ppc4xx: Remove ML2 board support

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Peter De Schrijver <p2@mind.be>
Acked-by: Marek Vasut <marex@denx.de>

7 files changed, 0 insertions, 804 deletions

diff --git a/board/ml2/Makefile b/board/ml2/Makefile
deleted file mode 100644
index f4df3aca99..0000000000
--- a/board/ml2/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o serial.o
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ml2/flash.c b/board/ml2/flash.c
deleted file mode 100644
index c125d418d3..0000000000
--- a/board/ml2/flash.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * flash.c: Support code for the flash chips on the Xilinx ML2 board
- *
- * Copyright 2002 Mind NV
- *
- * http://www.mind.be/
- *
- * Author : Peter De Schrijver (p2@mind.be)
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL) version 2, incorporated herein by
- * reference. Drivers based on or derived from this code fall under the GPL
- * and must retain the authorship, copyright and this license notice. This
- * file is not a complete program and may only be used when the entire program
- * is licensed under the GPL.
- *
- */
-
-#include <common.h>
-#include <asm/u-boot.h>
-#include <configs/ML2.h>
-
-#define FLASH_BANK_SIZE (64*1024*1024)
-
-flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define SECT_SIZE		(512*1024)
-
-#define CMD_READ_ARRAY	0x00FF00FF00FF00FULL
-#define CMD_IDENTIFY        0x0090009000900090ULL
-#define CMD_ERASE_SETUP     0x0020002000200020ULL
-#define CMD_ERASE_CONFIRM   0x00D000D000D000D0ULL
-#define CMD_PROGRAM     0x0040004000400040ULL
-#define CMD_RESUME      0x00D000D000D000D0ULL
-#define CMD_SUSPEND     0x00B000B000B000B0ULL
-#define CMD_STATUS_READ     0x0070007000700070ULL
-#define CMD_STATUS_RESET    0x0050005000500050ULL
-
-#define BIT_BUSY        0x0080008000800080ULL
-#define BIT_ERASE_SUSPEND   0x004000400400040ULL
-#define BIT_ERASE_ERROR     0x0020002000200020ULL
-#define BIT_PROGRAM_ERROR   0x0010001000100010ULL
-#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL
-#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL
-#define BIT_PROTECT_ERROR   0x0002000200020002ULL
-#define BIT_UNDEFINED       0x0001000100010001ULL
-
-#define BIT_SEQUENCE_ERROR  0x0030003000300030ULL
-
-#define BIT_TIMEOUT     0x80000000
-
-
-inline void eieio(void) {
-
-	__asm__ __volatile__ ("eieio" : : : "memory");
-
-}
-
-ulong flash_init(void) {
-
-	int i, j;
-	ulong size = 0;
-
-	for(i=0;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) |
-								 (INTEL_ID_28F128J3A & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		if (i==0)
-			flashbase = CONFIG_SYS_FLASH_BASE;
-		else
-			panic("configured too many flash banks!\n");
-		for (j = 0; j < flash_info[i].sector_count; j++)
-				flash_info[i].start[j]=flashbase + j * SECT_SIZE;
-
-		size += flash_info[i].size;
-	}
-
-	return size;
-}
-
-void flash_print_info  (flash_info_t *info) {
-
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-		case (INTEL_MANUFACT & FLASH_VENDMASK):
-			printf("Intel: ");
-			break;
-		default:
-			printf("Unknown Vendor ");
-			break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-		case (INTEL_ID_28F128J3A & FLASH_TYPEMASK):
-			printf("4x 28F128J3A (128Mbit)\n");
-			break;
-		default:
-			printf("Unknown Chip Type\n");
-			break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf (" %08lX%s", info->start[i],
-				 info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-}
-
-int flash_error (unsigned long long code) {
-
-	if (code & BIT_TIMEOUT) {
-		printf ("Timeout\n");
-		return ERR_TIMOUT;
-	}
-
-	if (~code & BIT_BUSY) {
-		printf ("Busy\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_VPP_RANGE_ERROR) {
-		printf ("Vpp range error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_PROTECT_ERROR) {
-		printf ("Device protect error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_SEQUENCE_ERROR) {
-		printf ("Command seqence error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_ERASE_ERROR) {
-		printf ("Block erase error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_PROGRAM_ERROR) {
-		printf ("Program error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_ERASE_SUSPEND) {
-		printf ("Block erase suspended\n");
-		return ERR_PROG_ERROR;
-	}
-
-	if (code & BIT_PROGRAM_SUSPEND) {
-		printf ("Program suspended\n");
-		return ERR_PROG_ERROR;
-	}
-
-	return ERR_OK;
-
-}
-
-int flash_erase (flash_info_t *info, int s_first, int s_last) {
-
-	int rc = ERR_OK;
-	int sect;
-	unsigned long long result;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last))
-		return ERR_INVAL;
-
-	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
-		return ERR_UNKNOWN_FLASH_VENDOR;
-
-	for (sect=s_first; sect<=s_last; ++sect)
-		if (info->protect[sect])
-			return ERR_PROTECTED;
-
-	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-		volatile unsigned long long *addr=
-									(unsigned long long *)(info->start[sect]);
-
-		printf("Erasing sector %2d ... ", sect);
-
-		*addr=CMD_STATUS_RESET;
-		eieio();
-		*addr=CMD_ERASE_SETUP;
-		eieio();
-		*addr=CMD_ERASE_CONFIRM;
-		eieio();
-
-		do {
-			result = *addr;
-		} while(~result & BIT_BUSY);
-
-		*addr=CMD_READ_ARRAY;
-
-		if ((rc = flash_error(result)) == ERR_OK)
-			printf("ok.\n");
-		else
-			break;
-	}
-
-	if (ctrlc())
-		printf("User Interrupt!\n");
-
-	return rc;
-}
-
-static int write_word (flash_info_t *info, ulong dest, unsigned long long data) {
-
-	volatile unsigned long long *addr=(unsigned long long *)dest;
-	unsigned long long result;
-	int rc = ERR_OK;
-
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-	*addr=CMD_STATUS_RESET;
-	eieio();
-	*addr=CMD_PROGRAM;
-	eieio();
-	*addr=data;
-	eieio();
-
-	do {
-		result = *addr;
-	} while(~result & BIT_BUSY);
-
-	*addr=CMD_READ_ARRAY;
-
-	rc = flash_error(result);
-
-	return rc;
-
-}
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
-
-	ulong cp, wp;
-	unsigned long long data;
-	int l;
-	int i,rc;
-
-	wp=(addr & ~7);
-
-	if((l=addr-wp) != 0) {
-		data=0;
-		for(i=0,cp=wp;i<l;++i,++cp)
-			data = (data >> 8) | (*(uchar *)cp << 24);
-
-		for (; i<8 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 24);
-			--cnt;
-			++cp;
-		}
-
-		for (; i<8; ++i, ++cp)
-			data = (data >> 8) | (*(uchar *)cp << 24);
-
-		if ((rc = write_word(info, wp, data)) != 0)
-			return rc;
-
-		wp+=8;
-	}
-
-	while(cnt>=8) {
-		data = *((unsigned long long *)src);
-		if ((rc = write_word(info, wp, data)) != 0)
-			return rc;
-		src+=8;
-		wp+=8;
-		cnt-=8;
-	}
-
-	if(cnt == 0)
-		return ERR_OK;
-
-	data = 0;
-	for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 24);
-		--cnt;
-	}
-	for (; i<8; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 24);
-	}
-
-	return write_word(info, wp, data);
-
-}
diff --git a/board/ml2/init.S b/board/ml2/init.S
deleted file mode 100644
index 91d053c96e..0000000000
--- a/board/ml2/init.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * init.S: Stubs for U-Boot initialization
- *
- * Copyright 2002 Mind NV
- *
- * http://www.mind.be/
- *
- * Author : Peter De Schrijver (p2@mind.be)
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL) version 2, incorporated herein by
- * reference. Drivers based on or derived from this code fall under the GPL
- * and must retain the authorship, copyright and this license notice. This
- * file is not a complete program and may only be used when the entire
- * program is licensed under the GPL.
- *
- */
-
-#include <asm/ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-	.globl	ext_bus_cntlr_init
-ext_bus_cntlr_init:
-	blr
diff --git a/board/ml2/ml2.c b/board/ml2/ml2.c
deleted file mode 100644
index 319dca09db..0000000000
--- a/board/ml2/ml2.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * ml2.c: U-Boot platform support for Xilinx ML2 board
- *
- * Copyright 2002 Mind NV
- *
- * http://www.mind.be/
- *
- * Author : Peter De Schrijver (p2@mind.be)
- *
- * Derived from : Other platform support files in this tree
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL) version 2, incorporated herein by
- * reference. Drivers based on or derived from this code fall under the GPL
- * and must retain the authorship, copyright and this license notice. This
- * file is not a complete program and may only be used when the entire
- * program is licensed under the GPL.
- *
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-
-int checkboard (void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	if (l < 0 || strncmp(buf, "ML2", 9)) {
-		printf ("### No HW ID - assuming ML2");
-	} else {
-		for (i = 0; i < l; i++) {
-			if (buf[i] == ' ')
-				break;
-			putc(buf[i]);
-		}
-	}
-	putc ('\n');
-
-	return (0);
-}
-
-
-phys_size_t initdram (int board_type)
-{
-	return 32 * 1024 * 1024;
-}
-
-int testdram (void)
-{
-	printf ("test: xxx MB - ok\n");
-
-	return (0);
-}
diff --git a/board/ml2/serial.c b/board/ml2/serial.c
deleted file mode 100644
index 787ff464d2..0000000000
--- a/board/ml2/serial.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2002
- * Peter De Schrijver (p2@mind.be), Mind Linux Solutions, NV.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <configs/ML2.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
-#include <ns16550.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
-const NS16550_t COM_PORTS[] = { (NS16550_t) CONFIG_SYS_NS16550_COM1,
-	(NS16550_t) CONFIG_SYS_NS16550_COM2
-};
-#endif
-
-static int ml2_serial_init(void)
-{
-	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
-
-#ifdef CONFIG_SYS_INIT_CHAN1
-	(void) NS16550_init (COM_PORTS[0], clock_divisor);
-#endif
-#ifdef CONFIG_SYS_INIT_CHAN2
-	(void) NS16550_init (COM_PORTS[1], clock_divisor);
-#endif
-	return 0;
-
-}
-
-static void ml2_serial_putc(const char c)
-{
-	if (c == '\n')
-		NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
-
-	NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
-}
-
-static int ml2_serial_getc(void)
-{
-	return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-static int ml2_serial_tstc(void)
-{
-	return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-static void ml2_serial_setbrg(void)
-{
-	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
-
-#ifdef CONFIG_SYS_INIT_CHAN1
-	NS16550_reinit (COM_PORTS[0], clock_divisor);
-#endif
-#ifdef CONFIG_SYS_INIT_CHAN2
-	NS16550_reinit (COM_PORTS[1], clock_divisor);
-#endif
-}
-
-static void ml2_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-static struct serial_device ml2_serial_drv = {
-	.name	= "ml2_serial",
-	.start	= ml2_serial_init,
-	.stop	= NULL,
-	.setbrg	= ml2_serial_setbrg,
-	.putc	= ml2_serial_putc,
-	.puts	= ml2_serial_puts,
-	.getc	= ml2_serial_getc,
-	.tstc	= ml2_serial_tstc,
-};
-
-void ml2_serial_initialize(void)
-{
-	serial_register(&ml2_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &ml2_serial_drv;
-}
-
-#if defined(CONFIG_CMD_KGDB)
-void kgdb_serial_init (void)
-{
-}
-
-void putDebugChar (int c)
-{
-	serial_putc (c);
-}
-
-void putDebugStr (const char *str)
-{
-	serial_puts (str);
-}
-
-int getDebugChar (void)
-{
-	return serial_getc ();
-}
-
-void kgdb_interruptible (int yes)
-{
-	return;
-}
-#endif
diff --git a/board/ml2/u-boot.lds b/board/ml2/u-boot.lds
deleted file mode 100644
index 9f9ddb8bf0..0000000000
--- a/board/ml2/u-boot.lds
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/ml2/u-boot.lds.debug b/board/ml2/u-boot.lds.debug
deleted file mode 100644
index fcf8ebbf8e..0000000000
--- a/board/ml2/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    arch/powerpc/lib/extable.o	(.text)
-
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}