Cleanup whitespaces and style issues.

Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.

9 files changed, 339 insertions, 411 deletions

diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index b0fe8abb2c..36da7774ea 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -32,31 +32,30 @@
 #include <ft_build.h>
 #endif
 
+extern unsigned long get_board_sys_clk(ulong dummy);
 
-// SS: For debug only, remove after use
 
 static __inline__ unsigned long get_dbat3u (void)
 {
-   unsigned long dbat3u;
-   asm volatile("mfspr %0, 542" : "=r" (dbat3u) :);
-   return dbat3u;
+	unsigned long dbat3u;
+	asm volatile("mfspr %0, 542" : "=r" (dbat3u) :);
+	return dbat3u;
 }
 
 static __inline__ unsigned long get_dbat3l (void)
 {
-   unsigned long dbat3l;
-   asm volatile("mfspr %0, 543" : "=r" (dbat3l) :);
-   return dbat3l;
+	unsigned long dbat3l;
+	asm volatile("mfspr %0, 543" : "=r" (dbat3l) :);
+	return dbat3l;
 }
 
 static __inline__ unsigned long get_msr (void)
 {
-   unsigned long msr;
-   asm volatile("mfmsr %0" : "=r" (msr) :);
-   return msr;
+	unsigned long msr;
+	asm volatile("mfmsr %0" : "=r" (msr) :);
+	return msr;
 }
 
-extern unsigned long get_board_sys_clk(ulong dummy);
 
 int checkcpu (void)
 {
@@ -66,7 +65,7 @@ int checkcpu (void)
 	uint major, minor;
 	uint lcrr;		/* local bus clock ratio register */
 	uint clkdiv;		/* clock divider portion of lcrr */
-	
+
 	puts("Freescale PowerPC\n");
 
 	pvr = get_pvr();
@@ -74,10 +73,10 @@ int checkcpu (void)
 	major = PVR_MAJ(pvr);
 	minor = PVR_MIN(pvr);
 
-	puts ("CPU:\n");
+	puts("CPU:\n");
 
 	printf("    Core: ");
-	
+
 	switch (ver) {
 	case PVR_VER(PVR_86xx):
 	    puts("E600");
@@ -94,7 +93,7 @@ int checkcpu (void)
 	minor = SVR_MIN(svr);
 
 	puts("    System: ");
-	switch (ver) {	
+	switch (ver) {
 	case SVR_8641:
 	        puts("8641");
 	        break;
@@ -113,7 +112,7 @@ int checkcpu (void)
 	printf("CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
 	printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000);
 	printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
-        	
+
 #if defined(CFG_LBC_LCRR)
 	lcrr = CFG_LBC_LCRR;
 #else
@@ -134,11 +133,11 @@ int checkcpu (void)
 
         printf("    L2: ");
         if (get_l2cr() & 0x80000000)
-           printf("Enabled\n");
+		printf("Enabled\n");
         else
-           printf("Disabled\n");
-        
-	return (0);
+		printf("Disabled\n");
+
+	return 0;
 }
 
 
@@ -149,7 +148,7 @@ soft_restart(unsigned long addr)
 {
 
 #ifndef CONFIG_MPC8641HPCN
-   
+
 	/* SRR0 has system reset vector, SRR1 has default MSR value */
 	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
 
@@ -215,7 +214,7 @@ int set_px_sysclk(ulong sysclk)
                sysclk_s = 0x06;
                sysclk_r = 0x1F;
                sysclk_v = 0x3B;
-              sysclk_aux = 0x06; 
+              sysclk_aux = 0x06;
                break;
             case 166:
                sysclk_s = 0x06;
@@ -227,14 +226,14 @@ int set_px_sysclk(ulong sysclk)
                printf("Unsupported SYSCLK frequency.\n");
                return 0;
          }
-         
+
          vclkh = (sysclk_s << 5) | sysclk_r ;
          vclkl = sysclk_v;
          out8(PIXIS_BASE+PIXIS_VCLKH,vclkh);
          out8(PIXIS_BASE+PIXIS_VCLKL,vclkl);
 
          out8(PIXIS_BASE+PIXIS_AUX,sysclk_aux);
-         
+
          return 1;
 }
 
@@ -262,7 +261,7 @@ int set_px_mpxpll(ulong mpxpll)
          tmp = in8(PIXIS_BASE+PIXIS_VSPEED1);
          tmp = (tmp & 0xF0) | (val & 0x0F);
          out8(PIXIS_BASE+PIXIS_VSPEED1,tmp);
-         
+
          return 1;
 }
 
@@ -270,9 +269,8 @@ int set_px_corepll(ulong corepll)
 {
          u8 tmp;
          u8 val;
-        
-         switch((int)corepll)
-         {
+
+         switch ((int)corepll) {
             case 20:
                val = 0x08;
                break;
@@ -295,11 +293,11 @@ int set_px_corepll(ulong corepll)
                printf("Unsupported COREPLL ratio.\n");
                return 0;
          }
-         
+
          tmp = in8(PIXIS_BASE+PIXIS_VSPEED0);
          tmp = (tmp & 0xE0) | (val & 0x1F);
          out8(PIXIS_BASE+PIXIS_VSPEED0,tmp);
-         
+
          return 1;
 }
 
@@ -311,7 +309,7 @@ void read_from_px_regs(int set)
             tmp = tmp | mask;
          else
             tmp = tmp & ~mask;
-         out8(PIXIS_BASE+PIXIS_VCFGEN0,tmp);                        
+         out8(PIXIS_BASE+PIXIS_VCFGEN0,tmp);
 }
 
 void read_from_px_regs_altbank(int set)
@@ -322,7 +320,7 @@ void read_from_px_regs_altbank(int set)
             tmp = tmp | mask;
          else
             tmp = tmp & ~mask;
-         out8(PIXIS_BASE+PIXIS_VCFGEN1,tmp);   
+         out8(PIXIS_BASE+PIXIS_VCFGEN1,tmp);
 }
 
 void set_altbank(void)
@@ -342,7 +340,7 @@ void set_px_go(void)
          out8(PIXIS_BASE+PIXIS_VCTL,tmp);
          tmp = in8(PIXIS_BASE+PIXIS_VCTL);
          tmp = tmp | 0x01;
-         out8(PIXIS_BASE+PIXIS_VCTL,tmp); 
+         out8(PIXIS_BASE+PIXIS_VCTL,tmp);
 }
 
 void set_px_go_with_watchdog(void)
@@ -353,7 +351,7 @@ void set_px_go_with_watchdog(void)
          out8(PIXIS_BASE+PIXIS_VCTL,tmp);
          tmp = in8(PIXIS_BASE+PIXIS_VCTL);
          tmp = tmp | 0x09;
-         out8(PIXIS_BASE+PIXIS_VCTL,tmp); 
+         out8(PIXIS_BASE+PIXIS_VCTL,tmp);
 }
 
 /* This function takes the non-integral cpu:mpx pll ratio
@@ -381,11 +379,11 @@ ulong strfractoint(uchar *strptr)
          no_dec = 1;
          break;    /* Break from loop once the end of string is reached */
       }
-      
+
       intarr[i] = strptr[i];
       i++;
    }
-   
+
    intarr_len = i; /* Assign length of integer part to intarr_len*/
    intarr[i] = '\0'; /* */
 
@@ -404,14 +402,14 @@ ulong strfractoint(uchar *strptr)
          i++;
          j++;
       }
-      
+
       decarr_len = j;
       decarr[j] = '\0';
-      
+
       mulconst=1;
       for(i=0; i<decarr_len;i++)
          mulconst = mulconst*10;
-      decval = simple_strtoul(decarr,NULL,10);      
+      decval = simple_strtoul(decarr,NULL,10);
    }
 
    intval = simple_strtoul(intarr,NULL,10);
@@ -422,9 +420,9 @@ ulong strfractoint(uchar *strptr)
    return retval;
 
 }
-   
 
-#endif //CONFIG_MPC8641HPCN
+
+#endif	/* CONFIG_MPC8641HPCN */
 
 
 /* no generic way to do board reset. simply call soft_reset. */
@@ -434,8 +432,6 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
         char cmd;
         ulong addr, val;
         ulong corepll;
-        
-                
 
 #ifdef CFG_RESET_ADDRESS
 	addr = CFG_RESET_ADDRESS;
@@ -451,7 +447,7 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 #ifndef CONFIG_MPC8641HPCN
 
-       /* flush and disable I/D cache */
+	/* flush and disable I/D cache */
 	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
 	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
 	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
@@ -467,97 +463,85 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
         soft_restart(addr);
 
 #else /* CONFIG_MPC8641HPCN */
-        
-        if(argc > 1)
-        {
-           cmd = argv[1][1];
-           switch(cmd)
-           {
-              case 'f':    /* reset with frequency changed */
-
-                 if (argc < 5)
-                    goto my_usage;
-                 
-                 read_from_px_regs(0);
-                 
-                 val = set_px_sysclk(simple_strtoul(argv[2],NULL,10));
-                 
-                 corepll = strfractoint(argv[3]);
-                 val = val + set_px_corepll(corepll);
-                 val = val + set_px_mpxpll(simple_strtoul(argv[4],NULL,10));
-                 if(val == 3)
-                 {
-                    printf("Setting registers VCFGEN0 and VCTL\n");
-                    read_from_px_regs(1);
-                    printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
-                    set_px_go();
-                 }
-                 else
-                    goto my_usage;
-                 
-                 while(1); /* Not reached */
-                 
-              case 'l':
-                 if(argv[2][1] == 'f')
-                 {
-                    read_from_px_regs(0);
-                    read_from_px_regs_altbank(0);
-                    /* reset with frequency changed */
-                    val = set_px_sysclk(simple_strtoul(argv[3],NULL,10));
-                    
-                    corepll = strfractoint(argv[4]);
-                    val = val + set_px_corepll(corepll);
-                    val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10));
-                    if(val == 3)
-                    {
-                       printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
-                       set_altbank();
-                       read_from_px_regs(1);
-                       read_from_px_regs_altbank(1);
-                       printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
-                       set_px_go_with_watchdog();
-                       
-                    }
-                    else
-                       goto my_usage;
-                 
-                    while(1); /* Not reached */
-                 }
-                 else /* Reset from next bank without changing frequencies */
-                 {
-                    read_from_px_regs(0);
-                    read_from_px_regs_altbank(0);
-                    if(argc > 2)
-                       goto my_usage;
-                    printf("Setting registers VCFGEN1, VBOOT, and VCTL\n");
-                    set_altbank();
-                    read_from_px_regs_altbank(1);
-                    printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
-                    set_px_go_with_watchdog();
-                    while(1); /* Not reached */
-                 }
-
-              default:
-                 goto my_usage;
-           }
+
+        if (argc > 1) {
+		cmd = argv[1][1];
+		switch(cmd) {
+		case 'f':    /* reset with frequency changed */
+			if (argc < 5)
+				goto my_usage;
+			read_from_px_regs(0);
+
+			val = set_px_sysclk(simple_strtoul(argv[2],NULL,10));
+
+			corepll = strfractoint(argv[3]);
+			val = val + set_px_corepll(corepll);
+			val = val + set_px_mpxpll(simple_strtoul(argv[4],
+								 NULL, 10));
+			if (val == 3) {
+				printf("Setting registers VCFGEN0 and VCTL\n");
+				read_from_px_regs(1);
+				printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
+				set_px_go();
+			} else
+				goto my_usage;
+
+			while (1); /* Not reached */
+
+		case 'l':
+			if (argv[2][1] == 'f') {
+				read_from_px_regs(0);
+				read_from_px_regs_altbank(0);
+				/* reset with frequency changed */
+				val = set_px_sysclk(simple_strtoul(argv[3],NULL,10));
+
+				corepll = strfractoint(argv[4]);
+				val = val + set_px_corepll(corepll);
+				val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10));
+				if (val == 3) {
+					printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
+					set_altbank();
+					read_from_px_regs(1);
+					read_from_px_regs_altbank(1);
+					printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
+					set_px_go_with_watchdog();
+				} else
+					goto my_usage;
+
+				while(1); /* Not reached */
+			} else {
+				/* Reset from next bank without changing frequencies */
+				read_from_px_regs(0);
+				read_from_px_regs_altbank(0);
+				if(argc > 2)
+					goto my_usage;
+				printf("Setting registers VCFGEN1, VBOOT, and VCTL\n");
+				set_altbank();
+				read_from_px_regs_altbank(1);
+				printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
+				set_px_go_with_watchdog();
+				while(1); /* Not reached */
+			}
+
+		default:
+			goto my_usage;
+		}
+
 my_usage:
-           printf("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
-           printf("       reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
-           printf("For example:   reset cf 40 2.5 10\n");
-           printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
-           return;
-        }
-        else
-           out8(PIXIS_BASE+PIXIS_RST,0);
-           
+		printf("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
+		printf("       reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
+		printf("For example:   reset cf 40 2.5 10\n");
+		printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
+		return;
+        } else
+		out8(PIXIS_BASE+PIXIS_RST,0);
+
 #endif /* !CONFIG_MPC8641HPCN */
-        
+
 	while(1);	/* not reached */
 }
 
 
-/* ------------------------------------------------------------------------- */
-
 /*
  * Get timebase clock frequency
  */
@@ -566,24 +550,21 @@ unsigned long get_tbclk(void)
 	sys_info_t  sys_info;
 
 	get_sys_info(&sys_info);
-	return ((sys_info.freqSystemBus + 3L) / 4L);
-
+	return (sys_info.freqSystemBus + 3L) / 4L;
 }
 
-/* ------------------------------------------------------------------------- */
 
 #if defined(CONFIG_WATCHDOG)
 void
 watchdog_reset(void)
 {
-
 }
 #endif	/* CONFIG_WATCHDOG */
 
-/* ------------------------------------------------------------------------- */
 
 #if defined(CONFIG_DDR_ECC)
-void dma_init(void) {
+void dma_init(void)
+{
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
 
@@ -593,7 +574,8 @@ void dma_init(void) {
 	return;
 }
 
-uint dma_check(void) {
+uint dma_check(void)
+{
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
 	volatile uint status = dma->sr0;
@@ -609,7 +591,8 @@ uint dma_check(void) {
 	return status;
 }
 
-int dma_xfer(void *dest, uint count, void *src) {
+int dma_xfer(void *dest, uint count, void *src)
+{
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
 
@@ -622,6 +605,7 @@ int dma_xfer(void *dest, uint count, void *src) {
 	asm("sync;isync");
 	return dma_check();
 }
+
 #endif	/* CONFIG_DDR_ECC */
 
 
@@ -631,7 +615,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	u32 *p;
 	ulong clock;
 	int len;
-  
+
 	clock = bd->bi_busfreq;
 	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
 	if (p != NULL)
@@ -649,7 +633,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len);
 	memcpy(p, bd->bi_enetaddr, 6);
 #endif
- 
+
 #if defined(CONFIG_MPC86XX_TSEC2)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len);
 	memcpy(p, bd->bi_enet1addr, 6);
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 582ac6ba95..c816c18974 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -36,13 +36,12 @@
  * initialize a bunch of registers
  */
 
-void cpu_init_f (void)
+void cpu_init_f(void)
 {
         DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-        //u8 val;
-        
+
         /* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
 
@@ -72,23 +71,21 @@ void cpu_init_f (void)
 	memctl->br1 = CFG_BR1_PRELIM;
 #endif
 
-        //#if !defined(CONFIG_MPC86xx)
 #if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
 	memctl->or2 = CFG_OR2_PRELIM;
 	memctl->br2 = CFG_BR2_PRELIM;
 #endif
-        //#endif
-	
+
 #if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
 	memctl->or3 = CFG_OR3_PRELIM;
 	memctl->br3 = CFG_BR3_PRELIM;
 #endif
-	
+
 #if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
 	memctl->or4 = CFG_OR4_PRELIM;
 	memctl->br4 = CFG_BR4_PRELIM;
 #endif
-	
+
 #if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
 	memctl->or5 = CFG_OR5_PRELIM;
 	memctl->br5 = CFG_BR5_PRELIM;
@@ -123,9 +120,9 @@ void cpu_init_f (void)
 /*
  * initialize higher level parts of CPU like timers
  */
-int cpu_init_r (void)
+int cpu_init_r(void)
 {
-	return (0);
+	return 0;
 }
 
 
diff --git a/cpu/mpc86xx/i2c.c b/cpu/mpc86xx/i2c.c
index c5d4642b9a..f2b4b0f6da 100644
--- a/cpu/mpc86xx/i2c.c
+++ b/cpu/mpc86xx/i2c.c
@@ -74,29 +74,27 @@ i2c_init(int speed, int slaveadd)
 }
 
 static __inline__ int
-i2c_wait4bus (void)
+i2c_wait4bus(void)
 {
 	ulong timeval = get_timer (0);
 
-        //        debug("I2C: Wait for bus\n");
 	while (readb(I2CCSR) & MPC86xx_I2CSR_MBB) {
-		if (get_timer (timeval) > TIMEOUT) {
+		if (get_timer(timeval) > TIMEOUT) {
 			return -1;
 		}
 	}
 
-  return 0;
+	return 0;
 }
 
 static __inline__ int
-i2c_wait (int write)
+i2c_wait(int write)
 {
 	u32 csr;
 	ulong timeval = get_timer (0);
 
 	do {
 		csr = readb(I2CCSR);
-
 		if (!(csr & MPC86xx_I2CSR_MIF))
 			continue;
 
@@ -118,7 +116,7 @@ i2c_wait (int write)
 		}
 
 		return 0;
-	} while (get_timer (timeval) < TIMEOUT);
+	} while (get_timer(timeval) < TIMEOUT);
 
 	debug("i2c_wait: timed out\n");
 	return -1;
@@ -127,14 +125,13 @@ i2c_wait (int write)
 static __inline__ int
 i2c_write_addr (u8 dev, u8 dir, int rsta)
 {
-   //        debug("I2C: Write Addr\n");
-	writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX |
-	       (rsta?MPC86xx_I2CCR_RSTA:0),
+	writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX
+	       | (rsta ? MPC86xx_I2CCR_RSTA : 0),
 	       I2CCCR);
 
 	writeb((dev << 1) | dir, I2CCDR);
 
-	if (i2c_wait (I2C_WRITE) < 0)
+	if (i2c_wait(I2C_WRITE) < 0)
 		return 0;
 
 	return 1;
@@ -144,14 +141,14 @@ static __inline__ int
 __i2c_write (u8 *data, int length)
 {
 	int i;
-        //        debug("I2C: __i2c_write\n");
+
 	writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX,
 	       I2CCCR);
 
-	for (i=0; i < length; i++) {
+	for (i = 0; i < length; i++) {
 		writeb(data[i], I2CCDR);
 
-		if (i2c_wait (I2C_WRITE) < 0)
+		if (i2c_wait(I2C_WRITE) < 0)
 			break;
 	}
 
@@ -163,33 +160,30 @@ __i2c_read (u8 *data, int length)
 {
 	int i;
 
-	writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA |
-	       ((length == 1) ? MPC86xx_I2CCR_TXAK : 0),
+	writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA
+	       | ((length == 1) ? MPC86xx_I2CCR_TXAK : 0),
 	       I2CCCR);
 
 	/* dummy read */
 	readb(I2CCDR);
-        //        debug("length = %d\n", length);
 
-	for (i=0; i < length; i++) {
-		if (i2c_wait (I2C_READ) < 0)
+	for (i = 0; i < length; i++) {
+		if (i2c_wait(I2C_READ) < 0)
 			break;
 
 		/* Generate ack on last next to last byte */
 		if (i == length - 2)
-			writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA |
-			       MPC86xx_I2CCR_TXAK,
+			writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA
+			       | MPC86xx_I2CCR_TXAK,
 			       I2CCCR);
 
 		/* Generate stop on last byte */
 		if (i == length - 1)
 			writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_TXAK, I2CCCR);
 
-                //      debug("I2CCR = 0x%08x\n", readb(I2CCCR));
 		data[i] = readb(I2CCDR);
-                //                debug("data[i] = 0x%08x\n", data[i]);
 	}
-        //        debug("Returning i = %d\n", i);
+
 	return i;
 }
 
@@ -199,19 +193,19 @@ i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
 	int i = 0;
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus () < 0)
+	if (i2c_wait4bus() < 0)
 		goto exit;
 
-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+	if (i2c_write_addr(dev, I2C_WRITE, 0) == 0)
 		goto exit;
 
-	if (__i2c_write (&a[4 - alen], alen) != alen)
+	if (__i2c_write(&a[4 - alen], alen) != alen)
 		goto exit;
 
-	if (i2c_write_addr (dev, I2C_READ, 1) == 0)
+	if (i2c_write_addr(dev, I2C_READ, 1) == 0)
 		goto exit;
 
-	i = __i2c_read (data, length);
+	i = __i2c_read(data, length);
 
  exit:
 	writeb(MPC86xx_I2CCR_MEN, I2CCCR);
@@ -225,16 +219,16 @@ i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
 	int i = 0;
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus () < 0)
+	if (i2c_wait4bus() < 0)
 		goto exit;
 
-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+	if (i2c_write_addr(dev, I2C_WRITE, 0) == 0)
 		goto exit;
 
-	if (__i2c_write (&a[4 - alen], alen) != alen)
+	if (__i2c_write(&a[4 - alen], alen) != alen)
 		goto exit;
 
-	i = __i2c_write (data, length);
+	i = __i2c_write(data, length);
 
  exit:
 	writeb(MPC86xx_I2CCR_MEN, I2CCCR);
@@ -253,21 +247,21 @@ int i2c_probe (uchar chip)
 	 */
 	udelay(10000);
 
-	return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+	return i2c_read(chip, 0, 1, (char *)&tmp, 1);
 }
 
 uchar i2c_reg_read (uchar i2c_addr, uchar reg)
 {
 	char buf[1];
 
-	i2c_read (i2c_addr, reg, 1, buf, 1);
+	i2c_read(i2c_addr, reg, 1, buf, 1);
 
-	return (buf[0]);
+	return buf[0];
 }
 
 void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
 {
-	i2c_write (i2c_addr, reg, 1, &val, 1);
+	i2c_write(i2c_addr, reg, 1, &val, 1);
 }
 
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c
index 759a30f9f0..b5cd439e53 100644
--- a/cpu/mpc86xx/interrupts.c
+++ b/cpu/mpc86xx/interrupts.c
@@ -75,7 +75,7 @@ static __inline__ void set_dec (unsigned long val)
 /* interrupt is not supported yet */
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-   return (0);
+   return 0;
 }
 
 
@@ -91,14 +91,14 @@ int interrupt_init (void)
 
         decrementer_count = get_tbclk()/CFG_HZ;
         debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n", (get_tbclk()/1000000), decrementer_count);
-        
+
         set_dec (decrementer_count);
 
 	set_msr (get_msr () | MSR_EE);
 
         debug("MSR = 0x%08lx, Decrementer reg = 0x%08lx\n", get_msr(), get_dec());
-        
-	return (0);
+
+	return 0;
 }
 
 
@@ -113,7 +113,7 @@ int disable_interrupts (void)
 	ulong msr = get_msr ();
 
 	set_msr (msr & ~MSR_EE);
-	return ((msr & MSR_EE) != 0);
+	return (msr & MSR_EE) != 0;
 }
 
 
@@ -131,7 +131,6 @@ void
 timer_interrupt_cpu (struct pt_regs *regs)
 {
 	/* nothing to do here */
-	return;
 }
 
 
@@ -139,14 +138,14 @@ void timer_interrupt (struct pt_regs *regs)
 {
    /* call cpu specific function from $(CPU)/interrupts.c */
    timer_interrupt_cpu (regs);
-        
+
    timestamp++;
 
    ppcDcbf(&timestamp);
-   
+
    /* Restore Decrementer Count */
    set_dec (decrementer_count);
-        
+
 #if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
 	if ((timestamp % (CFG_WATCHDOG_FREQ)) == 0)
 		WATCHDOG_RESET ();
@@ -169,8 +168,8 @@ void reset_timer (void)
 }
 
 ulong get_timer (ulong base)
-{  
- 	return (timestamp - base);
+{
+ 	return timestamp - base;
 }
 
 void set_timer (ulong t)
@@ -185,13 +184,11 @@ void set_timer (ulong t)
 void
 irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
 {
-	return;
 }
 
 void
 irq_free_handler(int vec)
 {
-	return;
 }
 
 
diff --git a/cpu/mpc86xx/pci.c b/cpu/mpc86xx/pci.c
index 9cf5f7ca95..05976bdd4b 100644
--- a/cpu/mpc86xx/pci.c
+++ b/cpu/mpc86xx/pci.c
@@ -22,7 +22,7 @@
  */
 
 /*
- * PEX Configuration space access support for MPC85xx PEX Bridge
+ * PEX Configuration space access support for PEX Bridge
  */
 #include <common.h>
 #include <pci.h>
@@ -44,24 +44,25 @@ pci_mpc86xx_init(struct pci_controller *hose)
 
         ulong addr, data;
 
-        
         uint pex1_agent =  (host1_agent == 0) || (host1_agent == 1);
         uint devdisr = gur->devdisr;
         uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
-        
-        if ((io_sel==2 || io_sel==3 || io_sel==5 || io_sel==6 || io_sel==7 || io_sel==0xF ) && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){
+
+        if ((io_sel==2 || io_sel==3 || io_sel==5
+	     || io_sel==6 || io_sel==7 || io_sel==0xF )
+	    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){
                 printf ("PCI-EXPRESS 1: Configured as %s \n",
                         pex1_agent ? "Agent" : "Host");
                 printf ("               Scanning PCI bus");
                 debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det);
                 if (pex1->pme_msg_det) {
                         pex1->pme_msg_det = 0xffffffff;
-                        debug (" with errors.  Clearing.  Now 0x%08x",pex1->pme_msg_det);
+                        debug (" with errors.  Clearing.  Now 0x%08x",
+			       pex1->pme_msg_det);
                 }
                 debug ("\n");
         }
-        
-        
+
 	hose->first_busno = 0;
 	hose->last_busno = 0x7f;
 
@@ -88,36 +89,26 @@ pci_mpc86xx_init(struct pci_controller *hose)
 	 */
 	pci_register_hose(hose);
 
-        //#define MPC8548_REV1_PEX12_ERRATA
-#ifdef MPC8548_REV1_PEX12_ERRATA
-	/* can only read/write 4 bytes */
-	pci_read_config_dword (PCI_BDF(0,0,0), PCI_VENDOR_ID, &reg32);
-	printf("pex_mpc85xx_init: pex cr %2x %8x\n",PCI_VENDOR_ID, reg32);
-
-	pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg32);
-	reg32 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg32);
-#else
 	pci_read_config_word (PCI_BDF(0,0,0), PCI_VENDOR_ID, &reg16);
 	debug("pex_mpc86xx_init: read %2x %4x\n",PCI_VENDOR_ID, reg16);
 	pci_read_config_word (PCI_BDF(0,0,0), PCI_DEVICE_ID, &reg16);
 	debug("pex_mpc86xx_init: read %2x %4x\n",PCI_DEVICE_ID, reg16);
 
 	pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR |  PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	reg16 |= PCI_COMMAND_SERR |  PCI_COMMAND_PARITY \
+		| PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
 	pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
 
         pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
 	debug("pex_mpc86xx_init: read %2x %4x\n",PCI_COMMAND, reg16);
 
-        
-#endif
-
 	/*
 	 * Clear non-reserved bits in status register.
 	 */
-	//	pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
-	//	pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
+	/*
+	 * pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
+	 * pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
+	 */
 
 	pex1->powbar1  = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
 	pex1->powar1   = 0x8004401c;	/* 512M MEM space */
@@ -129,7 +120,6 @@ pci_mpc86xx_init(struct pci_controller *hose)
 	pex1->potar2   = 0x00000000;
 	pex1->potear2  = 0x00000000;
 
-
 	if (!pex1->piwar1) {
 		pex1->pitar1 = 0x00000000;
 		pex1->piwbar1 = (0x80000000 >> 12 ) & 0x000fffff;
@@ -140,57 +130,34 @@ pci_mpc86xx_init(struct pci_controller *hose)
 	pex1->pitar2 = 0x00000000;
         pex1->piwbar2 = (0xe2000000 >> 12 ) & 0x000fffff;
         pex1->piwar2 = 0xa0f5501e;	/* Enable, Prefetch, Local Mem,
-                                           
-
-        
-/* 	if (pex1_host) { */
-/* #ifdef MPC8548_REV1_PEX12_ERRATA */
-/* 		pci_write_config_dword (PCI_BDF(0,0,0), 0x18, 0x00ff0100); */
-/* #else */
-
-
-
-                *(u32 *)(0xf8008000)= 0x80000000;
-                debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
-
-                pci_write_config_byte(PCI_BDF(0,0,0), PCI_PRIMARY_BUS,0x20);
-                pci_write_config_byte(PCI_BDF(0,0,0), PCI_SECONDARY_BUS,0x00);
-		pci_write_config_byte(PCI_BDF(0,0,0), PCI_SUBORDINATE_BUS,0x1F);
-/* #endif */
-
-
-                *(u32 *)(0xf8008000)= 0x80200000;
-                debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
-                *(u32 *)(0xf8008000)= 0x80200000;
-                debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
-
-                *(u32 *)(0xf8008000)= 0x80200000;
-                debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004));
+						 * Snoop R/W, 2G */
 
+	*(u32 *)(0xf8008000)= 0x80000000;
+	debug("Received data for addr 0x%08lx is 0x%08lx\n",
+	      *(u32*)(0xf8008000), *(u32*)(0xf8008004));
 
-                
-		hose->last_busno = pci_hose_scan(hose);
-                hose->last_busno = 0x21;
-		debug("pex_mpc86xx_init: last_busno %x\n",hose->last_busno);
-                debug("pex_mpc86xx init: current_busno %x\n ",hose->current_busno);
+	pci_write_config_byte(PCI_BDF(0,0,0), PCI_PRIMARY_BUS,0x20);
+	pci_write_config_byte(PCI_BDF(0,0,0), PCI_SECONDARY_BUS,0x00);
+	pci_write_config_byte(PCI_BDF(0,0,0), PCI_SUBORDINATE_BUS,0x1F);
 
+	*(u32 *)(0xf8008000)= 0x80200000;
+	debug("Received data for addr 0x%08lx is 0x%08lx\n",
+	      *(u32*)(0xf8008000), *(u32*)(0xf8008004));
 
-                printf("....PCI scan & enumeration done\n");
+	*(u32 *)(0xf8008000)= 0x80200000;
+	debug("Received data for addr 0x%08lx is 0x%08lx\n",
+	      *(u32*)(0xf8008000), *(u32*)(0xf8008004));
 
-/*                 *(u32 *)(0xf8008000)= 0x80000000 | (0x12 << 11); */
-/*                 printf("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); */
-                
-/* 		if (hose->last_busno < 1) { */
-/* 			hose->last_busno=1;  /\*Hack*\/ */
-/*                 } else { */
-/*                    hose->last_busno = 0; */
-/*                 } */
-/*}*/
-/*         pci_read_config_dword (PCI_BDF(1,0,0), 0x18, &reg32); */
-/*         printf("pex_mpc86xx_init: pex cr %2x %8x\n",0x18, reg32); */
+	*(u32 *)(0xf8008000)= 0x80200000;
+	debug("Received data for addr 0x%08lx is 0x%08lx\n",
+	      *(u32*)(0xf8008000), *(u32*)(0xf8008004));
 
+	hose->last_busno = pci_hose_scan(hose);
+	hose->last_busno = 0x21;
+	debug("pex_mpc86xx_init: last_busno %x\n",hose->last_busno);
+	debug("pex_mpc86xx init: current_busno %x\n ",hose->current_busno);
 
+	printf("....PCI scan & enumeration done\n");
 }
+
 #endif /* CONFIG_PCI */
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 9c07f200fb..9ce31d7c6f 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -179,7 +179,7 @@ spd_sdram(void)
 
         unsigned int law_size;
         volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
-        
+
 	/*
 	 * Read SPD information.
 	 */
@@ -614,7 +614,7 @@ spd_sdram(void)
 
 	ddr1->timing_cfg_2 = (0
 		| ((add_lat & 0x7) << 28)		/* ADD_LAT */
-		| ((cpo & 0x1f) << 23)			/* CPO */ 
+		| ((cpo & 0x1f) << 23)			/* CPO */
 		| ((wr_lat & 0x7) << 19)		/* WR_LAT */
 		| ((trtp_clk & 0x7) << 13)		/* RD_TO_PRE */
 		| ((wr_data_delay & 0x7) << 10)		/* WR_DATA_DELAY */
@@ -806,7 +806,7 @@ spd_sdram(void)
 	/*
 	 * Memory will be initialized via DMA, or not at all.
 	 */
-	d_init = 0;	
+	d_init = 0;
 #endif
 
 	ddr1->sdram_cfg_2 = (0
@@ -946,8 +946,7 @@ spd_sdram(void)
 		       | (LAWAR_SIZE & law_size));
 	debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
 	debug("DDR: LARAR1=0x%08x\n", mcm->lawar1);
-        
-        
+
 	return memsize * 1024 * 1024;
 }
 
diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c
index 0f5a6388ce..a08ae5f94b 100644
--- a/cpu/mpc86xx/speed.c
+++ b/cpu/mpc86xx/speed.c
@@ -33,9 +33,7 @@ unsigned long get_board_sys_clk(ulong dummy);
 unsigned long get_sysclk_from_px_regs(void);
 
 
-/* --------------------------------------------------------------- */
-
-void get_sys_info (sys_info_t * sysInfo)
+void get_sys_info (sys_info_t *sysInfo)
 {
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -43,7 +41,7 @@ void get_sys_info (sys_info_t * sysInfo)
 
        	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
-	
+
 	switch(plat_ratio) {
         case 0x0:
 		sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
@@ -65,72 +63,77 @@ void get_sys_info (sys_info_t * sysInfo)
 		break;
 	}
 
-        //        printf("assigned system bus freq = %d for plat ratio 0x%08lx\n", sysInfo->freqSystemBus, plat_ratio);
+#if 0
+        printf("assigned system bus freq = %d for plat ratio 0x%08lx\n",
+	       sysInfo->freqSystemBus, plat_ratio);
+#endif
+
 	e600_ratio = (gur->porpllsr) & 0x003f0000;
 	e600_ratio >>= 16;
-	switch(e600_ratio) {     
+
+	switch (e600_ratio) {
 	case 0x10:
-		sysInfo->freqProcessor = 2*sysInfo->freqSystemBus;
+		sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
 		break;
-        case 0x19:                
-		sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2;
+        case 0x19:
+		sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus/2;
 		break;
 	case 0x20:
-		sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
+		sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
 		break;
         case 0x39:
-		sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2;
+		sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus/2;
 		break;
 	case 0x28:
-		sysInfo->freqProcessor = 4*sysInfo->freqSystemBus;
+		sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
 		break;
 	case 0x1d:
-		sysInfo->freqProcessor = 9*sysInfo->freqSystemBus/2;
+		sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus/2;
 		break;
        	default:
-	  /* JB - Emulator workaround until real cop is plugged in */
-	  sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
-	  //sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
+		/* JB - Emulator workaround until real cop is plugged in */
+		/* sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; */
+		sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
 		break;
 	}
-        //        printf("assigned processor freq = %d for e600 ratio 0x%08lx\n", sysInfo->freqProcessor, e600_ratio);
-
+#if 0
+        printf("assigned processor freq = %d for e600 ratio 0x%08lx\n",
+	       sysInfo->freqProcessor, e600_ratio);
+#endif
 }
 
 
-/* ------------------------------------------------------------------------- */
-
 /*
  * Measure CPU clock speed (core clock GCLK1, GCLK2)
- *
  * (Approx. GCLK frequency in Hz)
  */
 
-int get_clocks (void)
+int get_clocks(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 	sys_info_t sys_info;
 
-	get_sys_info (&sys_info);
+	get_sys_info(&sys_info);
 	gd->cpu_clk = sys_info.freqProcessor;
 	gd->bus_clk = sys_info.freqSystemBus;
-	
-	if(gd->cpu_clk != 0) return (0);
-	else return (1);
+
+	if (gd->cpu_clk != 0)
+		return 0;
+	else
+		return 1;
 }
 
-/* ------------------------------------------------------------------------- */
-/********************************************
+
+/*
  * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
+ *	Return system bus freq in Hz
+ */
+ulong get_bus_freq(ulong dummy)
 {
 	ulong val;
-
 	sys_info_t sys_info;
 
-	get_sys_info (&sys_info);
+	get_sys_info(&sys_info);
 	val = sys_info.freqSystemBus;
 
 	return val;
@@ -138,111 +141,100 @@ ulong get_bus_freq (ulong dummy)
 
 unsigned long get_sysclk_from_px_regs()
 {
-   ulong val;
-   u8 vclkh,vclkl;
-   
-   vclkh = in8(PIXIS_BASE+PIXIS_VCLKH);
-   vclkl = in8(PIXIS_BASE+PIXIS_VCLKL);
-   
-   if((vclkh == 0x84) && (vclkl ==0x07))
-   {
-      val = 33000000;
-   }
-   if((vclkh == 0x3F) && (vclkl ==0x20))
-   {
-      val = 40000000;
-   }
-   if((vclkh == 0x3F) && (vclkl ==0x2A))
-   {
-      val = 50000000;
-   }
-   if((vclkh == 0x24) && (vclkl ==0x04))
-   {
-      val = 66000000;
-   }
-   if((vclkh == 0x3F) && (vclkl ==0x4B))
-   {
-      val = 83000000;
-   }
-   if((vclkh == 0x3F) && (vclkl ==0x5C))
-   {
-      val = 100000000;
-   }
-   if((vclkh == 0xDF) && (vclkl ==0x3B))
-   {
-      val = 134000000;
-   }
-   if((vclkh == 0xDF) && (vclkl ==0x4B))
-   {
-      val = 166000000;
-   }
-   
-   return val;
+	ulong val;
+	u8 vclkh, vclkl;
+
+	vclkh = in8(PIXIS_BASE + PIXIS_VCLKH);
+	vclkl = in8(PIXIS_BASE + PIXIS_VCLKL);
+	
+	if ((vclkh == 0x84) && (vclkl == 0x07)) {
+		val = 33000000;
+	}
+	if ((vclkh == 0x3F) && (vclkl == 0x20)) {
+		val = 40000000;
+	}
+	if ((vclkh == 0x3F) && (vclkl == 0x2A)) {
+		val = 50000000;
+	}
+	if ((vclkh == 0x24) && (vclkl == 0x04)) {
+		val = 66000000;
+	}
+	if ((vclkh == 0x3F) && (vclkl == 0x4B)) {
+		val = 83000000;
+	}
+	if ((vclkh == 0x3F) && (vclkl == 0x5C)) {
+		val = 100000000;
+	}
+	if ((vclkh == 0xDF) && (vclkl == 0x3B)) {
+		val = 134000000;
+	}
+	if ((vclkh == 0xDF) && (vclkl == 0x4B)) {
+		val = 166000000;
+	}
+
+	return val;
 }
 
-/******* From MPC8641HPCN Design Workbook ************
- *
+
+/*
  * get_board_sys_clk
- * reads the FPGA on board for CONFIG_SYS_CLK_FREQ
- *
- ********************************************************/
+ *	Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
+ */
 
 unsigned long get_board_sys_clk(ulong dummy)
 {
-   u8 i, go_bit, rd_clks;
-   ulong val;
-
-   go_bit = in8(PIXIS_BASE+PIXIS_VCTL);
-   go_bit &= 0x01;
-
-   rd_clks = in8(PIXIS_BASE+PIXIS_VCFGEN0);
-   rd_clks &= 0x1C;
-
-   /* Only if both go bit and the SCLK bit in VCFGEN0 are set
-    * should we be using the AUX register. Remember, we also set the
-    * GO bit to boot from the alternate bank on the on-board flash
-    */
-   
-   if(go_bit)
-   {
-      if(rd_clks == 0x1c)
-         i = in8(PIXIS_BASE+PIXIS_AUX);
-      else
-         i = in8(PIXIS_BASE+PIXIS_SPD);
-      //val = get_sysclk_from_px_regs();
-   }
-   else
-      i = in8(PIXIS_BASE+PIXIS_SPD);
-   
-   i &= 0x07;
-      
-   switch(i)
-   {
-      case 0:
-         val = 33000000;
-         break;
-      case 1:
-         val = 40000000;
-         break;
-      case 2:
-         val = 50000000;
-         break;
-      case 3:
-         val = 66000000;
-         break;
-      case 4:
-         val = 83000000;
-         break;
-      case 5:
-         val = 100000000;
-         break;
-      case 6:
-         val = 134000000;
-         break;
-      case 7:
-         val = 166000000;
-         break;
-   }
-   
-   return val;
+	u8 i, go_bit, rd_clks;
+	ulong val;
+
+	go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
+	go_bit &= 0x01;
+
+	rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
+	rd_clks &= 0x1C;
+
+	/*
+	 * Only if both go bit and the SCLK bit in VCFGEN0 are set
+	 * should we be using the AUX register. Remember, we also set the
+	 * GO bit to boot from the alternate bank on the on-board flash
+	 */
+
+	if (go_bit) {
+		if (rd_clks == 0x1c)
+			i = in8(PIXIS_BASE + PIXIS_AUX);
+		else
+			i = in8(PIXIS_BASE + PIXIS_SPD);
+	} else {
+		i = in8(PIXIS_BASE + PIXIS_SPD);
+	}
+
+	i &= 0x07;
+
+	switch (i) {
+	case 0:
+		val = 33000000;
+		break;
+	case 1:
+		val = 40000000;
+		break;
+	case 2:
+		val = 50000000;
+		break;
+	case 3:
+		val = 66000000;
+		break;
+	case 4:
+		val = 83000000;
+		break;
+	case 5:
+		val = 100000000;
+		break;
+	case 6:
+		val = 134000000;
+		break;
+	case 7:
+		val = 166000000;
+		break;
+	}
+
+	return val;
 }
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 531bd0c5fb..0a447a76b7 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -783,12 +783,12 @@ ppcDcbz:
 	dcbz	r0,r3
 	blr
 
-/*------------------------------------------------------------------------------- */
+/*-------------------------------------------------------------------------- */
 /* Function:	 ppcSync */
 /* Description:	 Processor Synchronize */
 /* Input:	 none. */
 /* Output:	 none. */
-/*------------------------------------------------------------------------------- */
+/*-------------------------------------------------------------------------- */
 	.globl	ppcSync
 ppcSync:
 	sync
diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c
index fdfc95dfc5..8113dfbcc3 100644
--- a/cpu/mpc86xx/traps.c
+++ b/cpu/mpc86xx/traps.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/ppc/kernel/traps.c
- *
  * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
  *
  * Modified by Cort Dougan (cort@cs.nmt.edu)