mpc83xx: add QE ethernet support

this patch adds support for the QUICC Engine based UCC gigabit ethernet device.

3 files changed, 120 insertions, 7 deletions

diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 1aa0005d4d..e254ef98f6 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -29,7 +29,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  i2c.o spd_sdram.o
+	  i2c.o spd_sdram.o qe_io.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 999fe71964..eb8f8c042f 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -31,6 +31,30 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_QE
+extern qe_iop_conf_t qe_iop_conf_tab[];
+extern void qe_config_iopin(u8 port, u8 pin, int dir,
+			 int open_drain, int assign);
+extern void qe_init(uint qe_base);
+extern void qe_reset(void);
+
+static void config_qe_ioports(void)
+{
+	u8	port, pin;
+	int	dir, open_drain, assign;
+	int	i;
+
+	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
+		port		= qe_iop_conf_tab[i].port;
+		pin		= qe_iop_conf_tab[i].pin;
+		dir		= qe_iop_conf_tab[i].dir;
+		open_drain	= qe_iop_conf_tab[i].open_drain;
+		assign		= qe_iop_conf_tab[i].assign;
+		qe_config_iopin(port, pin, dir, open_drain, assign);
+	}
+}
+#endif
+
 /*
  * Breathe some life into the CPU...
  *
@@ -100,6 +124,10 @@ void cpu_init_f (volatile immap_t * im)
 #ifdef CFG_SICRL
 	im->sysconf.sicrl = CFG_SICRL;
 #endif
+#ifdef CONFIG_QE
+	/* Config QE ioports */
+	config_qe_ioports();
+#endif
 
 	/*
 	 * Memory Controller:
@@ -188,12 +216,12 @@ void cpu_init_f (volatile immap_t * im)
 #endif
 }
 
-
-/*
- * Initialize higher level parts of CPU like time base and timers.
- */
-
 int cpu_init_r (void)
 {
+#ifdef CONFIG_QE
+	uint qe_base = CFG_IMMRBAR + 0x00100000; /* QE immr base */
+	qe_init(qe_base);
+	qe_reset();
+#endif
 	return 0;
 }
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
new file mode 100644
index 0000000000..11cf3722bd
--- /dev/null
+++ b/cpu/mpc83xx/qe_io.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_83xx.h"
+
+#if defined(CONFIG_QE)
+#define	NUM_OF_PINS	32
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+{
+	u32			pin_2bit_mask;
+	u32			pin_2bit_dir;
+	u32			pin_2bit_assign;
+	u32			pin_1bit_mask;
+	u32			tmp_val;
+	volatile immap_t	*im = (volatile immap_t *)CFG_IMMRBAR;
+	volatile gpio83xx_t	*par_io =(volatile gpio83xx_t *)&im->gpio;
+
+	/* Caculate pin location and 2bit mask and dir */
+	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+	pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+
+	/* Setup the direction */
+	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+		in_be32(&par_io->ioport[port].dir2) :
+		in_be32(&par_io->ioport[port].dir1);
+
+	if (pin > (NUM_OF_PINS/2) -1) {
+		out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
+	} else {
+		out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
+	}
+
+	/* Calculate pin location for 1bit mask */
+	pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+
+	/* Setup the open drain */
+	tmp_val = in_be32(&par_io->ioport[port].podr);
+	if (open_drain) {
+		out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
+	} else {
+		out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
+	}
+
+	/* Setup the assignment */
+	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
+		in_be32(&par_io->ioport[port].ppar2):
+		in_be32(&par_io->ioport[port].ppar1);
+	pin_2bit_assign = (u32)(assign
+				<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+
+	/* Clear and set 2 bits mask */
+	if (pin > (NUM_OF_PINS/2) - 1) {
+		out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
+	} else {
+		out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
+	}
+}
+
+#endif /* CONFIG_QE */