arm: marvell: Extract kirkwood gpio functions into new common file gpio.c

This makes is possible to use those gpio functions from other MVEBU SoC's as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>

18 files changed, 51 insertions, 51 deletions

diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c
index 471db77a97..12a516e30a 100644
--- a/board/LaCie/net2big_v2/net2big_v2.c
+++ b/board/LaCie/net2big_v2/net2big_v2.c
@@ -26,8 +26,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
 	/* GPIO configuration */
-	kw_config_gpio(NET2BIG_V2_OE_VAL_LOW, NET2BIG_V2_OE_VAL_HIGH,
-			NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH);
+	mvebu_config_gpio(NET2BIG_V2_OE_VAL_LOW, NET2BIG_V2_OE_VAL_HIGH,
+			  NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c
index 6a16e7bf72..323e34a6c2 100644
--- a/board/LaCie/netspace_v2/netspace_v2.c
+++ b/board/LaCie/netspace_v2/netspace_v2.c
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
 	/* Gpio configuration */
-	kw_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
-			NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
+	mvebu_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
+			  NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c
index 53f5d2f95b..15b34a388c 100644
--- a/board/LaCie/wireless_space/wireless_space.c
+++ b/board/LaCie/wireless_space/wireless_space.c
@@ -97,8 +97,8 @@ struct mv88e61xx_config swcfg = {
 int board_early_init_f(void)
 {
 	/* Gpio configuration */
-	kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
-			WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
+	mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
+			  WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	kirkwood_mpp_conf(kwmpp_config, NULL);
diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c
index 3c286be1da..07b7496f3a 100644
--- a/board/Marvell/dreamplug/dreamplug.c
+++ b/board/Marvell/dreamplug/dreamplug.c
@@ -25,9 +25,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(DREAMPLUG_OE_VAL_LOW,
-			DREAMPLUG_OE_VAL_HIGH,
-			DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH);
+	mvebu_config_gpio(DREAMPLUG_OE_VAL_LOW,
+			  DREAMPLUG_OE_VAL_HIGH,
+			  DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
index a5b42b43f4..b18a30657b 100644
--- a/board/Marvell/guruplug/guruplug.c
+++ b/board/Marvell/guruplug/guruplug.c
@@ -22,9 +22,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(GURUPLUG_OE_VAL_LOW,
-			GURUPLUG_OE_VAL_HIGH,
-			GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
+	mvebu_config_gpio(GURUPLUG_OE_VAL_LOW,
+			  GURUPLUG_OE_VAL_HIGH,
+			  GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
index ee665c19fd..97fb61bc90 100644
--- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
+++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
@@ -24,9 +24,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
-			MV88F6281GTW_GE_OE_VAL_HIGH,
-			MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
+	mvebu_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
+			  MV88F6281GTW_GE_OE_VAL_HIGH,
+			  MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c
index 78ebb6442d..52dd08383d 100644
--- a/board/Marvell/openrd/openrd.c
+++ b/board/Marvell/openrd/openrd.c
@@ -27,9 +27,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(OPENRD_OE_VAL_LOW,
-			OPENRD_OE_VAL_HIGH,
-			OPENRD_OE_LOW, OPENRD_OE_HIGH);
+	mvebu_config_gpio(OPENRD_OE_VAL_LOW,
+			  OPENRD_OE_VAL_HIGH,
+			  OPENRD_OE_LOW, OPENRD_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c
index 8248274b8f..df5fbea8ae 100644
--- a/board/Marvell/rd6281a/rd6281a.c
+++ b/board/Marvell/rd6281a/rd6281a.c
@@ -23,9 +23,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(RD6281A_OE_VAL_LOW,
-			RD6281A_OE_VAL_HIGH,
-			RD6281A_OE_LOW, RD6281A_OE_HIGH);
+	mvebu_config_gpio(RD6281A_OE_VAL_LOW,
+			  RD6281A_OE_VAL_HIGH,
+			  RD6281A_OE_LOW, RD6281A_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 4f17e09123..18eeb4c001 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -22,9 +22,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
-			SHEEVAPLUG_OE_VAL_HIGH,
-			SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
+	mvebu_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
+			  SHEEVAPLUG_OE_VAL_HIGH,
+			  SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c
index dc73dfaa3a..838f578104 100644
--- a/board/Seagate/dockstar/dockstar.c
+++ b/board/Seagate/dockstar/dockstar.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
-			DOCKSTAR_OE_VAL_HIGH,
-			DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
+	mvebu_config_gpio(DOCKSTAR_OE_VAL_LOW,
+			  DOCKSTAR_OE_VAL_HIGH,
+			  DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
@@ -143,7 +143,7 @@ void reset_phy(void)
 
 static void set_leds(u32 leds, u32 blinking)
 {
-	struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+	struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
 	u32 oe = readl(&r->oe) | BOTH_LEDS;
 	writel(oe & ~leds, &r->oe);	/* active low */
 	u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
index 3e4ae89368..c3f4cbf84d 100644
--- a/board/Seagate/goflexhome/goflexhome.c
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -83,9 +83,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(GOFLEXHOME_OE_VAL_LOW,
-		       GOFLEXHOME_OE_VAL_HIGH,
-		       GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
+	mvebu_config_gpio(GOFLEXHOME_OE_VAL_LOW,
+			  GOFLEXHOME_OE_VAL_HIGH,
+			  GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
 	kirkwood_mpp_conf(kwmpp_config, NULL);
 	return 0;
 }
@@ -149,7 +149,7 @@ static void set_leds(u32 leds, u32 blinking)
 	u32 oe;
 	u32 bl;
 
-	r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+	r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
 	oe = readl(&r->oe) | BOTH_LEDS;
 	writel(oe & ~leds, &r->oe);	/* active low */
 	bl = readl(&r->blink_en) & ~BOTH_LEDS;
diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c
index 6e648badd6..bca7be5482 100644
--- a/board/buffalo/lsxl/lsxl.c
+++ b/board/buffalo/lsxl/lsxl.c
@@ -52,9 +52,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(LSXL_OE_VAL_LOW,
-			LSXL_OE_VAL_HIGH,
-			LSXL_OE_LOW, LSXL_OE_HIGH);
+	mvebu_config_gpio(LSXL_OE_VAL_LOW,
+			  LSXL_OE_VAL_HIGH,
+			  LSXL_OE_LOW, LSXL_OE_HIGH);
 
 	/*
 	 * Multi-Purpose Pins Functionality configuration
diff --git a/board/cloudengines/pogo_e02/pogo_e02.c b/board/cloudengines/pogo_e02/pogo_e02.c
index ddc3fa62cb..314834f2ba 100644
--- a/board/cloudengines/pogo_e02/pogo_e02.c
+++ b/board/cloudengines/pogo_e02/pogo_e02.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(POGO_E02_OE_VAL_LOW,
-			POGO_E02_OE_VAL_HIGH,
-			POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
+	mvebu_config_gpio(POGO_E02_OE_VAL_LOW,
+			  POGO_E02_OE_VAL_HIGH,
+			  POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/d-link/dns325/dns325.c b/board/d-link/dns325/dns325.c
index f2f43f5197..fd23696fc3 100644
--- a/board/d-link/dns325/dns325.c
+++ b/board/d-link/dns325/dns325.c
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
 	/* Gpio configuration */
-	kw_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
-			DNS325_OE_LOW, DNS325_OE_HIGH);
+	mvebu_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
+			  DNS325_OE_LOW, DNS325_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
index f376d3dd72..76c945a969 100644
--- a/board/iomega/iconnect/iconnect.c
+++ b/board/iomega/iconnect/iconnect.c
@@ -22,9 +22,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(ICONNECT_OE_VAL_LOW,
-			ICONNECT_OE_VAL_HIGH,
-			ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
+	mvebu_config_gpio(ICONNECT_OE_VAL_LOW,
+			  ICONNECT_OE_VAL_HIGH,
+			  ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c
index e877aa35d8..7aec5f9060 100644
--- a/board/karo/tk71/tk71.c
+++ b/board/karo/tk71/tk71.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(TK71_OE_VAL_LOW,
-			TK71_OE_VAL_HIGH,
-			TK71_OE_LOW, TK71_OE_HIGH);
+	mvebu_config_gpio(TK71_OE_VAL_LOW,
+			  TK71_OE_VAL_HIGH,
+			  TK71_OE_LOW, TK71_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index cd508d22bc..6621464009 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -222,8 +222,8 @@ int board_early_init_f(void)
 	u32 tmp;
 
 	/* set the 2 bitbang i2c pins as output gpios */
-	tmp = readl(KW_GPIO0_BASE + 4);
-	writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4);
+	tmp = readl(MVEBU_GPIO0_BASE + 4);
+	writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , MVEBU_GPIO0_BASE + 4);
 #endif
 	/* adjust SDRAM size for bank 0 */
 	kw_sdram_size_adjust(0);
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
index 47956b2430..dbcfb43813 100644
--- a/board/raidsonic/ib62x0/ib62x0.c
+++ b/board/raidsonic/ib62x0/ib62x0.c
@@ -24,9 +24,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(IB62x0_OE_VAL_LOW,
-			IB62x0_OE_VAL_HIGH,
-			IB62x0_OE_LOW, IB62x0_OE_HIGH);
+	mvebu_config_gpio(IB62x0_OE_VAL_LOW,
+			  IB62x0_OE_VAL_HIGH,
+			  IB62x0_OE_LOW, IB62x0_OE_HIGH);
 
 	/* Set SATA activity LEDs to default off */
 	writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);