EP88x: remove remainders of dead board

Commit 1b0757e deleted the EP88x entry from boards.cfg file.
But it missed to remove include/configs/EP88x.h and board/ep88x/.

This commit removes them and adds EP88x to README.scrapyard.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

3 files changed, 0 insertions, 227 deletions

diff --git a/board/ep88x/Makefile b/board/ep88x/Makefile
deleted file mode 100644
index 07fa3f3a2f..0000000000
--- a/board/ep88x/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ep88x/ep88x.c b/board/ep88x/ep88x.c
deleted file mode 100644
index cad0bfc6ca..0000000000
--- a/board/ep88x/ep88x.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Embedded Planet EP88x boards.
- * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/*
- * SDRAM uses two Micron chips.
- * Minimal CPU frequency is 40MHz.
- */
-static uint sdram_table[] = {
-	/* Single read	(offset 0x00 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x01B98404,
-	0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Burst read	(offset 0x08 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x00BDC404,
-	0x00FFCC00, 0x00FFCC00, 0x01FB8C00, 0x1FF74C00,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Single write (offset 0x18 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEE8002, 0x01B90404,
-	0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Burst write	(offset 0x20 in UPM RAM) */
-	0xEFCBCC04, 0x0F37C804, 0x0EEE8000, 0x00BD4400,
-	0x00FFCC00, 0x00FFCC02, 0x01FB8C04, 0x1FF74C05,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-	0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
-
-	/* Refresh	(offset 0x30 in UPM RAM) */
-	0xEFFACC04, 0x0FF5CC04, 0x0FFFCC04, 0x1FFFCC04,
-	0xFFFFCC05, 0xFFFFCC05, 0xEFFB8C34, 0x0FF74C34,
-	0x0FFACCB4, 0x0FF5CC34, 0x0FFFC034, 0x0FFFC0B4,
-
-	/* Exception	(offset 0x3C in UPM RAM) */
-	0x0FEA8034, 0x1FB54034,	0xFFFFCC34, 0xFFFFCC05
-};
-
-int board_early_init_f (void)
-{
-	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
-
-	bcsr[0] |= 0x0C; /* Turn the LEDs off */
-	bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for
-			    flash detection by CFI driver
-			 */
-
-#if defined(CONFIG_8xx_CONS_SMC1)
-	bcsr[6] |= 0x10; /* Enables RS-232 transceiver */
-#endif
-#if defined(CONFIG_8xx_CONS_SCC2)
-	bcsr[7] |= 0x10; /* Enables RS-232 transceiver */
-#endif
-#ifdef CONFIG_ETHER_ON_FEC1
-	bcsr[8] |= 0xC0; /* Enable Ethernet 1 PHY */
-#endif
-#ifdef CONFIG_ETHER_ON_FEC2
-	bcsr[8] |= 0x30; /* Enable Ethernet 2 PHY */
-#endif
-
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
-
-	/* Configure SDRAM refresh */
-	memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */
-
-	memctl->memc_mamr = (65 << 24) | CONFIG_SYS_MAMR; /* No refresh */
-	udelay(100);
-
-	/* Run MRS pattern from location 0x36 */
-	memctl->memc_mar = 0x88;
-	memctl->memc_mcr = 0x80002236;
-	udelay(100);
-
-	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
-
-	msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
-	memctl->memc_or1  |= ~(msize - 1);
-
-	return msize;
-}
-
-int checkboard( void )
-{
-	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
-
-	puts("Board: ");
-	switch (bcsr[15]) {
-	case 0xE7:
-		puts("EP88xC 1.0");
-		break;
-	default:
-		printf("unknown ID=%02X", bcsr[15]);
-	}
-	printf("  CPLD revision %d\n", bcsr[14]);
-
-	return 0;
-}
diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds
deleted file mode 100644
index cbb17d1aee..0000000000
--- a/board/ep88x/u-boot.lds
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * (C) Copyright 2001-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Yuli Barcohen <yuli@arabellasw.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text          :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    *(.text*)
-    . = ALIGN(16);
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
-ENTRY(_start)