Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

10 files changed, 815 insertions, 531 deletions

diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile
index 501d9744e4..22bd6b197e 100644
--- a/board/samsung/common/Makefile
+++ b/board/samsung/common/Makefile
@@ -8,3 +8,7 @@
 obj-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o
 obj-$(CONFIG_THOR_FUNCTION) += thor.o
 obj-$(CONFIG_CMD_USB_MASS_STORAGE) += ums.o
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_BOARD_COMMON)	+= board.o
+endif
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
new file mode 100644
index 0000000000..cd873bc56d
--- /dev/null
+++ b/board/samsung/common/board.c
@@ -0,0 +1,411 @@
+/*
+ * (C) Copyright 2013 SAMSUNG Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <cros_ec.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <spi.h>
+#include <tmu.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include <power/pmic.h>
+#include <asm/arch/sromc.h>
+#include <power/max77686_pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct local_info {
+	struct cros_ec_dev *cros_ec_dev;	/* Pointer to cros_ec device */
+	int cros_ec_err;			/* Error for cros_ec, 0 if ok */
+};
+
+static struct local_info local;
+
+#if defined CONFIG_EXYNOS_TMU
+/* Boot Time Thermal Analysis for SoC temperature threshold breach */
+static void boot_temp_check(void)
+{
+	int temp;
+
+	switch (tmu_monitor(&temp)) {
+	case TMU_STATUS_NORMAL:
+		break;
+	case TMU_STATUS_TRIPPED:
+		/*
+		 * Status TRIPPED ans WARNING means corresponding threshold
+		 * breach
+		 */
+		puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+		set_ps_hold_ctrl();
+		hang();
+		break;
+	case TMU_STATUS_WARNING:
+		puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+		break;
+	case TMU_STATUS_INIT:
+		/*
+		 * TMU_STATUS_INIT means something is wrong with temperature
+		 * sensing and TMU status was changed back from NORMAL to INIT.
+		 */
+		puts("EXYNOS_TMU: WARNING! Temperature sensing not done\n");
+		break;
+	default:
+		debug("EXYNOS_TMU: Unknown TMU state\n");
+	}
+}
+#endif
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+#if defined CONFIG_EXYNOS_TMU
+	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+		debug("%s: Failed to init TMU\n", __func__);
+		return -1;
+	}
+	boot_temp_check();
+#endif
+
+#ifdef CONFIG_EXYNOS_SPI
+	spi_init();
+#endif
+	return exynos_init();
+}
+
+int dram_init(void)
+{
+	int i;
+	u32 addr;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+	}
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	int i;
+	u32 addr, size;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+
+		gd->bd->bi_dram[i].start = addr;
+		gd->bd->bi_dram[i].size = size;
+	}
+}
+
+static int board_uart_init(void)
+{
+	int err, uart_id, ret = 0;
+
+	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+		if (err) {
+			debug("UART%d not configured\n",
+			      (uart_id - PERIPH_ID_UART0));
+			ret |= err;
+		}
+	}
+	return ret;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+	board_i2c_init(gd->fdt_blob);
+#endif
+
+	return err;
+}
+#endif
+
+struct cros_ec_dev *board_get_cros_ec_dev(void)
+{
+	return local.cros_ec_dev;
+}
+
+#ifdef CONFIG_CROS_EC
+static int board_init_cros_ec_devices(const void *blob)
+{
+	local.cros_ec_err = cros_ec_init(blob, &local.cros_ec_dev);
+	if (local.cros_ec_err)
+		return -1;  /* Will report in board_late_init() */
+
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_POWER)
+#ifdef CONFIG_POWER_MAX77686
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+	u32 val;
+	int ret = 0;
+
+	ret = pmic_reg_read(p, reg, &val);
+	if (ret) {
+		debug("%s: PMIC %d register read failed\n", __func__, reg);
+		return -1;
+	}
+	val |= regval;
+	ret = pmic_reg_write(p, reg, val);
+	if (ret) {
+		debug("%s: PMIC %d register write failed\n", __func__, reg);
+		return -1;
+	}
+	return 0;
+}
+
+static int max77686_init(void)
+{
+	struct pmic *p;
+
+	if (pmic_init(I2C_PMIC))
+		return -1;
+
+	p = pmic_get("MAX77686_PMIC");
+	if (!p)
+		return -ENODEV;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+		return -1;
+
+	/* VDD_MIF */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+			   MAX77686_BUCK1OUT_1V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK1OUT);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+			    MAX77686_BUCK1CTRL_EN))
+		return -1;
+
+	/* VDD_ARM */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+			   MAX77686_BUCK2DVS1_1_3V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK2DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+			    MAX77686_BUCK2CTRL_ON))
+		return -1;
+
+	/* VDD_INT */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+			   MAX77686_BUCK3DVS1_1_0125V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK3DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_G3D */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+			   MAX77686_BUCK4DVS1_1_2V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK4DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_LDO2 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO3 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO5 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO10 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	return 0;
+}
+#endif
+
+int power_init_board(void)
+{
+	int ret = 0;
+
+	set_ps_hold_ctrl();
+
+#ifdef CONFIG_POWER_MAX77686
+	ret = max77686_init();
+#endif
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_OF_CONTROL
+static int decode_sromc(const void *blob, struct fdt_sromc *config)
+{
+	int err;
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
+	if (node < 0) {
+		debug("Could not find SROMC node\n");
+		return node;
+	}
+
+	config->bank = fdtdec_get_int(blob, node, "bank", 0);
+	config->width = fdtdec_get_int(blob, node, "width", 2);
+
+	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
+			FDT_SROM_TIMING_COUNT);
+	if (err < 0) {
+		debug("Could not decode SROMC configuration Error: %s\n",
+		      fdt_strerror(err));
+		return -FDT_ERR_NOTFOUND;
+	}
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+	u32 smc_bw_conf, smc_bc_conf;
+	struct fdt_sromc config;
+	fdt_addr_t base_addr;
+	int node;
+
+	node = decode_sromc(gd->fdt_blob, &config);
+	if (node < 0) {
+		debug("%s: Could not find sromc configuration\n", __func__);
+		return 0;
+	}
+	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
+	if (node < 0) {
+		debug("%s: Could not find lan9215 configuration\n", __func__);
+		return 0;
+	}
+
+	/* We now have a node, so any problems from now on are errors */
+	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
+	if (base_addr == FDT_ADDR_T_NONE) {
+		debug("%s: Could not find lan9215 address\n", __func__);
+		return -1;
+	}
+
+	/* Ethernet needs data bus width of 16 bits */
+	if (config.width != 2) {
+		debug("%s: Unsupported bus width %d\n", __func__,
+		      config.width);
+		return -1;
+	}
+	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
+			| SROMC_BYTE_ENABLE(config.bank);
+
+	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS])   |
+			SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
+			SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
+			SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
+			SROMC_BC_TAH(config.timing[FDT_SROM_TAH])   |
+			SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
+			SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
+
+	/* Select and configure the SROMC bank */
+	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
+	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
+	return smc911x_initialize(0, base_addr);
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+
+	/* dwmmc initializattion for available channels */
+	ret = exynos_dwmmc_init(gd->fdt_blob);
+	if (ret)
+		debug("dwmmc init failed\n");
+
+	return ret;
+}
+#endif
+#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	stdio_print_current_devices();
+
+	if (local.cros_ec_err) {
+		/* Force console on */
+		gd->flags &= ~GD_FLG_SILENT;
+
+		printf("cros-ec communications failure %d\n",
+		       local.cros_ec_err);
+		puts("\nPlease reset with Power+Refresh\n\n");
+		panic("Cannot init cros-ec device");
+		return -1;
+	}
+	return 0;
+}
+#endif
+
+int arch_early_init_r(void)
+{
+#ifdef CONFIG_CROS_EC
+	if (board_init_cros_ec_devices(gd->fdt_blob)) {
+		printf("%s: Failed to init EC\n", __func__);
+		return 0;
+	}
+#endif
+
+	return 0;
+}
diff --git a/board/samsung/dts/exynos5420-smdk5420.dts b/board/samsung/dts/exynos5420-smdk5420.dts
new file mode 100644
index 0000000000..d73976356d
--- /dev/null
+++ b/board/samsung/dts/exynos5420-smdk5420.dts
@@ -0,0 +1,169 @@
+/*
+ * SAMSUNG SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos5420.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5420 board based on EXYNOS5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5";
+
+	config {
+		hwid = "smdk5420 TEST A-A 9382";
+	};
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		i2c8 = "/i2c@12e00000";
+		i2c9 = "/i2c@12e10000";
+		i2c10 = "/i2c@12e20000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		xhci0 = "/xhci@12000000";
+		xhci1 = "/xhci@12400000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* s2mps11 is on i2c bus 4 */
+	i2c@12ca0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pmic@66 {
+			reg = <0x66>;
+			compatible = "samsung,s2mps11-pmic";
+		};
+	};
+
+	spi@12d20000 { /* spi0 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+		};
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	i2c@12c70000 {
+		soundcodec@1a {
+			reg = <0x1a>;
+			compatible = "wolfson,wm8994-codec";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index 6aa0509823..5fb8664936 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -25,44 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined CONFIG_EXYNOS_TMU
-/*
- * Boot Time Thermal Analysis for SoC temperature threshold breach
- */
-static void boot_temp_check(void)
-{
-	int temp;
-
-	switch (tmu_monitor(&temp)) {
-	/* Status TRIPPED ans WARNING means corresponding threshold breach */
-	case TMU_STATUS_TRIPPED:
-		puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
-		set_ps_hold_ctrl();
-		hang();
-		break;
-	case TMU_STATUS_WARNING:
-		puts("EXYNOS_TMU: WARNING! Temperature very high\n");
-		break;
-	/*
-	 * TMU_STATUS_INIT means something is wrong with temperature sensing
-	 * and TMU status was changed back from NORMAL to INIT.
-	 */
-	case TMU_STATUS_INIT:
-	default:
-		debug("EXYNOS_TMU: Unknown TMU state\n");
-	}
-}
-#endif
-
-struct local_info {
-	struct cros_ec_dev *cros_ec_dev;	/* Pointer to cros_ec device */
-	int cros_ec_err;			/* Error for cros_ec, 0 if ok */
-};
-
-static struct local_info local;
-
 #ifdef CONFIG_SOUND_MAX98095
-static void  board_enable_audio_codec(void)
+static void board_enable_audio_codec(void)
 {
 	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
 						samsung_get_base_gpio_part1();
@@ -73,261 +37,14 @@ static void  board_enable_audio_codec(void)
 }
 #endif
 
-struct cros_ec_dev *board_get_cros_ec_dev(void)
-{
-	return local.cros_ec_dev;
-}
-
-static int board_init_cros_ec_devices(const void *blob)
+int exynos_init(void)
 {
-	local.cros_ec_err = cros_ec_init(blob, &local.cros_ec_dev);
-	if (local.cros_ec_err)
-		return -1;  /* Will report in board_late_init() */
-
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
-
-#if defined CONFIG_EXYNOS_TMU
-	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
-		debug("%s: Failed to init TMU\n", __func__);
-		return -1;
-	}
-	boot_temp_check();
-#endif
-
-#ifdef CONFIG_EXYNOS_SPI
-	spi_init();
-#endif
-
-	if (board_init_cros_ec_devices(gd->fdt_blob))
-		return -1;
-
 #ifdef CONFIG_SOUND_MAX98095
 	board_enable_audio_codec();
 #endif
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-	u32 addr;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
-		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
-	}
-	return 0;
-}
-
-#if defined(CONFIG_POWER)
-static int pmic_reg_update(struct pmic *p, int reg, uint regval)
-{
-	u32 val;
-	int ret = 0;
-
-	ret = pmic_reg_read(p, reg, &val);
-	if (ret) {
-		debug("%s: PMIC %d register read failed\n", __func__, reg);
-		return -1;
-	}
-	val |= regval;
-	ret = pmic_reg_write(p, reg, val);
-	if (ret) {
-		debug("%s: PMIC %d register write failed\n", __func__, reg);
-		return -1;
-	}
-	return 0;
-}
-
-int power_init_board(void)
-{
-	struct pmic *p;
-
-	set_ps_hold_ctrl();
-
-	if (pmic_init(I2C_PMIC))
-		return -1;
-
-	p = pmic_get("MAX77686_PMIC");
-	if (!p)
-		return -ENODEV;
-
-	if (pmic_probe(p))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
-			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
-		return -1;
-
-	/* VDD_MIF */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
-			   MAX77686_BUCK1OUT_1V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK1OUT);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
-			    MAX77686_BUCK1CTRL_EN))
-		return -1;
-
-	/* VDD_ARM */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
-			   MAX77686_BUCK2DVS1_1_3V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK2DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
-			    MAX77686_BUCK2CTRL_ON))
-		return -1;
-
-	/* VDD_INT */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
-			   MAX77686_BUCK3DVS1_1_0125V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK3DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
-			    MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_G3D */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
-			   MAX77686_BUCK4DVS1_1_2V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK4DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
-			    MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_LDO2 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
-			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO3 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
-			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO5 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
-			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO10 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
-			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	return 0;
-}
-#endif
-
-void dram_init_banksize(void)
-{
-	int i;
-	u32 addr, size;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
-		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
-
-		gd->bd->bi_dram[i].start = addr;
-		gd->bd->bi_dram[i].size = size;
-	}
-}
-
-static int decode_sromc(const void *blob, struct fdt_sromc *config)
-{
-	int err;
-	int node;
-
-	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
-	if (node < 0) {
-		debug("Could not find SROMC node\n");
-		return node;
-	}
-
-	config->bank = fdtdec_get_int(blob, node, "bank", 0);
-	config->width = fdtdec_get_int(blob, node, "width", 2);
-
-	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
-			FDT_SROM_TIMING_COUNT);
-	if (err < 0) {
-		debug("Could not decode SROMC configuration Error: %s\n",
-		      fdt_strerror(err));
-		return -FDT_ERR_NOTFOUND;
-	}
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SMC911X
-	u32 smc_bw_conf, smc_bc_conf;
-	struct fdt_sromc config;
-	fdt_addr_t base_addr;
-	int node;
-
-	node = decode_sromc(gd->fdt_blob, &config);
-	if (node < 0) {
-		debug("%s: Could not find sromc configuration\n", __func__);
-		return 0;
-	}
-	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
-	if (node < 0) {
-		debug("%s: Could not find lan9215 configuration\n", __func__);
-		return 0;
-	}
-
-	/* We now have a node, so any problems from now on are errors */
-	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
-	if (base_addr == FDT_ADDR_T_NONE) {
-		debug("%s: Could not find lan9215 address\n", __func__);
-		return -1;
-	}
-
-	/* Ethernet needs data bus width of 16 bits */
-	if (config.width != 2) {
-		debug("%s: Unsupported bus width %d\n", __func__,
-		      config.width);
-		return -1;
-	}
-	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
-			| SROMC_BYTE_ENABLE(config.bank);
-
-	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS])   |
-			SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
-			SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
-			SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
-			SROMC_BC_TAH(config.timing[FDT_SROM_TAH])   |
-			SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
-			SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
-
-	/* Select and configure the SROMC bank */
-	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
-	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
-	return smc911x_initialize(0, base_addr);
-#endif
-	return 0;
-}
-
 #ifdef CONFIG_DISPLAY_BOARDINFO
 int checkboard(void)
 {
@@ -343,50 +60,6 @@ int checkboard(void)
 }
 #endif
 
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	int ret;
-	/* dwmmc initializattion for available channels */
-	ret = exynos_dwmmc_init(gd->fdt_blob);
-	if (ret)
-		debug("dwmmc init failed\n");
-
-	return ret;
-}
-#endif
-
-static int board_uart_init(void)
-{
-	int err, uart_id, ret = 0;
-
-	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
-		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
-		if (err) {
-			debug("UART%d not configured\n",
-			      (uart_id - PERIPH_ID_UART0));
-			ret |= err;
-		}
-	}
-	return ret;
-}
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-	int err;
-	err = board_uart_init();
-	if (err) {
-		debug("UART init failed\n");
-		return err;
-	}
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-	board_i2c_init(gd->fdt_blob);
-#endif
-	return err;
-}
-#endif
-
 #ifdef CONFIG_LCD
 void exynos_cfg_lcd_gpio(void)
 {
@@ -410,22 +83,3 @@ void exynos_set_dp_phy(unsigned int onoff)
 	set_dp_phy_ctrl(onoff);
 }
 #endif
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	stdio_print_current_devices();
-
-	if (local.cros_ec_err) {
-		/* Force console on */
-		gd->flags &= ~GD_FLG_SILENT;
-
-		printf("cros-ec communications failure %d\n",
-		       local.cros_ec_err);
-		puts("\nPlease reset with Power+Refresh\n\n");
-		panic("Cannot init cros-ec device");
-		return -1;
-	}
-	return 0;
-}
-#endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 97fe0adf54..943c29a698 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <cros_ec.h>
 #include <fdtdec.h>
 #include <asm/io.h>
 #include <errno.h>
@@ -26,7 +27,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_USB_EHCI_EXYNOS
-int board_usb_vbus_init(void)
+static int board_usb_vbus_init(void)
 {
 	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
 						samsung_get_base_gpio_part1();
@@ -53,13 +54,8 @@ static void  board_enable_audio_codec(void)
 }
 #endif
 
-int board_init(void)
+int exynos_init(void)
 {
-	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
-
-#ifdef CONFIG_EXYNOS_SPI
-	spi_init();
-#endif
 #ifdef CONFIG_USB_EHCI_EXYNOS
 	board_usb_vbus_init();
 #endif
@@ -69,147 +65,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-	u32 addr;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
-		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
-	}
-	return 0;
-}
-
-#if defined(CONFIG_POWER)
-static int pmic_reg_update(struct pmic *p, int reg, uint regval)
-{
-	u32 val;
-	int ret = 0;
-
-	ret = pmic_reg_read(p, reg, &val);
-	if (ret) {
-		debug("%s: PMIC %d register read failed\n", __func__, reg);
-		return -1;
-	}
-	val |= regval;
-	ret = pmic_reg_write(p, reg, val);
-	if (ret) {
-		debug("%s: PMIC %d register write failed\n", __func__, reg);
-		return -1;
-	}
-	return 0;
-}
-
-int power_init_board(void)
-{
-	struct pmic *p;
-
-	set_ps_hold_ctrl();
-
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	if (pmic_init(I2C_PMIC))
-		return -1;
-
-	p = pmic_get("MAX77686_PMIC");
-	if (!p)
-		return -ENODEV;
-
-	if (pmic_probe(p))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
-				MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
-		return -1;
-
-	/* VDD_MIF */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
-						MAX77686_BUCK1OUT_1_05V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-						MAX77686_REG_PMIC_BUCK1OUT);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
-						MAX77686_BUCK1CTRL_EN))
-		return -1;
-
-	/* VDD_ARM */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
-					MAX77686_BUCK2DVS1_1_3V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-						MAX77686_REG_PMIC_BUCK2DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
-					MAX77686_BUCK2CTRL_ON))
-		return -1;
-
-	/* VDD_INT */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
-					MAX77686_BUCK3DVS1_1_0125V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-						MAX77686_REG_PMIC_BUCK3DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
-					MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_G3D */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
-					MAX77686_BUCK4DVS1_1_2V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-						MAX77686_REG_PMIC_BUCK4DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
-					MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_LDO2 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
-				MAX77686_LD02CTRL1_1_5V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO3 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
-				MAX77686_LD03CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO5 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
-				MAX77686_LD05CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO10 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
-				MAX77686_LD10CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	return 0;
-}
-#endif
-
-void dram_init_banksize(void)
-{
-	int i;
-	u32 addr, size;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
-		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
-		gd->bd->bi_dram[i].start = addr;
-		gd->bd->bi_dram[i].size = size;
-	}
-}
-
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_SMC911X
@@ -301,21 +156,6 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-static int board_uart_init(void)
-{
-	int err, uart_id, ret = 0;
-
-	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
-		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
-		if (err) {
-			debug("UART%d not configured\n",
-			      (uart_id - PERIPH_ID_UART0));
-			ret |= err;
-		}
-	}
-	return ret;
-}
-
 void board_i2c_init(const void *blob)
 {
 	int i;
@@ -326,22 +166,6 @@ void board_i2c_init(const void *blob)
 	}
 }
 
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-	int err;
-	err = board_uart_init();
-	if (err) {
-		debug("UART init failed\n");
-		return err;
-	}
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-	board_i2c_init(NULL);
-#endif
-	return err;
-}
-#endif
-
 #ifdef CONFIG_LCD
 void exynos_cfg_lcd_gpio(void)
 {
diff --git a/board/samsung/smdk5420/Makefile b/board/samsung/smdk5420/Makefile
new file mode 100644
index 0000000000..c2f8886c99
--- /dev/null
+++ b/board/samsung/smdk5420/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright (C) 2013 Samsung Electronics
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= smdk5420_spl.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y	+= smdk5420.o
+endif
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c
new file mode 100644
index 0000000000..3ad2ad0e56
--- /dev/null
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include <lcd.h>
+#include <spi.h>
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/dp_info.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_USB_EHCI_EXYNOS
+static int board_usb_vbus_init(void)
+{
+	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+						samsung_get_base_gpio_part1();
+
+	/* Enable VBUS power switch */
+	s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+
+	/* VBUS turn ON time */
+	mdelay(3);
+
+	return 0;
+}
+#endif
+
+int exynos_init(void)
+{
+#ifdef CONFIG_USB_EHCI_EXYNOS
+	board_usb_vbus_init();
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_LCD
+void cfg_lcd_gpio(void)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
+
+	/* For Backlight */
+	s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
+	s5p_gpio_set_value(&gpio1->b2, 0, 1);
+
+	/* LCD power on */
+	s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
+	s5p_gpio_set_value(&gpio1->x1, 5, 1);
+
+	/* Set Hotplug detect for DP */
+	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+}
+
+vidinfo_t panel_info = {
+	.vl_freq	= 60,
+	.vl_col		= 2560,
+	.vl_row		= 1600,
+	.vl_width	= 2560,
+	.vl_height	= 1600,
+	.vl_clkp	= CONFIG_SYS_LOW,
+	.vl_hsp		= CONFIG_SYS_LOW,
+	.vl_vsp		= CONFIG_SYS_LOW,
+	.vl_dp		= CONFIG_SYS_LOW,
+	.vl_bpix	= 4,	/* LCD_BPP = 2^4, for output conosle on LCD */
+
+	/* wDP panel timing infomation */
+	.vl_hspw	= 32,
+	.vl_hbpd	= 80,
+	.vl_hfpd	= 48,
+
+	.vl_vspw	= 6,
+	.vl_vbpd	= 37,
+	.vl_vfpd	= 3,
+	.vl_cmd_allow_len = 0xf,
+
+	.win_id		= 3,
+	.cfg_gpio	= cfg_lcd_gpio,
+	.backlight_on	= NULL,
+	.lcd_power_on	= NULL,
+	.reset_lcd	= NULL,
+	.dual_lcd_enabled = 0,
+
+	.init_delay	= 0,
+	.power_on_delay = 0,
+	.reset_delay	= 0,
+	.interface_mode = FIMD_RGB_INTERFACE,
+	.dp_enabled	= 1,
+};
+
+static struct edp_device_info edp_info = {
+	.disp_info = {
+		.h_res = 2560,
+		.h_sync_width = 32,
+		.h_back_porch = 80,
+		.h_front_porch = 48,
+		.v_res = 1600,
+		.v_sync_width  = 6,
+		.v_back_porch = 37,
+		.v_front_porch = 3,
+		.v_sync_rate = 60,
+	},
+	.lt_info = {
+		.lt_status = DP_LT_NONE,
+	},
+	.video_info = {
+		.master_mode = 0,
+		.bist_mode = DP_DISABLE,
+		.bist_pattern = NO_PATTERN,
+		.h_sync_polarity = 0,
+		.v_sync_polarity = 0,
+		.interlaced = 0,
+		.color_space = COLOR_RGB,
+		.dynamic_range = VESA,
+		.ycbcr_coeff = COLOR_YCBCR601,
+		.color_depth = COLOR_8,
+	},
+};
+
+static struct exynos_dp_platform_data dp_platform_data = {
+	.phy_enable	= set_dp_phy_ctrl,
+	.edp_dev_info	= &edp_info,
+};
+
+void init_panel_info(vidinfo_t *vid)
+{
+	vid->rgb_mode   = MODE_RGB_P;
+
+	exynos_set_dp_platform_data(&dp_platform_data);
+}
+#endif
+
+int board_get_revision(void)
+{
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	const char *board_name;
+
+	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+	if (board_name == NULL)
+		printf("\nUnknown Board\n");
+	else
+		printf("\nBoard: %s\n", board_name);
+
+	return 0;
+}
+#endif
diff --git a/board/samsung/smdk5420/smdk5420_spl.c b/board/samsung/smdk5420/smdk5420_spl.c
new file mode 100644
index 0000000000..73359f784c
--- /dev/null
+++ b/board/samsung/smdk5420/smdk5420_spl.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2013 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/clk.h>
+
+#define SIGNATURE	0xdeadbeef
+
+/* Parameters of early board initialization in SPL */
+static struct spl_machine_param machine_param
+		__attribute__((section(".machine_param"))) = {
+	.signature	= SIGNATURE,
+	.version	= 1,
+	.params		= "vmubfasirM",
+	.size		= sizeof(machine_param),
+
+	.mem_iv_size	= 0x1f,
+	.mem_type	= DDR_MODE_DDR3,
+
+	/*
+	 * Set uboot_size to 0x100000 bytes.
+	 *
+	 * This is an overly conservative value chosen to accommodate all
+	 * possible U-Boot image.  You are advised to set this value to a
+	 * smaller realistic size via scripts that modifies the .machine_param
+	 * section of output U-Boot image.
+	 */
+	.uboot_size	= 0x100000,
+
+	.boot_source	= BOOT_MODE_OM,
+	.frequency_mhz	= 800,
+	.arm_freq_mhz	= 900,
+	.serial_base	= 0x12c30000,
+	.i2c_base	= 0x12c60000,
+	.mem_manuf	= MEM_MANUF_SAMSUNG,
+};
+
+struct spl_machine_param *spl_get_machine_params(void)
+{
+	if (machine_param.signature != SIGNATURE) {
+		/* Will hang if SIGNATURE dont match */
+		while (1)
+			;
+	}
+
+	return &machine_param;
+}
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 8aba51c009..640a193dc2 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -295,7 +295,7 @@ int power_init_board(void)
 	 */
 	ret = pmic_init(I2C_5);
 	ret |= pmic_init_max8997();
-	ret |= power_fg_init(I2C_8);
+	ret |= power_fg_init(I2C_9);
 	ret |= power_muic_init(I2C_5);
 	ret |= power_bat_init(0);
 	if (ret)
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index 147de179cc..be15357e69 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -195,9 +195,9 @@ int power_init_board(void)
 #endif
 	pmic_init(I2C_7);		/* I2C adapter 7 - bus name s3c24x0_7 */
 	pmic_init_max77686();
-	pmic_init_max77693(I2C_9);	/* I2C adapter 9 - bus name soft1 */
-	power_muic_init(I2C_9);		/* I2C adapter 9 - bus name soft1 */
-	power_fg_init(I2C_8);		/* I2C adapter 8 - bus name soft0 */
+	pmic_init_max77693(I2C_10);	/* I2C adapter 10 - bus name soft1 */
+	power_muic_init(I2C_10);	/* I2C adapter 10 - bus name soft1 */
+	power_fg_init(I2C_9);		/* I2C adapter 9 - bus name soft0 */
 	power_bat_init(0);
 
 	p_chrg = pmic_get("MAX77693_PMIC");