Prepare for SoC rework of ARM code:

- rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)

9 files changed, 18 insertions, 20 deletions

diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index bde936a751..0e15965df6 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -316,10 +316,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependent, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr, ip
 
 	mov	pc, lr
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index f348193642..a7cabf8f32 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -257,10 +257,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr, ip
 
 	mov	pc, lr
diff --git a/cpu/at91rm9200/lowlevel.S b/cpu/at91rm9200/lowlevel.S
index 030f9e194a..c8af7a602a 100644
--- a/cpu/at91rm9200/lowlevel.S
+++ b/cpu/at91rm9200/lowlevel.S
@@ -30,7 +30,7 @@
 #include <config.h>
 #include <version.h>
 
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 /*
  * some parameters for the board
  *
@@ -197,4 +197,4 @@ SMRDATA1:
 	.word SDRAM
 	.word SDRAM_VAL
 	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S
index 0dbc0094a4..e897e6b9c9 100644
--- a/cpu/at91rm9200/start.S
+++ b/cpu/at91rm9200/start.S
@@ -115,7 +115,7 @@ reset:
 	orr     r0,r0,#0xd3 /* was 13 */
 	msr     cpsr,r0
 
-#ifdef CONFIG_BOOTBINFUNC
+#ifdef CONFIG_INIT_CRITICAL
 	/* scratch stack */
 	ldr 	r1, =0x00204000
 	/* Insure word alignment */
@@ -141,7 +141,7 @@ reset:
 	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
 	orr	r0, r0, #0xC0000000	@ set bits 31:30 (iA, nF)
 	mcr     p15, 0, r0, c1, c0, 0	@ write r0 in cp15 control register (cp15 r1)
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
 	/*
 	 * relocate exeception table
 	 */
@@ -160,9 +160,7 @@ copyex:
 	 */
 #ifdef CONFIG_INIT_CRITICAL
 	bl      cpu_init_crit
-#endif
 
-#ifdef CONFIG_BOOTBINFUNC
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
@@ -179,7 +177,7 @@ copy_loop:
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
+#endif /* CONFIG_INIT_CRITICAL */
 
 	/* Set up the stack						    */
 stack_setup:
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
index 4f023a59fe..5dca77363f 100644
--- a/cpu/lh7a40x/start.S
+++ b/cpu/lh7a40x/start.S
@@ -229,10 +229,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr, ip
 
 	mov	pc, lr
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 45a90a80fa..ff105a4184 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -243,7 +243,7 @@ reset:
 
 	/* Initialize any external memory.
 	 */
-	bal	memsetup
+	bal	lowlevel_init
 	nop
 
 	/* Initialize caches...
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index d74f41ff38..da753a18da 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -218,10 +218,10 @@ setspeed_done:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip,	lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr,	ip
 
 	/* Memory interfaces are working. Disable MMU and enable I-cache.   */
diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S
index b4b7c3f62c..fc7f59228a 100644
--- a/cpu/s3c44b0/start.S
+++ b/cpu/s3c44b0/start.S
@@ -117,9 +117,9 @@ reset:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
-	bl	memsetup
+	bl	lowlevel_init
 #endif
 
 relocate:				/* relocate U-Boot to RAM	    */
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
index 7974344070..08e41c7d79 100644
--- a/cpu/sa1100/start.S
+++ b/cpu/sa1100/start.S
@@ -213,10 +213,10 @@ cpu_init_crit:
 	/*
 	 * before relocating, we have to setup RAM timing
 	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
+	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip,	lr
-	bl	memsetup
+	bl	lowlevel_init
 	mov	lr,	ip
 
 	/*