_read (mii_info, PHY_PHYIDR2);
+	phy_reg = phy_read (mii_info, MII_PHYSID2);
 	phy_ID |= (phy_reg & 0xffff);
 
 	/* loop through all the known PHY types, and find one that */
@@ -900,8 +900,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 
 	/* handle 88e1111 rev.B2 erratum 5.6 */
 	if (mii_info->autoneg) {
-		status = phy_read (mii_info, PHY_BMCR);
-		phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON);
+		status = phy_read (mii_info, MII_BMCR);
+		phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
 	}
 	/* now the B2 will correctly report autoneg completion status */
 }
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 7ac1ff9329..929d9bdd7d 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -169,24 +169,6 @@
 #define ADVERTISED_BNC			(1 << 11)
 #define ADVERTISED_10000baseT_Full	(1 << 12)
 
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
-			ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-		       ADVERTISE_100HALF | ADVERTISE_100FULL)
-
 /* Taken from mii_if_info and sungem_phy.h */
 struct uec_mii_info {
 	/* Information about the PHY type */