arm: Remove lp8x4x board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

4 files changed, 0 insertions, 155 deletions

diff --git a/board/icpdas/lp8x4x/Kconfig b/board/icpdas/lp8x4x/Kconfig
deleted file mode 100644
index 3e87c4016b..0000000000
--- a/board/icpdas/lp8x4x/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_LP8X4X
-
-config SYS_BOARD
-	default "lp8x4x"
-
-config SYS_VENDOR
-	default "icpdas"
-
-config SYS_CONFIG_NAME
-	default "lp8x4x"
-
-endif
diff --git a/board/icpdas/lp8x4x/MAINTAINERS b/board/icpdas/lp8x4x/MAINTAINERS
deleted file mode 100644
index 90a82e3fe4..0000000000
--- a/board/icpdas/lp8x4x/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-LP8X4X BOARD
-M:	Sergey Yanovich <ynvich@gmail.com>
-S:	Maintained
-F:	board/icpdas/lp8x4x/
-F:	include/configs/lp8x4x.h
-F:	configs/lp8x4x_defconfig
diff --git a/board/icpdas/lp8x4x/Makefile b/board/icpdas/lp8x4x/Makefile
deleted file mode 100644
index 88e0606e1e..0000000000
--- a/board/icpdas/lp8x4x/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# ICPDAS LP-8x4x Support
-#
-# Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= lp8x4x.o
diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c
deleted file mode 100644
index a136dc4c37..0000000000
--- a/board/icpdas/lp8x4x/lp8x4x.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * ICP DAS LP-8x4x Support
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * adapted from Voipac PXA270 Support by
- * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-mmc.h>
-#include <asm/arch/pxa.h>
-#include <netdev.h>
-#include <serial.h>
-#include <asm/io.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	pxa2xx_dram_init();
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef	CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	pxa_mmc_register(0);
-	return 0;
-}
-#endif
-
-#ifdef	CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
-	if (index !=0 || init != USB_INIT_HOST)
-		return -1;
-
-	writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
-
-	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
-	udelay(11);
-	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
-	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
-	while (readl(UHCHR) & UHCHR_FSBIR)
-		continue; /* required by checkpath.pl */
-
-	writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
-	writel(readl(UHCRHDA) & ~(0x1000), UHCRHDA);
-	writel(readl(UHCRHDA) | 0x800, UHCRHDA);
-
-	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
-	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
-	/* Clear any OTG Pin Hold */
-	if (readl(PSSR) & PSSR_OTGPH)
-		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
-	writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
-	writel(readl(UHCRHDA) | 0x100, UHCRHDA);
-
-	/* Set port power control mask bits, only 3 ports. */
-	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
-
-	return 0;
-}
-
-int usb_board_stop(void)
-{
-	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
-	udelay(11);
-	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
-	writel(readl(UHCCOMS) | 1, UHCCOMS);
-	udelay(10);
-
-	writel(readl(UHCHR) | UHCHR_SSEP0 | UHCHR_SSE, UHCHR);
-
-	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	if (index !=0 || init != USB_INIT_HOST)
-		return -1;
-
-	return usb_board_stop();
-}
-#endif
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-	return dm9000_initialize(bis);
-}
-#endif