Merge branch 'master' of git://git.denx.de/u-boot-usb

27 files changed, 199 insertions, 111 deletions

diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index cc36f4587c..2b5f1a62cc 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -16,6 +16,7 @@
 #include <asm/4xx_pcie.h>
 #include <asm/ppc4xx-gpio.h>
 #include <asm/errno.h>
+#include <usb.h>
 
 extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
@@ -188,7 +189,7 @@ int board_early_init_f(void)
 }
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	struct board_bcsr *bcsr_data =
 		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
@@ -229,7 +230,7 @@ int usb_board_stop(void)
 	return 0;
 }
 
-int usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
 	return usb_board_stop();
 }
diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c
index ecbac16d59..04e0574658 100644
--- a/board/balloon3/balloon3.c
+++ b/board/balloon3/balloon3.c
@@ -13,6 +13,7 @@
 #include <asm/io.h>
 #include <spartan3.h>
 #include <command.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -59,7 +60,7 @@ void dram_init_banksize(void)
 }
 
 #ifdef	CONFIG_CMD_USB
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
 		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
@@ -90,9 +91,9 @@ int usb_board_init(void)
 	return 0;
 }
 
-void usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	return;
+	return 0;
 }
 
 void usb_board_stop(void)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 17129081b7..53cb8dffd0 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -30,6 +30,7 @@
 #include <i2c.h>
 
 DECLARE_GLOBAL_DATA_PTR;
+#define GP_USB_OTG_PWR	IMX_GPIO_NR(3, 22)
 
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
@@ -179,6 +180,14 @@ iomux_v3_cfg_t const enet_pads2[] = {
 	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 };
 
+static iomux_v3_cfg_t const misc_pads[] = {
+	MX6_PAD_GPIO_1__USB_OTG_ID		| MUX_PAD_CTRL(WEAK_PULLUP),
+	MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC	| MUX_PAD_CTRL(WEAK_PULLUP),
+	MX6_PAD_EIM_D30__USBOH3_USBH1_OC	| MUX_PAD_CTRL(WEAK_PULLUP),
+	/* OTG Power enable */
+	MX6_PAD_EIM_D22__GPIO_3_22		| MUX_PAD_CTRL(OUTPUT_40OHM),
+};
+
 /* wl1271 pads on nitrogen6x */
 iomux_v3_cfg_t const wl12xx_pads[] = {
 	(MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK)
@@ -250,6 +259,15 @@ int board_ehci_hcd_init(int port)
 
 	return 0;
 }
+
+int board_ehci_power(int port, int on)
+{
+	if (port)
+		return 0;
+	gpio_set_value(GP_USB_OTG_PWR, on);
+	return 0;
+}
+
 #endif
 
 #ifdef CONFIG_FSL_ESDHC
@@ -369,6 +387,11 @@ int board_eth_init(bd_t *bis)
 		free(bus);
 	}
 #endif
+
+#ifdef CONFIG_MV_UDC
+	/* For otg ethernet*/
+	usb_eth_initialize(bis);
+#endif
 	return 0;
 }
 
@@ -685,6 +708,7 @@ int board_early_init_f(void)
 	gpio_direction_input(WL12XX_WL_IRQ_GP);
 	gpio_direction_output(WL12XX_WL_ENABLE_GP, 0);
 	gpio_direction_output(WL12XX_BT_ENABLE_GP, 0);
+	gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */
 
 	imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads));
 	setup_buttons();
@@ -706,6 +730,15 @@ int overwrite_console(void)
 
 int board_init(void)
 {
+	struct iomuxc_base_regs *const iomuxc_regs
+		= (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+
+	clrsetbits_le32(&iomuxc_regs->gpr[1],
+			IOMUXC_GPR1_OTG_ID_MASK,
+			IOMUXC_GPR1_OTG_ID_GPIO1);
+
+	imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads));
+
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 3caa5be845..19945c105e 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -565,7 +565,8 @@ struct omap_usbhs_board_data usbhs_bdata = {
 };
 
 #define SB_T35_USB_HUB_RESET_GPIO	167
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
 	u8 val;
 	int offset;
@@ -591,7 +592,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0);
 	udelay(1);
 
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 }
 
 int ehci_hcd_stop(void)
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index f13f088d55..5cc1d0d9d6 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -17,6 +17,7 @@
 #include <mtd/cfi_flash.h>
 #include <asm/4xx_pci.h>
 #include <pci.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -428,7 +429,7 @@ void reset_phy(void)
 }
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	return 0;
 }
@@ -453,9 +454,8 @@ int usb_board_stop(void)
 	return 0;
 }
 
-int usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	usb_board_stop();
-	return 0;
+	return usb_board_stop();
 }
 #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 549b3b73ce..88fc5f77b6 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -27,6 +27,7 @@
 #endif
 #include <serial.h>
 #include <asm/4xx_pci.h>
+#include <usb.h>
 
 #include "fpga.h"
 #include "pmc440.h"
@@ -821,7 +822,7 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
 }
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	char *act = getenv("usbact");
 	int i;
@@ -845,10 +846,9 @@ int usb_board_stop(void)
 	return 0;
 }
 
-int usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	usb_board_stop();
-	return 0;
+	return usb_board_stop();
 }
 #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
 
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 653d7ea71d..4330cf0ddb 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -40,9 +40,10 @@ static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 }
 
 int ehci_hcd_stop(int index)
diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c
index 1b68ef332a..92dd4ff97a 100644
--- a/board/icpdas/lp8x4x/lp8x4x.c
+++ b/board/icpdas/lp8x4x/lp8x4x.c
@@ -15,6 +15,7 @@
 #include <netdev.h>
 #include <serial.h>
 #include <asm/io.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -58,7 +59,7 @@ int board_mmc_init(bd_t *bis)
 #endif
 
 #ifdef	CONFIG_CMD_USB
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
 		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
@@ -89,9 +90,9 @@ int usb_board_init(void)
 	return 0;
 }
 
-void usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	return;
+	return 0;
 }
 
 void usb_board_stop(void)
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
index ff7ce828c6..6bbb527dab 100644
--- a/board/mpl/common/usb_uhci.c
+++ b/board/mpl/common/usb_uhci.c
@@ -584,7 +584,7 @@ void handle_usb_interrupt(void)
 
 /* init uhci
  */
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 {
 	unsigned char temp;
 	int	busdevfunc;
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 126e56e97a..1972527e7d 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -32,6 +32,7 @@
 #ifdef CONFIG_USB_EHCI_TEGRA
 #include <asm/arch-tegra/usb.h>
 #include <asm/arch/usb.h>
+#include <usb.h>
 #endif
 #ifdef CONFIG_TEGRA_MMC
 #include <asm/arch-tegra/tegra_mmc.h>
@@ -153,8 +154,9 @@ int board_init(void)
 
 #ifdef CONFIG_USB_EHCI_TEGRA
 	pin_mux_usb();
-	board_usb_init(gd->fdt_blob);
+	usb_process_devicetree(gd->fdt_blob);
 #endif
+
 #ifdef CONFIG_LCD
 	tegra_lcd_check_next_stage(gd->fdt_blob, 0);
 #endif
diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile
index 9e48a7b6e5..ad7564cddf 100644
--- a/board/samsung/common/Makefile
+++ b/board/samsung/common/Makefile
@@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)libsamsung.o
 
 COBJS-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o
+COBJS-$(CONFIG_THOR_FUNCTION) += thor.o
 
 SRCS    := $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/samsung/common/thor.c b/board/samsung/common/thor.c
new file mode 100644
index 0000000000..1c7630df08
--- /dev/null
+++ b/board/samsung/common/thor.c
@@ -0,0 +1,21 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/usb/ch9.h>
+
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	if (!strcmp(name, "usb_dnl_thor")) {
+		put_unaligned(CONFIG_G_DNL_THOR_VENDOR_NUM, &dev->idVendor);
+		put_unaligned(CONFIG_G_DNL_THOR_PRODUCT_NUM, &dev->idProduct);
+	} else {
+		put_unaligned(CONFIG_G_DNL_VENDOR_NUM, &dev->idVendor);
+		put_unaligned(CONFIG_G_DNL_PRODUCT_NUM, &dev->idProduct);
+	}
+	return 0;
+}
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
index b1bba9662e..c4ed3467cb 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -144,4 +144,8 @@
 	mmc@12230000 {
 		status = "disabled";
 	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpio 0xbe 0>; /* X26 */
+	};
 };
diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts
index 12cd67e49c..091cdb9e86 100644
--- a/board/samsung/dts/exynos5250-snow.dts
+++ b/board/samsung/dts/exynos5250-snow.dts
@@ -109,6 +109,14 @@
 		status = "disabled";
 	};
 
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */
+	};
+
 	tmu@10060000 {
 		samsung,min-temp	= <25>;
 		samsung,max-temp	= <125>;
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index bb4a82f449..6bcc883b10 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -61,22 +61,6 @@ struct local_info {
 
 static struct local_info local;
 
-#ifdef CONFIG_USB_EHCI_EXYNOS
-int board_usb_vbus_init(void)
-{
-	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
-						samsung_get_base_gpio_part1();
-
-	/* Enable VBUS power switch */
-	s5p_gpio_direction_output(&gpio1->x2, 6, 1);
-
-	/* VBUS turn ON time */
-	mdelay(3);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_SOUND_MAX98095
 static void  board_enable_audio_codec(void)
 {
@@ -122,9 +106,6 @@ int board_init(void)
 	if (board_init_cros_ec_devices(gd->fdt_blob))
 		return -1;
 
-#ifdef CONFIG_USB_EHCI_EXYNOS
-	board_usb_vbus_init();
-#endif
 #ifdef CONFIG_SOUND_MAX98095
 	board_enable_audio_codec();
 #endif
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 7f61d17abb..d31d511e39 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -26,6 +26,7 @@
 #include <power/max8997_muic.h>
 #include <power/battery.h>
 #include <power/max17042_fg.h>
+#include <usb.h>
 #include <usb_mass_storage.h>
 
 #include "setup.h"
@@ -495,10 +496,10 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
 	.usb_flags	= PHY0_SLEEP,
 };
 
-void board_usb_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	debug("USB_udc_probe\n");
-	s3c_udc_probe(&s5pc210_otg_data);
+	return s3c_udc_probe(&s5pc210_otg_data);
 }
 #endif
 
diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c
index eda9141c54..fbe79973e3 100644
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@@ -275,7 +275,7 @@ int factoryset_setenv(void)
 	return ret;
 }
 
-int g_dnl_bind_fixup(struct usb_device_descriptor *dev)
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
 {
 	put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor);
 	put_unaligned(factory_dat.usb_product_id, &dev->idProduct);
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index cd91d8fea0..054e7ccded 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -51,9 +51,10 @@ static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 }
 
 int ehci_hcd_stop(int index)
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index b4e01d1562..c32d554ea4 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -102,9 +102,10 @@ static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 }
 
 int ehci_hcd_stop(int index)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 62e9beaef3..9669a32fc1 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -521,9 +521,10 @@ static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
 };
 
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 }
 
 int ehci_hcd_stop(int index)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9a114e2a75..9657c75f23 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -17,12 +17,6 @@
 
 #include "mux_data.h"
 
-#ifdef CONFIG_USB_EHCI
-#include <usb.h>
-#include <asm/arch/ehci.h>
-#include <asm/ehci-omap.h>
-#endif
-
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
 #endif
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 6965cc57d2..38de9d5a8b 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -61,5 +61,6 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 	{GPMC_A4, (IEN | PDIS | M1)},   /* QSPI1_CS3 */
 	{GPMC_CS2, (IEN | PTU | PDIS | M1)},    /* QSPI1_CS0 */
 	{GPMC_CS3, (IEN | PTU | PDIS | M1)},    /* QSPI1_CS1*/
+	{USB2_DRVVBUS, (M0 | IEN | FSC) },
 };
 #endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 47063309e5..9458104604 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -14,7 +14,7 @@
 
 #include "mux_data.h"
 
-#ifdef CONFIG_USB_EHCI
+#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
 #include <usb.h>
 #include <asm/gpio.h>
 #include <asm/arch/clock.h>
@@ -72,6 +72,35 @@ int board_eth_init(bd_t *bis)
 	return 0;
 }
 
+#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+static void enable_host_clocks(void)
+{
+	int auxclk;
+	int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
+				OPTFCLKEN_HSIC480M_P3_CLK |
+				OPTFCLKEN_HSIC60M_P2_CLK |
+				OPTFCLKEN_HSIC480M_P2_CLK |
+				OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
+
+	/* Enable port 2 and 3 clocks*/
+	setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
+
+	/* Enable port 2 and 3 usb host ports tll clocks*/
+	setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
+			(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
+#ifdef CONFIG_USB_XHCI_OMAP
+	/* Enable the USB OTG Super speed clocks */
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
+			(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
+#endif
+
+	auxclk = readl((*prcm)->scrm_auxclk1);
+	/* Request auxilary clock */
+	auxclk |= AUXCLK_ENABLE_MASK;
+	writel(auxclk, (*prcm)->scrm_auxclk1);
+}
+#endif
+
 /**
  * @brief misc_init_r - Configure EVM board specific configurations
  * such as power configurations, ethernet initialization as phase2 of
@@ -81,9 +110,30 @@ int board_eth_init(bd_t *bis)
  */
 int misc_init_r(void)
 {
+	int reg;
+	uint8_t device_mac[6];
+
 #ifdef CONFIG_PALMAS_POWER
 	palmas_init_settings();
 #endif
+
+	if (!getenv("usbethaddr")) {
+		reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
+
+		/*
+		 * create a fake MAC address from the processor ID code.
+		 * first byte is 0x02 to signify locally administered.
+		 */
+		device_mac[0] = 0x02;
+		device_mac[1] = readl(reg + 0x10) & 0xff;
+		device_mac[2] = readl(reg + 0xC) & 0xff;
+		device_mac[3] = readl(reg + 0x8) & 0xff;
+		device_mac[4] = readl(reg) & 0xff;
+		device_mac[5] = (readl(reg) >> 8) & 0xff;
+
+		eth_setenv_enetaddr("usbethaddr", device_mac);
+	}
+
 	return 0;
 }
 
@@ -129,54 +179,14 @@ static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
 };
 
-static void enable_host_clocks(void)
-{
-	int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
-				OPTFCLKEN_HSIC480M_P3_CLK |
-				OPTFCLKEN_HSIC60M_P2_CLK |
-				OPTFCLKEN_HSIC480M_P2_CLK |
-				OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
-
-	/* Enable port 2 and 3 clocks*/
-	setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
-
-	/* Enable port 2 and 3 usb host ports tll clocks*/
-	setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
-			(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
-}
-
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
 	int ret;
-	int auxclk;
-	int reg;
-	uint8_t device_mac[6];
 
 	enable_host_clocks();
 
-	if (!getenv("usbethaddr")) {
-		reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
-
-		/*
-		 * create a fake MAC address from the processor ID code.
-		 * first byte is 0x02 to signify locally administered.
-		 */
-		device_mac[0] = 0x02;
-		device_mac[1] = readl(reg + 0x10) & 0xff;
-		device_mac[2] = readl(reg + 0xC) & 0xff;
-		device_mac[3] = readl(reg + 0x8) & 0xff;
-		device_mac[4] = readl(reg) & 0xff;
-		device_mac[5] = (readl(reg) >> 8) & 0xff;
-
-		eth_setenv_enetaddr("usbethaddr", device_mac);
-	}
-
-	auxclk = readl((*prcm)->scrm_auxclk1);
-	/* Request auxilary clock */
-	auxclk |= AUXCLK_ENABLE_MASK;
-	writel(auxclk, (*prcm)->scrm_auxclk1);
-
-	ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 	if (ret < 0) {
 		puts("Failed to initialize ehci\n");
 		return ret;
@@ -203,3 +213,23 @@ void usb_hub_reset_devices(int port)
 	}
 }
 #endif
+
+#ifdef CONFIG_USB_XHCI_OMAP
+/**
+ * @brief board_usb_init - Configure EVM board specific configurations
+ * for the LDO's and clocks for the USB blocks.
+ *
+ * @return 0
+ */
+int board_usb_init(int index, enum board_usb_init_type init)
+{
+	int ret;
+#ifdef CONFIG_PALMAS_USB_SS_PWR
+	ret = palmas_enable_ss_ldo();
+#endif
+
+	enable_host_clocks();
+
+	return 0;
+}
+#endif
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index bc3c29220e..c104024b10 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -269,7 +269,8 @@ static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
 	int ret;
 	unsigned int utmi_clk;
@@ -279,7 +280,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 	utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
 	sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk);
 
-	ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 	if (ret < 0)
 		return ret;
 
diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c
index c1e2562348..8d95e4d174 100644
--- a/board/toradex/colibri_pxa270/colibri_pxa270.c
+++ b/board/toradex/colibri_pxa270/colibri_pxa270.c
@@ -13,6 +13,7 @@
 #include <netdev.h>
 #include <asm/io.h>
 #include <serial.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -39,7 +40,7 @@ int dram_init(void)
 }
 
 #ifdef	CONFIG_CMD_USB
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
 		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
@@ -70,9 +71,9 @@ int usb_board_init(void)
 	return 0;
 }
 
-void usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	return;
+	return 0;
 }
 
 void usb_board_stop(void)
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
index c0c318f328..1ddf05dcdd 100644
--- a/board/trizepsiv/conxs.c
+++ b/board/trizepsiv/conxs.c
@@ -21,6 +21,7 @@
 #include <asm/arch/regs-mmc.h>
 #include <netdev.h>
 #include <asm/io.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,7 +43,7 @@ extern struct serial_device serial_stuart_device;
  * Miscelaneous platform dependent initialisations
  */
 
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
 		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
@@ -69,9 +70,9 @@ int usb_board_init(void)
 	return 0;
 }
 
-void usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	return;
+	return 0;
 }
 
 void usb_board_stop(void)
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
index 616736f5c4..8d777df846 100644
--- a/board/vpac270/vpac270.c
+++ b/board/vpac270/vpac270.c
@@ -13,6 +13,7 @@
 #include <netdev.h>
 #include <serial.h>
 #include <asm/io.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -66,7 +67,7 @@ int board_mmc_init(bd_t *bis)
 #endif
 
 #ifdef	CONFIG_CMD_USB
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
 	writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
 		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
@@ -97,9 +98,9 @@ int usb_board_init(void)
 	return 0;
 }
 
-void usb_board_init_fail(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
-	return;
+	return 0;
 }
 
 void usb_board_stop(void)