net: phy: Add support for Texas Instruments DP83867

Code is taken from Linux kernel driver (v4.2).

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

3 files changed, 204 insertions, 0 deletions

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index d096db87a2..9e4d4927e6 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -24,4 +24,5 @@ obj-$(CONFIG_PHY_NATSEMI) += natsemi.o
 obj-$(CONFIG_PHY_REALTEK) += realtek.o
 obj-$(CONFIG_PHY_SMSC) += smsc.o
 obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
+obj-$(CONFIG_PHY_TI) += ti.o
 obj-$(CONFIG_PHY_VITESSE) += vitesse.o
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d7364ffc34..5633ec2402 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -484,6 +484,9 @@ int phy_init(void)
 #ifdef CONFIG_PHY_TERANETICS
 	phy_teranetics_init();
 #endif
+#ifdef CONFIG_PHY_TI
+	phy_ti_init();
+#endif
 #ifdef CONFIG_PHY_VITESSE
 	phy_vitesse_init();
 #endif
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
new file mode 100644
index 0000000000..541a57f980
--- /dev/null
+++ b/drivers/net/phy/ti.c
@@ -0,0 +1,200 @@
+/*
+ * TI PHY drivers
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ *
+ */
+#include <common.h>
+#include <phy.h>
+
+/* TI DP83867 */
+#define DP83867_DEVADDR		0x1f
+
+#define MII_DP83867_PHYCTRL	0x10
+#define MII_DP83867_MICR	0x12
+#define DP83867_CTRL		0x1f
+
+/* Extended Registers */
+#define DP83867_RGMIICTL	0x0032
+#define DP83867_RGMIIDCTL	0x0086
+
+#define DP83867_SW_RESET	BIT(15)
+#define DP83867_SW_RESTART	BIT(14)
+
+/* MICR Interrupt bits */
+#define MII_DP83867_MICR_AN_ERR_INT_EN		BIT(15)
+#define MII_DP83867_MICR_SPEED_CHNG_INT_EN	BIT(14)
+#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN	BIT(13)
+#define MII_DP83867_MICR_PAGE_RXD_INT_EN	BIT(12)
+#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN	BIT(11)
+#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN	BIT(10)
+#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN	BIT(8)
+#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN	BIT(4)
+#define MII_DP83867_MICR_WOL_INT_EN		BIT(3)
+#define MII_DP83867_MICR_XGMII_ERR_INT_EN	BIT(2)
+#define MII_DP83867_MICR_POL_CHNG_INT_EN	BIT(1)
+#define MII_DP83867_MICR_JABBER_INT_EN		BIT(0)
+
+/* RGMIICTL bits */
+#define DP83867_RGMII_TX_CLK_DELAY_EN		BIT(1)
+#define DP83867_RGMII_RX_CLK_DELAY_EN		BIT(0)
+
+/* PHY CTRL bits */
+#define DP83867_PHYCR_FIFO_DEPTH_SHIFT		14
+
+/* RGMIIDCTL bits */
+#define DP83867_RGMII_TX_CLK_DELAY_SHIFT	4
+
+#define MII_MMD_CTRL	0x0d /* MMD Access Control Register */
+#define MII_MMD_DATA	0x0e /* MMD Access Data Register */
+
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK	0x1f /* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR	0x0000 /* Address */
+#define MII_MMD_CTRL_NOINCR	0x4000 /* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT	0x8000 /* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT	0xC000 /* post increment on writes only */
+
+/**
+ * phy_read_mmd_indirect - reads data from the MMD registers
+ * @phydev: The PHY device bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: it reads data from the MMD registers (clause 22 to access to
+ * clause 45) of the specified phy address.
+ * To read these registers we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Read  reg 14 // Read MMD data
+ */
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
+			  int devad, int addr)
+{
+	int value = -1;
+
+	/* Write the desired MMD Devad */
+	phy_write(phydev, addr, MII_MMD_CTRL, devad);
+
+	/* Write the desired MMD register address */
+	phy_write(phydev, addr, MII_MMD_DATA, prtad);
+
+	/* Select the Function : DATA with no post increment */
+	phy_write(phydev, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+
+	/* Read the content of the MMD's selected register */
+	value = phy_read(phydev, addr, MII_MMD_DATA);
+	return value;
+}
+
+/**
+ * phy_write_mmd_indirect - writes data to the MMD registers
+ * @phydev: The PHY device
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Write data from the MMD registers of the specified
+ * phy address.
+ * To write these registers we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Write reg 14 // Write MMD data
+ */
+void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+			    int devad, int addr, u32 data)
+{
+	/* Write the desired MMD Devad */
+	phy_write(phydev, addr, MII_MMD_CTRL, devad);
+
+	/* Write the desired MMD register address */
+	phy_write(phydev, addr, MII_MMD_DATA, prtad);
+
+	/* Select the Function : DATA with no post increment */
+	phy_write(phydev, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+
+	/* Write the data into MMD's selected register */
+	phy_write(phydev, addr, MII_MMD_DATA, data);
+}
+
+/**
+ * phy_interface_is_rgmii - Convenience function for testing if a PHY interface
+ * is RGMII (all variants)
+ * @phydev: the phy_device struct
+ */
+static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
+{
+	return phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+		phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID;
+}
+
+/* User setting - can be taken from DTS */
+#define RX_ID_DELAY	8
+#define TX_ID_DELAY	0xa
+#define FIFO_DEPTH	1
+
+static int dp83867_config(struct phy_device *phydev)
+{
+	unsigned int val, delay;
+	int ret;
+
+	/* Restart the PHY.  */
+	val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL);
+	phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL,
+		  val | DP83867_SW_RESTART);
+
+	if (phy_interface_is_rgmii(phydev)) {
+		ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
+			(FIFO_DEPTH << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
+		if (ret)
+			return ret;
+	}
+
+	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
+	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+		val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
+					    DP83867_DEVADDR, phydev->addr);
+
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+			val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
+				DP83867_RGMII_RX_CLK_DELAY_EN);
+
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			val |= DP83867_RGMII_TX_CLK_DELAY_EN;
+
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			val |= DP83867_RGMII_RX_CLK_DELAY_EN;
+
+		phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
+				       DP83867_DEVADDR, phydev->addr, val);
+
+		delay = (RX_ID_DELAY |
+			 (TX_ID_DELAY << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
+
+		phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
+				       DP83867_DEVADDR, phydev->addr, delay);
+	}
+
+	genphy_config_aneg(phydev);
+	return 0;
+}
+
+static struct phy_driver DP83867_driver = {
+	.name = "TI DP83867",
+	.uid = 0x2000a231,
+	.mask = 0xfffffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &dp83867_config,
+	.startup = &genphy_startup,
+	.shutdown = &genphy_shutdown,
+};
+
+int phy_ti_init(void)
+{
+	phy_register(&DP83867_driver);
+	return 0;
+}