doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 0 insertions, 482 deletions

diff --git a/doc/README.alaska8220 b/doc/README.alaska8220
deleted file mode 100644
index 334507397d..0000000000
--- a/doc/README.alaska8220
+++ /dev/null
@@ -1,482 +0,0 @@
-Freescale Alaska MPC8220 board
-==============================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created 9/21/04
-===========================================
-
-
-Changed files:
-==============
-
-- Makefile		    added MPC8220 and Alaska8220_config
-- MAKEALL		    added MPC8220 and Alaska8220
-- README		    added CONFIG_MPC8220, Alaska8220_config
-
-- common/cmd_bdinfo.c	    added board information members for MPC8220
-- common/cmd_bootm.c	    added clocks for MPC8220 in do_bootm_linux()
-
-- include/common.h	    added CONFIG_MPC8220
-
-- include/asm-ppc/u-boot.h  added board information members for MPC8220
-- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
-			    vco_clk, pev_clk, flb_clk, and bExtUart
-
-- arch/powerpc/lib/board.c	    added CONFIG_MPC8220 support
-
-- net/eth.c		    added FEC support for MPC8220
-
-Added files:
-============
-- board/alaska		    directory for Alaska MPC8220
-- board/alaska/alaska.c	    Alaska dram and BATs setup
-- board/alaska/extserial.c  external serial (debug card serial) support
-- board/alaska/flash.c	    Socket (AMD) and Onboard (INTEL) flash support
-- board/alaska/serial.c	    to determine which int/ext serial to use
-- board/alaska/Makefile	    Makefile
-- board/alaska/config.mk    config make
-- board/alaska/u-boot.lds   Linker description
-
-- arch/powerpc/cpu/mpc8220/dma.h	    multi-channel dma header file
-- arch/powerpc/cpu/mpc8220/dramSetup.h   dram setup header file
-- arch/powerpc/cpu/mpc8220/fec.h	    MPC8220 FEC header file
-- arch/powerpc/cpu/mpc8220/cpu.c	    cpu specific code
-- arch/powerpc/cpu/mpc8220/cpu_init.c    Flexbus ChipSelect and Mux pins setup
-- arch/powerpc/cpu/mpc8220/dramSetup.c   MPC8220 DDR SDRAM setup
-- arch/powerpc/cpu/mpc8220/fec.c	    MPC8220 FEC driver
-- arch/powerpc/cpu/mpc8220/i2c.c	    MPC8220 I2C driver
-- arch/powerpc/cpu/mpc8220/interrupts.c  interrupt support (not enable)
-- arch/powerpc/cpu/mpc8220/loadtask.c    load dma
-- arch/powerpc/cpu/mpc8220/speed.c	    system, pci, flexbus, pev, and cpu clock
-- arch/powerpc/cpu/mpc8220/traps.c	    exception
-- arch/powerpc/cpu/mpc8220/uart.c	    MPC8220 UART driver
-- arch/powerpc/cpu/mpc8220/Makefile	    Makefile
-- arch/powerpc/cpu/mpc8220/config.mk	    config make
-- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/powerpc/cpu/mpc8220/io.S	    io functions
-- arch/powerpc/cpu/mpc8220/start.S	    start up
-
-- include/mpc8220.h
-
-- include/asm-ppc/immap_8220.h
-
-- include/configs/Alaska8220.h
-
-
-1. SWITCH SETTINGS
-==================
-1.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL)
-    SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART
-    SW3: unsed
-    SW4: 0 - 1284 or 1 - FEC1
-    SW5: 0 - PEV or 1 - FEC2
-
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
-     linux kernel, you can customize it based on your system requirements:
-      DDR:	    0x00000000-0x1fffffff (max 512MB)
-      MBAR:	    0xf0000000-0xf0027fff (128KB)
-      CPLD:	    0xf1000000-0xf103ffff (256KB)
-      FPGA:	    0xf2000000-0xf203ffff (256KB)
-      Flash:	    0xfe000000-0xffffffff (max 32MB)
-
-3. DEFINITIONS AND COMPILATION
-==============================
-3.1 Explanation on NEW definitions in include/configs/alaska8220.h
-    CONFIG_MPC8220	    MPC8220 specific
-    CONFIG_ALASKA8220	    Alaska board specific
-    CONFIG_SYS_MPC8220_CLKIN	    Define Alaska Input Clock
-    CONFIG_PSC_CONSOLE	    Enable MPC8220 UART
-    CONFIG_EXTUART_CONSOLE  Enable External 16552 UART
-    CONFIG_SYS_AMD_BOOT	    To determine the u-boot is booted from AMD or Intel
-    CONFIG_SYS_MBAR		    MBAR base address
-    CONFIG_SYS_DEFAULT_MBAR	    Reset MBAR base address
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1-1-x
-   make distclean
-   make Alaska8220_config
-   make
-
-
-4. SCREEN DUMP
-==============
-4.1 Alaska MPC8220 board
-    Boot from AMD (NOTE: May not show exactly the same)
-
-U-Boot 1.1.1 (Sep 22 2004 - 22:14:41)
-
-CPU:   MPC8220 (JTAG ID 1640301d) at 300 MHz
-       Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz
-Board: Alaska MPC8220 Evaluation Board
-I2C:   93 kHz, ready
-DRAM:  256 MB
-Reserving 167k for U-Boot at: 0ffd6000
-FLASH: 16.5 MB
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   FEC ETHERNET
-=> flinfo
-
-Bank # 1: INTEL 28F128J3A
-  Size: 8 MB in 64 Sectors
-  Sector Start Addresses:
-    FE000000	  FE020000	FE040000      FE060000	    FE080000
-    FE0A0000	  FE0C0000	FE0E0000      FE100000	    FE120000
-    FE140000	  FE160000	FE180000      FE1A0000	    FE1C0000
-    FE1E0000	  FE200000	FE220000      FE240000	    FE260000
-    FE280000	  FE2A0000	FE2C0000      FE2E0000	    FE300000
-    FE320000	  FE340000	FE360000      FE380000	    FE3A0000
-    FE3C0000	  FE3E0000	FE400000      FE420000	    FE440000
-    FE460000	  FE480000	FE4A0000      FE4C0000	    FE4E0000
-    FE500000	  FE520000	FE540000      FE560000	    FE580000
-    FE5A0000	  FE5C0000	FE5E0000      FE600000	    FE620000
-    FE640000	  FE660000	FE680000      FE6A0000	    FE6C0000
-    FE6E0000	  FE700000	FE720000      FE740000	    FE760000
-    FE780000	  FE7A0000	FE7C0000      FE7E0000
-
-Bank # 2: INTEL 28F128J3A
-  Size: 8 MB in 64 Sectors
-  Sector Start Addresses:
-    FE800000	  FE820000	FE840000      FE860000	    FE880000
-    FE8A0000	  FE8C0000	FE8E0000      FE900000	    FE920000
-    FE940000	  FE960000	FE980000      FE9A0000	    FE9C0000
-    FE9E0000	  FEA00000	FEA20000      FEA40000	    FEA60000
-    FEA80000	  FEAA0000	FEAC0000      FEAE0000	    FEB00000
-    FEB20000	  FEB40000	FEB60000      FEB80000	    FEBA0000
-    FEBC0000	  FEBE0000	FEC00000      FEC20000	    FEC40000
-    FEC60000	  FEC80000	FECA0000      FECC0000	    FECE0000
-    FED00000	  FED20000	FED40000      FED60000	    FED80000
-    FEDA0000	  FEDC0000	FEDE0000      FEE00000	    FEE20000
-    FEE40000	  FEE60000	FEE80000      FEEA0000	    FEEC0000
-    FEEE0000	  FEF00000 (RO) FEF20000 (RO) FEF40000	    FEF60000
-    FEF80000	  FEFA0000	FEFC0000      FEFE0000 (RO)
-
-Bank # 3: AMD AMD29F040B
-  Size: 0 MB in 7 Sectors
-  Sector Start Addresses:
-    FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000	    FFF40000
-    FFF50000	  FFF60000
-
-Bank # 4: AMD AMD29F040B
-  Size: 0 MB in 1 Sectors
-  Sector Start Addresses:
-    FFF70000 (RO)
-=> bdinfo
-
-memstart    = 0xF0009800
-memsize	    = 0x10000000
-flashstart  = 0xFFF00000
-flashsize   = 0x01080000
-flashoffset = 0x00025000
-sramstart   = 0xF0020000
-sramsize    = 0x00008000
-bootflags   = 0x00000001
-intfreq	    =	 300 MHz
-busfreq	    =	 120 MHz
-inpfreq	    =	  30 MHz
-flbfreq	    =	  30 MHz
-pcifreq	    =	  30 MHz
-vcofreq	    =	 480 MHz
-pevfreq	    =	  81 MHz
-ethaddr	    = 00:E0:0C:BC:E0:60
-eth1addr    = 00:E0:0C:BC:E0:61
-IP addr	    = 192.162.1.2
-baudrate    = 115200 bps
-=> printenv
-bootargs=root=/dev/ram rw
-bootdelay=5
-baudrate=115200
-ethaddr=00:e0:0c:bc:e0:60
-eth1addr=00:e0:0c:bc:e0:61
-ipaddr=192.162.1.2
-serverip=192.162.1.1
-gatewayip=192.162.1.1
-netmask=255.255.255.0
-hostname=Alaska
-stdin=serial
-stdout=serial
-stderr=serial
-ethact=FEC ETHERNET
-
-Environment size: 268/65532 bytes
-=> setenv ipaddr 192.160.1.2
-=> setenv serverip 192.160.1.1
-=> setenv gatewayip 192.160.1.1
-=> saveenv
-Saving Environment to Flash...
-
-.
-Un-Protected 1 sectors
-Erasing Flash...
-Erasing sector	0 ...  done
-Erased 1 sectors
-Writing to Flash... done
-
-.
-Protected 1 sectors
-=> tftp 0x10000 linux.elf
-Using FEC ETHERNET device
-TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1
-Filename 'linux.elf'.
-Load address: 0x10000
-Loading: invalid RARP header
-#################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 ##################################################
-done
-Bytes transferred = 2917494 (2c8476 hex)
-=> bootelf
-Loading .text @ 0x00a00000 (23820 bytes)
-Loading .data @ 0x00a06000 (2752512 bytes)
-Clearing .bss @ 0x00ca6000 (12764 bytes)
-## Starting application at 0x00a00000 ...
-
-Collect some entropy from RAM........done
-loaded at:     00A00000 00CA91DC
-zimage at:     00A06A93 00AD7756
-initrd at:     00AD8000 00CA5565
-avail ram:     00CAA000 014AA000
-
-Linux/PPC load: ip=off console=ttyS0,115200
-Uncompressing Linux...done.
-Now booting the kernel
-Total memory in system: 256 MB
-Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb
-Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004
-Motorola Alaska port (C) 2003 Motorola, Inc.
-CPLD rev 3
-CPLD switches 0x1b
-Set Pin Mux for FEC1
-Set Pin Mux for FEC2
-Alaska Pin Multiplexing:
-Port Configuration Register 0 = 0
-Port Configuration Register 1 = 0
-Port Configuration Register 2 = 0
-Port Configuration Register 3 = 50000000
-Port Configuration Register 3 - PCI = 51400180
-Setup Alaska FPGA PIC:
-Interrupt Enable Register *(u32) = 0
-Interrupt Status Register = 2f0000
-Interrupt Enable Register in_be32 = 0
-Interrupt Status Register = 2f0000
-Interrupt Enable Register in_le32 = 0
-Interrupt Status Register = 2f00
-Interrupt Enable Register readl = 0
-Interrupt Status Register = 2f00
-Interrupt Enable Register = 0
-Interrupt Status Register = 2f0000
-Setup Alaska PCI Controller:
-On node 0 totalpages: 65536
-zone(0): 65536 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: ip=off console=ttyS0,115200
-Using XLB clock (120.00 MHz) to set up decrementer
-Calibrating delay loop... 199.88 BogoMIPS
-Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem)
-Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
-Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
-Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-PCI: (pcibios_init) Global-Hose = 0xc029d000
-Scanning bus 00
-Fixups for bus 00
-Bus scan for 00 returning with max=00
-PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000)
-PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1
-PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing!
-PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88
-PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4
-PCI: (pcibios_init) finished allocating and assigning resources!
-initDma!
-Using 90 DMA buffer descriptors
-descUsed f0023600, descriptors f002360c freeSram f0024140
-unmask SDMA tasks: 0xf0008018 = 0x6f000000
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-Journalled Block Device driver loaded
-JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
-JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
-pty: 256 Unix98 ptys configured
-tracek: Copyright (C) Motorola, 2003.
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-ttyS00 at 0xf1001008 (irq = 73) is a ST16650
-ttyS01 at 0xf1001010 (irq = 74) is a ST16650
-elp-fpanel: Copyright (C) Motorola, 2003.
-fpanel: fpanelWait timeout
-elp-engine: Copyright (C) Motorola, 2003.
-Video disabled due to configuration switch 4
-Alpine 1284 driver: Copyright (C) Motorola, 2003.
-1284 disabled due to configuration switch 5
-Alpine USB driver: Copyright (C) Motorola, 2003.
-OK
-USB: Descriptor download completed OK
-enable_irq(41) unbalanced
-enable_irq(75) unbalanced
-elp-dmaram: Copyright (C) Motorola, 2003.
-Total memory in system: 256 MB
-elp_dmaram: offset is 0x10000000, size is 0
-Xicor NVRAM driver: Copyright (C) Motorola, 2003.
-elp-video: Copyright (C) Motorola, 2003.
-Video disabled due to configuration switch 4
-elp-pfm: Copyright (C) Motorola, 2003.
-paddle: Copyright (C) Motorola, 2001, present.
-RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
-loop: loaded (max 8 devices)
-PPP generic driver version 2.4.2
-PPP Deflate Compression module registered
-Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
-ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
-init_alaska_mtd: chip probing count 0
-cfi_cmdset_0001: Erase suspend on write enabled
-Using buffer write method
-init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes
-ALASKA flash0: Using Static image partition definition
-Creating 3 MTD partitions on "ALASKA0":
-0x00000000-0x00280000 : "kernel"
-0x00280000-0x00fe0000 : "user"
-0x00fe0000-0x01000000 : "signature"
-mgt_fec_module_init
-mgt_fec_init()
-mgt_fec_init
-mgt_init_fec_dev(0xc05f6000,0)
-dev c05f6000 fec_priv c05f6160 fec f0009000
-mgt_init_fec_dev(0xc05f6800,1)
-dev c05f6800 fec_priv c05f6960 fec f0009800
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 2048 buckets, 16Kbytes
-TCP: Hash tables configured (established 16384 bind 32768)
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-RAMDISK: Compressed image found at block 0
-Freeing initrd memory: 1845k freed
-JFFS: Trying to mount a non-mtd device.
-VFS: Mounted root (romfs filesystem) readonly.
-Freeing unused kernel memory: 228k init
-INIT: version 2.78 booting
-INIT: Entering runlevel: 1
-"Space, a great big place of unknown stuff."  -Dexter, for our MotD.
-[01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3
-[01/Jan/1970:00:00:01 +0000] boa: server built Sep  7 2004 at 17:40:55.
-[01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80
-Mounting flash filesystem, will take a minute...
-/etc/rc: line 30: /dev/lp0: No such devish-2.05b#
-sh-2.05b# ifup eth0
-client (v0.9.9-pre) started
-adapter index 2
-adapter hardware address 00:e0:0c:bc:e0:60
-execle'ing /usr/share/udhcpc/default.script
-/sbin/ifconfig eth0
-eth0	  Link encap:Ethernet  HWaddr 00:E0:0C:BC:E0:60
-	  BROADCAST MULTICAST  MTU:1500	 Metric:1
-	 mgt_fec_open
- Rfec request irq
-X fec_open: rcv_ring_size 8, xmt_ring_size 8
-packmgt_fec_open(): call netif_start_queue()
-ets:0 errors:0 dropped:0 overruns:0 frame:0
-	  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-	  collisions:0 txqueuelen:100
-	  RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
-	  Base address:0x9000
-
-/sbin/ifconfig eth0 up
-entering raw listen mode
-Opening raw socket on ifindex 2
-adding option 0x35
-adding option 0x3d
-adding option 0x3c
-Sending discover...
-Waiting on select...
-unrelated/bogus packet
-Waiting on select...
-oooooh!!! got some!
-adding option 0x35
-adding option 0x3d
-adding option 0x3c
-adding option 0x32
-adding option 0x36
-Sending select for 163.12.48.146...
-Waiting on select...
-oooooh!!! got some!
-Waiting on select...
-oooooh!!! got some!
-Lease of 163.12.48.146 obtained, lease time 345600
-execle'ing /usr/share/udhcpc/default.script
-/sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0
-/sbin/ifconfig eth0 up
-deleting routers
-/sbin/route del default
-/sbin/route add default gw 163.12.49.254 dev eth0
-adding dns 163.12.252.230
-adding dns 192.55.22.4
-adding dns 192.5.249.4
-entering none listen mode
-sh-2.05b#
-
-5. REPROGRAM U-BOOT
-===================
-5.1 Reprogram u-boot (boot from AMD)
-    1. Unprotect the boot sector
-    => protect off bank 3
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfff00000 0xfff6ffff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfff00000
-    5. Reset for the new u-boot to take place
-    => reset
-
-5.2 Reprogram u-boot (boot from AMD program at INTEL)
-    1. Unprotect the boot sector
-    => protect off bank 2
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfef00000 0xfefdffff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfef00000
-    5. Reset for the new u-boot to take place
-    => reset
-
-5.3 Reprogram u-boot (boot from INTEL)
-    1. Unprotect the boot sector
-    => protect off bank 4
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfff00000 0xfffdffff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfff00000
-    5. Reset for the new u-boot to take place
-    => reset
-
-5.4 Reprogram u-boot (boot from INTEL program at AMD)
-    1. Unprotect the boot sector
-    => protect off bank 1
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfe080000 0xfe0effff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfe080000
-    5. Reset for the new u-boot to take place
-    => reset