summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2007-03-04 01:36:05 +0100
committerWolfgang Denk <wd@denx.de>2007-03-04 01:36:05 +0100
commit647d3c3eed0da1d1505eecabe0b0fab96f956e68 (patch)
tree0a0eddcc2d78152884122cf2695bd9ebee6c4ab5 /doc
parentb24444f1b3ef428b8f85974d23d4edb16e9a046f (diff)
downloadblackbird-obmc-uboot-647d3c3eed0da1d1505eecabe0b0fab96f956e68.tar.gz
blackbird-obmc-uboot-647d3c3eed0da1d1505eecabe0b0fab96f956e68.zip
Some code cleanup.
Diffstat (limited to 'doc')
-rw-r--r--doc/README.mpc7448hpc225
1 files changed, 12 insertions, 13 deletions
diff --git a/doc/README.mpc7448hpc2 b/doc/README.mpc7448hpc2
index 0e40e39269..8659e83673 100644
--- a/doc/README.mpc7448hpc2
+++ b/doc/README.mpc7448hpc2
@@ -92,7 +92,7 @@ SW2[1-6]: CPU core frequency
CPU Core Frequency (MHz)
Bus Frequency
123456 100 133 167 200 Ratio
-
+
------
SW2=101100 500 667 833 1000 5x
SW2=100100 550 733 917 1100 5.5x
@@ -109,43 +109,43 @@ hardware specifications for more information.
SW2[7-8]: Bus Protocol and CPU Reset Option
- 7
+ 7
-
SW2=0 System bus uses MPX bus protocol
SW2=1 System bus uses 60x bus protocol
- 8
+ 8
-
SW2=0 TSI108 can cause CPU reset
SW2=1 TSI108 can not cause CPU reset
SW3[1-8] system options
- 123
+ 123
---
SW3=xxx Connected to GPIO[0:2] on TSI108
- 4
+ 4
-
SW3=0 CPU boots from low half of flash
SW3=1 CPU boots from high half of flash
- 5
+ 5
-
SW3=0 SATA and slot2 connected to PCI bus
SW3=1 Only slot1 connected to PCI bus
- 6
+ 6
-
SW3=0 USB connected to PCI bus
SW3=1 USB disconnected from PCI bus
- 7
+ 7
-
SW3=0 Flash is write protected
SW3=1 Flash is NOT write protected
- 8
+ 8
-
SW3=0 CPU will boot from flash
SW3=1 CPU will boot from PromJet
@@ -166,20 +166,19 @@ SW4[4-6]: DDR2 SDRAM frequency
Bus Frequency (MHz)
---
SW4=000 external clock
- SW4=011 system clock
+ SW4=011 system clock
SW4=100 133
SW4=101 166
SW4=110 200
others reserved
SW4[7-8]: PCI/PCI-X frequency control
- 7
+ 7
-
SW4=0 PCI/PCI-X bus operates normally
SW4=1 PCI bus forced to PCI-33 mode
- 8
+ 8
-
SW4=0 PCI-X mode at 133 MHz allowed
SW4=1 PCI-X mode limited to 100 MHz
-
OpenPOWER on IntegriCloud