Initial revision

3 files changed, 1797 insertions, 0 deletions

diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
new file mode 100644
index 0000000000..b1b58b089b
--- /dev/null
+++ b/cpu/mpc8xx/cpu.c
@@ -0,0 +1,516 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * m8xx.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8xx.h>
+#include <asm/cache.h>
+
+static char *cpu_warning = "\n         " \
+	"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
+
+#if ((defined(CONFIG_MPC860) || defined(CONFIG_MPC855)) && \
+     !defined(CONFIG_MPC862))
+# ifdef	CONFIG_MPC855
+#  define	ID_STR	"PC855"
+# else
+#  define	ID_STR	"PC860"
+# endif
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+	uint k, m;
+	char buf[32];
+	char pre = 'X';
+	char *mid = "xx";
+	char *suf;
+
+	/* the highest 16 bits should be 0x0050 for a 860 */
+
+	if ((pvr >> 16) != 0x0050)
+		return -1;
+
+	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+	m = 0;
+
+	switch (k) {
+	case 0x00020001: pre = 'p'; suf = ""; break;
+	case 0x00030001: suf = ""; break;
+	case 0x00120003: suf = "A"; break;
+	case 0x00130003: suf = "A3"; break;
+
+	case 0x00200004: suf = "B"; break;
+
+	case 0x00300004: suf = "C"; break;
+	case 0x00310004: suf = "C1"; m = 1;
+		break;
+
+	case 0x00200064: mid = "SR"; suf = "B"; break;
+	case 0x00300065: mid = "SR"; suf = "C"; break;
+	case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
+	case 0x05010000: suf = "D3"; m = 1; break;
+	case 0x05020000: suf = "D4"; m = 1; break;
+
+		/* this value is not documented anywhere */
+	case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
+
+	default: suf = NULL; break;
+	}
+
+	if (suf)
+		printf ("%c" ID_STR "%sZPnn%s", pre, mid, suf);
+	else
+		printf ("unknown M" ID_STR " (0x%08x)", k);
+
+	printf (" at %s MHz:", strmhz (buf, clock));
+
+	printf (" %u kB I-Cache", checkicache () >> 10);
+	printf (" %u kB D-Cache", checkdcache () >> 10);
+
+	/* lets check and see if we're running on a 860T (or P?) */
+
+	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+		printf (" FEC present");
+	}
+
+	if (!m) {
+		puts (cpu_warning);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+#elif defined(CONFIG_MPC862)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+	uint k, m;
+	char buf[32];
+	char pre = 'X';
+	char *mid = "xx";
+	char *suf;
+
+	/* the highest 16 bits should be 0x0050 for a 8xx */
+
+	if ((pvr >> 16) != 0x0050)
+		return -1;
+
+	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+	m = 0;
+
+	switch (k) {
+
+		/* this value is not documented anywhere */
+	case 0x06000000: mid = "P"; suf = "0"; break;
+	case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
+	case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
+	default: suf = NULL; break;
+	}
+
+	if (suf)
+		printf ("%cPC862%sZPnn%s", pre, mid, suf);
+	else
+		printf ("unknown MPC862 (0x%08x)", k);
+
+	printf (" at %s MHz:", strmhz (buf, clock));
+
+	printf (" %u kB I-Cache", checkicache () >> 10);
+	printf (" %u kB D-Cache", checkdcache () >> 10);
+
+	/* lets check and see if we're running on a 862T (or P?) */
+
+	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+		printf (" FEC present");
+	}
+
+	if (!m) {
+		puts (cpu_warning);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+#elif defined(CONFIG_MPC823)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+	uint k, m;
+	char buf[32];
+	char *suf;
+
+	/* the highest 16 bits should be 0x0050 for a 8xx */
+
+	if ((pvr >> 16) != 0x0050)
+		return -1;
+
+	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+	m = 0;
+
+	switch (k) {
+		/* MPC823 */
+	case 0x20000000: suf = "0"; break;
+	case 0x20010000: suf = "0.1"; break;
+	case 0x20020000: suf = "Z2/3"; break;
+	case 0x20020001: suf = "Z3"; break;
+	case 0x21000000: suf = "A"; break;
+	case 0x21010000: suf = "B"; m = 1; break;
+	case 0x21010001: suf = "B2"; m = 1; break;
+		/* MPC823E */
+	case 0x24010000: suf = NULL;
+			puts ("PPC823EZTnnB2");
+			m = 1;
+			break;
+	default:
+			suf = NULL;
+			printf ("unknown MPC823 (0x%08x)", k);
+			break;
+	}
+	if (suf)
+		printf ("PPC823ZTnn%s", suf);
+
+	printf (" at %s MHz:", strmhz (buf, clock));
+
+	printf (" %u kB I-Cache", checkicache () >> 10);
+	printf (" %u kB D-Cache", checkdcache () >> 10);
+
+	/* lets check and see if we're running on a 860T (or P?) */
+
+	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+		puts (" FEC present");
+	}
+
+	if (!m) {
+		puts (cpu_warning);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+#elif defined(CONFIG_MPC850)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+	uint k, m;
+	char buf[32];
+
+	/* the highest 16 bits should be 0x0050 for a 8xx */
+
+	if ((pvr >> 16) != 0x0050)
+		return -1;
+
+	k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+	m = 0;
+
+	switch (k) {
+	case 0x20020001:
+		printf ("XPC850xxZT");
+		break;
+	case 0x21000065:
+		printf ("XPC850xxZTA");
+		break;
+	case 0x21010067:
+		printf ("XPC850xxZTB");
+		m = 1;
+		break;
+	case 0x21020068:
+		printf ("XPC850xxZTC");
+		m = 1;
+		break;
+	default:
+		printf ("unknown MPC850 (0x%08x)", k);
+	}
+	printf (" at %s MHz:", strmhz (buf, clock));
+
+	printf (" %u kB I-Cache", checkicache () >> 10);
+	printf (" %u kB D-Cache", checkdcache () >> 10);
+
+	/* lets check and see if we're running on a 850T (or P?) */
+
+	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+		printf (" FEC present");
+	}
+
+	if (!m) {
+		puts (cpu_warning);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+#else
+#error CPU undefined
+#endif
+/* ------------------------------------------------------------------------- */
+
+int checkcpu (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	ulong clock = gd->cpu_clk;
+	uint immr = get_immr (0);	/* Return full IMMR contents */
+	uint pvr = get_pvr ();
+
+	puts ("CPU:   ");
+
+	/* 850 has PARTNUM 20 */
+	/* 801 has PARTNUM 10 */
+	return check_CPU (clock, pvr, immr);
+}
+
+/* ------------------------------------------------------------------------- */
+/* L1 i-cache                                                                */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB)              */
+/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB)             */
+
+int checkicache (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	u32 cacheon = rd_ic_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP860
+	u32 k = memctl->memc_br1 & ~0x00007fff;	/* probe in flash memoryarea */
+#else
+	u32 k = memctl->memc_br0 & ~0x00007fff;	/* probe in flash memoryarea */
+#endif
+	u32 m;
+	u32 lines = -1;
+
+	wr_ic_cst (IDC_UNALL);
+	wr_ic_cst (IDC_INVALL);
+	wr_ic_cst (IDC_DISABLE);
+	__asm__ volatile ("isync");
+
+	while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
+		wr_ic_adr (k);
+		wr_ic_cst (IDC_LDLCK);
+		__asm__ volatile ("isync");
+
+		lines++;
+		k += 0x10;				/* the number of bytes in a cacheline */
+	}
+
+	wr_ic_cst (IDC_UNALL);
+	wr_ic_cst (IDC_INVALL);
+
+	if (cacheon)
+		wr_ic_cst (IDC_ENABLE);
+	else
+		wr_ic_cst (IDC_DISABLE);
+
+	__asm__ volatile ("isync");
+
+	return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+/* L1 d-cache                                                                */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB)              */
+/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB)              */
+/* call with cache disabled                                                  */
+
+int checkdcache (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	u32 cacheon = rd_dc_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP860
+	u32 k = memctl->memc_br1 & ~0x00007fff;	/* probe in flash memoryarea */
+#else
+	u32 k = memctl->memc_br0 & ~0x00007fff;	/* probe in flash memoryarea */
+#endif
+	u32 m;
+	u32 lines = -1;
+
+	wr_dc_cst (IDC_UNALL);
+	wr_dc_cst (IDC_INVALL);
+	wr_dc_cst (IDC_DISABLE);
+
+	while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
+		wr_dc_adr (k);
+		wr_dc_cst (IDC_LDLCK);
+		lines++;
+		k += 0x10;	/* the number of bytes in a cacheline */
+	}
+
+	wr_dc_cst (IDC_UNALL);
+	wr_dc_cst (IDC_INVALL);
+
+	if (cacheon)
+		wr_dc_cst (IDC_ENABLE);
+	else
+		wr_dc_cst (IDC_DISABLE);
+
+	return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+
+void upmconfig (uint upm, uint * table, uint size)
+{
+	uint i;
+	uint addr = 0;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	for (i = 0; i < size; i++) {
+		memctl->memc_mdr = table[i];	/* (16-15) */
+		memctl->memc_mcr = addr | upm;	/* (16-16) */
+		addr++;
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc,
+			  char *argv[])
+{
+	ulong msr, addr;
+
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	immap->im_clkrst.car_plprcr |= PLPRCR_CSR;	/* Checkstop Reset enable */
+
+	/* Interrupts and MMU off */
+	__asm__ volatile ("mtspr    81, 0");
+	__asm__ volatile ("mfmsr    %0":"=r" (msr));
+
+	msr &= ~0x1030;
+	__asm__ volatile ("mtmsr    %0"::"r" (msr));
+
+	/*
+	 * Trying to execute the next instruction at a non-existing address
+	 * should cause a machine check, resulting in reset
+	 */
+#ifdef CFG_RESET_ADDRESS
+	addr = CFG_RESET_ADDRESS;
+#else
+	/*
+	 * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE
+	 * - sizeof (ulong) is usually a valid address. Better pick an address
+	 * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
+	 * "(ulong)-1" used to be a good choice for many systems...
+	 */
+	addr = CFG_MONITOR_BASE - sizeof (ulong);
+#endif
+	((void (*)(void)) addr) ();
+	return 1;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ * See table 15-5 pp. 15-16, and SCCR[RTSEL] pp. 15-27.
+ */
+unsigned long get_tbclk (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile immap_t *immr = (volatile immap_t *) CFG_IMMR;
+	ulong oscclk, factor;
+
+	if (immr->im_clkrst.car_sccr & SCCR_TBS) {
+		return (gd->cpu_clk / 16);
+	}
+
+	factor = (((CFG_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+
+	oscclk = gd->cpu_clk / factor;
+
+	if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+		return (oscclk / 4);
+	}
+	return (oscclk / 16);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+	int re_enable = disable_interrupts ();
+
+	reset_8xx_watchdog ((immap_t *) CFG_IMMR);
+	if (re_enable)
+		enable_interrupts ();
+}
+
+void reset_8xx_watchdog (volatile immap_t * immr)
+{
+# if defined(CONFIG_LWMON)
+	/*
+	 * The LWMON board uses a MAX6301 Watchdog
+	 * with the trigger pin connected to port PA.7
+	 *
+	 * (The old board version used a MAX706TESA Watchdog, which
+	 * had to be handled exactly the same.)
+	 */
+# define WATCHDOG_BIT	0x0100
+	immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT);	/* GPIO     */
+	immr->im_ioport.iop_padir |= WATCHDOG_BIT;	/* Output   */
+	immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT);	/* active output */
+
+	immr->im_ioport.iop_padat ^= WATCHDOG_BIT;	/* Toggle WDI   */
+# else
+	/*
+	 * All other boards use the MPC8xx Internal Watchdog
+	 */
+	immr->im_siu_conf.sc_swsr = 0x556c;	/* write magic1 */
+	immr->im_siu_conf.sc_swsr = 0xaa39;	/* write magic2 */
+# endif /* CONFIG_LWMON */
+}
+
+#endif /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
new file mode 100644
index 0000000000..d43dcaafdb
--- /dev/null
+++ b/cpu/mpc8xx/fec.c
@@ -0,0 +1,710 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <commproc.h>
+#include <net.h>
+#include <command.h>
+
+#undef	ET_DEBUG
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+
+#ifdef CFG_DISCOVER_PHY
+#include <miiphy.h>
+static void mii_discover_phy(void);
+#endif
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH  1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+#define PKT_MAXBUF_SIZE		1518
+#define PKT_MINBUF_SIZE		64
+#define PKT_MAXBLR_SIZE		1520
+
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx;	/* index of the current RX buffer */
+static uint txIdx;	/* index of the current TX buffer */
+
+/*
+  * FEC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t rxbd[PKTBUFSRX];		/* Rx BD */
+    cbd_t txbd[TX_BUF_CNT];		/* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx = NULL;
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length);
+static int fec_recv(struct eth_device* dev);
+static int fec_init(struct eth_device* dev, bd_t * bd);
+static void fec_halt(struct eth_device* dev);
+
+int fec_initialize(bd_t *bis)
+{
+	struct eth_device* dev;
+
+	dev = (struct eth_device*) malloc(sizeof *dev);
+
+	sprintf(dev->name, "FEC ETHERNET");
+	dev->iobase = 0;
+	dev->priv   = 0;
+	dev->init   = fec_init;
+	dev->halt   = fec_halt;
+	dev->send   = fec_send;
+	dev->recv   = fec_recv;
+
+	eth_register(dev);
+
+	return 1;
+}
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length)
+{
+	int j, rc;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+	/* section 16.9.23.3
+	 * Wait for ready
+	 */
+	j = 0;
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j>=TOUT_LOOP) {
+		printf("TX not ready\n");
+	}
+
+	rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+	rtx->txbd[txIdx].cbd_datlen  = length;
+	rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
+	__asm__ ("eieio");
+
+	/* Activate transmit Buffer Descriptor polling */
+	fecp->fec_x_des_active = 0x01000000;	/* Descriptor polling active	*/
+
+	j = 0;
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+#if defined(CONFIG_ICU862)
+		udelay(10);
+#else
+		udelay(1);
+#endif
+		j++;
+	}
+	if (j>=TOUT_LOOP) {
+		printf("TX timeout\n");
+	}
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: cycles: %d    status: %x  retry cnt: %d\n",
+	__FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
+	(rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
+#endif
+	/* return only status bits */;
+	rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
+
+	txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+	return rc;
+}
+
+static int fec_recv(struct eth_device* dev)
+{
+	int length;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+   for (;;) {
+	/* section 16.9.23.2 */
+	if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+		length = -1;
+		break;     /* nothing received - leave for() loop */
+	}
+
+	length = rtx->rxbd[rxIdx].cbd_datlen;
+
+	if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+#ifdef ET_DEBUG
+		printf("%s[%d] err: %x\n",
+		__FUNCTION__,__LINE__,rtx->rxbd[rxIdx].cbd_sc);
+#endif
+	} else {
+		/* Pass the packet up to the protocol layers. */
+		NetReceive(NetRxPackets[rxIdx], length - 4);
+	}
+
+	/* Give the buffer back to the FEC. */
+	rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+	/* wrap around buffer index when necessary */
+	if ((rxIdx + 1) >= PKTBUFSRX) {
+		rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+		rxIdx = 0;
+	} else {
+		rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+		rxIdx++;
+	}
+
+	__asm__ ("eieio");
+
+	/* Try to fill Buffer Descriptors */
+	fecp->fec_r_des_active = 0x01000000;	/* Descriptor polling active	*/
+   }
+
+   return length;
+}
+
+/**************************************************************
+ *
+ * FEC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+#define	FEC_ECNTRL_PINMUX	0x00000004
+#define FEC_ECNTRL_ETHER_EN	0x00000002
+#define FEC_ECNTRL_RESET	0x00000001
+
+#define FEC_RCNTRL_BC_REJ	0x00000010
+#define FEC_RCNTRL_PROM		0x00000008
+#define FEC_RCNTRL_MII_MODE	0x00000004
+#define FEC_RCNTRL_DRT		0x00000002
+#define FEC_RCNTRL_LOOP		0x00000001
+
+#define FEC_TCNTRL_FDEN		0x00000004
+#define FEC_TCNTRL_HBC		0x00000002
+#define FEC_TCNTRL_GTS		0x00000001
+
+#define	FEC_RESET_DELAY		50
+
+static int fec_init(struct eth_device* dev, bd_t * bd)
+{
+
+	int i;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+#if defined(CONFIG_FADS) && defined(CONFIG_MPC860T)
+	/* configure FADS for fast (FEC) ethernet, half-duplex */
+	/* The LXT970 needs about 50ms to recover from reset, so
+	 * wait for it by discovering the PHY before leaving eth_init().
+	 */
+	{
+		volatile uint *bcsr4 = (volatile uint *) BCSR4;
+		*bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
+			| (BCSR4_FETHCFG0 | BCSR4_FETHFDE | BCSR4_FETHRST);
+
+		/* reset the LXT970 PHY */
+		*bcsr4 &= ~BCSR4_FETHRST;
+		udelay (10);
+		*bcsr4 |= BCSR4_FETHRST;
+		udelay (10);
+	}
+#endif
+	/* Whack a reset.
+	 * A delay is required between a reset of the FEC block and
+	 * initialization of other FEC registers because the reset takes
+	 * some time to complete. If you don't delay, subsequent writes
+	 * to FEC registers might get killed by the reset routine which is
+	 * still in progress.
+	 */
+	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+	for (i = 0;
+	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+	     ++i) {
+		udelay (1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf ("FEC_RESET_DELAY timeout\n");
+		return 0;
+	}
+
+	/* We use strictly polling mode only
+	 */
+	fecp->fec_imask = 0;
+
+	/* Clear any pending interrupt
+	 */
+	fecp->fec_ievent = 0xffc0;
+
+	/* No need to set the IVEC register */
+
+	/* Set station address
+	 */
+#define ea eth_get_dev()->enetaddr
+	fecp->fec_addr_low   =	(ea[0] << 24) | (ea[1] << 16) |
+				(ea[2] <<  8) | (ea[3]      ) ;
+	fecp->fec_addr_high  =	(ea[4] <<  8) | (ea[5]	    ) ;
+#undef ea
+
+	/* Clear multicast address hash table
+	 */
+	fecp->fec_hash_table_high = 0;
+	fecp->fec_hash_table_low  = 0;
+
+	/* Set maximum receive buffer size.
+	 */
+	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+
+	/* Set maximum frame length
+	 */
+	fecp->fec_r_hash = PKT_MAXBUF_SIZE;
+
+	/*
+	 * Setup Buffers and Buffer Desriptors
+	 */
+	rxIdx = 0;
+	txIdx = 0;
+
+	if (!rtx) {
+#ifdef CFG_ALLOC_DPRAM
+	    rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + dpram_alloc_align(sizeof(RTXBD),8));
+#else
+	    rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
+#endif
+	}
+	/*
+	 * Setup Receiver Buffer Descriptors (13.14.24.18)
+	 * Settings:
+	 *     Empty, Wrap
+	 */
+	for (i = 0; i < PKTBUFSRX; i++) {
+		rtx->rxbd[i].cbd_sc      = BD_ENET_RX_EMPTY;
+		rtx->rxbd[i].cbd_datlen  = 0;	/* Reset */
+		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+	}
+	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+	/*
+	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+	 * Settings:
+	 *    Last, Tx CRC
+	 */
+	for (i = 0; i < TX_BUF_CNT; i++) {
+		rtx->txbd[i].cbd_sc      = BD_ENET_TX_LAST | BD_ENET_TX_TC;
+		rtx->txbd[i].cbd_datlen  = 0;	/* Reset */
+		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+	}
+	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+	/* Set receive and transmit descriptor base
+	 */
+	fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
+	fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
+
+	/* Enable MII mode
+	 */
+#if 0	/* Full duplex mode */
+	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
+	fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
+#else	/* Half duplex mode */
+	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+	fecp->fec_x_cntrl = 0;
+#endif
+
+	/* Enable big endian and don't care about SDMA FC.
+	 */
+	fecp->fec_fun_code = 0x78000000;
+
+	/* Set MII speed to 2.5 MHz or slightly below.
+	 * According to the MPC860T (Rev. D) Fast ethernet controller user
+	 * manual (6.2.14),
+	 * the MII management interface clock must be less than or equal
+	 * to 2.5 MHz.
+	 * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+	 * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
+	 */
+	fecp->fec_mii_speed = ((bd->bi_busfreq + 4999999) / 5000000) << 1;
+
+#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+	/* Configure all of port D for MII.
+	 */
+	immr->im_ioport.iop_pdpar = 0x1fff;
+
+	/* Bits moved from Rev. D onward */
+	if ((get_immr (0) & 0xffff) < 0x0501) {
+		immr->im_ioport.iop_pddir = 0x1c58;	/* Pre rev. D */
+	} else {
+		immr->im_ioport.iop_pddir = 0x1fff;	/* Rev. D and later */
+	}
+#else
+	/* Configure port A for MII.
+	*/
+
+#if defined(CONFIG_ICU862) && defined(CFG_DISCOVER_PHY)
+
+	/* On the ICU862 board the MII-MDC pin is routed to PD8 pin
+	 * of CPU, so for this board we need to configure Utopia and
+	 * enable PD8 to MII-MDC function */
+	immr->im_ioport.iop_pdpar |= 0x4080;
+#endif
+
+	/* Has Utopia been configured? */
+	if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
+		/*
+		 * YES - Use MUXED mode for UTOPIA bus.
+		 * This frees Port A for use by MII (see 862UM table 41-6).
+		 */
+		immr->im_ioport.utmode &= ~0x80;
+	} else {
+		/*
+		 * NO - set SPLIT mode for UTOPIA bus.
+		 *
+		 * This doesn't really effect UTOPIA (which isn't
+		 * enabled anyway) but just tells the 862
+		 * to use port A for MII (see 862UM table 41-6).
+		 */
+		immr->im_ioport.utmode |= 0x80;
+	}
+#endif	/* !defined(CONFIG_ICU862) */
+
+	rxIdx = 0;
+	txIdx = 0;
+
+	/* Now enable the transmit and receive processing
+	 */
+	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+
+#ifdef CFG_DISCOVER_PHY
+	/* wait for the PHY to wake up after reset
+	 */
+	mii_discover_phy();
+#endif
+
+	/* And last, try to fill Rx Buffer Descriptors */
+	fecp->fec_r_des_active = 0x01000000;	/* Descriptor polling active	*/
+
+	return 1;
+}
+
+
+
+static void fec_halt(struct eth_device* dev)
+{
+#if 0
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#if 0
+void restart(void)
+{
+   volatile immap_t *immr = (immap_t *)CFG_IMMR;
+   immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+#endif
+
+#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
+
+static	int	phyaddr = -1;	/* didn't find a PHY yet */
+static	uint	phytype;
+
+/* Make MII read/write commands for the FEC.
+*/
+
+#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | \
+						(REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | \
+						(REG & 0x1f) << 18) | \
+						(VAL & 0xffff))
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
+#define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
+#define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
+#define FEC_ENET_GRA	((uint)0x10000000)	/* Graceful stop complete */
+#define FEC_ENET_TXF	((uint)0x08000000)	/* Full frame transmitted */
+#define FEC_ENET_TXB	((uint)0x04000000)	/* A buffer was transmitted */
+#define FEC_ENET_RXF	((uint)0x02000000)	/* Full frame received */
+#define FEC_ENET_RXB	((uint)0x01000000)	/* A buffer was received */
+#define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */
+#define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */
+
+/* PHY identification
+ */
+#define PHY_ID_LXT970		0x78100000	/* LXT970 */
+#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
+#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
+#define PHY_ID_QS6612		0x01814400	/* QS6612 */
+#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
+#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
+#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
+
+
+/* send command to phy using mii, wait for result */
+static uint
+mii_send(uint mii_cmd)
+{
+	uint mii_reply;
+	volatile fec_t	*ep;
+
+	ep = &(((immap_t *)CFG_IMMR)->im_cpm.cp_fec);
+
+	ep->fec_mii_data = mii_cmd;	/* command to phy */
+
+	/* wait for mii complete */
+	while (!(ep->fec_ievent & FEC_ENET_MII))
+		;	/* spin until done */
+	mii_reply = ep->fec_mii_data;		/* result from phy */
+	ep->fec_ievent = FEC_ENET_MII;		/* clear MII complete */
+#if 0
+	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+		__FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
+#endif
+	return (mii_reply & 0xffff);		/* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+static void
+mii_discover_phy(void)
+{
+#define MAX_PHY_PASSES 11
+	uint phyno;
+	int  pass;
+
+	phyaddr = -1;	/* didn't find a PHY yet */
+	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+		if (pass > 1) {
+			/* PHY may need more time to recover from reset.
+			 * The LXT970 needs 50ms typical, no maximum is
+			 * specified, so wait 10ms before try again.
+			 * With 11 passes this gives it 100ms to wake up.
+			 */
+			udelay(10000);	/* wait 10ms */
+		}
+		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+			printf("PHY type 0x%x pass %d type ", phytype, pass);
+#endif
+			if (phytype != 0xffff) {
+				phyaddr = phyno;
+				phytype <<= 16;
+				phytype |= mii_send(mk_mii_read(phyno,
+								PHY_PHYIDR2));
+
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d type ",phyno,pass);
+				switch (phytype & 0xfffffff0) {
+				case PHY_ID_LXT970:
+					printf("LXT970\n");
+					break;
+				case PHY_ID_LXT971:
+					printf("LXT971\n");
+					break;
+				case PHY_ID_82555:
+					printf("82555\n");
+					break;
+				case PHY_ID_QS6612:
+					printf("QS6612\n");
+					break;
+				case PHY_ID_AMD79C784:
+					printf("AMD79C784\n");
+					break;
+				case PHY_ID_LSI80225B:
+					printf("LSI L80225/B\n");
+					break;
+				default:
+					printf("0x%08x\n", phytype);
+					break;
+				}
+#endif
+			}
+		}
+	}
+	if (phyaddr < 0) {
+		printf("No PHY device found.\n");
+	}
+}
+#endif	/* CFG_DISCOVER_PHY */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)
+
+static int mii_init_done = 0;
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	bd_t *bd = gd->bd;
+
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+	int i;
+
+	if (mii_init_done != 0) {
+		return;
+	}
+
+	/* Whack a reset.
+	 * A delay is required between a reset of the FEC block and
+	 * initialization of other FEC registers because the reset takes
+	 * some time to complete. If you don't delay, subsequent writes
+	 * to FEC registers might get killed by the reset routine which is
+	 * still in progress.
+	 */
+
+	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+	for (i = 0;
+	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+	     ++i) {
+		udelay (1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf ("FEC_RESET_DELAY timeout\n");
+		return;
+	}
+
+	/* We use strictly polling mode only
+	 */
+	fecp->fec_imask = 0;
+
+	/* Clear any pending interrupt
+	 */
+	fecp->fec_ievent = 0xffc0;
+
+	/* Set MII speed to 2.5 MHz or slightly below.
+	 * According to the MPC860T (Rev. D) Fast ethernet controller user
+	 * manual (6.2.14),
+	 * the MII management interface clock must be less than or equal
+	 * to 2.5 MHz.
+	 * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+	 * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
+	 */
+	fecp->fec_mii_speed = ((bd->bi_busfreq + 4999999) / 5000000) << 1;
+
+#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+	/* Configure all of port D for MII.
+	 */
+	immr->im_ioport.iop_pdpar = 0x1fff;
+
+	/* Bits moved from Rev. D onward */
+	if ((get_immr (0) & 0xffff) < 0x0501) {
+		immr->im_ioport.iop_pddir = 0x1c58;	/* Pre rev. D */
+	} else {
+		immr->im_ioport.iop_pddir = 0x1fff;	/* Rev. D and later */
+	}
+#else
+	/* Configure port A for MII.
+	*/
+
+#if defined(CONFIG_ICU862)
+
+	/* On the ICU862 board the MII-MDC pin is routed to PD8 pin
+	 * of CPU, so for this board we need to configure Utopia and
+	 * enable PD8 to MII-MDC function */
+	immr->im_ioport.iop_pdpar |= 0x4080;
+#endif
+
+	/* Has Utopia been configured? */
+	if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
+		/*
+		 * YES - Use MUXED mode for UTOPIA bus.
+		 * This frees Port A for use by MII (see 862UM table 41-6).
+		 */
+		immr->im_ioport.utmode &= ~0x80;
+	} else {
+		/*
+		 * NO - set SPLIT mode for UTOPIA bus.
+		 *
+		 * This doesn't really effect UTOPIA (which isn't
+		 * enabled anyway) but just tells the 862
+		 * to use port A for MII (see 862UM table 41-6).
+		 */
+		immr->im_ioport.utmode |= 0x80;
+	}
+#endif	/* !defined(CONFIG_ICU862) */
+	/* Now enable the transmit and receive processing
+	 */
+	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+
+	mii_init_done = 1;
+}
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *	  no PHY connected...
+ *	  For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *	  Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int miiphy_read(unsigned char addr, unsigned char  reg, unsigned short *value)
+{
+	short rdreg;    /* register working value */
+
+#ifdef MII_DEBUG
+	printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+	rdreg = mii_send(mk_mii_read(addr, reg));
+
+	*value = rdreg;
+
+#ifdef MII_DEBUG
+	printf ("0x%04x\n", *value);
+#endif
+
+	return 0;
+}
+
+int miiphy_write(unsigned char  addr, unsigned char  reg, unsigned short value)
+{
+	short rdreg;    /* register working value */
+
+#ifdef MII_DEBUG
+	printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+	rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+	printf ("0x%04x\n", value);
+#endif
+
+	return 0;
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)*/
+
+#endif	/* CFG_CMD_NET, FEC_ENET */
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
new file mode 100644
index 0000000000..f04d88e34e
--- /dev/null
+++ b/cpu/mpc8xx/spi.c
@@ -0,0 +1,571 @@
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ *	<nboppuri@trinetcommunication.com>,
+ *	<pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if (defined(CONFIG_SPI)) || (CONFIG_POST & CFG_POST_SPI)
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef	DEBUG
+
+#define SPI_EEPROM_WREN		0x06
+#define SPI_EEPROM_RDSR		0x05
+#define SPI_EEPROM_READ		0x03
+#define SPI_EEPROM_WRITE	0x02
+
+/* ---------------------------------------------------------------
+ * Offset for initial SPI buffers in DPRAM:
+ * We need a 520 byte scratch DPRAM area to use at an early stage.
+ * It is used between the two initialization calls (spi_init_f()
+ * and spi_init_r()).
+ * The value 0xb00 makes it far enough from the start of the data
+ * area (as well as from the stack pointer).
+ * --------------------------------------------------------------- */
+#ifndef	CFG_SPI_INIT_OFFSET
+#define	CFG_SPI_INIT_OFFSET	0xB00
+#endif
+
+#ifdef	DEBUG
+
+#define	DPRINT(a)	printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+	return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+	int i;
+	unsigned char *pc = (unsigned char *) pv;
+
+	for (i = 0; i < num; i++)
+		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+	printf ("\t");
+	for (i = 0; i < num; i++)
+		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+	printf ("\n");
+}
+#else	/* !DEBUG */
+
+#define	DPRINT(a)
+
+#endif	/* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+#define MAX_BUFFER	0x104
+
+/* ----------------------------------------------------------------------
+ * Initially we place the RX and TX buffers at a fixed location in DPRAM!
+ * ---------------------------------------------------------------------- */
+static uchar *rxbuf =
+  (uchar *)&((cpm8xx_t *)&((immap_t *)CFG_IMMR)->im_cpm)->cp_dpmem
+			[CFG_SPI_INIT_OFFSET];
+static uchar *txbuf =
+  (uchar *)&((cpm8xx_t *)&((immap_t *)CFG_IMMR)->im_cpm)->cp_dpmem
+			[CFG_SPI_INIT_OFFSET+MAX_BUFFER];
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_f
+ *
+ *  Description: Init SPI-Controller (ROM part)
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+void spi_init_f (void)
+{
+	unsigned int dpaddr;
+
+	volatile spi_t *spi;
+	volatile immap_t *immr;
+	volatile cpic8xx_t *cpi;
+	volatile cpm8xx_t *cp;
+	volatile iop8xx_t *iop;
+	volatile cbd_t *tbdf, *rbdf;
+
+	immr = (immap_t *)  CFG_IMMR;
+	cpi  = (cpic8xx_t *)&immr->im_cpic;
+	iop  = (iop8xx_t *) &immr->im_ioport;
+	cp   = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CFG_SPI_UCODE_PATCH
+	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+	/* Disable relocation */
+	spi->spi_rpbase = 0;
+#endif
+
+/* 1 */
+	/* ------------------------------------------------
+	 * Initialize Port B SPI pins -> page 34-8 MPC860UM
+	 * (we are only in Master Mode !)
+	 * ------------------------------------------------ */
+
+	/* --------------------------------------------
+	 * GPIO or per. Function
+	 * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
+	 * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
+	 * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
+	 * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
+	 * -------------------------------------------- */
+	cp->cp_pbpar |=  0x0000000E;	/* set  bits	*/
+	cp->cp_pbpar &= ~0x00000001;	/* reset bit	*/
+
+	/* ----------------------------------------------
+	 * In/Out or per. Function 0/1
+	 * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
+	 * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
+	 * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
+	 * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
+	 * ---------------------------------------------- */
+	cp->cp_pbdir |= 0x0000000F;
+
+	/* ----------------------------------------------
+	 * open drain or active output
+	 * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
+	 * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
+	 * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
+	 * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
+	 * ---------------------------------------------- */
+
+	cp->cp_pbodr |=  0x00000008;
+	cp->cp_pbodr &= ~0x00000007;
+
+	/* Initialize the parameter ram.
+	 * We need to make sure many things are initialized to zero
+	 */
+	spi->spi_rstate	= 0;
+	spi->spi_rdp	= 0;
+	spi->spi_rbptr	= 0;
+	spi->spi_rbc	= 0;
+	spi->spi_rxtmp	= 0;
+	spi->spi_tstate	= 0;
+	spi->spi_tdp	= 0;
+	spi->spi_tbptr	= 0;
+	spi->spi_tbc	= 0;
+	spi->spi_txtmp	= 0;
+
+	/* Allocate space for one transmit and one receive buffer
+	 * descriptor in the DP ram
+	 */
+#ifdef CFG_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
+#else
+	dpaddr = CPM_SPI_BASE;
+#endif
+
+/* 3 */
+	/* Set up the SPI parameters in the parameter ram */
+	spi->spi_rbase = dpaddr;
+	spi->spi_tbase = dpaddr + sizeof (cbd_t);
+
+	/***********IMPORTANT******************/
+
+        /*
+         * Setting transmit and receive buffer descriptor pointers
+         * initially to rbase and tbase. Only the microcode patches
+         * documentation talks about initializing this pointer. This
+         * is missing from the sample I2C driver. If you dont
+         * initialize these pointers, the kernel hangs.
+	 */
+	spi->spi_rbptr = spi->spi_rbase;
+	spi->spi_tbptr = spi->spi_tbase;
+
+/* 4 */
+#ifdef CFG_SPI_UCODE_PATCH
+	/*
+	 *  Initialize required parameters if using microcode patch.
+	 */
+	spi->spi_rstate = 0;
+	spi->spi_tstate = 0;
+#else
+	/* Init SPI Tx + Rx Parameters */
+	while (cp->cp_cpcr & CPM_CR_FLG)
+		;
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG)
+		;
+#endif	/* CFG_SPI_UCODE_PATCH */
+
+/* 5 */
+	/* Set SDMA configuration register */
+	immr->im_siu_conf.sc_sdcr = 0x0001;
+
+/* 6 */
+	/* Set to big endian. */
+	spi->spi_tfcr = SMC_EB;
+	spi->spi_rfcr = SMC_EB;
+
+/* 7 */
+	/* Set maximum receive size. */
+	spi->spi_mrblr = MAX_BUFFER;
+
+/* 8 + 9 */
+	/* tx and rx buffer descriptors */
+	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+	tbdf->cbd_sc &= ~BD_SC_READY;
+	rbdf->cbd_sc &= ~BD_SC_EMPTY;
+
+	/* Set the bd's rx and tx buffer address pointers */
+	rbdf->cbd_bufaddr = (ulong) rxbuf;
+	tbdf->cbd_bufaddr = (ulong) txbuf;
+
+/* 10 + 11 */
+	cp->cp_spim = 0;			/* Mask  all SPI events */
+	cp->cp_spie = SPI_EMASK;		/* Clear all SPI events	*/
+
+	return;
+}
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_r
+ *
+ *  Description: Init SPI-Controller (RAM part) -
+ *		 The malloc engine is ready and we can move our buffers to
+ *		 normal RAM
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+	volatile cpm8xx_t *cp;
+	volatile spi_t *spi;
+	volatile immap_t *immr;
+	volatile cbd_t *tbdf, *rbdf;
+
+	immr = (immap_t *)  CFG_IMMR;
+	cp   = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CFG_SPI_UCODE_PATCH
+	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+	/* Disable relocation */
+	spi->spi_rpbase = 0;
+#endif
+
+	/* tx and rx buffer descriptors */
+	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+	/* Allocate memory for RX and TX buffers */
+	rxbuf = (uchar *) malloc (MAX_BUFFER);
+	txbuf = (uchar *) malloc (MAX_BUFFER);
+
+	rbdf->cbd_bufaddr = (ulong) rxbuf;
+	tbdf->cbd_bufaddr = (ulong) txbuf;
+
+	return;
+}
+
+/****************************************************************************
+ *  Function:    spi_write
+ **************************************************************************** */
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int i;
+
+	memset(rxbuf, 0, MAX_BUFFER);
+	memset(txbuf, 0, MAX_BUFFER);
+	*txbuf = SPI_EEPROM_WREN;		/* write enable		*/
+	spi_xfer(1);
+	memcpy(txbuf, addr, alen);
+	*txbuf = SPI_EEPROM_WRITE;		/* WRITE memory array	*/
+	memcpy(alen + txbuf, buffer, len);
+	spi_xfer(alen + len);
+						/* ignore received data	*/
+	for (i = 0; i < 1000; i++) {
+		*txbuf = SPI_EEPROM_RDSR;	/* read status		*/
+		txbuf[1] = 0;
+		spi_xfer(2);
+		if (!(rxbuf[1] & 1)) {
+			break;
+		}
+		udelay(1000);
+	}
+	if (i >= 1000) {
+		printf ("*** spi_write: Time out while writing!\n");
+	}
+
+	return len;
+}
+
+/****************************************************************************
+ *  Function:    spi_read
+ **************************************************************************** */
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+	memset(rxbuf, 0, MAX_BUFFER);
+	memset(txbuf, 0, MAX_BUFFER);
+	memcpy(txbuf, addr, alen);
+	*txbuf = SPI_EEPROM_READ;		/* READ memory array	*/
+
+	/*
+	 * There is a bug in 860T (?) that cuts the last byte of input
+	 * if we're reading into DPRAM. The solution we choose here is
+	 * to always read len+1 bytes (we have one extra byte at the
+	 * end of the buffer).
+	 */
+	spi_xfer(alen + len + 1);
+	memcpy(buffer, alen + rxbuf, len);
+
+	return len;
+}
+
+/****************************************************************************
+ *  Function:    spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+	volatile immap_t *immr;
+	volatile cpm8xx_t *cp;
+	volatile spi_t *spi;
+	cbd_t *tbdf, *rbdf;
+	ushort loop;
+	int tm;
+
+	DPRINT (("*** spi_xfer entered ***\n"));
+
+	immr = (immap_t *) CFG_IMMR;
+	cp   = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CFG_SPI_UCODE_PATCH
+	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+	/* Disable relocation */
+	spi->spi_rpbase = 0;
+#endif
+
+	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+	/* Set CS for device */
+	cp->cp_pbdat &= ~0x0001;
+
+	/* Setting tx bd status and data length */
+	tbdf->cbd_sc  = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
+	tbdf->cbd_datlen = count;
+
+	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
+							tbdf->cbd_datlen));
+
+	/* Setting rx bd status and data length */
+	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+	rbdf->cbd_datlen = 0;	 /* rx length has no significance */
+
+	loop = cp->cp_spmode & SPMODE_LOOP;
+	cp->cp_spmode = /*SPMODE_DIV16	|*/	/* BRG/16 mode not used here */
+			loop		|
+			SPMODE_REV	|
+			SPMODE_MSTR	|
+			SPMODE_EN	|
+			SPMODE_LEN(8)	|	/* 8 Bits per char */
+			SPMODE_PM(0x8) ;	/* medium speed */
+	cp->cp_spim = 0;			/* Mask  all SPI events */
+	cp->cp_spie = SPI_EMASK;		/* Clear all SPI events	*/
+
+	/* start spi transfer */
+	DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+	cp->cp_spcom |= SPI_STR;		/* Start transmit */
+
+	/* --------------------------------
+	 * Wait for SPI transmit to get out
+	 * or time out (1 second = 1000 ms)
+	 * -------------------------------- */
+	for (tm=0; tm<1000; ++tm) {
+		if (cp->cp_spie & SPI_TXB) {	/* Tx Buffer Empty */
+			DPRINT (("*** spi_xfer: Tx buffer empty\n"));
+			break;
+		}
+		if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
+			DPRINT (("*** spi_xfer: Tx BD done\n"));
+			break;
+		}
+		udelay (1000);
+	}
+	if (tm >= 1000) {
+		printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+	}
+	DPRINT (("*** spi_xfer: ... transfer ended\n"));
+
+#ifdef	DEBUG
+	printf ("\nspi_xfer: txbuf after xfer\n");
+	memdump ((void *) txbuf, 16);	/* dump of txbuf before transmit */
+	printf ("spi_xfer: rxbuf after xfer\n");
+	memdump ((void *) rxbuf, 16);	/* dump of rxbuf after transmit */
+	printf ("\n");
+#endif
+
+	/* Clear CS for device */
+	cp->cp_pbdat |= 0x0001;
+
+	return count;
+}
+#endif	/* CONFIG_SPI || (CONFIG_POST & CFG_POST_SPI) */
+
+/*
+ * SPI test
+ *
+ * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
+ * The interface is configured accordingly and several packets
+ * are transfered. The configurable test parameters are:
+ *   TEST_MIN_LENGTH - minimum size of packet to transfer
+ *   TEST_MAX_LENGTH - maximum size of packet to transfer
+ *   TEST_NUM - number of tests
+ */
+
+#if CONFIG_POST & CFG_POST_SPI
+
+#define TEST_MIN_LENGTH		1
+#define TEST_MAX_LENGTH		MAX_BUFFER
+#define TEST_NUM		1
+
+static void packet_fill (char * packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 0; i < length; i++)
+	{
+	    packet[i] = c++;
+	}
+}
+
+static int packet_check (char * packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 0; i < length; i++)
+	{
+	    if (packet[i] != c++) return -1;
+	}
+
+	return 0;
+}
+
+int spi_post_test (int flags)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int res = -1;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = (cpm8xx_t *) &immr->im_cpm;
+	int i;
+	int l;
+
+	spi_init_f();
+	spi_init_r();
+
+	cp->cp_spmode |= SPMODE_LOOP;
+
+	for (i = 0; i < TEST_NUM; i++)
+	{
+	    for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8)
+	    {
+		packet_fill(txbuf, l);
+
+		spi_xfer(l);
+
+		if (packet_check(rxbuf, l) < 0)
+		{
+		    goto Done;
+		}
+	    }
+	}
+
+	res = 0;
+
+	Done:
+
+	cp->cp_spmode &= ~SPMODE_LOOP;
+
+	/*
+	 * SCC2 Ethernet parameter RAM space overlaps
+	 * the SPI parameter RAM space. So we need to restore
+	 * the SCC2 configuration if it is used by UART or Ethernet.
+	 */
+
+#if defined(CONFIG_8xx_CONS_SCC2)
+	serial_init();
+#endif
+
+#if defined(SCC_ENET) && (SCC_ENET == 1)
+	eth_init(gd->bd);
+#endif
+
+	if (res != 0)
+	{
+		post_log("SPI test failed\n");
+	}
+
+	return res;
+}
+#endif	/* CONFIG_POST & CFG_POST_SPI */