Merge branch 'master' of git://git.denx.de/u-boot-arm

13 files changed, 1410 insertions, 79 deletions

diff --git a/cpu/arm1176/Makefile b/cpu/arm1176/Makefile
new file mode 100644
index 0000000000..1ca9199a64
--- /dev/null
+++ b/cpu/arm1176/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o
+COBJS	= cpu.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm1176/config.mk b/cpu/arm1176/config.mk
new file mode 100644
index 0000000000..5083594253
--- /dev/null
+++ b/cpu/arm1176/config.mk
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v6.
+PLATFORM_CPPFLAGS += -march=armv5t
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
new file mode 100644
index 0000000000..1e94f7d6d0
--- /dev/null
+++ b/cpu/arm1176/cpu.c
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <s3c6400.h>
+
+static void cache_flush (void);
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+	__asm__ __volatile__(
+		"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* Many OMAP regs need at least 2 nops  */
+	for (i = 0; i < 100; i++)
+		__asm__ __volatile__("nop\n");
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1 << 0)	/* mmu off/on */
+#define C1_ALIGN	(1 << 1)	/* alignment faults off/on */
+#define C1_DC		(1 << 2)	/* dcache off/on */
+#define C1_WB		(1 << 3)	/* merging write buffer on/off */
+#define C1_BIG_ENDIAN	(1 << 7)	/* big endian off/on */
+#define C1_SYS_PROT	(1 << 8)	/* system protection */
+#define C1_ROM_PROT	(1 << 9)	/* ROM protection */
+#define C1_IC		(1 << 12)	/* icache off/on */
+#define C1_HIGH_VECTORS	(1 << 13)	/* location of vectors: low/high */
+#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+
+int cpu_init (void)
+{
+	return 0;
+}
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	disable_interrupts ();
+
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
+	cache_flush();
+
+	return 0;
+}
+
+
+/* * reset the cpu by setting up the watchdog timer and let him time out */
+void reset_cpu (ulong ignored)
+{
+	printf("reset... \n\n\n");
+	SW_RST_REG = 0x6400;
+	/* loop forever and wait for reset to happen */
+	while (1) {
+		if (serial_tstc()) {
+			serial_getc();
+			break;
+		}
+	}
+	/*NOTREACHED*/
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	disable_interrupts ();
+	reset_cpu (0);
+	/*NOTREACHED*/
+	return 0;
+}
+
+void icache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();	/* get control reg. */
+	cp_delay ();
+	write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+	return (read_p15_c1 () & C1_IC) != 0;
+}
+
+/* It makes no sense to use the dcache if the MMU is not enabled */
+void dcache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_DC);
+}
+
+void dcache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg & ~C1_DC);
+}
+
+int dcache_status (void)
+{
+	return (read_p15_c1 () & C1_DC) != 0;
+}
+
+/* flush I/D-cache */
+static void cache_flush (void)
+{
+	/* invalidate both caches and flush btb */
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (0));
+	/* mem barrier to sync things */
+	asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0));
+}
diff --git a/cpu/arm1176/s3c64xx/Makefile b/cpu/arm1176/s3c64xx/Makefile
new file mode 100644
index 0000000000..4ab181159a
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+COBJS-y	= interrupts.o
+COBJS-$(CONFIG_S3C6400)	+= cpu_init.o speed.o
+COBJS-$(CONFIG_USB_OHCI_NEW) += usb.o
+
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm1176/s3c64xx/config.mk b/cpu/arm1176/s3c64xx/config.mk
new file mode 100644
index 0000000000..204e880b87
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v6.
+PLATFORM_CPPFLAGS += -march=armv5t
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm1176/s3c64xx/cpu_init.S b/cpu/arm1176/s3c64xx/cpu_init.S
new file mode 100644
index 0000000000..08bda99fdc
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/cpu_init.S
@@ -0,0 +1,142 @@
+/*
+ * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400
+ *
+ * Copyright (C) 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <s3c6400.h>
+
+	.globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+	/* Memory subsystem address 0x7e00f120 */
+	ldr	r0, =ELFIN_MEM_SYS_CFG
+
+	/* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
+	mov	r1, #0xd
+	str	r1, [r0]
+
+	/* DMC1 base address 0x7e001000 */
+	ldr	r0, =ELFIN_DMC1_BASE
+
+	ldr	r1, =0x4
+	str	r1, [r0, #INDEX_DMC_MEMC_CMD]
+
+	ldr	r1, =DMC_DDR_REFRESH_PRD
+	str	r1, [r0, #INDEX_DMC_REFRESH_PRD]
+
+	ldr	r1, =DMC_DDR_CAS_LATENCY
+	str	r1, [r0, #INDEX_DMC_CAS_LATENCY]
+
+	ldr	r1, =DMC_DDR_t_DQSS
+	str	r1, [r0, #INDEX_DMC_T_DQSS]
+
+	ldr	r1, =DMC_DDR_t_MRD
+	str	r1, [r0, #INDEX_DMC_T_MRD]
+
+	ldr	r1, =DMC_DDR_t_RAS
+	str	r1, [r0, #INDEX_DMC_T_RAS]
+
+	ldr	r1, =DMC_DDR_t_RC
+	str	r1, [r0, #INDEX_DMC_T_RC]
+
+	ldr	r1, =DMC_DDR_t_RCD
+	ldr	r2, =DMC_DDR_schedule_RCD
+	orr	r1, r1, r2
+	str	r1, [r0, #INDEX_DMC_T_RCD]
+
+	ldr	r1, =DMC_DDR_t_RFC
+	ldr	r2, =DMC_DDR_schedule_RFC
+	orr	r1, r1, r2
+	str	r1, [r0, #INDEX_DMC_T_RFC]
+
+	ldr	r1, =DMC_DDR_t_RP
+	ldr	r2, =DMC_DDR_schedule_RP
+	orr	r1, r1, r2
+	str	r1, [r0, #INDEX_DMC_T_RP]
+
+	ldr	r1, =DMC_DDR_t_RRD
+	str	r1, [r0, #INDEX_DMC_T_RRD]
+
+	ldr	r1, =DMC_DDR_t_WR
+	str	r1, [r0, #INDEX_DMC_T_WR]
+
+	ldr	r1, =DMC_DDR_t_WTR
+	str	r1, [r0, #INDEX_DMC_T_WTR]
+
+	ldr	r1, =DMC_DDR_t_XP
+	str	r1, [r0, #INDEX_DMC_T_XP]
+
+	ldr	r1, =DMC_DDR_t_XSR
+	str	r1, [r0, #INDEX_DMC_T_XSR]
+
+	ldr	r1, =DMC_DDR_t_ESR
+	str	r1, [r0, #INDEX_DMC_T_ESR]
+
+	ldr	r1, =DMC1_MEM_CFG
+	str	r1, [r0, #INDEX_DMC_MEMORY_CFG]
+
+	ldr	r1, =DMC1_MEM_CFG2
+	str	r1, [r0, #INDEX_DMC_MEMORY_CFG2]
+
+	ldr	r1, =DMC1_CHIP0_CFG
+	str	r1, [r0, #INDEX_DMC_CHIP_0_CFG]
+
+	ldr	r1, =DMC_DDR_32_CFG
+	str	r1, [r0, #INDEX_DMC_USER_CONFIG]
+
+	/* DMC0 DDR Chip 0 configuration direct command reg */
+	ldr	r1, =DMC_NOP0
+	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+	/* Precharge All */
+	ldr	r1, =DMC_PA0
+	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+	/* Auto Refresh 2 time */
+	ldr	r1, =DMC_AR0
+	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
+	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+	/* MRS */
+	ldr	r1, =DMC_mDDR_EMR0
+	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+	/* Mode Reg */
+	ldr	r1, =DMC_mDDR_MR0
+	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+	/* Enable DMC1 */
+	mov	r1, #0x0
+	str	r1, [r0, #INDEX_DMC_MEMC_CMD]
+
+check_dmc1_ready:
+	ldr	r1, [r0, #INDEX_DMC_MEMC_STATUS]
+	mov	r2, #0x3
+	and	r1, r1, r2
+	cmp	r1, #0x1
+	bne	check_dmc1_ready
+	nop
+
+	mov	pc, lr
+
+	.ltorg
diff --git a/cpu/arm1176/s3c64xx/interrupts.c b/cpu/arm1176/s3c64xx/interrupts.c
new file mode 100644
index 0000000000..8356ae49e4
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/interrupts.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/proc-armv/ptrace.h>
+#include <s3c6400.h>
+
+static ulong timer_load_val;
+
+#define PRESCALER	167
+
+static s3c64xx_timers *s3c64xx_get_base_timers(void)
+{
+	return (s3c64xx_timers *)ELFIN_TIMER_BASE;
+}
+
+/* macro to read the 16 bit timer */
+static inline ulong read_timer(void)
+{
+	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
+
+	return timers->TCNTO4;
+}
+
+/* Internal tick units */
+/* Last decremneter snapshot */
+static unsigned long lastdec;
+/* Monotonic incrementing timer */
+static unsigned long long timestamp;
+
+int interrupt_init(void)
+{
+	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
+
+	/* use PWM Timer 4 because it has no output */
+	/*
+	 * We use the following scheme for the timer:
+	 * Prescaler is hard fixed at 167, divider at 1/4.
+	 * This gives at PCLK frequency 66MHz approx. 10us ticks
+	 * The timer is set to wrap after 100s, at 66MHz this obviously
+	 * happens after 10,000,000 ticks. A long variable can thus
+	 * keep values up to 40,000s, i.e., 11 hours. This should be
+	 * enough for most uses:-) Possible optimizations: select a
+	 * binary-friendly frequency, e.g., 1ms / 128. Also calculate
+	 * the prescaler automatically for other PCLK frequencies.
+	 */
+	timers->TCFG0 = PRESCALER << 8;
+	if (timer_load_val == 0) {
+		timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */
+		timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000;
+	}
+
+	/* load value for 10 ms timeout */
+	lastdec = timers->TCNTB4 = timer_load_val;
+	/* auto load, manual update of Timer 4 */
+	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO |
+		TCON_4_UPDATE;
+
+	/* auto load, start Timer 4 */
+	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON;
+	timestamp = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	ulong now = read_timer();
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += lastdec - now;
+	} else {
+		/* we have an overflow ... */
+		timestamp += lastdec + timer_load_val - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	/* We overrun in 100s */
+	return (ulong)(timer_load_val / 100);
+}
+
+void reset_timer_masked(void)
+{
+	/* reset time */
+	lastdec = read_timer();
+	timestamp = 0;
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+ulong get_timer_masked(void)
+{
+	return get_ticks() / (timer_load_val / (100 * CFG_HZ));
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+	timestamp = t * (timer_load_val / (100 * CFG_HZ));
+}
+
+void udelay(unsigned long usec)
+{
+	unsigned long long tmp;
+	ulong tmo;
+
+	tmo = (usec + 9) / 10;
+	tmp = get_ticks() + tmo;	/* get current timestamp */
+
+	while (get_ticks() < tmp)/* loop till event */
+		 /*NOP*/;
+}
diff --git a/cpu/arm1176/s3c64xx/speed.c b/cpu/arm1176/s3c64xx/speed.c
new file mode 100644
index 0000000000..5c335a55a9
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/speed.c
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This code should work for both the S3C2400 and the S3C2410
+ * as they seem to have the same PLL and clock machinery inside.
+ * The different address mapping is handled by the s3c24xx.h files below.
+ */
+
+#include <common.h>
+#include <s3c6400.h>
+
+#define APLL 0
+#define MPLL 1
+#define EPLL 2
+
+/* ------------------------------------------------------------------------- */
+/*
+ * NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+static ulong get_PLLCLK(int pllreg)
+{
+	ulong r, m, p, s;
+
+	switch (pllreg) {
+	case APLL:
+		r = APLL_CON_REG;
+		break;
+	case MPLL:
+		r = MPLL_CON_REG;
+		break;
+	case EPLL:
+		r = EPLL_CON0_REG;
+		break;
+	default:
+		hang();
+	}
+
+	m = (r >> 16) & 0x3ff;
+	p = (r >> 8) & 0x3f;
+	s = r & 0x7;
+
+	return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s)));
+}
+
+/* return ARMCORE frequency */
+ulong get_ARMCLK(void)
+{
+	ulong div;
+
+	div = CLK_DIV0_REG;
+
+	return get_PLLCLK(APLL) / ((div & 0x7) + 1);
+}
+
+/* return FCLK frequency */
+ulong get_FCLK(void)
+{
+	return get_PLLCLK(APLL);
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+	ulong fclk;
+
+	uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
+	uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1;
+
+	/*
+	 * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on
+	 * s3c6400 and is always 0, and it is indeed running in ASYNC mode
+	 */
+	if (OTHERS_REG & 0x80)
+		fclk = get_FCLK();		/* SYNC Mode	*/
+	else
+		fclk = get_PLLCLK(MPLL);	/* ASYNC Mode	*/
+
+	return fclk / (hclk_div * hclkx2_div);
+}
+
+/* return PCLK frequency */
+ulong get_PCLK(void)
+{
+	ulong fclk;
+	uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
+	uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1;
+
+	if (OTHERS_REG & 0x80)
+		fclk = get_FCLK();		/* SYNC Mode	*/
+	else
+		fclk = get_PLLCLK(MPLL);	/* ASYNC Mode	*/
+
+	return fclk / (hclkx2_div * pre_div);
+}
+
+/* return UCLK frequency */
+ulong get_UCLK(void)
+{
+	return get_PLLCLK(EPLL);
+}
+
+int print_cpuinfo(void)
+{
+	printf("\nCPU:     S3C6400@%luMHz\n", get_ARMCLK() / 1000000);
+	printf("         Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ",
+	       get_FCLK() / 1000000, get_HCLK() / 1000000,
+	       get_PCLK() / 1000000);
+
+	if (OTHERS_REG & 0x80)
+		printf("(SYNC Mode) \n");
+	else
+		printf("(ASYNC Mode) \n");
+	return 0;
+}
diff --git a/cpu/arm1176/s3c64xx/usb.c b/cpu/arm1176/s3c64xx/usb.c
new file mode 100644
index 0000000000..274a4ed309
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/usb.c
@@ -0,0 +1,45 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) initialization for USB on the S3C64XX.
+ *
+ * Copyright (C) 2008,
+ * Guennadi Liakhovetski, DENX Software Engineering <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <s3c6400.h>
+
+int usb_cpu_init(void)
+{
+	OTHERS_REG |= 0x10000;
+	return 0;
+}
+
+int usb_cpu_stop(void)
+{
+	OTHERS_REG &= ~0x10000;
+	return 0;
+}
+
+void usb_cpu_init_fail(void)
+{
+	OTHERS_REG &= ~0x10000;
+}
diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
new file mode 100644
index 0000000000..991277f1c7
--- /dev/null
+++ b/cpu/arm1176/start.S
@@ -0,0 +1,469 @@
+/*
+ *  armboot - Startup Code for S3C6400/ARM1176 CPU-core
+ *
+ * Copyright (c) 2007	Samsung Electronics
+ *
+ * Copyright (C) 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com)
+ * 2007-09-21 - Added MoviNAND and OneNAND boot codes by
+ * jsgood (jsgood.yang@samsung.com)
+ * Base codes by scsuh (sc.suh)
+ */
+
+#include <config.h>
+#include <version.h>
+#ifdef CONFIG_ENABLE_MMU
+#include <asm/proc/domain.h>
+#endif
+#include <s3c6400.h>
+
+#if !defined(CONFIG_ENABLE_MMU) && !defined(CFG_PHY_UBOOT_BASE)
+#define CFG_PHY_UBOOT_BASE	CFG_UBOOT_BASE
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+.globl _start
+_start: b	reset
+#ifndef CONFIG_NAND_SPL
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:
+	.word undefined_instruction
+_software_interrupt:
+	.word software_interrupt
+_prefetch_abort:
+	.word prefetch_abort
+_data_abort:
+	.word data_abort
+_not_used:
+	.word not_used
+_irq:
+	.word irq
+_fiq:
+	.word fiq
+_pad:
+	.word 0x12345678 /* now 16*4=64 */
+#else
+	. = _start + 64
+#endif
+
+.global _end_vect
+_end_vect:
+	.balignl 16,0xdeadbeef
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+/*
+ * Below variable is very important because we use MMU in U-Boot.
+ * Without it, we cannot run code correctly before MMU is ON.
+ * by scsuh.
+ */
+_TEXT_PHY_BASE:
+	.word	CFG_PHY_UBOOT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+	.word __bss_start
+
+.globl _bss_end
+_bss_end:
+	.word _end
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0, cpsr
+	bic	r0, r0, #0x3f
+	orr	r0, r0, #0xd3
+	msr	cpsr, r0
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+cpu_init_crit:
+	/*
+	 * When booting from NAND - it has definitely been a reset, so, no need
+	 * to flush caches and disable the MMU
+	 */
+#ifndef CONFIG_NAND_SPL
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	/* Prepare to disable the MMU */
+	adr	r1, mmu_disable_phys
+	/* We presume we're within the first 1024 bytes */
+	and	r1, r1, #0x3fc
+	ldr	r2, _TEXT_PHY_BASE
+	ldr	r3, =0xfff00000
+	and	r2, r2, r3
+	orr	r2, r2, r1
+	b	mmu_disable
+
+	.align 5
+	/* Run in a single cache-line */
+mmu_disable:
+	mcr	p15, 0, r0, c1, c0, 0
+	nop
+	nop
+	mov	pc, r2
+#endif
+
+mmu_disable_phys:
+	/* Peri port setup */
+	ldr	r0, =0x70000000
+	orr	r0, r0, #0x13
+	mcr	p15,0,r0,c15,c2,4       @ 256M (0x70000000 - 0x7fffffff)
+
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	bl	lowlevel_init		/* go setup pll,mux,memory */
+
+after_copy:
+#ifdef CONFIG_ENABLE_MMU
+enable_mmu:
+	/* enable domain access */
+	ldr	r5, =0x0000ffff
+	mcr	p15, 0, r5, c3, c0, 0	/* load domain access register */
+
+	/* Set the TTB register */
+	ldr	r0, _mmu_table_base
+	ldr	r1, =CFG_PHY_UBOOT_BASE
+	ldr	r2, =0xfff00000
+	bic	r0, r0, r2
+	orr	r1, r0, r1
+	mcr	p15, 0, r1, c2, c0, 0
+
+	/* Enable the MMU */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #1		/* Set CR_M to enable MMU */
+
+	/* Prepare to enable the MMU */
+	adr	r1, skip_hw_init
+	and	r1, r1, #0x3fc
+	ldr	r2, _TEXT_BASE
+	ldr	r3, =0xfff00000
+	and	r2, r2, r3
+	orr	r2, r2, r1
+	b	mmu_enable
+
+	.align 5
+	/* Run in a single cache-line */
+mmu_enable:
+
+	mcr	p15, 0, r0, c1, c0, 0
+	nop
+	nop
+	mov	pc, r2
+#endif
+
+skip_hw_init:
+	/* Set up the stack						    */
+stack_setup:
+#ifdef CONFIG_MEMORY_UPPER_CODE
+	ldr	sp, =(CFG_UBOOT_BASE + CFG_UBOOT_SIZE - 0xc)
+#else
+	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
+	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+
+#endif
+
+clear_bss:
+	ldr	r0, _bss_start		/* find start of bss segment        */
+	ldr	r1, _bss_end		/* stop here                        */
+	mov 	r2, #0			/* clear                            */
+
+clbss_l:
+	str	r2, [r0]		/* clear loop...                    */
+	add	r0, r0, #4
+	cmp	r0, r1
+	ble	clbss_l
+
+#ifndef CONFIG_NAND_SPL
+	ldr	pc, _start_armboot
+
+_start_armboot:
+	.word start_armboot
+#else
+	b	nand_boot
+/*	.word nand_boot*/
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+_mmu_table_base:
+	.word mmu_table
+#endif
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * we assume that cache operation is done before. (eg. cleanup_before_linux())
+ * actually, we don't need to do anything about cache if not use d-cache in
+ * U-Boot. So, in this function we clean only MMU. by scsuh
+ *
+ * void	theLastJump(void *kernel, int arch_num, uint boot_params);
+ */
+#ifdef CONFIG_ENABLE_MMU
+	.globl theLastJump
+theLastJump:
+	mov	r9, r0
+	ldr	r3, =0xfff00000
+	ldr	r4, _TEXT_PHY_BASE
+	adr	r5, phy_last_jump
+	bic	r5, r5, r3
+	orr	r5, r5, r4
+	mov	pc, r5
+phy_last_jump:
+	/*
+	 * disable MMU stuff
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
+	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
+	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	mov	r0, #0
+	mov	pc, r9
+#endif
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ */
+
+	.macro	bad_save_user_regs
+	/* carve out a frame on current user stack */
+	sub	sp, sp, #S_FRAME_SIZE
+	/* Save user registers (now in svc mode) r0-r12 */
+	stmia	sp, {r0 - r12}
+
+	ldr	r2, _armboot_start
+	sub	r2, r2, #(CFG_MALLOC_LEN)
+	/* set base 2 words into abort stack */
+	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)
+	/* get values for "aborted" pc and cpsr (into parm regs) */
+	ldmia	r2, {r2 - r3}
+	/* grab pointer to old stack */
+	add	r0, sp, #S_FRAME_SIZE
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	/* save sp_SVC, lr_SVC, pc, cpsr */
+	stmia	r5, {r0 - r3}
+	/* save current stack into r0 (param register) */
+	mov	r0, sp
+	.endm
+
+	.macro get_bad_stack
+	/* setup our mode stack (enter in banked mode) */
+	ldr	r13, _armboot_start
+	/* move past malloc pool */
+	sub	r13, r13, #(CFG_MALLOC_LEN)
+	/* move to reserved a couple spots for abort stack */
+	sub	r13, r13, #(CFG_GBL_DATA_SIZE + 8)
+
+	/* save caller lr in position 0 of saved stack */
+	str	lr, [r13]
+	/* get the spsr */
+	mrs	lr, spsr
+	/* save spsr in position 1 of saved stack */
+	str	lr, [r13, #4]
+
+	/* prepare SVC-Mode */
+	mov	r13, #MODE_SVC
+	@ msr	spsr_c, r13
+	/* switch modes, make sure moves will execute */
+	msr	spsr, r13
+	/* capture return pc */
+	mov	lr, pc
+	/* jump to next instruction & switch modes. */
+	movs	pc, lr
+	.endm
+
+	.macro get_bad_stack_swi
+	/* space on current stack for scratch reg. */
+	sub	r13, r13, #4
+	/* save R0's value. */
+	str	r0, [r13]
+	/* get data regions start */
+	ldr	r0, _armboot_start
+	/* move past malloc pool */
+	sub	r0, r0, #(CFG_MALLOC_LEN)
+	/* move past gbl and a couple spots for abort stack */
+	sub	r0, r0, #(CFG_GBL_DATA_SIZE + 8)
+	/* save caller lr in position 0 of saved stack */
+	str	lr, [r0]
+	/* get the spsr */
+	mrs	r0, spsr
+	/* save spsr in position 1 of saved stack */
+	str	lr, [r0, #4]
+	/* restore r0 */
+	ldr	r0, [r13]
+	/* pop stack entry */
+	add	r13, r13, #4
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align	5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack_swi
+	bad_save_user_regs
+	bl	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_not_used
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_fiq
+#endif /* CONFIG_NAND_SPL */
diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
index 2aa9ef128b..59f039b7c3 100644
--- a/cpu/arm926ejs/davinci/dp83848.c
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -38,9 +38,9 @@ int dp83848_is_phy_connected(int phy_addr)
 {
 	u_int16_t	id1, id2;
 
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
 		return(0);
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
 		return(0);
 
 	if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
@@ -54,13 +54,13 @@ int dp83848_get_link_speed(int phy_addr)
 	u_int16_t		tmp;
 	volatile emac_regs*	emac = (emac_regs *)EMAC_BASE_ADDR;
 
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
 		return(0);
 
 	if (!(tmp & DP83848_LINK_STATUS))	/* link up? */
 		return(0);
 
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
 		return(0);
 
 	/* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -101,7 +101,7 @@ int dp83848_init_phy(int phy_addr)
 	}
 
 	/* Disable PHY Interrupts */
-	dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
+	davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
 
 	return(ret);
 }
@@ -112,13 +112,13 @@ int dp83848_auto_negotiate(int phy_addr)
 	u_int16_t	tmp;
 
 
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
 		return(0);
 
 	/* Restart Auto_negotiation  */
 	tmp &= ~DP83848_AUTONEG;	/* remove autonegotiation enable */
 	tmp |= DP83848_ISOLATE;		/* Electrically isolate PHY */
-	dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
 
 	/* Set the Auto_negotiation Advertisement Register
 	 * MII advertising for Next page, 100BaseTxFD and HD,
@@ -126,23 +126,23 @@ int dp83848_auto_negotiate(int phy_addr)
 	 */
 	tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
 		DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
-	dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
+	davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
 
 
 	/* Read Control Register */
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
 		return(0);
 
 	tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
-	dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
 
 	/* Restart Auto_negotiation  */
 	tmp |= DP83848_RESTART_AUTONEG;
-	dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
 
 	/*check AutoNegotiate complete */
 	udelay(10000);
-	if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
 		return(0);
 
 	if (!(tmp & DP83848_AUTONEG_COMP))
diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
index 5ae035b986..f6f81df6ca 100644
--- a/cpu/arm926ejs/davinci/ether.c
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -50,12 +50,12 @@ unsigned int	emac_dbg = 0;
 #define debug_emac(fmt,args...)	if (emac_dbg) printf(fmt,##args)
 
 /* Internal static functions */
-static int dm644x_eth_hw_init (void);
-static int dm644x_eth_open (void);
-static int dm644x_eth_close (void);
-static int dm644x_eth_send_packet (volatile void *packet, int length);
-static int dm644x_eth_rcv_packet (void);
-static void dm644x_eth_mdio_enable(void);
+static int davinci_eth_hw_init (void);
+static int davinci_eth_open (void);
+static int davinci_eth_close (void);
+static int davinci_eth_send_packet (volatile void *packet, int length);
+static int davinci_eth_rcv_packet (void);
+static void davinci_eth_mdio_enable(void);
 
 static int gen_init_phy(int phy_addr);
 static int gen_is_phy_connected(int phy_addr);
@@ -65,48 +65,48 @@ static int gen_auto_negotiate(int phy_addr);
 /* Wrappers exported to the U-Boot proper */
 int eth_hw_init(void)
 {
-	return(dm644x_eth_hw_init());
+	return(davinci_eth_hw_init());
 }
 
 int eth_init(bd_t * bd)
 {
-	return(dm644x_eth_open());
+	return(davinci_eth_open());
 }
 
 void eth_halt(void)
 {
-	dm644x_eth_close();
+	davinci_eth_close();
 }
 
 int eth_send(volatile void *packet, int length)
 {
-	return(dm644x_eth_send_packet(packet, length));
+	return(davinci_eth_send_packet(packet, length));
 }
 
 int eth_rx(void)
 {
-	return(dm644x_eth_rcv_packet());
+	return(davinci_eth_rcv_packet());
 }
 
 void eth_mdio_enable(void)
 {
-	dm644x_eth_mdio_enable();
+	davinci_eth_mdio_enable();
 }
 /* End of wrappers */
 
 
-static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 
 /*
  * This function must be called before emac_open() if you want to override
  * the default mac address.
  */
-void dm644x_eth_set_mac_addr(const u_int8_t *addr)
+void davinci_eth_set_mac_addr(const u_int8_t *addr)
 {
 	int i;
 
-	for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) {
-		dm644x_eth_mac_addr[i] = addr[i];
+	for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
+		davinci_eth_mac_addr[i] = addr[i];
 	}
 }
 
@@ -130,7 +130,7 @@ static volatile u_int8_t	active_phy_addr = 0xff;
 
 phy_t				phy;
 
-static void dm644x_eth_mdio_enable(void)
+static void davinci_eth_mdio_enable(void)
 {
 	u_int32_t	clkdiv;
 
@@ -149,7 +149,7 @@ static void dm644x_eth_mdio_enable(void)
  * If no active PHY (or more than one PHY) found returns 0.
  * Sets active_phy_addr variable.
  */
-static int dm644x_eth_phy_detect(void)
+static int davinci_eth_phy_detect(void)
 {
 	u_int32_t	phy_act_state;
 	int		i;
@@ -159,7 +159,7 @@ static int dm644x_eth_phy_detect(void)
 	if ((phy_act_state = adap_mdio->ALIVE) == 0)
 		return(0);				/* No active PHYs */
 
-	debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
+	debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
 
 	for (i = 0; i < 32; i++) {
 		if (phy_act_state & (1 << i)) {
@@ -177,7 +177,7 @@ static int dm644x_eth_phy_detect(void)
 
 
 /* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
-int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
 {
 	int	tmp;
 
@@ -201,7 +201,7 @@ int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
 }
 
 /* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
-int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
 {
 
 	while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
@@ -235,14 +235,14 @@ static int gen_is_phy_connected(int phy_addr)
 {
 	u_int16_t	dummy;
 
-	return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+	return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
 }
 
 static int gen_get_link_speed(int phy_addr)
 {
 	u_int16_t	tmp;
 
-	if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+	if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
 		return(1);
 
 	return(0);
@@ -252,16 +252,16 @@ static int gen_auto_negotiate(int phy_addr)
 {
 	u_int16_t	tmp;
 
-	if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
 		return(0);
 
 	/* Restart Auto_negotiation  */
 	tmp |= PHY_BMCR_AUTON;
-	dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+	davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
 
 	/*check AutoNegotiate complete */
 	udelay (10000);
-	if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
 		return(0);
 
 	if (!(tmp & PHY_BMSR_AUTN_COMP))
@@ -273,19 +273,19 @@ static int gen_auto_negotiate(int phy_addr)
 
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
+static int davinci_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
 {
-	return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);
+	return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1);
 }
 
-static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
+static int davinci_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
 {
-	return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1);
+	return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1);
 }
 
-int dm644x_eth_miiphy_initialize(bd_t *bis)
+int davinci_eth_miiphy_initialize(bd_t *bis)
 {
-	miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write);
+	miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write);
 
 	return(1);
 }
@@ -296,13 +296,13 @@ int dm644x_eth_miiphy_initialize(bd_t *bis)
  * EMAC modules power or pin multiplexors, that is done by board_init()
  * much earlier in bootup process. Returns 1 on success, 0 otherwise.
  */
-static int dm644x_eth_hw_init(void)
+static int davinci_eth_hw_init(void)
 {
 	u_int32_t	phy_id;
 	u_int16_t	tmp;
 	int		i;
 
-	dm644x_eth_mdio_enable();
+	davinci_eth_mdio_enable();
 
 	for (i = 0; i < 256; i++) {
 		if (adap_mdio->ALIVE)
@@ -316,18 +316,18 @@ static int dm644x_eth_hw_init(void)
 	}
 
 	/* Find if a PHY is connected and get it's address */
-	if (!dm644x_eth_phy_detect())
+	if (!davinci_eth_phy_detect())
 		return(0);
 
 	/* Get PHY ID and initialize phy_ops for a detected PHY */
-	if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+	if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
 		active_phy_addr = 0xff;
 		return(0);
 	}
 
 	phy_id = (tmp << 16) & 0xffff0000;
 
-	if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+	if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
 		active_phy_addr = 0xff;
 		return(0);
 	}
@@ -364,7 +364,7 @@ static int dm644x_eth_hw_init(void)
 
 
 /* Eth device open */
-static int dm644x_eth_open(void)
+static int davinci_eth_open(void)
 {
 	dv_reg_p		addr;
 	u_int32_t		clkdiv, cnt;
@@ -389,26 +389,26 @@ static int dm644x_eth_open(void)
 	/* Using channel 0 only - other channels are disabled */
 	adap_emac->MACINDEX = 0;
 	adap_emac->MACADDRHI =
-		(dm644x_eth_mac_addr[3] << 24) |
-		(dm644x_eth_mac_addr[2] << 16) |
-		(dm644x_eth_mac_addr[1] << 8)  |
-		(dm644x_eth_mac_addr[0]);
+		(davinci_eth_mac_addr[3] << 24) |
+		(davinci_eth_mac_addr[2] << 16) |
+		(davinci_eth_mac_addr[1] << 8)  |
+		(davinci_eth_mac_addr[0]);
 	adap_emac->MACADDRLO =
-		(dm644x_eth_mac_addr[5] << 8) |
-		(dm644x_eth_mac_addr[4]);
+		(davinci_eth_mac_addr[5] << 8) |
+		(davinci_eth_mac_addr[4]);
 
 	adap_emac->MACHASH1 = 0;
 	adap_emac->MACHASH2 = 0;
 
 	/* Set source MAC address - REQUIRED */
 	adap_emac->MACSRCADDRHI =
-		(dm644x_eth_mac_addr[3] << 24) |
-		(dm644x_eth_mac_addr[2] << 16) |
-		(dm644x_eth_mac_addr[1] << 8)  |
-		(dm644x_eth_mac_addr[0]);
+		(davinci_eth_mac_addr[3] << 24) |
+		(davinci_eth_mac_addr[2] << 16) |
+		(davinci_eth_mac_addr[1] << 8)  |
+		(davinci_eth_mac_addr[0]);
 	adap_emac->MACSRCADDRLO =
-		(dm644x_eth_mac_addr[4] << 8) |
-		(dm644x_eth_mac_addr[5]);
+		(davinci_eth_mac_addr[4] << 8) |
+		(davinci_eth_mac_addr[5]);
 
 	/* Set DMA 8 TX / 8 RX Head pointers to 0 */
 	addr = &adap_emac->TX0HDP;
@@ -473,7 +473,7 @@ static int dm644x_eth_open(void)
 }
 
 /* EMAC Channel Teardown */
-static void dm644x_eth_ch_teardown(int ch)
+static void davinci_eth_ch_teardown(int ch)
 {
 	dv_reg		dly = 0xff;
 	dv_reg		cnt;
@@ -516,12 +516,12 @@ static void dm644x_eth_ch_teardown(int ch)
 }
 
 /* Eth device close */
-static int dm644x_eth_close(void)
+static int davinci_eth_close(void)
 {
 	debug_emac("+ emac_close\n");
 
-	dm644x_eth_ch_teardown(EMAC_CH_TX);	/* TX Channel teardown */
-	dm644x_eth_ch_teardown(EMAC_CH_RX);	/* RX Channel teardown */
+	davinci_eth_ch_teardown(EMAC_CH_TX);	/* TX Channel teardown */
+	davinci_eth_ch_teardown(EMAC_CH_RX);	/* RX Channel teardown */
 
 	/* Reset EMAC module and disable interrupts in wrapper */
 	adap_emac->SOFTRESET = 1;
@@ -537,7 +537,7 @@ static int tx_send_loop = 0;
  * This function sends a single packet on the network and returns
  * positive number (number of bytes transmitted) or negative for error
  */
-static int dm644x_eth_send_packet (volatile void *packet, int length)
+static int davinci_eth_send_packet (volatile void *packet, int length)
 {
 	int ret_status = -1;
 
@@ -568,7 +568,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
 	/* Wait for packet to complete or link down */
 	while (1) {
 		if (!phy.get_link_speed (active_phy_addr)) {
-			dm644x_eth_ch_teardown (EMAC_CH_TX);
+			davinci_eth_ch_teardown (EMAC_CH_TX);
 			return (ret_status);
 		}
 		if (adap_emac->TXINTSTATRAW & 0x01) {
@@ -584,7 +584,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
 /*
  * This function handles receipt of a packet from the network
  */
-static int dm644x_eth_rcv_packet (void)
+static int davinci_eth_rcv_packet (void)
 {
 	volatile emac_desc *rx_curr_desc;
 	volatile emac_desc *curr_desc;
diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c
index 8130b48de0..ce3e41c551 100644
--- a/cpu/arm926ejs/davinci/lxt972.c
+++ b/cpu/arm926ejs/davinci/lxt972.c
@@ -39,9 +39,9 @@ int lxt972_is_phy_connected(int phy_addr)
 {
 	u_int16_t id1, id2;
 
-	if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
+	if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
 		return(0);
-	if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
+	if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
 		return(0);
 
 	if ((id1 == (0x0013)) && ((id2  & 0xfff0) == 0x78e0))
@@ -55,20 +55,20 @@ int lxt972_get_link_speed(int phy_addr)
 	u_int16_t stat1, tmp;
 	volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
 
-	if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
+	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
 		return(0);
 
 	if (!(stat1 & PHY_LXT971_STAT2_LINK))	/* link up? */
 		return(0);
 
-	if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
 		return(0);
 
 	tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
 
-	dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
+	davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
 	/* Read back */
-	if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
 		return(0);
 
 	/* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -95,7 +95,7 @@ int lxt972_init_phy(int phy_addr)
 	}
 
 	/* Disable PHY Interrupts */
-	dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
+	davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
 
 	return(ret);
 }
@@ -105,16 +105,16 @@ int lxt972_auto_negotiate(int phy_addr)
 {
 	u_int16_t tmp;
 
-	if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
 		return(0);
 
 	/* Restart Auto_negotiation  */
 	tmp |= PHY_BMCR_RST_NEG;
-	dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+	davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
 
 	/*check AutoNegotiate complete */
 	udelay (10000);
-	if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+	if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
 		return(0);
 
 	if (!(tmp & PHY_BMSR_AUTN_COMP))