Add DMA support for MPC83xx.

1 files changed, 85 insertions, 0 deletions

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 63f82422f5..f24d3a4b1c 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -191,3 +191,88 @@ ft_cpu_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
+
+#if defined(CONFIG_DDR_ECC)
+void dma_init(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile dma8349_t *dma = &immap->dma;
+	volatile u32 status = swab32(dma->dmasr0);
+	volatile u32 dmamr0 = swab32(dma->dmamr0);
+
+	debug("DMA-init\n");
+
+	/* initialize DMASARn, DMADAR and DMAABCRn */
+	dma->dmadar0 = (u32)0;
+	dma->dmasar0 = (u32)0;
+	dma->dmabcr0 = 0;
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* clear CS bit */
+	dmamr0 &= ~DMA_CHANNEL_START;
+	dma->dmamr0 = swab32(dmamr0);
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* while the channel is busy, spin */
+	while(status & DMA_CHANNEL_BUSY) {
+		status = swab32(dma->dmasr0);
+	}
+
+	debug("DMA-init end\n");
+}
+
+uint dma_check(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile dma8349_t *dma = &immap->dma;
+	volatile u32 status = swab32(dma->dmasr0);
+	volatile u32 byte_count = swab32(dma->dmabcr0);
+
+	/* while the channel is busy, spin */
+	while (status & DMA_CHANNEL_BUSY) {
+		status = swab32(dma->dmasr0);
+	}
+
+	if (status & DMA_CHANNEL_TRANSFER_ERROR) {
+		printf ("DMA Error: status = %x @ %d\n", status, byte_count);
+	}
+
+	return status;
+}
+
+int dma_xfer(void *dest, u32 count, void *src)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile dma8349_t *dma = &immap->dma;
+	volatile u32 dmamr0;
+
+	/* initialize DMASARn, DMADAR and DMAABCRn */
+	dma->dmadar0 = swab32((u32)dest);
+	dma->dmasar0 = swab32((u32)src);
+	dma->dmabcr0 = swab32(count);
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* init direct transfer, clear CS bit */
+	dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT |
+			DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B |
+			DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN);
+	
+	dma->dmamr0 = swab32(dmamr0);
+
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	/* set CS to start DMA transfer */
+	dmamr0 |= DMA_CHANNEL_START;
+	dma->dmamr0 = swab32(dmamr0);
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("isync");
+
+	return ((int)dma_check());
+}
+#endif /*CONFIG_DDR_ECC*/