diff options
| author | Marco Schuster <m.schuster91@googlemail.com> | 2015-11-29 19:30:42 +0100 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-01-13 21:05:26 -0500 |
| commit | 247be79a99041e0b5f56cea4100f5cc98e827b64 (patch) | |
| tree | 5eeacff2e2261b24b2146e50a323333bec4a7eec /configs | |
| parent | 4e42e29fd6aec3aa6b85c41fb944e2908a457074 (diff) | |
| download | blackbird-obmc-uboot-247be79a99041e0b5f56cea4100f5cc98e827b64.tar.gz blackbird-obmc-uboot-247be79a99041e0b5f56cea4100f5cc98e827b64.zip | |
Re-enable setexpr on Raspberry Pi
This patch re-enables the setexpr command, I don't really understand
why it got excluded in the first place.
setexpr can be used e.g. to implement failed-boot-counters and
failovers to rescue firmware.
Signed-off-by: Marco Schuster <m.schuster91@googlemail.com>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/rpi_2_defconfig | 1 | ||||
| -rw-r--r-- | configs/rpi_defconfig | 1 |
2 files changed, 0 insertions, 2 deletions
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 5c9e69af3b..bd81ee6a1d 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -6,5 +6,4 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index b8b267f371..5d27909ebe 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -6,5 +6,4 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y |
