Merge branch 'mimc200'

10 files changed, 432 insertions, 321 deletions

diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
index 33dc427681..e08f27383d 100644
--- a/cpu/at32ap/Makefile
+++ b/cpu/at32ap/Makefile
@@ -34,7 +34,8 @@ COBJS-y			+= hsdramc.o
 COBJS-y			+= exception.o
 COBJS-y			+= cache.o
 COBJS-y			+= interrupts.o
-COBJS-y			+= pio.o
+COBJS-$(CONFIG_PORTMUX_PIO) += portmux-pio.o
+COBJS-$(CONFIG_PORTMUX_GPIO) += portmux-gpio.o
 
 SRCS	:= $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
index 740423563e..46e6ef661a 100644
--- a/cpu/at32ap/at32ap700x/Makefile
+++ b/cpu/at32ap/at32ap700x/Makefile
@@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)lib$(SOC).a
 
-COBJS	:= gpio.o clk.o
+COBJS	:= portmux.o clk.o
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
index 2b1cd36bfb..2c2e19c296 100644
--- a/cpu/at32ap/at32ap700x/clk.c
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -25,6 +25,7 @@
 
 #include <asm/arch/clk.h>
 #include <asm/arch/memory-map.h>
+#include <asm/arch/portmux.h>
 
 #include "sm.h"
 
@@ -66,3 +67,27 @@ void clk_init(void)
 	sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
 #endif
 }
+
+unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
+		unsigned long rate, unsigned long parent_rate)
+{
+	unsigned long divider;
+
+	if (rate == 0 || parent_rate == 0) {
+		sm_writel(PM_GCCTRL(id), 0);
+		return 0;
+	}
+
+	divider = (parent_rate + rate / 2) / rate;
+	if (divider <= 1) {
+		sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
+		rate = parent_rate;
+	} else {
+		divider = min(255, divider / 2 - 1);
+		sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
+				| SM_BF(DIV, divider));
+		rate = parent_rate / (2 * (divider + 1));
+	}
+
+	return rate;
+}
diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
deleted file mode 100644
index 91bb636592..0000000000
--- a/cpu/at32ap/at32ap700x/gpio.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/memory-map.h>
-
-/*
- * Lots of small functions here. We depend on --gc-sections getting
- * rid of the ones we don't need.
- */
-void gpio_enable_ebi(void)
-{
-#ifdef CONFIG_SYS_HSDRAMC
-#ifndef CONFIG_SYS_SDRAM_16BIT
-	gpio_select_periph_A(GPIO_PIN_PE0, 0);
-	gpio_select_periph_A(GPIO_PIN_PE1, 0);
-	gpio_select_periph_A(GPIO_PIN_PE2, 0);
-	gpio_select_periph_A(GPIO_PIN_PE3, 0);
-	gpio_select_periph_A(GPIO_PIN_PE4, 0);
-	gpio_select_periph_A(GPIO_PIN_PE5, 0);
-	gpio_select_periph_A(GPIO_PIN_PE6, 0);
-	gpio_select_periph_A(GPIO_PIN_PE7, 0);
-	gpio_select_periph_A(GPIO_PIN_PE8, 0);
-	gpio_select_periph_A(GPIO_PIN_PE9, 0);
-	gpio_select_periph_A(GPIO_PIN_PE10, 0);
-	gpio_select_periph_A(GPIO_PIN_PE11, 0);
-	gpio_select_periph_A(GPIO_PIN_PE12, 0);
-	gpio_select_periph_A(GPIO_PIN_PE13, 0);
-	gpio_select_periph_A(GPIO_PIN_PE14, 0);
-	gpio_select_periph_A(GPIO_PIN_PE15, 0);
-#endif
-	gpio_select_periph_A(GPIO_PIN_PE26, 0);
-#endif
-}
-
-#ifdef AT32AP700x_CHIP_HAS_USART
-void gpio_enable_usart0(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PA8, 0);
-	gpio_select_periph_B(GPIO_PIN_PA9, 0);
-}
-
-void gpio_enable_usart1(void)
-{
-	gpio_select_periph_A(GPIO_PIN_PA17, 0);
-	gpio_select_periph_A(GPIO_PIN_PA18, 0);
-}
-
-void gpio_enable_usart2(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PB26, 0);
-	gpio_select_periph_B(GPIO_PIN_PB27, 0);
-}
-
-void gpio_enable_usart3(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PB17, 0);
-	gpio_select_periph_B(GPIO_PIN_PB18, 0);
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_MACB
-void gpio_enable_macb0(void)
-{
-	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
-	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
-	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
-	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
-	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
-	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
-	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
-	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
-	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
-	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
-#if !defined(CONFIG_RMII)
-	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
-	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
-	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
-	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
-	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
-	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
-	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
-	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
-	gpio_select_periph_A(GPIO_PIN_PC18, 0);	/* SPD	*/
-#endif
-}
-
-void gpio_enable_macb1(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
-	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
-	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
-	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
-	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
-	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
-	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
-	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
-	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
-	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
-#if !defined(CONFIG_RMII)
-	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
-	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
-	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
-	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
-	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
-	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
-	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
-	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
-	gpio_select_periph_B(GPIO_PIN_PD15, 0);	/* SPD	*/
-#endif
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-void gpio_enable_mmci(void)
-{
-	gpio_select_periph_A(GPIO_PIN_PA10, 0);	/* CLK	 */
-	gpio_select_periph_A(GPIO_PIN_PA11, 0);	/* CMD	 */
-	gpio_select_periph_A(GPIO_PIN_PA12, 0);	/* DATA0 */
-	gpio_select_periph_A(GPIO_PIN_PA13, 0);	/* DATA1 */
-	gpio_select_periph_A(GPIO_PIN_PA14, 0);	/* DATA2 */
-	gpio_select_periph_A(GPIO_PIN_PA15, 0);	/* DATA3 */
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_SPI
-void gpio_enable_spi0(unsigned long cs_mask)
-{
-	gpio_select_periph_A(GPIO_PIN_PA0,  0);	/* MISO	*/
-	gpio_select_periph_A(GPIO_PIN_PA1,  0);	/* MOSI	*/
-	gpio_select_periph_A(GPIO_PIN_PA2,  0);	/* SCK	*/
-
-	/* Set up NPCSx as GPIO outputs, initially high */
-	if (cs_mask & (1 << 0)) {
-		gpio_set_value(GPIO_PIN_PA3, 1);
-		gpio_select_pio(GPIO_PIN_PA3, GPIOF_OUTPUT);
-	}
-	if (cs_mask & (1 << 1)) {
-		gpio_set_value(GPIO_PIN_PA4, 1);
-		gpio_select_pio(GPIO_PIN_PA4, GPIOF_OUTPUT);
-	}
-	if (cs_mask & (1 << 2)) {
-		gpio_set_value(GPIO_PIN_PA5, 1);
-		gpio_select_pio(GPIO_PIN_PA5, GPIOF_OUTPUT);
-	}
-	if (cs_mask & (1 << 3)) {
-		gpio_set_value(GPIO_PIN_PA20, 1);
-		gpio_select_pio(GPIO_PIN_PA20, GPIOF_OUTPUT);
-	}
-}
-
-void gpio_enable_spi1(unsigned long cs_mask)
-{
-	gpio_select_periph_B(GPIO_PIN_PA0,  0);	/* MISO	*/
-	gpio_select_periph_B(GPIO_PIN_PB1,  0);	/* MOSI	*/
-	gpio_select_periph_B(GPIO_PIN_PB5,  0);	/* SCK	*/
-
-	/* Set up NPCSx as GPIO outputs, initially high */
-	if (cs_mask & (1 << 0)) {
-		gpio_set_value(GPIO_PIN_PB2, 1);
-		gpio_select_pio(GPIO_PIN_PB2, GPIOF_OUTPUT);
-	}
-	if (cs_mask & (1 << 1)) {
-		gpio_set_value(GPIO_PIN_PB3, 1);
-		gpio_select_pio(GPIO_PIN_PB3, GPIOF_OUTPUT);
-	}
-	if (cs_mask & (1 << 2)) {
-		gpio_set_value(GPIO_PIN_PB4, 1);
-		gpio_select_pio(GPIO_PIN_PB4, GPIOF_OUTPUT);
-	}
-	if (cs_mask & (1 << 3)) {
-		gpio_set_value(GPIO_PIN_PA27, 1);
-		gpio_select_pio(GPIO_PIN_PA27, GPIOF_OUTPUT);
-	}
-}
-#endif
diff --git a/cpu/at32ap/at32ap700x/portmux.c b/cpu/at32ap/at32ap700x/portmux.c
new file mode 100644
index 0000000000..2a3b004b04
--- /dev/null
+++ b/cpu/at32ap/at32ap700x/portmux.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2006, 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/chip-features.h>
+#include <asm/arch/memory-map.h>
+#include <asm/arch/portmux.h>
+
+/*
+ * Lots of small functions here. We depend on --gc-sections getting
+ * rid of the ones we don't need.
+ */
+void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
+		unsigned long flags, unsigned long drive_strength)
+{
+	unsigned long porte_mask = 0;
+
+	if (bus_width > 16)
+		portmux_select_peripheral(PORTMUX_PORT_E, 0xffff,
+				PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+	if (addr_width > 23)
+		porte_mask |= (((1 << (addr_width - 23)) - 1) & 7) << 16;
+	if (flags & PORTMUX_EBI_CS(2))
+		porte_mask |= 1 << 25;
+	if (flags & PORTMUX_EBI_CS(4))
+		porte_mask |= 1 << 21;
+	if (flags & PORTMUX_EBI_CS(5))
+		porte_mask |= 1 << 22;
+	if (flags & (PORTMUX_EBI_CF(0) | PORTMUX_EBI_CF(1)))
+		porte_mask |= (1 << 19) | (1 << 20) | (1 << 23);
+
+	portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
+			PORTMUX_FUNC_A, 0);
+
+	if (flags & PORTMUX_EBI_NWAIT)
+		portmux_select_peripheral(PORTMUX_PORT_E, 1 << 24,
+				PORTMUX_FUNC_A, PORTMUX_PULL_UP);
+}
+
+#ifdef AT32AP700x_CHIP_HAS_MACB
+void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength)
+{
+	unsigned long portc_mask;
+
+	portc_mask = (1 << 3)	/* TXD0	*/
+		| (1 << 4)	/* TXD1	*/
+		| (1 << 7)	/* TXEN	*/
+		| (1 << 8)	/* TXCK */
+		| (1 << 9)	/* RXD0	*/
+		| (1 << 10)	/* RXD1	*/
+		| (1 << 13)	/* RXER	*/
+		| (1 << 15)	/* RXDV	*/
+		| (1 << 16)	/* MDC	*/
+		| (1 << 17);	/* MDIO	*/
+
+	if (flags & PORTMUX_MACB_MII)
+		portc_mask |= (1 << 0)	/* COL	*/
+			| (1 << 1)	/* CRS	*/
+			| (1 << 2)	/* TXER	*/
+			| (1 << 5)	/* TXD2	*/
+			| (1 << 6)	/* TXD3 */
+			| (1 << 11)	/* RXD2	*/
+			| (1 << 12)	/* RXD3	*/
+			| (1 << 14);	/* RXCK	*/
+
+	if (flags & PORTMUX_MACB_SPEED)
+		portc_mask |= (1 << 18);/* SPD	*/
+
+	/* REVISIT: Some pins are probably pure outputs */
+	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+}
+
+void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength)
+{
+	unsigned long portc_mask = 0;
+	unsigned long portd_mask;
+
+	portd_mask = (1 << 13)	/* TXD0	*/
+		| (1 << 14)	/* TXD1	*/
+		| (1 << 11)	/* TXEN	*/
+		| (1 << 12)	/* TXCK */
+		| (1 << 10)	/* RXD0	*/
+		| (1 << 6)	/* RXD1	*/
+		| (1 << 5)	/* RXER	*/
+		| (1 << 4)	/* RXDV	*/
+		| (1 << 3)	/* MDC	*/
+		| (1 << 2);	/* MDIO	*/
+
+	if (flags & PORTMUX_MACB_MII)
+		portc_mask = (1 << 19)	/* COL	*/
+			| (1 << 23)	/* CRS	*/
+			| (1 << 26)	/* TXER	*/
+			| (1 << 27)	/* TXD2	*/
+			| (1 << 28)	/* TXD3 */
+			| (1 << 29)	/* RXD2	*/
+			| (1 << 30)	/* RXD3	*/
+			| (1 << 24);	/* RXCK	*/
+
+	if (flags & PORTMUX_MACB_SPEED)
+		portd_mask |= (1 << 15);/* SPD	*/
+
+	/* REVISIT: Some pins are probably pure outputs */
+	portmux_select_peripheral(PORTMUX_PORT_D, portc_mask,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_MMCI
+void portmux_enable_mmci(unsigned int slot, unsigned long flags,
+		unsigned long drive_strength)
+{
+	unsigned long mask;
+	unsigned long portmux_flags = PORTMUX_PULL_UP;
+
+	/* First, the common CLK signal. It doesn't need a pull-up */
+	portmux_select_peripheral(PORTMUX_PORT_A, 1 << 10,
+			PORTMUX_FUNC_A, 0);
+
+	if (flags & PORTMUX_MMCI_EXT_PULLUP)
+		portmux_flags = 0;
+
+	/* Then, the per-slot signals */
+	switch (slot) {
+	case 0:
+		mask = (1 << 11) | (1 << 12);	/* CMD and DATA0 */
+		if (flags & PORTMUX_MMCI_4BIT)
+			/* DATA1..DATA3 */
+			mask |= (1 << 13) | (1 << 14) | (1 << 15);
+		portmux_select_peripheral(PORTMUX_PORT_A, mask,
+				PORTMUX_FUNC_A, portmux_flags);
+		break;
+	case 1:
+		mask = (1 << 6) | (1 << 7);	/* CMD and DATA0 */
+		if (flags & PORTMUX_MMCI_4BIT)
+			/* DATA1..DATA3 */
+			mask |= (1 << 8) | (1 << 9) | (1 << 10);
+		portmux_select_peripheral(PORTMUX_PORT_B, mask,
+				PORTMUX_FUNC_B, portmux_flags);
+		break;
+	}
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength)
+{
+	unsigned long pin_mask;
+
+	/* MOSI and SCK */
+	portmux_select_peripheral(PORTMUX_PORT_A, (1 << 1) | (1 << 2),
+			PORTMUX_FUNC_A, 0);
+	/* MISO may float */
+	portmux_select_peripheral(PORTMUX_PORT_A, 1 << 0,
+			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+
+	/* Set up NPCSx as GPIO outputs, initially high */
+	pin_mask = (cs_mask & 7) << 3;
+	if (cs_mask & (1 << 3))
+		pin_mask |= 1 << 20;
+
+	portmux_select_gpio(PORTMUX_PORT_A, pin_mask,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+}
+
+void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength)
+{
+	/* MOSI and SCK */
+	portmux_select_peripheral(PORTMUX_PORT_B, (1 << 1) | (1 << 5),
+			PORTMUX_FUNC_B, 0);
+	/* MISO may float */
+	portmux_select_peripheral(PORTMUX_PORT_B, 1 << 0,
+			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+
+	/* Set up NPCSx as GPIO outputs, initially high */
+	portmux_select_gpio(PORTMUX_PORT_B, (cs_mask & 7) << 2,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+	portmux_select_gpio(PORTMUX_PORT_A, (cs_mask & 8) << (27 - 3),
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+}
+#endif
diff --git a/cpu/at32ap/cache.c b/cpu/at32ap/cache.c
index 16a0565df2..28b945669a 100644
--- a/cpu/at32ap/cache.c
+++ b/cpu/at32ap/cache.c
@@ -22,7 +22,7 @@
 
 #include <common.h>
 
-#include <asm/cacheflush.h>
+#include <asm/arch/cacheflush.h>
 
 void dcache_clean_range(volatile void *start, size_t size)
 {
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index f92d3e2171..904bfb227e 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -65,9 +65,6 @@ int cpu_init(void)
 	sysreg_write(EVBA, (unsigned long)&_evba);
 	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET));
 
-	if(gclk_init)
-		gclk_init();
-
 	return 0;
 }
 
diff --git a/cpu/at32ap/pio.c b/cpu/at32ap/pio.c
deleted file mode 100644
index f64004b659..0000000000
--- a/cpu/at32ap/pio.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/memory-map.h>
-
-#include "pio2.h"
-
-void gpio_select_periph_A(unsigned int pin, int use_pullup)
-{
-	void *base = gpio_pin_to_addr(pin);
-	uint32_t mask = 1 << (pin & 0x1f);
-
-	if (!base)
-		panic("Invalid GPIO pin %u\n", pin);
-
-	pio2_writel(base, ASR, mask);
-	pio2_writel(base, PDR, mask);
-	if (use_pullup)
-		pio2_writel(base, PUER, mask);
-	else
-		pio2_writel(base, PUDR, mask);
-}
-
-void gpio_select_periph_B(unsigned int pin, int use_pullup)
-{
-	void *base = gpio_pin_to_addr(pin);
-	uint32_t mask = 1 << (pin & 0x1f);
-
-	if (!base)
-		panic("Invalid GPIO pin %u\n", pin);
-
-	pio2_writel(base, BSR, mask);
-	pio2_writel(base, PDR, mask);
-	if (use_pullup)
-		pio2_writel(base, PUER, mask);
-	else
-		pio2_writel(base, PUDR, mask);
-}
-
-void gpio_select_pio(unsigned int pin, unsigned long gpiof_flags)
-{
-	void *base = gpio_pin_to_addr(pin);
-	uint32_t mask = 1 << (pin & 0x1f);
-
-	if (!base)
-		panic("Invalid GPIO pin %u\n", pin);
-
-	if (gpiof_flags & GPIOF_OUTPUT) {
-		if (gpiof_flags & GPIOF_MULTIDRV)
-			pio2_writel(base, MDER, mask);
-		else
-			pio2_writel(base, MDDR, mask);
-		pio2_writel(base, PUDR, mask);
-		pio2_writel(base, OER, mask);
-	} else {
-		if (gpiof_flags & GPIOF_PULLUP)
-			pio2_writel(base, PUER, mask);
-		else
-			pio2_writel(base, PUDR, mask);
-		if (gpiof_flags & GPIOF_DEGLITCH)
-			pio2_writel(base, IFER, mask);
-		else
-			pio2_writel(base, IFDR, mask);
-		pio2_writel(base, ODR, mask);
-	}
-
-	pio2_writel(base, PER, mask);
-}
-
-void gpio_set_value(unsigned int pin, int value)
-{
-	void *base = gpio_pin_to_addr(pin);
-	uint32_t mask = 1 << (pin & 0x1f);
-
-	if (!base)
-		panic("Invalid GPIO pin %u\n", pin);
-
-	if (value)
-		pio2_writel(base, SODR, mask);
-	else
-		pio2_writel(base, CODR, mask);
-}
-
-int gpio_get_value(unsigned int pin)
-{
-	void *base = gpio_pin_to_addr(pin);
-	int value;
-
-	if (!base)
-		panic("Invalid GPIO pin %u\n", pin);
-
-	value = pio2_readl(base, PDSR);
-	return (value >> (pin & 0x1f)) & 1;
-}
diff --git a/cpu/at32ap/portmux-gpio.c b/cpu/at32ap/portmux-gpio.c
new file mode 100644
index 0000000000..9acd040d1b
--- /dev/null
+++ b/cpu/at32ap/portmux-gpio.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/arch/memory-map.h>
+#include <asm/arch/gpio.h>
+
+void portmux_select_peripheral(void *port, unsigned long pin_mask,
+		enum portmux_function func, unsigned long flags)
+{
+	/* Both pull-up and pull-down set means buskeeper */
+	if (flags & PORTMUX_PULL_DOWN)
+		gpio_writel(port, PDERS, pin_mask);
+	else
+		gpio_writel(port, PDERC, pin_mask);
+	if (flags & PORTMUX_PULL_UP)
+		gpio_writel(port, PUERS, pin_mask);
+	else
+		gpio_writel(port, PUERC, pin_mask);
+
+	/* Select drive strength */
+	if (flags & PORTMUX_DRIVE_LOW)
+		gpio_writel(port, ODCR0S, pin_mask);
+	else
+		gpio_writel(port, ODCR0C, pin_mask);
+	if (flags & PORTMUX_DRIVE_HIGH)
+		gpio_writel(port, ODCR1S, pin_mask);
+	else
+		gpio_writel(port, ODCR1C, pin_mask);
+
+	/* Select function */
+	if (func & PORTMUX_FUNC_B)
+		gpio_writel(port, PMR0S, pin_mask);
+	else
+		gpio_writel(port, PMR0C, pin_mask);
+	if (func & PORTMUX_FUNC_C)
+		gpio_writel(port, PMR1S, pin_mask);
+	else
+		gpio_writel(port, PMR1C, pin_mask);
+
+	/* Disable GPIO (i.e. enable peripheral) */
+	gpio_writel(port, GPERC, pin_mask);
+}
+
+void portmux_select_gpio(void *port, unsigned long pin_mask,
+		unsigned long flags)
+{
+	/* Both pull-up and pull-down set means buskeeper */
+	if (flags & PORTMUX_PULL_DOWN)
+		gpio_writel(port, PDERS, pin_mask);
+	else
+		gpio_writel(port, PDERC, pin_mask);
+	if (flags & PORTMUX_PULL_UP)
+		gpio_writel(port, PUERS, pin_mask);
+	else
+		gpio_writel(port, PUERC, pin_mask);
+
+	/* Enable open-drain mode if requested */
+	if (flags & PORTMUX_OPEN_DRAIN)
+		gpio_writel(port, ODMERS, pin_mask);
+	else
+		gpio_writel(port, ODMERC, pin_mask);
+
+	/* Select drive strength */
+	if (flags & PORTMUX_DRIVE_LOW)
+		gpio_writel(port, ODCR0S, pin_mask);
+	else
+		gpio_writel(port, ODCR0C, pin_mask);
+	if (flags & PORTMUX_DRIVE_HIGH)
+		gpio_writel(port, ODCR1S, pin_mask);
+	else
+		gpio_writel(port, ODCR1C, pin_mask);
+
+	/* Select direction and initial pin state */
+	if (flags & PORTMUX_DIR_OUTPUT) {
+		if (flags & PORTMUX_INIT_HIGH)
+			gpio_writel(port, OVRS, pin_mask);
+		else
+			gpio_writel(port, OVRC, pin_mask);
+		gpio_writel(port, ODERS, pin_mask);
+	} else {
+		gpio_writel(port, ODERC, pin_mask);
+	}
+
+	/* Enable GPIO */
+	gpio_writel(port, GPERS, pin_mask);
+}
diff --git a/cpu/at32ap/portmux-pio.c b/cpu/at32ap/portmux-pio.c
new file mode 100644
index 0000000000..a29f94e3ba
--- /dev/null
+++ b/cpu/at32ap/portmux-pio.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2006, 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/arch/memory-map.h>
+#include <asm/arch/gpio.h>
+
+void portmux_select_peripheral(void *port, unsigned long pin_mask,
+		enum portmux_function func, unsigned long flags)
+{
+	if (flags & PORTMUX_PULL_UP)
+		pio_writel(port, PUER, pin_mask);
+	else
+		pio_writel(port, PUDR, pin_mask);
+
+	switch (func) {
+	case PORTMUX_FUNC_A:
+		pio_writel(port, ASR, pin_mask);
+		break;
+	case PORTMUX_FUNC_B:
+		pio_writel(port, BSR, pin_mask);
+		break;
+	}
+
+	pio_writel(port, PDR, pin_mask);
+}
+
+void portmux_select_gpio(void *port, unsigned long pin_mask,
+		unsigned long flags)
+{
+	if (flags & PORTMUX_PULL_UP)
+		pio_writel(port, PUER, pin_mask);
+	else
+		pio_writel(port, PUDR, pin_mask);
+
+	if (flags & PORTMUX_OPEN_DRAIN)
+		pio_writel(port, MDER, pin_mask);
+	else
+		pio_writel(port, MDDR, pin_mask);
+
+	if (flags & PORTMUX_DIR_OUTPUT) {
+		if (flags & PORTMUX_INIT_HIGH)
+			pio_writel(port, SODR, pin_mask);
+		else
+			pio_writel(port, CODR, pin_mask);
+		pio_writel(port, OER, pin_mask);
+	} else {
+		pio_writel(port, ODR, pin_mask);
+	}
+
+	pio_writel(port, PER, pin_mask);
+}
+
+void pio_set_output_value(unsigned int pin, int value)
+{
+	void *port = pio_pin_to_port(pin);
+
+	if (!port)
+		panic("Invalid GPIO pin %u\n", pin);
+
+	__pio_set_output_value(port, pin & 0x1f, value);
+}
+
+int pio_get_input_value(unsigned int pin)
+{
+	void *port = pio_pin_to_port(pin);
+
+	if (!port)
+		panic("Invalid GPIO pin %u\n", pin);
+
+	return __pio_get_input_value(port, pin & 0x1f);
+}