rockchip: video: Add a display driver for rockchip eDP

Some Rockchip SoCs support embedded DisplayPort output. Add a display driver
for this so that these displays can be used on supported boards.

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 1086 insertions, 1 deletions

diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile
index 361fcb5915..55667199c0 100644
--- a/drivers/video/rockchip/Makefile
+++ b/drivers/video/rockchip/Makefile
@@ -5,4 +5,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += rk_hdmi.o
+obj-y += rk_edp.o rk_hdmi.o
diff --git a/drivers/video/rockchip/rk_edp.c b/drivers/video/rockchip/rk_edp.c
new file mode 100644
index 0000000000..124ddf684b
--- /dev/null
+++ b/drivers/video/rockchip/rk_edp.c
@@ -0,0 +1,1085 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <display.h>
+#include <dm.h>
+#include <edid.h>
+#include <panel.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/edp_rk3288.h>
+#include <asm/arch/grf_rk3288.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+#define DP_LINK_STATUS_SIZE 6
+
+static const char * const voltage_names[] = {
+	"0.4V", "0.6V", "0.8V", "1.2V"
+};
+static const char * const pre_emph_names[] = {
+	"0dB", "3.5dB", "6dB", "9.5dB"
+};
+
+#define DP_VOLTAGE_MAX         DP_TRAIN_VOLTAGE_SWING_1200
+#define DP_PRE_EMPHASIS_MAX    DP_TRAIN_PRE_EMPHASIS_9_5
+
+struct rk_edp_priv {
+	struct rk3288_edp *regs;
+	struct rk3288_grf *grf;
+	struct udevice *panel;
+	struct link_train link_train;
+	u8 train_set[4];
+};
+
+static void rk_edp_init_refclk(struct rk3288_edp *regs)
+{
+	writel(SEL_24M, &regs->analog_ctl_2);
+	writel(REF_CLK_24M, &regs->pll_reg_1);
+
+	writel(LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT | CHG_PUMP_CUR_SEL_5US |
+	       V2L_CUR_SEL_1MA, &regs->pll_reg_2);
+
+	writel(LOCK_DET_CNT_SEL_256 | LOOP_FILTER_RESET | PALL_SSC_RESET |
+	       LOCK_DET_BYPASS | PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE,
+	       &regs->pll_reg_3);
+
+	writel(REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL |
+	       CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP,
+	       &regs->pll_reg_5);
+
+	writel(SSC_OFFSET | SSC_MODE | SSC_DEPTH, &regs->ssc_reg);
+
+	writel(TX_SWING_PRE_EMP_MODE | PRE_DRIVER_PW_CTRL1 |
+	       LP_MODE_CLK_REGULATOR | RESISTOR_MSB_CTRL | RESISTOR_CTRL,
+	       &regs->tx_common);
+
+	writel(DP_AUX_COMMON_MODE | DP_AUX_EN | AUX_TERM_50OHM,
+	       &regs->dp_aux);
+
+	writel(DP_BG_OUT_SEL | DP_DB_CUR_CTRL | DP_BG_SEL | DP_RESISTOR_TUNE_BG,
+	       &regs->dp_bias);
+
+	writel(CH1_CH3_SWING_EMP_CTRL | CH0_CH2_SWING_EMP_CTRL,
+	       &regs->dp_reserv2);
+}
+
+static void rk_edp_init_interrupt(struct rk3288_edp *regs)
+{
+	/* Set interrupt pin assertion polarity as high */
+	writel(INT_POL, &regs->int_ctl);
+
+	/* Clear pending registers */
+	writel(0xff, &regs->common_int_sta_1);
+	writel(0x4f, &regs->common_int_sta_2);
+	writel(0xff, &regs->common_int_sta_3);
+	writel(0x27, &regs->common_int_sta_4);
+	writel(0x7f, &regs->dp_int_sta);
+
+	/* 0:mask,1: unmask */
+	writel(0x00, &regs->common_int_mask_1);
+	writel(0x00, &regs->common_int_mask_2);
+	writel(0x00, &regs->common_int_mask_3);
+	writel(0x00, &regs->common_int_mask_4);
+	writel(0x00, &regs->int_sta_mask);
+}
+
+static void rk_edp_enable_sw_function(struct rk3288_edp *regs)
+{
+	clrbits_le32(&regs->func_en_1, SW_FUNC_EN_N);
+}
+
+static bool rk_edp_get_pll_locked(struct rk3288_edp *regs)
+{
+	u32 val;
+
+	val = readl(&regs->dp_debug_ctl);
+
+	return val & PLL_LOCK;
+}
+
+static int rk_edp_init_analog_func(struct rk3288_edp *regs)
+{
+	ulong start;
+
+	writel(0x00, &regs->dp_pd);
+	writel(PLL_LOCK_CHG, &regs->common_int_sta_1);
+
+	clrbits_le32(&regs->dp_debug_ctl, F_PLL_LOCK | PLL_LOCK_CTRL);
+
+	start = get_timer(0);
+	while (!rk_edp_get_pll_locked(regs)) {
+		if (get_timer(start) > PLL_LOCK_TIMEOUT) {
+			printf("%s: PLL is not locked\n", __func__);
+			return -ETIMEDOUT;
+		}
+	}
+
+	/* Enable Serdes FIFO function and Link symbol clock domain module */
+	clrbits_le32(&regs->func_en_2, SERDES_FIFO_FUNC_EN_N |
+				       LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N |
+				       SSC_FUNC_EN_N);
+
+	return 0;
+}
+
+static void rk_edp_init_aux(struct rk3288_edp *regs)
+{
+	/* Clear inerrupts related to AUX channel */
+	writel(AUX_FUNC_EN_N, &regs->dp_int_sta);
+
+	/* Disable AUX channel module */
+	setbits_le32(&regs->func_en_2, AUX_FUNC_EN_N);
+
+	/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+	writel(DEFER_CTRL_EN | DEFER_COUNT(1), &regs->aux_ch_defer_dtl);
+
+	/* Enable AUX channel module */
+	clrbits_le32(&regs->func_en_2, AUX_FUNC_EN_N);
+}
+
+static int rk_edp_aux_enable(struct rk3288_edp *regs)
+{
+	ulong start;
+
+	setbits_le32(&regs->aux_ch_ctl_2, AUX_EN);
+	start = get_timer(0);
+	do {
+		if (!(readl(&regs->aux_ch_ctl_2) & AUX_EN))
+			return 0;
+	} while (get_timer(start) < 20);
+
+	return -ETIMEDOUT;
+}
+
+static int rk_edp_is_aux_reply(struct rk3288_edp *regs)
+{
+	ulong start;
+
+	start = get_timer(0);
+	while (!(readl(&regs->dp_int_sta) & RPLY_RECEIV)) {
+		if (get_timer(start) > 10)
+			return -ETIMEDOUT;
+	}
+
+	writel(RPLY_RECEIV, &regs->dp_int_sta);
+
+	return 0;
+}
+
+static int rk_edp_start_aux_transaction(struct rk3288_edp *regs)
+{
+	int val, ret;
+
+	/* Enable AUX CH operation */
+	ret = rk_edp_aux_enable(regs);
+	if (ret) {
+		debug("AUX CH enable timeout!\n");
+		return ret;
+	}
+
+	/* Is AUX CH command reply received? */
+	if (rk_edp_is_aux_reply(regs)) {
+		debug("AUX CH command reply failed!\n");
+		return ret;
+	}
+
+	/* Clear interrupt source for AUX CH access error */
+	val = readl(&regs->dp_int_sta);
+	if (val & AUX_ERR) {
+		writel(AUX_ERR, &regs->dp_int_sta);
+		return -EIO;
+	}
+
+	/* Check AUX CH error access status */
+	val = readl(&regs->dp_int_sta);
+	if (val & AUX_STATUS_MASK) {
+		debug("AUX CH error happens: %d\n\n", val & AUX_STATUS_MASK);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int rk_edp_dpcd_transfer(struct rk3288_edp *regs,
+				unsigned int val_addr, u8 *in_data,
+				unsigned int length,
+				enum dpcd_request request)
+{
+	int val;
+	int i, try_times;
+	u8 *data;
+	int ret = 0;
+	u32 len = 0;
+
+	while (length) {
+		len = min(length, 16U);
+		for (try_times = 0; try_times < 10; try_times++) {
+			data = in_data;
+			/* Clear AUX CH data buffer */
+			writel(BUF_CLR, &regs->buf_data_ctl);
+
+			/* Select DPCD device address */
+			writel(AUX_ADDR_7_0(val_addr), &regs->aux_addr_7_0);
+			writel(AUX_ADDR_15_8(val_addr), &regs->aux_addr_15_8);
+			writel(AUX_ADDR_19_16(val_addr), &regs->aux_addr_19_16);
+
+			/*
+			 * Set DisplayPort transaction and read 1 byte
+			 * If bit 3 is 1, DisplayPort transaction.
+			 * If Bit 3 is 0, I2C transaction.
+			 */
+			if (request == DPCD_WRITE) {
+				val = AUX_LENGTH(len) |
+					AUX_TX_COMM_DP_TRANSACTION |
+					AUX_TX_COMM_WRITE;
+				for (i = 0; i < len; i++)
+					writel(*data++, &regs->buf_data[i]);
+			} else
+				val = AUX_LENGTH(len) |
+					AUX_TX_COMM_DP_TRANSACTION |
+					AUX_TX_COMM_READ;
+
+			writel(val, &regs->aux_ch_ctl_1);
+
+			/* Start AUX transaction */
+			ret = rk_edp_start_aux_transaction(regs);
+			if (ret == 0)
+				break;
+			else
+				printf("read dpcd Aux Transaction fail!\n");
+		}
+
+		if (ret)
+			return ret;
+
+		if (request == DPCD_READ) {
+			for (i = 0; i < len; i++)
+				*data++ = (u8)readl(&regs->buf_data[i]);
+		}
+
+		length -= len;
+		val_addr += len;
+		in_data += len;
+	}
+
+	return 0;
+}
+
+static int rk_edp_dpcd_read(struct rk3288_edp *regs, u32 addr, u8 *values,
+			    size_t size)
+{
+	return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_READ);
+}
+
+static int rk_edp_dpcd_write(struct rk3288_edp *regs, u32 addr, u8 *values,
+			     size_t size)
+{
+	return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_WRITE);
+}
+
+
+static int rk_edp_link_power_up(struct rk_edp_priv *edp)
+{
+	u8 value;
+	int ret;
+
+	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
+	if (edp->link_train.revision < 0x11)
+		return 0;
+
+	ret = rk_edp_dpcd_read(edp->regs, DPCD_LINK_POWER_STATE, &value, 1);
+	if (ret)
+		return ret;
+
+	value &= ~DP_SET_POWER_MASK;
+	value |= DP_SET_POWER_D0;
+
+	ret = rk_edp_dpcd_write(edp->regs, DPCD_LINK_POWER_STATE, &value, 1);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to the DP 1.1 specification, a "Sink Device must exit the
+	 * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
+	 * Control Field" (register 0x600).
+	 */
+	mdelay(1);
+
+	return 0;
+}
+
+static int rk_edp_link_configure(struct rk_edp_priv *edp)
+{
+	u8 values[2];
+
+	values[0] = edp->link_train.link_rate;
+	values[1] = edp->link_train.lane_count;
+
+	return rk_edp_dpcd_write(edp->regs, DPCD_LINK_BW_SET, values,
+				 sizeof(values));
+}
+
+static void rk_edp_set_link_training(struct rk_edp_priv *edp,
+				     const u8 *training_values)
+{
+	int i;
+
+	for (i = 0; i < edp->link_train.lane_count; i++)
+		writel(training_values[i], &edp->regs->ln_link_trn_ctl[i]);
+}
+
+static u8 edp_link_status(const u8 *link_status, int r)
+{
+	return link_status[r - DPCD_LANE0_1_STATUS];
+}
+
+static int rk_edp_dpcd_read_link_status(struct rk_edp_priv *edp,
+					u8 *link_status)
+{
+	return rk_edp_dpcd_read(edp->regs, DPCD_LANE0_1_STATUS, link_status,
+				DP_LINK_STATUS_SIZE);
+}
+
+static u8 edp_get_lane_status(const u8 *link_status, int lane)
+{
+	int i = DPCD_LANE0_1_STATUS + (lane >> 1);
+	int s = (lane & 1) * 4;
+	u8 l = edp_link_status(link_status, i);
+
+	return (l >> s) & 0xf;
+}
+
+static int rk_edp_clock_recovery(const u8 *link_status, int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = edp_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static int rk_edp_channel_eq(const u8 *link_status, int lane_count)
+{
+	u8 lane_align;
+	u8 lane_status;
+	int lane;
+
+	lane_align = edp_link_status(link_status,
+				    DPCD_LANE_ALIGN_STATUS_UPDATED);
+	if (!(lane_align & DP_INTERLANE_ALIGN_DONE))
+		return -EIO;
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = edp_get_lane_status(link_status, lane);
+		if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS)
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static uint rk_edp_get_adjust_request_voltage(const u8 *link_status, int lane)
+{
+	int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int s = ((lane & 1) ?
+		 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+		 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	u8 l = edp_link_status(link_status, i);
+
+	return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint rk_edp_get_adjust_request_pre_emphasis(const u8 *link_status,
+						   int lane)
+{
+	int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int s = ((lane & 1) ?
+		 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+		 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	u8 l = edp_link_status(link_status, i);
+
+	return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+static void edp_get_adjust_train(const u8 *link_status, int lane_count,
+				 u8 train_set[])
+{
+	uint v = 0;
+	uint p = 0;
+	int lane;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		uint this_v, this_p;
+
+		this_v = rk_edp_get_adjust_request_voltage(link_status, lane);
+		this_p = rk_edp_get_adjust_request_pre_emphasis(link_status,
+								lane);
+
+		debug("requested signal parameters: lane %d voltage %s pre_emph %s\n",
+		      lane,
+		      voltage_names[this_v >> DP_TRAIN_VOLTAGE_SWING_SHIFT],
+		      pre_emph_names[this_p >> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
+
+		if (this_v > v)
+			v = this_v;
+		if (this_p > p)
+			p = this_p;
+	}
+
+	if (v >= DP_VOLTAGE_MAX)
+		v |= DP_TRAIN_MAX_SWING_REACHED;
+
+	if (p >= DP_PRE_EMPHASIS_MAX)
+		p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	debug("using signal parameters: voltage %s pre_emph %s\n",
+	      voltage_names[(v & DP_TRAIN_VOLTAGE_SWING_MASK)
+			>> DP_TRAIN_VOLTAGE_SWING_SHIFT],
+	      pre_emph_names[(p & DP_TRAIN_PRE_EMPHASIS_MASK)
+			>> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
+
+	for (lane = 0; lane < 4; lane++)
+		train_set[lane] = v | p;
+}
+
+static int rk_edp_link_train_cr(struct rk_edp_priv *edp)
+{
+	struct rk3288_edp *regs = edp->regs;
+	int clock_recovery;
+	uint voltage, tries = 0;
+	u8 status[DP_LINK_STATUS_SIZE];
+	int i, ret;
+	u8 value;
+
+	value = DP_TRAINING_PATTERN_1;
+	writel(value, &regs->dp_training_ptn_set);
+	ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1);
+	if (ret)
+		return ret;
+	memset(edp->train_set, '\0', sizeof(edp->train_set));
+
+	/* clock recovery loop */
+	clock_recovery = 0;
+	tries = 0;
+	voltage = 0xff;
+
+	while (1) {
+		rk_edp_set_link_training(edp, edp->train_set);
+		ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_LANE0_SET,
+					edp->train_set,
+					edp->link_train.lane_count);
+		if (ret)
+			return ret;
+
+		mdelay(1);
+
+		ret = rk_edp_dpcd_read_link_status(edp, status);
+		if (ret) {
+			printf("displayport link status failed, ret=%d\n", ret);
+			break;
+		}
+
+		clock_recovery = rk_edp_clock_recovery(status,
+						edp->link_train.lane_count);
+		if (!clock_recovery)
+			break;
+
+		for (i = 0; i < edp->link_train.lane_count; i++) {
+			if ((edp->train_set[i] &
+				DP_TRAIN_MAX_SWING_REACHED) == 0)
+				break;
+		}
+		if (i == edp->link_train.lane_count) {
+			printf("clock recovery reached max voltage\n");
+			break;
+		}
+
+		if ((edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) ==
+				voltage) {
+			if (++tries == MAX_CR_LOOP) {
+				printf("clock recovery tried 5 times\n");
+				break;
+			}
+		} else {
+			tries = 0;
+		}
+
+		voltage = edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+		/* Compute new train_set as requested by sink */
+		edp_get_adjust_train(status, edp->link_train.lane_count,
+				     edp->train_set);
+	}
+	if (clock_recovery) {
+		printf("clock recovery failed: %d\n", clock_recovery);
+		return clock_recovery;
+	} else {
+		debug("clock recovery at voltage %d pre-emphasis %d\n",
+		      edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
+		      (edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK) >>
+				DP_TRAIN_PRE_EMPHASIS_SHIFT);
+		return 0;
+	}
+}
+
+static int rk_edp_link_train_ce(struct rk_edp_priv *edp)
+{
+	struct rk3288_edp *regs = edp->regs;
+	int channel_eq;
+	u8 value;
+	int tries;
+	u8 status[DP_LINK_STATUS_SIZE];
+	int ret;
+
+	value = DP_TRAINING_PATTERN_2;
+	writel(value, &regs->dp_training_ptn_set);
+	ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1);
+	if (ret)
+		return ret;
+
+	/* channel equalization loop */
+	channel_eq = 0;
+	for (tries = 0; tries < 5; tries++) {
+		rk_edp_set_link_training(edp, edp->train_set);
+		udelay(400);
+
+		if (rk_edp_dpcd_read_link_status(edp, status) < 0) {
+			printf("displayport link status failed\n");
+			return -1;
+		}
+
+		channel_eq = rk_edp_channel_eq(status,
+					       edp->link_train.lane_count);
+		if (!channel_eq)
+			break;
+		edp_get_adjust_train(status, edp->link_train.lane_count,
+				     edp->train_set);
+	}
+
+	if (channel_eq) {
+		printf("channel eq failed, ret=%d\n", channel_eq);
+		return channel_eq;
+	}
+
+	debug("channel eq at voltage %d pre-emphasis %d\n",
+	      edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
+	      (edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK)
+			>> DP_TRAIN_PRE_EMPHASIS_SHIFT);
+
+	return 0;
+}
+
+static int rk_edp_init_training(struct rk_edp_priv *edp)
+{
+	u8 values[3];
+	int ret;
+
+	ret = rk_edp_dpcd_read(edp->regs, DPCD_DPCD_REV, values,
+			       sizeof(values));
+	if (ret < 0)
+		return ret;
+
+	edp->link_train.revision = values[0];
+	edp->link_train.link_rate = values[1];
+	edp->link_train.lane_count = values[2] & DP_MAX_LANE_COUNT_MASK;
+
+	debug("max link rate:%d.%dGps max number of lanes:%d\n",
+	      edp->link_train.link_rate * 27 / 100,
+	      edp->link_train.link_rate * 27 % 100,
+	      edp->link_train.lane_count);
+
+	if ((edp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
+	    (edp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+		debug("Rx Max Link Rate is abnormal :%x\n",
+		      edp->link_train.link_rate);
+		return -EPERM;
+	}
+
+	if (edp->link_train.lane_count == 0) {
+		debug("Rx Max Lane count is abnormal :%x\n",
+		      edp->link_train.lane_count);
+		return -EPERM;
+	}
+
+	ret = rk_edp_link_power_up(edp);
+	if (ret)
+		return ret;
+
+	return rk_edp_link_configure(edp);
+}
+
+static int rk_edp_hw_link_training(struct rk_edp_priv *edp)
+{
+	ulong start;
+	u32 val;
+	int ret;
+
+	/* Set link rate and count as you want to establish */
+	writel(edp->link_train.link_rate, &edp->regs->link_bw_set);
+	writel(edp->link_train.lane_count, &edp->regs->lane_count_set);
+
+	ret = rk_edp_link_train_cr(edp);
+	if (ret)
+		return ret;
+	ret = rk_edp_link_train_ce(edp);
+	if (ret)
+		return ret;
+
+	writel(HW_LT_EN, &edp->regs->dp_hw_link_training);
+	start = get_timer(0);
+	do {
+		val = readl(&edp->regs->dp_hw_link_training);
+		if (!(val & HW_LT_EN))
+			break;
+	} while (get_timer(start) < 10);
+
+	if (val & HW_LT_ERR_CODE_MASK) {
+		printf("edp hw link training error: %d\n",
+		       val >> HW_LT_ERR_CODE_SHIFT);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int rk_edp_select_i2c_device(struct rk3288_edp *regs,
+				    unsigned int device_addr,
+				    unsigned int val_addr)
+{
+	int ret;
+
+	/* Set EDID device address */
+	writel(device_addr, &regs->aux_addr_7_0);
+	writel(0x0, &regs->aux_addr_15_8);
+	writel(0x0, &regs->aux_addr_19_16);
+
+	/* Set offset from base address of EDID device */
+	writel(val_addr, &regs->buf_data[0]);
+
+	/*
+	 * Set I2C transaction and write address
+	 * If bit 3 is 1, DisplayPort transaction.
+	 * If Bit 3 is 0, I2C transaction.
+	 */
+	writel(AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
+	       AUX_TX_COMM_WRITE, &regs->aux_ch_ctl_1);
+
+	/* Start AUX transaction */
+	ret = rk_edp_start_aux_transaction(regs);
+	if (ret != 0) {
+		debug("select_i2c_device Aux Transaction fail!\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rk_edp_i2c_read(struct rk3288_edp *regs, unsigned int device_addr,
+			   unsigned int val_addr, unsigned int count, u8 edid[])
+{
+	u32 val;
+	unsigned int i, j;
+	unsigned int cur_data_idx;
+	unsigned int defer = 0;
+	int ret = 0;
+
+	for (i = 0; i < count; i += 16) {
+		for (j = 0; j < 10; j++) { /* try 10 times */
+			/* Clear AUX CH data buffer */
+			writel(BUF_CLR, &regs->buf_data_ctl);
+
+			/* Set normal AUX CH command */
+			clrbits_le32(&regs->aux_ch_ctl_2, ADDR_ONLY);
+
+			/*
+			 * If Rx sends defer, Tx sends only reads
+			 * request without sending addres
+			 */
+			if (!defer) {
+				ret = rk_edp_select_i2c_device(regs,
+							       device_addr,
+							       val_addr + i);
+			} else {
+				defer = 0;
+			}
+
+			/*
+			 * Set I2C transaction and write data
+			 * If bit 3 is 1, DisplayPort transaction.
+			 * If Bit 3 is 0, I2C transaction.
+			 */
+			writel(AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION |
+			       AUX_TX_COMM_READ, &regs->aux_ch_ctl_1);
+
+			/* Start AUX transaction */
+			ret = rk_edp_start_aux_transaction(regs);
+			if (ret == 0) {
+				break;
+			} else {
+				debug("Aux Transaction fail!\n");
+				continue;
+			}
+
+			/* Check if Rx sends defer */
+			val = readl(&regs->aux_rx_comm);
+			if (val == AUX_RX_COMM_AUX_DEFER ||
+			    val == AUX_RX_COMM_I2C_DEFER) {
+				debug("Defer: %d\n\n", val);
+				defer = 1;
+			}
+		}
+
+		if (ret)
+			return ret;
+
+		for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
+			val = readl(&regs->buf_data[cur_data_idx]);
+			edid[i + cur_data_idx] = (u8)val;
+		}
+	}
+
+	return 0;
+}
+
+static int rk_edp_set_link_train(struct rk_edp_priv *edp)
+{
+	int ret;
+
+	ret = rk_edp_init_training(edp);
+	if (ret) {
+		printf("DP LT init failed!\n");
+		return ret;
+	}
+
+	ret = rk_edp_hw_link_training(edp);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void rk_edp_init_video(struct rk3288_edp *regs)
+{
+	writel(VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG,
+	       &regs->common_int_sta_1);
+	writel(CHA_CRI(4) | CHA_CTRL, &regs->sys_ctl_2);
+	writel(VID_HRES_TH(2) | VID_VRES_TH(0), &regs->video_ctl_8);
+}
+
+static void rk_edp_config_video_slave_mode(struct rk3288_edp *regs)
+{
+	clrbits_le32(&regs->func_en_1, VID_FIFO_FUNC_EN_N | VID_CAP_FUNC_EN_N);
+}
+
+static void rk_edp_set_video_cr_mn(struct rk3288_edp *regs,
+				   enum clock_recovery_m_value_type type,
+				   u32 m_value,
+				   u32 n_value)
+{
+	if (type == REGISTER_M) {
+		setbits_le32(&regs->sys_ctl_4, FIX_M_VID);
+		writel(m_value & 0xff, &regs->m_vid_0);
+		writel((m_value >> 8) & 0xff, &regs->m_vid_1);
+		writel((m_value >> 16) & 0xff, &regs->m_vid_2);
+
+		writel(n_value & 0xf, &regs->n_vid_0);
+		writel((n_value >> 8) & 0xff, &regs->n_vid_1);
+		writel((n_value >> 16) & 0xff, &regs->n_vid_2);
+	} else {
+		clrbits_le32(&regs->sys_ctl_4, FIX_M_VID);
+
+		writel(0x00, &regs->n_vid_0);
+		writel(0x80, &regs->n_vid_1);
+		writel(0x00, &regs->n_vid_2);
+	}
+}
+
+static int rk_edp_is_video_stream_clock_on(struct rk3288_edp *regs)
+{
+	ulong start;
+	u32 val;
+
+	start = get_timer(0);
+	do {
+		val = readl(&regs->sys_ctl_1);
+
+		/* must write value to update DET_STA bit status */
+		writel(val, &regs->sys_ctl_1);
+		val = readl(&regs->sys_ctl_1);
+		if (!(val & DET_STA))
+			continue;
+
+		val = readl(&regs->sys_ctl_2);
+
+		/* must write value to update CHA_STA bit status */
+		writel(val, &regs->sys_ctl_2);
+		val = readl(&regs->sys_ctl_2);
+		if (!(val & CHA_STA))
+			return 0;
+
+	} while (get_timer(start) < 100);
+
+	return -ETIMEDOUT;
+}
+
+static int rk_edp_is_video_stream_on(struct rk_edp_priv *edp)
+{
+	ulong start;
+	u32 val;
+
+	start = get_timer(0);
+	do {
+		val = readl(&edp->regs->sys_ctl_3);
+
+		/* must write value to update STRM_VALID bit status */
+		writel(val, &edp->regs->sys_ctl_3);
+
+		val = readl(&edp->regs->sys_ctl_3);
+		if (!(val & STRM_VALID))
+			return 0;
+	} while (get_timer(start) < 100);
+
+	return -ETIMEDOUT;
+}
+
+static int rk_edp_config_video(struct rk_edp_priv *edp)
+{
+	int ret;
+
+	rk_edp_config_video_slave_mode(edp->regs);
+
+	if (!rk_edp_get_pll_locked(edp->regs)) {
+		debug("PLL is not locked yet.\n");
+		return -ETIMEDOUT;
+	}
+
+	ret = rk_edp_is_video_stream_clock_on(edp->regs);
+	if (ret)
+		return ret;
+
+	/* Set to use the register calculated M/N video */
+	rk_edp_set_video_cr_mn(edp->regs, CALCULATED_M, 0, 0);
+
+	/* For video bist, Video timing must be generated by register */
+	clrbits_le32(&edp->regs->video_ctl_10, F_SEL);
+
+	/* Disable video mute */
+	clrbits_le32(&edp->regs->video_ctl_1, VIDEO_MUTE);
+
+	/* Enable video at next frame */
+	setbits_le32(&edp->regs->video_ctl_1, VIDEO_EN);
+
+	return rk_edp_is_video_stream_on(edp);
+}
+
+static void rockchip_edp_force_hpd(struct rk_edp_priv *edp)
+{
+	setbits_le32(&edp->regs->sys_ctl_3, F_HPD | HPD_CTRL);
+}
+
+static int rockchip_edp_get_plug_in_status(struct rk_edp_priv *edp)
+{
+	u32 val;
+
+	val = readl(&edp->regs->sys_ctl_3);
+	if (val & HPD_STATUS)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * support edp HPD function
+ * some hardware version do not support edp hdp,
+ * we use 200ms to try to get the hpd single now,
+ * if we can not get edp hpd single, it will delay 200ms,
+ * also meet the edp power timing request, to compatible
+ * all of the hardware version
+ */
+static void rockchip_edp_wait_hpd(struct rk_edp_priv *edp)
+{
+	ulong start;
+
+	start = get_timer(0);
+	do {
+		if (rockchip_edp_get_plug_in_status(edp))
+			return;
+		udelay(100);
+	} while (get_timer(start) < 200);
+
+	debug("do not get hpd single, force hpd\n");
+	rockchip_edp_force_hpd(edp);
+}
+
+static int rk_edp_enable(struct udevice *dev, int panel_bpp,
+			 const struct display_timing *edid)
+{
+	struct rk_edp_priv *priv = dev_get_priv(dev);
+	int ret = 0;
+
+	ret = rk_edp_set_link_train(priv);
+	if (ret) {
+		printf("link train failed!\n");
+		return ret;
+	}
+
+	rk_edp_init_video(priv->regs);
+	ret = rk_edp_config_video(priv);
+	if (ret) {
+		printf("config video failed\n");
+		return ret;
+	}
+	ret = panel_enable_backlight(priv->panel);
+	if (ret) {
+		debug("%s: backlight error: %d\n", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rk_edp_read_edid(struct udevice *dev, u8 *buf, int buf_size)
+{
+	struct rk_edp_priv *priv = dev_get_priv(dev);
+	u32 edid_size = EDID_LENGTH;
+	int ret;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		ret = rk_edp_i2c_read(priv->regs, EDID_ADDR, EDID_HEADER,
+				      EDID_LENGTH, &buf[EDID_HEADER]);
+		if (ret) {
+			debug("EDID read failed\n");
+			continue;
+		}
+
+		/*
+		 * check if the EDID has an extension flag, and read additional
+		 * EDID data if needed
+		 */
+		if (buf[EDID_EXTENSION_FLAG]) {
+			edid_size += EDID_LENGTH;
+			ret = rk_edp_i2c_read(priv->regs, EDID_ADDR,
+					      EDID_LENGTH, EDID_LENGTH,
+					      &buf[EDID_LENGTH]);
+			if (ret) {
+				debug("EDID Read failed!\n");
+				continue;
+			}
+		}
+		goto done;
+	}
+
+	/* After 3 attempts, give up */
+	return ret;
+
+done:
+	return edid_size;
+}
+
+static int rk_edp_ofdata_to_platdata(struct udevice *dev)
+{
+	struct rk_edp_priv *priv = dev_get_priv(dev);
+
+	priv->regs = (struct rk3288_edp *)dev_get_addr(dev);
+	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+	return 0;
+}
+
+int rk_edp_probe(struct udevice *dev)
+{
+	struct display_plat *uc_plat = dev_get_uclass_platdata(dev);
+	struct rk_edp_priv *priv = dev_get_priv(dev);
+	struct rk3288_edp *regs = priv->regs;
+	struct udevice *clk;
+	int periph;
+	int ret;
+
+	ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
+					   &priv->panel);
+	if (ret) {
+		debug("%s: Cannot find panel for '%s' (ret=%d)\n", __func__,
+		      dev->name, ret);
+		return ret;
+	}
+
+	int vop_id = uc_plat->source_id;
+	debug("%s, uc_plat=%p, vop_id=%u\n", __func__, uc_plat, vop_id);
+
+	ret = clk_get_by_index(dev, 1, &clk);
+	if (ret >= 0) {
+		periph = ret;
+		ret = clk_set_periph_rate(clk, periph, 0);
+	}
+	if (ret) {
+		debug("%s: Failed to set EDP clock: ret=%d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = clk_get_by_index(uc_plat->src_dev, 0, &clk);
+	if (ret >= 0) {
+		periph = ret;
+		ret = clk_set_periph_rate(clk, periph, 192000000);
+	}
+	if (ret < 0) {
+		debug("%s: Failed to set clock in source device '%s': ret=%d\n",
+		      __func__, uc_plat->src_dev->name, ret);
+		return ret;
+	}
+
+	/* grf_edp_ref_clk_sel: from internal 24MHz or 27MHz clock */
+	rk_setreg(&priv->grf->soc_con12, 1 << 4);
+
+	/* select epd signal from vop0 or vop1 */
+	rk_setreg(&priv->grf->soc_con6, (vop_id == 1) ? (1 << 5) : (1 << 5));
+
+	rockchip_edp_wait_hpd(priv);
+
+	rk_edp_init_refclk(regs);
+	rk_edp_init_interrupt(regs);
+	rk_edp_enable_sw_function(regs);
+	ret = rk_edp_init_analog_func(regs);
+	if (ret)
+		return ret;
+	rk_edp_init_aux(regs);
+
+	return 0;
+}
+
+static const struct dm_display_ops dp_rockchip_ops = {
+	.read_edid = rk_edp_read_edid,
+	.enable = rk_edp_enable,
+};
+
+static const struct udevice_id rockchip_dp_ids[] = {
+	{ .compatible = "rockchip,rk3288-edp" },
+	{ }
+};
+
+U_BOOT_DRIVER(dp_rockchip) = {
+	.name	= "edp_rockchip",
+	.id	= UCLASS_DISPLAY,
+	.of_match = rockchip_dp_ids,
+	.ops	= &dp_rockchip_ops,
+	.ofdata_to_platdata	= rk_edp_ofdata_to_platdata,
+	.probe	= rk_edp_probe,
+	.priv_auto_alloc_size	= sizeof(struct rk_edp_priv),
+};