* Patch by Robert Schwebel, 21 Jan 2003:

  - Add support for Innokom board
  - Don't complain if "install" fails
  - README cleanup (remove duplicated lines)
  - Update PXA header files

* Add documentation for existing POST code (doc/README.POST)

* Patch by Laudney Ren, 15 Jan 2003:
  Fix handling of redundand environment in "tools/envcrc.c"

* Patch by Detlev Zundel, 28 Feb 2003:
  Add bedbug support for 824x systems

* Add support for 16 MB flash configuration of TRAB board

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS

* Add image information to README

* Fix dual PCMCIA slot support (when running with just one
  slot populated)

* Add VFD type detection to trab board

* extend drivers/cs8900.c driver to synchronize  ethaddr  environment
  variable with value in the EEPROM

7 files changed, 1192 insertions, 131 deletions

diff --git a/board/innokom/Makefile b/board/innokom/Makefile
new file mode 100644
index 0000000000..7fbe76b727
--- /dev/null
+++ b/board/innokom/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= innokom.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/innokom/config.mk b/board/innokom/config.mk
new file mode 100644
index 0000000000..939ffffcf1
--- /dev/null
+++ b/board/innokom/config.mk
@@ -0,0 +1,16 @@
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to c170'0000, the upper 1 MB of second bank
+#
+# download areas is c800'0000
+#
+
+# This is the address where U-Boot lives in flash:
+#TEXT_BASE = 0
+
+# FIXME: armboot does only work correctly when being compiled
+# for the addresses _after_ relocation to RAM!! Otherwhise the
+# .bss segment is assumed in flash...
+TEXT_BASE = 0xa1fe0000
+
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
new file mode 100644
index 0000000000..b8e97e1865
--- /dev/null
+++ b/board/innokom/flash.c
@@ -0,0 +1,377 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+#define FLASH_BANK_SIZE 0x02000000
+#define MAIN_SECT_SIZE  0x40000         /* 2x16 = 256k per sector */
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+/**
+ * flash_init: - initialize data structures for flash chips
+ *
+ * @return: size of the flash
+ */
+
+ulong flash_init(void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+		flash_info[i].flash_id =
+	  		(INTEL_MANUFACT & FLASH_VENDMASK) |
+	  		(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+		switch (i) {
+			case 0:
+				flashbase = PHYS_FLASH_1;
+				break;
+			default:
+				panic("configured to many flash banks!\n");
+				break;
+		}
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors */
+	flash_protect(FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+			&flash_info[0]);
+
+#ifdef CFG_ENV_IS_IN_FLASH
+	flash_protect(FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			&flash_info[0]);
+#endif
+
+	return size;
+}
+
+
+/**
+ * flash_print_info: - print information about the flash situation
+ *
+ * @param info:
+ */
+
+void flash_print_info  (flash_info_t *info)
+{
+	int i, j;
+
+	for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+
+		switch (info->flash_id & FLASH_VENDMASK) {
+
+			case (INTEL_MANUFACT & FLASH_VENDMASK):
+				printf("Intel: ");
+				break;
+			default:
+				printf("Unknown Vendor ");
+				break;
+		}
+
+		switch (info->flash_id & FLASH_TYPEMASK) {
+
+			case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+				printf("28F128J3 (128Mbit)\n");
+				break;
+			default:
+				printf("Unknown Chip Type\n");
+				return;
+		}
+
+		printf("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+		printf("  Sector Start Addresses:");
+		for (i = 0; i < info->sector_count; i++) {
+			if ((i % 5) == 0) printf ("\n   ");
+
+			printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+		}
+		printf ("\n");
+		info++;
+	}
+}
+
+
+/**
+ * flash_erase: - erase flash sectors
+ *
+ */
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	int rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
+		return ERR_UNKNOWN_FLASH_VENDOR;
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) prot++;
+	}
+
+	if (prot) return ERR_PROTECTED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+
+		printf("Erasing sector %2d ... ", sect);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			u32 * volatile addr = (u32 * volatile)(info->start[sect]);
+
+			/* erase sector:                                    */
+			/* The strata flashs are aligned side by side on    */
+			/* the data bus, so we have to write the commands   */
+			/* to both chips here:                              */
+
+			*addr = 0x00200020;	/* erase setup */
+			*addr = 0x00D000D0;	/* erase confirm */
+
+			while ((*addr & 0x00800080) != 0x00800080) {
+				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+					*addr = 0x00B000B0; /* suspend erase*/
+					*addr = 0x00FF00FF; /* read mode    */
+					rc = ERR_TIMOUT;
+					goto outahere;
+				}
+			}
+
+			*addr = 0x00500050; /* clear status register cmd.   */
+			*addr = 0x00FF00FF; /* resest to read mode          */
+
+		}
+
+		printf("ok.\n");
+	}
+
+	if (ctrlc()) printf("User Interrupt!\n");
+
+	outahere:
+
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked(10000);
+
+	if (flag) enable_interrupts();
+
+	return rc;
+}
+
+
+/**
+ * write_word: - copy memory to flash
+ *
+ * @param info:
+ * @param dest:
+ * @param data:
+ * @return:
+ */
+
+static int write_word (flash_info_t *info, ulong dest, ushort data)
+{
+	ushort *addr = (ushort *)dest, val;
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts();
+
+	/* clear status register command */
+	*addr = 0x50;
+
+	/* program set-up command */
+	*addr = 0x40;
+
+	/* latch address/data */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+
+	/* wait while polling the status register */
+	while(((val = *addr) & 0x80) != 0x80) {
+		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+			rc = ERR_TIMOUT;
+			*addr = 0xB0; /* suspend program command */
+			goto outahere;
+		}
+	}
+
+	if(val & 0x1A) {	/* check for error */
+		printf("\nFlash write error %02x at address %08lx\n",
+			(int)val, (unsigned long)dest);
+		if(val & (1<<3)) {
+			printf("Voltage range error.\n");
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
+		if(val & (1<<1)) {
+			printf("Device protect error.\n");
+			rc = ERR_PROTECTED;
+			goto outahere;
+		}
+		if(val & (1<<4)) {
+			printf("Programming error.\n");
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
+		rc = ERR_PROG_ERROR;
+		goto outahere;
+	}
+
+	outahere:
+
+	*addr = 0xFF; /* read array command */
+	if (flag) enable_interrupts();
+
+	return rc;
+}
+
+
+/**
+ * write_buf: - Copy memory to flash.
+ *
+ * @param info:
+ * @param src:	source of copy transaction
+ * @param addr:	where to copy to
+ * @param cnt: 	number of bytes to copy
+ *
+ * @return	error code
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	ushort data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *)cp << 8);
+		}
+		for (; i<2 && cnt>0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *)cp << 8);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		/* data = *((vushort*)src); */
+		data = *((ushort*)src);
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp  += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0) return ERR_OK;
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i<2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *)cp << 8);
+	}
+
+	return write_word(info, wp, data);
+}
+
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
new file mode 100644
index 0000000000..7d2702f658
--- /dev/null
+++ b/board/innokom/innokom.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
+ * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
+ * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+
+/**
+ * board_init: - setup some data structures
+ *
+ * @return: 0 in case of success
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of Innokom board */
+	gd->bd->bi_arch_number = 258;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+
+/**
+ * dram_init: - setup dynamic RAM
+ *
+ * @return: 0 in case of success
+ */
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+
+/**
+ * innokom_set_led: - switch LEDs on or off
+ *
+ * @param led:   LED to switch (0,1,2)
+ * @param state: switch on (1) or off (0)
+ */
+
+void innokom_set_led(int led, int state)
+{
+	switch(led) {
+/*
+		case 0: if (state==1) {
+				GPCR0 |= CSB226_USER_LED0;
+			} else if (state==0) {
+				GPSR0 |= CSB226_USER_LED0;
+			}
+			break;
+
+		case 1: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED1;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED1;
+                        }
+                        break;
+
+		case 2: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED2;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED2;
+                        }
+                        break;
+*/
+	}
+
+	return;
+}
+
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
+ */
+
+void show_boot_progress (int status)
+{
+	switch(status) {
+/*
+		case  1: csb226_set_led(0,1); break;
+		case  5: csb226_set_led(1,1); break;
+		case 15: csb226_set_led(2,1); break;
+*/
+	}
+
+	return;
+}
+
diff --git a/board/innokom/memsetup.S b/board/innokom/memsetup.S
new file mode 100644
index 0000000000..f7d5eee575
--- /dev/null
+++ b/board/innokom/memsetup.S
@@ -0,0 +1,429 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE:  .long   CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+   .macro CPWAIT reg
+   mrc  p15,0,\reg,c2,c0,0
+   mov  \reg,\reg
+   sub  pc,pc,#4
+   .endm
+
+
+/*
+ * 	Memory setup
+ */
+
+.globl memsetup
+memsetup:
+
+    mov      r10, lr
+
+	/* Set up GPIO pins first ----------------------------------------- */
+
+	ldr		r0,	=GPSR0
+	ldr		r1,	=CFG_GPSR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR1
+	ldr		r1,	=CFG_GPSR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR2
+	ldr		r1,	=CFG_GPSR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR0
+	ldr		r1,	=CFG_GPCR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR1
+	ldr		r1,	=CFG_GPCR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR2
+	ldr		r1,	=CFG_GPCR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR0
+	ldr		r1,	=CFG_GPDR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR1
+	ldr		r1,	=CFG_GPDR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR2
+	ldr		r1,	=CFG_GPDR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_L
+	ldr		r1,	=CFG_GAFR0_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_U
+	ldr		r1,	=CFG_GAFR0_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_L
+	ldr		r1,	=CFG_GAFR1_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_U
+	ldr		r1,	=CFG_GAFR1_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_L
+	ldr		r1,	=CFG_GAFR2_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_U
+	ldr		r1,	=CFG_GAFR2_U_VAL
+	str		r1,   [r0]
+
+	ldr	r0,	=PSSR		/* enable GPIO pins */
+	ldr		r1,	=CFG_PSSR_VAL
+	str		r1,   [r0]
+
+/*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
+/*	ldr	r2,	=CFG_MSC1_VAL	/  high - bank 3 Ethernet Controller */
+/*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
+/*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
+/* */
+/*	ldr	r1,	=LED_BLANK */
+/*	mov	r0,	#0xFF */
+/*	str	r0,	[r1]		/  turn on hex leds */
+/* */
+/*loop: */
+/* */
+/*   ldr	r0, =0xB0070001 */
+/*   ldr    	r1, =_LED */
+/*   str    	r0, [r1]		/  hex display */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Enable memory interface                                          */
+	/*                                                                  */
+	/* The sequence below is based on the recommended init steps        */
+	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+	/* Chapter 10.                                                      */
+	/* ---------------------------------------------------------------- */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
+	/*         clocks to settle. Only necessary after hard reset...     */
+	/*         FIXME: can be optimized later                            */
+	/* ---------------------------------------------------------------- */
+
+	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
+	mov r2, #0
+	str r2, [r3]
+	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
+					/* so 0x300 should be plenty        */
+1:
+	ldr r2, [r3]
+	cmp r4, r2
+	bgt 1b
+
+mem_init:
+
+        ldr     r1,  =MEMC_BASE		/* get memory controller base addr. */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2a: Initialize Asynchronous static memory controller        */
+	/* ---------------------------------------------------------------- */
+
+	/* MSC registers: timing, bus width, mem type                       */
+
+        /* MSC0: nCS(0,1)                                                   */
+        ldr     r2,   =CFG_MSC0_VAL
+        str     r2,   [r1, #MSC0_OFFSET]
+        ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
+						/* that data latches        */
+        /* MSC1: nCS(2,3)                                                   */
+        ldr     r2,  =CFG_MSC1_VAL
+        str     r2,  [r1, #MSC1_OFFSET]
+        ldr     r2,  [r1, #MSC1_OFFSET]
+
+	/* MSC2: nCS(4,5)                                                   */
+        ldr     r2,  =CFG_MSC2_VAL
+        str     r2,  [r1, #MSC2_OFFSET]
+        ldr     r2,  [r1, #MSC2_OFFSET]
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2b: Initialize Card Interface                               */
+	/* ---------------------------------------------------------------- */
+
+	/* MECR: Memory Expansion Card Register                             */
+        ldr     r2,  =CFG_MECR_VAL
+        str     r2,  [r1, #MECR_OFFSET]
+	ldr	r2,	[r1, #MECR_OFFSET]
+
+	/* MCMEM0: Card Interface slot 0 timing                             */
+        ldr     r2,  =CFG_MCMEM0_VAL
+        str     r2,  [r1, #MCMEM0_OFFSET]
+	ldr	r2,	[r1, #MCMEM0_OFFSET]
+
+        /* MCMEM1: Card Interface slot 1 timing                             */
+        ldr     r2,  =CFG_MCMEM1_VAL
+        str     r2,  [r1, #MCMEM1_OFFSET]
+	ldr	r2,	[r1, #MCMEM1_OFFSET]
+
+	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
+        ldr     r2,  =CFG_MCATT0_VAL
+        str     r2,  [r1, #MCATT0_OFFSET]
+	ldr	r2,	[r1, #MCATT0_OFFSET]
+
+	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
+        ldr     r2,  =CFG_MCATT1_VAL
+        str     r2,  [r1, #MCATT1_OFFSET]
+	ldr	r2,	[r1, #MCATT1_OFFSET]
+
+	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
+        ldr     r2,  =CFG_MCIO0_VAL
+        str     r2,  [r1, #MCIO0_OFFSET]
+	ldr	r2,	[r1, #MCIO0_OFFSET]
+
+	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
+        ldr     r2,  =CFG_MCIO1_VAL
+        str     r2,  [r1, #MCIO1_OFFSET]
+	ldr	r2,	[r1, #MCIO1_OFFSET]
+
+	/* ---------------------------------------------------------------- */
+        /* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
+        /* ---------------------------------------------------------------- */
+
+
+	/* ---------------------------------------------------------------- */
+        /* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
+        /* ---------------------------------------------------------------- */
+
+	/* Before accessing MDREFR we need a valid DRI field, so we set     */
+	/* this to power on defaults + DIR field.                           */
+
+	ldr	r4,	=0x03ca4fff
+	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
+        ldr     r4,	[r1, #MDREFR_OFFSET]
+
+	ldr	r4,	=0x03ca4030
+	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
+	ldr	r4,	[r1, #MDREFR_OFFSET]
+
+        /* Note: preserve the mdrefr value in r4                            */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
+	/* ---------------------------------------------------------------- */
+
+	/* Initialize SXCNFG register. Assert the enable bits               */
+
+	/* Write SXMRS to cause an MRS command to all enabled banks of      */
+	/* synchronous static memory. Note that SXLCR need not be written   */
+	/* at this time.                                                    */
+
+	/* FIXME: we use async mode for now                                 */
+
+
+        /* ---------------------------------------------------------------- */
+        /* Step 4: Initialize SDRAM                                         */
+        /* ---------------------------------------------------------------- */
+
+	/* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure      */
+	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
+
+	orr	r4,	r4,	#(MDREFR_K1RUN|MDREFR_K0RUN)
+
+	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+	ldr     r4,     [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
+
+	bic	r4,	r4,	#(MDREFR_SLFRSH)
+
+        str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+        ldr     r4,     [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4c: assert MDREFR:E1PIN and E0PIO                           */
+
+	orr	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
+
+        str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+        ldr     r4,     [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
+	/*          configure but not enable each SDRAM partition pair.     */
+
+	ldr	r4,	=CFG_MDCNFG_VAL
+	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
+
+        str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
+        ldr     r4,     [r1, #MDCNFG_OFFSET]
+
+
+	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
+	/*          100..200 µsec.                                          */
+
+	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
+	mov r2, #0
+	str r2, [r3]
+	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
+					/* so 0x300 should be plenty        */
+1:
+	ldr r2, [r3]
+	cmp r4, r2
+	bgt 1b
+
+
+	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
+	/*          attempting non-burst read or write accesses to disabled */
+	/*          SDRAM, as commonly specified in the power up sequence   */
+	/*          documented in SDRAM data sheets. The address(es) used   */
+	/*          for this purpose must not be cacheable.                 */
+
+	ldr	r3,	=CFG_DRAM_BASE
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+	str	r2,	[r3]
+
+
+	/* Step 4g: Write MDCNFG with enable bits asserted                  */
+	/*          (MDCNFG:DEx set to 1).                                  */
+
+	ldr	r3, [r1, #MDCNFG_OFFSET]
+	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
+	str	r3, [r1, #MDCNFG_OFFSET]
+
+	/* Step 4h: Write MDMRS.                                            */
+
+        ldr     r2,  =CFG_MDMRS_VAL
+        str     r2,  [r1, #MDMRS_OFFSET]
+
+
+	/* We are finished with Intel's memory controller initialisation    */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Disable (mask) all interrupts at interrupt controller            */
+	/* ---------------------------------------------------------------- */
+
+initirqs:
+
+        mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
+        ldr     r2,  =ICLR
+        str     r1,  [r2]
+
+        ldr     r2,  =ICMR	/* mask all interrupts at the controller    */
+        str     r1,  [r2]
+
+
+        /* ---------------------------------------------------------------- */
+	/* Clock initialisation                                             */
+        /* ---------------------------------------------------------------- */
+
+initclks:
+
+	/* Disable the peripheral clocks, and set the core clock frequency  */
+	/* (hard-coding at 398.12MHz for now).                              */
+
+	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
+	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
+        ldr     r1,  =CKEN
+        mov     r2,  #0
+        str     r2,  [r1]
+
+
+        /* default value in case no valid rotary switch setting is found    */
+        ldr     r2, =(CCCR_L27|CCCR_M2|CCCR_N10)  /* DEFAULT: {200/200/100} */
+
+        /* ... and write the core clock config register                     */
+        ldr     r1,  =CCCR
+        str     r2,  [r1]
+
+	/* enable the 32Khz oscillator for RTC and PowerManager             */
+/*
+        ldr     r1,  =OSCC
+        mov     r2,  #OSCC_OON
+        str     r2,  [r1]
+*/
+	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
+	/* has settled.                                                     */
+60:
+        ldr     r2, [r1]
+        ands    r2, r2, #1
+        beq     60b
+
+	/* ---------------------------------------------------------------- */
+	/*                                                                  */
+        /* ---------------------------------------------------------------- */
+
+	/* Save SDRAM size                                                  */
+	ldr	r1, =DRAM_SIZE
+	str	r8, [r1]
+
+	/* Interrupt init: Mask all interrupts                              */
+	ldr	r0, =ICMR			/* enable no sources        */
+	mov	r1, #0
+	str	r1, [r0]
+
+	/* FIXME */
+
+#define NODEBUG
+#ifdef NODEBUG
+	/*Disable software and data breakpoints */
+	mov	r0,#0
+	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
+	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
+	mcr	p15,0,r0,c14,c4,0  /* dbcon */
+
+	/*Enable all debug functionality */
+	mov	r0,#0x80000000
+	mcr	p14,0,r0,c10,c0,0  /* dcsr */
+
+#endif
+
+        /* ---------------------------------------------------------------- */
+	/* End memsetup                                                     */
+        /* ---------------------------------------------------------------- */
+
+endmemsetup:
+
+    mov     pc, lr
+
diff --git a/board/innokom/u-boot.lds b/board/innokom/u-boot.lds
new file mode 100644
index 0000000000..0a89b3288d
--- /dev/null
+++ b/board/innokom/u-boot.lds
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+        . = 0x00000000;
+
+        . = ALIGN(4);
+	.text      :
+	{
+	  cpu/xscale/start.o	(.text)
+	  *(.text)
+	}
+
+        . = ALIGN(4);
+        .rodata : { *(.rodata) }
+
+        . = ALIGN(4);
+        .data : { *(.data) }
+
+        . = ALIGN(4);
+        .got : { *(.got) }
+
+	armboot_end_data = .;
+
+        . = ALIGN(4);
+        .bss : { *(.bss) }
+
+	armboot_end = .;
+}
diff --git a/board/r360mpi/flash.c b/board/r360mpi/flash.c
index 80bcd25451..e38dfcc2fe 100644
--- a/board/r360mpi/flash.c
+++ b/board/r360mpi/flash.c
@@ -24,10 +24,12 @@
  * MA 02111-1307 USA
  */
 
+/* #define DEBUG */
+
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 #if defined(CFG_ENV_IS_IN_FLASH)
 # ifndef  CFG_ENV_ADDR
@@ -52,44 +54,44 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 #define FLASH_PORT_WIDTH16
 
 #ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
+#define FLASH_PORT_WIDTH	ushort
+#define FLASH_PORT_WIDTHV	vu_short
 #else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
+#define FLASH_PORT_WIDTH	ulong
+#define FLASH_PORT_WIDTHV	vu_long
 #endif
 
-#define FPW		FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
+#define FPW			FLASH_PORT_WIDTH
+#define FPWV			FLASH_PORT_WIDTHV
 
 /*-----------------------------------------------------------------------
  * Functions
  */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int   write_data (flash_info_t *info, ulong dest, FPW data);
-static void  flash_get_offsets (ulong base, flash_info_t *info);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
 
 /*-----------------------------------------------------------------------
  */
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
-	size_b0 = flash_get_size((FPW *)FLASH_BASE0_PRELIM, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) FLASH_BASE0_PRELIM, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
+			size_b0, size_b0 << 20);
 	}
 
 	/* Remap FLASH according to real size */
@@ -97,24 +99,24 @@ unsigned long flash_init (void)
 	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
 
 	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
 
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
 	/* monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
-			    &flash_info[0]);
+	(void) flash_protect (FLAG_PROTECT_SET,
+				CFG_FLASH_BASE,
+				CFG_FLASH_BASE + CFG_MONITOR_LEN - 1,
+				&flash_info[0]);
 #endif
 
 #ifdef	CFG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      &flash_info[0]);
+	flash_protect (FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			&flash_info[0]);
 #endif
 
 	flash_info[0].size = size_b0;
@@ -124,7 +126,7 @@ unsigned long flash_init (void)
 
 /*-----------------------------------------------------------------------
  */
-static void flash_get_offsets (ulong base, flash_info_t *info)
+static void flash_get_offsets (ulong base, flash_info_t * info)
 {
 	int i;
 
@@ -141,7 +143,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 
 /*-----------------------------------------------------------------------
  */
-void flash_print_info  (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
 {
 	int i;
 
@@ -151,31 +153,39 @@ void flash_print_info  (flash_info_t *info)
 	}
 
 	switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-		default:		printf ("Unknown Vendor ");	break;
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
 	}
 
 	switch (info->flash_id & FLASH_TYPEMASK) {
-   case FLASH_28F320J3A:
-				printf ("28F320J3A\n"); break;
-   case FLASH_28F640J3A:
-				printf ("28F640J3A\n"); break;
-   case FLASH_28F128J3A:
-				printf ("28F128J3A\n"); break;
-	default:		printf ("Unknown Chip Type\n"); break;
+	case FLASH_28F320J3A:
+		printf ("28F320J3A\n");
+		break;
+	case FLASH_28F640J3A:
+		printf ("28F640J3A\n");
+		break;
+	case FLASH_28F128J3A:
+		printf ("28F128J3A\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
 	}
 
 	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
+			info->size >> 20, info->sector_count);
 
 	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
+	for (i = 0; i < info->sector_count; ++i) {
 		if ((i % 5) == 0)
 			printf ("\n   ");
 		printf (" %08lX%s",
 			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
+			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf ("\n");
 	return;
@@ -192,49 +202,53 @@ void flash_print_info  (flash_info_t *info)
  * The following code cannot be run from FLASH!
  */
 
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
 {
 	FPW value;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW)0x00AA00AA;
-	addr[0x2AAA] = (FPW)0x00550055;
-	addr[0x5555] = (FPW)0x00900090;
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
 
 	value = addr[0];
 
-   switch (value) {
-   case (FPW)INTEL_MANUFACT:
-      info->flash_id = FLASH_MAN_INTEL;
-      break;
+	debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
+
+	switch (value) {
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
-		addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
-		return (0);			/* no or unknown flash	*/
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);			/* no or unknown flash  */
 	}
 
-	value = addr[1];			/* device ID		*/
+	value = addr[1];			/* device ID        */
+
+	debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
 
-   switch (value) {
-   case (FPW)INTEL_ID_28F320J3A:
-      info->flash_id += FLASH_28F320J3A;
-      info->sector_count = 32;
-      info->size = 0x00400000;
-      break;            /* => 4 MB     */
+	switch (value) {
+	case (FPW) INTEL_ID_28F320J3A:
+		info->flash_id += FLASH_28F320J3A;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		break;				/* => 4 MB     */
 
-   case (FPW)INTEL_ID_28F640J3A:
-      info->flash_id += FLASH_28F640J3A;
-      info->sector_count = 64;
-      info->size = 0x00800000;
-      break;            /* => 8 MB     */
+	case (FPW) INTEL_ID_28F640J3A:
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		break;				/* => 8 MB     */
 
-   case (FPW)INTEL_ID_28F128J3A:
-      info->flash_id += FLASH_28F128J3A;
-      info->sector_count = 128;
-      info->size = 0x01000000;
-      break;            /* => 16 MB     */
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x01000000;
+		break;				/* => 16 MB     */
 
 	default:
 		info->flash_id = FLASH_UNKNOWN;
@@ -243,11 +257,11 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 
 	if (info->sector_count > CFG_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
+				info->sector_count, CFG_MAX_FLASH_SECT);
 		info->sector_count = CFG_MAX_FLASH_SECT;
 	}
 
-	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
 
 	return (info->size);
 }
@@ -256,7 +270,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 /*-----------------------------------------------------------------------
  */
 
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
 	int flag, prot, sect;
 	ulong type, start, now, last;
@@ -279,7 +293,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	}
 
 	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
+	for (sect = s_first; sect <= s_last; ++sect) {
 		if (info->protect[sect]) {
 			prot++;
 		}
@@ -293,44 +307,44 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	}
 
 	start = get_timer (0);
-	last  = start;
+	last = start;
 	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
+	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *)(info->start[sect]);
+			FPWV *addr = (FPWV *) (info->start[sect]);
 			FPW status;
 
 			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
+			flag = disable_interrupts ();
 
-			*addr = (FPW)0x00500050;	/* clear status register */
-			*addr = (FPW)0x00200020;	/* erase setup */
-			*addr = (FPW)0x00D000D0;	/* erase confirm */
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			/* re-enable interrupts if necessary */
 			if (flag)
-				enable_interrupts();
+				enable_interrupts ();
 
 			/* wait at least 80us - let's wait 1 ms */
 			udelay (1000);
 
-			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = (FPW)0x00B000B0; /* suspend erase	  */
-					*addr = (FPW)0x00FF00FF; /* reset to read mode */
-					rcode = 1;
-					break;
-				}
-
-				/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
+			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+				printf ("Timeout\n");
+				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
+				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
+				rcode = 1;
+				break;
+			    }
+
+			    /* show that we're waiting */
+			    if ((now - last) > 1000) {	/* every second */
+				putc ('.');
+				last = now;
+			    }
 			}
 
-			*addr = (FPW)0x00FF00FF;	/* reset to read mode */
+			*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
 		}
 	}
 	printf (" done\n");
@@ -345,15 +359,12 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
  * 4 - Flash not identified
  */
 
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	ulong cp, wp;
 	FPW data;
-#if 0
-	int count, i, l, rc, port_width;
-#else
+
 	int i, l, rc, port_width;
-#endif
 
 	if (info->flash_id == FLASH_UNKNOWN) {
 		return 4;
@@ -372,19 +383,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 */
 	if ((l = addr - wp) != 0) {
 		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
 		}
-		for (; i<port_width && cnt>0; ++i) {
+		for (; i < port_width && cnt > 0; ++i) {
 			data = (data << 8) | *src++;
 			--cnt;
 			++cp;
 		}
-		for (; cnt==0 && i<port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
 		}
 
-		if ((rc = write_data(info, wp, data)) != 0) {
+		if ((rc = write_data (info, wp, data)) != 0) {
 			return (rc);
 		}
 		wp += port_width;
@@ -393,26 +404,16 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	/*
 	 * handle word aligned part
 	 */
-#if 0
-	count = 0;
-#endif
 	while (cnt >= port_width) {
 		data = 0;
-		for (i=0; i<port_width; ++i) {
+		for (i = 0; i < port_width; ++i) {
 			data = (data << 8) | *src++;
 		}
-		if ((rc = write_data(info, wp, data)) != 0) {
+		if ((rc = write_data (info, wp, data)) != 0) {
 			return (rc);
 		}
-		wp  += port_width;
+		wp += port_width;
 		cnt -= port_width;
-#if 0
-		if (count++ > 0x20000)
-		{
-			putc('.');
-			count = 0;
-		}
-#endif
 	}
 
 	if (cnt == 0) {
@@ -423,15 +424,15 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 * handle unaligned tail bytes
 	 */
 	data = 0;
-	for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
 		data = (data << 8) | *src++;
 		--cnt;
 	}
-	for (; i<port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
 	}
 
-	return (write_data(info, wp, data));
+	return (write_data (info, wp, data));
 }
 
 /*-----------------------------------------------------------------------
@@ -440,39 +441,38 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
+static int write_data (flash_info_t * info, ulong dest, FPW data)
 {
-	FPWV *addr = (FPWV *)dest;
+	FPWV *addr = (FPWV *) dest;
 	ulong status;
 	ulong start;
 	int flag;
 
 	/* Check if Flash is (sufficiently) erased */
 	if ((*addr & data) != data) {
-		printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
+	flag = disable_interrupts ();
 
-	*addr = (FPW)0x00400040;		/* write setup */
+	*addr = (FPW) 0x00400040;	/* write setup */
 	*addr = data;
 
 	/* re-enable interrupts if necessary */
 	if (flag)
-		enable_interrupts();
+		enable_interrupts ();
 
 	start = get_timer (0);
 
-	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*addr = (FPW)0x00FF00FF;	/* restore read mode */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
 	}
 
-	*addr = (FPW)0x00FF00FF;	/* restore read mode */
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 
 	return (0);
 }
-