* Patch by Steven Scholz, 10 Oct 2003

  - Add support for Altera FPGA ACEX1K

* Patches by Thomas Lange, 09 Oct 2003:
  - Endian swap ATA identity for all big endian CPUs, not just PPC
  - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
    args to linux
  - add support for dbau1x00 board (MIPS32)

1 files changed, 176 insertions, 17 deletions

diff --git a/common/altera.c b/common/altera.c
index beb0147b4b..31b3728ef5 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2003
+ * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de
+ *
  * (C) Copyright 2002
  * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
  *
@@ -23,20 +26,13 @@
  */
 
 /*
- * Note that this is just boilerplate - there is no Altera support yet.
- */
-
-
-/*
  *  Altera FPGA support
  */
 #include <common.h>
-#include <fpga.h>                     /* Generic FPGA support  */
-#include <altera.h>                   /* Altera specific stuff */
+#include <ACEX1K.h>
 
-#if 0
-#define FPGA_DEBUG
-#endif
+/* Define FPGA_DEBUG to get debug printf's */
+/* #define FPGA_DEBUG */
 
 #ifdef	FPGA_DEBUG
 #define	PRINTF(fmt,args...)	printf (fmt ,##args)
@@ -46,28 +42,191 @@
 
 #if (CONFIG_FPGA & CFG_FPGA_ALTERA)
 
+/* Local Static Functions */
+static int altera_validate (Altera_desc * desc, char *fn);
+
 /* ------------------------------------------------------------------------- */
 int altera_load( Altera_desc *desc, void *buf, size_t bsize )
 {
-	printf( "No support for Altera devices yet.\n" );
-	return FPGA_FAIL;
+	int ret_val = FPGA_FAIL;	/* assume a failure */
+
+	if (!altera_validate (desc, __FUNCTION__)) {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	} else {
+		switch (desc->family) {
+		case Altera_ACEX1K:
+#if (CONFIG_FPGA & CFG_ACEX1K)
+			PRINTF ("%s: Launching the ACEX1K Loader...\n",
+					__FUNCTION__);
+			ret_val = ACEX1K_load (desc, buf, bsize);
+#else
+			printf ("%s: No support for ACEX1K devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+
+		default:
+			printf ("%s: Unsupported family type, %d\n",
+					__FUNCTION__, desc->family);
+		}
+	}
+
+	return ret_val;
 }
 
 int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
 {
-	printf( "No support for Altera devices yet.\n" );
-	return FPGA_FAIL;
+	int ret_val = FPGA_FAIL;	/* assume a failure */
+
+	if (!altera_validate (desc, __FUNCTION__)) {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	} else {
+		switch (desc->family) {
+		case Altera_ACEX1K:
+#if (CONFIG_FPGA & CFG_ACEX)
+			PRINTF ("%s: Launching the ACEX1K Reader...\n",
+					__FUNCTION__);
+			ret_val = ACEX1K_dump (desc, buf, bsize);
+#else
+			printf ("%s: No support for ACEX1K devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+
+		default:
+			printf ("%s: Unsupported family type, %d\n",
+					__FUNCTION__, desc->family);
+		}
+	}
+
+	return ret_val;
 }
 
 int altera_info( Altera_desc *desc )
 {
-	printf( "No support for Altera devices yet.\n" );
-	return FPGA_FAIL;
+	int ret_val = FPGA_FAIL;
+
+	if (altera_validate (desc, __FUNCTION__)) {
+		printf ("Family:        \t");
+		switch (desc->family) {
+		case Altera_ACEX1K:
+			printf ("ACEX1K\n");
+			break;
+			/* Add new family types here */
+		default:
+			printf ("Unknown family type, %d\n", desc->family);
+		}
+
+		printf ("Interface type:\t");
+		switch (desc->iface) {
+		case passive_serial:
+			printf ("Passive Serial (PS)\n");
+			break;
+		case passive_parallel_synchronous:
+			printf ("Passive Parallel Synchronous (PPS)\n");
+			break;
+		case passive_parallel_asynchronous:
+			printf ("Passive Parallel Asynchronous (PPA)\n");
+			break;
+		case passive_serial_asynchronous:
+			printf ("Passive Serial Asynchronous (PSA)\n");
+			break;
+		case altera_jtag_mode:		/* Not used */
+			printf ("JTAG Mode\n");
+			break;
+			/* Add new interface types here */
+		default:
+			printf ("Unsupported interface type, %d\n", desc->iface);
+		}
+
+		printf ("Device Size:   \t%d bytes\n"
+				"Cookie:        \t0x%x (%d)\n",
+				desc->size, desc->cookie, desc->cookie);
+
+		if (desc->iface_fns) {
+			printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
+			switch (desc->family) {
+			case Altera_ACEX1K:
+#if (CONFIG_FPGA & CFG_ACEX1K)
+				ACEX1K_info (desc);
+#else
+				/* just in case */
+				printf ("%s: No support for ACEX1K devices.\n",
+						__FUNCTION__);
+#endif
+				break;
+				/* Add new family types here */
+			default:
+				/* we don't need a message here - we give one up above */
+			}
+		} else {
+			printf ("No Device Function Table.\n");
+		}
+
+		ret_val = FPGA_SUCCESS;
+	} else {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	}
+
+	return ret_val;
+}
+
+int altera_reloc( Altera_desc *desc, ulong reloc_offset)
+{
+	int ret_val = FPGA_FAIL;	/* assume a failure */
+
+	if (!altera_validate (desc, __FUNCTION__)) {
+		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
+	} else {
+		switch (desc->family) {
+		case Altera_ACEX1K:
+#if (CONFIG_FPGA & CFG_ACEX1K)
+			ret_val = ACEX1K_reloc (desc, reloc_offset);
+#else
+			printf ("%s: No support for ACEX devices.\n",
+					__FUNCTION__);
+#endif
+			break;
+			/* Add new family types here */
+		default:
+			printf ("%s: Unsupported family type, %d\n",
+					__FUNCTION__, desc->family);
+		}
+	}
+
+	return ret_val;
 }
 
 /* ------------------------------------------------------------------------- */
 
+static int altera_validate (Altera_desc * desc, char *fn)
+{
+	int ret_val = FALSE;
+
+	if (desc) {
+		if ((desc->family > min_altera_type) &&
+			(desc->family < max_altera_type)) {
+			if ((desc->iface > min_altera_iface_type) &&
+				(desc->iface < max_altera_iface_type)) {
+				if (desc->size) {
+					ret_val = TRUE;
+				} else {
+					printf ("%s: NULL part size\n", fn);
+				}
+			} else {
+				printf ("%s: Invalid Interface type, %d\n",
+					fn, desc->iface);
+			}
+		} else {
+			printf ("%s: Invalid family type, %d\n", fn, desc->family);
+		}
+	} else {
+		printf ("%s: NULL descriptor!\n", fn);
+	}
+
+	return ret_val;
+}
 
 /* ------------------------------------------------------------------------- */
 
-#endif  /* CONFIG_FPGA & CFG_FPGA_ALTERA */
+#endif /* CONFIG_FPGA & CFG_FPGA_ALTERA */