Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

3 files changed, 99 insertions, 36 deletions

diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 4544b78ac1..b40e4b1515 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,6 +60,26 @@
 		       "SDRAM_" #mnemonic, SDRAM_##mnemonic, data);	\
 	} while (0)
 
+#if defined(CONFIG_440)
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
+ * memory region. Right now the cache should still be disabled in U-Boot
+ * because of the EMAC driver, that need its buffer descriptor to be located
+ * in non cached memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+/* enable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE		0
+#else
+/* disable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE		TLB_WORD2_I_ENABLE
+#endif /* CONFIG_4xx_DCACHE */
+#endif /* CONFIG_440 */
+
 #if defined(CONFIG_SPD_EEPROM)
 
 /*-----------------------------------------------------------------------------+
@@ -131,22 +151,6 @@
 #define NUMLOOPS	64		/* memory test loops */
 
 /*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
-#endif
-
-/*
  * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
  * To support such configurations, we "only" map the first 2GB via the TLB's. We
  * need some free virtual address space for the remaining peripherals like, SoC
@@ -2958,9 +2962,10 @@ static void test(void)
 
 /*-----------------------------------------------------------------------------
  * Function:	initdram
- * Description: Configures the PPC405EX(r) DDR1/DDR2 SDRAM memory
- * 		banks. The configuration is performed using static, compile-
+ * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
+ * 		The configuration is performed using static, compile-
  *		time parameters.
+ * 		Configures the PPC405EX(r) and PPC460EX/GT
  *---------------------------------------------------------------------------*/
 phys_size_t initdram(int board_type)
 {
@@ -2976,6 +2981,18 @@ phys_size_t initdram(int board_type)
 #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 	unsigned long val;
 
+#if defined(CONFIG_440)
+	mtdcr(SDRAM_R0BAS,	CONFIG_SYS_SDRAM_R0BAS);
+	mtdcr(SDRAM_R1BAS,	CONFIG_SYS_SDRAM_R1BAS);
+	mtdcr(SDRAM_R2BAS,	CONFIG_SYS_SDRAM_R2BAS);
+	mtdcr(SDRAM_R3BAS,	CONFIG_SYS_SDRAM_R3BAS);
+	mtdcr(SDRAM_PLBADDULL,	CONFIG_SYS_SDRAM_PLBADDULL);	/* MQ0_BAUL */
+	mtdcr(SDRAM_PLBADDUHB,	CONFIG_SYS_SDRAM_PLBADDUHB);	/* MQ0_BAUH */
+	mtdcr(SDRAM_CONF1LL,	CONFIG_SYS_SDRAM_CONF1LL);
+	mtdcr(SDRAM_CONF1HB,	CONFIG_SYS_SDRAM_CONF1HB);
+	mtdcr(SDRAM_CONFPATHB,	CONFIG_SYS_SDRAM_CONFPATHB);
+#endif
+
 	/* Set Memory Bank Configuration Registers */
 
 	mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
@@ -3069,6 +3086,14 @@ phys_size_t initdram(int board_type)
 	mfsdram(SDRAM_MCOPT2, val);
 	mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
 
+#if defined(CONFIG_440)
+	/*
+	 * Program TLB entries with caches enabled, for best performace
+	 * while auto-calibrating and ECC generation
+	 */
+	program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
+#endif
+
 #if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 	/*------------------------------------------------------------------
@@ -3082,6 +3107,16 @@ phys_size_t initdram(int board_type)
 	ecc_init(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
 #endif /* defined(CONFIG_DDR_ECC) */
 
+#if defined(CONFIG_440)
+	/*
+	 * Now after initialization (auto-calibration and ECC generation)
+	 * remove the TLB entries with caches enabled and program again with
+	 * desired cache functionality
+	 */
+	remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
+	program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
+#endif
+
 	ppc4xx_ibm_ddr2_register_dump();
 
 #if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 66a77370c8..a676b30efe 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -41,6 +41,18 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void board_reset(void);
 
+/*
+ * To provide an interface to detect CPU number for boards that support
+ * more then one CPU, we implement the "weak" default functions here.
+ *
+ * Returns CPU number
+ */
+int __get_cpu_num(void)
+{
+	return NA_OR_UNKNOWN_CPU;
+}
+int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
+
 #if defined(CONFIG_405GP) || \
     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
@@ -274,8 +286,13 @@ int checkcpu (void)
 #if !defined(CONFIG_IOP480)
 	char addstr[64] = "";
 	sys_info_t sys_info;
+	int cpu_num;
 
-	puts ("CPU:   ");
+	cpu_num = get_cpu_num();
+	if (cpu_num >= 0)
+		printf("CPU%d:  ", cpu_num);
+	else
+		puts("CPU:   ");
 
 	get_sys_info(&sys_info);
 
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
index a97484fa74..c55e1cfbb7 100644
--- a/cpu/ppc4xx/fdt.c
+++ b/cpu/ppc4xx/fdt.c
@@ -37,29 +37,40 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void __ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 val[4];
 	int rc;
+	int i;
+	u32 bxcr;
+	u32 ranges[EBC_NUM_BANKS * 4];
+	u32 *p = ranges;
+	char *ebc_path = "/plb/opb/ebc";
 
 	ft_cpu_setup(blob, bd);
 
-	/* Fixup NOR mapping */
-	val[0] = 0;				/* chip select number */
-	val[1] = 0;				/* always 0 */
-	val[2] = gd->bd->bi_flashstart;
-	val[3] = gd->bd->bi_flashsize;
-	if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) {
-		rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
-					  val, sizeof(val), 1);
-	} else {
-		/*
-		 * Some 405 PPC's have EBC as direct PLB child in the dts
-		 */
-		rc = fdt_find_and_setprop(blob, "/plb/ebc", "ranges",
-					  val, sizeof(val), 1);
+	/*
+	 * Read 4xx EBC bus bridge registers to get mappings of the
+	 * peripheral banks into the OPB/PLB address space
+	 */
+	for (i = 0; i < EBC_NUM_BANKS; i++) {
+		mtdcr(ebccfga, EBC_BXCR(i));
+		bxcr = mfdcr(ebccfgd);
+
+		if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
+			*p++ = i;
+			*p++ = 0;
+			*p++ = bxcr & EBC_BXCR_BAS_MASK;
+			*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+		}
 	}
-	if (rc)
-		printf("Unable to update property NOR mapping, err=%s\n",
+
+	/* Some 405 PPC's have EBC as direct PLB child in the dts */
+	if (fdt_path_offset(blob, "/plb/opb/ebc") < 0)
+		strcpy(ebc_path, "/plb/ebc");
+	rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
+				  (p - ranges) * sizeof(u32), 1);
+	if (rc) {
+		printf("Unable to update property EBC mappings, err=%s\n",
 		       fdt_strerror(rc));
+	}
 }
 void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));