lcd: Let the board code show board-specific info

The information displayed when CONFIG_LCD_INFO is set is inherently
board-specific, so it should be done by the board code. The current code
dealing with this only handles two cases, and is already a horrible mess
of #ifdeffery.

Yes, this duplicates some code, but it also allows boards to print more
board-specific information; this used to be very difficult.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

6 files changed, 171 insertions, 0 deletions

diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 544c932f26..a1a9238f6e 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -326,6 +326,35 @@ static void at91cap9_lcd_hw_init(void)
 
 	gd->fb_base = 0;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_MAIN_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 76f56d6ae7..70f1db93f6 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -209,6 +209,35 @@ static void at91sam9261ek_lcd_hw_init(void)
 
 	gd->fb_base = AT91SAM9261_SRAM_BASE;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_MAIN_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index dd513b9e12..63f95e718f 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -260,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void)
 
 	gd->fb_base = AT91SAM9263_SRAM0_BASE;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_MAIN_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 7bf1f439b2..37e371ff2d 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -181,6 +181,35 @@ static void at91sam9rlek_lcd_hw_init(void)
 
 	gd->fb_base = 0;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_MAIN_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index aadd2540e8..9e572463d3 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -759,6 +759,35 @@ static uchar *key_match (uchar *kbd_data)
 }
 #endif /* CONFIG_PREBOOT */
 
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	char temp[32];
+
+	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__);
+	lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+	lcd_printf ("    Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+	lcd_printf ("MPC823 CPU at %s MHz\n",
+		strmhz(temp, gd->cpu_clk));
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+					info, strlen(info));
+	lcd_printf ("  %ld MB RAM, %ld MB Flash\n",
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#else
+	/* leave one blank line */
+	lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+		strmhz(temp, gd->cpu_clk),
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
 /*---------------Board Special Commands: PIC read/write ---------------*/
 
 #if defined(CONFIG_CMD_BSP)
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 9a0f3a0ff2..928afed661 100644
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -568,6 +568,32 @@ void ide_led (uchar led, uchar status)
 }
 # endif
 
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+
+void lcd_show_board_info(void)
+{
+	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__);
+	lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+	lcd_printf ("    Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+	lcd_printf ("MPC823 CPU at %s MHz\n",
+		strmhz(temp, gd->cpu_clk));
+	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+					info, strlen(info));
+	lcd_printf ("  %ld MB RAM, %ld MB Flash\n",
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#else
+	/* leave one blank line */
+	lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+		strmhz(temp, gd->cpu_clk),
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
 /* ---------------------------------------------------------------------------- */
 /* TK885D specific initializaion						*/
 /* ---------------------------------------------------------------------------- */