sunxi: axp: Remove non driver-model support from the axp gpio code

Now that all sunxi boards are using driver-model for gpio (*), we can remove
the non driver-model support from the axp gpio code, and the glue to call
into the axp gpio code from the sunxi_gpio non driver-model code.

*) For the regular u-boot build, SPL still uses non driver-model gpio for
now, but the SPL never uses axp gpios support and we were already not building
axp-gpio support for the SPL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

2 files changed, 8 insertions, 41 deletions

diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c
index 55f20a34b6..2e97cc39d6 100644
--- a/drivers/gpio/axp_gpio.c
+++ b/drivers/gpio/axp_gpio.c
@@ -26,6 +26,8 @@
 #error Unknown AXP model
 #endif
 
+static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
+
 static u8 axp_get_gpio_ctrl_reg(unsigned pin)
 {
 	switch (pin) {
@@ -41,7 +43,7 @@ static u8 axp_get_gpio_ctrl_reg(unsigned pin)
 	return 0;
 }
 
-int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
+static int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
 {
 	u8 reg;
 
@@ -59,7 +61,8 @@ int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
 	}
 }
 
-int axp_gpio_direction_output(struct udevice *dev, unsigned pin, int val)
+static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
+				     int val)
 {
 	__maybe_unused int ret;
 	u8 reg;
@@ -84,7 +87,7 @@ int axp_gpio_direction_output(struct udevice *dev, unsigned pin, int val)
 	}
 }
 
-int axp_gpio_get_value(struct udevice *dev, unsigned pin)
+static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
 {
 	u8 reg, val, mask;
 	int ret;
@@ -116,7 +119,7 @@ int axp_gpio_get_value(struct udevice *dev, unsigned pin)
 	return (val & mask) ? 1 : 0;
 }
 
-int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
+static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
 {
 	u8 reg;
 
@@ -140,7 +143,6 @@ int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
 	}
 }
 
-#ifdef CONFIG_DM_GPIO
 static const struct dm_gpio_ops gpio_axp_ops = {
 	.direction_input	= axp_gpio_direction_input,
 	.direction_output	= axp_gpio_direction_output,
@@ -165,23 +167,20 @@ U_BOOT_DRIVER(gpio_axp) = {
 	.ops	= &gpio_axp_ops,
 	.probe	= gpio_axp_probe,
 };
-#endif
 
 int axp_gpio_init(void)
 {
-	__maybe_unused struct udevice *dev;
+	struct udevice *dev;
 	int ret;
 
 	ret = pmic_bus_init();
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_DM_GPIO
 	/* There is no devicetree support for the axp yet, so bind directly */
 	ret = device_bind_driver(dm_root(), "gpio_axp", "AXP-gpio", &dev);
 	if (ret)
 		return ret;
-#endif
 
 	return 0;
 }
diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
index 21c3ff1e75..f9881308f4 100644
--- a/drivers/gpio/sunxi_gpio.c
+++ b/drivers/gpio/sunxi_gpio.c
@@ -74,10 +74,6 @@ int gpio_free(unsigned gpio)
 
 int gpio_direction_input(unsigned gpio)
 {
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_direction_input(NULL, gpio - SUNXI_GPIO_AXP0_START);
-#endif
 	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT);
 
 	return 0;
@@ -85,11 +81,6 @@ int gpio_direction_input(unsigned gpio)
 
 int gpio_direction_output(unsigned gpio, int value)
 {
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_direction_output(NULL, gpio - SUNXI_GPIO_AXP0_START,
-						 value);
-#endif
 	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT);
 
 	return sunxi_gpio_output(gpio, value);
@@ -97,19 +88,11 @@ int gpio_direction_output(unsigned gpio, int value)
 
 int gpio_get_value(unsigned gpio)
 {
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_get_value(NULL, gpio - SUNXI_GPIO_AXP0_START);
-#endif
 	return sunxi_gpio_input(gpio);
 }
 
 int gpio_set_value(unsigned gpio, int value)
 {
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_set_value(NULL, gpio - SUNXI_GPIO_AXP0_START, value);
-#endif
 	return sunxi_gpio_output(gpio, value);
 }
 
@@ -120,21 +103,6 @@ int sunxi_name_to_gpio(const char *name)
 	long pin;
 	char *eptr;
 
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
-	if (strncasecmp(name, "AXP0-", 5) == 0) {
-		name += 5;
-		if (strcmp(name, "VBUS-DETECT") == 0)
-			return SUNXI_GPIO_AXP0_START +
-				SUNXI_GPIO_AXP0_VBUS_DETECT;
-		if (strcmp(name, "VBUS-ENABLE") == 0)
-			return SUNXI_GPIO_AXP0_START +
-				SUNXI_GPIO_AXP0_VBUS_ENABLE;
-		pin = simple_strtol(name, &eptr, 10);
-		if (!*name || *eptr)
-			return -1;
-		return SUNXI_GPIO_AXP0_START + pin;
-	}
-#endif
 	if (*name == 'P' || *name == 'p')
 		name++;
 	if (*name >= 'A') {