diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2012-05-07 10:26:00 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-05-15 08:31:34 +0200 |
| commit | 768a05971030c0c57e05063f20449b8d4138293e (patch) | |
| tree | f672a9676d67434bc52e26f78e9bc181b020219d /board | |
| parent | 5b547f3c20cc0d394f0bbab817e2a50d1a18235f (diff) | |
| download | blackbird-obmc-uboot-768a05971030c0c57e05063f20449b8d4138293e.tar.gz blackbird-obmc-uboot-768a05971030c0c57e05063f20449b8d4138293e.zip | |
mx53loco: Turn on VUSB regulator
On the mx53loco board with mc34708 PMIC it is necessary to turn on VUSB regulator
so that the mx53 USBH1 PHY receives the 3.3V voltage.
Tested by inserting a USB pen drive in the upper USB slot (USBH1) and then issued the
commands:
usb start
usb info
,which correctly detected and printed the USB pen drive information.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/mx53loco/mx53loco.c | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 8f5ded988d..a49b00a812 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -359,6 +359,15 @@ static int power_init(void) pmic_reg_read(p, REG_POWER_CTL2, &val); val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708; ret |= pmic_reg_write(p, REG_POWER_CTL2, val); + + /* Set VUSBSEL and VUSBEN for USB PHY supply*/ + pmic_reg_read(p, REG_MODE_0, &val); + val |= (VUSBSEL_MC34708 | VUSBEN_MC34708); + ret |= pmic_reg_write(p, REG_MODE_0, val); + + /* Set SWBST to 5V in auto mode */ + val = SWBST_AUTO; + ret |= pmic_reg_write(p, SWBST_CTRL, val); } return ret; |
