Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx

24 files changed, 2178 insertions, 842 deletions

diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index b2666dd83b..0d2f27fe52 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -294,4 +294,4 @@ U_BOOT_CMD(
 	-----------------------------------------------\n"
 	);
 
-#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+#endif	/* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index b2666dd83b..0d2f27fe52 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -294,4 +294,4 @@ U_BOOT_CMD(
 	-----------------------------------------------\n"
 	);
 
-#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+#endif	/* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 306c92c157..46a37c6a20 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,7 +25,7 @@
 #include <asm-ppc/mmu.h>
 #include <config.h>
 
-/**************************************************************************
+/*
  * TLB TABLE
  *
  * This table is used by the cpu boot code to setup the initial tlb
@@ -31,8 +33,7 @@
  * this table lets each board set things up however they like.
  *
  *  Pointer to the table is returned in r1
- *
- *************************************************************************/
+ */
     .section .bootpg,"ax"
     .globl tlbtab
 
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index e46efef10a..ce0537f220 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -4,7 +4,7 @@
  *
  * (C) Copyright 2006
  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -29,11 +29,12 @@
 #include <asm/gpio.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/bitops.h>
 #include <asm/ppc4xx-intvec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (ulong base, int banknum);
 
@@ -46,9 +47,9 @@ int board_early_init_f(void)
 	mtdcr(ebccfga, xbcfg);
 	mtdcr(ebccfgd, 0xb8400000);
 
-	/*--------------------------------------------------------------------
+	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
+	 */
 	mtdcr(uic0sr, 0xffffffff);	/* clear all */
 	mtdcr(uic0er, 0x00000000);	/* disable all */
 	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
@@ -87,9 +88,11 @@ int board_early_init_f(void)
 
 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
-	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+		SDR0_PFC1_SELECT_CONFIG_4;
 	mfsdr(SDR0_PFC2, sdr0_pfc2);
-	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+		SDR0_PFC2_SELECT_CONFIG_4;
 	mtsdr(SDR0_PFC2, sdr0_pfc2);
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 
@@ -109,9 +112,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-/*---------------------------------------------------------------------------+
-  | misc_init_r.
-  +---------------------------------------------------------------------------*/
 int misc_init_r(void)
 {
 	uint pbcr;
@@ -124,11 +124,7 @@ int misc_init_r(void)
 	char *act = getenv("usbact");
 #endif
 
-	/*
-	 * FLASH stuff...
-	 */
-
-	/* Re-do sizing to get full correct info */
+	/* Re-do flash sizing to get full correct info */
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -140,32 +136,7 @@ int misc_init_r(void)
 	mtdcr(ebccfga, pb0cr);
 #endif
 	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
+        size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 	mtdcr(ebccfga, pb3cr);
@@ -197,7 +168,7 @@ int misc_init_r(void)
 	 * USB suff...
 	 */
 #ifdef CONFIG_440EPX
-	if (act == NULL || strcmp(act, "hostdev") == 0)	{
+	if (act == NULL || strcmp(act, "hostdev") == 0) {
 		/* SDR Setting */
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
 		mfsdr(SDR0_USB2D0CR, usb2d0cr);
@@ -205,27 +176,32 @@ int misc_init_r(void)
 		mfsdr(SDR0_USB2H0CR, usb2h0cr);
 
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
 
-		/* An 8-bit/60MHz interface is the only possible alternative
-		   when connecting the Device to the PHY */
+		/*
+		 * An 8-bit/60MHz interface is the only possible alternative
+		 * when connecting the Device to the PHY
+		 */
 		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
 
-		/* To enable the USB 2.0 Device function through the UTMI interface */
+		/*
+		 * To enable the USB 2.0 Device function
+		 * through the UTMI interface
+		 */
 		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;		/*1*/
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
 
 		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;		/*0*/
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
 
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
 		mtsdr(SDR0_USB2D0CR, usb2d0cr);
@@ -245,13 +221,13 @@ int misc_init_r(void)
 		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 
 		udelay (1000);
@@ -276,31 +252,31 @@ int misc_init_r(void)
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
 
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
 
 		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;		/*0*/
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
 
 		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;		/*0*/
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
 
 		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;		/*1*/
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
 
 		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mtsdr(SDR0_USB2D0CR, usb2d0cr);
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
 
-		/*clear resets*/
+		/* clear resets */
 		udelay (1000);
 		mtsdr(SDR0_SRST1, 0x00000000);
 		udelay (1000);
@@ -398,43 +374,42 @@ void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 }
 #endif
 
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
+/*
+ * pci_pre_init
  *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
  *
- ************************************************************************/
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
 #if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
 
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
+	/*
+	 * Set priority for all PLB3 devices to 0.
+	 * Set PLB3 arbiter to fair mode.
+	 */
 	mfsdr(sdr_amp1, addr);
 	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb3_acr);
 	mtdcr(plb3_acr, addr | 0x80000000);
 
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
+	/*
+	 * Set priority for all PLB4 devices to 0.
+	 */
 	mfsdr(sdr_amp0, addr);
 	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
 	mtdcr(plb4_acr, addr);
 
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
+	/*
+	 * Set Nebula PLB4 arbiter to fair mode.
+	 */
 	/* Segment0 */
 	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
 	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
@@ -456,47 +431,51 @@ int pci_pre_init(struct pci_controller *hose)
 }
 #endif /* defined(CONFIG_PCI) */
 
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
+/*
+ * pci_target_init
  *
- ************************************************************************/
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
-	/*--------------------------------------------------------------------------+
+	/*
 	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440EPX PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	 */
+	/*
+	 * PowerPC440EPX PCI Master configuration.
+	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	 * PLB address 0xA0000000-0xDFFFFFFF
+	 *     ==> PCI address 0xA0000000-0xDFFFFFFF
+	 * Use byte reversed out routines to handle endianess.
+	 * Make this region non-prefetchable.
+	 */
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+						/* - disabled b4 setting */
 	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
+						/* and enable region */
 
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
+						/* - disabled b4 setting */
 	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
+						/* and enable region */
 
 	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM1LA, 0);		/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);		/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);		/* Local Addr. Reg */
 
-	/*--------------------------------------------------------------------------+
+	/*
 	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
+	 */
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
@@ -515,51 +494,46 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
 #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
 
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
+	/*
+	 * Write the PowerPC440 EP PCI Configuration regs.
+	 * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	 * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	 */
 	pci_read_config_word(0, PCI_COMMAND, &temp_short);
 	pci_write_config_word(0, PCI_COMMAND,
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
 
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
+/*
+ * is_pci_host
  *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
  *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
  *
- ************************************************************************/
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
 #if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
 	/* Cactus is always configured as host. */
 	return (1);
 }
-#endif				/* defined(CONFIG_PCI) */
+#endif /* defined(CONFIG_PCI) */
+
 #if defined(CONFIG_POST)
 /*
  * Returns 1 if keys pressed to start the power-on long-running tests
diff --git a/board/esd/du440/Makefile b/board/esd/du440/Makefile
new file mode 100644
index 0000000000..e996a0a8c3
--- /dev/null
+++ b/board/esd/du440/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o
+SOBJS	= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/esd/du440/config.mk b/board/esd/du440/config.mk
new file mode 100644
index 0000000000..5164334500
--- /dev/null
+++ b/board/esd/du440/config.mk
@@ -0,0 +1,37 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
new file mode 100644
index 0000000000..ceb128c148
--- /dev/null
+++ b/board/esd/du440/du440.c
@@ -0,0 +1,1018 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <command.h>
+#include <i2c.h>
+#include <ppc440.h>
+#include "du440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+extern ulong flash_get_size (ulong base, int banknum);
+
+int usbhub_init(void);
+int dvi_init(void);
+int eeprom_write_enable (unsigned dev_addr, int state);
+int board_revision(void);
+
+static int du440_post_errors;
+
+int board_early_init_f(void)
+{
+	u32 sdr0_cust0;
+	u32 sdr0_pfc1, sdr0_pfc2;
+	u32 reg;
+
+	mtdcr(ebccfga, xbcfg);
+	mtdcr(ebccfgd, 0xb8400000);
+
+	/*
+	 * Setup the GPIO pins
+	 */
+	out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_TCR, 0x0000000f | CFG_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_OSRL, 0x50055400);
+	out_be32((void*)GPIO0_OSRH, 0x550050aa);
+	out_be32((void*)GPIO0_TSRL, 0x50055400);
+	out_be32((void*)GPIO0_TSRH, 0x55005000);
+	out_be32((void*)GPIO0_ISR1L, 0x50000000);
+	out_be32((void*)GPIO0_ISR1H, 0x00000000);
+	out_be32((void*)GPIO0_ISR2L, 0x00000000);
+	out_be32((void*)GPIO0_ISR2H, 0x00000100);
+	out_be32((void*)GPIO0_ISR3L, 0x00000000);
+	out_be32((void*)GPIO0_ISR3H, 0x00000000);
+
+	out_be32((void*)GPIO1_OR, 0x00000000);
+	out_be32((void*)GPIO1_TCR, 0xc2000000 |
+		 CFG_GPIO1_IORSTN |
+		 CFG_GPIO1_LEDUSR1 |
+		 CFG_GPIO1_LEDUSR2 |
+		 CFG_GPIO1_LEDPOST |
+		 CFG_GPIO1_LEDDU);
+	out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU);
+
+	out_be32((void*)GPIO1_OSRL, 0x5c280000);
+	out_be32((void*)GPIO1_OSRH, 0x00000000);
+	out_be32((void*)GPIO1_TSRL, 0x0c000000);
+	out_be32((void*)GPIO1_TSRH, 0x00000000);
+	out_be32((void*)GPIO1_ISR1L, 0x00005550);
+	out_be32((void*)GPIO1_ISR1H, 0x00000000);
+	out_be32((void*)GPIO1_ISR2L, 0x00050000);
+	out_be32((void*)GPIO1_ISR2H, 0x00000000);
+	out_be32((void*)GPIO1_ISR3L, 0x01400000);
+	out_be32((void*)GPIO1_ISR3H, 0x00000000);
+
+	/*
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffff7ff);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x00000000);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	/*
+	 * UIC1:
+	 *  bit30: ext. Irq 1: PLD : int 32+30
+	 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xfffffffd);
+	mtdcr(uic1tr, 0x00000000);
+	mtdcr(uic1vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*
+	 * UIC2
+	 *  bit3: ext. Irq 2: DCF77 : int 64+3
+	 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+	mtdcr(uic2er, 0x00000000);	/* disable all */
+	mtdcr(uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic2pr, 0xffffffff);	/* per ref-board manual */
+	mtdcr(uic2tr, 0x00000000);	/* per ref-board manual */
+	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+
+	/* select Ethernet pins */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	mfsdr(SDR0_PFC2, sdr0_pfc2);
+
+	/* setup EMAC bridge interface */
+	if (board_revision() == 0) {
+		/* 1 x MII */
+		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+			SDR0_PFC1_SELECT_CONFIG_1_2;
+		sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+			SDR0_PFC2_SELECT_CONFIG_1_2;
+	} else {
+		/* 2 x SMII */
+		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+			SDR0_PFC1_SELECT_CONFIG_6;
+		sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+			SDR0_PFC2_SELECT_CONFIG_6;
+	}
+
+	/* enable 2nd IIC */
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
+
+	mtsdr(SDR0_PFC2, sdr0_pfc2);
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+	/* PCI arbiter enabled */
+	mfsdr(sdr_pci0, reg);
+	mtsdr(sdr_pci0, 0x80000000 | reg);
+
+	/* setup NAND FLASH */
+	mfsdr(SDR0_CUST0, sdr0_cust0);
+	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
+		SDR0_CUST0_NDFC_ENABLE		|
+		SDR0_CUST0_NDFC_BW_8_BIT	|
+		SDR0_CUST0_NDFC_ARE_MASK	|
+		(0x80000000 >> (28 + CFG_NAND0_CS)) |
+		(0x80000000 >> (28 + CFG_NAND1_CS));
+	mtsdr(SDR0_CUST0, sdr0_cust0);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	uint pbcr;
+	int size_val = 0;
+	u32 reg;
+	unsigned long usb2d0cr = 0;
+	unsigned long usb2phy0cr, usb2h0cr = 0;
+	unsigned long sdr0_pfc1;
+	int i, j;
+
+	/* adjust flash start and offset */
+	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	gd->bd->bi_flashoffset = 0;
+
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	size_val = ffs(gd->bd->bi_flashsize) - 21;
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+	mtdcr(ebccfga, pb0cr);
+	mtdcr(ebccfgd, pbcr);
+
+	/*
+	 * Re-check to get correct base address
+	 */
+	flash_get_size(gd->bd->bi_flashstart, 0);
+
+	/*
+	 * USB suff...
+	 */
+	/* SDR Setting */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	mfsdr(SDR0_USB0, usb2d0cr);
+	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+	mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
+
+	/* An 8-bit/60MHz interface is the only possible alternative
+	   when connecting the Device to the PHY */
+	usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
+
+	/* To enable the USB 2.0 Device function through the UTMI interface */
+	usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+
+	sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+	sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
+
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+	mtsdr(SDR0_USB0, usb2d0cr);
+	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+	mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+	/* clear resets */
+	udelay (1000);
+	mtsdr(SDR0_SRST1, 0x00000000);
+	udelay (1000);
+	mtsdr(SDR0_SRST0, 0x00000000);
+
+	printf("USB:   Host(int phy)\n");
+
+	/*
+	 * Clear PLB4A0_ACR[WRP]
+	 * This fix will make the MAL burst disabling patch for the Linux
+	 * EMAC driver obsolete.
+	 */
+	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+	mtdcr(plb4_acr, reg);
+
+	/*
+	 * release IO-RST#
+	 * We have to wait at least 560ms until we may call usbhub_init
+	 */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_IORSTN);
+
+	/*
+	 * flash USR1/2 LEDs (600ms)
+	 * This results in the necessary delay from IORST# until
+	 * calling usbhub_init will succeed
+	 */
+	for (j = 0; j < 3; j++) {
+		out_be32((void*)GPIO1_OR,
+			 (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR2) |
+			 CFG_GPIO1_LEDUSR1);
+
+		for (i = 0; i < 100; i++)
+			udelay(1000);
+
+		out_be32((void*)GPIO1_OR,
+			 (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR1) |
+			 CFG_GPIO1_LEDUSR2);
+
+		for (i = 0; i < 100; i++)
+			udelay(1000);
+	}
+
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) &
+		 ~(CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2));
+
+	if (usbhub_init())
+		du440_post_errors++;
+
+	if (dvi_init())
+		du440_post_errors++;
+
+	return 0;
+}
+
+int pld_revision(void)
+{
+	out8(CFG_CPLD_BASE, 0x00);
+	return (int)(in8(CFG_CPLD_BASE) & CPLD_VERSION_MASK);
+}
+
+int board_revision(void)
+{
+	int rpins = (int)((in_be32((void*)GPIO1_IR) & CFG_GPIO1_HWVER_MASK)
+			  >> CFG_GPIO1_HWVER_SHIFT);
+
+	return ((rpins & 1) << 3) | ((rpins & 2) << 1) |
+		((rpins & 4) >> 1) | ((rpins & 8) >> 3);
+}
+
+#if defined(CONFIG_SHOW_ACTIVITY)
+void board_show_activity (ulong timestamp)
+{
+	if ((timestamp % 100) == 0)
+		out_be32((void*)GPIO1_OR,
+			 in_be32((void*)GPIO1_OR) ^ CFG_GPIO1_LEDUSR1);
+}
+
+void show_activity(int arg)
+{
+}
+#endif /* CONFIG_SHOW_ACTIVITY */
+
+int du440_phy_addr(int devnum)
+{
+	if (board_revision() == 0)
+		return devnum;
+
+	return devnum + 1;
+}
+
+int checkboard(void)
+{
+	char serno[32];
+
+	puts("Board: DU440");
+
+	if (getenv_r("serial#", serno, sizeof(serno)) > 0) {
+		puts(", serial# ");
+		puts(serno);
+	}
+
+	printf(", HW-Rev. 1.%d, CPLD-Rev. 1.%d\n",
+	       board_revision(), pld_revision());
+	return (0);
+}
+
+/*
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long addr;
+
+	/*
+	 * Set priority for all PLB3 devices to 0.
+	 * Set PLB3 arbiter to fair mode.
+	 */
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*
+	 * Set priority for all PLB4 devices to 0.
+	 */
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*
+	 * Set Nebula PLB4 arbiter to fair mode.
+	 */
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*
+	 * Set up Direct MMIO registers
+	 */
+	/*
+	 * PowerPC440EPX PCI Master configuration.
+	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	 * PLB address 0xA0000000-0xDFFFFFFF
+	 *     ==> PCI address 0xA0000000-0xDFFFFFFF
+	 * Use byte reversed out routines to handle endianess.
+	 * Make this region non-prefetchable.
+	 */
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+						/* - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
+						/* and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
+						/* - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
+						/* and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);		/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);		/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);		/* Local Addr. Reg */
+
+	/*
+	 * Set up Configuration registers
+	 */
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      PCI_VENDOR_ID_ESDGMBH);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, PCI_DEVICE_ID_DU440);
+
+	pci_write_config_word(0, PCI_CLASS_SUB_CODE, PCI_CLASS_BRIDGE_HOST);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*
+	 * Write the PowerPC440 EP PCI Configuration regs.
+	 * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	 * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	 */
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* always configured as host. */
+	return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+int last_stage_init(void)
+{
+	int e, i;
+
+	/* everyting is ok: turn on POST-LED */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+
+	/* slowly blink on errors and finally keep LED off */
+	for (e = 0; e < du440_post_errors; e++) {
+		out_be32((void*)GPIO1_OR,
+			 in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+
+		for (i = 0; i < 500; i++)
+			udelay(1000);
+
+		out_be32((void*)GPIO1_OR,
+			 in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDPOST);
+
+		for (i = 0; i < 500; i++)
+			udelay(1000);
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * read field strength from I2C ADC
+ */
+int dcf77_status(void)
+{
+	unsigned int oldbus;
+	uchar u[2];
+	int mv;
+
+	oldbus = I2C_GET_BUS();
+	I2C_SET_BUS(1);
+
+	if (i2c_read (IIC1_MCP3021_ADDR, 0, 0, u, 2)) {
+		I2C_SET_BUS(oldbus);
+		return -1;
+	}
+
+	mv = (int)(((u[0] << 8) | u[1]) >> 2) * 3300 / 1024;
+
+	I2C_SET_BUS(oldbus);
+	return mv;
+}
+
+int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int mv;
+	u32 pin, pinold;
+	unsigned long long t1, t2;
+	bd_t *bd = gd->bd;
+
+	printf("DCF77: ");
+	mv = dcf77_status();
+	if (mv > 0)
+		printf("signal=%d mV\n", mv);
+	else
+		printf("ERROR - no signal\n");
+
+	t1 = t2 = 0;
+	pinold = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+	while (!ctrlc()) {
+		pin = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+		if (pin && !pinold) { /* bit start */
+			t1 = get_ticks();
+			if (t2 && ((unsigned int)(t1 - t2) /
+				   (bd->bi_procfreq / 1000) >= 1800))
+				printf("Start of minute\n");
+
+			t2 = t1;
+		}
+		if (t1 && !pin && pinold) { /* bit end */
+			printf("%5d\n", (unsigned int)(get_ticks() - t1) /
+			       (bd->bi_procfreq / 1000));
+		}
+		pinold = pin;
+	}
+
+	printf("Abort\n");
+	return 0;
+}
+U_BOOT_CMD(
+	dcf77, 1, 1, do_dcf77,
+	"dcf77   - Check DCF77 receiver\n",
+	NULL
+	);
+
+/*
+ * initialize USB hub via I2C1
+ */
+int usbhub_init(void)
+{
+	int reg;
+	int ret = 0;
+	unsigned int oldbus;
+	uchar u[] = {0x04, 0x24, 0x04, 0x07, 0x25, 0x00, 0x00, 0xd3,
+		     0x18, 0xe0, 0x00, 0x00, 0x01, 0x64, 0x01, 0x64,
+		     0x32};
+	uchar stcd;
+
+	printf("Hub:   ");
+
+	oldbus = I2C_GET_BUS();
+	I2C_SET_BUS(1);
+
+	for (reg = 0; reg < sizeof(u); reg++)
+		if (i2c_write (IIC1_USB2507_ADDR, reg, 1, &u[reg], 1)) {
+			ret = -1;
+			break;
+		}
+
+	if (ret == 0) {
+		stcd = 0x03;
+		if (i2c_write (IIC1_USB2507_ADDR, 0, 1, &stcd, 1))
+			ret = -1;
+	}
+
+	if (ret == 0)
+		printf("initialized\n");
+	else
+		printf("failed - cannot initialize USB hub\n");
+
+	I2C_SET_BUS(oldbus);
+	return ret;
+}
+
+int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	usbhub_init();
+	return 0;
+}
+U_BOOT_CMD(
+	hubinit, 1, 1, do_hubinit,
+	"hubinit - Initialize USB hub\n",
+	NULL
+	);
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+int boot_eeprom_write (unsigned dev_addr,
+		       unsigned offset,
+		       uchar *buffer,
+		       unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+#if defined(CFG_EEPROM_WREN)
+	eeprom_write_enable(dev_addr, 1);
+#endif
+	/*
+	 * Write data until done or would cross a write page boundary.
+	 * We must write the address again when changing pages
+	 * because the address counter only increments within a page.
+	 */
+
+	while (offset < end) {
+		unsigned alen, len;
+		unsigned maxlen;
+
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen = 2;
+		addr[0] |= dev_addr;		/* insert device address */
+
+		len = end - offset;
+
+		/*
+		 * For a FRAM device there is no limit on the number of the
+		 * bytes that can be ccessed with the single read or write
+		 * operation.
+		 */
+#if defined(CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+
+#define	BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
+
+		maxlen = BOOT_EEPROM_PAGE_SIZE -
+			BOOT_EEPROM_PAGE_OFFSET(blk_off);
+#else
+		maxlen = 0x100 - blk_off;
+#endif
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+
+		if (len > maxlen)
+			len = maxlen;
+
+		if (i2c_write (addr[0], offset, alen - 1, buffer, len) != 0)
+			rcode = 1;
+
+		buffer += len;
+		offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+	}
+#if defined(CFG_EEPROM_WREN)
+	eeprom_write_enable(dev_addr, 0);
+#endif
+	return rcode;
+}
+
+int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong sdsdp[4];
+
+	if (argc > 1) {
+		if (!strcmp(argv[1], "533")) {
+			printf("Bootstrapping for 533MHz\n");
+			sdsdp[0] = 0x87788252;
+			/* PLB-PCI-divider = 3 : sync PCI clock=44MHz */
+			sdsdp[1] = 0x095fa030;
+			sdsdp[2] = 0x40082350;
+			sdsdp[3] = 0x0d050000;
+		} else if (!strcmp(argv[1], "533-66")) {
+			printf("Bootstrapping for 533MHz (66MHz PCI)\n");
+			sdsdp[0] = 0x87788252;
+			/* PLB-PCI-divider = 2 : sync PCI clock=66MHz */
+			sdsdp[1] = 0x0957a030;
+			sdsdp[2] = 0x40082350;
+			sdsdp[3] = 0x0d050000;
+		} else if (!strcmp(argv[1], "667")) {
+			printf("Bootstrapping for 667MHz\n");
+			sdsdp[0] = 0x8778a256;
+			/* PLB-PCI-divider = 4 : sync PCI clock=33MHz */
+			sdsdp[1] = 0x0947a030;
+			/* PLB-PCI-divider = 3 : sync PCI clock=44MHz
+			 * -> not working when overclocking 533MHz chips
+			 * -> untested on 667MHz chips */
+			/* sdsdp[1]=0x095fa030; */
+			sdsdp[2] = 0x40082350;
+			sdsdp[3] = 0x0d050000;
+		}
+	} else {
+		printf("Bootstrapping for 533MHz (default)\n");
+		sdsdp[0] = 0x87788252;
+		/* PLB-PCI-divider = 3 : sync PCI clock=44MHz */
+		sdsdp[1] = 0x095fa030;
+		sdsdp[2] = 0x40082350;
+		sdsdp[3] = 0x0d050000;
+	}
+
+	printf("Writing boot EEPROM ...\n");
+	if (boot_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+			      0, (uchar*)sdsdp, 16) != 0)
+		printf("boot_eeprom_write failed\n");
+	else
+		printf("done (dump via 'i2c md 52 0.1 10')\n");
+
+	return 0;
+}
+U_BOOT_CMD(
+	sbe, 2, 0, do_setup_boot_eeprom,
+	"sbe     - setup boot eeprom\n",
+	NULL
+	);
+
+#if defined(CFG_EEPROM_WREN)
+/*
+ * Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *                      0: disable write
+ *                      1: enable write
+ * Returns:            -1: wrong device address
+ *                      0: dis-/en- able done
+ *                    0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+	if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
+	    (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr))
+		return -1;
+	else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO_SINT2. */
+			out_be32((void*)GPIO0_OR,
+				 in_be32((void*)GPIO0_OR) & ~CFG_GPIO0_EP_EEP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO_SINT2. */
+			out_be32((void*)GPIO0_OR,
+				 in_be32((void*)GPIO0_OR) | CFG_GPIO0_EP_EEP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32((void*)GPIO0_OR) &
+				       CFG_GPIO0_EP_EEP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0)
+			puts ("Query of write access state failed.\n");
+		else {
+			printf ("Write access for device 0x%0x is %sabled.\n",
+				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0)
+			puts ("Setup of write access state failed.\n");
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+static int got_pldirq;
+
+static int pld_interrupt(u32 arg)
+{
+	int rc = -1; /* not for us */
+	u8 status = in8(CFG_CPLD_BASE);
+
+	/* check for PLD interrupt */
+	if (status & PWR_INT_FLAG) {
+		/* reset this int */
+		out8(CFG_CPLD_BASE, 0);
+		rc = 0;
+		got_pldirq = 1; /* trigger backend */
+	}
+
+	return rc;
+}
+
+int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	got_pldirq = 0;
+
+	/* clear any pending interrupt */
+	out8(CFG_CPLD_BASE, 0);
+
+	irq_install_handler(CPLD_IRQ,
+			    (interrupt_handler_t *)pld_interrupt, 0);
+
+	printf("Waiting ...\n");
+	while(!got_pldirq) {
+		/* Abort if ctrl-c was pressed */
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			break;
+		}
+	}
+	if (got_pldirq) {
+		printf("Got interrupt!\n");
+		printf("Power %sready!\n",
+		       in8(CFG_CPLD_BASE) & PWR_RDY ? "":"NOT ");
+	}
+
+	irq_free_handler(CPLD_IRQ);
+	return 0;
+}
+U_BOOT_CMD(
+	wpi,	1,	1,	do_waitpwrirq,
+	"wpi     - Wait for power change interrupt\n",
+	NULL
+	);
+
+/*
+ * initialize DVI panellink transmitter
+ */
+int dvi_init(void)
+{
+	int i;
+	int ret = 0;
+	unsigned int oldbus;
+	uchar u[] = {0x08, 0x34,
+		     0x09, 0x20,
+		     0x0a, 0x90,
+		     0x0c, 0x89,
+		     0x08, 0x35};
+
+	printf("DVI:   ");
+
+	oldbus = I2C_GET_BUS();
+	I2C_SET_BUS(0);
+
+	for (i = 0; i < sizeof(u); i += 2)
+		if (i2c_write (0x38, u[i], 1, &u[i + 1], 1)) {
+			ret = -1;
+			break;
+		}
+
+	if (ret == 0)
+		printf("initialized\n");
+	else
+		printf("failed - cannot initialize DVI transmitter\n");
+
+	I2C_SET_BUS(oldbus);
+	return ret;
+}
+
+int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	dvi_init();
+	return 0;
+}
+U_BOOT_CMD(
+	dviinit, 1, 1, do_dviinit,
+	"dviinit - Initialize DVI Panellink transmitter\n",
+	NULL
+	);
+
+/*
+ * TODO: 'time' command might be useful for others as well.
+ *       Move to 'common' directory.
+ */
+int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned long long start, end;
+	char c, cmd[CFG_CBSIZE];
+	char *p, *d = cmd;
+	int ret, i;
+	ulong us;
+
+	for (i = 1; i < argc; i++) {
+		p = argv[i];
+
+		if (i > 1)
+			*d++ = ' ';
+
+		while ((c = *p++) != '\0') {
+			*d++ = c;
+		}
+	}
+	*d = '\0';
+
+	start = get_ticks();
+	ret = run_command (cmd, 0);
+	end = get_ticks();
+
+	printf("ticks=%d\n", (ulong)(end - start));
+	us = (ulong)((1000L * (end - start)) / (get_tbclk() / 1000));
+	printf("usec=%d\n", us);
+
+	return ret;
+}
+U_BOOT_CMD(
+	time,	CFG_MAXARGS,	1,	do_time,
+	"time    - run command and output execution time\n",
+	NULL
+	);
+
+extern void video_hw_rectfill (
+	unsigned int bpp,		/* bytes per pixel */
+	unsigned int dst_x,		/* dest pos x */
+	unsigned int dst_y,		/* dest pos y */
+	unsigned int dim_x,		/* frame width */
+	unsigned int dim_y,		/* frame height */
+	unsigned int color		/* fill color */
+	);
+
+/*
+ * graphics demo
+ * draw rectangles using pseudorandom number generator
+ * (see http://www.embedded.com/columns/technicalinsights/20900500)
+ */
+unsigned int rprime = 9972;
+static unsigned int r;
+static unsigned int Y;
+
+unsigned int prng(unsigned int max)
+{
+	if (r == 0 || r == 1 || r == -1)
+		r = rprime; /* keep from getting stuck */
+
+	r = (9973 * ~r) + ((Y) % 701); /* the actual algorithm */
+	Y = (r >> 16) % max; /* choose upper bits and reduce */
+	return Y;
+}
+
+int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned int color;
+	unsigned int x, y, dx, dy;
+
+	while (!ctrlc()) {
+		x = prng(1280 - 1);
+		y = prng(1024 - 1);
+		dx = prng(1280- x - 1);
+		dy = prng(1024 - y - 1);
+		color = prng(0x10000);
+		video_hw_rectfill(2, x, y, dx, dy, color);
+	}
+
+	return 0;
+}
+U_BOOT_CMD(
+	gfxdemo,	CFG_MAXARGS,	1,	do_gfxdemo,
+	"gfxdemo - demo\n",
+	NULL
+	);
diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h
new file mode 100644
index 0000000000..5c362e4818
--- /dev/null
+++ b/board/esd/du440/du440.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDR0_USB0		0x0320     /* USB Control Register */
+
+#define CFG_GPIO0_EP_EEP	(0x80000000 >> 23)       /* GPIO0_23 */
+#define CFG_GPIO1_DCF77		(0x80000000 >> (42-32))  /* GPIO1_42 */
+
+#define CFG_GPIO1_IORSTN	(0x80000000 >> (55-32))  /* GPIO1_55 */
+
+#define CFG_GPIO1_HWVER_MASK	0x000000f0 /* GPIO1_56-59 */
+#define CFG_GPIO1_HWVER_SHIFT	4
+#define CFG_GPIO1_LEDUSR1	0x00000008 /* GPIO1_60 */
+#define CFG_GPIO1_LEDUSR2	0x00000004 /* GPIO1_61 */
+#define CFG_GPIO1_LEDPOST	0x00000002 /* GPIO1_62 */
+#define CFG_GPIO1_LEDDU		0x00000001 /* GPIO1_63 */
+
+#define CPLD_VERSION_MASK	0x0f
+#define PWR_INT_FLAG		0x80
+#define PWR_RDY			0x10
+
+#define CPLD_IRQ		(32+30)
+
+#define PCI_VENDOR_ID_ESDGMBH	0x12fe
+#define PCI_DEVICE_ID_DU440	0x0444
diff --git a/board/esd/du440/init.S b/board/esd/du440/init.S
new file mode 100644
index 0000000000..4390b50744
--- /dev/null
+++ b/board/esd/du440/init.S
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
+#include <config.h>
+
+/*
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ */
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+
+#ifdef CFG_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+	/* TLB-entry for PCI Memory */
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M,  CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entry for PCI IO */
+	tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entries for EBC:	 CPLD, DUMEM, DUIO */
+	tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for NAND */
+	tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for Internal Registers & OCM */
+	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
+
+	/* TLB-entry PCI registers */
+	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for peripherals */
+	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	tlbtab_end
diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds
new file mode 100644
index 0000000000..e140737373
--- /dev/null
+++ b/board/esd/du440/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 199c1ff9da..90fd0a7532 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -2,12 +2,12 @@
  * (C) Copyright 2007-2008
  * Larry Johnson, lrj@acm.org
  *
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -26,15 +26,16 @@
  */
 
 #include <common.h>
-#include <asm/gpio.h>
-#include <asm/processor.h>
-#include <asm-ppc/io.h>
 #include <i2c.h>
 #include <ppc440.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size(ulong base, int banknum);
 
@@ -47,9 +48,9 @@ int board_early_init_f(void)
 	mtdcr(ebccfga, xbcfg);
 	mtdcr(ebccfgd, 0xb8400000);
 
-	/*--------------------------------------------------------------------
+	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
+	 */
 	mtdcr(uic0sr, 0xffffffff);	/* clear all */
 	mtdcr(uic0er, 0x00000000);	/* disable all */
 	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
@@ -101,10 +102,10 @@ int board_early_init_f(void)
 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
 	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
-	    SDR0_PFC1_SELECT_CONFIG_4;
+		SDR0_PFC1_SELECT_CONFIG_4;
 	mfsdr(SDR0_PFC2, sdr0_pfc2);
 	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
-	    SDR0_PFC2_SELECT_CONFIG_4;
+		SDR0_PFC2_SELECT_CONFIG_4;
 	mtsdr(SDR0_PFC2, sdr0_pfc2);
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 
@@ -221,9 +222,6 @@ static void set_mac_addresses(void)
 	}
 }
 
-/*---------------------------------------------------------------------------+
-  | misc_init_r.
-  +---------------------------------------------------------------------------*/
 int misc_init_r(void)
 {
 	uint pbcr;
@@ -234,11 +232,7 @@ int misc_init_r(void)
 	unsigned long sdr0_pfc1;
 	char *act = getenv("usbact");
 
-	/*
-	 * FLASH stuff...
-	 */
-
-	/* Re-do sizing to get full correct info */
+	/* Re-do flash sizing to get full correct info */
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -246,32 +240,7 @@ int misc_init_r(void)
 
 	mtdcr(ebccfga, pb0cr);
 	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
+	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 	mtdcr(ebccfga, pb0cr);
 	mtdcr(ebccfgd, pbcr);
@@ -286,8 +255,7 @@ int misc_init_r(void)
 			    &flash_info[0]);
 
 	/* Env protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
+	(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
 			    CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1,
 			    &flash_info[0]);
 
@@ -301,35 +269,40 @@ int misc_init_r(void)
 		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mfsdr(SDR0_USB2H0CR, usb2h0cr);
 
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;	/*1 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;	/*1 */
-
-		/* An 8-bit/60MHz interface is the only possible alternative
-		   when connecting the Device to the PHY */
-		usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1 */
-
-		/* To enable the USB 2.0 Device function through the UTMI interface */
-		usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;	/*1 */
-
-		sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;	/*0 */
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
+
+		/*
+		 * An 8-bit/60MHz interface is the only possible alternative
+		 * when connecting the Device to the PHY
+		 */
+		usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
+
+		/*
+		 * To enable the USB 2.0 Device function
+		 * through the UTMI interface
+		 */
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
+
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
 
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
 		mtsdr(SDR0_USB2D0CR, usb2d0cr);
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
-		/*clear resets */
+		/* clear resets */
 		udelay(1000);
 		mtsdr(SDR0_SRST1, 0x00000000);
 		udelay(1000);
@@ -341,14 +314,14 @@ int misc_init_r(void)
 		/*-------------------PATCH-------------------------------*/
 		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;	/*1 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;	/*1 */
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 
 		udelay(1000);
@@ -372,32 +345,32 @@ int misc_init_r(void)
 		mfsdr(SDR0_USB2D0CR, usb2d0cr);
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
 
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;	/*1 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;	/*0 */
-		usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
-		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;	/*0 */
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
 
-		usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
-		usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;	/*0 */
+		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
 
-		usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;	/*0 */
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
 
-		sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
-		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;	/*1 */
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
 
 		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mtsdr(SDR0_USB2D0CR, usb2d0cr);
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
 
-		/*clear resets */
+		/* clear resets */
 		udelay(1000);
 		mtsdr(SDR0_SRST1, 0x00000000);
 		udelay(1000);
@@ -406,7 +379,7 @@ int misc_init_r(void)
 		printf("USB:   Device(int phy)\n");
 	}
 
-	mfsdr(SDR0_SRST1, reg);	/* enable security/kasumi engines */
+	mfsdr(SDR0_SRST1, reg);		/* enable security/kasumi engines */
 	reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
 	mtsdr(SDR0_SRST1, reg);
 
@@ -486,43 +459,42 @@ int testdram(void)
 }
 #endif /* defined(CFG_DRAM_TEST) */
 
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
+/*
+ * pci_pre_init
  *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
  *
- ************************************************************************/
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
 #if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
 
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
+	/*
+	 * Set priority for all PLB3 devices to 0.
+	 * Set PLB3 arbiter to fair mode.
+	 */
 	mfsdr(sdr_amp1, addr);
 	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb3_acr);
 	mtdcr(plb3_acr, addr | 0x80000000);
 
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
+	/*
+	 * Set priority for all PLB4 devices to 0.
+	 */
 	mfsdr(sdr_amp0, addr);
 	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
 	mtdcr(plb4_acr, addr);
 
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
+	/*
+	 * Set Nebula PLB4 arbiter to fair mode.
+	 */
 	/* Segment0 */
 	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
 	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
@@ -541,47 +513,51 @@ int pci_pre_init(struct pci_controller *hose)
 }
 #endif /* defined(CONFIG_PCI) */
 
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
+/*
+ * pci_target_init
  *
- ************************************************************************/
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
-	/*--------------------------------------------------------------------------+
+	/*
 	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440EPX PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	 */
+	/*
+	 * PowerPC440EPX PCI Master configuration.
+	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	 * PLB address 0xA0000000-0xDFFFFFFF
+	 *     ==> PCI address 0xA0000000-0xDFFFFFFF
+	 * Use byte reversed out routines to handle endianess.
+	 * Make this region non-prefetchable.
+	 */
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+						/* - disabled b4 setting */
 	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
+						/* and enable region */
 
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
+						/* - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
+						/* and enable region */
 
 	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM1LA, 0);		/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);		/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);		/* Local Addr. Reg */
 
-	/*--------------------------------------------------------------------------+
+	/*
 	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
+	 */
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
@@ -599,27 +575,24 @@ void pci_target_init(struct pci_controller *hose)
 
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
-	/*--------------------------------------------------------------------------+
-	 * Set up Configuration registers for on-board NEC uPD720101 USB controller
-	 *--------------------------------------------------------------------------*/
+	/*
+	 * Set up Configuration registers for on-board NEC uPD720101 USB
+	 * controller.
+	 */
 	pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
 }
 #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
 #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
 
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
+	/*
+	 * Write the PowerPC440 EP PCI Configuration regs.
+	 * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	 * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	 */
 	pci_read_config_word(0, PCI_COMMAND, &temp_short);
 	pci_write_config_word(0, PCI_COMMAND,
 			      temp_short | PCI_COMMAND_MASTER |
@@ -627,28 +600,26 @@ void pci_master_init(struct pci_controller *hose)
 }
 #endif
 
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
+/*
+ * is_pci_host
  *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
  *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
  *
- ************************************************************************/
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
 #if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
 	/* Korat is always configured as host. */
 	return (1);
 }
-#endif
+#endif /* defined(CONFIG_PCI) */
 
 #if defined(CONFIG_POST)
 /*
@@ -657,6 +628,6 @@ int is_pci_host(struct pci_controller *hose)
  */
 int post_hotkeys_pressed(void)
 {
-	return 0;		/* No hotkeys supported */
+	return 0;	/* No hotkeys supported */
 }
-#endif
+#endif /* CONFIG_POST */
diff --git a/board/netstal/common/fixed_sdram.c b/board/netstal/common/fixed_sdram.c
new file mode 100644
index 0000000000..8082f600ec
--- /dev/null
+++ b/board/netstal/common/fixed_sdram.c
@@ -0,0 +1,105 @@
+/*
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include  <ppc4xx.h>
+#include  <asm/processor.h>
+#include  "nm.h"
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+	u32 value;
+
+	printf("SDRAM Controller Registers --\n");
+	mfsdram(mem_mcopt1, value);
+	printf("    SDRAM0_CFG   : 0x%08x\n", value);
+	mfsdram(mem_status, value);
+	printf("    SDRAM0_STATUS: 0x%08x\n", value);
+	mfsdram(mem_mb0cf, value);
+	printf("    SDRAM0_B0CR  : 0x%08x\n", value);
+	mfsdram(mem_mb1cf, value);
+	printf("    SDRAM0_B1CR  : 0x%08x\n", value);
+	mfsdram(mem_sdtr1, value);
+	printf("    SDRAM0_TR    : 0x%08x\n", value);
+	mfsdram(mem_rtr, value);
+	printf("    SDRAM0_RTR   : 0x%08x\n", value);
+}
+#endif
+
+long int fixed_hcu4_sdram (unsigned int dram_size)
+{
+#ifdef DEBUG
+	printf(__FUNCTION__);
+#endif
+	/* disable memory controller */
+	mtsdram(mem_mcopt1, 0x00000000);
+
+	udelay (500);
+
+	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+	mtsdram(mem_besra, 0xffffffff);
+
+	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+	mtsdram(mem_besrb, 0xffffffff);
+
+	/* Clear SDRAM0_ECCCFG (disable ECC) */
+	mtsdram(mem_ecccf, 0x00000000);
+
+	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+	mtsdram(mem_eccerr, 0xffffffff);
+
+	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
+	 */
+	mtsdram(mem_sdtr1, 0x008a4015);
+
+	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+	 * and refresh timer
+	 */
+	switch (dram_size >> 20) {
+	case 32:
+		mtsdram(mem_mb0cf, 0x00062001);
+		mtsdram(mem_rtr,   0x07F00000);
+		break;
+	case 64:
+		mtsdram(mem_mb0cf, 0x00084001);
+		mtsdram(mem_rtr,   0x04100000);
+		break;
+	case 128:
+		mtsdram(mem_mb0cf, 0x000A4001);
+		mtsdram(mem_rtr,   0x04100000);
+		break;
+	default:
+		printf("Invalid memory size of %d MB given\n", dram_size >> 20);
+	}
+
+	/* Power management idle timer set to the default. */
+	mtsdram(mem_pmit, 0x07c00000);
+
+	udelay (500);
+
+	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+	mtsdram(mem_mcopt1, 0x90800000);
+
+#ifdef DEBUG
+	printf("%s: done\n", __FUNCTION__);
+#endif
+	return dram_size;
+}
diff --git a/board/netstal/common/nm.h b/board/netstal/common/nm.h
new file mode 100644
index 0000000000..2801e13268
--- /dev/null
+++ b/board/netstal/common/nm.h
@@ -0,0 +1,38 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+extern void hcu_led_set(u32 value);
+extern u32 get_serial_number(void);
+extern u32 hcu_get_slot(void);
+extern int board_with_pci(void);
+extern void nm_show_print(int generation, int index, int hw_capabilities);
+extern void set_params_for_sw_install(int install_requested, char *board_name );
+extern void common_misc_init_r(void);
+
+enum {
+	/* HW_GENERATION_HCU1 is no longer supported */
+	HW_GENERATION_HCU2  = 0x10,
+	HW_GENERATION_HCU3  = 0x10,
+	HW_GENERATION_HCU4  = 0x20,
+	HW_GENERATION_HCU5  = 0x30,
+	HW_GENERATION_MCU   = 0x08,
+	HW_GENERATION_MCU20 = 0x0a,
+	HW_GENERATION_MCU25 = 0x09,
+};
diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c
index a9de45ea70..b50b4af2af 100644
--- a/board/netstal/common/nm_bsp.c
+++ b/board/netstal/common/nm_bsp.c
@@ -1,5 +1,5 @@
 /*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
  *    Niklaus Giger (Niklaus.Giger@netstal.com)
  *
  *    This source code is free software; you can redistribute it
@@ -20,22 +20,118 @@
 
 #include <common.h>
 #include <command.h>
+#include <net.h>
+#include "nm.h"
 
-#ifdef CONFIG_CMD_BSP
-/*
- * Command nm_bsp: Netstal Maschinen BSP specific command
- */
-int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEFAULT_ETH_ADDR  "ethaddr"
+
+typedef struct {u8	id;	char *name;} generation_info;
+
+generation_info generations[7] = {
+	{HW_GENERATION_HCU2,	"HCU2"},
+	{HW_GENERATION_HCU3,	"HCU3"},
+	{HW_GENERATION_HCU4,	"HCU4"},
+	{HW_GENERATION_HCU5,	"HCU5"},
+	{HW_GENERATION_MCU,	"MCU"},
+	{HW_GENERATION_MCU20,	"MCU20"},
+	{HW_GENERATION_MCU25,	"MCU25"},
+};
+
+void nm_show_print(int generation, int index, int hw_capabilities)
+{
+	int j;
+	char *generationName=0;
+
+	/* reset ANSI terminal color mode */
+	printf("\x1B""[0m""Netstal Maschinen AG: ");
+	for (j=0; j < (sizeof(generations)/sizeof(generations[0])); j++) {
+		if (generations[j].id == generation) {
+			generationName = generations[j].name;
+			break;
+		}
+	}
+	printf("%s: index %d HW 0x%x\n", generationName, index, hw_capabilities);
+	for (j = 0;j < 6; j++) {
+		hcu_led_set(1 << j);
+		udelay(200 * 1000);
+	}
+}
+
+void set_params_for_sw_install(int install_requested, char *board_name )
 {
-	printf("%s: flag %d,  argc %d,  argv[0] %s\n",  __FUNCTION__,
-	       flag,  argc,  argv[0]);
-	printf("Netstal Maschinen BSP specific command. None at the moment.\n");
-	return 0;
+	if (install_requested) {
+		char string[128];
+
+		printf("\n\n%s SW-Installation: %d patching boot parameters\n",
+		       board_name, install_requested);
+		setenv("bootdelay", "0");
+		setenv("loadaddr", "0x01000000");
+		setenv("serverip", "172.25.1.1");
+		setenv("bootcmd", "run install");
+		sprintf(string, "tftp ${loadaddr} admin/sw_on_hd; "
+			"tftp ${loadaddr} installer/%s_sw_inst; "
+			"run boot_sw_inst", board_name);
+		setenv("install", string);
+		sprintf(string, "setenv bootargs emac(0,0)c:%s/%s_sw_inst "
+			"e=${ipaddr} h=${serverip} f=0x1000; "
+			"bootvx ${loadaddr}\0",
+			board_name, board_name);
+		setenv("boot_sw_inst", string);
+	}
+}
+
+void common_misc_init_r(void)
+{
+	char *s = getenv(DEFAULT_ETH_ADDR);
+	char *e;
+	int i;
+	u32 serial = get_serial_number();
+	IPaddr_t ipaddr;
+	char *ipstring;
+
+	for (i = 0; i < 6; ++i) {
+		gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+
+	if (gd->bd->bi_enetaddr[3] == 0 &&
+	    gd->bd->bi_enetaddr[4] == 0 &&
+	    gd->bd->bi_enetaddr[5] == 0) {
+		char ethaddr[22];
+
+		/* Must be in sync with CONFIG_ETHADDR */
+		gd->bd->bi_enetaddr[0] = 0x00;
+		gd->bd->bi_enetaddr[1] = 0x60;
+		gd->bd->bi_enetaddr[2] = 0x13;
+		gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
+		gd->bd->bi_enetaddr[4] = (serial >>  8) & 0xff;
+		gd->bd->bi_enetaddr[5] = hcu_get_slot();
+		sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+			gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
+			gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
+			gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+		printf("%s: Setting eth %s serial 0x%x\n",  __FUNCTION__,
+		       ethaddr, serial);
+		setenv(DEFAULT_ETH_ADDR, ethaddr);
+	}
+
+	/* IP-Adress update */
+	ipstring = getenv("ipaddr");
+	if (ipstring == 0)
+		ipaddr = string_to_ip("172.25.1.99");
+	else
+		ipaddr = string_to_ip(ipstring);
+	if ((ipaddr & 0xff) != (32 + hcu_get_slot())) {
+		char tmp[22];
+
+		ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot();
+		ip_to_string (ipaddr, tmp);
+		printf("%s: enforce %s\n",  __FUNCTION__, tmp);
+		setenv("ipaddr", tmp);
+		saveenv();
+	}
 }
 
-U_BOOT_CMD(
-	  nm_bsp, 1,      1,      nm_bsp,
-	  "nm_bsp  - Netstal Maschinen BSP specific command. \n",
-	  "Help for Netstal Maschinen BSP specific command.\n"
-	  );
-#endif
diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile
index af90821faa..b13d9d446f 100644
--- a/board/netstal/hcu4/Makefile
+++ b/board/netstal/hcu4/Makefile
@@ -22,14 +22,16 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
+vpath fixed_sdram.c ../common
 vpath hcu_flash.c ../common
+vpath nm_bsp.c ../common
 
 # NOBJS : Netstal common objects
-NOBJS	= hcu_flash.o
+NOBJS	= ../common/fixed_sdram.o ../common/hcu_flash.o ../common/nm_bsp.o
 COBJS	= $(BOARD).o
 SOBJS	=
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(NOBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 NOBJS	:= $(addprefix $(obj),$(NOBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk
index 376609ab0d..580f18cb2e 100644
--- a/board/netstal/hcu4/config.mk
+++ b/board/netstal/hcu4/config.mk
@@ -21,7 +21,7 @@
 # Netstal Maschinen AG: HCU4 boards
 #
 
-TEXT_BASE = 0xFFFa0000
+TEXT_BASE = 0xFFFB0000
 
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG -g
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index 48a3f13bad..4fbe7012b8 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -23,36 +23,21 @@
 #include  <asm/processor.h>
 #include  <asm/io.h>
 #include  <asm-ppc/u-boot.h>
-#include  "../common/nm_bsp.c"
+#include  "../common/nm.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
 #define HCU_MACH_VERSIONS_REGISTER	(0x7C000000 + 0xF00000)
+#define SYS_SLOT_ADDRESS		(0x7C000000 + 0x400000)
+#define HCU3_DIGITAL_IO_REGISTER	(0x7C000000 + 0x500000)
+#define HCU_SW_INSTALL_REQUESTED	0x10
 
-#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
-
-#define DO_UGLY_SDRAM_WORKAROUND
-
-enum {
-	/* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
-	HW_GENERATION_HCU2  = 0x10,
-	HW_GENERATION_HCU3  = 0x10,
-	HW_GENERATION_HCU4  = 0x20,
-	HW_GENERATION_MCU   = 0x08,
-	HW_GENERATION_MCU20 = 0x0a,
-	HW_GENERATION_MCU25 = 0x09,
-};
-
-void hcu_led_set(u32 value);
-long int spd_sdram(int(read_spd)(uint addr));
-
-#ifdef CONFIG_SPD_EEPROM
-#define DEBUG
-#endif
+#undef DEBUG
 
 #if defined(DEBUG)
 void show_sdram_registers(void);
 #endif
+long int fixed_hcu4_sdram (unsigned int dram_size);
 
 /*
  * This function is run very early, out of flash, and before devices are
@@ -69,6 +54,7 @@ void show_sdram_registers(void);
 /* Attention: If you want 1 microsecs times from the external oscillator
  * use  0x00804051. But this causes problems with u-boot and linux!
  */
+#define CPC0_CR0_VALUE	0x0030103c
 #define CPC0_CR1_VALUE	0x00004051
 #define CPC0_ECR	0xaa	/* Edge condition register */
 #define EBC0_CFG	0x23	/* External Peripheral Control Register */
@@ -77,18 +63,18 @@ void show_sdram_registers(void);
 
 int board_early_init_f (void)
 {
-	/*-------------------------------------------------------------------+
-	| Interrupt controller setup for the HCU4 board.
-	| Note: IRQ 0-15  405GP internally generated; high; level sensitive
-	|       IRQ 16    405GP internally generated; low; level sensitive
-	|       IRQ 17-24 RESERVED/UNUSED
-	|       IRQ 31 (EXT IRQ 6) (unused)
-	+-------------------------------------------------------------------*/
+	/*
+	 * Interrupt controller setup for the HCU4 board.
+	 * Note: IRQ 0-15  405GP internally generated; high; level sensitive
+	 *       IRQ 16    405GP internally generated; low; level sensitive
+	 *      IRQ 17-24 RESERVED/UNUSED
+	 *      IRQ 31 (EXT IRQ 6) (unused)
+	 */
 	mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
 	mtdcr (uicer, 0x00000000); /* disable all ints */
 	mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
-	mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
-	mtdcr (uictr, 0x10000000); /* set int trigger levels */
+	mtdcr (uicpr, 0xFFFFE000); /* set int polarities */
+	mtdcr (uictr, 0x00000000); /* set int trigger levels */
 	mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
 
 	mtdcr(CPC0_CR1,  CPC0_CR1_VALUE);
@@ -105,47 +91,44 @@ int board_pre_init (void)
 }
 #endif
 
+int sys_install_requested(void)
+{
+	u16 *ioValuePtr = (u16 *)HCU3_DIGITAL_IO_REGISTER;
+	return (in_be16(ioValuePtr) & HCU_SW_INSTALL_REQUESTED) != 0;
+}
+
 int checkboard (void)
 {
-	unsigned int j;
-	u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
-	u16 generation = *boardVersReg & 0xf0;
-	u16 index      = *boardVersReg & 0x0f;
+	u16 *boardVersReg = (u16 *)HCU_MACH_VERSIONS_REGISTER;
+	u16 generation = in_be16(boardVersReg) & 0xf0;
+	u16 index      = in_be16(boardVersReg) & 0x0f;
 
+	/* Cannot be done, in board_early_init */
+	mtdcr(CPC0_CR0,  CPC0_CR0_VALUE);
 	/* Force /RTS to active. The board it not wired quite
-	   correctly to use cts/rtc flow control, so just force the
-	   /RST active and forget about it. */
+	 *  correctly to use cts/rtc flow control, so just force the
+	 *  /RST active and forget about it.
+	 */
 	writeb (readb (0xef600404) | 0x03, 0xef600404);
-	printf ("\nNetstal Maschinen AG ");
-	if (generation == HW_GENERATION_HCU3)
-		printf ("HCU3: index %d\n\n", index);
-	else if (generation == HW_GENERATION_HCU4)
-		printf ("HCU4: index %d\n\n", index);
-	hcu_led_set(0);
-	for (j = 0; j < 7; j++) {
-		hcu_led_set(1 << j);
-		udelay(50 * 1000);
-	}
+	nm_show_print(generation, index, 0);
 
 	return 0;
 }
 
 u32 hcu_led_get(void)
 {
-	return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
+	return (~(in_be32((u32 *)GPIO0_OR)) >> 23) & 0xff;
 }
 
-/*---------------------------------------------------------------------------+
+/*
  * hcu_led_set  value to be placed into the LEDs (max 6 bit)
- *---------------------------------------------------------------------------*/
+ */
 void hcu_led_set(u32 value)
 {
 	u32   tmp = ~value;
-	u32   *ledReg;
 
 	tmp = (tmp << 23) | 0x7FFFFF;
-	ledReg = (u32 *)GPIO0_OR;
-	*ledReg = tmp;
+	out_be32((u32 *)GPIO0_OR, tmp);
 }
 
 /*
@@ -157,246 +140,72 @@ void sdram_init(void)
 	return;
 }
 
-#if defined(DEBUG)
-void show_sdram_registers(void)
-{
-	u32 value;
-
-	printf ("SDRAM Controller Registers --\n");
-	mfsdram(mem_mcopt1, value);
-	printf ("    SDRAM0_CFG   : 0x%08x\n", value);
-	mfsdram(mem_status, value);
-	printf ("    SDRAM0_STATUS: 0x%08x\n", value);
-	mfsdram(mem_mb0cf, value);
-	printf ("    SDRAM0_B0CR  : 0x%08x\n", value);
-	mfsdram(mem_mb1cf, value);
-	printf ("    SDRAM0_B1CR  : 0x%08x\n", value);
-	mfsdram(mem_sdtr1, value);
-	printf ("    SDRAM0_TR    : 0x%08x\n", value);
-	mfsdram(mem_rtr, value);
-	printf ("    SDRAM0_RTR   : 0x%08x\n", value);
-}
-#endif
-
 /*
- * this is even after checkboard. It returns the size of the SDRAM
- * that we have installed. This function is called by board_init_f
- * in lib_ppc/board.c to initialize the memory and return what I
- * found. These are default value, which will be overridden later.
+ * hcu_get_slot
  */
-
-long int fixed_hcu4_sdram (int board_type)
+u32 hcu_get_slot(void)
 {
-#ifdef DEBUG
-	printf (__FUNCTION__);
-#endif
-	/* disable memory controller */
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, 0x00000000);
-
-	udelay (500);
-
-	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
-	mtdcr (memcfga, mem_besra);
-	mtdcr (memcfgd, 0xffffffff);
-
-	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
-	mtdcr (memcfga, mem_besrb);
-	mtdcr (memcfgd, 0xffffffff);
-
-	/* Clear SDRAM0_ECCCFG (disable ECC) */
-	mtdcr (memcfga, mem_ecccf);
-	mtdcr (memcfgd, 0x00000000);
-
-	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
-	mtdcr (memcfga, mem_eccerr);
-	mtdcr (memcfgd, 0xffffffff);
-
-	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
-	 * TODO ngngng
-	 */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, 0x008a4015);
-
-	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
-	 * TODO ngngng
-	 */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, 0x00062001);
-
-	/* refresh timer = 0x400  */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, 0x04000000);
-
-	/* Power management idle timer set to the default. */
-	mtdcr (memcfga, mem_pmit);
-	mtdcr (memcfgd, 0x07c00000);
-
-	udelay (500);
-
-	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, 0x90800000);
-
-#ifdef DEBUG
-	printf ("%s: done\n", __FUNCTION__);
-#endif
-	return SDRAM_LEN;
+	u16 *slot = (u16 *)SYS_SLOT_ADDRESS;
+	return in_be16(slot) & 0x7f;
 }
 
-/*---------------------------------------------------------------------------+
- * hcu_serial_number
- *---------------------------------------------------------------------------*/
-static u32 hcu_serial_number(void)
+/*
+ * get_serial_number
+ */
+u32 get_serial_number(void)
 {
 	u32 *serial = (u32 *)CFG_FLASH_BASE;
 
-	if (*serial == 0xffffffff)
-		return get_ticks();
+	if (in_be32(serial) == 0xffffffff)
+		return 0;
 
-	return *serial;
+	return in_be32(serial);
 }
 
 
-/*---------------------------------------------------------------------------+
+/*
  * misc_init_r.
- *---------------------------------------------------------------------------*/
+ */
 
 int misc_init_r(void)
 {
-	char *s = getenv("ethaddr");
-	char *e;
-	int i;
-	u32 serial = hcu_serial_number();
-
-	for (i = 0; i < 6; ++i) {
-		gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
-		if (s)
-			s = (*e) ? e + 1 : e;
-	}
-
-	if (gd->bd->bi_enetaddr[3] == 0 &&
-	    gd->bd->bi_enetaddr[4] == 0 &&
-	    gd->bd->bi_enetaddr[5] == 0) {
-		char ethaddr[22];
-		/* [0..3] Must be in sync with CONFIG_ETHADDR */
-		gd->bd->bi_enetaddr[0] = 0x00;
-		gd->bd->bi_enetaddr[1] = 0x60;
-		gd->bd->bi_enetaddr[2] = 0x13;
-		gd->bd->bi_enetaddr[3] = (serial          >> 16) & 0xff;
-		gd->bd->bi_enetaddr[4] = (serial          >>  8) & 0xff;
-		gd->bd->bi_enetaddr[5] = (serial          >>  0) & 0xff;
-		sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
-			 gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
-			 gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
-			 gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
-		printf("%s: Setting eth %s serial 0x%x\n",  __FUNCTION__,
-		       ethaddr, serial);
-		setenv ("ethaddr", ethaddr);
-	}
+	common_misc_init_r();
+	set_params_for_sw_install( sys_install_requested(), "hcu4" );
 	return 0;
 }
 
-#ifdef  DO_UGLY_SDRAM_WORKAROUND
-#include "i2c.h"
-
-void set_spd_default_value(unsigned int spd_addr,uchar def_val)
-{
-	uchar value;
-	int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ;
-
-	if (res == 0 && value == 0xff) {
-		res = i2c_write(SPD_EEPROM_ADDRESS,
-				spd_addr, 1, &def_val, 1) ;
-#ifdef DEBUG
-		printf("%s: Setting spd offset %3d to %3d res %d\n",
-		       __FUNCTION__, spd_addr,  def_val, res);
-#endif
-	}
-}
-#endif
-
 long int initdram(int board_type)
 {
 	long dram_size = 0;
-
-#if !defined(CONFIG_SPD_EEPROM)
-	dram_size = fixed_hcu4_sdram();
-#else
-#ifdef  DO_UGLY_SDRAM_WORKAROUND
-	/* Workaround if you have no working I2C-EEPROM-SPD-configuration */
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	set_spd_default_value(2,  4); /* SDRAM Type */
-	set_spd_default_value(7,  0); /* module width, high byte */
-	set_spd_default_value(12, 1); /* Refresh or 0x81 */
-
-	/* Only correct for HCU3 with 32 MB RAM*/
-	/* Number of bytes used by module manufacturer */
-	set_spd_default_value( 0, 128);
-	set_spd_default_value( 1, 11 ); /* Total SPD memory size */
-	set_spd_default_value( 2, 4  ); /* Memory type */
-	set_spd_default_value( 3, 12 ); /* Number of row address bits */
-	set_spd_default_value( 4, 9  ); /* Number of column address bits */
-	set_spd_default_value( 5, 1  ); /* Number of module rows */
-	set_spd_default_value( 6, 32 ); /* Module data width, LSB */
-	set_spd_default_value( 7, 0  ); /* Module data width, MSB */
-	set_spd_default_value( 8, 1  ); /* Module interface signal levels */
-	/* SDRAM cycle time for highest CL (Tclk) */
-	set_spd_default_value( 9, 112);
-	/* SDRAM access time from clock for highest CL (Tac) */
-	set_spd_default_value(10, 84 );
-	set_spd_default_value(11, 2  ); /* Module configuration type */
-	set_spd_default_value(12, 128); /* Refresh rate/type */
-	set_spd_default_value(13, 16 ); /* Primary SDRAM width */
-	set_spd_default_value(14, 8  ); /* Error Checking SDRAM width */
-	/* SDRAM device attributes, min clock delay for back to back */
-	/*random column addresses (Tccd) */
-	set_spd_default_value(15, 1  );
-	/* SDRAM device attributes, burst lengths supported */
-	set_spd_default_value(16, 143);
-	/* SDRAM device attributes, number of banks on SDRAM device */
-	set_spd_default_value(17, 4  );
-	/* SDRAM device attributes, CAS latency */
-	set_spd_default_value(18, 6  );
-	/* SDRAM device attributes, CS latency */
-	set_spd_default_value(19, 1  );
-	/* SDRAM device attributes, WE latency */
-	set_spd_default_value(20, 1  );
-	set_spd_default_value(21, 0  ); /* SDRAM module attributes */
-	/* SDRAM device attributes, general */
-	set_spd_default_value(22, 14 );
-	/* SDRAM cycle time for 2nd highest CL (Tclk) */
-	set_spd_default_value(23, 117);
-	/* SDRAM access time from clock for2nd highest CL (Tac) */
-	set_spd_default_value(24, 84 );
-	/* SDRAM cycle time for 3rd highest CL (Tclk) */
-	set_spd_default_value(25, 0  );
-	/* SDRAM access time from clock for3rd highest CL (Tac) */
-	set_spd_default_value(26, 0  );
-	set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */
-	/* Minimum row active to row active delay (Trrd) */
-	set_spd_default_value(28, 14 );
-	set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */
-	set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */
-	set_spd_default_value(31, 8  ); /* Module bank density */
-	/* Command and Address signal input setup time */
-	set_spd_default_value(32, 21 );
-	/* Command and Address signal input hold time */
-	set_spd_default_value(33, 8  );
-	set_spd_default_value(34, 21 ); /* Data signal input setup time */
-	set_spd_default_value(35, 8  ); /* Data signal input hold time */
-#endif  /* DO_UGLY_SDRAM_WORKAROUND */
-	dram_size = spd_sdram(0);
-#endif
+	u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
+	u16 generation = in_be16(boardVersReg) & 0xf0;
+	if (generation == HW_GENERATION_HCU3)
+		dram_size = 32*1024*1024;
+	else dram_size = 64*1024*1024;
+	fixed_hcu4_sdram(dram_size);
 
 #ifdef DEBUG
 	show_sdram_registers();
 #endif
 
-#if defined(CFG_DRAM_TEST)
-	bcu4_testdram(dram_size);
-	printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024));
-#endif
-
 	return dram_size;
 }
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile
index 27398b905b..9f248a441d 100644
--- a/board/netstal/hcu5/Makefile
+++ b/board/netstal/hcu5/Makefile
@@ -23,13 +23,14 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 vpath hcu_flash.c ../common
+vpath nm_bsp.c ../common
 
 # NOBJS : Netstal common objects
-NOBJS	= hcu_flash.o
+NOBJS	= ../common/hcu_flash.o ../common/nm_bsp.o
 COBJS	= $(BOARD).o sdram.o
 SOBJS	= init.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(NOBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 NOBJS	:= $(addprefix $(obj),$(NOBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt
index 3118da9e06..c205108ff1 100644
--- a/board/netstal/hcu5/README.txt
+++ b/board/netstal/hcu5/README.txt
@@ -10,9 +10,6 @@ TODO:
 - Fix RTS/CTS problem (HW?)
   CONFIG_SERIAL_MULTI/CONFIG_SERIAL_SOFTWARE_FIFO hangs after
   Switching to interrupt driven serial input mode
-- Make vxWorks start from u-boot. Possible reasons
-    - Does vxWorks need an entry for the Machine Check interrupt like this
-      tlbentry( 0x40000000, SZ_256M, 0, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) ?
 
 Caveats:
 --------
diff --git a/board/netstal/hcu5/config.mk b/board/netstal/hcu5/config.mk
index cfd574412c..51ddb76cd8 100644
--- a/board/netstal/hcu5/config.mk
+++ b/board/netstal/hcu5/config.mk
@@ -21,7 +21,7 @@
 # Netstal Maschinen AG: HCU5 boards
 #
 
-TEXT_BASE = 0xFFFa0000
+TEXT_BASE = 0xFFFB0000
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index b9b10fdc29..2c7afe277e 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -1,5 +1,5 @@
 /*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
  *    Niklaus Giger (Niklaus.Giger@netstal.com)
  *
  *    This source code is free software; you can redistribute it
@@ -21,13 +21,11 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <ppc440.h>
-#include <asm/mmu.h>
-#include <net.h>
+#include <asm/io.h>
+#include  "../common/nm.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void hcu_led_set(u32 value);
-
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
 #undef BOOTSTRAP_OPTION_A_ACTIVE
@@ -42,23 +40,10 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define SDR0_ECID2		0x0082
 #define SDR0_ECID3		0x0083
 
-#define SYS_IO_ADDRESS		(CFG_CS_2 + 0x00e00000)
+#define SYS_IO_ADDRESS			(CFG_CS_2 + 0x00e00000)
 #define SYS_SLOT_ADDRESS		(CFG_CPLD + 0x00400000)
-
-#define DEFAULT_ETH_ADDR  "ethaddr"
-/* ethaddr for first or etha1ddr for second ethernet */
-
-enum {
-	/* HW_GENERATION_HCU1 is no longer supported */
-	HW_GENERATION_HCU2  = 0x10,
-	HW_GENERATION_HCU3  = 0x10,
-	HW_GENERATION_HCU4  = 0x20,
-	HW_GENERATION_HCU5  = 0x30,
-	HW_GENERATION_MCU   = 0x08,
-	HW_GENERATION_MCU20 = 0x0a,
-	HW_GENERATION_MCU25 = 0x09,
-};
-
+#define HCU_DIGITAL_IO_REGISTER	(CFG_CPLD + 0x0500000)
+#define HCU_SW_INSTALL_REQUESTED	0x10
 
 /*
  * This function is run very early, out of flash, and before devices are
@@ -72,7 +57,6 @@ enum {
 
 int board_early_init_f(void)
 {
-	u32 reg;
 
 #ifdef BOOTSTRAP_OPTION_A_ACTIVE
 	/* Booting with Bootstrap Option A
@@ -113,10 +97,9 @@ int board_early_init_f(void)
 	mtdcr(ebccfga, xbcfg);
 	mtdcr(ebccfgd, 0xb8400000);
 
-	/*--------------------------------------------------------------------
+	/*
 	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/* test-only: take GPIO init from pcs440ep ???? in config file */
+	 */
 	out32(GPIO0_OR, 0x00000000);
 	out32(GPIO0_TCR, 0x7C2FF1CF);
 	out32(GPIO0_OSRL, 0x40055000);
@@ -143,9 +126,9 @@ int board_early_init_f(void)
 	out32(GPIO1_ISR3L, 0x00000000);
 	out32(GPIO1_ISR3H, 0x00000000);
 
-	/*--------------------------------------------------------------------
+	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
+	 */
 	mtdcr(uic0sr, 0xffffffff);	/* clear all */
 	mtdcr(uic0er, 0x00000000);	/* disable all */
 	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
@@ -172,12 +155,6 @@ int board_early_init_f(void)
 	mtsdr(sdr_pfc0, 0x00003E00);	/* Pin function:  */
 	mtsdr(sdr_pfc1, 0x00848000);	/* Pin function: UART0 has 4 pins */
 
-	/* PCI arbiter enabled */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);
-
-	pci_pre_init(0);
-
 	/* setup BOOT FLASH */
 	mtsdr(SDR0_CUST0, 0xC0082350);
 
@@ -192,33 +169,27 @@ int board_pre_init(void)
 
 #endif
 
+int sys_install_requested(void)
+{
+	u16 *ioValuePtr = (u16 *)HCU_DIGITAL_IO_REGISTER;
+	return (in_be16(ioValuePtr) & HCU_SW_INSTALL_REQUESTED) != 0;
+}
+
 int checkboard(void)
 {
-	unsigned int j;
 	u16 *hwVersReg    = (u16 *) HCU_HW_VERSION_REGISTER;
 	u16 *boardVersReg = (u16 *) HCU_CPLD_VERSION_REGISTER;
-	u16 generation = *boardVersReg & 0xf0;
-	u16 index      = *boardVersReg & 0x0f;
+	u16 generation = in_be16(boardVersReg) & 0xf0;
+	u16 index      = in_be16(boardVersReg) & 0x0f;
 	u32 ecid0, ecid1, ecid2, ecid3;
 
-	printf("Netstal Maschinen AG: ");
-	if (generation == HW_GENERATION_HCU3)
-		printf("HCU3: index %d", index);
-	else if (generation == HW_GENERATION_HCU4)
-		printf("HCU4: index %d", index);
-	else if (generation == HW_GENERATION_HCU5)
-		printf("HCU5: index %d", index);
-	printf(" HW 0x%02x\n", *hwVersReg & 0xff);
+	nm_show_print(generation, index, in_be16(hwVersReg) & 0xff);
 	mfsdr(SDR0_ECID0, ecid0);
 	mfsdr(SDR0_ECID1, ecid1);
 	mfsdr(SDR0_ECID2, ecid2);
 	mfsdr(SDR0_ECID3, ecid3);
 
 	printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3);
-	for (j = 0;j < 6; j++) {
-		hcu_led_set(1 << j);
-		udelay(200 * 1000);
-	}
 
 	return 0;
 }
@@ -228,97 +199,47 @@ u32 hcu_led_get(void)
 	return in16(SYS_IO_ADDRESS) & 0x3f;
 }
 
-/*---------------------------------------------------------------------------+
+/*
  * hcu_led_set  value to be placed into the LEDs (max 6 bit)
- *---------------------------------------------------------------------------*/
+ */
 void hcu_led_set(u32 value)
 {
 	out16(SYS_IO_ADDRESS, value);
 }
 
-/*---------------------------------------------------------------------------+
+/*
  * get_serial_number
- *---------------------------------------------------------------------------*/
-static u32 get_serial_number(void)
+ */
+u32 get_serial_number(void)
 {
 	u32 *serial = (u32 *)CFG_FLASH_BASE;
 
-	if (*serial == 0xffffffff)
+	if (in_be32(serial) == 0xffffffff)
 		return 0;
 
-	return *serial;
+	return in_be32(serial);
 }
 
 
-/*---------------------------------------------------------------------------+
+/*
  * hcu_get_slot
- *---------------------------------------------------------------------------*/
+ */
 u32 hcu_get_slot(void)
 {
 	u16 *slot = (u16 *)SYS_SLOT_ADDRESS;
-	return (*slot) & 0x7f;
+	return in_be16(slot) & 0x7f;
 }
 
 
-/*---------------------------------------------------------------------------+
+/*
  * misc_init_r.
- *---------------------------------------------------------------------------*/
+ */
 int misc_init_r(void)
 {
-	char *s = getenv(DEFAULT_ETH_ADDR);
-	char *e;
-	int i;
-	u32 serial = get_serial_number();
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
 
-	for (i = 0; i < 6; ++i) {
-		gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
-		if (s)
-			s = (*e) ? e + 1 : e;
-	}
-
-	if (gd->bd->bi_enetaddr[3] == 0 &&
-	    gd->bd->bi_enetaddr[4] == 0 &&
-	    gd->bd->bi_enetaddr[5] == 0) {
-		char ethaddr[22];
-
-		/* Must be in sync with CONFIG_ETHADDR */
-		gd->bd->bi_enetaddr[0] = 0x00;
-		gd->bd->bi_enetaddr[1] = 0x60;
-		gd->bd->bi_enetaddr[2] = 0x13;
-		gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
-		gd->bd->bi_enetaddr[4] = (serial >>  8) & 0xff;
-		gd->bd->bi_enetaddr[5] = hcu_get_slot();
-		sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
-			gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
-			gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
-			gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
-		printf("%s: Setting eth %s serial 0x%x\n",  __FUNCTION__,
-		       ethaddr, serial);
-		setenv(DEFAULT_ETH_ADDR, ethaddr);
-	}
-
-	/* IP-Adress update */
-	{
-		IPaddr_t ipaddr;
-		char *ipstring;
-
-		ipstring = getenv("ipaddr");
-		if (ipstring == 0)
-			ipaddr = string_to_ip("172.25.1.99");
-		else
-			ipaddr = string_to_ip(ipstring);
-		if ((ipaddr & 0xff) != (32 + hcu_get_slot())) {
-			char tmp[22];
-
-			ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot();
-			ip_to_string (ipaddr, tmp);
-			printf("%s: enforce %s\n",  __FUNCTION__, tmp);
-			setenv("ipaddr", tmp);
-		}
-	}
 #ifdef CFG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
@@ -326,12 +247,14 @@ int misc_init_r(void)
 			    0xffffffff,
 			    &flash_info[0]);
 
+#ifdef CFG_ENV_ADDR_REDUND
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
 			    CFG_ENV_ADDR_REDUND,
 			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
 			    &flash_info[0]);
 #endif
+#endif
 
 	/*
 	 * USB stuff...
@@ -355,7 +278,8 @@ int misc_init_r(void)
 	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
 
 	/* An 8-bit/60MHz interface is the only possible alternative
-	   when connecting the Device to the PHY */
+	 *  when connecting the Device to the PHY
+	 */
 	usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
 	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
 
@@ -376,14 +300,37 @@ int misc_init_r(void)
 	mtsdr(SDR0_SRST1, 0x00000000);
 	udelay(1000);
 	mtsdr(SDR0_SRST0, 0x00000000);
-
 	printf("USB:   Host(int phy) Device(ext phy)\n");
 
+	common_misc_init_r();
+	set_params_for_sw_install( sys_install_requested(), "hcu5" );
+	/* We cannot easily enable trace before, as there are other
+	 * routines messing around with sdr0_pfc1. And I do not need it.
+	 */
+	if (mfspr(dbcr0) & 0x80000000) {
+		/* External debugger alive
+		 * enable trace facilty for Lauterback
+		 * CCR0[DAPUIB]=0 	Enable broadcast of instruction data
+		 *			to auxiliary processor interface
+		 * CCR0[DTB]=0 		Enable broadcast of trace information
+		 * SDR0_PFC0[TRE] 	Trace signals are enabled instead of
+		 *			GPIO49-63
+		 */
+		mtspr(ccr0, mfspr(ccr0)  &~ 0x00108000);
+		mtsdr(SDR0_PFC0, sdr0_pfc1 | 0x00000100);
+	}
 	return 0;
 }
+#ifdef CONFIG_PCI
+int board_with_pci(void)
+{
+	u32 reg;
 
-#if defined(CONFIG_PCI)
-/*************************************************************************
+	mfsdr(sdr_pci0, reg);
+	return (reg & SDR0_XCR_PAE_MASK);
+}
+
+/*
  *  pci_pre_init
  *
  *  This routine is called just prior to registering the hose and gives
@@ -394,81 +341,64 @@ int misc_init_r(void)
  *	(add regions, override default access routines, etc) or perform
  *	certain pre-initialization actions.
  *
- ************************************************************************/
+ */
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
 
-	/*-------------------------------------------------------------------+
-	 * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM.
-	 * Workaround: Disable write pipelining to DDR SDRAM by setting
-	 * PLB0_ACR[WRP] = 0.
-	 *-------------------------------------------------------------------*/
+	if (!board_with_pci()) { return 0; }
 
-	/*-------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------*/
+	/*
+	 * Set priority for all PLB3 devices to 0.
+	 * Set PLB3 arbiter to fair mode.
+	 */
 	mfsdr(sdr_amp1, addr);
 	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb3_acr);
-	/* mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); */  /* ngngng */
 	mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */
 
-	/*-------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------*/
+	/*
+	 * Set priority for all PLB4 devices to 0.
+	 */
 	mfsdr(sdr_amp0, addr);
 	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	/* mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); */  /* ngngng */
 	mtdcr(plb4_acr, addr);  /* Sequoia */
 
-	/*-------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------*/
-	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	/* addr = (addr & ~plb0_acr_wrp_mask); */  /* ngngng */
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; /* Sequoia */
-
-	/* mtdcr(plb0_acr, addr); */ /* Sequoia */
+	/*
+	 * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM.
+	 * Workaround: Disable write pipelining to DDR SDRAM by setting
+	 * PLB0_ACR[WRP] = 0.
+	 */
 	mtdcr(plb0_acr, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) ;
-	/* mtdcr(plb1_acr, addr); */ /* Sequoia */
 	mtdcr(plb1_acr, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
 
-	return 1;
+	return board_with_pci();
 }
 
-/*************************************************************************
+/*
  *  pci_target_init
  *
  *	The bootstrap configuration provides default settings for the pci
  *	inbound map (PIM). But the bootstrap config choices are limited and
  *	may not be sufficient for a given board.
  *
- ************************************************************************/
+ */
 void pci_target_init(struct pci_controller *hose)
 {
-	/*-------------------------------------------------------------+
+	if (!board_with_pci()) { return; }
+	/*
 	 * Set up Direct MMIO registers
-	 *-------------------------------------------------------------*/
-	/*-------------------------------------------------------------+
-	  | PowerPC440EPX PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address
-	  |		  0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +-------------------------------------------------------------*/
+	 *
+	 * PowerPC440EPX PCI Master configuration.
+	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	 *   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address
+	 *		  0xA0000000-0xDFFFFFFF
+	 *   Use byte reversed out routines to handle endianess.
+	 * Make this region non-prefetchable.
+	 */
 	/* PMM0 Mask/Attribute - disabled b4 setting */
 	out32r(PCIX0_PMM0MA, 0x00000000);
 	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
@@ -492,9 +422,9 @@ void pci_target_init(struct pci_controller *hose)
 	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
 	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
 
-	/*------------------------------------------------------------------+
+	/*
 	 * Set up Configuration registers
-	 *------------------------------------------------------------------*/
+	 */
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
@@ -513,26 +443,27 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 }
 
-/*************************************************************************
+/*
  *  pci_master_init
  *
- ************************************************************************/
+ */
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
+	if (!board_with_pci()) { return; }
 
-	/*---------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------*/
+	/*---------------------------------------------------------------
+	 * Write the PowerPC440 EP PCI Configuration regs.
+	 *   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	 *   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	 *--------------------------------------------------------------*/
 	pci_read_config_word(0, PCI_COMMAND, &temp_short);
 	pci_write_config_word(0, PCI_COMMAND,
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
 
-/*************************************************************************
+/*
  *  is_pci_host
  *
  *	This routine is called to determine if a pci scan should be
@@ -545,10 +476,28 @@ void pci_master_init(struct pci_controller *hose)
  *
  *	Return 0 for adapter mode, non-zero for host (monarch) mode.
  *
- *
- ************************************************************************/
+ */
 int is_pci_host(struct pci_controller *hose)
 {
 	return 1;
 }
 #endif	 /* defined(CONFIG_PCI) */
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
index 5ab6cd24d7..188272e780 100644
--- a/board/netstal/hcu5/init.S
+++ b/board/netstal/hcu5/init.S
@@ -39,41 +39,68 @@
 tlbtab:
 	tlbtab_start
 
-	/* vxWorks needs this entry for the Machine Check interrupt,  */
-	/* tlbentry( 0x40000000, SZ_256M, 0, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */
+	/* TLB#0: vxWorks needs this entry for the Machine Check interrupt, */
+	tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	/* TLB#1: TLB-entry for DDR SDRAM (Up to 2GB) */
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0,
+		AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB#2: TLB-entry for EBC */
+	tlbentry( 0x80000000, SZ_256M, 0x80000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	/*
-	 * BOOT_CS (FLASH) must be second. Before relocation SA_I can be off to use the
-	 * speed up boot process. It is patched after relocation to enable SA_I
+	 * TLB#3: BOOT_CS (FLASH) must be forth. Before relocation SA_I can be
+	 * off to use the speed up boot process. It is patched after relocation
+	 * to enable SA_I
 	 */
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1,
+		AC_R|AC_W|AC_X|SA_G)
 
-	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR(2) detection
+	 * routine.
+	 */
 
-	/* TLB-entry for EBC (CFG_CPLD) */
-	/* tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */
-	/* 		CAN */
-	tlbentry( CFG_CS_1, SZ_16M, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	 /* 		IMC + CPLD */
-	tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	 /* 		IMC-Fast */
-	tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3 + 0x1000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	/* TLB#4: */
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1,
+		AC_R|AC_W|SA_G|SA_I )
+	/* TLB#5: */
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1,
+		AC_R|AC_W|SA_G|SA_I )
+	/* TLB#6: */
+	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1,
+		AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
-	tlbentry( CFG_PCI_BASE, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
+	/* TLB#7: */
+	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,
+		AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/*TLB-entry PCI registers*/
+	/* TLB#8: */
 	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for peripherals */
+	/* TLB#9: */
 	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
 
-	/* TLB for SDRAM will be added by initdram (sdram.c) */
+	/* 		CAN */
+	/* TLB#10: */
+	tlbentry( CFG_CS_1, SZ_1K, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB#11:  CPLD and IMC-Standard 32 MB */
+	tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB#12: */
+	tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1,
+		AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	 /* 		IMC-Fast 32 MB */
+	/* TLB#13: */
+	tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	/* TLB#14: */
+	tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3, 1,
+		AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	tlbtab_end
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index cbb2839cc0..5435de1249 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -62,11 +62,13 @@ void dflush(void);
 #define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC correcting on */
 #define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
 
-#ifdef CFG_ENABLE_SDRAM_CACHE
-#define MY_TLB_WORD2_I_ENABLE	0		/* enable caching on DDR2 */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on DDR2 */
-#endif
+#define ECC_RAM				0x03267F0B
+#define NO_ECC_RAM			0x00267F0B
+
+#define HCU_HW_SDRAM_CONFIG_MASK	0x7
+
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
+	/* disable caching on DDR2 */
 
 void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 
@@ -74,6 +76,7 @@ void board_add_ram_info(int use_default)
 {
 	PPC4xx_SYS_INFO board_cfg;
 	u32 val;
+
 	mfsdram(DDR0_22, val);
 	val &= DDR0_22_CTRL_RAW_MASK;
 	switch (val) {
@@ -157,38 +160,35 @@ static void blank_string(int size)
 /*---------------------------------------------------------------------------+
  * program_ecc.
  *---------------------------------------------------------------------------*/
-static void program_ecc(unsigned long start_address, unsigned long num_bytes,
-			unsigned long tlb_word2_i_value)
+static void program_ecc(unsigned long start_address, unsigned long num_bytes)
 {
-	unsigned long current_address= start_address;
-	int loopi = 0;
 	u32 val;
-
 	char str[] = "ECC generation -";
-	char slash[] = "\\|/-\\|/-";
+#if defined(CONFIG_PRAM)
+	u32 *magic;
+
+	/* Check whether vxWorks is using EDR logging, if yes zero */
+	/* also PostMortem and user reserved memory */
+	magic = (u32 *)in_be32((u32 *)(start_address + num_bytes -
+				       (CONFIG_PRAM*1024) + sizeof(u32)));
+
+	debug("\n%s:  CONFIG_PRAM %d kB magic 0x%x 0x%p -> 0x%x\n", __FUNCTION__,
+	       CONFIG_PRAM,
+	       start_address + num_bytes - (CONFIG_PRAM*1024) + sizeof(u32),
+	       magic, in_be32(magic));
+	if (in_be32(magic) == 0xbeefbabe)
+		num_bytes -= (CONFIG_PRAM*1024) - PM_RESERVED_MEM;
+#endif
 
 	sync();
 	eieio();
 
 	puts(str);
 
-	if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
-		/* ECC bit set method for non-cached memory */
-		/* This takes various seconds */
-		for(current_address = 0; current_address < num_bytes;
-		     current_address += sizeof(u32)) {
-			*(u32 *)current_address = 0;
-			if ((current_address % (2 << 20)) == 0) {
-				putc('\b');
-				putc(slash[loopi++ % 8]);
-			}
-		}
-	} else {
-		/* ECC bit set method for cached memory */
-		/* Fast method, no noticeable delay */
-		dcbz_area(start_address, num_bytes);
-		dflush();
-	}
+	/* ECC bit set method for cached memory */
+	/* Fast method, no noticeable delay */
+	dcbz_area(start_address, num_bytes);
+	dflush();
 	blank_string(strlen(str));
 
 	/* Clear error status */
@@ -196,7 +196,7 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes,
 	mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
 
 	/*
-	 * Clear possible errors
+	 * Clear possible ECC errors
 	 * If not done, then we could get an interrupt later on when
 	 * exceptions are enabled.
 	 */
@@ -209,9 +209,9 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes,
 
 	return;
 }
-
 #endif
 
+
 /***********************************************************************
  *
  * initdram -- 440EPx's DDR controller is a DENALI Core
@@ -219,9 +219,6 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes,
  ************************************************************************/
 long int initdram (int board_type)
 {
-#define	HCU_HW_SDRAM_CONFIG_MASK 0x7
-#define INVALID_HW_CONFIG   "Invalid HW-Config"
-	u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER;
 	unsigned int dram_size = 0;
 
 	mtsdram(DDR0_02, 0x00000000);
@@ -232,24 +229,23 @@ long int initdram (int board_type)
 	mtsdram(DDR0_03, 0x02030602);
 	mtsdram(DDR0_04, 0x0A020200);
 	mtsdram(DDR0_05, 0x02020307);
-	switch (*hwVersReg & HCU_HW_SDRAM_CONFIG_MASK) {
-	case 0:
-		dram_size = 128 * 1024 * 1024 ;
-		mtsdram(DDR0_06, 0x0102C80D);  /* 128MB RAM */
-		mtsdram(DDR0_11, 0x000FC800);  /* 128MB RAM */
-		mtsdram(DDR0_43, 0x030A0300);  /* 128MB RAM */
-		break;
+	switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) {
 	case 1:
 		dram_size = 256 * 1024 * 1024 ;
 		mtsdram(DDR0_06, 0x0102C812);  /* 256MB RAM */
 		mtsdram(DDR0_11, 0x0014C800);  /* 256MB RAM */
 		mtsdram(DDR0_43, 0x030A0200);  /* 256MB RAM */
 		break;
+	case 0:
 	default:
-		sdram_panic(INVALID_HW_CONFIG);
+		dram_size = 128 * 1024 * 1024 ;
+		mtsdram(DDR0_06, 0x0102C80D);  /* 128MB RAM */
+		mtsdram(DDR0_11, 0x000FC800);  /* 128MB RAM */
+		mtsdram(DDR0_43, 0x030A0300);  /* 128MB RAM */
 		break;
 	}
 	mtsdram(DDR0_07, 0x00090100);
+
 	/*
 	 * TCPD=200 cycles of clock input is required to lock the DLL.
 	 * CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
@@ -264,8 +260,6 @@ long int initdram (int board_type)
 	mtsdram(DDR0_19, 0x1D1D1D1D);
 	mtsdram(DDR0_20, 0x0B0B0B0B);
 	mtsdram(DDR0_21, 0x0B0B0B0B);
-	#define ECC_RAM  0x03267F0B
-	#define NO_ECC_RAM  0x00267F0B
 #ifdef CONFIG_DDR_ECC
 	mtsdram(DDR0_22, ECC_RAM);
 #else
@@ -288,7 +282,7 @@ long int initdram (int board_type)
 	 * Program tlb entries for this size (dynamic)
 	 */
 	remove_tlb(CFG_SDRAM_BASE, 256 << 20);
-	program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+	program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
 
 	/*
 	 * Setup 2nd TLB with same physical address but different virtual
@@ -296,13 +290,11 @@ long int initdram (int board_type)
 	 */
 	program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
 
-	/* Diminish RAM to initialize */
-	dram_size = dram_size - 32 ;
 #ifdef CONFIG_DDR_ECC
 	/*
 	 * If ECC is enabled, initialize the parity bits.
 	 */
-	program_ecc(CFG_DDR_CACHED_ADDR, dram_size, 0);
+	program_ecc(CFG_DDR_CACHED_ADDR, dram_size);
 #endif
 
 	return (dram_size);
diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds
index c517f7b556..2c48316c53 100644
--- a/board/netstal/hcu5/u-boot.lds
+++ b/board/netstal/hcu5/u-boot.lds
@@ -137,7 +137,7 @@ SECTIONS
    *(COMMON)
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);