diff options
| author | Stefan Roese <sr@denx.de> | 2007-10-18 07:39:38 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2007-10-31 21:20:50 +0100 |
| commit | 5cb4af4791f61843432155142b6cfac901f66c10 (patch) | |
| tree | 1d8d742205d91220a21da7b2df45543163354253 /cpu/ppc4xx | |
| parent | d4cb2d17946466740afeb195a57d6cb290bf4cc0 (diff) | |
| download | blackbird-obmc-uboot-5cb4af4791f61843432155142b6cfac901f66c10.tar.gz blackbird-obmc-uboot-5cb4af4791f61843432155142b6cfac901f66c10.zip | |
ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
This patch adds endpoint support for the AMCC Kilauea eval board. It can
be tested by connecting a reworked PCIe cable (only 1x lane singles
connected) to another root-complex.
In this test setup, a 64MB inbound window is configured at BAR0 which maps
to 0 on the PLB side. So accessing this BAR0 from the root-complex will
access the first 64MB of the SDRAM on the PPC side.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'cpu/ppc4xx')
| -rw-r--r-- | cpu/ppc4xx/4xx_pcie.c | 31 |
1 files changed, 21 insertions, 10 deletions
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c index 9ab358857a..da179f9c3a 100644 --- a/cpu/ppc4xx/4xx_pcie.c +++ b/cpu/ppc4xx/4xx_pcie.c @@ -474,12 +474,6 @@ int __ppc4xx_init_pcie_port_hw(int port, int rootport) { u32 val; - /* - * test-only: - * This needs some testing and perhaps changes for - * endpoint configuration. Probably no PHY reset at all, etc. - * sr, 2007-10-03 - */ if (rootport) val = 0x00401000; else @@ -496,7 +490,10 @@ int __ppc4xx_init_pcie_port_hw(int port, int rootport) udelay(1000); /* deassert the PE0_hotreset */ - SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000); + if (is_end_point(port)) + SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000); + else + SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000); /* poll for phy !reset */ while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000)) @@ -903,11 +900,22 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port) #endif } - /* Set up 16GB inbound memory window at 0 */ + /* Set up 64MB inbound memory window at 0 */ out_le32(mbase + PCI_BASE_ADDRESS_0, 0); out_le32(mbase + PCI_BASE_ADDRESS_1, 0); - out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); - out_le32(mbase + PECFG_BAR0LMPA, 0); + + out_le32(mbase + PECFG_PIM01SAH, 0xffffffff); + out_le32(mbase + PECFG_PIM01SAL, 0xfc000000); + + /* Setup BAR0 */ + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff); + out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64); + + /* Disable BAR1 & BAR2 */ + out_le32(mbase + PECFG_BAR1MPA, 0); + out_le32(mbase + PECFG_BAR2HMPA, 0); + out_le32(mbase + PECFG_BAR2LMPA, 0); + out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CFG_PCIE_INBOUND_BASE)); out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CFG_PCIE_INBOUND_BASE)); out_le32(mbase + PECFG_PIMEN, 0x1); @@ -919,6 +927,9 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port) out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */ out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */ + /* Set Class Code to Processor/PPC */ + out_le32(mbase + 0x208, 0x0b200001); + attempts = 10; while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) { if (!(attempts--)) { |
