* Patch by Ronen Shitrit, 10 Dec 2003:

  Add support for the Marvell DB64360 / DB64460 development boards

* Patch by Detlev Zundel, 10 Dec 2003:
  fix dependency problem in examples/Makefile

46 files changed, 28617 insertions, 116 deletions

diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt
new file mode 100644
index 0000000000..648c2ff791
--- /dev/null
+++ b/board/Marvell/common/bootseq.txt
@@ -0,0 +1,94 @@
+(cpu/mpc7xxx/start.S)
+
+start:
+    b boot_cold
+
+start_warm:
+    b boot_warm
+
+
+boot_cold:
+boot_warm:
+    clear bats
+    init l2 (if enabled)
+    init altivec (if enabled)
+    invalidate l2 (if enabled)
+    setup bats (from defines in config_EVB)
+    enable_addr_trans: (if MMU enabled)
+	enable MSR_IR and MSR_DR
+    jump to in_flash
+
+in_flash:
+    enable l1 dcache
+    gal_low_init: (board/evb64260/sdram_init.S)
+	config SDRAM (CFG, TIMING, DECODE)
+	init scratch regs (810 + 814)
+
+	detect DIMM0 (bank 0 only)
+	config SDRAM_PARA0 to 256/512Mbit
+	bl sdram_op_mode
+	detect bank0 width
+	    write scratch reg 810
+	config SDRAM_PARA0 with results
+	config SDRAM_PARA1 with results
+
+	detect DIMM1 (bank 2 only)
+	config SDRAM_PARA2 to 256/512Mbit
+	detect bank2 width
+	    write scratch reg 814
+	config SDRAM_PARA2 with results
+	config SDRAM_PARA3 with results
+
+	setup device bus timings/width
+	setup boot device timings/width
+
+	setup CPU_CONF (0x0)
+	setup cpu master control register 0x160
+	setup PCI0 TIMEOUT
+	setup PCI1 TIMEOUT
+	setup PCI0 BAR
+	setup PCI1 BAR
+
+	setup MPP control 0-3
+	setup GPP level control
+	setup Serial ports multiplex
+
+    setup stack pointer (r1)
+    setup GOT
+    call cpu_init_f
+    	debug leds
+    board_init_f: (common/board.c)
+	board_pre_init:
+	    remap gt regs?
+	    map PCI mem/io
+	    map device space
+	    clear out interupts
+	init_timebase
+	env_init
+	serial_init
+	console_init_f
+	display_options
+	initdram: (board/evb64260/evb64260.c)
+	    detect memory
+	    for each bank:
+		dram_size()
+		setup PCI slave memory mappings
+		setup SCS
+   	setup monitor
+	alloc board info struct
+	init bd struct
+	relocate_code: (cpu/mpc7xxx/start.S)
+	    copy,got,clearbss
+	    board_init_r(bd, dest_addr) (common/board.c)
+		setup bd function pointers
+		trap_init
+		flash_init: (board/evb64260/flash.c)
+		setup bd flash info
+		cpu_init_r: (cpu/mpc7xxx/cpu_init.c)
+		    nothing
+		mem_malloc_init
+		malloc_bin_reloc
+		spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+		env_relocated
+		misc_init_r(bd): (board/evb64260/evb64260.c)
+		    mpsc_init2
diff --git a/board/Marvell/common/ecctest.c b/board/Marvell/common/ecctest.c
new file mode 100644
index 0000000000..6247b45c29
--- /dev/null
+++ b/board/Marvell/common/ecctest.c
@@ -0,0 +1,133 @@
+indent: Standard input:49: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
+
+/*
+ * (C) Copyright 2001
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef ECC_TEST
+static inline void ecc_off (void)
+{
+	*(volatile int *) (INTERNAL_REG_BASE_ADDR + 0x4b4) &= ~0x00200000;
+}
+
+static inline void ecc_on (void)
+{
+	*(volatile int *) (INTERNAL_REG_BASE_ADDR + 0x4b4) |= 0x00200000;
+}
+
+static int putshex (const char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		printf ("%02x", buf[i]);
+	}
+	return 0;
+}
+
+static int char_memcpy (void *d, const void *s, int len)
+{
+	int i;
+	char *cd = d;
+	const char *cs = s;
+
+	for (i = 0; i < len; i++) {
+		*(cd++) = *(cs++);
+	}
+	return 0;
+}
+
+static int memory_test (char *buf)
+{
+	const char src[][16] = {
+		{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+		{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+		 0x01, 0x01, 0x01, 0x01, 0x01, 0x01},
+		{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+		 0x02, 0x02, 0x02, 0x02, 0x02, 0x02},
+		{0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+		 0x04, 0x04, 0x04, 0x04, 0x04, 0x04},
+		{0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+		 0x08, 0x08, 0x08, 0x08, 0x08, 0x08},
+		{0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+		 0x10, 0x10, 0x10, 0x10, 0x10, 0x10},
+		{0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+		 0x20, 0x20, 0x20, 0x20, 0x20, 0x20},
+		{0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
+		 0x40, 0x40, 0x40, 0x40, 0x40, 0x40},
+		{0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+		 0x80, 0x80, 0x80, 0x80, 0x80, 0x80},
+		{0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
+		 0x55, 0x55, 0x55, 0x55, 0x55, 0x55},
+		{0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+		 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa},
+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+		 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}
+	};
+	const int foo[] = { 0 };
+	int i, j, a;
+
+	printf ("\ntest @ %d %p\n", foo[0], buf);
+	for (i = 0; i < 12; i++) {
+		for (a = 0; a < 8; a++) {
+			const char *s = src[i] + a;
+			int align = (unsigned) (s) & 0x7;
+
+			/* ecc_off(); */
+			memcpy (buf, s, 8);
+			/* ecc_on(); */
+			putshex (s, 8);
+			if (memcmp (buf, s, 8)) {
+				putc ('\n');
+				putshex (buf, 8);
+				printf (" [FAIL] (%p) align=%d\n", s, align);
+				for (j = 0; j < 8; j++) {
+					s[j] == buf[j] ? puts ("  ") :
+						printf ("%02x",
+							(s[j]) ^ (buf[j]));
+				}
+				putc ('\n');
+			} else {
+				printf (" [PASS] (%p) align=%d\n", s, align);
+			}
+			/* ecc_off(); */
+			char_memcpy (buf, s, 8);
+			/* ecc_on(); */
+			putshex (s, 8);
+			if (memcmp (buf, s, 8)) {
+				putc ('\n');
+				putshex (buf, 8);
+				printf (" [FAIL] (%p) align=%d\n", s, align);
+				for (j = 0; j < 8; j++) {
+					s[j] == buf[j] ? puts ("  ") :
+						printf ("%02x",
+							(s[j]) ^ (buf[j]));
+				}
+				putc ('\n');
+			} else {
+				printf (" [PASS] (%p) align=%d\n", s, align);
+			}
+		}
+	}
+
+	return 0;
+}
+#endif
diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
new file mode 100644
index 0000000000..c2c5b76594
--- /dev/null
+++ b/board/Marvell/common/flash.c
@@ -0,0 +1,1072 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * flash.c - flash support for the 512k, 8bit boot flash
+ 	and the 8MB 32bit extra flash on the DB64360
+ *           most of this file was based on the existing U-Boot
+ *           flash drivers.
+ *
+ * written or collected and sometimes rewritten by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../include/mv_gen_reg.h"
+#include "../include/memory.h"
+#include "intel_flash.h"
+
+#define FLASH_ROM       0xFFFD	/* unknown flash type                   */
+#define FLASH_RAM       0xFFFE	/* unknown flash type                   */
+#define FLASH_MAN_UNKNOWN 0xFFFF0000
+
+/* #define DEBUG */
+
+/* Intel flash commands */
+int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
+int write_word_intel (bank_addr_t addr, bank_word_t value);
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (int portwidth, vu_long * addr,
+			     flash_info_t * info);
+static int write_word (flash_info_t * info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned int i;
+	unsigned long size_b0 = 0, size_b1 = 0;
+	unsigned long base, flash_size;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* the boot flash */
+	base = CFG_FLASH_BASE;
+	size_b0 =
+		flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+				&flash_info[0]);
+
+	printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
+	}
+
+	base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+/*	base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
+	for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+		unsigned long size =
+			flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+					(vu_long *) base, &flash_info[i]);
+
+		printf ("[%ldMB@%lx] ", size >> 20, base);
+
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			if (i == 1) {
+				printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b1, size_b1 << 20);
+			}
+			break;
+		}
+		size_b1 += size;
+		base += size;
+	}
+
+	flash_size = size_b0 + size_b1;
+	return flash_size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+	int sector_size;
+
+	if (!info->sector_count)
+		return;
+
+	/* set up sector start address table */
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+	case FLASH_28F128J3A:
+	case FLASH_28F640J3A:
+	case FLASH_RAM:
+		/* this chip has uniformly spaced sectors */
+		sector_size = info->size / info->sector_count;
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * sector_size);
+		break;
+	default:
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type    */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00008000;
+			info->start[2] = base + 0x0000C000;
+			info->start[3] = base + 0x00010000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+					base + (i * 0x00020000) - 0x00060000;
+			}
+		} else {
+			/* set sector offsets for top boot block type               */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00008000;
+			info->start[i--] = base + info->size - 0x0000C000;
+			info->start[i--] = base + info->size - 0x00010000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00020000;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_STM:
+		printf ("STM ");
+		break;
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("FUJITSU ");
+		break;
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+		printf ("AM29LV040B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400B:
+		printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM160B:
+		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_28F640J3A:
+		printf ("28F640J3A (64 Mbit)\n");
+		break;
+	case FLASH_28F128J3A:
+		printf ("28F128J3A (128 Mbit)\n");
+		break;
+	case FLASH_ROM:
+		printf ("ROM\n");
+		break;
+	case FLASH_RAM:
+		printf ("RAM\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	if ((info->size >> 20) > 0) {
+		printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+	} else {
+		printf ("  Size: %ld kB in %d Sectors\n",
+			info->size >> 10, info->sector_count);
+	}
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static inline void flash_cmd (int width, volatile unsigned char *addr,
+			      int offset, unsigned char cmd)
+{
+	/* supports 1x8, 1x16, and 2x16 */
+	/* 2x8 and 4x8 are not supported */
+	if (width == 4) {
+		/* assuming chips are in 16 bit mode */
+		/* 2x16 */
+		unsigned long cmd32 = (cmd << 16) | cmd;
+
+		*(volatile unsigned long *) (addr + offset * 2) = cmd32;
+	} else {
+		/* 1x16 or 1x8 */
+		*(volatile unsigned char *) (addr + offset) = cmd;
+	}
+}
+
+static ulong
+flash_get_size (int portwidth, vu_long * addr, flash_info_t * info)
+{
+	short i;
+	volatile unsigned char *caddr = (unsigned char *) addr;
+	volatile unsigned short *saddr = (unsigned short *) addr;
+	volatile unsigned long *laddr = (unsigned long *) addr;
+	char old[2], save;
+	ulong id = 0, manu = 0, base = (ulong) addr;
+
+#ifdef DEBUG
+	printf ("%s: enter\n", __FUNCTION__);
+#endif
+	info->portwidth = portwidth;
+
+	save = *caddr;
+
+	flash_cmd (portwidth, caddr, 0, 0xf0);
+	flash_cmd (portwidth, caddr, 0, 0xf0);
+
+	udelay (10);
+
+	old[0] = caddr[0];
+	old[1] = caddr[1];
+
+
+	if (old[0] != 0xf0) {
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		udelay (10);
+
+		if (*caddr == 0xf0) {
+			/* this area is ROM */
+			*caddr = save;
+			info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
+			info->sector_count = 8;
+			info->size = 0x80000;
+			flash_get_offsets (base, info);
+			return info->size;
+		}
+	} else {
+		*caddr = 0;
+
+		udelay (10);
+
+		if (*caddr == 0) {
+			/* this area is RAM */
+			*caddr = save;
+			info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN;
+			info->sector_count = 8;
+			info->size = 0x80000;
+			flash_get_offsets (base, info);
+			return info->size;
+		}
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		udelay (10);
+	}
+
+	/* Write auto select command: read Manufacturer ID */
+	flash_cmd (portwidth, caddr, 0x555, 0xAA);
+	flash_cmd (portwidth, caddr, 0x2AA, 0x55);
+	flash_cmd (portwidth, caddr, 0x555, 0x90);
+
+	udelay (10);
+
+	if ((caddr[0] == old[0]) && (caddr[1] == old[1])) {
+
+		/* this area is ROM */
+		info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
+		info->sector_count = 8;
+		info->size = 0x80000;
+		flash_get_offsets (base, info);
+		return info->size;
+#ifdef DEBUG
+	} else {
+		printf ("%px%d: %02x:%02x -> %02x:%02x\n",
+			caddr, portwidth, old[0], old[1], caddr[0], caddr[1]);
+#endif
+	}
+
+	switch (portwidth) {
+	case 1:
+		manu = caddr[0];
+		manu |= manu << 16;
+		id = caddr[1];
+		break;
+	case 2:
+		manu = saddr[0];
+		manu |= manu << 16;
+		id = saddr[1];
+		id |= id << 16;
+		break;
+	case 4:
+		manu = laddr[0];
+		id = laddr[1];
+		break;
+	}
+
+#ifdef DEBUG
+	flash_cmd (portwidth, caddr, 0, 0xf0);
+
+	printf ("\n%08lx:%08lx:%08lx\n", base, manu, id);
+	printf ("%08lx %08lx %08lx %08lx\n",
+		laddr[0], laddr[1], laddr[2], laddr[3]);
+#endif
+
+	switch (manu) {
+	case STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		printf ("Unknown Mfr [%08lx]:%08lx\n", manu, id);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+	switch (id) {
+	case AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		info->chipwidth = 1;
+		break;		/* => 1 MB      */
+
+	case AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		info->chipwidth = 1;
+		break;		/* => 1 MB      */
+
+	case AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		info->chipwidth = 1;
+		break;		/* => 2 MB      */
+
+	case AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		info->chipwidth = 1;
+		break;		/* => 2 MB      */
+
+	case AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		info->chipwidth = 1;
+		break;		/* => 4 MB      */
+
+	case AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		info->chipwidth = 1;
+		break;		/* => 4 MB      */
+#if 0				/* enable when device IDs are available */
+	case AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;		/* => 8 MB      */
+
+	case AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;		/* => 8 MB      */
+#endif
+	case AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x80000;
+		info->chipwidth = 1;
+		break;		/* => 512 kB    */
+
+	case INTEL_ID_28F640J3A:
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 128 * 1024 * 64;	/* 128kbytes x 64 blocks */
+		info->chipwidth = 2;
+		if (portwidth == 4)
+			info->size *= 2;	/* 2x16 */
+		break;
+
+	case INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 128 * 1024 * 128;	/* 128kbytes x 128 blocks */
+		info->chipwidth = 2;
+		if (portwidth == 4)
+			info->size *= 2;	/* 2x16 */
+		break;
+
+	default:
+		flash_cmd (portwidth, caddr, 0, 0xf0);
+
+		printf ("Unknown id %lx:[%lx]\n", manu, id);
+		info->flash_id = FLASH_UNKNOWN;
+		info->chipwidth = 1;
+		return (0);	/* => no or unknown flash */
+
+	}
+
+	flash_get_offsets (base, info);
+
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0)=0x02 */
+		/* D0 = 1 if protected */
+		caddr = (volatile unsigned char *) (info->start[i]);
+		saddr = (volatile unsigned short *) (info->start[i]);
+		laddr = (volatile unsigned long *) (info->start[i]);
+		if (portwidth == 1)
+			info->protect[i] = caddr[2] & 1;
+		else if (portwidth == 2)
+			info->protect[i] = saddr[2] & 1;
+		else
+			info->protect[i] = laddr[2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		caddr = (volatile unsigned char *) info->start[0];
+
+		flash_cmd (portwidth, caddr, 0, 0xF0);	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	volatile unsigned char *addr = (char *) (info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+/* modified to support 2x16 Intel flash */
+/* Note that the code will not exit on a flash erasure error or timeout */
+/* but will print and error message and continue processing sectors */
+/* until they are all erased. */
+/* 10-16-2002 P. Marchese */
+	ulong mask;
+	int timeout;
+
+	if (info->portwidth == 4)
+/*		{
+		printf ("- Warning: erasing of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
+		return 1;
+		}*/
+	{
+		/* make sure it's Intel flash */
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+			/* yup! it's an Intel flash */
+			/* is it 16-bits wide? */
+			if (info->chipwidth == 2) {
+				/* yup! it's 16-bits wide */
+				/* are there any sectors to process? */
+				if ((s_first < 0) || (s_first > s_last)) {
+					printf ("Error:  There are no sectors to erase\n");
+					printf ("Either sector %d is less than zero\n", s_first);
+					printf ("or sector %d is greater than sector %d\n", s_first, s_last);
+					return 1;
+				}
+				/* check for protected sectors */
+				prot = 0;
+				for (sect = s_first; sect <= s_last; ++sect)
+					if (info->protect[sect])
+						prot++;
+				/* if variable "prot" is nonzero, there are protected sectors */
+				if (prot)
+					printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+				/* reset the flash */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* Disable interrupts which might cause a timeout here */
+				flag = disable_interrupts ();
+				/* Clear the status register */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_CLR_STAT);
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* Start erase on unprotected sectors */
+				for (sect = s_first; sect <= s_last; sect++) {
+					/* is the sector unprotected? */
+					if (info->protect[sect] == 0) {	/* not protected */
+						/* issue the single block erase command, 0x20 */
+						flash_cmd (info->portwidth,
+							   (volatile unsigned
+							    char *) info->
+							   start[sect], 0,
+							   CHIP_CMD_ERASE1);
+						/* issue the erase confirm command, 0xD0 */
+						flash_cmd (info->portwidth,
+							   (volatile unsigned
+							    char *) info->
+							   start[sect], 0,
+							   CHIP_CMD_ERASE2);
+						l_sect = sect;
+						/* re-enable interrupts if necessary */
+						if (flag)
+							enable_interrupts ();
+						/* poll for erasure completion */
+						/* put flash into read status mode by writing 0x70 to it */
+						flash_cmd (info->portwidth,
+							   addr, 0,
+							   CHIP_CMD_RD_STAT);
+						/* setup the status register mask */
+						mask = CHIP_STAT_RDY |
+							(CHIP_STAT_RDY << 16);
+						/* init. the timeout counter */
+						start = get_timer (0);
+						/* keep looping while the flash is not ready */
+						/* exit the loop by timing out or the flash */
+						/* becomes ready again */
+						timeout = 0;
+						while ((*
+							(volatile unsigned
+							 long *) info->
+							start[sect] & mask) !=
+						       mask) {
+							/* has the timeout limit been reached? */
+							if (get_timer (start)
+							    >
+							    CFG_FLASH_ERASE_TOUT)
+							{
+								/* timeout limit reached */
+								printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
+								printf ("Continuing with next sector\n");
+								timeout = 1;
+								goto timed_out_error;
+							}
+							/* put flash into read status mode by writing 0x70 to it */
+							flash_cmd (info->
+								   portwidth,
+								   addr, 0,
+								   CHIP_CMD_RD_STAT);
+						}
+						/* did we timeout? */
+					      timed_out_error:if (timeout == 0)
+						{
+							/* didn't timeout, so check the status register */
+							/* create the status mask to check for errors */
+							mask = CHIP_STAT_ECLBS;
+							mask = mask | (mask <<
+								       16);
+							/* put flash into read status mode by writing 0x70 to it */
+							flash_cmd (info->
+								   portwidth,
+								   addr, 0,
+								   CHIP_CMD_RD_STAT);
+							/* are there any errors? */
+							if ((*
+							     (volatile
+							      unsigned long *)
+							     info->
+							     start[sect] &
+							     mask) != 0) {
+								/* We got an erasure error */
+								printf ("Flash erasure error at address 0x%08lx\n", info->start[sect]);
+								printf ("Continuing with next sector\n");
+								/* reset the flash */
+								flash_cmd
+									(info->
+									 portwidth,
+									 addr,
+									 0,
+									 CHIP_CMD_RST);
+							}
+						}
+						/* erasure completed without errors */
+						/* reset the flash */
+						flash_cmd (info->portwidth,
+							   addr, 0,
+							   CHIP_CMD_RST);
+					}	/* end if not protected */
+				}	/* end for loop */
+				printf ("Flash erasure done\n");
+				return 0;
+			} else {
+				/* The Intel flash is not 16-bit wide */
+				/* print and error message and return */
+				/* NOTE: you can add routines here to handle other size flash */
+				printf ("Error: Intel flash device is only %d-bits wide\n", info->chipwidth * 8);
+				printf ("The erasure code only handles Intel 16-bit wide flash memory\n");
+				return 1;
+			}
+		} else {
+			/* Not Intel flash so return an error as a write timeout */
+			/* NOTE: if it's another type flash, stick its routine here */
+			printf ("Error: The flash device is not Intel type\n");
+			printf ("The erasure code only supports Intel flash in a 32-bit port width\n");
+			return 1;
+		}
+	}
+
+	/* end 32-bit wide flash code */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
+		return 1;	/* Rom can not be erased */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {	/* RAM just copy 0s to RAM */
+		for (sect = s_first; sect <= s_last; sect++) {
+			int sector_size = info->size / info->sector_count;
+
+			addr = (char *) (info->start[sect]);
+			memset ((void *) addr, 0, sector_size);
+		}
+		return 0;
+	}
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {	/* Intel works spezial */
+		return flash_erase_intel (info,
+					  (unsigned short) s_first,
+					  (unsigned short) s_last);
+	}
+#if 0
+	if ((info->flash_id == FLASH_UNKNOWN) ||	/* Flash is unknown to PPCBoot */
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+#endif
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	flash_cmd (info->portwidth, addr, 0x555, 0xAA);	/* start erase routine */
+	flash_cmd (info->portwidth, addr, 0x2AA, 0x55);
+	flash_cmd (info->portwidth, addr, 0x555, 0x80);
+	flash_cmd (info->portwidth, addr, 0x555, 0xAA);
+	flash_cmd (info->portwidth, addr, 0x2AA, 0x55);
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (char *) (info->start[sect]);
+			flash_cmd (info->portwidth, addr, 0, 0x30);
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last = start;
+	addr = (volatile unsigned char *) (info->start[l_sect]);
+	/* broken for 2x16: TODO */
+	while ((addr[0] & 0x80) != 0x80) {
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+      DONE:
+	/* reset to read mode */
+	addr = (volatile unsigned char *) info->start[0];
+	flash_cmd (info->portwidth, addr, 0, 0xf0);
+	flash_cmd (info->portwidth, addr, 0, 0xf0);
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+/* broken for 2x16: TODO */
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+/* Commented out since the below code should work for 32-bit(2x 16 flash) */
+/* 10-16-2002 P. Marchese */
+/*	if(info->portwidth==4) return 1; */
+/*	if(info->portwidth==4) {
+		printf ("- Warning: writting of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
+		return 1;
+		}*/
+
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
+		return 0;
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
+		memcpy ((void *) addr, src, cnt);
+		return 0;
+	}
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word (info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+/* broken for 2x16: TODO */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile unsigned char *addr = (char *) (info->start[0]);
+	ulong start;
+	int flag, i;
+	ulong mask;
+
+/* modified so that it handles 32-bit(2x16 Intel flash programming */
+/* 10-16-2002 P. Marchese */
+
+	if (info->portwidth == 4)
+/*		{
+		printf ("- Warning: writting of 32Bit (2*16Bit i.e. 2*28F640J3A) not supported yet !!!! \n");
+		return 1;
+		}*/
+	{
+		/* make sure it's Intel flash */
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+			/* yup! it's an Intel flash */
+			/* is it 16-bits wide? */
+			if (info->chipwidth == 2) {
+				/* yup! it's 16-bits wide */
+				/* so we know how to program it */
+				/* reset the flash */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* Disable interrupts which might cause a timeout here */
+				flag = disable_interrupts ();
+				/* Clear the status register */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_CLR_STAT);
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				/* 1st cycle of word/byte program */
+				/* write 0x40 to the location to program */
+				flash_cmd (info->portwidth, (char *) dest, 0,
+					   CHIP_CMD_PROG);
+				/* 2nd cycle of word/byte program */
+				/* write the data to the destination address */
+				*(ulong *) dest = data;
+				/* re-enable interrupts if necessary */
+				if (flag)
+					enable_interrupts ();
+				/* setup the status register mask */
+				mask = CHIP_STAT_RDY | (CHIP_STAT_RDY << 16);
+				/* put flash into read status mode by writing 0x70 to it */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RD_STAT);
+				/* init. the timeout counter */
+				start = get_timer (0);
+				/* keep looping while the flash is not ready */
+				/* exit the loop by timing out or the flash */
+				/* becomes ready again */
+/* 11-13-2002 Paul Marchese */
+/* modified while loop conditional statement */
+/* because we were always timing out.  */
+/* there is a type mismatch, "addr[0]" */
+/* returns a byte but "mask" is a 32-bit value */
+				while ((*(volatile unsigned long *) info->
+					start[0] & mask) != mask)
+/* original code */
+/* while (addr[0] & mask) != mask) */
+				{
+					/* has the timeout limit been reached? */
+					if (get_timer (start) >
+					    CFG_FLASH_WRITE_TOUT) {
+						/* timeout limit reached */
+						printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
+						/* reset the flash */
+						flash_cmd (info->portwidth,
+							   addr, 0,
+							   CHIP_CMD_RST);
+						return (1);
+					}
+					/* put flash into read status mode by writing 0x70 to it */
+					flash_cmd (info->portwidth, addr, 0,
+						   CHIP_CMD_RD_STAT);
+				}
+				/* flash is ready, so check the status */
+				/* create the status mask to check for errors */
+				mask = CHIP_STAT_DPS | CHIP_STAT_VPPS |
+					CHIP_STAT_PSLBS;
+				mask = mask | (mask << 16);
+				/* put flash into read status mode by writing 0x70 to it */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RD_STAT);
+				/* are there any errors? */
+				if ((addr[0] & mask) != 0) {
+					/* We got a one of the following errors: */
+					/* Voltage range, Device protect, or programming */
+					/* return the error as a device timeout */
+					/* put flash into read status mode by writing 0x70 to it */
+					flash_cmd (info->portwidth, addr, 0,
+						   CHIP_CMD_RD_STAT);
+					printf ("Flash programming error at address 0x%08lx\n", dest);
+					printf ("Flash status register contains 0x%08lx\n", (unsigned long) addr[0]);
+					/* reset the flash */
+					flash_cmd (info->portwidth, addr, 0,
+						   CHIP_CMD_RST);
+					return 1;
+				}
+				/* write completed without errors */
+				/* reset the flash */
+				flash_cmd (info->portwidth, addr, 0,
+					   CHIP_CMD_RST);
+				return 0;
+			} else {
+				/* it's not 16-bits wide, so return an error as a write timeout */
+				/* NOTE: you can add routines here to handle other size flash */
+				printf ("Error: Intel flash device is only %d-bits wide\n", info->chipwidth * 8);
+				printf ("The write code only handles Intel 16-bit wide flash memory\n");
+				return 1;
+			}
+		} else {
+			/* not Intel flash so return an error as a write timeout */
+			/* NOTE: if it's another type flash, stick its routine here */
+			printf ("Error: The flash device is not Intel type\n");
+			printf ("The code only supports Intel flash in a 32-bit port width\n");
+			return 1;
+		}
+	}
+
+	/* end of 32-bit flash code */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM)
+		return 1;
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
+		*(unsigned long *) dest = data;
+		return 0;
+	}
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		unsigned short low = data & 0xffff;
+		unsigned short hi = (data >> 16) & 0xffff;
+		int ret = write_word_intel ((bank_addr_t) dest, hi);
+
+		if (!ret)
+			ret = write_word_intel ((bank_addr_t) (dest + 2),
+						low);
+
+		return ret;
+	}
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *) dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* first, perform an unlock bypass command to speed up flash writes */
+	addr[0x555] = 0xAA;
+	addr[0x2AA] = 0x55;
+	addr[0x555] = 0x20;
+
+	/* write each byte out */
+	for (i = 0; i < 4; i++) {
+		char *data_ch = (char *) &data;
+
+		addr[0] = 0xA0;
+		*(((char *) dest) + i) = data_ch[i];
+		udelay (10);	/* XXX */
+	}
+
+	/* we're done, now do an unlock bypass reset */
+	addr[0] = 0x90;
+	addr[0] = 0x00;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
new file mode 100644
index 0000000000..624ee5cfbc
--- /dev/null
+++ b/board/Marvell/common/i2c.c
@@ -0,0 +1,532 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the DB64360 board by Ingo.Assmus@keymile.com
+ * extra improvments by Brain Waite
+ */
+#include <common.h>
+#include <mpc8xx.h>
+#include <malloc.h>
+#include "../include/mv_gen_reg.h"
+#include "../include/core.h"
+
+#define MAX_I2C_RETRYS	    10
+#define I2C_DELAY	    1000	/* Should be at least the # of MHz of Tclk */
+#undef	DEBUG_I2C
+/*#define DEBUG_I2C*/
+
+#ifdef DEBUG_I2C
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+/* Assuming that there is only one master on the bus (us) */
+
+static void i2c_init (int speed, int slaveaddr)
+{
+	unsigned int n, m, freq, margin, power;
+	unsigned int actualN = 0, actualM = 0;
+	unsigned int control, status;
+	unsigned int minMargin = 0xffffffff;
+	unsigned int tclk = CFG_TCLK;
+	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */
+
+	DP (puts ("i2c_init\n"));
+/* gtI2cMasterInit */
+	for (n = 0; n < 8; n++) {
+		for (m = 0; m < 16; m++) {
+			power = 2 << n;	/* power = 2^(n+1) */
+			freq = tclk / (10 * (m + 1) * power);
+			if (i2cFreq > freq)
+				margin = i2cFreq - freq;
+			else
+				margin = freq - i2cFreq;
+			if (margin < minMargin) {
+				minMargin = margin;
+				actualN = n;
+				actualM = m;
+			}
+		}
+	}
+
+	DP (puts ("setup i2c bus\n"));
+
+	/* Setup bus */
+/* gtI2cReset */
+	GT_REG_WRITE (I2C_SOFT_RESET, 0);
+
+	DP (puts ("udelay...\n"));
+
+	udelay (I2C_DELAY);
+
+	DP (puts ("set baudrate\n"));
+
+	GT_REG_WRITE (I2C_STATUS_BAUDE_RATE, (actualM << 3) | actualN);
+	GT_REG_WRITE (I2C_CONTROL, (0x1 << 2) | (0x1 << 6));
+
+	udelay (I2C_DELAY * 10);
+
+	DP (puts ("read control, baudrate\n"));
+
+	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+	GT_REG_READ (I2C_CONTROL, &control);
+}
+
+static uchar i2c_start (void)
+{				/* DB64360 checked -> ok */
+	unsigned int control, status;
+	int count = 0;
+
+	DP (puts ("i2c_start\n"));
+
+	/* Set the start bit */
+
+/* gtI2cGenerateStartBit() */
+
+	GT_REG_READ (I2C_CONTROL, &control);
+	control |= (0x1 << 5);	/* generate the I2C_START_BIT */
+	GT_REG_WRITE (I2C_CONTROL, control);
+
+	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+
+	count = 0;
+	while ((status & 0xff) != 0x08) {
+		udelay (I2C_DELAY);
+		if (count > 20) {
+			GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
+			return (status);
+		}
+		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+		count++;
+	}
+
+	return (0);
+}
+
+static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit)
+{
+	unsigned int status, data, bits = 7;
+	int count = 0;
+
+	DP (puts ("i2c_select_device\n"));
+
+	/* Output slave address */
+
+	if (ten_bit) {
+		bits = 10;
+	}
+
+	data = (dev_addr << 1);
+	/* set the read bit */
+	data |= read;
+	GT_REG_WRITE (I2C_DATA, data);
+	/* assert the address */
+	RESET_REG_BITS (I2C_CONTROL, BIT3);
+
+	udelay (I2C_DELAY);
+
+	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+	count = 0;
+	while (((status & 0xff) != 0x40) && ((status & 0xff) != 0x18)) {
+		udelay (I2C_DELAY);
+		if (count > 20) {
+			GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
+			return (status);
+		}
+		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+		count++;
+	}
+
+	if (bits == 10) {
+		printf ("10 bit I2C addressing not yet implemented\n");
+		return (0xff);
+	}
+
+	return (0);
+}
+
+static uchar i2c_get_data (uchar * return_data, int len)
+{
+
+	unsigned int data, status;
+	int count = 0;
+
+	DP (puts ("i2c_get_data\n"));
+
+	while (len) {
+
+		/* Get and return the data */
+
+		RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
+
+		udelay (I2C_DELAY * 5);
+
+		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+		count++;
+		while ((status & 0xff) != 0x50) {
+			udelay (I2C_DELAY);
+			if (count > 2) {
+				GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
+				return 0;
+			}
+			GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+			count++;
+		}
+		GT_REG_READ (I2C_DATA, &data);
+		len--;
+		*return_data = (uchar) data;
+		return_data++;
+	}
+	RESET_REG_BITS (I2C_CONTROL, BIT2 | BIT3);
+	while ((status & 0xff) != 0x58) {
+		udelay (I2C_DELAY);
+		if (count > 200) {
+			GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
+			return (status);
+		}
+		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+		count++;
+	}
+	GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/* stop */
+
+	return (0);
+}
+
+static uchar i2c_write_data (unsigned int *data, int len)
+{
+	unsigned int status;
+	int count = 0;
+	unsigned int temp;
+	unsigned int *temp_ptr = data;
+
+	DP (puts ("i2c_write_data\n"));
+
+	while (len) {
+		temp = (unsigned int) (*temp_ptr);
+		GT_REG_WRITE (I2C_DATA, temp);
+		RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
+
+		udelay (I2C_DELAY);
+
+		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+		count++;
+		while ((status & 0xff) != 0x28) {
+			udelay (I2C_DELAY);
+			if (count > 20) {
+				GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
+				return (status);
+			}
+			GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+			count++;
+		}
+		len--;
+		temp_ptr++;
+	}
+/* 11-14-2002 Paul Marchese */
+/* Can't have the write issuing a stop command */
+/* it's wrong to have a stop bit in read stream or write stream */
+/* since we don't know if it's really the end of the command */
+/* or whether we have just send the device address + offset */
+/* we will push issuing the stop command off to the original */
+/* calling function */
+	/* set the interrupt bit in the control register */
+	GT_REG_WRITE (I2C_CONTROL, (0x1 << 3));
+	udelay (I2C_DELAY * 10);
+	return (0);
+}
+
+/* 11-14-2002 Paul Marchese */
+/* created this function to get the i2c_write() */
+/* function working properly. */
+/* function to write bytes out on the i2c bus */
+/* this is identical to the function i2c_write_data() */
+/* except that it requires a buffer that is an */
+/* unsigned character array.  You can't use */
+/* i2c_write_data() to send an array of unsigned characters */
+/* since the byte of interest ends up on the wrong end of the bus */
+/* aah, the joys of big endian versus little endian! */
+/* */
+/* returns 0 = success */
+/*         anything other than zero is failure */
+static uchar i2c_write_byte (unsigned char *data, int len)
+{
+	unsigned int status;
+	int count = 0;
+	unsigned int temp;
+	unsigned char *temp_ptr = data;
+
+	DP (puts ("i2c_write_byte\n"));
+
+	while (len) {
+		/* Set and assert the data */
+		temp = *temp_ptr;
+		GT_REG_WRITE (I2C_DATA, temp);
+		RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
+
+		udelay (I2C_DELAY);
+
+		GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+		count++;
+		while ((status & 0xff) != 0x28) {
+			udelay (I2C_DELAY);
+			if (count > 20) {
+				GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));	/*stop */
+				return (status);
+			}
+			GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+			count++;
+		}
+		len--;
+		temp_ptr++;
+	}
+/* Can't have the write issuing a stop command */
+/* it's wrong to have a stop bit in read stream or write stream */
+/* since we don't know if it's really the end of the command */
+/* or whether we have just send the device address + offset */
+/* we will push issuing the stop command off to the original */
+/* calling function */
+/*	GT_REG_WRITE(I2C_CONTROL, (0x1 << 3) | (0x1 << 4));
+	GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); */
+	/* set the interrupt bit in the control register */
+	GT_REG_WRITE (I2C_CONTROL, (0x1 << 3));
+	udelay (I2C_DELAY * 10);
+
+	return (0);
+}
+
+static uchar
+i2c_set_dev_offset (uchar dev_addr, unsigned int offset, int ten_bit,
+		    int alen)
+{
+	uchar status;
+	unsigned int table[2];
+
+/* initialize the table of address offset bytes */
+/* utilized for 2 byte address offsets */
+/* NOTE: the order is high byte first! */
+	table[1] = offset & 0xff;	/* low byte */
+	table[0] = offset / 0x100;	/* high byte */
+
+	DP (puts ("i2c_set_dev_offset\n"));
+
+	status = i2c_select_device (dev_addr, 0, ten_bit);
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Failed to select device setting offset: 0x%02x\n",
+			status);
+#endif
+		return status;
+	}
+/* check the address offset length */
+	if (alen == 0)
+		/* no address offset */
+		return (0);
+	else if (alen == 1) {
+		/* 1 byte address offset */
+		status = i2c_write_data (&offset, 1);
+		if (status) {
+#ifdef DEBUG_I2C
+			printf ("Failed to write data: 0x%02x\n", status);
+#endif
+			return status;
+		}
+	} else if (alen == 2) {
+		/* 2 bytes address offset */
+		status = i2c_write_data (table, 2);
+		if (status) {
+#ifdef DEBUG_I2C
+			printf ("Failed to write data: 0x%02x\n", status);
+#endif
+			return status;
+		}
+	} else {
+		/* address offset unknown or not supported */
+		printf ("Address length offset %d is not supported\n", alen);
+		return 1;
+	}
+	return 0;		/* sucessful completion */
+}
+
+uchar
+i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
+	  int len)
+{
+	uchar status = 0;
+	unsigned int i2cFreq = CFG_I2C_SPEED;
+
+	DP (puts ("i2c_read\n"));
+
+	i2c_init (i2cFreq, 0);	/* set the i2c frequency */
+
+	status = i2c_start ();
+
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Transaction start failed: 0x%02x\n", status);
+#endif
+		return status;
+	}
+
+	status = i2c_set_dev_offset (dev_addr, offset, 0, alen);	/* send the slave address + offset */
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Failed to set slave address & offset: 0x%02x\n",
+			status);
+#endif
+		return status;
+	}
+
+	i2c_init (i2cFreq, 0);	/* set the i2c frequency again */
+
+	status = i2c_start ();
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Transaction restart failed: 0x%02x\n", status);
+#endif
+		return status;
+	}
+
+	status = i2c_select_device (dev_addr, 1, 0);	/* send the slave address */
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Address not acknowledged: 0x%02x\n", status);
+#endif
+		return status;
+	}
+
+	status = i2c_get_data (data, len);
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Data not recieved: 0x%02x\n", status);
+#endif
+		return status;
+	}
+
+	return 0;
+}
+
+/* 11-14-2002 Paul Marchese */
+/* Function to set the I2C stop bit */
+void i2c_stop (void)
+{
+	GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));
+}
+
+/* 11-14-2002 Paul Marchese */
+/* I2C write function */
+/* dev_addr = device address */
+/* offset = address offset */
+/* alen = length in bytes of the address offset */
+/* data = pointer to buffer to read data into */
+/* len = # of bytes to read */
+/* */
+/* returns 0 = succesful */
+/*         anything but zero is failure */
+uchar
+i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
+	   int len)
+{
+	uchar status = 0;
+	unsigned int i2cFreq = CFG_I2C_SPEED;
+
+	DP (puts ("i2c_write\n"));
+
+	i2c_init (i2cFreq, 0);	/* set the i2c frequency */
+
+	status = i2c_start ();	/* send a start bit */
+
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Transaction start failed: 0x%02x\n", status);
+#endif
+		return status;
+	}
+
+	status = i2c_set_dev_offset (dev_addr, offset, 0, alen);	/* send the slave address + offset */
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Failed to set slave address & offset: 0x%02x\n",
+			status);
+#endif
+		return status;
+	}
+
+
+	status = i2c_write_byte (data, len);	/* write the data */
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Data not written: 0x%02x\n", status);
+#endif
+		return status;
+	}
+	/* issue a stop bit */
+	i2c_stop ();
+	return 0;
+}
+
+/* 11-14-2002 Paul Marchese */
+/* function to determine if an I2C device is present */
+/* chip = device address of chip to check for */
+/* */
+/* returns 0 = sucessful, the device exists */
+/*         anything other than zero is failure, no device */
+int i2c_probe (uchar chip)
+{
+
+	/* We are just looking for an <ACK> back. */
+	/* To see if the device/chip is there */
+
+#ifdef DEBUG_I2C
+	unsigned int i2c_status;
+#endif
+	uchar status = 0;
+	unsigned int i2cFreq = CFG_I2C_SPEED;
+
+	DP (puts ("i2c_probe\n"));
+
+	i2c_init (i2cFreq, 0);	/* set the i2c frequency */
+
+	status = i2c_start ();	/* send a start bit */
+
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Transaction start failed: 0x%02x\n", status);
+#endif
+		return (int) status;
+	}
+
+	status = i2c_set_dev_offset (chip, 0, 0, 0);	/* send the slave address + no offset */
+	if (status) {
+#ifdef DEBUG_I2C
+		printf ("Failed to set slave address: 0x%02x\n", status);
+#endif
+		return (int) status;
+	}
+#ifdef DEBUG_I2C
+	GT_REG_READ (I2C_STATUS_BAUDE_RATE, &i2c_status);
+	printf ("address %#x returned %#x\n", chip, i2c_status);
+#endif
+	/* issue a stop bit */
+	i2c_stop ();
+	return 0;		/* successful completion */
+}
diff --git a/board/Marvell/common/i2c.h b/board/Marvell/common/i2c.h
new file mode 100644
index 0000000000..b669ff0031
--- /dev/null
+++ b/board/Marvell/common/i2c.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the DB64360 board by Ingo.Assmus@keymile.com
+ */
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+/* function declarations */
+uchar i2c_read(uchar, unsigned int, int, uchar*, int);
+
+#endif
diff --git a/board/Marvell/common/intel_flash.c b/board/Marvell/common/intel_flash.c
new file mode 100644
index 0000000000..d26f883ad3
--- /dev/null
+++ b/board/Marvell/common/intel_flash.c
@@ -0,0 +1,269 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../include/mv_gen_reg.h"
+#include "../include/memory.h"
+#include "intel_flash.h"
+
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET	0x01
+#define FLAG_PROTECT_CLEAR	0x02
+
+static void bank_reset (flash_info_t * info, int sect)
+{
+	bank_addr_t addrw, eaddrw;
+
+	addrw = (bank_addr_t) info->start[sect];
+	eaddrw = BANK_ADDR_NEXT_WORD (addrw);
+
+	while (addrw < eaddrw) {
+#ifdef FLASH_DEBUG
+		printf ("  writing reset cmd to addr 0x%08lx\n",
+			(unsigned long) addrw);
+#endif
+		*addrw = BANK_CMD_RST;
+		addrw++;
+	}
+}
+
+static void bank_erase_init (flash_info_t * info, int sect)
+{
+	bank_addr_t addrw, saddrw, eaddrw;
+	int flag;
+
+#ifdef FLASH_DEBUG
+	printf ("0x%08x BANK_CMD_PROG\n", BANK_CMD_PROG);
+	printf ("0x%08x BANK_CMD_ERASE1\n", BANK_CMD_ERASE1);
+	printf ("0x%08x BANK_CMD_ERASE2\n", BANK_CMD_ERASE2);
+	printf ("0x%08x BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT);
+	printf ("0x%08x BANK_CMD_RST\n", BANK_CMD_RST);
+	printf ("0x%08x BANK_STAT_RDY\n", BANK_STAT_RDY);
+	printf ("0x%08x BANK_STAT_ERR\n", BANK_STAT_ERR);
+#endif
+
+	saddrw = (bank_addr_t) info->start[sect];
+	eaddrw = BANK_ADDR_NEXT_WORD (saddrw);
+
+#ifdef FLASH_DEBUG
+	printf ("erasing sector %d, start addr = 0x%08lx "
+		"(bank next word addr = 0x%08lx)\n", sect,
+		(unsigned long) saddrw, (unsigned long) eaddrw);
+#endif
+
+	/* Disable intrs which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	for (addrw = saddrw; addrw < eaddrw; addrw++) {
+#ifdef FLASH_DEBUG
+		printf ("  writing erase cmd to addr 0x%08lx\n",
+			(unsigned long) addrw);
+#endif
+		*addrw = BANK_CMD_ERASE1;
+		*addrw = BANK_CMD_ERASE2;
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+}
+
+static int bank_erase_poll (flash_info_t * info, int sect)
+{
+	bank_addr_t addrw, saddrw, eaddrw;
+	int sectdone, haderr;
+
+	saddrw = (bank_addr_t) info->start[sect];
+	eaddrw = BANK_ADDR_NEXT_WORD (saddrw);
+
+	sectdone = 1;
+	haderr = 0;
+
+	for (addrw = saddrw; addrw < eaddrw; addrw++) {
+		bank_word_t stat = *addrw;
+
+#ifdef FLASH_DEBUG
+		printf ("  checking status at addr "
+			"0x%08x [0x%08x]\n", (unsigned long) addrw, stat);
+#endif
+		if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY)
+			sectdone = 0;
+		else if ((stat & BANK_STAT_ERR) != 0) {
+			printf (" failed on sector %d "
+				"(stat = 0x%08x) at "
+				"address 0x%p\n", sect, stat, addrw);
+			*addrw = BANK_CMD_CLR_STAT;
+			haderr = 1;
+		}
+	}
+
+	if (haderr)
+		return (-1);
+	else
+		return (sectdone);
+}
+
+int write_word_intel (bank_addr_t addr, bank_word_t value)
+{
+	bank_word_t stat;
+	ulong start;
+	int flag, retval;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	*addr = BANK_CMD_PROG;
+
+	*addr = value;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	retval = 0;
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	do {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			retval = 1;
+			goto done;
+		}
+		stat = *addr;
+	} while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
+
+	if ((stat & BANK_STAT_ERR) != 0) {
+		printf ("flash program failed (stat = 0x%08lx) "
+			"at address 0x%08lx\n", (ulong) stat, (ulong) addr);
+		*addr = BANK_CMD_CLR_STAT;
+		retval = 3;
+	}
+
+      done:
+	/* reset to read mode */
+	*addr = BANK_CMD_RST;
+
+	return (retval);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase_intel (flash_info_t * info, int s_first, int s_last)
+{
+	int prot, sect, haderr;
+	ulong start, now, last;
+
+#ifdef FLASH_DEBUG
+	printf ("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
+		"  Bank # %d: ", s_last - s_first + 1, s_first, s_last,
+		(info - flash_info) + 1);
+	flash_print_info (info);
+#endif
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sector%s will not be erased!\n", prot, (prot > 1 ? "s" : ""));
+	}
+
+	start = get_timer (0);
+	last = 0;
+	haderr = 0;
+
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			ulong estart;
+			int sectdone;
+
+			bank_erase_init (info, sect);
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+
+			estart = get_timer (start);
+
+			do {
+				now = get_timer (start);
+
+				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout (sect %d)\n", sect);
+					haderr = 1;
+					break;
+				}
+#ifndef FLASH_DEBUG
+				/* show that we're waiting */
+				if ((now - last) > 1000) {	/* every second */
+					putc ('.');
+					last = now;
+				}
+#endif
+
+				sectdone = bank_erase_poll (info, sect);
+
+				if (sectdone < 0) {
+					haderr = 1;
+					break;
+				}
+
+			} while (!sectdone);
+
+			if (haderr)
+				break;
+		}
+	}
+
+	if (haderr > 0)
+		printf (" failed\n");
+	else
+		printf (" done\n");
+
+	/* reset to read mode */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			bank_reset (info, sect);
+		}
+	}
+	return haderr;
+}
diff --git a/board/Marvell/common/intel_flash.h b/board/Marvell/common/intel_flash.h
new file mode 100644
index 0000000000..666a4cdcad
--- /dev/null
+++ b/board/Marvell/common/intel_flash.h
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ */
+
+/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
+
+/*
+ * acceptable chips types are:
+ *
+ *	28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
+ */
+
+/* register addresses, valid only following an CHIP_CMD_RD_ID command */
+#define CHIP_ADDR_REG_MAN	0x000000	/* manufacturer's id */
+#define CHIP_ADDR_REG_DEV	0x000001	/* device id */
+#define CHIP_ADDR_REG_CFGM	0x000003	/* master lock config */
+#define CHIP_ADDR_REG_CFG(b)	(((b)<<16)|2)	/* lock config for block b */
+
+/* Commands */
+#define CHIP_CMD_RST		0xFF		/* reset flash */
+#define CHIP_CMD_RD_ID		0x90		/* read the id and lock bits */
+#define CHIP_CMD_RD_QUERY	0x98		/* read device capabilities */
+#define CHIP_CMD_RD_STAT	0x70		/* read the status register */
+#define CHIP_CMD_CLR_STAT	0x50		/* clear the staus register */
+#define CHIP_CMD_WR_BUF		0xE8		/* clear the staus register */
+#define CHIP_CMD_PROG		0x40		/* program word command */
+#define CHIP_CMD_ERASE1		0x20		/* 1st word for block erase */
+#define CHIP_CMD_ERASE2		0xD0		/* 2nd word for block erase */
+#define CHIP_CMD_ERASE_SUSP	0xB0		/* suspend block erase */
+#define CHIP_CMD_LOCK		0x60		/* 1st word for all lock cmds */
+#define CHIP_CMD_SET_LOCK_BLK	0x01		/* 2nd wrd set block lock bit */
+#define CHIP_CMD_SET_LOCK_MSTR	0xF1		/* 2nd wrd set master lck bit */
+#define CHIP_CMD_CLR_LOCK_BLK	0xD0		/* 2nd wrd clear blk lck bit */
+
+/* status register bits */
+#define CHIP_STAT_DPS		0x02		/* Device Protect Status */
+#define CHIP_STAT_VPPS		0x08		/* VPP Status */
+#define CHIP_STAT_PSLBS		0x10		/* Program+Set Lock Bit Stat */
+#define CHIP_STAT_ECLBS		0x20		/* Erase+Clr Lock Bit Stat */
+#define CHIP_STAT_ESS		0x40		/* Erase Suspend Status */
+#define CHIP_STAT_RDY		0x80		/* WSM Mach Status, 1=rdy */
+
+#define CHIP_STAT_ERR		(CHIP_STAT_VPPS | CHIP_STAT_DPS | \
+				    CHIP_STAT_ECLBS | CHIP_STAT_PSLBS)
+
+/* ID and Lock Configuration */
+#define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
+#define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
+#define CHIP_RD_ID_DEV		CFG_FLASH_ID
+
+/* dimensions */
+#define CHIP_WIDTH		2		/* chips are in 16 bit mode */
+#define CHIP_WSHIFT		1		/* (log2 of CHIP_WIDTH) */
+#define CHIP_NBLOCKS		128
+#define CHIP_BLKSZ		(128 * 1024)	/* of 128Kbytes each */
+#define CHIP_SIZE		(CHIP_BLKSZ * CHIP_NBLOCKS)
+
+/********************** DEFINES for Hymod Flash ******************************/
+
+/*
+ * The hymod board has 2 x 28F320J5 chips running in
+ * 16 bit mode, for a 32 bit wide bank.
+ */
+
+typedef unsigned short bank_word_t;		/* 8/16/32/64bit unsigned int */
+typedef volatile bank_word_t *bank_addr_t;
+typedef unsigned long bank_size_t;		/* want this big - >= 32 bit */
+
+#define BANK_CHIP_WIDTH		1		/* each bank is 1 chip wide */
+#define BANK_CHIP_WSHIFT	0		/* (log2 of BANK_CHIP_WIDTH) */
+
+#define BANK_WIDTH		(CHIP_WIDTH * BANK_CHIP_WIDTH)
+#define BANK_WSHIFT		(CHIP_WSHIFT + BANK_CHIP_WSHIFT)
+#define BANK_NBLOCKS		CHIP_NBLOCKS
+#define BANK_BLKSZ		(CHIP_BLKSZ * BANK_CHIP_WIDTH)
+#define BANK_SIZE		(CHIP_SIZE * BANK_CHIP_WIDTH)
+
+#define MAX_BANKS		1		/* only one bank possible */
+
+/* align bank addresses and sizes to bank word boundaries */
+#define BANK_ADDR_WORD_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
+				    & ~(BANK_WIDTH - 1)))
+#define BANK_SIZE_WORD_ALIGN(s)	((bank_size_t)BANK_ADDR_WORD_ALIGN( \
+				    (bank_size_t)(s) + (BANK_WIDTH - 1)))
+
+/* align bank addresses and sizes to bank block boundaries */
+#define BANK_ADDR_BLK_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
+				    & ~(BANK_BLKSZ - 1)))
+#define BANK_SIZE_BLK_ALIGN(s)	((bank_size_t)BANK_ADDR_BLK_ALIGN( \
+				    (bank_size_t)(s) + (BANK_BLKSZ - 1)))
+
+/* align bank addresses and sizes to bank boundaries */
+#define BANK_ADDR_BANK_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
+				    & ~(BANK_SIZE - 1)))
+#define BANK_SIZE_BANK_ALIGN(s)	((bank_size_t)BANK_ADDR_BANK_ALIGN( \
+				    (bank_size_t)(s) + (BANK_SIZE - 1)))
+
+/* add an offset to a bank address */
+#define BANK_ADDR_OFFSET(a, o)	(bank_addr_t)((bank_size_t)(a) + \
+				    (bank_size_t)(o))
+
+/* get base address of bank b, given flash base address a */
+#define BANK_ADDR_BASE(a, b)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
+				    (bank_size_t)(b) * BANK_SIZE)
+
+/* adjust a bank address to start of next word, block or bank */
+#define BANK_ADDR_NEXT_WORD(a)	BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
+				    BANK_WIDTH)
+#define BANK_ADDR_NEXT_BLK(a)	BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
+				    BANK_BLKSZ)
+#define BANK_ADDR_NEXT_BANK(a)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
+				    BANK_SIZE)
+
+/* get bank address of chip register r given a bank base address a */
+#define BANK_ADDR_REG(a, r)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
+				    ((bank_size_t)(r) << BANK_WSHIFT))
+
+/* make a bank address for each chip register address */
+
+#define BANK_ADDR_REG_MAN(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
+#define BANK_ADDR_REG_DEV(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
+#define BANK_ADDR_REG_CFGM(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
+#define BANK_ADDR_REG_CFG(b,a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))
+
+/*
+ * replicate a chip cmd/stat/rd value into each byte position within a word
+ * so that multiple chips are accessed in a single word i/o operation
+ *
+ * this must be as wide as the bank_word_t type, and take into account the
+ * chip width and bank layout
+ */
+
+#define BANK_FILL_WORD(o)	((bank_word_t)(o))
+
+/* make a bank word value for each chip cmd/stat/rd value */
+
+/* Commands */
+#define BANK_CMD_RST		BANK_FILL_WORD(CHIP_CMD_RST)
+#define BANK_CMD_RD_ID		BANK_FILL_WORD(CHIP_CMD_RD_ID)
+#define BANK_CMD_RD_STAT	BANK_FILL_WORD(CHIP_CMD_RD_STAT)
+#define BANK_CMD_CLR_STAT	BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
+#define BANK_CMD_ERASE1		BANK_FILL_WORD(CHIP_CMD_ERASE1)
+#define BANK_CMD_ERASE2		BANK_FILL_WORD(CHIP_CMD_ERASE2)
+#define BANK_CMD_PROG		BANK_FILL_WORD(CHIP_CMD_PROG)
+#define BANK_CMD_LOCK		BANK_FILL_WORD(CHIP_CMD_LOCK)
+#define BANK_CMD_SET_LOCK_BLK	BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
+#define BANK_CMD_SET_LOCK_MSTR	BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
+#define BANK_CMD_CLR_LOCK_BLK	BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)
+
+/* status register bits */
+#define BANK_STAT_DPS		BANK_FILL_WORD(CHIP_STAT_DPS)
+#define BANK_STAT_PSS		BANK_FILL_WORD(CHIP_STAT_PSS)
+#define BANK_STAT_VPPS		BANK_FILL_WORD(CHIP_STAT_VPPS)
+#define BANK_STAT_PSLBS		BANK_FILL_WORD(CHIP_STAT_PSLBS)
+#define BANK_STAT_ECLBS		BANK_FILL_WORD(CHIP_STAT_ECLBS)
+#define BANK_STAT_ESS		BANK_FILL_WORD(CHIP_STAT_ESS)
+#define BANK_STAT_RDY		BANK_FILL_WORD(CHIP_STAT_RDY)
+
+#define BANK_STAT_ERR		BANK_FILL_WORD(CHIP_STAT_ERR)
+
+/* ID and Lock Configuration */
+#define BANK_RD_ID_LOCK		BANK_FILL_WORD(CHIP_RD_ID_LOCK)
+#define BANK_RD_ID_MAN		BANK_FILL_WORD(CHIP_RD_ID_MAN)
+#define BANK_RD_ID_DEV		BANK_FILL_WORD(CHIP_RD_ID_DEV)
diff --git a/board/Marvell/common/memory.c b/board/Marvell/common/memory.c
new file mode 100644
index 0000000000..45353af41e
--- /dev/null
+++ b/board/Marvell/common/memory.c
@@ -0,0 +1,1390 @@
+/*
+ * Copyright - Galileo technology.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * written or collected and sometimes rewritten by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ */
+
+
+#include <common.h>
+#include "../include/core.h"
+#include "../include/memory.h"
+
+/*******************************************************************************
+* memoryGetBankBaseAddress - Returns the base address of a memory bank.
+* DESCRIPTION:
+*       This function returns the base address of one of the SDRAM’s memory
+*       banks. There are 4 memory banks and each one represents one DIMM side.
+* INPUT:
+*       MEMORY_BANK bank - Selects one of the four banks as defined in Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit Memory bank base address.
+*******************************************************************************/
+static unsigned long memoryGetBankRegOffset (MEMORY_BANK bank)
+{
+	switch (bank) {
+	case BANK0:
+		return SCS_0_LOW_DECODE_ADDRESS;
+	case BANK1:
+		return SCS_1_LOW_DECODE_ADDRESS;
+	case BANK2:
+		return SCS_2_LOW_DECODE_ADDRESS;
+	case BANK3:
+		return SCS_3_LOW_DECODE_ADDRESS;
+
+	}
+	return SCS_0_LOW_DECODE_ADDRESS;	/* default value */
+}
+
+unsigned int memoryGetBankBaseAddress (MEMORY_BANK bank)
+{
+	unsigned int base;
+	unsigned int regOffset = memoryGetBankRegOffset (bank);
+
+	GT_REG_READ (regOffset, &base);
+	base = base << 16;	/* MV6436x */
+	return base;
+}
+
+/*******************************************************************************
+* memoryGetDeviceBaseAddress - Returns the base address of a device.
+* DESCRIPTION:
+*       This function returns the base address of a device on the system. There
+*       are 5 possible devices (0 - 4 and one boot device) as defined in
+*       gtMemory.h. Each of the device parameters is maped to one of the CS
+*       (Devices chip selects) base address register.
+* INPUT:
+*       device - Selects one of the five devices as defined in Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit Device base address.
+*
+*******************************************************************************/
+static unsigned int memoryGetDeviceRegOffset (DEVICE device)
+{
+	switch (device) {
+	case DEVICE0:
+		return CS_0_LOW_DECODE_ADDRESS;
+	case DEVICE1:
+		return CS_1_LOW_DECODE_ADDRESS;
+	case DEVICE2:
+		return CS_2_LOW_DECODE_ADDRESS;
+	case DEVICE3:
+		return CS_3_LOW_DECODE_ADDRESS;
+	case BOOT_DEVICE:
+		return BOOTCS_LOW_DECODE_ADDRESS;
+	}
+	return CS_0_LOW_DECODE_ADDRESS;	/* default value */
+}
+
+unsigned int memoryGetDeviceBaseAddress (DEVICE device)
+{
+	unsigned int regBase;
+	unsigned int regOffset = memoryGetDeviceRegOffset (device);
+
+	GT_REG_READ (regOffset, &regBase);
+
+	regBase = regBase << 16;	/* MV6436x */
+	return regBase;
+}
+
+/*******************************************************************************
+* MemoryGetPciBaseAddr - Returns the base address of a PCI window.
+* DESCRIPTION:
+*       This function returns the base address of a PCI window. There are 5
+*       possible PCI windows (memory 0 - 3 and one for I/O) for each PCI
+*       interface as defined in gtMemory.h, used by the CPU's address decoding
+*       mechanism.
+*	New in MV6436x
+* INPUT:
+*       pciWindow - Selects one of the PCI windows as defined in Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit PCI window base address.
+*******************************************************************************/
+unsigned int MemoryGetPciBaseAddr (PCI_MEM_WINDOW pciWindow)
+{
+	unsigned int baseAddrReg, base;
+
+	switch (pciWindow) {
+	case PCI_0_IO:
+		baseAddrReg = PCI_0I_O_LOW_DECODE_ADDRESS;	/*PCI_0_IO_BASE_ADDR;  */
+		break;
+	case PCI_0_MEM0:
+		baseAddrReg = PCI_0MEMORY0_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY0_BASE_ADDR; */
+		break;
+	case PCI_0_MEM1:
+		baseAddrReg = PCI_0MEMORY1_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY1_BASE_ADDR; */
+		break;
+	case PCI_0_MEM2:
+		baseAddrReg = PCI_0MEMORY2_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY2_BASE_ADDR;  */
+		break;
+	case PCI_0_MEM3:
+		baseAddrReg = PCI_0MEMORY3_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY3_BASE_ADDR;  */
+		break;
+#ifdef INCLUDE_PCI_1
+	case PCI_1_IO:
+		baseAddrReg = PCI_1I_O_LOW_DECODE_ADDRESS;	/*PCI_1_IO_BASE_ADDR;  */
+		break;
+	case PCI_1_MEM0:
+		baseAddrReg = PCI_1MEMORY0_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY0_BASE_ADDR; */
+		break;
+	case PCI_1_MEM1:
+		baseAddrReg = PCI_1MEMORY1_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY1_BASE_ADDR;  */
+		break;
+	case PCI_1_MEM2:
+		baseAddrReg = PCI_1MEMORY2_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY2_BASE_ADDR;  */
+		break;
+	case PCI_1_MEM3:
+		baseAddrReg = PCI_1MEMORY3_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY3_BASE_ADDR; */
+		break;
+#endif /* INCLUDE_PCI_1 */
+	default:
+		return 0xffffffff;
+	}
+	GT_REG_READ (baseAddrReg, &base);
+	return (base << 16);
+}
+
+/*******************************************************************************
+* memoryGetBankSize - Returns the size of a memory bank.
+* DESCRIPTION:
+*       This function returns the size of memory bank as described in
+*       'gtMemoryGetBankBaseAddress' function.
+* INPUT:
+*       bank - Selects one of the four banks as defined in Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit size memory bank size or 0 for a closed or non populated bank.
+*
+*******************************************************************************/
+unsigned int memoryGetBankSize (MEMORY_BANK bank)
+{
+	unsigned int sizeReg, size;
+	MEMORY_WINDOW window;
+
+	switch (bank) {
+	case BANK0:
+		sizeReg = SCS_0_HIGH_DECODE_ADDRESS;	/* CS_0_SIZE; */
+		window = CS_0_WINDOW;
+		break;
+	case BANK1:
+		sizeReg = SCS_1_HIGH_DECODE_ADDRESS;	/* CS_1_SIZE; */
+		window = CS_1_WINDOW;
+		break;
+	case BANK2:
+		sizeReg = SCS_2_HIGH_DECODE_ADDRESS;	/* CS_2_SIZE; */
+		window = CS_2_WINDOW;
+		break;
+	case BANK3:
+		sizeReg = SCS_3_HIGH_DECODE_ADDRESS;	/* CS_3_SIZE; */
+		window = CS_3_WINDOW;
+		break;
+	default:
+		return 0;
+		break;
+	}
+	/* If the window is closed, a size of 0 is returned */
+	if (MemoryGetMemWindowStatus (window) != MEM_WINDOW_ENABLED)
+		return 0;
+	GT_REG_READ (sizeReg, &size);
+	size = ((size << 16) | 0xffff) + 1;
+	return size;
+}
+
+/*******************************************************************************
+* memoryGetDeviceSize - Returns the size of a device memory space.
+* DESCRIPTION:
+*       This function returns the memory space size of a given device.
+* INPUT:
+*       device - Selects one of the five devices as defined in Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit size of a device memory space.
+*******************************************************************************/
+unsigned int memoryGetDeviceSize (DEVICE device)
+{
+	unsigned int sizeReg, size;
+	MEMORY_WINDOW window;
+
+	switch (device) {
+	case DEVICE0:
+		sizeReg = CS_0_HIGH_DECODE_ADDRESS;	/*DEV_CS0_SIZE; */
+		window = DEVCS_0_WINDOW;
+		break;
+	case DEVICE1:
+		sizeReg = CS_1_HIGH_DECODE_ADDRESS;	/*DEV_CS1_SIZE; */
+		window = DEVCS_1_WINDOW;
+		break;
+	case DEVICE2:
+		sizeReg = CS_2_HIGH_DECODE_ADDRESS;	/*DEV_CS2_SIZE; */
+		window = DEVCS_2_WINDOW;
+		break;
+	case DEVICE3:
+		sizeReg = CS_3_HIGH_DECODE_ADDRESS;	/*DEV_CS3_SIZE; */
+		window = DEVCS_3_WINDOW;
+		break;
+	case BOOT_DEVICE:
+		sizeReg = BOOTCS_HIGH_DECODE_ADDRESS;	/*BOOTCS_SIZE; */
+		window = BOOT_CS_WINDOW;
+		break;
+	default:
+		return 0;
+		break;
+	}
+	/* If the window is closed, a size of 0 is returned */
+	if (MemoryGetMemWindowStatus (window) != MEM_WINDOW_ENABLED)
+		return 0;
+	GT_REG_READ (sizeReg, &size);
+	size = ((size << 16) | 0xffff) + 1;
+	return size;
+}
+
+/*******************************************************************************
+* MemoryGetPciWindowSize - Returns the size of a PCI memory window.
+* DESCRIPTION:
+*       This function returns the size of a PCI window.
+* INPUT:
+*       pciWindow - Selects one of the PCI memory windows as defined in
+*       Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit size of a PCI memory window.
+*******************************************************************************/
+unsigned int MemoryGetPciWindowSize (PCI_MEM_WINDOW pciWindow)
+{
+	unsigned int sizeReg, size;
+
+	switch (pciWindow) {
+	case PCI_0_IO:
+		sizeReg = PCI_0I_O_HIGH_DECODE_ADDRESS;	/*PCI_0_IO_SIZE; */
+		break;
+	case PCI_0_MEM0:
+		sizeReg = PCI_0MEMORY0_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY0_SIZE; */
+		break;
+	case PCI_0_MEM1:
+		sizeReg = PCI_0MEMORY1_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY1_SIZE; */
+		break;
+	case PCI_0_MEM2:
+		sizeReg = PCI_0MEMORY2_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY2_SIZE; */
+		break;
+	case PCI_0_MEM3:
+		sizeReg = PCI_0MEMORY3_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY3_SIZE; */
+		break;
+#ifdef INCLUDE_PCI_1
+	case PCI_1_IO:
+		sizeReg = PCI_1I_O_HIGH_DECODE_ADDRESS;	/*PCI_1_IO_SIZE; */
+		break;
+	case PCI_1_MEM0:
+		sizeReg = PCI_1MEMORY0_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY0_SIZE; */
+		break;
+	case PCI_1_MEM1:
+		sizeReg = PCI_1MEMORY1_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY1_SIZE;  */
+		break;
+	case PCI_1_MEM2:
+		sizeReg = PCI_1MEMORY2_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY2_SIZE;  */
+		break;
+	case PCI_1_MEM3:
+		sizeReg = PCI_1MEMORY3_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY3_SIZE; */
+		break;
+#endif /* INCLUDE_PCI_1 */
+	default:
+		return 0x0;
+	}
+	/* If the memory window is disabled, retrun size = 0 */
+	if (MemoryGetMemWindowStatus (PCI_0_IO_WINDOW << pciWindow)
+	    == MEM_WINDOW_DISABLED)
+		return 0;
+	GT_REG_READ (sizeReg, &size);
+	size = ((size << 16) | 0xffff) + 1;
+	return size;
+}
+
+/*******************************************************************************
+* memoryGetDeviceWidth - Returns the width of a given device.
+* DESCRIPTION:
+*       The MV's device interface supports up to 32 Bit wide devices. A device
+*       can have a  1, 2, 4 or 8 Bytes data width. This function returns the
+*       width of a device as defined by the user or the operating system.
+* INPUT:
+*       device - Selects one of the five devices as defined in Memory.h.
+* OUTPUT:
+*       None.
+* RETURN:
+*       Device width in Bytes (1,2,4 or 8), 0 if error had occurred.
+*******************************************************************************/
+unsigned int memoryGetDeviceWidth (DEVICE device)
+{
+	unsigned int width;
+	unsigned int regValue;
+
+	GT_REG_READ (DEVICE_BANK0PARAMETERS + device * 4, &regValue);
+	width = (regValue & (BIT20 | BIT21)) >> 20;
+	return (BIT0 << width);
+}
+
+/*******************************************************************************
+* memoryMapBank - Set new base address and size for one of the memory
+*                         banks.
+*
+* DESCRIPTION:
+*       The CPU interface address decoding map consists of 21 address windows
+*       for the different devices (e.g. CS[3:0] ,PCI0 Mem 0/1/2/3...). Each
+*       window can have a minimum of 1Mbytes of address space, and up to 4Gbyte
+*       space. Each address window is defined by two registers - base and size.
+*       The CPU address is compared with the values in the various CPU windows
+*       until a match is found and the address is than targeted to that window.
+*       This function sets new base and size for one the memory banks
+*       (CS0 - CS3). It is the programmer`s responsibility to make sure that
+*       there are no conflicts with other memory spaces. When two memory spaces
+*       overlap, the MV’s behavior is not defined .If a bank needs to be closed,
+*       set the ’bankLength’ parameter size to 0x0.
+*
+* INPUT:
+*       bank      - One of the memory banks (CS0-CS3) as defined in gtMemory.h.
+*       bankBase  - The memory bank base address.
+*       bankLength  - The memory bank size. This function will decrement the
+*                   'bankLength' parameter by one and then check if the size is
+*                   valid. A valid size must be programed from LSB to MSB as
+*                   sequence of ‘1’s followed by sequence of ‘0’s.
+*                   To close a memory window simply set the size to 0.
+*      NOTE!!!
+*       The size must be in 64Kbyte granularity.
+*       The base address must be aligned to the size.
+* OUTPUT:
+*       None.
+* RETURN:
+*       False for invalid size, true otherwise.
+*
+* CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!!
+*
+*******************************************************************************/
+
+bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
+		    unsigned int bankLength)
+{
+	unsigned int newBase, newSize, baseReg, sizeReg, temp, rShift;
+
+/*    PCI_INTERNAL_BAR pciBAR; */
+
+	switch (bank) {
+	case BANK0:
+		baseReg = SCS_0_LOW_DECODE_ADDRESS;	/*CS_0_BASE_ADDR; */
+		sizeReg = SCS_0_HIGH_DECODE_ADDRESS;	/*CS_0_SIZE; */
+/*        pciBAR = PCI_CS0_BAR; */
+		break;
+	case BANK1:
+		baseReg = SCS_1_LOW_DECODE_ADDRESS;	/*CS_1_BASE_ADDR; */
+		sizeReg = SCS_1_HIGH_DECODE_ADDRESS;	/*CS_1_SIZE; */
+		/*        pciBAR = SCS_0_HIGH_DECODE_ADDRESS; */ /*PCI_CS1_BAR; */
+		break;
+	case BANK2:
+		baseReg = SCS_2_LOW_DECODE_ADDRESS;	/*CS_2_BASE_ADDR; */
+		sizeReg = SCS_2_HIGH_DECODE_ADDRESS;	/*CS_2_SIZE; */
+/*        pciBAR = PCI_CS2_BAR;*/
+		break;
+	case BANK3:
+		baseReg = SCS_3_LOW_DECODE_ADDRESS;	/*CS_3_BASE_ADDR; */
+		sizeReg = SCS_3_HIGH_DECODE_ADDRESS;	/*CS_3_SIZE; */
+/*        pciBAR = PCI_CS3_BAR; */
+		break;
+	default:
+		return false;
+	}
+	/* If the size is 0, the window will be disabled */
+	if (bankLength == 0) {
+		MemoryDisableWindow (CS_0_WINDOW << bank);
+		/* Disable the BAR from the PCI slave side */
+/*        gtPci0DisableInternalBAR(pciBAR); */
+/*        gtPci1DisableInternalBAR(pciBAR); */
+		return true;
+	}
+	/* The base address must be aligned to the size */
+	if ((bankBase % bankLength) != 0) {
+		return false;
+	}
+	if (bankLength >= MINIMUM_MEM_BANK_SIZE) {
+		newBase = bankBase >> 16;
+		newSize = bankLength >> 16;
+		/* Checking that the size is a sequence of '1' followed by a
+		   sequence of '0' starting from LSB to MSB. */
+		temp = newSize - 1;
+		for (rShift = 0; rShift < 16; rShift++) {
+			temp = temp >> rShift;
+			if ((temp & 0x1) == 0) {	/* Either we got to the last '1' */
+							/* or the size is not valid	 */
+				if (temp > 0x0)
+					return false;
+				else
+					break;
+			}
+		}
+#ifdef DEBUG
+		{
+			unsigned int oldBase, oldSize;
+
+			GT_REG_READ (baseReg, &oldBase);
+			GT_REG_READ (sizeReg + 8, &oldSize);
+
+			printf ("b%d Base:%x Size:%x -> Base:%x Size:%x\n",
+				bank, oldBase, oldSize, newBase, newSize);
+		}
+#endif
+		/* writing the new values */
+		GT_REG_WRITE (baseReg, newBase);
+		GT_REG_WRITE (sizeReg, newSize - 1);
+		/* Enable back the window */
+		MemoryEnableWindow (CS_0_WINDOW << bank);
+		/* Enable the BAR from the PCI slave side */
+/*        gtPci0EnableInternalBAR(pciBAR); */
+/*        gtPci1EnableInternalBAR(pciBAR); */
+		return true;
+	}
+	return false;
+}
+
+
+/*******************************************************************************
+* memoryMapDeviceSpace - Set new base address and size for one of the device
+*                           windows.
+*
+* DESCRIPTION:
+*       The CPU interface address decoding map consists of 21 address windows
+*       for the different devices (e.g. CS[3:0] ,PCI0 Mem 0/1/2/3...). Each
+*       window can have a minimum of 1Mbytes of address space, and up to 4Gbyte
+*       space. Each address window is defined by two registers - base and size.
+*       The CPU address is compared with the values in the various CPU windows
+*       until a match is found and the address is than targeted to that window.
+*       This function sets new base and size for one the device windows
+*       (DEV_CS0 - DEV_CS3). It is the programmer`s responsibility to make sure
+*       that there are no conflicts with other memory spaces. When two memory
+*       spaces overlap, the MV’s behavior is not defined .If a device window
+*       needs to be closed, set the 'deviceLength' parameter size to 0x0.
+*
+* INPUT:
+*       device           - One of the device windows (DEV_CS0-DEV_CS3) as
+*                          defined in gtMemory.h.
+*       deviceBase - The device window base address.
+*       deviceLength - The device window size. This function will decrement
+*                          the 'deviceLength' parameter by one and then
+*                          check if the size is valid. A valid size must be
+*                          programed from LSB to MSB as sequence of ‘1’s
+*                          followed by sequence of ‘0’s.
+*                          To close a memory window simply set the size to 0.
+*
+*      NOTE!!!
+*       The size must be in 64Kbyte granularity.
+*       The base address must be aligned to the size.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       False for invalid size, true otherwise.
+*
+* CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!!
+*
+*******************************************************************************/
+
+bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
+			   unsigned int deviceLength)
+{
+	unsigned int newBase, newSize, baseReg, sizeReg, temp, rShift;
+
+/*    PCI_INTERNAL_BAR pciBAR;*/
+
+	switch (device) {
+	case DEVICE0:
+		baseReg = CS_0_LOW_DECODE_ADDRESS;	/*DEV_CS0_BASE_ADDR; */
+		sizeReg = CS_0_HIGH_DECODE_ADDRESS;	/*DEV_CS0_SIZE; */
+/*        pciBAR = PCI_DEV_CS0_BAR; */
+		break;
+	case DEVICE1:
+		baseReg = CS_1_LOW_DECODE_ADDRESS;	/*DEV_CS1_BASE_ADDR; */
+		sizeReg = CS_1_HIGH_DECODE_ADDRESS;	/*DEV_CS1_SIZE; */
+/*        pciBAR = PCI_DEV_CS1_BAR; */
+		break;
+	case DEVICE2:
+		baseReg = CS_2_LOW_DECODE_ADDRESS;	/*DEV_CS2_BASE_ADDR; */
+		sizeReg = CS_2_HIGH_DECODE_ADDRESS;	/*DEV_CS2_SIZE; */
+/*        pciBAR = PCI_DEV_CS2_BAR; */
+		break;
+	case DEVICE3:
+		baseReg = CS_3_LOW_DECODE_ADDRESS;	/*DEV_CS3_BASE_ADDR; */
+		sizeReg = CS_3_HIGH_DECODE_ADDRESS;	/*DEV_CS3_SIZE; */
+/*        pciBAR = PCI_DEV_CS3_BAR; */
+		break;
+	case BOOT_DEVICE:
+		baseReg = BOOTCS_LOW_DECODE_ADDRESS;	/*BOOTCS_BASE_ADDR; */
+		sizeReg = BOOTCS_HIGH_DECODE_ADDRESS;	/*BOOTCS_SIZE; */
+/*        pciBAR = PCI_BOOT_CS_BAR; */
+		break;
+	default:
+		return false;
+	}
+	if (deviceLength == 0) {
+		MemoryDisableWindow (DEVCS_0_WINDOW << device);
+		/* Disable the BAR from the PCI slave side */
+/*        gtPci0DisableInternalBAR(pciBAR); */
+/*        gtPci1DisableInternalBAR(pciBAR); */
+		return true;
+	}
+	/* The base address must be aligned to the size */
+	if ((deviceBase % deviceLength) != 0) {
+		return false;
+	}
+	if (deviceLength >= MINIMUM_DEVICE_WINDOW_SIZE) {
+		newBase = deviceBase >> 16;
+		newSize = deviceLength >> 16;
+		/* Checking that the size is a sequence of '1' followed by a
+		   sequence of '0' starting from LSB to MSB. */
+		temp = newSize - 1;
+		for (rShift = 0; rShift < 16; rShift++) {
+			temp = temp >> rShift;
+			if ((temp & 0x1) == 0) {	/* Either we got to the last '1' */
+							/* or the size is not valid       */
+				if (temp > 0x0)
+					return false;
+				else
+					break;
+			}
+		}
+		/* writing the new values */
+		GT_REG_WRITE (baseReg, newBase);
+		GT_REG_WRITE (sizeReg, newSize - 1);
+		MemoryEnableWindow (DEVCS_0_WINDOW << device);
+		/* Enable the BAR from the PCI slave side */
+/*        gtPci0EnableInternalBAR(pciBAR); */
+/*        gtPci1EnableInternalBAR(pciBAR); */
+		return true;
+	}
+	return false;
+}
+
+/*******************************************************************************
+* MemorySetPciWindow - Set new base address and size for one of the PCI
+*                        windows.
+*
+* DESCRIPTION:
+*       The CPU interface address decoding map consists of 21 address windows
+*       for the different devices (e.g. CS[3:0] ,PCI0 Mem 0/1/2/3...). Each
+*       window can have a minimum of 1Mbytes of address space, and up to 4Gbyte
+*       space. Each address window is defined by two registers - base and size.
+*       The CPU address is compared with the values in the various CPU windows
+*       until a match is found and the address is than targeted to that window.
+*       This function sets new base and size for one the PCI windows
+*       (PCI memory0/1/2..). It is the programmer`s responsibility to make sure
+*       that there are no conflicts with other memory spaces. When two memory
+*       spaces overlap, the MV’s behavior is not defined .If a PCI window
+*       needs to be closed, set the 'pciWindowSize' parameter size to 0x0.
+*
+* INPUT:
+*       pciWindow     - One of the PCI windows as defined in gtMemory.h.
+*       pciWindowBase - The PCI window base address.
+*       pciWindowSize - The PCI window size. This function will decrement the
+*                       'pciWindowSize' parameter by one and then check if the
+*                       size is valid. A valid size must be programed from LSB
+*                       to MSB as sequence of ‘1’s followed by sequence of ‘0’s.
+*                       To close a memory window simply set the size to 0.
+*
+*      NOTE!!!
+*       The size must be in 64Kbyte granularity.
+*       The base address must be aligned to the size.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       False for invalid size, true otherwise.
+*
+*******************************************************************************/
+bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
+			 unsigned int pciWindowSize)
+{
+	unsigned int currentLow, baseAddrReg, sizeReg, temp, rShift;
+
+	switch (pciWindow) {
+	case PCI_0_IO:
+		baseAddrReg = PCI_1I_O_LOW_DECODE_ADDRESS;	/*PCI_0_IO_BASE_ADDR; */
+		sizeReg = PCI_0I_O_HIGH_DECODE_ADDRESS;	/*PCI_0_IO_SIZE; */
+		break;
+	case PCI_0_MEM0:
+		baseAddrReg = PCI_0MEMORY0_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY0_BASE_ADDR; */
+		sizeReg = PCI_0MEMORY0_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY0_SIZE; */
+		break;
+	case PCI_0_MEM1:
+		baseAddrReg = PCI_0MEMORY1_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY1_BASE_ADDR; */
+		sizeReg = PCI_0MEMORY1_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY1_SIZE; */
+		break;
+	case PCI_0_MEM2:
+		baseAddrReg = PCI_0MEMORY2_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY2_BASE_ADDR; */
+		sizeReg = PCI_0MEMORY2_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY2_SIZE; */
+		break;
+	case PCI_0_MEM3:
+		baseAddrReg = PCI_0MEMORY3_LOW_DECODE_ADDRESS;	/*PCI_0_MEMORY3_BASE_ADDR; */
+		sizeReg = PCI_0MEMORY3_HIGH_DECODE_ADDRESS;	/*PCI_0_MEMORY3_SIZE; */
+		break;
+#ifdef INCLUDE_PCI_1
+	case PCI_1_IO:
+		baseAddrReg = PCI_1I_O_LOW_DECODE_ADDRESS;	/*PCI_1_IO_BASE_ADDR; */
+		sizeReg = PCI_1I_O_HIGH_DECODE_ADDRESS;	/*PCI_1_IO_SIZE; */
+		break;
+	case PCI_1_MEM0:
+		baseAddrReg = PCI_1MEMORY0_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY0_BASE_ADDR; */
+		sizeReg = PCI_1MEMORY0_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY0_SIZE; */
+		break;
+	case PCI_1_MEM1:
+		baseAddrReg = PCI_1MEMORY1_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY1_BASE_ADDR;  */
+		sizeReg = PCI_1MEMORY1_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY1_SIZE; */
+		break;
+	case PCI_1_MEM2:
+		baseAddrReg = PCI_1MEMORY2_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY2_BASE_ADDR;  */
+		sizeReg = PCI_1MEMORY2_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY2_SIZE; */
+		break;
+	case PCI_1_MEM3:
+		baseAddrReg = PCI_1MEMORY3_LOW_DECODE_ADDRESS;	/*PCI_1_MEMORY3_BASE_ADDR; */
+		sizeReg = PCI_1MEMORY3_HIGH_DECODE_ADDRESS;	/*PCI_1_MEMORY3_SIZE; */
+		break;
+#endif /* INCLUDE_PCI_1 */
+	default:
+		return false;
+	}
+	if (pciWindowSize == 0) {
+		MemoryDisableWindow (PCI_0_IO_WINDOW << pciWindow);
+		return true;
+	}
+	/* The base address must be aligned to the size */
+	if ((pciWindowBase % pciWindowSize) != 0) {
+		return false;
+	}
+	if (pciWindowSize >= MINIMUM_PCI_WINDOW_SIZE) {
+		pciWindowBase >>= 16;
+		pciWindowSize >>= 16;
+		/* Checking that the size is a sequence of '1' followed by a
+		   sequence of '0' starting from LSB to MSB. */
+		temp = pciWindowSize - 1;
+		for (rShift = 0; rShift < 16; rShift++) {
+			temp = temp >> rShift;
+			if ((temp & 0x1) == 0) {	/* Either we got to the last '1' */
+							/* or the size is not valid       */
+				if (temp > 0x0)
+					return false;
+				else
+					break;
+			}
+		}
+		GT_REG_WRITE (sizeReg, pciWindowSize - 1);
+		GT_REG_READ (baseAddrReg, &currentLow);
+		pciWindowBase =
+			(pciWindowBase & 0xfffff) | (currentLow & 0xfff00000);
+		GT_REG_WRITE (baseAddrReg, pciWindowBase);
+		MemoryEnableWindow (PCI_0_IO_WINDOW << pciWindow);
+		return true;
+	}
+	return false;
+}
+
+/*******************************************************************************
+* memoryMapInternalRegistersSpace - Sets new base address for the internal
+*                                  registers memory space.
+*
+* DESCRIPTION:
+*       This function set new base address for the internal register’s memory
+*       space (the size is fixed and cannot be modified). The function does not
+*       handle overlapping with other memory spaces, it is the programer's
+*       responsibility to ensure that overlapping does not occur.
+*       When two memory spaces overlap, the MV’s behavior is not defined.
+*
+* INPUT:
+*       internalRegBase - new base address for the internal register’s memory
+*                         space.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*        true on success, false on failure
+*
+*******************************************************************************/
+/********************************************************************
+* memoryMapInternalRegistersSpace - Sets new base address for the internals
+*                                   registers.
+*
+* INPUTS:  unsigned int internalRegBase - The new base address.
+* RETURNS: true on success, false on failure
+*********************************************************************/
+bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
+{
+	unsigned int currentValue;
+	unsigned int internalValue = internalRegBase;
+
+	internalRegBase = (internalRegBase >> 16);
+	GT_REG_READ (INTERNAL_SPACE_DECODE, &currentValue);
+	internalRegBase = (currentValue & 0xff000000) | internalRegBase;
+	GT_REG_WRITE (INTERNAL_SPACE_DECODE, internalRegBase);
+	/* initializing also the global variable 'internalRegBaseAddr' */
+/*    gtInternalRegBaseAddr = internalValue; */
+	INTERNAL_REG_BASE_ADDR = internalValue;
+	return true;
+}
+
+/*******************************************************************************
+* memoryGetInternalRegistersSpace - Returns the internal registers Base
+*                                     address.
+*
+* DESCRIPTION:
+*       This function returns the base address of  the internal register’s
+*       memory space .
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32 bit base address of the internal register’s memory space.
+*
+*******************************************************************************/
+unsigned int memoryGetInternalRegistersSpace (void)
+{
+	unsigned int currentValue = 0;
+
+	GT_REG_READ (INTERNAL_SPACE_DECODE, &currentValue);
+	return ((currentValue & 0x000fffff) << 16);
+}
+
+/*******************************************************************************
+* gtMemoryGetInternalSramBaseAddr - Returns the integrated SRAM base address.
+*
+* DESCRIPTION:
+*       The Atlantis incorporate integrated 2Mbit SRAM for general use. This
+*       funcnion return the SRAM's base address.
+* INPUT:
+*       None.
+* OUTPUT:
+*       None.
+* RETURN:
+*       32 bit SRAM's base address.
+*
+*******************************************************************************/
+unsigned int memoryGetInternalSramBaseAddr (void)
+{
+	return ((GTREGREAD (INTEGRATED_SRAM_BASE_ADDR) & 0xfffff) << 16);
+}
+
+/*******************************************************************************
+* gtMemorySetInternalSramBaseAddr - Set the integrated SRAM base address.
+*
+* DESCRIPTION:
+*       The Atlantis incorporate integrated 2Mbit SRAM for general use. This
+*       function sets a new base address to the SRAM .
+* INPUT:
+*       sramBaseAddress - The SRAM's base address.
+* OUTPUT:
+*       None.
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress)
+{
+	GT_REG_WRITE (INTEGRATED_SRAM_BASE_ADDR, sramBaseAddress >> 16);
+}
+
+/*******************************************************************************
+* memorySetProtectRegion - Set protection mode for one of the 8 regions.
+*
+* DESCRIPTION:
+*       The CPU interface supports configurable access protection. This includes
+*       up to eight address ranges defined to a different protection type :
+*       whether the address range is cacheable or not, whether it is writable or
+*       not , and whether it is accessible or not. A Low and High registers
+*       define each window while the minimum address range of each window is
+*       1Mbyte. An address driven by the CPU, in addition to the address
+*       decoding and remapping process, is compared against the eight Access
+*       Protection Low/High registers , if an address matches one of the windows
+*       , the MV device checks the transaction type against the protection bits
+*       defined in CPU Access Protection register, to determine if the access is
+*       allowed. This function set a protection mode to one of the 8 possible
+*       regions.
+*      NOTE:
+*       The CPU address windows are restricted to a size of  2 power n and the
+*       start address must be aligned to the window size. For example, if using
+*       a 16 MB window, the start address bits [23:0] must be 0.The MV's
+*       internal registers space is not protected, even if the access protection
+*       windows contain this space.
+*
+* INPUT:
+*       region - selects which region to be configured. The values defined in
+*                gtMemory.h:
+*
+*                 - MEM_REGION0
+*                 - MEM_REGION1
+*                 - etc.
+*
+*       memAccess - Allows or forbids access (read or write ) to the region. The
+*                   values defined in gtMemory.h:
+*
+*                    - MEM_ACCESS_ALLOWED
+*                    - MEM_ACCESS_FORBIDEN
+*
+*       memWrite - CPU write protection to the region. The values defined in
+*                  gtMemory.h:
+*
+*                   - MEM_WRITE_ALLOWED
+*                   - MEM_WRITE_FORBIDEN
+*
+*       cacheProtection - Defines whether caching the region is allowed or not.
+*                         The values defined in gtMemory.h:
+*
+*                          - MEM_CACHE_ALLOWED
+*                          - MEM_CACHE_FORBIDEN
+*
+*       baseAddress - the region's base Address.
+*       regionSize  - The region's size. This function will decrement the
+*                     'regionSize' parameter by one and then check if the size
+*                     is valid. A valid size must be programed from LSB to MSB
+*                     as sequence of ‘1’s followed by sequence of ‘0’s.
+*                     To close a memory window simply set the size to 0.
+*
+*      NOTE!!!
+*       The size must be in 64Kbyte granularity.
+*       The base address must be aligned to the size.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       False for invalid size, true otherwise.
+*
+*******************************************************************************/
+bool memorySetProtectRegion (MEMORY_PROTECT_WINDOW window,
+			     MEMORY_ACCESS memAccess,
+			     MEMORY_ACCESS_WRITE memWrite,
+			     MEMORY_CACHE_PROTECT cacheProtection,
+			     unsigned int baseAddress, unsigned int size)
+{
+	unsigned int dataForReg, temp, rShift;
+
+	if (size == 0) {
+		GT_REG_WRITE ((CPU_PROTECT_WINDOW_0_SIZE + 0x10 * window),
+			      0x0);
+		return true;
+	}
+	/* The base address must be aligned to the size.  */
+	if (baseAddress % size != 0) {
+		return false;
+	}
+	if (size >= MINIMUM_ACCESS_WIN_SIZE) {
+		baseAddress = ((baseAddress >> 16) & 0xfffff);
+		dataForReg = baseAddress | ((memAccess << 20) & BIT20) |
+			((memWrite << 21) & BIT21) | ((cacheProtection << 22)
+						      & BIT22) | BIT31;
+		GT_REG_WRITE (CPU_PROTECT_WINDOW_0_BASE_ADDR + 0x10 * window,
+			      dataForReg);
+		size >>= 16;
+		/* Checking that the size is a sequence of '1' followed by a
+		   sequence of '0' starting from LSB to MSB. */
+		temp = size - 1;
+		for (rShift = 0; rShift < 16; rShift++) {
+			temp = temp >> rShift;
+			if ((temp & 0x1) == 0) {	/* Either we got to the last '1' */
+							/* or the size is not valid       */
+				if (temp > 0x0)
+					return false;
+				else
+					break;
+			}
+		}
+		GT_REG_WRITE ((CPU_PROTECT_WINDOW_0_SIZE + 0x10 * window),
+			      size - 1);
+		return true;
+	}
+	return false;
+}
+
+/*******************************************************************************
+* gtMemoryDisableProtectRegion - Disable a protected window.
+*
+* DESCRIPTION:
+*       This function disable a protected window set by
+*       'gtMemorySetProtectRegion' function.
+*
+* INPUT:
+*       window - one of the 4 windows ( defined in gtMemory.h ).
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+void memoryDisableProtectRegion (MEMORY_PROTECT_WINDOW window)
+{
+	RESET_REG_BITS (((CPU_PROTECT_WINDOW_0_BASE_ADDR) + (0x10 * window)),
+			BIT31);
+}
+
+/*******************************************************************************
+* memorySetPciRemapValue - Set a remap value to a PCI memory space target.
+*
+* DESCRIPTION:
+*       In addition to the address decoding mechanism, the CPU has an address
+*       remapping mechanism to be used by every PCI decoding window. Each PCI
+*       window can be remaped to a desired address target according to the remap
+*       value within the remap register. The address remapping is useful when a
+*       CPU address range must be reallocated to a different location on the
+*       PCI bus. Also, it enables CPU access to a PCI agent located above the
+*       4Gbyte space. On system boot, each of the PCI memory spaces is maped to
+*       a defualt value (see CPU interface section in the MV spec for the
+*       default values). The remap mechanism does not always produce the desired
+*       address on the PCI bus because of the remap mechanism way of working
+*       (to fully understand why, please see the 'Address Remapping' section in
+*       the MV's spec). Therefor, this function sets a desired remap value to
+*       one of the PCI memory windows and return the effective address that
+*       should be used when exiting the PCI memory window. You should ALWAYS use
+*       the returned value by this function when remapping a PCI window and
+*       exiting it. If for example the base address of PCI0 memory 0 is
+*       0x90000000, the size is 0x03ffffff and the remap value is 0x11000000,
+*       the function will return the value of 0x91000000 that MUST
+*       be used to exit this memory window in order to achive the deisred
+*       remapping.
+*
+* INPUT:
+*       memoryWindow   - One of the PCI memory windows as defined in Memory.h
+*       remapValueLow  - The low remap value.
+*       remapValueHigh - The high remap value.
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       The effective base address to exit the PCI, or 0xffffffff if one of the
+*       parameters is erroneous or the effective base address is higher the top
+*       decode value.
+*
+*******************************************************************************/
+unsigned int memorySetPciRemapValue (PCI_MEM_WINDOW memoryWindow,
+				     unsigned int remapValueHigh,
+				     unsigned int remapValueLow)
+{
+	unsigned int pciMemWindowBaseAddrReg = 0, baseAddrValue = 0;
+	unsigned int pciMemWindowSizeReg = 0, windowSizeValue = 0;
+	unsigned int effectiveBaseAddress, remapRegLow, remapRegHigh;
+
+	/* Initializing the base and size variables of the PCI
+	   memory windows */
+	switch (memoryWindow) {
+	case PCI_0_IO:
+		pciMemWindowBaseAddrReg = PCI_0_IO_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_0_IO_SIZE;
+		remapRegLow = PCI_0_IO_ADDR_REMAP;
+		remapRegHigh = PCI_0_IO_ADDR_REMAP;
+		break;
+	case PCI_0_MEM0:
+		pciMemWindowBaseAddrReg = PCI_0_MEMORY0_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_0_MEMORY0_SIZE;
+		remapRegLow = PCI_0_MEMORY0_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_0_MEMORY0_HIGH_ADDR_REMAP;
+		break;
+	case PCI_0_MEM1:
+		pciMemWindowBaseAddrReg = PCI_0_MEMORY1_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_0_MEMORY1_SIZE;
+		remapRegLow = PCI_0_MEMORY1_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_0_MEMORY1_HIGH_ADDR_REMAP;
+		break;
+	case PCI_0_MEM2:
+		pciMemWindowBaseAddrReg = PCI_0_MEMORY2_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_0_MEMORY2_SIZE;
+		remapRegLow = PCI_0_MEMORY2_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_0_MEMORY2_HIGH_ADDR_REMAP;
+		break;
+	case PCI_0_MEM3:
+		pciMemWindowBaseAddrReg = PCI_0_MEMORY3_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_0_MEMORY3_SIZE;
+		remapRegLow = PCI_0_MEMORY3_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_0_MEMORY3_HIGH_ADDR_REMAP;
+		break;
+#ifdef INCLUDE_PCI_1
+	case PCI_1_IO:
+		pciMemWindowBaseAddrReg = PCI_1_IO_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_1_IO_SIZE;
+		remapRegLow = PCI_1_IO_ADDR_REMAP;
+		remapRegHigh = PCI_1_IO_ADDR_REMAP;
+		break;
+	case PCI_1_MEM0:
+		pciMemWindowBaseAddrReg = PCI_1_MEMORY0_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_1_MEMORY0_SIZE;
+		remapRegLow = PCI_1_MEMORY0_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_1_MEMORY0_HIGH_ADDR_REMAP;
+		break;
+	case PCI_1_MEM1:
+		pciMemWindowBaseAddrReg = PCI_1_MEMORY1_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_1_MEMORY1_SIZE;
+		remapRegLow = PCI_1_MEMORY1_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_1_MEMORY1_HIGH_ADDR_REMAP;
+		break;
+	case PCI_1_MEM2:
+		pciMemWindowBaseAddrReg = PCI_1_MEMORY1_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_1_MEMORY1_SIZE;
+		remapRegLow = PCI_1_MEMORY1_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_1_MEMORY1_HIGH_ADDR_REMAP;
+		break;
+	case PCI_1_MEM3:
+		pciMemWindowBaseAddrReg = PCI_1_MEMORY3_BASE_ADDR;
+		pciMemWindowSizeReg = PCI_1_MEMORY3_SIZE;
+		remapRegLow = PCI_1_MEMORY3_LOW_ADDR_REMAP;
+		remapRegHigh = PCI_1_MEMORY3_HIGH_ADDR_REMAP;
+		break;
+#endif /* INCLUDE_PCI_1 */
+	default:
+		/* Retrun an invalid effective base address */
+		return 0xffffffff;
+	}
+	/* Writing the remap value to the remap regisers */
+	GT_REG_WRITE (remapRegHigh, remapValueHigh);
+	GT_REG_WRITE (remapRegLow, remapValueLow >> 16);
+	/* Reading the values from the base address and size registers */
+	baseAddrValue = GTREGREAD (pciMemWindowBaseAddrReg) & 0xfffff;
+	windowSizeValue = GTREGREAD (pciMemWindowSizeReg) & 0xffff;
+	/* Start calculating the effective Base Address */
+	effectiveBaseAddress = baseAddrValue << 16;
+	/* The effective base address will be combined from the chopped (if any)
+	   remap value (according to the size value and remap mechanism) and the
+	   window's base address */
+	effectiveBaseAddress |=
+		(((windowSizeValue << 16) | 0xffff) & remapValueLow);
+	/* If the effectiveBaseAddress exceed the window boundaries return an
+	   invalid value. */
+	if (effectiveBaseAddress >
+	    ((baseAddrValue << 16) + ((windowSizeValue << 16) | 0xffff)))
+		return 0xffffffff;
+	return effectiveBaseAddress;
+}
+
+/********************************************************************
+* memorySetRegionSnoopMode - This function modifys one of the 4 regions which
+*                            supports Cache Coherency.
+*
+*
+* Inputs: SNOOP_REGION region - One of the four regions.
+*         SNOOP_TYPE snoopType - There is four optional Types:
+*                               1. No Snoop.
+*                               2. Snoop to WT region.
+*                               3. Snoop to WB region.
+*                               4. Snoop & Invalidate to WB region.
+*         unsigned int baseAddress - Base Address of this region.
+*         unsigned int topAddress - Top Address of this region.
+* Returns: false if one of the parameters is wrong and true else
+*********************************************************************/
+/* evb6260 code */
+#if 0
+bool memorySetRegionSnoopMode(MEMORY_SNOOP_REGION region,
+			      MEMORY_SNOOP_TYPE snoopType,
+			      unsigned int baseAddress,
+			      unsigned int regionLength)
+{
+    unsigned int snoopXbaseAddress;
+    unsigned int snoopXtopAddress;
+    unsigned int data;
+    unsigned int snoopHigh = baseAddress + regionLength;
+
+    if( (region > MEM_SNOOP_REGION3) || (snoopType > MEM_SNOOP_WB) )
+	return false;
+    snoopXbaseAddress = SNOOP_BASE_ADDRESS_0 + 0x10 * region;
+    snoopXtopAddress = SNOOP_TOP_ADDRESS_0 + 0x10 * region;
+				 if(regionLength == 0) /* closing the region */
+    {
+	GT_REG_WRITE(snoopXbaseAddress,0x0000ffff);
+	GT_REG_WRITE(snoopXtopAddress,0);
+	return true;
+    }
+    baseAddress = baseAddress & 0xffff0000;
+    data = (baseAddress >> 16) | snoopType << 16;
+    GT_REG_WRITE(snoopXbaseAddress,data);
+    snoopHigh = (snoopHigh & 0xfff00000) >> 20;
+    GT_REG_WRITE(snoopXtopAddress,snoopHigh - 1);
+    return true;
+}
+#endif
+
+/********************************************************************
+* memoryRemapAddress - This fubction used for address remapping.
+*
+*
+* Inputs: regOffset: remap register
+*         remapValue :
+* Returns: false if one of the parameters is erroneous,true otherwise.
+*
+* Not needed function To_do !!!!
+*********************************************************************/
+bool memoryRemapAddress (unsigned int remapReg, unsigned int remapValue)
+{
+	unsigned int valueForReg;
+
+	valueForReg = (remapValue & 0xfff00000) >> 20;
+	GT_REG_WRITE (remapReg, valueForReg);
+	return true;
+}
+
+/*******************************************************************************
+* memoryGetDeviceParam - Extract the device parameters from the device bank
+*                          parameters register.
+*
+* DESCRIPTION:
+*       To allow interfacing with very slow devices and fast synchronous SRAMs,
+*       each device can be programed to different timing parameters. Each bank
+*       has its own parameters register. Bank width can be programmed to 8, 16,
+*       or 32-bits. Bank timing parameters can be programmed to support
+*       different device types (e.g. Sync Burst SRAM, Flash , ROM, I/O
+*       Controllers). The MV allows you to set timing parameters and width for
+*       each device through parameters register .
+*       This function extracts the parameters described from the Device Bank
+*       parameters register and fills the given 'deviceParam' (defined in
+*       gtMemory.h) structure with the read data.
+*
+* INPUT:
+*       deviceParam -  pointer to a structure DEVICE_PARAM (defined in
+*                      Memory.h).For details about each structure field please
+*                      see the device timing parameter section in the MV
+*                      datasheet.
+*       deviceNum  -   Select on of the five device banks (defined in
+*                      Memory.h) :
+*
+*                       - DEVICE0
+*                       - DEVICE1
+*                       - DEVICE2
+*                       - etc.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       false if one of the parameters is erroneous,true otherwise.
+*
+*******************************************************************************/
+/********************************************************************
+* memoryGetDeviceParam - This function used for getting device parameters from
+*                        DEVICE BANK PARAMETERS REGISTER
+*
+*
+* Inputs:        - deviceParam: STRUCT with paramiters for DEVICE BANK
+*                  PARAMETERS REGISTER
+*                - deviceNum : number of device
+* Returns: false if one of the parameters is erroneous,true otherwise.
+*********************************************************************/
+
+bool memoryGetDeviceParam (DEVICE_PARAM * deviceParam, DEVICE deviceNum)
+{
+	unsigned int valueOfReg;
+	unsigned int calcData;
+
+	if (deviceNum > 4)
+		return false;
+	GT_REG_READ (DEVICE_BANK0PARAMETERS + 4 * deviceNum, &valueOfReg);
+	calcData = (0x7 & valueOfReg) + ((BIT22 & valueOfReg) >> 19);
+	deviceParam->turnOff = calcData;	/* Turn Off */
+
+	calcData = ((0x78 & valueOfReg) >> 3) + ((BIT23 & valueOfReg) >> 19);
+	deviceParam->acc2First = calcData;	/* Access To First */
+
+	calcData = ((0x780 & valueOfReg) >> 7) + ((BIT24 & valueOfReg) >> 20);
+	deviceParam->acc2Next = calcData;	/* Access To Next */
+
+	calcData =
+		((0x3800 & valueOfReg) >> 11) + ((BIT25 & valueOfReg) >> 22);
+	deviceParam->ale2Wr = calcData;	/* Ale To Write */
+
+	calcData = ((0x1c000 & valueOfReg) >> 14) +
+		((BIT26 & valueOfReg) >> 23);
+	deviceParam->wrLow = calcData;	/* Write Active */
+
+	calcData = ((0xe0000 & valueOfReg) >> 17) +
+		((BIT27 & valueOfReg) >> 24);
+	deviceParam->wrHigh = calcData;	/* Write High */
+
+	calcData = ((0x300000 & valueOfReg) >> 20);
+	deviceParam->deviceWidth = (BIT0 << calcData);	/* In bytes */
+	calcData = ((0x30000000 & valueOfReg) >> 28);
+	deviceParam->badrSkew = calcData;	/* Cycles gap between BAdr
+						   toggle to read data sample. */
+	calcData = ((0x40000000 & valueOfReg) >> 30);
+	deviceParam->DPEn = calcData;	/*  Data Parity enable  */
+	return true;
+}
+
+/*******************************************************************************
+* memorySetDeviceParam - Set new parameters for a device.
+*
+*
+* DESCRIPTION:
+*       To allow interfacing with very slow devices and fast synchronous SRAMs,
+*       each device can be programed to different timing parameters. Each bank
+*       has its own parameters register. Bank width can be programmed to 8, 16,
+*       or 32-bits. Bank timing parameters can be programmed to support
+*       different device types (e.g. Sync Burst SRAM, Flash , ROM, I/O
+*       Controllers). The MV allows you to set timing parameters and width for
+*       each device through parameters register. This function set new
+*       parameters to a device Bank from the delivered structure 'deviceParam'
+*       (defined in gtMemory.h). The structure must be initialized with data
+*       prior to the use of these function.
+*
+* INPUT:
+*       deviceParam -  pointer to a structure DEVICE_PARAM (defined in
+*                      Memory.h).For details about each structure field please
+*                      see the device timing parameter section in the MV
+*                      datasheet.
+*       deviceNum  -   Select on of the five device banks (defined in
+*                      Memory.h) :
+*
+*                       - DEVICE0
+*                       - DEVICE1
+*                       - DEVICE2
+*                       - etc.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       false if one of the parameters is erroneous,true otherwise.
+*
+*******************************************************************************/
+/********************************************************************
+* memorySetDeviceParam - This function used for setting device parameters to
+*                        DEVICE BANK PARAMETERS REGISTER
+*
+*
+* Inputs:        - deviceParam: STRUCT for store paramiters from DEVICE BANK
+*                  PARAMETERS REGISTER
+*                - deviceNum : number of device
+* Returns: false if one of the parameters is erroneous,true otherwise.
+*********************************************************************/
+bool memorySetDeviceParam (DEVICE_PARAM * deviceParam, DEVICE deviceNum)
+{
+	unsigned int valueForReg;
+
+	if ((deviceParam->turnOff > 0x7) || (deviceParam->acc2First > 0xf) ||
+	    (deviceParam->acc2Next > 0xf) || (deviceParam->ale2Wr > 0x7) ||
+	    (deviceParam->wrLow > 0x7) || (deviceParam->wrHigh > 0x7) ||
+	    (deviceParam->badrSkew > 0x2) || (deviceParam->DPEn > 0x1)) {
+		return false;
+	}
+	valueForReg = (((deviceParam->turnOff) & 0x7) |
+		       (((deviceParam->turnOff) & 0x8) << 19) |
+		       (((deviceParam->acc2First) & 0xf) << 3) |
+		       (((deviceParam->acc2First) & 0x10) << 19) |
+		       (((deviceParam->acc2Next) & 0xf) << 7) |
+		       (((deviceParam->acc2Next) & 0x10) << 20) |
+		       (((deviceParam->ale2Wr) & 0x7) << 11) |
+		       (((deviceParam->ale2Wr) & 0xf) << 22) |
+		       (((deviceParam->wrLow) & 0x7) << 14) |
+		       (((deviceParam->wrLow) & 0xf) << 23) |
+		       (((deviceParam->wrHigh) & 0x7) << 17) |
+		       (((deviceParam->wrHigh) & 0xf) << 24) |
+		       (((deviceParam->badrSkew) & 0x3) << 28) |
+		       (((deviceParam->DPEn) & 0x1) << 30));
+
+	/* insert the device width: */
+	switch (deviceParam->deviceWidth) {
+	case 1:
+		valueForReg = valueForReg | _8BIT;
+		break;
+	case 2:
+		valueForReg = valueForReg | _16BIT;
+		break;
+	case 4:
+		valueForReg = valueForReg | _32BIT;
+		break;
+	default:
+		valueForReg = valueForReg | _8BIT;
+		break;
+	}
+	GT_REG_WRITE (DEVICE_BANK0PARAMETERS + 4 * deviceNum, valueForReg);
+	return true;
+}
+
+/*******************************************************************************
+* MemoryDisableWindow - Disable a memory space by the disable bit.
+* DESCRIPTION:
+*       This function disables one of the 21 availiable windows dedicated for
+*       the CPU decoding mechanism. Its possible to combine several windows with
+*       the OR command.
+* INPUT:
+*       window - One or more of the memory windows (defined in gtMemory.h).
+* OUTPUT:
+*       None.
+* RETURN:
+*       None.
+*******************************************************************************/
+void MemoryDisableWindow (MEMORY_WINDOW window)
+{
+	SET_REG_BITS (BASE_ADDR_ENABLE, window);
+}
+
+/*******************************************************************************
+* MemoryEnableWindow - Enable a memory space that was disabled by
+*                       'MemoryDisableWindow'.
+* DESCRIPTION:
+*       This function enables one of the 21 availiable windows dedicated for the
+*       CPU decoding mechanism. Its possible to combine several windows with the
+*       OR command.
+* INPUT:
+*       window - One or more of the memory windows (defined in gtMemory.h).
+* OUTPUT:
+*       None.
+* RETURN:
+*       None.
+*******************************************************************************/
+void MemoryEnableWindow (MEMORY_WINDOW window)
+{
+	RESET_REG_BITS (BASE_ADDR_ENABLE, window);
+}
+
+/*******************************************************************************
+* MemoryGetMemWindowStatus - This function check whether the memory window is
+*                              disabled or not.
+* DESCRIPTION:
+*       This function checks if the given memory window is closed .
+* INPUT:
+*       window - One or more of the memory windows (defined in gtMemory.h).
+* OUTPUT:
+*       None.
+* RETURN:
+*       True for a closed window, false otherwise .
+*******************************************************************************/
+MEMORY_WINDOW_STATUS MemoryGetMemWindowStatus (MEMORY_WINDOW window)
+{
+	if (GTREGREAD (BASE_ADDR_ENABLE) & window)
+		return MEM_WINDOW_DISABLED;
+	return MEM_WINDOW_ENABLED;
+}
diff --git a/board/Marvell/common/misc.S b/board/Marvell/common/misc.S
new file mode 100644
index 0000000000..41c3a9508e
--- /dev/null
+++ b/board/Marvell/common/misc.S
@@ -0,0 +1,235 @@
+#include <config.h>
+#include <74xx_7xx.h>
+#include "version.h"
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#include "../include/mv_gen_reg.h"
+
+#ifdef CONFIG_ECC
+	/* Galileo specific asm code for initializing ECC */
+	.globl board_relocate_rom
+board_relocate_rom:
+	mflr	r7
+	/* update the location of the GT registers */
+	lis	r11, CFG_GT_REGS@h
+	/* if we're using ECC, we must use the DMA engine to copy ourselves */
+	bl	start_idma_transfer_0
+	bl	wait_for_idma_0
+	bl	stop_idma_engine_0
+
+	mtlr	r7
+	blr
+
+	.globl board_init_ecc
+board_init_ecc:
+	mflr	r7
+	/* NOTE: r10 still contains the location we've been relocated to
+	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+
+	/* now that we're running from ram, init the rest of main memory
+	 * for ECC use */
+	lis	r8, CFG_MONITOR_LEN@h
+	ori	r8, r8, CFG_MONITOR_LEN@l
+
+	divw	r3, r10, r8
+
+	/* set up the counter, and init the starting address */
+	mtctr	r3
+	li	r12, 0
+
+	/* bytes per transfer */
+	mr	r5, r8
+about_to_init_ecc:
+1:	mr	r3, r12
+	mr	r4, r12
+	bl	start_idma_transfer_0
+	bl	wait_for_idma_0
+	bl	stop_idma_engine_0
+	add	r12, r12, r8
+	bdnz	1b
+
+	mtlr	r7
+	blr
+
+	/* r3:	dest addr
+	 * r4:	source addr
+	 * r5:	byte count
+	 * r11: gt regbase
+	 * trashes:	 r6, r5
+	 */
+start_idma_transfer_0:
+	/* set the byte count, including the OWN bit */
+	mr	r6, r11
+	ori	r6, r6, CHANNEL0_DMA_BYTE_COUNT
+	stwbrx	r5, 0, (r6)
+
+	/* set the source address */
+	mr	r6, r11
+	ori	r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
+	stwbrx	r4, 0, (r6)
+
+	/* set the dest address */
+	mr	r6, r11
+	ori	r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
+	stwbrx	r3, 0, (r6)
+
+	/* set the next record pointer */
+	li	r5, 0
+	mr	r6, r11
+	ori	r6, r6, CHANNEL0NEXT_RECORD_POINTER
+	stwbrx	r5, 0, (r6)
+
+	/* set the low control register */
+	/* bit 9 is NON chained mode, bit 31 is new style descriptors.
+	   bit 12 is channel enable */
+	ori	r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
+	/* 15 shifted by 16 (oris) == bit 31 */
+	oris	r5, r5, (1 << 15)
+	mr	r6, r11
+	ori	r6, r6, CHANNEL0CONTROL
+	stwbrx	r5, 0, (r6)
+
+	blr
+
+	/* this waits for the bytecount to return to zero, indicating
+	 * that the trasfer is complete */
+wait_for_idma_0:
+	mr	r5, r11
+	lis	r6, 0xff
+	ori	r6, r6, 0xffff
+	ori	r5, r5, CHANNEL0_DMA_BYTE_COUNT
+1:	lwbrx	r4, 0, (r5)
+	and.	r4, r4, r6
+	bne	1b
+
+	blr
+
+	/* this turns off channel 0 of the idma engine */
+stop_idma_engine_0:
+	/* shut off the DMA engine */
+	li	r5, 0
+	mr	r6, r11
+	ori	r6, r6, CHANNEL0CONTROL
+	stwbrx	r5, 0, (r6)
+
+	blr
+#endif
+
+#ifdef CFG_BOARD_ASM_INIT
+	/* NOTE: trashes r3-r7 */
+	.globl board_asm_init
+board_asm_init:
+	/* just move the GT registers to where they belong */
+	lis	r3, CFG_DFL_GT_REGS@h
+	ori	r3, r3, CFG_DFL_GT_REGS@l
+	lis	r4, CFG_GT_REGS@h
+	ori	r4, r4, CFG_GT_REGS@l
+	li	r5, INTERNAL_SPACE_DECODE
+
+	/* test to see if we've already moved */
+	lwbrx	r6, r5, r4
+	andi.	r6, r6, 0xffff
+	/* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
+/*	rlwinm	r7, r4, 8, 16, 31
+	rlwinm	r7, r4, 12, 16, 31	*/ /* original */
+	rlwinm	r7, r4, 16, 16, 31
+	/* -----------------------------------------------------*/
+	cmp	cr0, r7, r6
+	beqlr
+
+	/* nope, have to move the registers */
+	lwbrx	r6, r5, r3
+	andis.	r6, r6, 0xffff
+	or	r6, r6, r7
+	stwbrx	r6, r5, r3
+
+	/* now, poll for the change */
+1:	lwbrx	r7, r5, r4
+	cmp	cr0, r7, r6
+	bne	1b
+
+	/* done! */
+	blr
+#endif
+
+/* For use of the debug LEDs */
+	.global led_on0_relocated
+led_on0_relocated:
+	xor	r21, r21, r21
+	xor	r18, r18, r18
+	lis	r18, 0xFC80
+	ori	r18, r18, 0x8000
+	stw	r21, 0x0(r18)
+/*	  stw	  r18, 0x0(r18) */
+	sync
+	blr
+
+	.global led_off0_relocated
+led_off0_relocated:
+	xor	r21, r21, r21
+	xor	r18, r18, r18
+	lis	r18, 0xFC81
+	ori	r18, r18, 0x4000
+	stw	r21, 0x0(r18)
+/*	  stw	  r18, 0x0(r18) */
+	sync
+	blr
+
+	.global led_on0
+led_on0:
+	xor	r18, r18, r18
+	lis	r18, 0x1c80
+	ori	r18, r18, 0x8000
+	stw	r18, 0x0(r18)
+	sync
+	blr
+
+	.global led_off0
+led_off0:
+	xor	r18, r18, r18
+	lis	r18, 0x1c81
+	ori	r18, r18, 0x4000
+	stw	r18, 0x0(r18)
+	sync
+	blr
+
+	.global led_on1
+led_on1:
+	xor	r18, r18, r18
+	lis	r18, 0x1c80
+	ori	r18, r18, 0xc000
+	stw	r18, 0x0(r18)
+	sync
+	blr
+
+	.global led_off1
+led_off1:
+	xor	r18, r18, r18
+	lis	r18, 0x1c81
+	ori	r18, r18, 0x8000
+	stw	r18, 0x0(r18)
+	sync
+	blr
+
+	.global led_on2
+led_on2:
+	xor	r18, r18, r18
+	lis	r18, 0x1c81
+	ori	r18, r18, 0x0000
+	stw	r18, 0x0(r18)
+	sync
+	blr
+
+	.global led_off2
+led_off2:
+	xor	r18, r18, r18
+	lis	r18, 0x1c81
+	ori	r18, r18, 0xc000
+	stw	r18, 0x0(r18)
+	sync
+	blr
diff --git a/board/Marvell/common/ns16550.c b/board/Marvell/common/ns16550.c
new file mode 100644
index 0000000000..475445b788
--- /dev/null
+++ b/board/Marvell/common/ns16550.c
@@ -0,0 +1,66 @@
+/*
+ * COM1 NS16550 support
+ * originally from linux source (arch/ppc/boot/ns16550.c)
+ * modified to use CFG_ISA_MEM and new defines
+ *
+ * further modified by Josh Huber <huber@mclx.com> to support
+ * the DUART on the Galileo Eval board. (db64360)
+ */
+
+#include <config.h>
+#include "ns16550.h"
+
+#ifdef ZUMA_NTL
+/* no 16550 device */
+#else
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
+	(NS16550_t) (CFG_DUART_IO + 0x20)
+};
+
+volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
+{
+	volatile struct NS16550 *com_port;
+
+	com_port = (struct NS16550 *) COM_PORTS[chan];
+	com_port->ier = 0x00;
+	com_port->lcr = LCR_BKSE;	/* Access baud rate */
+	com_port->dll = baud_divisor & 0xff;	/* 9600 baud */
+	com_port->dlm = (baud_divisor >> 8) & 0xff;
+	com_port->lcr = LCR_8N1;	/* 8 data, 1 stop, no parity */
+	com_port->mcr = MCR_DTR | MCR_RTS;	/* RTS/DTR */
+
+	/* Clear & enable FIFOs */
+	com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;
+	return (com_port);
+}
+
+void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor)
+{
+	com_port->ier = 0x00;
+	com_port->lcr = LCR_BKSE;	/* Access baud rate */
+	com_port->dll = baud_divisor & 0xff;	/* 9600 baud */
+	com_port->dlm = (baud_divisor >> 8) & 0xff;
+	com_port->lcr = LCR_8N1;	/* 8 data, 1 stop, no parity */
+	com_port->mcr = MCR_DTR | MCR_RTS;	/* RTS/DTR */
+
+	/* Clear & enable FIFOs */
+	com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;
+}
+
+void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c)
+{
+	while ((com_port->lsr & LSR_THRE) == 0);
+	com_port->thr = c;
+}
+
+unsigned char NS16550_getc (volatile struct NS16550 *com_port)
+{
+	while ((com_port->lsr & LSR_DR) == 0);
+	return (com_port->rbr);
+}
+
+int NS16550_tstc (volatile struct NS16550 *com_port)
+{
+	return ((com_port->lsr & LSR_DR) != 0);
+}
+#endif
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
new file mode 100644
index 0000000000..f2ed2abc9e
--- /dev/null
+++ b/board/Marvell/common/ns16550.h
@@ -0,0 +1,102 @@
+/*
+ * NS16550 Serial Port
+ * originally from linux source (arch/ppc/boot/ns16550.h)
+ * modified slightly to
+ * have addresses as offsets from CFG_ISA_BASE
+ * added a few more definitions
+ * added prototypes for ns16550.c
+ * reduced no of com ports to 2
+ * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
+ *
+ * further modified to support the DUART in the Galileo eval board
+ * modifications (c) Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ */
+
+#ifndef __NS16550_H__
+#define __NS16550_H__
+
+/* the padding is necessary because on the galileo board the UART is
+   wired in with the 3 address lines shifted over by 2 bits */
+struct NS16550
+{
+	unsigned char rbr;  /* 0 = 0-3*/
+	int pad1:24;
+
+	unsigned char ier;  /* 1 = 4-7*/
+	int pad2:24;
+
+	unsigned char fcr;  /* 2 = 8-b*/
+	int pad3:24;
+
+	unsigned char lcr;  /* 3 = c-f*/
+	int pad4:24;
+
+	unsigned char mcr;  /* 4 = 10-13*/
+	int pad5:24;
+
+	unsigned char lsr;  /* 5 = 14-17*/
+	int pad6:24;
+
+	unsigned char msr;  /* 6 =18-1b*/
+	int pad7:24;
+
+	unsigned char scr;  /* 7 =1c-1f*/
+	int pad8:24;
+} __attribute__ ((packed));
+
+/* aliases */
+#define thr rbr
+#define iir fcr
+#define dll rbr
+#define dlm ier
+
+#define FCR_FIFO_EN     0x01    /*fifo enable*/
+#define FCR_RXSR        0x02    /*reciever soft reset*/
+#define FCR_TXSR        0x04    /*transmitter soft reset*/
+
+
+#define MCR_DTR         0x01
+#define MCR_RTS         0x02
+#define MCR_DMA_EN      0x04
+#define MCR_TX_DFR      0x08
+
+
+#define LCR_WLS_MSK 0x03    /* character length slect mask*/
+#define LCR_WLS_5   0x00    /* 5 bit character length */
+#define LCR_WLS_6   0x01    /* 6 bit character length */
+#define LCR_WLS_7   0x02    /* 7 bit character length */
+#define LCR_WLS_8   0x03    /* 8 bit character length */
+#define LCR_STB     0x04    /* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define LCR_PEN     0x08    /* Parity eneble*/
+#define LCR_EPS     0x10    /* Even Parity Select*/
+#define LCR_STKP    0x20    /* Stick Parity*/
+#define LCR_SBRK    0x40    /* Set Break*/
+#define LCR_BKSE    0x80    /* Bank select enable*/
+
+#define LSR_DR      0x01    /* Data ready */
+#define LSR_OE      0x02    /* Overrun */
+#define LSR_PE      0x04    /* Parity error */
+#define LSR_FE      0x08    /* Framing error */
+#define LSR_BI      0x10    /* Break */
+#define LSR_THRE    0x20    /* Xmit holding register empty */
+#define LSR_TEMT    0x40    /* Xmitter empty */
+#define LSR_ERR     0x80    /* Error */
+
+/* useful defaults for LCR*/
+#define LCR_8N1     0x03
+
+
+#define COM1 0x03F8
+#define COM2 0x02F8
+
+volatile struct NS16550 * NS16550_init(int chan, int baud_divisor);
+void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c);
+unsigned char NS16550_getc(volatile struct NS16550 *com_port);
+int NS16550_tstc(volatile struct NS16550 *com_port);
+void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
+
+typedef struct NS16550 *NS16550_t;
+
+extern const NS16550_t COM_PORTS[];
+
+#endif
diff --git a/board/Marvell/common/ppc_error_no.h b/board/Marvell/common/ppc_error_no.h
new file mode 100644
index 0000000000..53687c86bb
--- /dev/null
+++ b/board/Marvell/common/ppc_error_no.h
@@ -0,0 +1,164 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus
+ */
+#ifndef _MV_PPC_ERRNO_H
+#define _MV_PPC_ERRNO_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Arg list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+#define	EDEADLOCK	58	/* File locking deadlock error */
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+
+/* Should never be seen by user programs */
+#define ERESTARTSYS	512
+#define ERESTARTNOINTR	513
+#define ERESTARTNOHAND	514	/* restart if no handler.. */
+#define ENOIOCTLCMD	515	/* No ioctl command */
+
+#define _LAST_ERRNO	515
+
+#endif
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
new file mode 100644
index 0000000000..9d0d2138e2
--- /dev/null
+++ b/board/Marvell/common/serial.c
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * modified for marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * serial.c - serial support for the gal ev board
+ */
+
+/* supports both the 16650 duart and the MPSC */
+
+#include <common.h>
+#include <command.h>
+#include "../include/memory.h"
+#include "serial.h"
+
+#ifdef CONFIG_DB64360
+#include "../db64360/mpsc.h"
+#endif
+
+#ifdef CONFIG_DB64460
+#include "../db64460/mpsc.h"
+#endif
+
+#include "ns16550.h"
+
+#ifdef CONFIG_MPSC
+
+
+int serial_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+	int clock_divisor = 230400 / gd->baudrate;
+#endif
+
+	mpsc_init (gd->baudrate);
+
+	/* init the DUART chans so that KGDB in the kernel can use them */
+#ifdef CFG_INIT_CHAN1
+	NS16550_reinit (COM_PORTS[0], clock_divisor);
+#endif
+#ifdef CFG_INIT_CHAN2
+	NS16550_reinit (COM_PORTS[1], clock_divisor);
+#endif
+	return (0);
+}
+
+void serial_putc (const char c)
+{
+	if (c == '\n')
+		mpsc_putchar ('\r');
+
+	mpsc_putchar (c);
+}
+
+int serial_getc (void)
+{
+	return mpsc_getchar ();
+}
+
+int serial_tstc (void)
+{
+	return mpsc_test_char ();
+}
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
+}
+
+#else  /* ! CONFIG_MPSC */
+
+int serial_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int clock_divisor = 230400 / gd->baudrate;
+
+#ifdef CFG_INIT_CHAN1
+	(void) NS16550_init (0, clock_divisor);
+#endif
+#ifdef CFG_INIT_CHAN2
+	(void) NS16550_init (1, clock_divisor);
+#endif
+	return (0);
+}
+
+void serial_putc (const char c)
+{
+	if (c == '\n')
+		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+
+	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+}
+
+int serial_getc (void)
+{
+	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+}
+
+int serial_tstc (void)
+{
+	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+}
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int clock_divisor = 230400 / gd->baudrate;
+
+#ifdef CFG_INIT_CHAN1
+	NS16550_reinit (COM_PORTS[0], clock_divisor);
+#endif
+#ifdef CFG_INIT_CHAN2
+	NS16550_reinit (COM_PORTS[1], clock_divisor);
+#endif
+}
+
+#endif /* CONFIG_MPSC */
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+void kgdb_serial_init (void)
+{
+}
+
+void putDebugChar (int c)
+{
+	serial_putc (c);
+}
+
+void putDebugStr (const char *str)
+{
+	serial_puts (str);
+}
+
+int getDebugChar (void)
+{
+	return serial_getc ();
+}
+
+void kgdb_interruptible (int yes)
+{
+	return;
+}
+#endif /* CFG_CMD_KGDB */
diff --git a/board/Marvell/common/serial.h b/board/Marvell/common/serial.h
new file mode 100644
index 0000000000..c7fc8c162d
--- /dev/null
+++ b/board/Marvell/common/serial.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * modified for marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* serial.h - mostly useful for DUART serial_init in serial.c */
+
+#ifndef __SERIAL_H__
+#define __SERIAL_H__
+
+#if 0
+
+#define B230400         1
+#define B115200         2
+#define B57600          4
+#define B38400          82
+#define B19200          163
+#define B9600           24
+#define B4800           651
+#define B2400           1302
+#define B1200           2604
+#define B600            5208
+#define B300            10417
+#define B150            20833
+#define B110            28409
+#define BDEFAULT        B115200
+
+				/* this stuff is important to initialize
+				the DUART channels */
+
+#define	Scale		0x01L		/* distance between port addresses */
+#define	COM1		0x000003f8		/* Keyboard */
+#define COM2		0x000002f8		/* Host */
+
+
+/* Port Definitions relative to base COM port addresses */
+#define DataIn	(0x00*Scale)	/* data input port */
+#define DataOut	(0x00*Scale)	/* data output port */
+#define BaudLsb	(0x00*Scale)	/* baud rate divisor least significant byte */
+#define BaudMsb	(0x01*Scale)	/* baud rate divisor most significant byte */
+#define	Ier	(0x01*Scale)	/* interrupt enable register */
+#define	Iir	(0x02*Scale)	/* interrupt identification register */
+#define	Lcr	(0x03*Scale)	/* line control register */
+#define	Mcr	(0x04*Scale)	/* modem control register */
+#define	Lsr	(0x05*Scale)	/* line status register */
+#define	Msr	(0x06*Scale)	/* modem status register */
+
+/* Bit Definitions for above ports */
+#define LcrDlab	0x80	/* b7:	 enable baud rate divisor registers */
+#define	LcrDflt	0x03	/* b6-0: no parity, 1 stop, 8 data */
+
+#define	McrRts	0x02	/* b1:	request to send (I am ready to xmit) */
+#define	McrDtr	0x01	/* b0:	data terminal ready (I am alive ready to rcv) */
+#define	McrDflt	(McrRts|McrDtr)
+
+#define LsrTxD	0x6000	/* b5: transmit holding register empty (i.e. xmit OK!)*/
+			/* b6: transmitter empty */
+#define LsrRxD	0x0100	/* b0: received data ready (i.e. got a byte!) */
+
+#define	MsrRi	0x0040	/* b6: ring indicator (other guy is ready to rcv) */
+#define	MsrDsr	0x0020	/* b5: data set ready (other guy is alive ready to rcv */
+#define	MsrCts	0x0010	/* b4: clear to send (other guy is ready to rcv) */
+
+#define IerRda	0xf	/* b0: Enable received data available interrupt */
+
+#endif
+
+#endif /* __SERIAL_H__ */
diff --git a/board/Marvell/db64360/64360.h b/board/Marvell/db64360/64360.h
new file mode 100644
index 0000000000..a65e23be4e
--- /dev/null
+++ b/board/Marvell/db64360/64360.h
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * main board support/init for the Galileo Eval board DB64360.
+ */
+
+#ifndef __64360_H__
+#define __64360_H__
+
+/* CPU Configuration bits */
+#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
+#define	CPU_CONF_SINGLE_CPU	(1 << 11)
+#define	CPU_CONF_ENDIANESS	(1 << 12)
+#define CPU_CONF_PIPELINE	(1 << 13)
+#define CPU_CONF_STOP_RETRY	(1 << 17)
+#define CPU_CONF_MULTI_DECODE	(1 << 18)
+#define CPU_CONF_DP_VALID	(1 << 19)
+#define CPU_CONF_PERR_PROP	(1 << 22)
+#define CPU_CONF_AACK_DELAY_2	(1 << 25)
+#define CPU_CONF_AP_VALID	(1 << 26)
+#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
+
+/* CPU Master Control bits */
+#define CPU_MAST_CTL_ARB_EN	(1 << 8)
+#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
+#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
+#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
+#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
+#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
+
+#endif /* __64360_H__ */
diff --git a/board/Marvell/db64360/Makefile b/board/Marvell/db64360/Makefile
new file mode 100644
index 0000000000..768ccddbbf
--- /dev/null
+++ b/board/Marvell/db64360/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+SOBJS	= ../common/misc.o
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
+	  mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
+	  sdram_init.o ../common/intel_flash.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/Marvell/db64360/config.mk b/board/Marvell/db64360/config.mk
new file mode 100644
index 0000000000..0e42b48e17
--- /dev/null
+++ b/board/Marvell/db64360/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# EVB64360 boards
+#
+
+TEXT_BASE = 0xfff00000
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
new file mode 100644
index 0000000000..438700a50f
--- /dev/null
+++ b/board/Marvell/db64360/db64360.c
@@ -0,0 +1,936 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
+ */
+
+/*
+ * db64360.c - main board support/init for the Galileo Eval board.
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../include/memory.h"
+#include "../include/pci.h"
+#include "../include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "i2c.h"
+#include "64360.h"
+#include "mv_regs.h"
+
+#undef	DEBUG
+/*#define	DEBUG */
+
+#define	MAP_PCI
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+
+/* ------------------------------------------------------------------------- */
+
+/* this is the current GT register space location */
+/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+
+/* Unfortunately, we cant change it while we are in flash, so we initialize it
+ * to the "final" value. This means that any debug_led calls before
+ * board_pre_init wont work right (like in cpu_init_f).
+ * See also my_remap_gt_regs below. (NTL)
+ */
+
+void board_prebootm_init (void);
+unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+int display_mem_map (void);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * This is a version of the GT register space remapping function that
+ * doesn't touch globals (meaning, it's ok to run from flash.)
+ *
+ * Unfortunately, this has the side effect that a writable
+ * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
+ */
+
+void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
+{
+	u32 temp;
+
+	/* check and see if it's already moved */
+
+/* original ppcboot 1.1.6 source
+
+	temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
+	if ((temp & 0xffff) == new_loc >> 20)
+		return;
+
+	temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
+		0xffff0000) | (new_loc >> 20);
+
+	out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+	while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
+original ppcboot 1.1.6 source end */
+
+	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+	if ((temp & 0xffff) == new_loc >> 16)
+		return;
+
+	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+		0xffff0000) | (new_loc >> 16);
+
+	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
+}
+
+#ifdef CONFIG_PCI
+
+static void gt_pci_config (void)
+{
+	unsigned int stat;
+	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
+
+	/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
+	 * config registers by writing ones to the bus and device.
+	 * We then update the Virtual register with the correct value for the bus and device.
+	 */
+	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
+		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+
+		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
+			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+
+	}
+	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
+		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
+			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+	}
+
+	/* Enable master */
+	PCI_MASTER_ENABLE (0, SELF);
+	PCI_MASTER_ENABLE (1, SELF);
+
+	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
+	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
+	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
+									     <<
+									     18);
+	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
+	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
+
+	/* ronen- add write to pci remap registers for 64460.
+	   in 64360 when writing to pci base go and overide remap automaticaly,
+	   in 64460 it doesn't */
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+
+	/* PCI interface settings */
+	/* Timeout set to retry forever */
+	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
+	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
+
+	/* ronen - enable only CS0 and Internal reg!! */
+	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+
+/*ronen update the pci internal registers base address.*/
+#ifdef MAP_PCI
+	for (stat = 0; stat <= PCI_HOST1; stat++)
+		pciWriteConfigReg (stat,
+				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
+				   SELF, CFG_GT_REGS);
+#endif
+
+}
+#endif
+
+/* Setup CPU interface paramaters */
+static void gt_cpu_config (void)
+{
+	cpu_t cpu = get_cpu_type ();
+	ulong tmp;
+
+	/* cpu configuration register */
+	tmp = GTREGREAD (CPU_CONFIGURATION);
+
+	/* set the SINGLE_CPU bit  see MV64360 P.399 */
+#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+	tmp |= CPU_CONF_SINGLE_CPU;
+#endif
+
+	tmp &= ~CPU_CONF_AACK_DELAY_2;
+
+	tmp |= CPU_CONF_DP_VALID;
+	tmp |= CPU_CONF_AP_VALID;
+
+	tmp |= CPU_CONF_PIPELINE;
+
+	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
+
+	/* CPU master control register */
+	tmp = GTREGREAD (CPU_MASTER_CONTROL);
+
+	tmp |= CPU_MAST_CTL_ARB_EN;
+
+	if ((cpu == CPU_7400) ||
+	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
+
+		tmp |= CPU_MAST_CTL_CLEAN_BLK;
+		tmp |= CPU_MAST_CTL_FLUSH_BLK;
+
+	} else {
+		/* cleanblock must be cleared for CPUs
+		 * that do not support this command (603e, 750)
+		 * see Res#1 */
+		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
+		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
+	}
+	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
+}
+
+/*
+ * board_pre_init.
+ *
+ * set up gal. device mappings, etc.
+ */
+int board_pre_init (void)
+{
+	uchar sram_boot = 0;
+
+	/*
+	 * set up the GT the way the kernel wants it
+	 * the call to move the GT register space will obviously
+	 * fail if it has already been done, but we're going to assume
+	 * that if it's not at the power-on location, it's where we put
+	 * it last time. (huber)
+	 */
+
+	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+
+	/* No PCI in first release of Port To_do: enable it. */
+#ifdef CONFIG_PCI
+	gt_pci_config ();
+#endif
+	/* mask all external interrupt sources */
+	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
+	/* new in MV6436x */
+	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
+	/* --------------------- */
+	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+	/* does not exist in MV6436x
+	   GT_REG_WRITE(CPU_INT_0_MASK, 0);
+	   GT_REG_WRITE(CPU_INT_1_MASK, 0);
+	   GT_REG_WRITE(CPU_INT_2_MASK, 0);
+	   GT_REG_WRITE(CPU_INT_3_MASK, 0);
+	   --------------------- */
+
+
+	/* ----- DEVICE BUS SETTINGS ------ */
+
+	/*
+	 * EVB
+	 * 0 - SRAM   ????
+	 * 1 - RTC      ????
+	 * 2 - UART     ????
+	 * 3 - Flash    checked 32Bit Intel Strata
+	 * boot - BootCS checked 8Bit 29LV040B
+	 *
+	 * Zuma
+	 * 0 - Flash
+	 * boot - BootCS
+	 */
+
+	/*
+	 * the dual 7450 module requires burst access to the boot
+	 * device, so the serial rom copies the boot device to the
+	 * on-board sram on the eval board, and updates the correct
+	 * registers to boot from the sram. (device0)
+	 */
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+		sram_boot = 1;
+	if (!sram_boot)
+		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+
+	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+
+
+	/* configure device timing */
+#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+	if (!sram_boot)
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+#endif
+
+#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#endif
+#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#endif
+
+#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+	/* detect if we are booting from the 32 bit flash */
+	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
+		/* 32 bit boot flash */
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
+			      CFG_32BIT_BOOT_PAR);
+	} else {
+		/* 8 bit boot flash */
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+	}
+#else
+	/* 8 bit boot flash only */
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+#endif
+
+
+	gt_cpu_config ();
+
+	/* MPP setup */
+	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	DEBUG_LED0_ON ();
+	DEBUG_LED1_ON ();
+	DEBUG_LED2_ON ();
+
+	return 0;
+}
+
+/* various things to do after relocation */
+
+int misc_init_r ()
+{
+	icache_enable ();
+#ifdef CFG_L2
+	l2cache_enable ();
+#endif
+#ifdef CONFIG_MPSC
+
+	mpsc_sdma_init ();
+	mpsc_init2 ();
+#endif
+
+#if 0
+	/* disable the dcache and MMU */
+	dcache_lock ();
+#endif
+	return 0;
+}
+
+void after_reloc (ulong dest_addr, gd_t * gd)
+{
+	/* check to see if we booted from the sram.  If so, move things
+	 * back to the way they should be. (we're running from main
+	 * memory at this point now */
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	}
+	display_mem_map ();
+	/* now, jump to the main ppcboot board init code */
+	board_init_r (gd, dest_addr);
+	/* NOTREACHED */
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ *
+ * right now, assume borad type. (there is just one...after all)
+ */
+
+int checkboard (void)
+{
+	int l_type = 0;
+
+	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	return (l_type);
+}
+
+/* utility functions */
+void debug_led (int led, int mode)
+{
+	volatile int *addr = 0;
+	int dummy;
+
+	if (mode == 1) {
+		switch (led) {
+		case 0:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x08000);
+			break;
+
+		case 1:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x0c000);
+			break;
+
+		case 2:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x10000);
+			break;
+		}
+	} else if (mode == 0) {
+		switch (led) {
+		case 0:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x14000);
+			break;
+
+		case 1:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x18000);
+			break;
+
+		case 2:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x1c000);
+			break;
+		}
+	}
+
+	dummy = *addr;
+}
+
+int display_mem_map (void)
+{
+	int i, j;
+	unsigned int base, size, width;
+
+	/* SDRAM */
+	printf ("SD (DDR) RAM\n");
+	for (i = 0; i <= BANK3; i++) {
+		base = memoryGetBankBaseAddress (i);
+		size = memoryGetBankSize (i);
+		if (size != 0) {
+			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
+				i, base, size >> 20);
+		}
+	}
+
+	/* CPU's PCI windows */
+	for (i = 0; i <= PCI_HOST1; i++) {
+		printf ("\nCPU's PCI %d windows\n", i);
+		base = pciGetSpaceBase (i, PCI_IO);
+		size = pciGetSpaceSize (i, PCI_IO);
+		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
+			size >> 20);
+		for (j = 0;
+		     j <=
+		     PCI_REGION0
+		     /*ronen currently only first PCI MEM is used 3 */ ;
+		     j++) {
+			base = pciGetSpaceBase (i, j);
+			size = pciGetSpaceSize (i, j);
+			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
+		}
+	}
+
+	/* Devices */
+	printf ("\nDEVICES\n");
+	for (i = 0; i <= DEVICE3; i++) {
+		base = memoryGetDeviceBaseAddress (i);
+		size = memoryGetDeviceSize (i);
+		width = memoryGetDeviceWidth (i) * 8;
+		printf ("DEV %d:  base - 0x%08x  size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
+		if (i == 0)
+			printf ("\t- EXT SRAM (actual - 1M)\n");
+		else if (i == 1)
+			printf ("\t- RTC\n");
+		else if (i == 2)
+			printf ("\t- UART\n");
+		else
+			printf ("\t- LARGE FLASH\n");
+	}
+
+	/* Bootrom */
+	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
+	size = memoryGetDeviceSize (BOOT_DEVICE);
+	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
+	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\n",
+		base, size >> 20, width);
+	return (0);
+}
+
+/* DRAM check routines copied from gw8260 */
+
+#if defined (CFG_DRAM_TEST)
+
+/*********************************************************************/
+/* NAME:  move64() -  moves a double word (64-bit)		     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   this function performs a double word move from the data at	     */
+/*   the source pointer to the location at the destination pointer.  */
+/*								     */
+/* INPUTS:							     */
+/*   unsigned long long *src  - pointer to data to move		     */
+/*								     */
+/* OUTPUTS:							     */
+/*   unsigned long long *dest - pointer to locate to move data	     */
+/*								     */
+/* RETURNS:							     */
+/*   None							     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*   May cloober fr0.						     */
+/*								     */
+/*********************************************************************/
+static void move64 (unsigned long long *src, unsigned long long *dest)
+{
+	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
+	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
+      : : : "fr0");		/* Clobbers fr0         */
+	return;
+}
+
+
+#if defined (CFG_DRAM_TEST_DATA)
+
+unsigned long long pattern[] = {
+	0xaaaaaaaaaaaaaaaa,
+	0xcccccccccccccccc,
+	0xf0f0f0f0f0f0f0f0,
+	0xff00ff00ff00ff00,
+	0xffff0000ffff0000,
+	0xffffffff00000000,
+	0x00000000ffffffff,
+	0x0000ffff0000ffff,
+	0x00ff00ff00ff00ff,
+	0x0f0f0f0f0f0f0f0f,
+	0x3333333333333333,
+	0x5555555555555555
+};
+
+/*********************************************************************/
+/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Tests data lines for shorts and opens by forcing adjacent data  */
+/*   to opposite states. Because the data lines could be routed in   */
+/*   an arbitrary manner the must ensure test patterns ensure that   */
+/*   every case is tested. By using the following series of binary   */
+/*   patterns every combination of adjacent bits is test regardless  */
+/*   of routing.						     */
+/*								     */
+/*     ...101010101010101010101010				     */
+/*     ...110011001100110011001100				     */
+/*     ...111100001111000011110000				     */
+/*     ...111111110000000011111111				     */
+/*								     */
+/*   Carrying this out, gives us six hex patterns as follows:	     */
+/*								     */
+/*     0xaaaaaaaaaaaaaaaa					     */
+/*     0xcccccccccccccccc					     */
+/*     0xf0f0f0f0f0f0f0f0					     */
+/*     0xff00ff00ff00ff00					     */
+/*     0xffff0000ffff0000					     */
+/*     0xffffffff00000000					     */
+/*								     */
+/*   The number test patterns will always be given by:		     */
+/*								     */
+/*   log(base 2)(number data bits) = log2 (64) = 6		     */
+/*								     */
+/*   To test for short and opens to other signals on our boards. we  */
+/*   simply							     */
+/*   test with the 1's complemnt of the paterns as well.	     */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays failing test pattern				     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*  Assumes only one one SDRAM bank				     */
+/*								     */
+/*********************************************************************/
+int mem_test_data (void)
+{
+	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long temp64;
+	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
+	int i;
+	unsigned int hi, lo;
+
+	for (i = 0; i < num_patterns; i++) {
+		move64 (&(pattern[i]), pmem);
+		move64 (pmem, &temp64);
+
+		/* hi = (temp64>>32) & 0xffffffff;          */
+		/* lo = temp64 & 0xffffffff;                */
+		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+
+		hi = (pattern[i] >> 32) & 0xffffffff;
+		lo = pattern[i] & 0xffffffff;
+		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
+
+		if (temp64 != pattern[i]) {
+			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
+				hi, lo);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+#endif /* CFG_DRAM_TEST_DATA */
+
+#if defined (CFG_DRAM_TEST_ADDRESS)
+/*********************************************************************/
+/* NAME:  mem_test_address() -	test address lines		     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   This function performs a test to verify that each word im	     */
+/*   memory is uniquly addressable. The test sequence is as follows: */
+/*								     */
+/*   1) write the address of each word to each word.		     */
+/*   2) verify that each location equals its address		     */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays failing test pattern and address			     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int mem_test_address (void)
+{
+	volatile unsigned int *pmem =
+		(volatile unsigned int *) CFG_MEMTEST_START;
+	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+	unsigned int i;
+
+	/* write address to each location */
+	for (i = 0; i < size; i++) {
+		pmem[i] = i;
+	}
+
+	/* verify each loaction */
+	for (i = 0; i < size; i++) {
+		if (pmem[i] != i) {
+			printf ("\n   Address Test Failed at 0x%x", i);
+			return 1;
+		}
+	}
+	return 0;
+}
+#endif /* CFG_DRAM_TEST_ADDRESS */
+
+#if defined (CFG_DRAM_TEST_WALK)
+/*********************************************************************/
+/* NAME:   mem_march() -  memory march				     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Marches up through memory. At each location verifies rmask if   */
+/*   read = 1. At each location write wmask if	write = 1. Displays  */
+/*   failing address and pattern.				     */
+/*								     */
+/* INPUTS:							     */
+/*   volatile unsigned long long * base - start address of test	     */
+/*   unsigned int size - number of dwords(64-bit) to test	     */
+/*   unsigned long long rmask - read verify mask		     */
+/*   unsigned long long wmask - wrtie verify mask		     */
+/*   short read - verifies rmask if read = 1			     */
+/*   short write  - writes wmask if write = 1			     */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays failing test pattern and address			     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int mem_march (volatile unsigned long long *base,
+	       unsigned int size,
+	       unsigned long long rmask,
+	       unsigned long long wmask, short read, short write)
+{
+	unsigned int i;
+	unsigned long long temp;
+	unsigned int hitemp, lotemp, himask, lomask;
+
+	for (i = 0; i < size; i++) {
+		if (read != 0) {
+			/* temp = base[i]; */
+			move64 ((unsigned long long *) &(base[i]), &temp);
+			if (rmask != temp) {
+				hitemp = (temp >> 32) & 0xffffffff;
+				lotemp = temp & 0xffffffff;
+				himask = (rmask >> 32) & 0xffffffff;
+				lomask = rmask & 0xffffffff;
+
+				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
+				return 1;
+			}
+		}
+		if (write != 0) {
+			/*  base[i] = wmask; */
+			move64 (&wmask, (unsigned long long *) &(base[i]));
+		}
+	}
+	return 0;
+}
+#endif /* CFG_DRAM_TEST_WALK */
+
+/*********************************************************************/
+/* NAME:   mem_test_walk() -  a simple walking ones test	     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Performs a walking ones through entire physical memory. The     */
+/*   test uses as series of memory marches, mem_march(), to verify   */
+/*   and write the test patterns to memory. The test sequence is as  */
+/*   follows:							     */
+/*     1) march writing 0000...0001				     */
+/*     2) march verifying 0000...0001  , writing  0000...0010	     */
+/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
+/*	   the write mask equals 1000...0000			     */
+/*     4) march verifying 1000...0000				     */
+/*   The test fails if any of the memory marches return a failure.   */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays which pass on the memory test is executing	     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int mem_test_walk (void)
+{
+	unsigned long long mask;
+	volatile unsigned long long *pmem =
+		(volatile unsigned long long *) CFG_MEMTEST_START;
+	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+
+	unsigned int i;
+
+	mask = 0x01;
+
+	printf ("Initial Pass");
+	mem_march (pmem, size, 0x0, 0x1, 0, 1);
+
+	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+	printf ("		");
+	printf ("         ");
+	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+	for (i = 0; i < 63; i++) {
+		printf ("Pass %2d", i + 2);
+		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
+			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
+			return 1;
+		}
+		mask = mask << 1;
+		printf ("\b\b\b\b\b\b\b");
+	}
+
+	printf ("Last Pass");
+	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
+		/* printf("mask: 0x%x", mask); */
+		return 1;
+	}
+	printf ("\b\b\b\b\b\b\b\b\b");
+	printf ("	     ");
+	printf ("\b\b\b\b\b\b\b\b\b");
+
+	return 0;
+}
+
+/*********************************************************************/
+/* NAME:    testdram() -  calls any enabled memory tests	     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Runs memory tests if the environment test variables are set to  */
+/*   'y'.							     */
+/*								     */
+/* INPUTS:							     */
+/*   testdramdata    - If set to 'y', data test is run.		     */
+/*   testdramaddress - If set to 'y', address test is run.	     */
+/*   testdramwalk    - If set to 'y', walking ones test is run	     */
+/*								     */
+/* OUTPUTS:							     */
+/*   None							     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int testdram (void)
+{
+	char *s;
+	int rundata, runaddress, runwalk;
+
+	s = getenv ("testdramdata");
+	rundata = (s && (*s == 'y')) ? 1 : 0;
+	s = getenv ("testdramaddress");
+	runaddress = (s && (*s == 'y')) ? 1 : 0;
+	s = getenv ("testdramwalk");
+	runwalk = (s && (*s == 'y')) ? 1 : 0;
+
+/*    rundata = 1; */
+/*    runaddress = 0; */
+/*    runwalk = 0; */
+
+	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+	}
+#ifdef CFG_DRAM_TEST_DATA
+	if (rundata == 1) {
+		printf ("Test DATA ...  ");
+		if (mem_test_data () == 1) {
+			printf ("failed \n");
+			return 1;
+		} else
+			printf ("ok \n");
+	}
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+	if (runaddress == 1) {
+		printf ("Test ADDRESS ...  ");
+		if (mem_test_address () == 1) {
+			printf ("failed \n");
+			return 1;
+		} else
+			printf ("ok \n");
+	}
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+	if (runwalk == 1) {
+		printf ("Test WALKING ONEs ...  ");
+		if (mem_test_walk () == 1) {
+			printf ("failed \n");
+			return 1;
+		} else
+			printf ("ok \n");
+	}
+#endif
+	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+		printf ("passed\n");
+	}
+	return 0;
+
+}
+#endif /* CFG_DRAM_TEST */
+
+/* ronen - the below functions are used by the bootm function           */
+/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
+/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
+/*    the kernel data areas.                                            */
+/*  - we diable and invalidate the icache and dcache.                   */
+void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
+{
+	u32 temp;
+
+	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+	if ((temp & 0xffff) == new_loc >> 16)
+		return;
+
+	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+		0xffff0000) | (new_loc >> 16);
+
+	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
+							new_loc |
+							(INTERNAL_SPACE_DECODE)))))
+	       != temp);
+
+}
+
+void board_prebootm_init ()
+{
+
+/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
+		GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
+
+/* Stop GigE Rx DMA engines */
+	GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
+	GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00);
+/* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */
+
+/* Relocate MV64360 internal regs */
+	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+
+	icache_disable ();
+	invalidate_l1_instruction_cache ();
+	flush_data_cache ();
+	dcache_disable ();
+}
diff --git a/board/Marvell/db64360/eth.h b/board/Marvell/db64360/eth.h
new file mode 100644
index 0000000000..aab32d2a5a
--- /dev/null
+++ b/board/Marvell/db64360/eth.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __EVB64360_ETH_H__
+#define __EVB64360_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+
+
+int db64360_eth0_poll(void);
+int db64360_eth0_transmit(unsigned int s, volatile char *p);
+void db64360_eth0_disable(void);
+bool network_start(bd_t *bis);
+
+
+#endif /* __EVB64360_ETH_H__ */
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
new file mode 100644
index 0000000000..ccb3adc66c
--- /dev/null
+++ b/board/Marvell/db64360/mpsc.c
@@ -0,0 +1,1019 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+  ************************************************************************/
+
+/*
+ * mpsc.c - driver for console over the MPSC.
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <asm/cache.h>
+
+#include <malloc.h>
+#include "mpsc.h"
+
+#include "mv_regs.h"
+
+#include "../include/memory.h"
+
+/* Define this if you wish to use the MPSC as a register based UART.
+ * This will force the serial port to not use the SDMA engine at all.
+ */
+#undef CONFIG_MPSC_DEBUG_PORT
+
+
+int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
+char (*mpsc_getchar) (void) = mpsc_getchar_debug;
+int (*mpsc_test_char) (void) = mpsc_test_char_debug;
+
+
+static volatile unsigned int *rx_desc_base = NULL;
+static unsigned int rx_desc_index = 0;
+static volatile unsigned int *tx_desc_base = NULL;
+static unsigned int tx_desc_index = 0;
+
+/* local function declarations */
+static int galmpsc_connect (int channel, int connect);
+static int galmpsc_route_rx_clock (int channel, int brg);
+static int galmpsc_route_tx_clock (int channel, int brg);
+static int galmpsc_write_config_regs (int mpsc, int mode);
+static int galmpsc_config_channel_regs (int mpsc);
+static int galmpsc_set_char_length (int mpsc, int value);
+static int galmpsc_set_stop_bit_length (int mpsc, int value);
+static int galmpsc_set_parity (int mpsc, int value);
+static int galmpsc_enter_hunt (int mpsc);
+static int galmpsc_set_brkcnt (int mpsc, int value);
+static int galmpsc_set_tcschar (int mpsc, int value);
+static int galmpsc_set_snoop (int mpsc, int value);
+static int galmpsc_shutdown (int mpsc);
+
+static int galsdma_set_RFT (int channel);
+static int galsdma_set_SFM (int channel);
+static int galsdma_set_rxle (int channel);
+static int galsdma_set_txle (int channel);
+static int galsdma_set_burstsize (int channel, unsigned int value);
+static int galsdma_set_RC (int channel, unsigned int value);
+
+static int galbrg_set_CDV (int channel, int value);
+static int galbrg_enable (int channel);
+static int galbrg_disable (int channel);
+static int galbrg_set_clksrc (int channel, int value);
+static int galbrg_set_CUV (int channel, int value);
+
+static void galsdma_enable_rx (void);
+static int galsdma_set_mem_space (unsigned int memSpace,
+				  unsigned int memSpaceTarget,
+				  unsigned int memSpaceAttr,
+				  unsigned int baseAddress,
+				  unsigned int size);
+
+
+#define SOFTWARE_CACHE_MANAGEMENT
+
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
+#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
+#else
+#define FLUSH_DCACHE(a,b)
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
+#define INVALIDATE_DCACHE(a,b)
+#endif
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+static void mpsc_debug_init (void)
+{
+
+	volatile unsigned int temp;
+
+	/* Clear the CFR  (CHR4) */
+	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
+	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&".  Assuming "= &"
+
+REG_GAP));
+	temp &= 0xffffff00;
+	temp |= BIT29;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
+		      temp);
+
+	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
+	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
+	temp |= (BIT12 | BIT15);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
+		      temp);
+
+	/* Set int mask */
+	temp = GTREGREAD (GALMPSC_0_INT_MASK);
+	temp |= BIT6;
+	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
+}
+#endif
+
+char mpsc_getchar_debug (void)
+{
+	volatile int temp;
+	volatile unsigned int cause;
+
+	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+	while ((cause & BIT6) == 0) {
+		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+	}
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
+			  (CHANNEL * GALMPSC_REG_GAP));
+	/* By writing 1's to the set bits, the register is cleared */
+	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
+		      temp);
+	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
+	return (temp >> 16) & 0xff;
+}
+
+/* special function for running out of flash.  doesn't modify any
+ * global variables [josh] */
+int mpsc_putchar_early (char ch)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int mpsc = CHANNEL;
+	int temp =
+		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	galmpsc_set_tcschar (mpsc, ch);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
+		      temp | 0x200);
+
+#define MAGIC_FACTOR	(10*1000000)
+
+	udelay (MAGIC_FACTOR / gd->baudrate);
+	return 0;
+}
+
+/* This is used after relocation, see serial.c and mpsc_init2 */
+static int mpsc_putchar_sdma (char ch)
+{
+	volatile unsigned int *p;
+	unsigned int temp;
+
+
+	/* align the descriptor */
+	p = tx_desc_base;
+	memset ((void *) p, 0, 8 * sizeof (unsigned int));
+
+	/* fill one 64 bit buffer */
+	/* word swap, pad with 0 */
+	p[4] = 0;		/* x */
+	p[5] = (unsigned int) ch;	/* x */
+
+	/* CHANGED completely according to GT64260A dox - NTL */
+	p[0] = 0x00010001;	/* 0 */
+	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
+	p[2] = 0;		/* 8 */
+	p[3] = (unsigned int) &p[4];	/* c */
+
+#if 0
+	p[9] = DESC_FIRST | DESC_LAST;
+	p[10] = (unsigned int) &p[0];
+	p[11] = (unsigned int) &p[12];
+#endif
+
+	FLUSH_DCACHE (&p[0], &p[8]);
+
+	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+		      (unsigned int) &p[0]);
+	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+		      (unsigned int) &p[0]);
+
+	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+	temp |= (TX_DEMAND | TX_STOP);
+	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+	INVALIDATE_DCACHE (&p[1], &p[2]);
+
+	while (p[1] & DESC_OWNER_BIT) {
+		udelay (100);
+		INVALIDATE_DCACHE (&p[1], &p[2]);
+	}
+	return 0;
+}
+
+char mpsc_getchar_sdma (void)
+{
+	static unsigned int done = 0;
+	volatile char ch;
+	unsigned int len = 0, idx = 0, temp;
+
+	volatile unsigned int *p;
+
+
+	do {
+		p = &rx_desc_base[rx_desc_index * 8];
+
+		INVALIDATE_DCACHE (&p[0], &p[1]);
+		/* Wait for character */
+		while (p[1] & DESC_OWNER_BIT) {
+			udelay (100);
+			INVALIDATE_DCACHE (&p[0], &p[1]);
+		}
+
+		/* Handle error case */
+		if (p[1] & (1 << 15)) {
+			printf ("oops, error: %08x\n", p[1]);
+
+			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
+					  (CHANNEL * GALMPSC_REG_GAP));
+			temp |= (1 << 23);
+			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
+				      (CHANNEL * GALMPSC_REG_GAP), temp);
+
+			/* Can't poll on abort bit, so we just wait. */
+			udelay (100);
+
+			galsdma_enable_rx ();
+		}
+
+		/* Number of bytes left in this descriptor */
+		len = p[0] & 0xffff;
+
+		if (len) {
+			/* Where to look */
+			idx = 5;
+			if (done > 3)
+				idx = 4;
+			if (done > 7)
+				idx = 7;
+			if (done > 11)
+				idx = 6;
+
+			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
+			ch = p[idx] & 0xff;
+			done++;
+		}
+
+		if (done < len) {
+			/* this descriptor has more bytes still
+			 * shift down the char we just read, and leave the
+			 * buffer in place for the next time around
+			 */
+			p[idx] = p[idx] >> 8;
+			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
+		}
+
+		if (done == len) {
+			/* nothing left in this descriptor.
+			 * go to next one
+			 */
+			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+			p[0] = 0x00100000;
+			FLUSH_DCACHE (&p[0], &p[1]);
+			/* Next descriptor */
+			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+			done = 0;
+		}
+	} while (len == 0);	/* galileo bug.. len might be zero */
+
+	return ch;
+}
+
+
+int mpsc_test_char_debug (void)
+{
+	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
+		return 0;
+	else {
+		return 1;
+	}
+}
+
+
+int mpsc_test_char_sdma (void)
+{
+	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
+
+	INVALIDATE_DCACHE (&p[1], &p[2]);
+
+	if (p[1] & DESC_OWNER_BIT)
+		return 0;
+	else
+		return 1;
+}
+
+int mpsc_init (int baud)
+{
+	/* BRG CONFIG */
+	galbrg_set_baudrate (CHANNEL, baud);
+	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
+	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
+	galbrg_enable (CHANNEL);	/* Enable BRG */
+
+	/* Set up clock routing */
+	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
+
+	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
+	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
+
+	/* reset MPSC state */
+	galmpsc_shutdown (CHANNEL);
+
+	/* SDMA CONFIG */
+	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
+	galsdma_set_txle (CHANNEL);
+	galsdma_set_rxle (CHANNEL);
+	galsdma_set_RC (CHANNEL, 0xf);
+	galsdma_set_SFM (CHANNEL);
+	galsdma_set_RFT (CHANNEL);
+
+	/* MPSC CONFIG */
+	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
+	galmpsc_config_channel_regs (CHANNEL);
+	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
+	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
+	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+	mpsc_debug_init ();
+#endif
+
+	/* COMM_MPSC CONFIG */
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
+#else
+	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
+#endif
+
+	return 0;
+}
+
+
+void mpsc_sdma_init (void)
+{
+/* Setup SDMA channel0 SDMA_CONFIG_REG*/
+	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
+
+/*  Enable MPSC-Window0 for DRAM Bank0   */
+	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT,
+				   MV64360_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_0_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK0)) != true)
+		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
+			__FUNCTION__);
+
+
+/*  Disable MPSC-Window1    */
+	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_1_BIT,
+				   MV64360_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_1_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK3)) != true)
+		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
+			__FUNCTION__);
+
+
+/*  Disable MPSC-Window2 */
+	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_2_BIT,
+				   MV64360_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_2_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK3)) != true)
+		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
+			__FUNCTION__);
+
+
+/*  Disable MPSC-Window3 */
+	if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_3_BIT,
+				   MV64360_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_3_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK3)) != true)
+		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
+			__FUNCTION__);
+
+/*  Setup MPSC0 access mode Window0 full access */
+	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
+			 (MV64360_SDMA_WIN_ACCESS_FULL <<
+			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+/*  Setup MPSC1 access mode Window1 full access */
+	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
+			 (MV64360_SDMA_WIN_ACCESS_FULL <<
+			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+/* Setup MPSC internal address space base address 	*/
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+
+/* no high address remap*/
+	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
+	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
+
+/* clear interrupt cause register for MPSC (fault register)*/
+	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
+}
+
+
+void mpsc_init2 (void)
+{
+	int i;
+
+#ifndef CONFIG_MPSC_DEBUG_PORT
+	mpsc_putchar = mpsc_putchar_sdma;
+	mpsc_getchar = mpsc_getchar_sdma;
+	mpsc_test_char = mpsc_test_char_sdma;
+#endif
+	/* RX descriptors */
+	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
+						sizeof (unsigned int));
+
+	/* align descriptors */
+	rx_desc_base = (unsigned int *)
+		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
+
+	rx_desc_index = 0;
+
+	memset ((void *) rx_desc_base, 0,
+		(RX_DESC * 8) * sizeof (unsigned int));
+
+	for (i = 0; i < RX_DESC; i++) {
+		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
+		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
+		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
+		rx_desc_base[i * 8] = 0x00100000;
+	}
+	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
+
+	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
+	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+		      (unsigned int) &rx_desc_base[0]);
+
+	/* TX descriptors */
+	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
+						sizeof (unsigned int));
+
+	/* align descriptors */
+	tx_desc_base = (unsigned int *)
+		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
+
+	tx_desc_index = -1;
+
+	memset ((void *) tx_desc_base, 0,
+		(TX_DESC * 8) * sizeof (unsigned int));
+
+	for (i = 0; i < TX_DESC; i++) {
+		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
+		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
+		tx_desc_base[i * 8 + 3] =
+			(unsigned int) &tx_desc_base[i * 8 + 4];
+		tx_desc_base[i * 8 + 2] =
+			(unsigned int) &tx_desc_base[(i + 1) * 8];
+		tx_desc_base[i * 8 + 1] =
+			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+
+		/* set sbytecnt and shadow byte cnt to 1 */
+		tx_desc_base[i * 8] = 0x00010001;
+	}
+	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
+
+	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
+
+	udelay (100);
+
+	galsdma_enable_rx ();
+
+	return;
+}
+
+int galbrg_set_baudrate (int channel, int rate)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int clock;
+
+	galbrg_disable (channel);	/*ok */
+
+#ifdef ZUMA_NTL
+	/* from tclk */
+	clock = (CFG_TCLK / (16 * rate)) - 1;
+#else
+	clock = (CFG_TCLK / (16 * rate)) - 1;
+#endif
+
+	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
+
+	galbrg_enable (channel);
+
+	gd->baudrate = rate;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* Below are all the private functions that no one else needs */
+
+static int galbrg_set_CDV (int channel, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp &= 0xFFFF0000;
+	temp |= (value & 0x0000FFFF);
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galbrg_enable (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp |= 0x00010000;
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galbrg_disable (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp &= 0xFFFEFFFF;
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galbrg_set_clksrc (int channel, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
+	temp |= (value << 18);
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+	return 0;
+}
+
+static int galbrg_set_CUV (int channel, int value)
+{
+	/* set CountUpValue */
+	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
+
+	return 0;
+}
+
+#if 0
+static int galbrg_reset (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp |= 0x20000;
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+#endif
+
+static int galsdma_set_RFT (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000001;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_SFM (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000002;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_rxle (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000040;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_txle (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000080;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_RC (int channel, unsigned int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp &= ~0x0000003c;
+	temp |= (value << 2);
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_burstsize (int channel, unsigned int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp &= 0xFFFFCFFF;
+	switch (value) {
+	case 8:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x3 << 12)));
+		break;
+
+	case 4:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x2 << 12)));
+		break;
+
+	case 2:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x1 << 12)));
+		break;
+
+	case 1:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x0 << 12)));
+		break;
+
+	default:
+		return -1;
+		break;
+	}
+
+	return 0;
+}
+
+static int galmpsc_connect (int channel, int connect)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
+
+	if ((channel == 0) && connect)
+		temp &= ~0x00000007;
+	else if ((channel == 1) && connect)
+		temp &= ~(0x00000007 << 6);
+	else if ((channel == 0) && !connect)
+		temp |= 0x00000007;
+	else
+		temp |= (0x00000007 << 6);
+
+	/* Just in case... */
+	temp &= 0x3fffffff;
+
+	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
+
+	return 0;
+}
+
+static int galmpsc_route_rx_clock (int channel, int brg)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
+
+	if (channel == 0) {
+		temp &= ~0x0000000F;
+		temp |= brg;
+	} else {
+		temp &= ~0x00000F00;
+		temp |= (brg << 8);
+	}
+
+	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
+
+	return 0;
+}
+
+static int galmpsc_route_tx_clock (int channel, int brg)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
+
+	if (channel == 0) {
+		temp &= ~0x0000000F;
+		temp |= brg;
+	} else {
+		temp &= ~0x00000F00;
+		temp |= (brg << 8);
+	}
+
+	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
+
+	return 0;
+}
+
+static int galmpsc_write_config_regs (int mpsc, int mode)
+{
+	if (mode == GALMPSC_UART) {
+		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
+		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
+			      0x000004c4);
+
+		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
+		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
+			      0x024003f8);
+		/*        22 2222 1111 */
+		/*        54 3210 9876 */
+		/* 0000 0010 0000 0000 */
+		/*       1 */
+		/*       098 7654 3210 */
+		/* 0000 0011 1111 1000 */
+	} else
+		return -1;
+
+	return 0;
+}
+
+static int galmpsc_config_channel_regs (int mpsc)
+{
+	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
+
+	galmpsc_set_brkcnt (mpsc, 0x3);
+	galmpsc_set_tcschar (mpsc, 0xab);
+
+	return 0;
+}
+
+static int galmpsc_set_brkcnt (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0x0000FFFF;
+	temp |= (value << 16);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_tcschar (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0xFFFF0000;
+	temp |= value;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_char_length (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0xFFFFCFFF;
+	temp |= (value << 12);
+	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_stop_bit_length (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0xFFFFBFFF;
+	temp |= (value << 14);
+	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_parity (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	if (value != -1) {
+		temp &= 0xFFF3FFF3;
+		temp |= ((value << 18) | (value << 2));
+		temp |= ((value << 17) | (value << 1));
+	} else {
+		temp &= 0xFFF1FFF1;
+	}
+
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_enter_hunt (int mpsc)
+{
+	int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	temp |= 0x80000000;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
+	       MPSC_ENTER_HUNT) {
+		udelay (1);
+	}
+	return 0;
+}
+
+
+static int galmpsc_shutdown (int mpsc)
+{
+	unsigned int temp;
+
+	/* cause RX abort (clears RX) */
+	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
+	temp &= ~MPSC_ENTER_HUNT;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
+	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+
+	/* shut down the MPSC */
+	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
+	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
+	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
+
+	udelay (100);
+
+	/* shut down the sdma engines. */
+	/* reset config to default */
+	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
+
+	udelay (100);
+
+	/* clear the SDMA current and first TX and RX pointers */
+	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
+	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
+	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
+
+	udelay (100);
+
+	return 0;
+}
+
+static void galsdma_enable_rx (void)
+{
+	int temp;
+
+	/* Enable RX processing */
+	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+	temp |= RX_ENABLE;
+	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+	galmpsc_enter_hunt (CHANNEL);
+}
+
+static int galmpsc_set_snoop (int mpsc, int value)
+{
+	int reg =
+		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
+		MPSC_0_ADDRESS_CONTROL_LOW;
+	int temp = GTREGREAD (reg);
+
+	if (value)
+		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
+	else
+		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
+	GT_REG_WRITE (reg, temp);
+	return 0;
+}
+
+/*******************************************************************************
+* galsdma_set_mem_space - Set MV64360 IDMA memory decoding map.
+*
+* DESCRIPTION:
+*       the MV64360 SDMA has its own address decoding map that is de-coupled
+*       from the CPU interface address decoding windows. The SDMA channels
+*       share four address windows. Each region can be individually configured
+*       by this function by associating it to a target interface and setting
+*       base and size values.
+*
+*      NOTE!!!
+*       The size must be in 64Kbyte granularity.
+*       The base address must be aligned to the size.
+*       The size must be a series of 1s followed by a series of zeros
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       True for success, false otherwise.
+*
+*******************************************************************************/
+
+static int galsdma_set_mem_space (unsigned int memSpace,
+				  unsigned int memSpaceTarget,
+				  unsigned int memSpaceAttr,
+				  unsigned int baseAddress, unsigned int size)
+{
+	unsigned int temp;
+
+	if (size == 0) {
+		GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
+				   1 << memSpace);
+		return true;
+	}
+
+	/* The base address must be aligned to the size.  */
+	if (baseAddress % size != 0) {
+		return false;
+	}
+	if (size < 0x10000) {
+		return false;
+	}
+
+	/* Align size and base to 64K */
+	baseAddress &= 0xffff0000;
+	size &= 0xffff0000;
+	temp = size >> 16;
+
+	/* Checking that the size is a sequence of '1' followed by a
+	   sequence of '0' starting from LSB to MSB. */
+	while ((temp > 0) && (temp & 0x1)) {
+		temp = temp >> 1;
+	}
+
+	if (temp != 0) {
+		GT_REG_WRITE (MV64360_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
+			      (baseAddress | memSpaceTarget | memSpaceAttr));
+		GT_REG_WRITE ((MV64360_CUNIT_SIZE0 + memSpace * 8),
+			      (size - 1) & 0xffff0000);
+		GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
+				   1 << memSpace);
+	} else {
+		/* An invalid size was specified */
+		return false;
+	}
+	return true;
+}
diff --git a/board/Marvell/db64360/mpsc.h b/board/Marvell/db64360/mpsc.h
new file mode 100644
index 0000000000..f95f8c0f47
--- /dev/null
+++ b/board/Marvell/db64360/mpsc.h
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+  ************************************************************************/
+
+
+/*
+ * mpsc.h - header file for MPSC in uart mode (console driver)
+ */
+
+#ifndef __MPSC_H__
+#define __MPSC_H__
+
+/* include actual Galileo defines */
+#include "../include/mv_gen_reg.h"
+
+/* driver related defines */
+
+int mpsc_init(int baud);
+void mpsc_sdma_init(void);
+void mpsc_init2(void);
+int galbrg_set_baudrate(int channel, int rate);
+
+int mpsc_putchar_early(char ch);
+char mpsc_getchar_debug(void);
+int mpsc_test_char_debug(void);
+
+int mpsc_test_char_sdma(void);
+
+extern int (*mpsc_putchar)(char ch);
+extern char (*mpsc_getchar)(void);
+extern int (*mpsc_test_char)(void);
+
+#define CHANNEL CONFIG_MPSC_PORT
+
+#define TX_DESC     5
+#define RX_DESC     20
+
+#define DESC_FIRST  0x00010000
+#define DESC_LAST   0x00020000
+#define DESC_OWNER_BIT  0x80000000
+
+#define TX_DEMAND   0x00800000
+#define TX_STOP     0x00010000
+#define RX_ENABLE   0x00000080
+
+#define SDMA_RX_ABORT 		  (1 << 15)
+#define SDMA_TX_ABORT 		  (1 << 31)
+#define MPSC_TX_ABORT 		  (1 << 7)
+#define MPSC_RX_ABORT             (1 << 23)
+#define MPSC_ENTER_HUNT           (1 << 31)
+
+/* MPSC defines */
+
+#define GALMPSC_CONNECT            0x1
+#define GALMPSC_DISCONNECT         0x0
+
+#define GALMPSC_UART               0x1
+
+#define GALMPSC_STOP_BITS_1        0x0
+#define GALMPSC_STOP_BITS_2        0x1
+#define GALMPSC_CHAR_LENGTH_8      0x3
+#define GALMPSC_CHAR_LENGTH_7      0x2
+
+#define GALMPSC_PARITY_ODD         0x0
+#define GALMPSC_PARITY_EVEN        0x2
+#define GALMPSC_PARITY_MARK        0x3
+#define GALMPSC_PARITY_SPACE       0x1
+#define GALMPSC_PARITY_NONE        -1
+
+#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
+#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
+#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
+#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
+#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
+#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
+#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
+
+#define GALMPSC_REG_GAP            0x1000
+
+#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
+#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
+#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
+#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
+#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
+#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
+#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
+#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
+#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
+#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
+#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
+#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
+
+#define GALSDMA_COMMAND_FIRST     (1 << 16)
+#define GALSDMA_COMMAND_LAST      (1 << 17)
+#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
+#define GALSDMA_COMMAND_AUTO      (1 << 30)
+#define GALSDMA_COMMAND_OWNER     (1 << 31)
+
+#define GALSDMA_RX                 0
+#define GALSDMA_TX                 1
+
+/* CHANNEL2 should be CHANNEL1, according to documentation,
+ * but to work with the current GTREGS file...
+ */
+#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
+#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
+#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
+#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
+#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
+#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
+#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
+#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
+#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
+#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
+#define GALSDMA_REG_DIFF           0x2000
+
+/* WRONG in gt64260R.h */
+#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
+#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
+#define GALMPSC_0_INT_CAUSE        0xb804
+#define GALMPSC_0_INT_MASK         0xb884
+
+#define GALSDMA_MODE_UART          0
+#define GALSDMA_MODE_BISYNC        1
+#define GALSDMA_MODE_HDLC          2
+#define GALSDMA_MODE_TRANSPARENT   3
+
+#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
+#define GALBRG_REG_GAP             0x0008
+#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
+
+#endif /* __MPSC_H__ */
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
new file mode 100644
index 0000000000..e2719b99d1
--- /dev/null
+++ b/board/Marvell/db64360/mv_eth.c
@@ -0,0 +1,3182 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.c - header file for the polled mode GT ethernet driver
+ */
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+
+#include "mv_eth.h"
+
+/* enable Debug outputs */
+
+#undef DEBUG_MV_ETH
+
+#ifdef DEBUG_MV_ETH
+#define DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+#undef MV64360_CHECKSUM_OFFLOAD
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The first part is the high level driver of the gigE ethernet ports.   *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+/* Definition for configuring driver */
+/* #define UPDATE_STATS_BY_SOFTWARE */
+#undef MV64360_RX_QUEUE_FILL_ON_TASK
+
+
+/* Constants */
+#define MAGIC_ETH_RUNNING		8031971
+#define MV64360_INTERNAL_SRAM_SIZE                      _256K
+#define EXTRA_BYTES 32
+#define WRAP       ETH_HLEN + 2 + 4 + 16
+#define BUFFER_MTU dev->mtu + WRAP
+#define INT_CAUSE_UNMASK_ALL		0x0007ffff
+#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
+#ifdef MV64360_RX_FILL_ON_TASK
+#define INT_CAUSE_MASK_ALL		0x00000000
+#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
+#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
+#endif
+
+/* Read/Write to/from MV64360 internal registers */
+#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
+#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
+#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
+#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
+
+/* Static function declarations */
+static int mv64360_eth_real_open (struct eth_device *eth);
+static int mv64360_eth_real_stop (struct eth_device *eth);
+static struct net_device_stats *mv64360_eth_get_stats (struct eth_device
+						       *dev);
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
+static void mv64360_eth_update_stat (struct eth_device *dev);
+bool db64360_eth_start (struct eth_device *eth);
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+				   unsigned int mib_offset);
+int mv64360_eth_receive (struct eth_device *dev);
+
+int mv64360_eth_xmit (struct eth_device *, volatile void *packet, int length);
+
+#ifndef  UPDATE_STATS_BY_SOFTWARE
+static void mv64360_eth_print_stat (struct eth_device *dev);
+#endif
+/* Processes a received packet */
+extern void NetReceive (volatile uchar *, int);
+
+extern unsigned int INTERNAL_REG_BASE_ADDR;
+
+/*************************************************
+ *Helper functions - used inside the driver only *
+ *************************************************/
+#ifdef DEBUG_MV_ETH
+void print_globals (struct eth_device *dev)
+{
+	printf ("Ethernet PRINT_Globals-Debug function\n");
+	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
+		(unsigned int) dev->priv);
+	printf ("Base Address for mv64360_eth_priv:	%08x\n",
+		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
+				 port_private));
+
+	printf ("GT Internal Base Address:	%08x\n",
+		INTERNAL_REG_BASE_ADDR);
+	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64360_TX_QUEUE_SIZE);
+	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64360_RX_QUEUE_SIZE);
+	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
+		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+		p_rx_buffer_base[0],
+		(MV64360_RX_QUEUE_SIZE * MV64360_RX_BUFFER_SIZE) + 32);
+	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
+		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+		p_tx_buffer_base[0],
+		(MV64360_TX_QUEUE_SIZE * MV64360_TX_BUFFER_SIZE) + 32);
+}
+#endif
+
+#define my_cpu_to_le32(x) my_le32_to_cpu((x))
+
+unsigned long my_le32_to_cpu (unsigned long x)
+{
+	return (((x & 0x000000ffU) << 24) |
+		((x & 0x0000ff00U) << 8) |
+		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
+}
+
+
+/**********************************************************************
+ * mv64360_eth_print_phy_status
+ *
+ * Prints gigabit ethenret phy status
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64360_eth_print_phy_status (struct eth_device *dev)
+{
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	unsigned int port_status, phy_reg_data;
+
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Check Link status on phy */
+	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+	if (!(phy_reg_data & 0x20)) {
+		printf ("Ethernet port changed link status to DOWN\n");
+	} else {
+		port_status =
+			MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
+		printf ("Ethernet status port %d: Link up", port_num);
+		printf (", %s",
+			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
+		if (port_status & BIT4)
+			printf (", Speed 1 Gbps");
+		else
+			printf (", %s",
+				(port_status & BIT5) ? "Speed 100 Mbps" :
+				"Speed 10 Mbps");
+		printf ("\n");
+	}
+}
+
+/**********************************************************************
+ * u-boot entry functions for mv64360_eth
+ *
+ **********************************************************************/
+int db64360_eth_probe (struct eth_device *dev)
+{
+	return ((int) db64360_eth_start (dev));
+}
+
+int db64360_eth_poll (struct eth_device *dev)
+{
+	return mv64360_eth_receive (dev);
+}
+
+int db64360_eth_transmit (struct eth_device *dev, volatile void *packet,
+			  int length)
+{
+	mv64360_eth_xmit (dev, packet, length);
+	return 0;
+}
+
+void db64360_eth_disable (struct eth_device *dev)
+{
+	mv64360_eth_stop (dev);
+}
+
+
+void mv6436x_eth_initialize (bd_t * bis)
+{
+	struct eth_device *dev;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	int devnum, x, temp;
+	char *s, *e, buf[64];
+
+	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
+		dev = calloc (sizeof (*dev), 1);
+		if (!dev) {
+			printf ("%s: mv_enet%d allocation failure, %s\n",
+				__FUNCTION__, devnum, "eth_device structure");
+			return;
+		}
+
+		/* must be less than NAMESIZE (16) */
+		sprintf (dev->name, "mv_enet%d", devnum);
+
+#ifdef DEBUG
+		printf ("Initializing %s\n", dev->name);
+#endif
+
+		/* Extract the MAC address from the environment */
+		switch (devnum) {
+		case 0:
+			s = "ethaddr";
+			break;
+
+		case 1:
+			s = "eth1addr";
+			break;
+
+		case 2:
+			s = "eth2addr";
+			break;
+
+		default:	/* this should never happen */
+			printf ("%s: Invalid device number %d\n",
+				__FUNCTION__, devnum);
+			return;
+		}
+
+		temp = getenv_r (s, buf, sizeof (buf));
+		s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+		printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+		for (x = 0; x < 6; ++x) {
+			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+		/* ronen - set the MAC addr in the HW */
+		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
+
+		dev->init = (void *) db64360_eth_probe;
+		dev->halt = (void *) ethernet_phy_reset;
+		dev->send = (void *) db64360_eth_transmit;
+		dev->recv = (void *) db64360_eth_poll;
+
+		dev->priv = (void *) ethernet_private =
+			calloc (sizeof (*ethernet_private), 1);
+		if (!ethernet_private) {
+			printf ("%s: %s allocation failure, %s\n",
+				__FUNCTION__, dev->name,
+				"Private Device Structure");
+			free (dev);
+			return;
+		}
+		/* start with an zeroed ETH_PORT_INFO */
+		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
+		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+		/* set pointer to memory for stats data structure etc... */
+		ethernet_private->port_private = (void *) port_private =
+			calloc (sizeof (*ethernet_private), 1);
+		if (!port_private) {
+			printf ("%s: %s allocation failure, %s\n",
+				__FUNCTION__, dev->name,
+				"Port Private Device Structure");
+
+			free (ethernet_private);
+			free (dev);
+			return;
+		}
+
+		port_private->stats =
+			calloc (sizeof (struct net_device_stats), 1);
+		if (!port_private->stats) {
+			printf ("%s: %s allocation failure, %s\n",
+				__FUNCTION__, dev->name,
+				"Net stat Structure");
+
+			free (port_private);
+			free (ethernet_private);
+			free (dev);
+			return;
+		}
+		memset (ethernet_private->port_private, 0,
+			sizeof (struct mv64360_eth_priv));
+		switch (devnum) {
+		case 0:
+			ethernet_private->port_num = ETH_0;
+			break;
+		case 1:
+			ethernet_private->port_num = ETH_1;
+			break;
+		case 2:
+			ethernet_private->port_num = ETH_2;
+			break;
+		default:
+			printf ("Invalid device number %d\n", devnum);
+			break;
+		};
+
+		port_private->port_num = devnum;
+		/*
+		 * Read MIB counter on the GT in order to reset them,
+		 * then zero all the stats fields in memory
+		 */
+		mv64360_eth_update_stat (dev);
+		memset (port_private->stats, 0,
+			sizeof (struct net_device_stats));
+		/* Extract the MAC address from the environment */
+		switch (devnum) {
+		case 0:
+			s = "ethaddr";
+			break;
+
+		case 1:
+			s = "eth1addr";
+			break;
+
+		case 2:
+			s = "eth2addr";
+			break;
+
+		default:	/* this should never happen */
+			printf ("%s: Invalid device number %d\n",
+				__FUNCTION__, devnum);
+			return;
+		}
+
+		temp = getenv_r (s, buf, sizeof (buf));
+		s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+		printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+		for (x = 0; x < 6; ++x) {
+			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+
+		DP (printf ("Allocating descriptor and buffer rings\n"));
+
+		ethernet_private->p_rx_desc_area_base[0] =
+			(ETH_RX_DESC *) memalign (16,
+						  RX_DESC_ALIGNED_SIZE *
+						  MV64360_RX_QUEUE_SIZE + 1);
+		ethernet_private->p_tx_desc_area_base[0] =
+			(ETH_TX_DESC *) memalign (16,
+						  TX_DESC_ALIGNED_SIZE *
+						  MV64360_TX_QUEUE_SIZE + 1);
+
+		ethernet_private->p_rx_buffer_base[0] =
+			(char *) memalign (16,
+					   MV64360_RX_QUEUE_SIZE *
+					   MV64360_TX_BUFFER_SIZE + 1);
+		ethernet_private->p_tx_buffer_base[0] =
+			(char *) memalign (16,
+					   MV64360_RX_QUEUE_SIZE *
+					   MV64360_TX_BUFFER_SIZE + 1);
+
+#ifdef DEBUG_MV_ETH
+		/* DEBUG OUTPUT prints adresses of globals */
+		print_globals (dev);
+#endif
+		eth_register (dev);
+
+	}
+	DP (printf ("%s: exit\n", __FUNCTION__));
+
+}
+
+/**********************************************************************
+ * mv64360_eth_open
+ *
+ * This function is called when openning the network device. The function
+ * should initialize all the hardware, initialize cyclic Rx/Tx
+ * descriptors chain and buffers and allocate an IRQ to the network
+ * device.
+ *
+ * Input : a pointer to the network device structure
+ * / / ronen - changed the output to match  net/eth.c needs
+ * Output : nonzero of success , zero if fails.
+ * under construction
+ **********************************************************************/
+
+int mv64360_eth_open (struct eth_device *dev)
+{
+	return (mv64360_eth_real_open (dev));
+}
+
+/* Helper function for mv64360_eth_open */
+static int mv64360_eth_real_open (struct eth_device *dev)
+{
+
+	unsigned int queue;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+	u32 port_status, phy_reg_data;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	/* ronen - when we update the MAC env params we only update dev->enetaddr
+	   see ./net/eth.c eth_set_enetaddr() */
+	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Stop RX Queues */
+	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+		      0x0000ff00);
+
+	/* Clear the ethernet port interrupts */
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+
+	/* Unmask RX buffer and TX end interrupt */
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num),
+		      INT_CAUSE_UNMASK_ALL);
+
+	/* Unmask phy and link status changes interrupts */
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
+		      INT_CAUSE_UNMASK_ALL_EXT);
+
+	/* Set phy address of the port */
+	ethernet_private->port_phy_addr = 0x8 + port_num;
+
+	/* Activate the DMA channels etc */
+	eth_port_init (ethernet_private);
+
+
+	/* "Allocate" setup TX rings */
+
+	for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
+		unsigned int size;
+
+		port_private->tx_ring_size[queue] = MV64360_TX_QUEUE_SIZE;
+		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
+		ethernet_private->tx_desc_area_size[queue] = size;
+
+		/* first clear desc area completely */
+		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
+			0, ethernet_private->tx_desc_area_size[queue]);
+
+		/* initialize tx desc ring with low level driver */
+		if (ether_init_tx_desc_ring
+		    (ethernet_private, ETH_Q0,
+		     port_private->tx_ring_size[queue],
+		     MV64360_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+		     (unsigned int) ethernet_private->
+		     p_tx_desc_area_base[queue],
+		     (unsigned int) ethernet_private->
+		     p_tx_buffer_base[queue]) == false)
+			printf ("### Error initializing TX Ring\n");
+	}
+
+	/* "Allocate" setup RX rings */
+	for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
+		unsigned int size;
+
+		/* Meantime RX Ring are fixed - but must be configurable by user */
+		port_private->rx_ring_size[queue] = MV64360_RX_QUEUE_SIZE;
+		size = (port_private->rx_ring_size[queue] *
+			RX_DESC_ALIGNED_SIZE);
+		ethernet_private->rx_desc_area_size[queue] = size;
+
+		/* first clear desc area completely */
+		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
+			0, ethernet_private->rx_desc_area_size[queue]);
+		if ((ether_init_rx_desc_ring
+		     (ethernet_private, ETH_Q0,
+		      port_private->rx_ring_size[queue],
+		      MV64360_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+		      (unsigned int) ethernet_private->
+		      p_rx_desc_area_base[queue],
+		      (unsigned int) ethernet_private->
+		      p_rx_buffer_base[queue])) == false)
+			printf ("### Error initializing RX Ring\n");
+	}
+
+	eth_port_start (ethernet_private);
+
+	/* Set maximum receive buffer to 9700 bytes */
+	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num),
+		      (0x5 << 17) |
+		      (MV_REG_READ
+		       (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num))
+		       & 0xfff1ffff));
+
+	/*
+	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
+	 * disable the leaky bucket mechanism .
+	 */
+
+	MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
+	port_status = MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
+
+	/* Check Link status on phy */
+	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+	if (!(phy_reg_data & 0x20)) {
+		/* Reset PHY */
+		if ((ethernet_phy_reset (port_num)) != true) {
+			printf ("$$ Warnning: No link on port %d \n",
+				port_num);
+			return 0;
+		} else {
+			eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+			if (!(phy_reg_data & 0x20)) {
+				printf ("### Error: Phy is not active\n");
+				return 0;
+			}
+		}
+	} else {
+		mv64360_eth_print_phy_status (dev);
+	}
+	port_private->eth_running = MAGIC_ETH_RUNNING;
+	return 1;
+}
+
+
+static int mv64360_eth_free_tx_rings (struct eth_device *dev)
+{
+	unsigned int queue;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+	volatile ETH_TX_DESC *p_tx_curr_desc;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Stop Tx Queues */
+	MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
+		      0x0000ff00);
+
+	/* Free TX rings */
+	DP (printf ("Clearing previously allocated TX queues... "));
+	for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
+		/* Free on TX rings */
+		for (p_tx_curr_desc =
+		     ethernet_private->p_tx_desc_area_base[queue];
+		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
+		      ethernet_private->p_tx_desc_area_base[queue] +
+		      ethernet_private->tx_desc_area_size[queue]);
+		     p_tx_curr_desc =
+		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
+				      TX_DESC_ALIGNED_SIZE)) {
+			/* this is inside for loop */
+			if (p_tx_curr_desc->return_info != 0) {
+				p_tx_curr_desc->return_info = 0;
+				DP (printf ("freed\n"));
+			}
+		}
+		DP (printf ("Done\n"));
+	}
+	return 0;
+}
+
+static int mv64360_eth_free_rx_rings (struct eth_device *dev)
+{
+	unsigned int queue;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+	volatile ETH_RX_DESC *p_rx_curr_desc;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+
+	/* Stop RX Queues */
+	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+		      0x0000ff00);
+
+	/* Free RX rings */
+	DP (printf ("Clearing previously allocated RX queues... "));
+	for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
+		/* Free preallocated skb's on RX rings */
+		for (p_rx_curr_desc =
+		     ethernet_private->p_rx_desc_area_base[queue];
+		     (((unsigned int) p_rx_curr_desc <
+		       ((unsigned int) ethernet_private->
+			p_rx_desc_area_base[queue] +
+			ethernet_private->rx_desc_area_size[queue])));
+		     p_rx_curr_desc =
+		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
+				      RX_DESC_ALIGNED_SIZE)) {
+			if (p_rx_curr_desc->return_info != 0) {
+				p_rx_curr_desc->return_info = 0;
+				DP (printf ("freed\n"));
+			}
+		}
+		DP (printf ("Done\n"));
+	}
+	return 0;
+}
+
+/**********************************************************************
+ * mv64360_eth_stop
+ *
+ * This function is used when closing the network device.
+ * It updates the hardware,
+ * release all memory that holds buffers and descriptors and release the IRQ.
+ * Input : a pointer to the device structure
+ * Output : zero if success , nonzero if fails
+ *********************************************************************/
+
+int mv64360_eth_stop (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Disable all gigE address decoder */
+	MV_REG_WRITE (MV64360_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
+	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
+	mv64360_eth_real_stop (dev);
+
+	return 0;
+};
+
+/* Helper function for mv64360_eth_stop */
+
+static int mv64360_eth_real_stop (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+
+	mv64360_eth_free_tx_rings (dev);
+	mv64360_eth_free_rx_rings (dev);
+
+	eth_port_reset (ethernet_private->port_num);
+	/* Disable ethernet port interrupts */
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+	/* Mask RX buffer and TX end interrupt */
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num), 0);
+	/* Mask phy and link status changes interrupts */
+	MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
+	MV_RESET_REG_BITS (MV64360_CPU_INTERRUPT0_MASK_HIGH,
+			   BIT0 << port_num);
+	/* Print Network statistics */
+#ifndef  UPDATE_STATS_BY_SOFTWARE
+	/*
+	 * Print statistics (only if ethernet is running),
+	 * then zero all the stats fields in memory
+	 */
+	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
+		port_private->eth_running = 0;
+		mv64360_eth_print_stat (dev);
+	}
+	memset (port_private->stats, 0, sizeof (struct net_device_stats));
+#endif
+	DP (printf ("\nEthernet stopped ... \n"));
+	return 0;
+}
+
+
+/**********************************************************************
+ * mv64360_eth_start_xmit
+ *
+ * This function is queues a packet in the Tx descriptor for
+ * required port.
+ *
+ * Input : skb - a pointer to socket buffer
+ *         dev - a pointer to the required port
+ *
+ * Output : zero upon success
+ **********************************************************************/
+
+int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
+		      int dataSize)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+	PKT_INFO pkt_info;
+	ETH_FUNC_RET_STATUS status;
+	struct net_device_stats *stats;
+	ETH_FUNC_RET_STATUS release_result;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	stats = port_private->stats;
+
+	/* Update packet info data structure */
+	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
+	pkt_info.byte_cnt = dataSize;
+	pkt_info.buf_ptr = (unsigned int) dataPtr;
+
+	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
+	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
+		printf ("Error on transmitting packet ..");
+		if (status == ETH_QUEUE_FULL)
+			printf ("ETH Queue is full. \n");
+		if (status == ETH_QUEUE_LAST_RESOURCE)
+			printf ("ETH Queue: using last available resource. \n");
+		goto error;
+	}
+
+	/* Update statistics and start of transmittion time */
+	stats->tx_bytes += dataSize;
+	stats->tx_packets++;
+
+	/* Check if packet(s) is(are) transmitted correctly (release everything) */
+	do {
+		release_result =
+			eth_tx_return_desc (ethernet_private, ETH_Q0,
+					    &pkt_info);
+		switch (release_result) {
+		case ETH_OK:
+			DP (printf ("descriptor released\n"));
+			if (pkt_info.cmd_sts & BIT0) {
+				printf ("Error in TX\n");
+				stats->tx_errors++;
+
+			}
+			break;
+		case ETH_RETRY:
+			DP (printf ("transmission still in process\n"));
+			break;
+
+		case ETH_ERROR:
+			printf ("routine can not access Tx desc ring\n");
+			break;
+
+		case ETH_END_OF_JOB:
+			DP (printf ("the routine has nothing to release\n"));
+			break;
+		default:	/* should not happen */
+			break;
+		}
+	} while (release_result == ETH_OK);
+
+
+	return 0;		/* success */
+      error:
+	return 1;		/* Failed - higher layers will free the skb */
+}
+
+/**********************************************************************
+ * mv64360_eth_receive
+ *
+ * This function is forward packets that are received from the port's
+ * queues toward kernel core or FastRoute them to another interface.
+ *
+ * Input : dev - a pointer to the required interface
+ *         max - maximum number to receive (0 means unlimted)
+ *
+ * Output : number of served packets
+ **********************************************************************/
+
+int mv64360_eth_receive (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+	PKT_INFO pkt_info;
+	struct net_device_stats *stats;
+
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+	stats = port_private->stats;
+
+	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
+		ETH_OK)) {
+
+#ifdef DEBUG_MV_ETH
+		if (pkt_info.byte_cnt != 0) {
+			printf ("%s: Received %d byte Packet @ 0x%x\n",
+				__FUNCTION__, pkt_info.byte_cnt,
+				pkt_info.buf_ptr);
+		}
+#endif
+		/* Update statistics. Note byte count includes 4 byte CRC count */
+		stats->rx_packets++;
+		stats->rx_bytes += pkt_info.byte_cnt;
+
+		/*
+		 * In case received a packet without first / last bits on OR the error
+		 * summary bit is on, the packets needs to be dropeed.
+		 */
+		if (((pkt_info.
+		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
+		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
+		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
+			stats->rx_dropped++;
+
+			printf ("Received packet spread on multiple descriptors\n");
+
+			/* Is this caused by an error ? */
+			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
+				stats->rx_errors++;
+			}
+
+			/* free these descriptors again without forwarding them to the higher layers */
+			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
+			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
+
+			if (eth_rx_return_buff
+			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+				printf ("Error while returning the RX Desc to Ring\n");
+			} else {
+				DP (printf ("RX Desc returned to Ring\n"));
+			}
+			/* /free these descriptors again */
+		} else {
+
+/* !!! call higher layer processing */
+#ifdef DEBUG_MV_ETH
+			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
+#endif
+			/* let the upper layer handle the packet */
+			NetReceive ((uchar *) pkt_info.buf_ptr,
+				    (int) pkt_info.byte_cnt);
+
+/* **************************************************************** */
+/* free descriptor  */
+			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
+			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
+			DP (printf
+			    ("RX: pkt_info.buf_ptr =	%x\n",
+			     pkt_info.buf_ptr));
+			if (eth_rx_return_buff
+			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+				printf ("Error while returning the RX Desc to Ring\n");
+			} else {
+				DP (printf ("RX Desc returned to Ring\n"));
+			}
+
+/* **************************************************************** */
+
+		}
+	}
+	mv64360_eth_get_stats (dev);	/* update statistics */
+	return 1;
+}
+
+/**********************************************************************
+ * mv64360_eth_get_stats
+ *
+ * Returns a pointer to the interface statistics.
+ *
+ * Input : dev - a pointer to the required interface
+ *
+ * Output : a pointer to the interface's statistics
+ **********************************************************************/
+
+static struct net_device_stats *mv64360_eth_get_stats (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	mv64360_eth_update_stat (dev);
+
+	return port_private->stats;
+}
+
+
+/**********************************************************************
+ * mv64360_eth_update_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64360_eth_update_stat (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	struct net_device_stats *stats;
+	unsigned int port_num;
+	volatile unsigned int dummy;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+	stats = port_private->stats;
+
+	/* These are false updates */
+	stats->rx_packets += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_FRAMES_RECEIVED);
+	stats->tx_packets += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_FRAMES_SENT);
+	stats->rx_bytes += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
+	/*
+	 * Ideally this should be as follows -
+	 *
+	 *   stats->rx_bytes   += stats->rx_bytes +
+	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
+	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
+	 *
+	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
+	 * is just a dummy read for proper work of the GigE port
+	 */
+	dummy = eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
+	stats->tx_bytes += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
+	dummy = eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
+	stats->rx_errors += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_MAC_RECEIVE_ERROR);
+
+	/* Rx dropped is for received packet with CRC error */
+	stats->rx_dropped +=
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_BAD_CRC_EVENT);
+	stats->multicast += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
+	stats->collisions +=
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_COLLISION) +
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_LATE_COLLISION);
+	/* detailed rx errors */
+	stats->rx_length_errors +=
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_UNDERSIZE_RECEIVED)
+		+
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_OVERSIZE_RECEIVED);
+	/* detailed tx errors */
+}
+
+#ifndef  UPDATE_STATS_BY_SOFTWARE
+/**********************************************************************
+ * mv64360_eth_print_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64360_eth_print_stat (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64360_eth_priv *port_private;
+	struct net_device_stats *stats;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64360_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+	stats = port_private->stats;
+
+	/* These are false updates */
+	printf ("\n### Network statistics: ###\n");
+	printf ("--------------------------\n");
+	printf (" Packets received:		%ld\n", stats->rx_packets);
+	printf (" Packets send:			%ld\n", stats->tx_packets);
+	printf (" Received bytes:		%ld\n", stats->rx_bytes);
+	printf (" Send bytes:			%ld\n", stats->tx_bytes);
+	if (stats->rx_errors != 0)
+		printf (" Rx Errors:			%ld\n",
+			stats->rx_errors);
+	if (stats->rx_dropped != 0)
+		printf (" Rx dropped (CRC Errors):	%ld\n",
+			stats->rx_dropped);
+	if (stats->multicast != 0)
+		printf (" Rx mulicast frames:		%ld\n",
+			stats->multicast);
+	if (stats->collisions != 0)
+		printf (" No. of collisions:		%ld\n",
+			stats->collisions);
+	if (stats->rx_length_errors != 0)
+		printf (" Rx length errors:		%ld\n",
+			stats->rx_length_errors);
+}
+#endif
+
+/**************************************************************************
+ *network_start - Network Kick Off Routine UBoot
+ *Inputs :
+ *Outputs :
+ **************************************************************************/
+
+bool db64360_eth_start (struct eth_device *dev)
+{
+	return (mv64360_eth_open (dev));	/* calls real open */
+}
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The second part is the low level driver of the gigE ethernet ports.   *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+/*
+ * based on Linux code
+ * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+/********************************************************************************
+ * Marvell's Gigabit Ethernet controller low level driver
+ *
+ * DESCRIPTION:
+ *       This file introduce low level API to Marvell's Gigabit Ethernet
+ *		controller. This Gigabit Ethernet Controller driver API controls
+ *		1) Operations (i.e. port init, start, reset etc').
+ *		2) Data flow (i.e. port send, receive etc').
+ *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
+ *		struct.
+ *		This struct includes user configuration information as well as
+ *		driver internal data needed for its operations.
+ *
+ *		Supported Features:
+ *		- This low level driver is OS independent. Allocating memory for
+ *		  the descriptor rings and buffers are not within the scope of
+ *		  this driver.
+ *		- The user is free from Rx/Tx queue managing.
+ *		- This low level driver introduce functionality API that enable
+ *		  the to operate Marvell's Gigabit Ethernet Controller in a
+ *		  convenient way.
+ *		- Simple Gigabit Ethernet port operation API.
+ *		- Simple Gigabit Ethernet port data flow API.
+ *		- Data flow and operation API support per queue functionality.
+ *		- Support cached descriptors for better performance.
+ *		- Enable access to all four DRAM banks and internal SRAM memory
+ *		  spaces.
+ *		- PHY access and control API.
+ *		- Port control register configuration API.
+ *		- Full control over Unicast and Multicast MAC configurations.
+ *
+ *		Operation flow:
+ *
+ *		Initialization phase
+ *		This phase complete the initialization of the ETH_PORT_INFO
+ *		struct.
+ *		User information regarding port configuration has to be set
+ *		prior to calling the port initialization routine. For example,
+ *		the user has to assign the port_phy_addr field which is board
+ *		depended parameter.
+ *		In this phase any port Tx/Rx activity is halted, MIB counters
+ *		are cleared, PHY address is set according to user parameter and
+ *		access to DRAM and internal SRAM memory spaces.
+ *
+ *		Driver ring initialization
+ *		Allocating memory for the descriptor rings and buffers is not
+ *		within the scope of this driver. Thus, the user is required to
+ *		allocate memory for the descriptors ring and buffers. Those
+ *		memory parameters are used by the Rx and Tx ring initialization
+ *		routines in order to curve the descriptor linked list in a form
+ *		of a ring.
+ *		Note: Pay special attention to alignment issues when using
+ *		cached descriptors/buffers. In this phase the driver store
+ *		information in the ETH_PORT_INFO struct regarding each queue
+ *		ring.
+ *
+ *		Driver start
+ *		This phase prepares the Ethernet port for Rx and Tx activity.
+ *		It uses the information stored in the ETH_PORT_INFO struct to
+ *		initialize the various port registers.
+ *
+ *		Data flow:
+ *		All packet references to/from the driver are done using PKT_INFO
+ *		struct.
+ *		This struct is a unified struct used with Rx and Tx operations.
+ *		This way the user is not required to be familiar with neither
+ *		Tx nor Rx descriptors structures.
+ *		The driver's descriptors rings are management by indexes.
+ *		Those indexes controls the ring resources and used to indicate
+ *		a SW resource error:
+ *		'current'
+ *		This index points to the current available resource for use. For
+ *		example in Rx process this index will point to the descriptor
+ *		that will be passed to the user upon calling the receive routine.
+ *		In Tx process, this index will point to the descriptor
+ *		that will be assigned with the user packet info and transmitted.
+ *		'used'
+ *		This index points to the descriptor that need to restore its
+ *		resources. For example in Rx process, using the Rx buffer return
+ *		API will attach the buffer returned in packet info to the
+ *		descriptor pointed by 'used'. In Tx process, using the Tx
+ *		descriptor return will merely return the user packet info with
+ *		the command status of  the transmitted buffer pointed by the
+ *		'used' index. Nevertheless, it is essential to use this routine
+ *		to update the 'used' index.
+ *		'first'
+ *		This index supports Tx Scatter-Gather. It points to the first
+ *		descriptor of a packet assembled of multiple buffers. For example
+ *		when in middle of Such packet we have a Tx resource error the
+ *		'curr' index get the value of 'first' to indicate that the ring
+ *		returned to its state before trying to transmit this packet.
+ *
+ *		Receive operation:
+ *		The eth_port_receive API set the packet information struct,
+ *		passed by the caller, with received information from the
+ *		'current' SDMA descriptor.
+ *		It is the user responsibility to return this resource back
+ *		to the Rx descriptor ring to enable the reuse of this source.
+ *		Return Rx resource is done using the eth_rx_return_buff API.
+ *
+ *		Transmit operation:
+ *		The eth_port_send API supports Scatter-Gather which enables to
+ *		send a packet spanned over multiple buffers. This means that
+ *		for each packet info structure given by the user and put into
+ *		the Tx descriptors ring, will be transmitted only if the 'LAST'
+ *		bit will be set in the packet info command status field. This
+ *		API also consider restriction regarding buffer alignments and
+ *		sizes.
+ *		The user must return a Tx resource after ensuring the buffer
+ *		has been transmitted to enable the Tx ring indexes to update.
+ *
+ *		BOARD LAYOUT
+ *		This device is on-board.  No jumper diagram is necessary.
+ *
+ *		EXTERNAL INTERFACE
+ *
+ *       Prior to calling the initialization routine eth_port_init() the user
+ *	 must set the following fields under ETH_PORT_INFO struct:
+ *       port_num             User Ethernet port number.
+ *       port_phy_addr		    User PHY address of Ethernet port.
+ *       port_mac_addr[6]	    User defined port MAC address.
+ *       port_config          User port configuration value.
+ *       port_config_extend    User port config extend value.
+ *       port_sdma_config      User port SDMA config value.
+ *       port_serial_control   User port serial control value.
+ *       *port_virt_to_phys ()  User function to cast virtual addr to CPU bus addr.
+ *       *port_private        User scratch pad for user specific data structures.
+ *
+ *       This driver introduce a set of default values:
+ *       PORT_CONFIG_VALUE           Default port configuration value
+ *       PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
+ *       PORT_SDMA_CONFIG_VALUE      Default sdma control value
+ *       PORT_SERIAL_CONTROL_VALUE   Default port serial control value
+ *
+ *		This driver data flow is done using the PKT_INFO struct which is
+ *		a unified struct for Rx and Tx operations:
+ *		byte_cnt	Tx/Rx descriptor buffer byte count.
+ *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
+ *		cmd_sts		Tx/Rx descriptor command status.
+ *		buf_ptr		Tx/Rx descriptor buffer pointer.
+ *		return_info	Tx/Rx user resource return information.
+ *
+ *
+ *		EXTERNAL SUPPORT REQUIREMENTS
+ *
+ *		This driver requires the following external support:
+ *
+ *		D_CACHE_FLUSH_LINE (address, address offset)
+ *
+ *		This macro applies assembly code to flush and invalidate cache
+ *		line.
+ *		address        - address base.
+ *		address offset - address offset
+ *
+ *
+ *		CPU_PIPE_FLUSH
+ *
+ *		This macro applies assembly code to flush the CPU pipeline.
+ *
+ *******************************************************************************/
+/* includes */
+
+/* defines */
+/* SDMA command macros */
+#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
+
+#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
+ (1 << (8 + tx_queue)))
+
+#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
+
+#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
+
+#define CURR_RFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
+
+#define CURR_RFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_RFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
+
+#define USED_RFD_SET(p_used_desc, queue)\
+(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
+
+
+#define CURR_TFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
+
+#define CURR_TFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_TFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
+
+#define USED_TFD_SET(p_used_desc, queue) \
+ (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
+
+#define FIRST_TFD_GET(p_first_desc, queue) \
+ ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
+
+#define FIRST_TFD_SET(p_first_desc, queue) \
+ (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
+
+
+/* Macros that save access to desc in order to find next desc pointer  */
+#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
+
+#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
+
+#define LINK_UP_TIMEOUT		100000
+#define PHY_BUSY_TIMEOUT    10000000
+
+/* locals */
+
+/* PHY routines */
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
+static int ethernet_phy_get (ETH_PORT eth_port_num);
+
+/* Ethernet Port routines */
+static void eth_set_access_control (ETH_PORT eth_port_num,
+				    ETH_WIN_PARAM * param);
+static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
+			      ETH_QUEUE queue, int option);
+#if 0				/* FIXME */
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+			       unsigned char mc_byte,
+			       ETH_QUEUE queue, int option);
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+			       unsigned char crc8,
+			       ETH_QUEUE queue, int option);
+#endif
+
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+			int byte_count);
+
+void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
+
+
+typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
+u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
+{
+	u32 result = 0;
+	u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
+
+	if (enable & (1 << bank))
+		return 0;
+	if (bank == BANK0)
+		result = MV_REG_READ (MV64360_CS_0_BASE_ADDR);
+	if (bank == BANK1)
+		result = MV_REG_READ (MV64360_CS_1_BASE_ADDR);
+	if (bank == BANK2)
+		result = MV_REG_READ (MV64360_CS_2_BASE_ADDR);
+	if (bank == BANK3)
+		result = MV_REG_READ (MV64360_CS_3_BASE_ADDR);
+	result &= 0x0000ffff;
+	result = result << 16;
+	return result;
+}
+
+u32 mv_get_dram_bank_size (MEMORY_BANK bank)
+{
+	u32 result = 0;
+	u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
+
+	if (enable & (1 << bank))
+		return 0;
+	if (bank == BANK0)
+		result = MV_REG_READ (MV64360_CS_0_SIZE);
+	if (bank == BANK1)
+		result = MV_REG_READ (MV64360_CS_1_SIZE);
+	if (bank == BANK2)
+		result = MV_REG_READ (MV64360_CS_2_SIZE);
+	if (bank == BANK3)
+		result = MV_REG_READ (MV64360_CS_3_SIZE);
+	result += 1;
+	result &= 0x0000ffff;
+	result = result << 16;
+	return result;
+}
+
+u32 mv_get_internal_sram_base (void)
+{
+	u32 result;
+
+	result = MV_REG_READ (MV64360_INTEGRATED_SRAM_BASE_ADDR);
+	result &= 0x0000ffff;
+	result = result << 16;
+	return result;
+}
+
+/*******************************************************************************
+* eth_port_init - Initialize the Ethernet port driver
+*
+* DESCRIPTION:
+*       This function prepares the ethernet port to start its activity:
+*       1) Completes the ethernet port driver struct initialization toward port
+*           start routine.
+*       2) Resets the device to a quiescent state in case of warm reboot.
+*       3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
+*       4) Clean MAC tables. The reset status of those tables is unknown.
+*       5) Set PHY address.
+*       Note: Call this routine prior to eth_port_start routine and after setting
+*       user values in the user fields of Ethernet port control struct (i.e.
+*       port_phy_addr).
+*
+* INPUT:
+*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
+*
+* OUTPUT:
+*       See description.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+	int queue;
+	ETH_WIN_PARAM win_param;
+
+	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
+	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
+	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
+	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
+
+	p_eth_port_ctrl->port_rx_queue_command = 0;
+	p_eth_port_ctrl->port_tx_queue_command = 0;
+
+	/* Zero out SW structs */
+	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+		p_eth_port_ctrl->rx_resource_err[queue] = false;
+	}
+
+	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+		p_eth_port_ctrl->tx_resource_err[queue] = false;
+	}
+
+	eth_port_reset (p_eth_port_ctrl->port_num);
+
+	/* Set access parameters for DRAM bank 0 */
+	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR  */
+	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
+	win_param.size = mv_get_dram_bank_size (BANK0);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for DRAM bank 1 */
+	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
+	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
+	win_param.size = mv_get_dram_bank_size (BANK1);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for DRAM bank 2 */
+	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
+	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
+	win_param.size = mv_get_dram_bank_size (BANK2);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for DRAM bank 3 */
+	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
+	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
+	win_param.size = mv_get_dram_bank_size (BANK3);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for Internal SRAM */
+	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
+	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
+	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
+	win_param.high_addr = 0;
+	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
+	win_param.size = MV64360_INTERNAL_SRAM_SIZE;	/* Get bank size */
+	win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
+
+	ethernet_phy_set (p_eth_port_ctrl->port_num,
+			  p_eth_port_ctrl->port_phy_addr);
+
+	return;
+
+}
+
+/*******************************************************************************
+* eth_port_start - Start the Ethernet port activity.
+*
+* DESCRIPTION:
+*       This routine prepares the Ethernet port for Rx and Tx activity:
+*       1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
+*           has been initialized a descriptor's ring (using ether_init_tx_desc_ring
+*           for Tx and ether_init_rx_desc_ring for Rx)
+*       2. Initialize and enable the Ethernet configuration port by writing to
+*           the port's configuration and command registers.
+*       3. Initialize and enable the SDMA by writing to the SDMA's
+*    configuration and command registers.
+*       After completing these steps, the ethernet port SDMA can starts to
+*       perform Rx and Tx activities.
+*
+*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
+*       to calling this function (use ether_init_tx_desc_ring for Tx queues and
+*       ether_init_rx_desc_ring for Rx queues).
+*
+* INPUT:
+*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
+*
+* OUTPUT:
+*       Ethernet port is ready to receive and transmit.
+*
+* RETURN:
+*       false if the port PHY is not up.
+*       true otherwise.
+*
+*******************************************************************************/
+static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+	int queue;
+	volatile ETH_TX_DESC *p_tx_curr_desc;
+	volatile ETH_RX_DESC *p_rx_curr_desc;
+	unsigned int phy_reg_data;
+	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
+
+
+	/* Assignment of Tx CTRP of given queue */
+	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+		CURR_TFD_GET (p_tx_curr_desc, queue);
+		MV_REG_WRITE ((MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
+			       (eth_port_num)
+			       + (4 * queue)),
+			      ((unsigned int) p_tx_curr_desc));
+
+	}
+
+	/* Assignment of Rx CRDP of given queue */
+	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+		CURR_RFD_GET (p_rx_curr_desc, queue);
+		MV_REG_WRITE ((MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
+			       (eth_port_num)
+			       + (4 * queue)),
+			      ((unsigned int) p_rx_curr_desc));
+
+		if (p_rx_curr_desc != NULL)
+			/* Add the assigned Ethernet address to the port's address table */
+			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
+					      p_eth_port_ctrl->port_mac_addr,
+					      queue);
+	}
+
+	/* Assign port configuration and command. */
+	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
+		      p_eth_port_ctrl->port_config);
+
+	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+		      p_eth_port_ctrl->port_config_extend);
+
+	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+		      p_eth_port_ctrl->port_serial_control);
+
+	MV_SET_REG_BITS (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+			 ETH_SERIAL_PORT_ENABLE);
+
+	/* Assign port SDMA configuration */
+	MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
+		      p_eth_port_ctrl->port_sdma_config);
+
+	MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
+		      (eth_port_num), 0x3fffffff);
+	MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
+		      (eth_port_num), 0x03fffcff);
+	/* Turn off the port/queue bandwidth limitation */
+	MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
+
+	/* Enable port Rx. */
+	MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
+		      p_eth_port_ctrl->port_rx_queue_command);
+
+	/* Check if link is up */
+	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+	if (!(phy_reg_data & 0x20))
+		return false;
+
+	return true;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr_set - This function Set the port Unicast address.
+*
+* DESCRIPTION:
+*		This function Set the port Ethernet MAC address.
+*
+* INPUT:
+*	ETH_PORT eth_port_num     Port number.
+*	char *        p_addr		Address to be set
+*	ETH_QUEUE 	  queue		Rx queue number for this MAC address.
+*
+* OUTPUT:
+*	Set MAC address low and high registers. also calls eth_port_uc_addr()
+*       To set the unicast table with the proper information.
+*
+* RETURN:
+*	N/A.
+*
+*******************************************************************************/
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+				  unsigned char *p_addr, ETH_QUEUE queue)
+{
+	unsigned int mac_h;
+	unsigned int mac_l;
+
+	mac_l = (p_addr[4] << 8) | (p_addr[5]);
+	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
+		(p_addr[2] << 8) | (p_addr[3] << 0);
+
+	MV_REG_WRITE (MV64360_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
+	MV_REG_WRITE (MV64360_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
+
+	/* Accept frames of this address */
+	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
+
+	return;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr - This function Set the port unicast address table
+*
+* DESCRIPTION:
+*	This function locates the proper entry in the Unicast table for the
+*	specified MAC nibble and sets its properties according to function
+*	parameters.
+*
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char uc_nibble		Unicast MAC Address last nibble.
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	This function add/removes MAC addresses from the port unicast address
+*	table.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_uc_addr (ETH_PORT eth_port_num,
+			      unsigned char uc_nibble,
+			      ETH_QUEUE queue, int option)
+{
+	unsigned int unicast_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the Unicast table entry */
+	uc_nibble = (0xf & uc_nibble);
+	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
+	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
+
+	switch (option) {
+	case REJECT_MAC_ADDR:
+		/* Clear accepts frame bit at specified unicast DA table entry */
+		unicast_reg =
+			MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+				      (eth_port_num)
+				      + tbl_offset));
+
+		unicast_reg &= (0x0E << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+			       (eth_port_num)
+			       + tbl_offset), unicast_reg);
+		break;
+
+	case ACCEPT_MAC_ADDR:
+		/* Set accepts frame bit at unicast DA filter table entry */
+		unicast_reg =
+			MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+				      (eth_port_num)
+				      + tbl_offset));
+
+		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+			       (eth_port_num)
+			       + tbl_offset), unicast_reg);
+
+		break;
+
+	default:
+		return false;
+	}
+	return true;
+}
+
+#if 0				/* FIXME */
+/*******************************************************************************
+* eth_port_mc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+*	This API controls the MV device MAC multicast support.
+*	The MV device supports multicast using two tables:
+*	1) Special Multicast Table for MAC addresses of the form
+*	   0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+*	   The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+*	   Table entries in the DA-Filter table.
+*	   In this case, the function calls eth_port_smc_addr() routine to set the
+*	   Special Multicast Table.
+*	2) Other Multicast Table for multicast of another type. A CRC-8bit
+*	   is used as an index to the Other Multicast Table entries in the
+*	   DA-Filter table.
+*	   In this case, the function calculates the CRC-8bit value and calls
+*	   eth_port_omc_addr() routine to set the Other Multicast Table.
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char 	*p_addr		Unicast MAC Address.
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	See description.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if add_address_table_entry( ) failed.
+*
+*******************************************************************************/
+static void eth_port_mc_addr (ETH_PORT eth_port_num,
+			      unsigned char *p_addr,
+			      ETH_QUEUE queue, int option)
+{
+	unsigned int mac_h;
+	unsigned int mac_l;
+	unsigned char crc_result = 0;
+	int mac_array[48];
+	int crc[8];
+	int i;
+
+
+	if ((p_addr[0] == 0x01) &&
+	    (p_addr[1] == 0x00) &&
+	    (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00))
+
+		eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
+	else {
+		/* Calculate CRC-8 out of the given address */
+		mac_h = (p_addr[0] << 8) | (p_addr[1]);
+		mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
+			(p_addr[4] << 8) | (p_addr[5] << 0);
+
+		for (i = 0; i < 32; i++)
+			mac_array[i] = (mac_l >> i) & 0x1;
+		for (i = 32; i < 48; i++)
+			mac_array[i] = (mac_h >> (i - 32)) & 0x1;
+
+
+		crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
+			mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
+			mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
+			mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
+			mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
+			mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
+			mac_array[6] ^ mac_array[0];
+
+		crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+			mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
+			mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
+			mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
+			mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
+			mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
+			mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
+			mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
+			mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
+			mac_array[0];
+
+		crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
+			mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
+			mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
+			mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
+			mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
+			mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
+			mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
+			mac_array[2] ^ mac_array[1] ^ mac_array[0];
+
+		crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
+			mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
+			mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
+			mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
+			mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
+			mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
+			mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
+			mac_array[2] ^ mac_array[1];
+
+		crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+			mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
+			mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
+			mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
+			mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
+			mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+			mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
+			mac_array[2];
+
+		crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
+			mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
+			mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
+			mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
+			mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
+			mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
+			mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
+			mac_array[3];
+
+		crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
+			mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
+			mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
+			mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
+			mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
+			mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+			mac_array[6] ^ mac_array[5] ^ mac_array[4];
+
+		crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
+			mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
+			mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
+			mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
+			mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
+			mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
+			mac_array[6] ^ mac_array[5];
+
+		for (i = 0; i < 8; i++)
+			crc_result = crc_result | (crc[i] << i);
+
+		eth_port_omc_addr (eth_port_num, crc_result, queue, option);
+	}
+	return;
+}
+
+/*******************************************************************************
+* eth_port_smc_addr - Special Multicast address settings.
+*
+* DESCRIPTION:
+*	This routine controls the MV device special MAC multicast support.
+*	The Special Multicast Table for MAC addresses supports MAC of the form
+*	0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+*	The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+*	Table entries in the DA-Filter table.
+*	This function set the Special Multicast Table appropriate entry
+*	according to the argument given.
+*
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char 	mc_byte		Multicast addr last byte (MAC DA[7:0] bits).
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	See description.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+			       unsigned char mc_byte,
+			       ETH_QUEUE queue, int option)
+{
+	unsigned int smc_table_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the SMC table entry */
+	tbl_offset = (mc_byte / 4) * 4;	/* Register offset from SMC table base */
+	reg_offset = mc_byte % 4;	/* Entry offset within the above register */
+	queue &= 0x7;
+
+	switch (option) {
+	case REJECT_MAC_ADDR:
+		/* Clear accepts frame bit at specified Special DA table entry */
+		smc_table_reg =
+			MV_REG_READ ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		smc_table_reg &= (0x0E << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+		break;
+
+	case ACCEPT_MAC_ADDR:
+		/* Set accepts frame bit at specified Special DA table entry */
+		smc_table_reg =
+			MV_REG_READ ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+		break;
+
+	default:
+		return false;
+	}
+	return true;
+}
+
+/*******************************************************************************
+* eth_port_omc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+*	This routine controls the MV device Other MAC multicast support.
+*	The Other Multicast Table is used for multicast of another type.
+*	A CRC-8bit is used as an index to the Other Multicast Table entries
+*	in the DA-Filter table.
+*	The function gets the CRC-8bit value from the calling routine and
+*      set the Other Multicast Table appropriate entry according to the
+*	CRC-8 argument given.
+*
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char 	  crc8		A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	See description.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+			       unsigned char crc8,
+			       ETH_QUEUE queue, int option)
+{
+	unsigned int omc_table_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the OMC table entry */
+	tbl_offset = (crc8 / 4) * 4;	/* Register offset from OMC table base */
+	reg_offset = crc8 % 4;	/* Entry offset within the above register */
+	queue &= 0x7;
+
+	switch (option) {
+	case REJECT_MAC_ADDR:
+		/* Clear accepts frame bit at specified Other DA table entry */
+		omc_table_reg =
+			MV_REG_READ ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		omc_table_reg &= (0x0E << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+		break;
+
+	case ACCEPT_MAC_ADDR:
+		/* Set accepts frame bit at specified Other DA table entry */
+		omc_table_reg =
+			MV_REG_READ ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+		break;
+
+	default:
+		return false;
+	}
+	return true;
+}
+#endif
+
+/*******************************************************************************
+* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
+*
+* DESCRIPTION:
+*       Go through all the DA filter tables (Unicast, Special Multicast & Other
+*       Multicast) and set each entry to 0.
+*
+* INPUT:
+*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+*       Multicast and Unicast packets are rejected.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
+{
+	int table_index;
+
+	/* Clear DA filter unicast table (Ex_dFUT) */
+	for (table_index = 0; table_index <= 0xC; table_index += 4)
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+			       (eth_port_num) + table_index), 0);
+
+	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
+		/* Clear DA filter special multicast table (Ex_dFSMT) */
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+		/* Clear DA filter other multicast table (Ex_dFOMT) */
+		MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+	}
+}
+
+/*******************************************************************************
+* eth_clear_mib_counters - Clear all MIB counters
+*
+* DESCRIPTION:
+*       This function clears all MIB counters of a specific ethernet port.
+*       A read from the MIB counter will reset the counter.
+*
+* INPUT:
+*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+*       After reading all MIB counters, the counters resets.
+*
+* RETURN:
+*       MIB counter value.
+*
+*******************************************************************************/
+static void eth_clear_mib_counters (ETH_PORT eth_port_num)
+{
+	int i;
+	unsigned int dummy;
+
+	/* Perform dummy reads from MIB counters */
+	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
+	     i += 4)
+		dummy = MV_REG_READ ((MV64360_ETH_MIB_COUNTERS_BASE
+				      (eth_port_num) + i));
+
+	return;
+}
+
+/*******************************************************************************
+* eth_read_mib_counter - Read a MIB counter
+*
+* DESCRIPTION:
+*       This function reads a MIB counter of a specific ethernet port.
+*       NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
+*       following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
+*       register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
+*       ETH_MIB_GOOD_OCTETS_SENT_HIGH
+*
+* INPUT:
+*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*       unsigned int mib_offset   MIB counter offset (use ETH_MIB_... macros).
+*
+* OUTPUT:
+*       After reading the MIB counter, the counter resets.
+*
+* RETURN:
+*       MIB counter value.
+*
+*******************************************************************************/
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+				   unsigned int mib_offset)
+{
+	return (MV_REG_READ (MV64360_ETH_MIB_COUNTERS_BASE (eth_port_num)
+			     + mib_offset));
+}
+
+/*******************************************************************************
+* ethernet_phy_set - Set the ethernet port PHY address.
+*
+* DESCRIPTION:
+*       This routine set the ethernet port PHY address according to given
+*       parameter.
+*
+* INPUT:
+*		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+*       Set PHY Address Register with given PHY address parameter.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
+{
+	unsigned int reg_data;
+
+	reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
+
+	reg_data &= ~(0x1F << (5 * eth_port_num));
+	reg_data |= (phy_addr << (5 * eth_port_num));
+
+	MV_REG_WRITE (MV64360_ETH_PHY_ADDR_REG, reg_data);
+
+	return;
+}
+
+/*******************************************************************************
+ * ethernet_phy_get - Get the ethernet port PHY address.
+ *
+ * DESCRIPTION:
+ *       This routine returns the given ethernet port PHY address.
+ *
+ * INPUT:
+ *		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       PHY address.
+ *
+ *******************************************************************************/
+static int ethernet_phy_get (ETH_PORT eth_port_num)
+{
+	unsigned int reg_data;
+
+	reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
+
+	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
+}
+
+/*******************************************************************************
+ * ethernet_phy_reset - Reset Ethernet port PHY.
+ *
+ * DESCRIPTION:
+ *       This routine utilize the SMI interface to reset the ethernet port PHY.
+ *       The routine waits until the link is up again or link up is timeout.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       The ethernet port PHY renew its link.
+ *
+ * RETURN:
+ *       None.
+ *
+*******************************************************************************/
+static bool ethernet_phy_reset (ETH_PORT eth_port_num)
+{
+	unsigned int time_out = 50;
+	unsigned int phy_reg_data;
+
+	/* Reset the PHY */
+	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
+	phy_reg_data |= 0x8000;	/* Set bit 15 to reset the PHY */
+	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
+
+	/* Poll on the PHY LINK */
+	do {
+		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+		if (time_out-- == 0)
+			return false;
+	}
+	while (!(phy_reg_data & 0x20));
+
+	return true;
+}
+
+/*******************************************************************************
+ * eth_port_reset - Reset Ethernet port
+ *
+ * DESCRIPTION:
+ * 	This routine resets the chip by aborting any SDMA engine activity and
+ *      clearing the MIB counters. The Receiver and the Transmit unit are in
+ *      idle state after this command is performed and the port is disabled.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       Channel activity is halted.
+ *
+ * RETURN:
+ *       None.
+ *
+ *******************************************************************************/
+static void eth_port_reset (ETH_PORT eth_port_num)
+{
+	unsigned int reg_data;
+
+	/* Stop Tx port activity. Check port Tx activity. */
+	reg_data =
+		MV_REG_READ (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
+			     (eth_port_num));
+
+	if (reg_data & 0xFF) {
+		/* Issue stop command for active channels only */
+		MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
+			      (eth_port_num), (reg_data << 8));
+
+		/* Wait for all Tx activity to terminate. */
+		do {
+			/* Check port cause register that all Tx queues are stopped */
+			reg_data =
+				MV_REG_READ
+				(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
+				 (eth_port_num));
+		}
+		while (reg_data & 0xFF);
+	}
+
+	/* Stop Rx port activity. Check port Rx activity. */
+	reg_data =
+		MV_REG_READ (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
+			     (eth_port_num));
+
+	if (reg_data & 0xFF) {
+		/* Issue stop command for active channels only */
+		MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
+			      (eth_port_num), (reg_data << 8));
+
+		/* Wait for all Rx activity to terminate. */
+		do {
+			/* Check port cause register that all Rx queues are stopped */
+			reg_data =
+				MV_REG_READ
+				(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
+				 (eth_port_num));
+		}
+		while (reg_data & 0xFF);
+	}
+
+
+	/* Clear all MIB counters */
+	eth_clear_mib_counters (eth_port_num);
+
+	/* Reset the Enable bit in the Configuration Register */
+	reg_data =
+		MV_REG_READ (MV64360_ETH_PORT_SERIAL_CONTROL_REG
+			     (eth_port_num));
+	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
+	MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+		      reg_data);
+
+	return;
+}
+
+#if 0				/* Not needed here */
+/*******************************************************************************
+ * ethernet_set_config_reg - Set specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ *       This function sets specified bits in the given ethernet
+ *       configuration register.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *      unsigned int    value   32 bit value.
+ *
+ * OUTPUT:
+ *      The set bits in the value parameter are set in the configuration
+ *      register.
+ *
+ * RETURN:
+ *      None.
+ *
+ *******************************************************************************/
+static void ethernet_set_config_reg (ETH_PORT eth_port_num,
+				     unsigned int value)
+{
+	unsigned int eth_config_reg;
+
+	eth_config_reg =
+		MV_REG_READ (MV64360_ETH_PORT_CONFIG_REG (eth_port_num));
+	eth_config_reg |= value;
+	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
+		      eth_config_reg);
+
+	return;
+}
+#endif
+
+#if 0				/* FIXME */
+/*******************************************************************************
+ * ethernet_reset_config_reg - Reset specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ *       This function resets specified bits in the given Ethernet
+ *       configuration register.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *      unsigned int    value   32 bit value.
+ *
+ * OUTPUT:
+ *      The set bits in the value parameter are reset in the configuration
+ *      register.
+ *
+ * RETURN:
+ *      None.
+ *
+ *******************************************************************************/
+static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
+				       unsigned int value)
+{
+	unsigned int eth_config_reg;
+
+	eth_config_reg = MV_REG_READ (MV64360_ETH_PORT_CONFIG_EXTEND_REG
+				      (eth_port_num));
+	eth_config_reg &= ~value;
+	MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+		      eth_config_reg);
+
+	return;
+}
+#endif
+
+#if 0				/* Not needed here */
+/*******************************************************************************
+ * ethernet_get_config_reg - Get the port configuration register
+ *
+ * DESCRIPTION:
+ *       This function returns the configuration register value of the given
+ *       ethernet port.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       Port configuration register value.
+ *
+ *******************************************************************************/
+static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
+{
+	unsigned int eth_config_reg;
+
+	eth_config_reg = MV_REG_READ (MV64360_ETH_PORT_CONFIG_EXTEND_REG
+				      (eth_port_num));
+	return eth_config_reg;
+}
+
+#endif
+
+/*******************************************************************************
+ * eth_port_read_smi_reg - Read PHY registers
+ *
+ * DESCRIPTION:
+ *       This routine utilize the SMI interface to interact with the PHY in
+ *       order to perform PHY register read.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *       unsigned int   phy_reg   PHY register address offset.
+ *       unsigned int   *value   Register value buffer.
+ *
+ * OUTPUT:
+ *       Write the value of a specified PHY register into given buffer.
+ *
+ * RETURN:
+ *       false if the PHY is busy or read data is not in valid state.
+ *       true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
+				   unsigned int phy_reg, unsigned int *value)
+{
+	unsigned int reg_value;
+	unsigned int time_out = PHY_BUSY_TIMEOUT;
+	int phy_addr;
+
+	phy_addr = ethernet_phy_get (eth_port_num);
+/*    printf("     Phy-Port %d has addess %d  \n",eth_port_num, phy_addr );*/
+
+	/* first check that it is not busy */
+	do {
+		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+		if (time_out-- == 0) {
+			return false;
+		}
+	}
+	while (reg_value & ETH_SMI_BUSY);
+
+	/* not busy */
+
+	MV_REG_WRITE (MV64360_ETH_SMI_REG,
+		      (phy_addr << 16) | (phy_reg << 21) |
+		      ETH_SMI_OPCODE_READ);
+
+	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
+
+	do {
+		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+		if (time_out-- == 0) {
+			return false;
+		}
+	}
+	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID);	/* Bit set equ operation done */
+
+	/* Wait for the data to update in the SMI register */
+#define PHY_UPDATE_TIMEOUT	10000
+	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
+
+	reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+
+	*value = reg_value & 0xffff;
+
+	return true;
+}
+
+/*******************************************************************************
+ * eth_port_write_smi_reg - Write to PHY registers
+ *
+ * DESCRIPTION:
+ *       This routine utilize the SMI interface to interact with the PHY in
+ *       order to perform writes to PHY registers.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *      unsigned int   phy_reg   PHY register address offset.
+ *      unsigned int    value   Register value.
+ *
+ * OUTPUT:
+ *      Write the given value to the specified PHY register.
+ *
+ * RETURN:
+ *      false if the PHY is busy.
+ *      true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
+				    unsigned int phy_reg, unsigned int value)
+{
+	unsigned int reg_value;
+	unsigned int time_out = PHY_BUSY_TIMEOUT;
+	int phy_addr;
+
+	phy_addr = ethernet_phy_get (eth_port_num);
+
+	/* first check that it is not busy */
+	do {
+		reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+		if (time_out-- == 0) {
+			return false;
+		}
+	}
+	while (reg_value & ETH_SMI_BUSY);
+
+	/* not busy */
+	MV_REG_WRITE (MV64360_ETH_SMI_REG,
+		      (phy_addr << 16) | (phy_reg << 21) |
+		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
+	return true;
+}
+
+/*******************************************************************************
+ * eth_set_access_control - Config address decode parameters for Ethernet unit
+ *
+ * DESCRIPTION:
+ *       This function configures the address decode parameters for the Gigabit
+ *       Ethernet Controller according the given parameters struct.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *       ETH_WIN_PARAM  *param   Address decode parameter struct.
+ *
+ * OUTPUT:
+ *       An access window is opened using the given access parameters.
+ *
+ * RETURN:
+ *       None.
+ *
+ *******************************************************************************/
+static void eth_set_access_control (ETH_PORT eth_port_num,
+				    ETH_WIN_PARAM * param)
+{
+	unsigned int access_prot_reg;
+
+	/* Set access control register */
+	access_prot_reg = MV_REG_READ (MV64360_ETH_ACCESS_PROTECTION_REG
+				       (eth_port_num));
+	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
+	access_prot_reg |= (param->access_ctrl << (param->win * 2));
+	MV_REG_WRITE (MV64360_ETH_ACCESS_PROTECTION_REG (eth_port_num),
+		      access_prot_reg);
+
+	/* Set window Size reg (SR) */
+	MV_REG_WRITE ((MV64360_ETH_SIZE_REG_0 +
+		       (ETH_SIZE_REG_GAP * param->win)),
+		      (((param->size / 0x10000) - 1) << 16));
+
+	/* Set window Base address reg (BA) */
+	MV_REG_WRITE ((MV64360_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
+		      (param->target | param->attributes | param->base_addr));
+	/* High address remap reg (HARR) */
+	if (param->win < 4)
+		MV_REG_WRITE ((MV64360_ETH_HIGH_ADDR_REMAP_REG_0 +
+			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
+			      param->high_addr);
+
+	/* Base address enable reg (BARER) */
+	if (param->enable == 1)
+		MV_RESET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
+				   (1 << param->win));
+	else
+		MV_SET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
+				 (1 << param->win));
+}
+
+/*******************************************************************************
+ * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ *       This function prepares a Rx chained list of descriptors and packet
+ *       buffers in a form of a ring. The routine must be called after port
+ *       initialization routine and before port start routine.
+ *       The Ethernet SDMA engine uses CPU bus addresses to access the various
+ *       devices in the system (i.e. DRAM). This function uses the ethernet
+ *       struct 'virtual to physical' routine (set by the user) to set the ring
+ *       with physical addresses.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *      int 			rx_desc_num       Number of Rx descriptors
+ *      int 			rx_buff_size      Size of Rx buffer
+ *      unsigned int    rx_desc_base_addr  Rx descriptors memory area base addr.
+ *      unsigned int    rx_buff_base_addr  Rx buffer memory area base addr.
+ *
+ * OUTPUT:
+ *      The routine updates the Ethernet port control struct with information
+ *      regarding the Rx descriptors and buffers.
+ *
+ * RETURN:
+ *      false if the given descriptors memory area is not aligned according to
+ *      Ethernet SDMA specifications.
+ *      true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+				     ETH_QUEUE rx_queue,
+				     int rx_desc_num,
+				     int rx_buff_size,
+				     unsigned int rx_desc_base_addr,
+				     unsigned int rx_buff_base_addr)
+{
+	ETH_RX_DESC *p_rx_desc;
+	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
+	unsigned int buffer_addr;
+	int ix;			/* a counter */
+
+
+	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
+	p_rx_prev_desc = p_rx_desc;
+	buffer_addr = rx_buff_base_addr;
+
+	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+	if (rx_buff_base_addr & 0xF)
+		return false;
+
+	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
+	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
+		return false;
+
+	/* Rx buffers must be 64-bit aligned.       */
+	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
+		return false;
+
+	/* initialize the Rx descriptors ring */
+	for (ix = 0; ix < rx_desc_num; ix++) {
+		p_rx_desc->buf_size = rx_buff_size;
+		p_rx_desc->byte_cnt = 0x0000;
+		p_rx_desc->cmd_sts =
+			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+		p_rx_desc->next_desc_ptr =
+			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
+		p_rx_desc->buf_ptr = buffer_addr;
+		p_rx_desc->return_info = 0x00000000;
+		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
+		buffer_addr += rx_buff_size;
+		p_rx_prev_desc = p_rx_desc;
+		p_rx_desc = (ETH_RX_DESC *)
+			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
+	}
+
+	/* Closing Rx descriptors ring */
+	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
+	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
+
+	/* Save Rx desc pointer to driver struct. */
+	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+
+	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
+		(ETH_RX_DESC *) rx_desc_base_addr;
+	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
+		rx_desc_num * RX_DESC_ALIGNED_SIZE;
+
+	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
+
+	return true;
+}
+
+/*******************************************************************************
+ * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ *       This function prepares a Tx chained list of descriptors and packet
+ *       buffers in a form of a ring. The routine must be called after port
+ *       initialization routine and before port start routine.
+ *       The Ethernet SDMA engine uses CPU bus addresses to access the various
+ *       devices in the system (i.e. DRAM). This function uses the ethernet
+ *       struct 'virtual to physical' routine (set by the user) to set the ring
+ *       with physical addresses.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *      int 			tx_desc_num       Number of Tx descriptors
+ *      int 			tx_buff_size      Size of Tx buffer
+ *      unsigned int    tx_desc_base_addr  Tx descriptors memory area base addr.
+ *      unsigned int    tx_buff_base_addr  Tx buffer memory area base addr.
+ *
+ * OUTPUT:
+ *      The routine updates the Ethernet port control struct with information
+ *      regarding the Tx descriptors and buffers.
+ *
+ * RETURN:
+ *      false if the given descriptors memory area is not aligned according to
+ *      Ethernet SDMA specifications.
+ *      true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+				     ETH_QUEUE tx_queue,
+				     int tx_desc_num,
+				     int tx_buff_size,
+				     unsigned int tx_desc_base_addr,
+				     unsigned int tx_buff_base_addr)
+{
+
+	ETH_TX_DESC *p_tx_desc;
+	ETH_TX_DESC *p_tx_prev_desc;
+	unsigned int buffer_addr;
+	int ix;			/* a counter */
+
+
+	/* save the first desc pointer to link with the last descriptor */
+	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
+	p_tx_prev_desc = p_tx_desc;
+	buffer_addr = tx_buff_base_addr;
+
+	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+	if (tx_buff_base_addr & 0xF)
+		return false;
+
+	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
+	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
+	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
+		return false;
+
+	/* Initialize the Tx descriptors ring */
+	for (ix = 0; ix < tx_desc_num; ix++) {
+		p_tx_desc->byte_cnt = 0x0000;
+		p_tx_desc->l4i_chk = 0x0000;
+		p_tx_desc->cmd_sts = 0x00000000;
+		p_tx_desc->next_desc_ptr =
+			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
+
+		p_tx_desc->buf_ptr = buffer_addr;
+		p_tx_desc->return_info = 0x00000000;
+		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
+		buffer_addr += tx_buff_size;
+		p_tx_prev_desc = p_tx_desc;
+		p_tx_desc = (ETH_TX_DESC *)
+			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
+
+	}
+	/* Closing Tx descriptors ring */
+	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
+	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
+	/* Set Tx desc pointer in driver struct. */
+	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+
+	/* Init Tx ring base and size parameters */
+	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
+		(ETH_TX_DESC *) tx_desc_base_addr;
+	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
+		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
+
+	/* Add the queue to the list of Tx queues of this port */
+	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
+
+	return true;
+}
+
+/*******************************************************************************
+ * eth_port_send - Send an Ethernet packet
+ *
+ * DESCRIPTION:
+ *	This routine send a given packet described by p_pktinfo parameter. It
+ *      supports transmitting of a packet spaned over multiple buffers. The
+ *      routine updates 'curr' and 'first' indexes according to the packet
+ *      segment passed to the routine. In case the packet segment is first,
+ *      the 'first' index is update. In any case, the 'curr' index is updated.
+ *      If the routine get into Tx resource error it assigns 'curr' index as
+ *      'first'. This way the function can abort Tx process of multiple
+ *      descriptors per packet.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *	PKT_INFO        *p_pkt_info       User packet buffer.
+ *
+ * OUTPUT:
+ *	Tx ring 'curr' and 'first' indexes are updated.
+ *
+ * RETURN:
+ *      ETH_QUEUE_FULL in case of Tx resource error.
+ *	ETH_ERROR in case the routine can not access Tx desc ring.
+ *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
+					  ETH_QUEUE tx_queue,
+					  PKT_INFO * p_pkt_info)
+{
+	volatile ETH_TX_DESC *p_tx_desc_first;
+	volatile ETH_TX_DESC *p_tx_desc_curr;
+	volatile ETH_TX_DESC *p_tx_next_desc_curr;
+	volatile ETH_TX_DESC *p_tx_desc_used;
+	unsigned int command_status;
+
+	/* Do not process Tx ring in case of Tx ring resource error */
+	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+		return ETH_QUEUE_FULL;
+
+	/* Get the Tx Desc ring indexes */
+	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
+	USED_TFD_GET (p_tx_desc_used, tx_queue);
+
+	if (p_tx_desc_curr == NULL)
+		return ETH_ERROR;
+
+	/* The following parameters are used to save readings from memory */
+	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
+	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
+
+	if (command_status & (ETH_TX_FIRST_DESC)) {
+		/* Update first desc */
+		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
+		p_tx_desc_first = p_tx_desc_curr;
+	} else {
+		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+		command_status |= ETH_BUFFER_OWNED_BY_DMA;
+	}
+
+	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
+	/* boundary. We use the memory allocated for Tx descriptor. This memory  */
+	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
+	if (p_pkt_info->byte_cnt <= 8) {
+		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
+		return ETH_ERROR;
+
+		p_tx_desc_curr->buf_ptr =
+			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
+		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
+			    p_pkt_info->byte_cnt);
+	} else
+		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
+
+	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
+	p_tx_desc_curr->return_info = p_pkt_info->return_info;
+
+	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
+		/* Set last desc with DMA ownership and interrupt enable. */
+		p_tx_desc_curr->cmd_sts = command_status |
+			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
+
+		if (p_tx_desc_curr != p_tx_desc_first)
+			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
+
+		/* Flush CPU pipe */
+
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
+		CPU_PIPE_FLUSH;
+
+		/* Apply send command */
+		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
+
+		/* Finish Tx packet. Update first desc in case of Tx resource error */
+		p_tx_desc_first = p_tx_next_desc_curr;
+		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
+
+	} else {
+		p_tx_desc_curr->cmd_sts = command_status;
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+	}
+
+	/* Check for ring index overlap in the Tx desc ring */
+	if (p_tx_next_desc_curr == p_tx_desc_used) {
+		/* Update the current descriptor */
+		CURR_TFD_SET (p_tx_desc_first, tx_queue);
+
+		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
+		return ETH_QUEUE_LAST_RESOURCE;
+	} else {
+		/* Update the current descriptor */
+		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
+		return ETH_OK;
+	}
+}
+
+/*******************************************************************************
+ * eth_tx_return_desc - Free all used Tx descriptors
+ *
+ * DESCRIPTION:
+ *	This routine returns the transmitted packet information to the caller.
+ *      It uses the 'first' index to support Tx desc return in case a transmit
+ *      of a packet spanned over multiple buffer still in process.
+ *      In case the Tx queue was in "resource error" condition, where there are
+ *      no available Tx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *	PKT_INFO        *p_pkt_info       User packet buffer.
+ *
+ * OUTPUT:
+ *	Tx ring 'first' and 'used' indexes are updated.
+ *
+ * RETURN:
+ *	ETH_ERROR in case the routine can not access Tx desc ring.
+ *      ETH_RETRY in case there is transmission in process.
+ *	ETH_END_OF_JOB if the routine has nothing to release.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
+					       p_eth_port_ctrl,
+					       ETH_QUEUE tx_queue,
+					       PKT_INFO * p_pkt_info)
+{
+	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
+	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
+	unsigned int command_status;
+
+
+	/* Get the Tx Desc ring indexes */
+	USED_TFD_GET (p_tx_desc_used, tx_queue);
+	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+
+
+	/* Sanity check */
+	if (p_tx_desc_used == NULL)
+		return ETH_ERROR;
+
+	command_status = p_tx_desc_used->cmd_sts;
+
+	/* Still transmitting... */
+	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+		return ETH_RETRY;
+	}
+
+	/* Stop release. About to overlap the current available Tx descriptor */
+	if ((p_tx_desc_used == p_tx_desc_first) &&
+	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+		return ETH_END_OF_JOB;
+	}
+
+	/* Pass the packet information to the caller */
+	p_pkt_info->cmd_sts = command_status;
+	p_pkt_info->return_info = p_tx_desc_used->return_info;
+	p_tx_desc_used->return_info = 0;
+
+	/* Update the next descriptor to release. */
+	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
+
+	/* Any Tx return cancels the Tx resource error status */
+	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
+
+	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+
+	return ETH_OK;
+
+}
+
+/*******************************************************************************
+ * eth_port_receive - Get received information from Rx ring.
+ *
+ * DESCRIPTION:
+ * 	This routine returns the received data to the caller. There is no
+ *	data copying during routine operation. All information is returned
+ *	using pointer to packet information struct passed from the caller.
+ *      If the routine exhausts	Rx ring resources then the resource error flag
+ *      is set.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *	PKT_INFO        *p_pkt_info       User packet buffer.
+ *
+ * OUTPUT:
+ *	Rx ring current and used indexes are updated.
+ *
+ * RETURN:
+ *	ETH_ERROR in case the routine can not access Rx desc ring.
+ *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
+ *	ETH_END_OF_JOB if there is no received data.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
+					     ETH_QUEUE rx_queue,
+					     PKT_INFO * p_pkt_info)
+{
+	volatile ETH_RX_DESC *p_rx_curr_desc;
+	volatile ETH_RX_DESC *p_rx_next_curr_desc;
+	volatile ETH_RX_DESC *p_rx_used_desc;
+	unsigned int command_status;
+
+	/* Do not process Rx ring in case of Rx ring resource error */
+	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
+		printf ("\nRx Queue is full ...\n");
+		return ETH_QUEUE_FULL;
+	}
+
+	/* Get the Rx Desc ring 'curr and 'used' indexes */
+	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
+	USED_RFD_GET (p_rx_used_desc, rx_queue);
+
+	/* Sanity check */
+	if (p_rx_curr_desc == NULL)
+		return ETH_ERROR;
+
+	/* The following parameters are used to save readings from memory */
+	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
+	command_status = p_rx_curr_desc->cmd_sts;
+
+	/* Nothing to receive... */
+	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+/* 	DP(printf("Rx: command_status: %08x\n", command_status)); */
+		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
+		return ETH_END_OF_JOB;
+	}
+
+	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
+	p_pkt_info->cmd_sts = command_status;
+	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
+	p_pkt_info->return_info = p_rx_curr_desc->return_info;
+	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size;	/* IP fragment indicator */
+
+	/* Clean the return info field to indicate that the packet has been */
+	/* moved to the upper layers                                        */
+	p_rx_curr_desc->return_info = 0;
+
+	/* Update 'curr' in data structure */
+	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
+
+	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
+	if (p_rx_next_curr_desc == p_rx_used_desc)
+		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
+
+	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+	CPU_PIPE_FLUSH;
+	return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
+ *
+ * DESCRIPTION:
+ *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
+ *      next 'used' descriptor and attached the returned buffer to it.
+ *      In case the Rx ring was in "resource error" condition, where there are
+ *      no available Rx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *      PKT_INFO        *p_pkt_info       Information on the returned buffer.
+ *
+ * OUTPUT:
+ *	New available Rx resource in Rx descriptor ring.
+ *
+ * RETURN:
+ *	ETH_ERROR in case the routine can not access Rx desc ring.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
+					       p_eth_port_ctrl,
+					       ETH_QUEUE rx_queue,
+					       PKT_INFO * p_pkt_info)
+{
+	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
+
+	/* Get 'used' Rx descriptor */
+	USED_RFD_GET (p_used_rx_desc, rx_queue);
+
+	/* Sanity check */
+	if (p_used_rx_desc == NULL)
+		return ETH_ERROR;
+
+	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
+	p_used_rx_desc->return_info = p_pkt_info->return_info;
+	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
+	p_used_rx_desc->buf_size = MV64360_RX_BUFFER_SIZE;	/* Reset Buffer size */
+
+	/* Flush the write pipe */
+	CPU_PIPE_FLUSH;
+
+	/* Return the descriptor to DMA ownership */
+	p_used_rx_desc->cmd_sts =
+		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+
+	/* Flush descriptor and CPU pipe */
+	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
+	CPU_PIPE_FLUSH;
+
+	/* Move the used descriptor pointer to the next descriptor */
+	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
+
+	/* Any Rx return cancels the Rx resource error status */
+	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
+		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
+
+	return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
+ *
+ * DESCRIPTION:
+ *	This routine sets the RX coalescing interrupt mechanism parameter.
+ *	This parameter is a timeout counter, that counts in 64 t_clk
+ *	chunks ; that when timeout event occurs a maskable interrupt
+ *	occurs.
+ *	The parameter is calculated using the tClk of the MV-643xx chip
+ *	, and the required delay of the interrupt in usec.
+ *
+ * INPUT:
+ *	ETH_PORT eth_port_num      Ethernet port number
+ *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
+ *	unsigned int delay       Delay in usec
+ *
+ * OUTPUT:
+ *	Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ *	The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0				/* FIXME */
+static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
+					  unsigned int t_clk,
+					  unsigned int delay)
+{
+	unsigned int coal;
+
+	coal = ((t_clk / 1000000) * delay) / 64;
+	/* Set RX Coalescing mechanism */
+	MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
+		      ((coal & 0x3fff) << 8) |
+		      (MV_REG_READ
+		       (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num))
+		       & 0xffc000ff));
+	return coal;
+}
+
+#endif
+/*******************************************************************************
+ * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
+ *
+ * DESCRIPTION:
+ *	This routine sets the TX coalescing interrupt mechanism parameter.
+ *	This parameter is a timeout counter, that counts in 64 t_clk
+ *	chunks ; that when timeout event occurs a maskable interrupt
+ *	occurs.
+ *	The parameter is calculated using the t_cLK frequency of the
+ *	MV-643xx chip and the required delay in the interrupt in uSec
+ *
+ * INPUT:
+ *	ETH_PORT eth_port_num      Ethernet port number
+ *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
+ *	unsigned int delay       Delay in uSeconds
+ *
+ * OUTPUT:
+ *	Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ *	The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0				/* FIXME */
+static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
+					  unsigned int t_clk,
+					  unsigned int delay)
+{
+	unsigned int coal;
+
+	coal = ((t_clk / 1000000) * delay) / 64;
+	/* Set TX Coalescing mechanism */
+	MV_REG_WRITE (MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
+		      coal << 4);
+	return coal;
+}
+#endif
+
+/*******************************************************************************
+ * eth_b_copy - Copy bytes from source to destination
+ *
+ * DESCRIPTION:
+ *       This function supports the eight bytes limitation on Tx buffer size.
+ *       The routine will zero eight bytes starting from the destination address
+ *       followed by copying bytes from the source address to the destination.
+ *
+ * INPUT:
+ *       unsigned int src_addr    32 bit source address.
+ *       unsigned int dst_addr    32 bit destination address.
+ *       int        byte_count    Number of bytes to copy.
+ *
+ * OUTPUT:
+ *       See description.
+ *
+ * RETURN:
+ *       None.
+ *
+ *******************************************************************************/
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+			int byte_count)
+{
+	/* Zero the dst_addr area */
+	*(unsigned int *) dst_addr = 0x0;
+
+	while (byte_count != 0) {
+		*(char *) dst_addr = *(char *) src_addr;
+		dst_addr++;
+		src_addr++;
+		byte_count--;
+	}
+}
diff --git a/board/Marvell/db64360/mv_eth.h b/board/Marvell/db64360/mv_eth.h
new file mode 100644
index 0000000000..943d30b34a
--- /dev/null
+++ b/board/Marvell/db64360/mv_eth.h
@@ -0,0 +1,844 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __DB64360_ETH_H__
+#define __DB64360_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+#include <net.h>
+#include "mv_regs.h"
+#include "../common/ppc_error_no.h"
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The first part is the high level driver of the gigE ethernet ports.	 *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
+#ifndef MAX_SKB_FRAGS
+#define MAX_SKB_FRAGS 0
+#endif
+
+/* Port attributes */
+/*#define MAX_RX_QUEUE_NUM	8*/
+/*#define MAX_TX_QUEUE_NUM	8*/
+#define MAX_RX_QUEUE_NUM	1
+#define MAX_TX_QUEUE_NUM	1
+
+
+/* Use one TX queue and one RX queue */
+#define MV64360_TX_QUEUE_NUM 1
+#define MV64360_RX_QUEUE_NUM 1
+
+/*
+ * Number of RX / TX descriptors on RX / TX rings.
+ * Note that allocating RX descriptors is done by allocating the RX
+ * ring AND a preallocated RX buffers (skb's) for each descriptor.
+ * The TX descriptors only allocates the TX descriptors ring,
+ * with no pre allocated TX buffers (skb's are allocated by higher layers.
+ */
+
+/* Default TX ring size is 10 descriptors */
+#ifdef CONFIG_MV64360_ETH_TXQUEUE_SIZE
+#define MV64360_TX_QUEUE_SIZE CONFIG_MV64360_ETH_TXQUEUE_SIZE
+#else
+#define MV64360_TX_QUEUE_SIZE 4
+#endif
+
+/* Default RX ring size is 4 descriptors */
+#ifdef	CONFIG_MV64360_ETH_RXQUEUE_SIZE
+#define MV64360_RX_QUEUE_SIZE CONFIG_MV64360_ETH_RXQUEUE_SIZE
+#else
+#define MV64360_RX_QUEUE_SIZE 4
+#endif
+
+#ifdef CONFIG_RX_BUFFER_SIZE
+#define MV64360_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
+#else
+#define MV64360_RX_BUFFER_SIZE 1600
+#endif
+
+#ifdef CONFIG_TX_BUFFER_SIZE
+#define MV64360_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
+#else
+#define MV64360_TX_BUFFER_SIZE 1600
+#endif
+
+
+/*
+ *	Network device statistics. Akin to the 2.0 ether stats but
+ *	with byte counters.
+ */
+
+struct net_device_stats
+{
+	unsigned long	rx_packets;		/* total packets received	*/
+	unsigned long	tx_packets;		/* total packets transmitted	*/
+	unsigned long	rx_bytes;		/* total bytes received		*/
+	unsigned long	tx_bytes;		/* total bytes transmitted	*/
+	unsigned long	rx_errors;		/* bad packets received		*/
+	unsigned long	tx_errors;		/* packet transmit problems	*/
+	unsigned long	rx_dropped;		/* no space in linux buffers	*/
+	unsigned long	tx_dropped;		/* no space available in linux	*/
+	unsigned long	multicast;		/* multicast packets received	*/
+	unsigned long	collisions;
+
+	/* detailed rx_errors: */
+	unsigned long	rx_length_errors;
+	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
+	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
+	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
+	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	unsigned long	tx_aborted_errors;
+	unsigned long	tx_carrier_errors;
+	unsigned long	tx_fifo_errors;
+	unsigned long	tx_heartbeat_errors;
+	unsigned long	tx_window_errors;
+
+	/* for cslip etc */
+	unsigned long	rx_compressed;
+	unsigned long	tx_compressed;
+};
+
+
+/* Private data structure used for ethernet device */
+struct mv64360_eth_priv {
+    unsigned int port_num;
+    struct net_device_stats *stats;
+
+/* to buffer area aligned */
+    char * p_eth_tx_buffer[MV64360_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
+    char * p_eth_rx_buffer[MV64360_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
+
+    /* Size of Tx Ring per queue */
+    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
+
+
+    /* Size of Rx Ring per queue */
+    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
+
+    /* Magic Number for Ethernet running */
+    unsigned int eth_running;
+
+};
+
+
+int mv64360_eth_init (struct eth_device *dev);
+int mv64360_eth_stop (struct eth_device *dev);
+int mv64360_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
+/*	return db64360_eth0_poll(); */
+
+int mv64360_eth_open (struct eth_device *dev);
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The second part is the low level driver of the gigE ethernet ports.	 *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+
+/********************************************************************************
+ * Header File for : MV-643xx network interface header
+ *
+ * DESCRIPTION:
+ *	 This header file contains macros typedefs and function declaration for
+ *	 the Marvell Gig Bit Ethernet Controller.
+ *
+ * DEPENDENCIES:
+ *	 None.
+ *
+ *******************************************************************************/
+
+
+#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
+#ifdef CONFIG_MV64360_SRAM_CACHEABLE
+/* In case SRAM is cacheable but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset)       \
+{		    \
+  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case SRAM is cache coherent or non-cacheable */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif
+#else
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/* In case of descriptors on DDR but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset)       \
+{		    \
+  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case of descriptors on DDR and cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
+
+
+#define CPU_PIPE_FLUSH		   \
+{		  \
+  __asm__ __volatile__ ("eieio");	  \
+}
+
+
+/* defines  */
+
+/* Default port configuration value */
+#define PORT_CONFIG_VALUE			\
+	     ETH_UNICAST_NORMAL_MODE		|   \
+	     ETH_DEFAULT_RX_QUEUE_0		|   \
+	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
+	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
+	     ETH_RECEIVE_BC_IF_IP		|   \
+	     ETH_RECEIVE_BC_IF_ARP		|   \
+	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
+	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
+	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
+	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
+	     ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+/* Default port extend configuration value */
+#define PORT_CONFIG_EXTEND_VALUE		\
+	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
+	     ETH_PARTITION_DISABLE
+
+
+/* Default sdma control value */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define PORT_SDMA_CONFIG_VALUE				\
+			 ETH_RX_BURST_SIZE_16_64BIT	|	\
+			 GT_ETH_IPG_INT_RX(0)			|	\
+			 ETH_TX_BURST_SIZE_16_64BIT;
+#else
+#define PORT_SDMA_CONFIG_VALUE			\
+			 ETH_RX_BURST_SIZE_4_64BIT	|	\
+			 GT_ETH_IPG_INT_RX(0)			|	\
+			 ETH_TX_BURST_SIZE_4_64BIT;
+#endif
+
+#define GT_ETH_IPG_INT_RX(value)		\
+	    ((value & 0x3fff) << 8)
+
+/* Default port serial control value */
+#define PORT_SERIAL_CONTROL_VALUE			    \
+			ETH_FORCE_LINK_PASS			|	\
+			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
+			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
+			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
+			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
+			ETH_FORCE_BP_MODE_NO_JAM		|	\
+			BIT9					|	\
+			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
+			ETH_RETRANSMIT_16_ETTEMPTS		|	\
+			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
+			ETH_DTE_ADV_0				|	\
+			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
+			ETH_AUTO_NEG_NO_CHANGE			|	\
+			ETH_MAX_RX_PACKET_1552BYTE		|	\
+			ETH_CLR_EXT_LOOPBACK			|	\
+			ETH_SET_FULL_DUPLEX_MODE		|	\
+			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
+
+#define RX_BUFFER_MAX_SIZE  0xFFFF
+#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
+
+#define RX_BUFFER_MIN_SIZE  0x8
+#define TX_BUFFER_MIN_SIZE  0x8
+
+/* Tx WRR confoguration macros */
+#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
+#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
+#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
+
+/* MAC accepet/reject macros */
+#define ACCEPT_MAC_ADDR	    0
+#define REJECT_MAC_ADDR	    1
+
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define RX_DESC_ALIGNED_SIZE		0x20
+#define TX_DESC_ALIGNED_SIZE		0x20
+
+/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
+#define TX_BUF_OFFSET_IN_DESC	    0x18
+/* Buffer offset from buffer pointer */
+#define RX_BUF_OFFSET				0x2
+
+/* Gap define */
+#define ETH_BAR_GAP					0x8
+#define ETH_SIZE_REG_GAP				0x8
+#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
+#define ETH_PORT_ACCESS_CTRL_GAP			0x4
+
+/* Gigabit Ethernet Unit Global Registers */
+
+/* MIB Counters register definitions */
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
+#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
+#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
+#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
+#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
+#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
+#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
+#define ETH_MIB_FRAMES_64_OCTETS	   0x20
+#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
+#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
+#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
+#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
+#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
+#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
+#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
+#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
+#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
+#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
+#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
+#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
+#define ETH_MIB_FC_SENT			   0x54
+#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
+#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
+#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
+#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
+#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
+#define ETH_MIB_JABBER_RECEIVED		   0x6c
+#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
+#define ETH_MIB_BAD_CRC_EVENT		   0x74
+#define ETH_MIB_COLLISION		   0x78
+#define ETH_MIB_LATE_COLLISION		   0x7c
+
+/* Port serial status reg (PSR) */
+#define ETH_INTERFACE_GMII_MII				0
+#define ETH_INTERFACE_PCM				BIT0
+#define ETH_LINK_IS_DOWN				0
+#define ETH_LINK_IS_UP					BIT1
+#define ETH_PORT_AT_HALF_DUPLEX				0
+#define ETH_PORT_AT_FULL_DUPLEX				BIT2
+#define ETH_RX_FLOW_CTRL_DISABLED			0
+#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
+#define ETH_GMII_SPEED_100_10				0
+#define ETH_GMII_SPEED_1000				BIT4
+#define ETH_MII_SPEED_10				0
+#define ETH_MII_SPEED_100				BIT5
+#define ETH_NO_TX					0
+#define ETH_TX_IN_PROGRESS				BIT7
+#define ETH_BYPASS_NO_ACTIVE				0
+#define ETH_BYPASS_ACTIVE				BIT8
+#define ETH_PORT_NOT_AT_PARTITION_STATE			0
+#define ETH_PORT_AT_PARTITION_STATE			BIT9
+#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
+#define ETH_PORT_TX_FIFO_EMPTY				BIT10
+
+
+/* These macros describes the Port configuration reg (Px_cR) bits */
+#define ETH_UNICAST_NORMAL_MODE				0
+#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
+#define ETH_DEFAULT_RX_QUEUE_0				0
+#define ETH_DEFAULT_RX_QUEUE_1				BIT1
+#define ETH_DEFAULT_RX_QUEUE_2				BIT2
+#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_4				BIT3
+#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
+#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
+#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
+#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
+#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
+#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
+#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
+#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
+#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
+#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
+#define ETH_RECEIVE_BC_IF_IP				0
+#define ETH_REJECT_BC_IF_IP				BIT8
+#define ETH_RECEIVE_BC_IF_ARP				0
+#define ETH_REJECT_BC_IF_ARP				BIT9
+#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
+#define ETH_CAPTURE_TCP_FRAMES_DIS			0
+#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
+#define ETH_CAPTURE_UDP_FRAMES_DIS			0
+#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
+#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
+#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
+#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
+#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
+#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
+#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
+#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
+#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
+#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
+#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
+#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
+#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
+#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
+#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
+#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
+#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
+
+
+/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
+#define ETH_CLASSIFY_EN					BIT0
+#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
+#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
+#define ETH_PARTITION_DISABLE				0
+#define ETH_PARTITION_ENABLE				BIT2
+
+
+/* Tx/Rx queue command reg (RQCR/TQCR)*/
+#define ETH_QUEUE_0_ENABLE				BIT0
+#define ETH_QUEUE_1_ENABLE				BIT1
+#define ETH_QUEUE_2_ENABLE				BIT2
+#define ETH_QUEUE_3_ENABLE				BIT3
+#define ETH_QUEUE_4_ENABLE				BIT4
+#define ETH_QUEUE_5_ENABLE				BIT5
+#define ETH_QUEUE_6_ENABLE				BIT6
+#define ETH_QUEUE_7_ENABLE				BIT7
+#define ETH_QUEUE_0_DISABLE				BIT8
+#define ETH_QUEUE_1_DISABLE				BIT9
+#define ETH_QUEUE_2_DISABLE				BIT10
+#define ETH_QUEUE_3_DISABLE				BIT11
+#define ETH_QUEUE_4_DISABLE				BIT12
+#define ETH_QUEUE_5_DISABLE				BIT13
+#define ETH_QUEUE_6_DISABLE				BIT14
+#define ETH_QUEUE_7_DISABLE				BIT15
+
+
+/* These macros describes the Port Sdma configuration reg (SDCR) bits */
+#define ETH_RIFB					BIT0
+#define ETH_RX_BURST_SIZE_1_64BIT			0
+#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
+#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
+#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
+#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
+#define ETH_BLM_RX_NO_SWAP				BIT4
+#define ETH_BLM_RX_BYTE_SWAP				0
+#define ETH_BLM_TX_NO_SWAP				BIT5
+#define ETH_BLM_TX_BYTE_SWAP				0
+#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
+#define ETH_DESCRIPTORS_NO_SWAP				0
+#define ETH_TX_BURST_SIZE_1_64BIT			0
+#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
+#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
+#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
+#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
+
+
+/* These macros describes the Port serial control reg (PSCR) bits */
+#define ETH_SERIAL_PORT_DISABLE				0
+#define ETH_SERIAL_PORT_ENABLE				BIT0
+#define ETH_FORCE_LINK_PASS				BIT1
+#define ETH_DO_NOT_FORCE_LINK_PASS			0
+#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
+#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
+#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
+#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
+#define ETH_ADV_NO_FLOW_CTRL				0
+#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
+#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
+#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
+#define ETH_FORCE_BP_MODE_NO_JAM			0
+#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
+#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
+#define ETH_FORCE_LINK_FAIL				0
+#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
+#define ETH_RETRANSMIT_16_ETTEMPTS			0
+#define ETH_RETRANSMIT_FOREVER				BIT11
+#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
+#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
+#define ETH_DTE_ADV_0					0
+#define ETH_DTE_ADV_1					BIT14
+#define ETH_DISABLE_AUTO_NEG_BYPASS			0
+#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
+#define ETH_AUTO_NEG_NO_CHANGE				0
+#define ETH_RESTART_AUTO_NEG				BIT16
+#define ETH_MAX_RX_PACKET_1518BYTE			0
+#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
+#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
+#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
+#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
+#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
+#define ETH_SET_EXT_LOOPBACK				BIT20
+#define ETH_CLR_EXT_LOOPBACK				0
+#define ETH_SET_FULL_DUPLEX_MODE			BIT21
+#define ETH_SET_HALF_DUPLEX_MODE			0
+#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
+#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
+#define ETH_SET_GMII_SPEED_TO_10_100			0
+#define ETH_SET_GMII_SPEED_TO_1000			BIT23
+#define ETH_SET_MII_SPEED_TO_10				0
+#define ETH_SET_MII_SPEED_TO_100			BIT24
+
+
+/* SMI reg */
+#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
+#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
+#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
+#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
+
+/* SDMA command status fields macros */
+
+/* Tx & Rx descriptors status */
+#define ETH_ERROR_SUMMARY		    (BIT0)
+
+/* Tx & Rx descriptors command */
+#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
+
+/* Tx descriptors status */
+#define ETH_LC_ERROR			    (0	  )
+#define ETH_UR_ERROR			    (BIT1 )
+#define ETH_RL_ERROR			    (BIT2 )
+#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
+
+/* Rx descriptors status */
+#define ETH_CRC_ERROR			    (0	  )
+#define ETH_OVERRUN_ERROR		    (BIT1 )
+#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
+#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
+#define ETH_VLAN_TAGGED			    (BIT19)
+#define ETH_BPDU_FRAME			    (BIT20)
+#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
+#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
+#define ETH_OTHER_FRAME_TYPE		    (BIT22)
+#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
+#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
+#define ETH_FRAME_HEADER_OK		    (BIT25)
+#define ETH_RX_LAST_DESC		    (BIT26)
+#define ETH_RX_FIRST_DESC		    (BIT27)
+#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
+#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
+#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
+
+/* Rx descriptors byte count */
+#define ETH_FRAME_FRAGMENTED		    (BIT2)
+
+/* Tx descriptors command */
+#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
+#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
+#define ETH_TCP_FRAME			    (0	  )
+#define ETH_UDP_FRAME			    (BIT16)
+#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
+#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
+#define ETH_ZERO_PADDING		    (BIT19)
+#define ETH_TX_LAST_DESC		    (BIT20)
+#define ETH_TX_FIRST_DESC		    (BIT21)
+#define ETH_GEN_CRC			    (BIT22)
+#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
+#define ETH_AUTO_MODE			    (BIT30)
+
+/* Address decode parameters */
+/* Ethernet Base Address Register bits */
+#define EBAR_TARGET_DRAM					0x00000000
+#define EBAR_TARGET_DEVICE					0x00000001
+#define EBAR_TARGET_CBS						0x00000002
+#define EBAR_TARGET_PCI0					0x00000003
+#define EBAR_TARGET_PCI1					0x00000004
+#define EBAR_TARGET_CUNIT					0x00000005
+#define EBAR_TARGET_AUNIT					0x00000006
+#define EBAR_TARGET_GUNIT					0x00000007
+
+/* Window attributes */
+#define EBAR_ATTR_DRAM_CS0					0x00000E00
+#define EBAR_ATTR_DRAM_CS1					0x00000D00
+#define EBAR_ATTR_DRAM_CS2					0x00000B00
+#define EBAR_ATTR_DRAM_CS3					0x00000700
+
+/* DRAM Target interface */
+#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
+
+/* Device Bus Target interface */
+#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
+#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
+#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
+#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
+#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
+
+/* PCI Target interface */
+#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
+#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
+#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
+#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
+#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
+#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
+#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
+#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
+#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
+#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
+
+/* CPU 60x bus or internal SRAM interface */
+#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
+#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
+#define EBAR_ATTR_CBS_SRAM					0x00000000
+#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
+
+/* Window access control */
+#define EWIN_ACCESS_NOT_ALLOWED 0
+#define EWIN_ACCESS_READ_ONLY	BIT0
+#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
+#define EWIN0_ACCESS_MASK		0x0003
+#define EWIN1_ACCESS_MASK		0x000C
+#define EWIN2_ACCESS_MASK		0x0030
+#define EWIN3_ACCESS_MASK		0x00C0
+
+/* typedefs */
+
+typedef enum _eth_port
+{
+    ETH_0 = 0,
+	ETH_1 = 1,
+	ETH_2 = 2
+}ETH_PORT;
+
+typedef enum _eth_func_ret_status
+{
+    ETH_OK,			/* Returned as expected.		    */
+    ETH_ERROR,			/* Fundamental error.			    */
+    ETH_RETRY,			/* Could not process request. Try later.    */
+    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
+    ETH_QUEUE_FULL,		/* Ring resource error.			    */
+    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
+}ETH_FUNC_RET_STATUS;
+
+typedef enum _eth_queue
+{
+	ETH_Q0 = 0,
+	ETH_Q1 = 1,
+	ETH_Q2 = 2,
+	ETH_Q3 = 3,
+	ETH_Q4 = 4,
+	ETH_Q5 = 5,
+	ETH_Q6 = 6,
+    ETH_Q7 = 7
+} ETH_QUEUE;
+
+typedef enum _addr_win
+{
+	ETH_WIN0,
+	ETH_WIN1,
+	ETH_WIN2,
+	ETH_WIN3,
+	ETH_WIN4,
+    ETH_WIN5
+} ETH_ADDR_WIN;
+
+typedef enum _eth_target
+{
+	ETH_TARGET_DRAM	 ,
+	ETH_TARGET_DEVICE,
+	ETH_TARGET_CBS	 ,
+	ETH_TARGET_PCI0	 ,
+	ETH_TARGET_PCI1
+}ETH_TARGET;
+
+typedef struct _eth_rx_desc
+{
+	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
+	unsigned short	buf_size	   ;	/* Buffer size			    */
+	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
+	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
+	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
+    unsigned int    return_info ;    /* User resource return information */
+} ETH_RX_DESC;
+
+
+typedef struct _eth_tx_desc
+{
+    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
+    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
+    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
+    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
+    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
+    unsigned int    return_info ;    /* User resource return information */
+} ETH_TX_DESC;
+
+/* Unified struct for Rx and Tx operations. The user is not required to */
+/* be familier with neither Tx nor Rx descriptors.			 */
+typedef struct _pkt_info
+{
+	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
+	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
+	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
+	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
+    unsigned int    return_info ;    /* User resource return information */
+} PKT_INFO;
+
+
+typedef struct _eth_win_param
+{
+    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
+    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
+    unsigned short attributes;	/* BAR attributes. See above macros. */
+    unsigned int base_addr; /* Window base address in unsigned int form */
+    unsigned int high_addr; /* Window high address in unsigned int form */
+    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
+    bool enable; /* Enable/disable access to the window. */
+    unsigned short access_ctrl; /* Access ctrl register. see above macros */
+} ETH_WIN_PARAM;
+
+
+/* Ethernet port specific infomation */
+
+typedef struct _eth_port_ctrl
+{
+    ETH_PORT  port_num; /* User Ethernet port number */
+    int port_phy_addr;	/* User phy address of Ethrnet port */
+    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
+    unsigned int  port_config; /* User port configuration value */
+    unsigned int  port_config_extend; /* User port config extend value */
+    unsigned int  port_sdma_config; /* User port SDMA config value */
+    unsigned int  port_serial_control; /* User port serial control value */
+    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
+    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
+
+    /* User function to cast virtual address to CPU bus address */
+    unsigned int  (*port_virt_to_phys)(unsigned int addr);
+    /* User scratch pad for user specific data structures */
+    void *port_private;
+
+    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
+    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
+
+    /* Tx/Rx rings managment indexes fields. For driver use */
+
+    /* Next available Rx resource */
+    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
+    /* Returning Rx resource */
+    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
+
+    /* Next available Tx resource */
+    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
+    /* Returning Tx resource */
+    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
+    /* An extra Tx index to support transmit of multiple buffers per packet */
+    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
+
+    /* Tx/Rx rings size and base variables fields. For driver use */
+
+    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
+    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
+    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
+
+    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
+    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
+    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
+
+} ETH_PORT_INFO;
+
+
+/* ethernet.h API list */
+
+/* Port operation control routines */
+static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
+static void eth_port_reset(ETH_PORT	eth_port_num);
+static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
+
+
+/* Port MAC address routines */
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+				  unsigned char *p_addr,
+				  ETH_QUEUE queue);
+#if 0	/* FIXME */
+static void eth_port_mc_addr	(ETH_PORT eth_port_num,
+				 unsigned char *p_addr,
+				 ETH_QUEUE queue,
+				 int option);
+#endif
+
+/* PHY and MIB routines */
+static bool ethernet_phy_reset(ETH_PORT eth_port_num);
+
+static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
+				   unsigned int phy_reg,
+				   unsigned int value);
+
+static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
+				  unsigned int phy_reg,
+				  unsigned int* value);
+
+static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
+
+/* Port data flow control routines */
+static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
+					     ETH_QUEUE tx_queue,
+					     PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
+					      ETH_QUEUE tx_queue,
+					      PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
+					     ETH_QUEUE rx_queue,
+					     PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
+					      ETH_QUEUE rx_queue,
+					      PKT_INFO *p_pkt_info);
+
+
+static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
+				    ETH_QUEUE	tx_queue,
+				    int				tx_desc_num,
+				    int				tx_buff_size,
+				    unsigned int	tx_desc_base_addr,
+				    unsigned int	tx_buff_base_addr);
+
+static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
+				    ETH_QUEUE	rx_queue,
+				    int				rx_desc_num,
+				    int				rx_buff_size,
+				    unsigned int	rx_desc_base_addr,
+				    unsigned int	rx_buff_base_addr);
+
+#endif /* MV64360_ETH_ */
diff --git a/board/Marvell/db64360/mv_regs.h b/board/Marvell/db64360/mv_regs.h
new file mode 100644
index 0000000000..0d6370b52c
--- /dev/null
+++ b/board/Marvell/db64360/mv_regs.h
@@ -0,0 +1,1124 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/********************************************************************************
+* gt64360r.h - GT-64360 Internal registers definition file.
+*
+* DESCRIPTION:
+*	None.
+*
+* DEPENDENCIES:
+*	None.
+*
+*******************************************************************************/
+
+#ifndef __INCmv_regsh
+#define __INCmv_regsh
+
+#define MV64360
+
+/* Supported by the Atlantis */
+#define MV64360_INCLUDE_PCI_1
+#define MV64360_INCLUDE_PCI_0_ARBITER
+#define MV64360_INCLUDE_PCI_1_ARBITER
+#define MV64360_INCLUDE_SNOOP_SUPPORT
+#define MV64360_INCLUDE_P2P
+#define MV64360_INCLUDE_ETH_PORT_2
+#define MV64360_INCLUDE_CPU_MAPPING
+#define MV64360_INCLUDE_MPSC
+
+/* Not supported features */
+#undef	INCLUDE_CNTMR_4_7
+#undef	INCLUDE_DMA_4_7
+
+/****************************************/
+/* Processor Address Space		*/
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64360_CS_0_BASE_ADDR					    0x008
+#define MV64360_CS_0_SIZE					    0x010
+#define MV64360_CS_1_BASE_ADDR					    0x208
+#define MV64360_CS_1_SIZE					    0x210
+#define MV64360_CS_2_BASE_ADDR					    0x018
+#define MV64360_CS_2_SIZE					    0x020
+#define MV64360_CS_3_BASE_ADDR					    0x218
+#define MV64360_CS_3_SIZE					    0x220
+
+/* Devices BAR and size registers */
+
+#define MV64360_DEV_CS0_BASE_ADDR				    0x028
+#define MV64360_DEV_CS0_SIZE					    0x030
+#define MV64360_DEV_CS1_BASE_ADDR				    0x228
+#define MV64360_DEV_CS1_SIZE					    0x230
+#define MV64360_DEV_CS2_BASE_ADDR				    0x248
+#define MV64360_DEV_CS2_SIZE					    0x250
+#define MV64360_DEV_CS3_BASE_ADDR				    0x038
+#define MV64360_DEV_CS3_SIZE					    0x040
+#define MV64360_BOOTCS_BASE_ADDR				    0x238
+#define MV64360_BOOTCS_SIZE					    0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64360_PCI_0_IO_BASE_ADDR				    0x048
+#define MV64360_PCI_0_IO_SIZE					    0x050
+#define MV64360_PCI_0_MEMORY0_BASE_ADDR				    0x058
+#define MV64360_PCI_0_MEMORY0_SIZE				    0x060
+#define MV64360_PCI_0_MEMORY1_BASE_ADDR				    0x080
+#define MV64360_PCI_0_MEMORY1_SIZE				    0x088
+#define MV64360_PCI_0_MEMORY2_BASE_ADDR				    0x258
+#define MV64360_PCI_0_MEMORY2_SIZE				    0x260
+#define MV64360_PCI_0_MEMORY3_BASE_ADDR				    0x280
+#define MV64360_PCI_0_MEMORY3_SIZE				    0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64360_PCI_1_IO_BASE_ADDR				    0x090
+#define MV64360_PCI_1_IO_SIZE					    0x098
+#define MV64360_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
+#define MV64360_PCI_1_MEMORY0_SIZE				    0x0a8
+#define MV64360_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
+#define MV64360_PCI_1_MEMORY1_SIZE				    0x0b8
+#define MV64360_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
+#define MV64360_PCI_1_MEMORY2_SIZE				    0x2a8
+#define MV64360_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
+#define MV64360_PCI_1_MEMORY3_SIZE				    0x2b8
+
+/* SRAM base address */
+#define MV64360_INTEGRATED_SRAM_BASE_ADDR			    0x268
+
+/* internal registers space base address */
+#define MV64360_INTERNAL_SPACE_BASE_ADDR			    0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+   windows above */
+#define MV64360_BASE_ADDR_ENABLE				    0x278
+
+/****************************************/
+/* PCI remap registers			*/
+/****************************************/
+      /* PCI 0 */
+#define MV64360_PCI_0_IO_ADDR_REMAP				    0x0f0
+#define MV64360_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
+#define MV64360_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
+#define MV64360_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
+#define MV64360_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
+#define MV64360_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
+#define MV64360_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
+#define MV64360_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
+#define MV64360_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
+      /* PCI 1 */
+#define MV64360_PCI_1_IO_ADDR_REMAP				    0x108
+#define MV64360_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
+#define MV64360_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
+#define MV64360_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
+#define MV64360_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
+#define MV64360_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
+#define MV64360_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
+#define MV64360_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
+#define MV64360_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
+
+#define MV64360_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
+#define MV64360_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
+#define MV64360_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
+#define MV64360_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
+#define MV64360_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
+#define MV64360_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
+#define MV64360_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
+#define MV64360_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
+
+/****************************************/
+/*	   CPU Control Registers	*/
+/****************************************/
+
+#define MV64360_CPU_CONFIG					    0x000
+#define MV64360_CPU_MODE					    0x120
+#define MV64360_CPU_MASTER_CONTROL				    0x160
+#define MV64360_CPU_CROSS_BAR_CONTROL_LOW			    0x150
+#define MV64360_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
+#define MV64360_CPU_CROSS_BAR_TIMEOUT				    0x168
+
+/****************************************/
+/* SMP RegisterS			*/
+/****************************************/
+
+#define MV64360_SMP_WHO_AM_I					    0x200
+#define MV64360_SMP_CPU0_DOORBELL				    0x214
+#define MV64360_SMP_CPU0_DOORBELL_CLEAR				    0x21C
+#define MV64360_SMP_CPU1_DOORBELL				    0x224
+#define MV64360_SMP_CPU1_DOORBELL_CLEAR				    0x22C
+#define MV64360_SMP_CPU0_DOORBELL_MASK				    0x234
+#define MV64360_SMP_CPU1_DOORBELL_MASK				    0x23C
+#define MV64360_SMP_SEMAPHOR0					    0x244
+#define MV64360_SMP_SEMAPHOR1					    0x24c
+#define MV64360_SMP_SEMAPHOR2					    0x254
+#define MV64360_SMP_SEMAPHOR3					    0x25c
+#define MV64360_SMP_SEMAPHOR4					    0x264
+#define MV64360_SMP_SEMAPHOR5					    0x26c
+#define MV64360_SMP_SEMAPHOR6					    0x274
+#define MV64360_SMP_SEMAPHOR7					    0x27c
+
+/****************************************/
+/*  CPU Sync Barrier Register		*/
+/****************************************/
+
+#define MV64360_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
+#define MV64360_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
+#define MV64360_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
+#define MV64360_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
+
+/****************************************/
+/* CPU Access Protect			*/
+/****************************************/
+
+#define MV64360_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
+#define MV64360_CPU_PROTECT_WINDOW_0_SIZE			    0x188
+#define MV64360_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
+#define MV64360_CPU_PROTECT_WINDOW_1_SIZE			    0x198
+#define MV64360_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
+#define MV64360_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
+#define MV64360_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
+#define MV64360_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
+
+
+/****************************************/
+/*	    CPU Error Report		*/
+/****************************************/
+
+#define MV64360_CPU_ERROR_ADDR_LOW				    0x070
+#define MV64360_CPU_ERROR_ADDR_HIGH				    0x078
+#define MV64360_CPU_ERROR_DATA_LOW				    0x128
+#define MV64360_CPU_ERROR_DATA_HIGH				    0x130
+#define MV64360_CPU_ERROR_PARITY				    0x138
+#define MV64360_CPU_ERROR_CAUSE					    0x140
+#define MV64360_CPU_ERROR_MASK					    0x148
+
+/****************************************/
+/*	CPU Interface Debug Registers	*/
+/****************************************/
+
+#define MV64360_PUNIT_SLAVE_DEBUG_LOW				    0x360
+#define MV64360_PUNIT_SLAVE_DEBUG_HIGH				    0x368
+#define MV64360_PUNIT_MASTER_DEBUG_LOW				    0x370
+#define MV64360_PUNIT_MASTER_DEBUG_HIGH				    0x378
+#define MV64360_PUNIT_MMASK					    0x3e4
+
+/****************************************/
+/*  Integrated SRAM Registers		*/
+/****************************************/
+
+#define MV64360_SRAM_CONFIG					    0x380
+#define MV64360_SRAM_TEST_MODE					    0X3F4
+#define MV64360_SRAM_ERROR_CAUSE				    0x388
+#define MV64360_SRAM_ERROR_ADDR					    0x390
+#define MV64360_SRAM_ERROR_ADDR_HIGH				    0X3F8
+#define MV64360_SRAM_ERROR_DATA_LOW				    0x398
+#define MV64360_SRAM_ERROR_DATA_HIGH				    0x3a0
+#define MV64360_SRAM_ERROR_DATA_PARITY				    0x3a8
+
+/****************************************/
+/* SDRAM Configuration			*/
+/****************************************/
+
+#define MV64360_SDRAM_CONFIG					    0x1400
+#define MV64360_D_UNIT_CONTROL_LOW				    0x1404
+#define MV64360_D_UNIT_CONTROL_HIGH				    0x1424
+#define MV64360_SDRAM_TIMING_CONTROL_LOW			    0x1408
+#define MV64360_SDRAM_TIMING_CONTROL_HIGH			    0x140c
+#define MV64360_SDRAM_ADDR_CONTROL				    0x1410
+#define MV64360_SDRAM_OPEN_PAGES_CONTROL			    0x1414
+#define MV64360_SDRAM_OPERATION					    0x1418
+#define MV64360_SDRAM_MODE					    0x141c
+#define MV64360_EXTENDED_DRAM_MODE				    0x1420
+#define MV64360_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
+#define MV64360_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
+#define MV64360_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
+#define MV64360_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
+#define MV64360_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
+
+/****************************************/
+/* SDRAM Error Report			*/
+/****************************************/
+
+#define MV64360_SDRAM_ERROR_DATA_LOW				    0x1444
+#define MV64360_SDRAM_ERROR_DATA_HIGH				    0x1440
+#define MV64360_SDRAM_ERROR_ADDR				    0x1450
+#define MV64360_SDRAM_RECEIVED_ECC				    0x1448
+#define MV64360_SDRAM_CALCULATED_ECC				    0x144c
+#define MV64360_SDRAM_ECC_CONTROL				    0x1454
+#define MV64360_SDRAM_ECC_ERROR_COUNTER				    0x1458
+
+/******************************************/
+/*  Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64360_DFCDL_CONFIG0					    0x1480
+#define MV64360_DFCDL_CONFIG1					    0x1484
+#define MV64360_DLL_WRITE					    0x1488
+#define MV64360_DLL_READ					    0x148c
+#define MV64360_SRAM_ADDR					    0x1490
+#define MV64360_SRAM_DATA0					    0x1494
+#define MV64360_SRAM_DATA1					    0x1498
+#define MV64360_SRAM_DATA2					    0x149c
+#define MV64360_DFCL_PROBE					    0x14a0
+
+/******************************************/
+/*   Debug Registers			  */
+/******************************************/
+
+#define MV64360_DUNIT_DEBUG_LOW					    0x1460
+#define MV64360_DUNIT_DEBUG_HIGH				    0x1464
+#define MV64360_DUNIT_MMASK					    0X1b40
+
+/****************************************/
+/* Device Parameters			*/
+/****************************************/
+
+#define MV64360_DEVICE_BANK0_PARAMETERS				    0x45c
+#define MV64360_DEVICE_BANK1_PARAMETERS				    0x460
+#define MV64360_DEVICE_BANK2_PARAMETERS				    0x464
+#define MV64360_DEVICE_BANK3_PARAMETERS				    0x468
+#define MV64360_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
+#define MV64360_DEVICE_INTERFACE_CONTROL			    0x4c0
+#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
+#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
+#define MV64360_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
+
+/****************************************/
+/* Device interrupt registers		*/
+/****************************************/
+
+#define MV64360_DEVICE_INTERRUPT_CAUSE				    0x4d0
+#define MV64360_DEVICE_INTERRUPT_MASK				    0x4d4
+#define MV64360_DEVICE_ERROR_ADDR				    0x4d8
+#define MV64360_DEVICE_ERROR_DATA				    0x4dc
+#define MV64360_DEVICE_ERROR_PARITY				    0x4e0
+
+/****************************************/
+/* Device debug registers		*/
+/****************************************/
+
+#define MV64360_DEVICE_DEBUG_LOW				    0x4e4
+#define MV64360_DEVICE_DEBUG_HIGH				    0x4e8
+#define MV64360_RUNIT_MMASK					    0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64360_PCI_0_CS_0_BANK_SIZE				    0xc08
+#define MV64360_PCI_1_CS_0_BANK_SIZE				    0xc88
+#define MV64360_PCI_0_CS_1_BANK_SIZE				    0xd08
+#define MV64360_PCI_1_CS_1_BANK_SIZE				    0xd88
+#define MV64360_PCI_0_CS_2_BANK_SIZE				    0xc0c
+#define MV64360_PCI_1_CS_2_BANK_SIZE				    0xc8c
+#define MV64360_PCI_0_CS_3_BANK_SIZE				    0xd0c
+#define MV64360_PCI_1_CS_3_BANK_SIZE				    0xd8c
+#define MV64360_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
+#define MV64360_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
+#define MV64360_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
+#define MV64360_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
+#define MV64360_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
+#define MV64360_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
+#define MV64360_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
+#define MV64360_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
+#define MV64360_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
+#define MV64360_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
+#define MV64360_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
+#define MV64360_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
+#define MV64360_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
+#define MV64360_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
+#define MV64360_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
+#define MV64360_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
+#define MV64360_PCI_0_CPU_BAR_SIZE				    0xd28
+#define MV64360_PCI_1_CPU_BAR_SIZE				    0xda8
+#define MV64360_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
+#define MV64360_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
+#define MV64360_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
+#define MV64360_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
+#define MV64360_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
+#define MV64360_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
+#define MV64360_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
+#define MV64360_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
+#define MV64360_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
+#define MV64360_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
+#define MV64360_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
+#define MV64360_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
+#define MV64360_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
+#define MV64360_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
+#define MV64360_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
+#define MV64360_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
+#define MV64360_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
+#define MV64360_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
+#define MV64360_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
+#define MV64360_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
+#define MV64360_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
+#define MV64360_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
+#define MV64360_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
+#define MV64360_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
+#define MV64360_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
+#define MV64360_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
+#define MV64360_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
+#define MV64360_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
+#define MV64360_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
+#define MV64360_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
+#define MV64360_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
+#define MV64360_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
+#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
+#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
+#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
+#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
+#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
+#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
+#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
+#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
+#define MV64360_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
+#define MV64360_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
+#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
+#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
+#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
+#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
+#define MV64360_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
+#define MV64360_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
+#define MV64360_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
+#define MV64360_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
+#define MV64360_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
+#define MV64360_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
+#define MV64360_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
+#define MV64360_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
+#define MV64360_PCI_0_HEADERS_RETARGET_BASE			    0xF44
+#define MV64360_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
+#define MV64360_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
+#define MV64360_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
+
+/***********************************/
+/*   PCI Control Register Map	   */
+/***********************************/
+
+#define MV64360_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
+#define MV64360_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
+#define MV64360_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
+#define MV64360_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
+#define MV64360_PCI_0_COMMAND					    0xc00
+#define MV64360_PCI_1_COMMAND					    0xc80
+#define MV64360_PCI_0_MODE					    0xd00
+#define MV64360_PCI_1_MODE					    0xd80
+#define MV64360_PCI_0_RETRY					    0xc04
+#define MV64360_PCI_1_RETRY					    0xc84
+#define MV64360_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
+#define MV64360_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
+#define MV64360_PCI_0_MSI_TRIGGER_TIMER				    0xc38
+#define MV64360_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
+#define MV64360_PCI_0_ARBITER_CONTROL				    0x1d00
+#define MV64360_PCI_1_ARBITER_CONTROL				    0x1d80
+#define MV64360_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
+#define MV64360_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
+#define MV64360_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
+#define MV64360_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
+#define MV64360_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
+#define MV64360_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
+#define MV64360_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
+#define MV64360_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
+#define MV64360_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
+#define MV64360_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
+#define MV64360_PCI_0_P2P_CONFIG				    0x1d14
+#define MV64360_PCI_1_P2P_CONFIG				    0x1d94
+
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
+
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
+
+/****************************************/
+/*   PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64360_PCI_0_CONFIG_ADDR				    0xcf8
+#define MV64360_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
+#define MV64360_PCI_1_CONFIG_ADDR				    0xc78
+#define MV64360_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
+#define MV64360_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
+#define MV64360_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
+
+/****************************************/
+/*   PCI Error Report Registers		*/
+/****************************************/
+
+#define MV64360_PCI_0_SERR_MASK					    0xc28
+#define MV64360_PCI_1_SERR_MASK					    0xca8
+#define MV64360_PCI_0_ERROR_ADDR_LOW				    0x1d40
+#define MV64360_PCI_1_ERROR_ADDR_LOW				    0x1dc0
+#define MV64360_PCI_0_ERROR_ADDR_HIGH				    0x1d44
+#define MV64360_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
+#define MV64360_PCI_0_ERROR_ATTRIBUTE				    0x1d48
+#define MV64360_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
+#define MV64360_PCI_0_ERROR_COMMAND				    0x1d50
+#define MV64360_PCI_1_ERROR_COMMAND				    0x1dd0
+#define MV64360_PCI_0_ERROR_CAUSE				    0x1d58
+#define MV64360_PCI_1_ERROR_CAUSE				    0x1dd8
+#define MV64360_PCI_0_ERROR_MASK				    0x1d5c
+#define MV64360_PCI_1_ERROR_MASK				    0x1ddc
+
+/****************************************/
+/*   PCI Debug Registers		*/
+/****************************************/
+
+#define MV64360_PCI_0_MMASK					    0X1D24
+#define MV64360_PCI_1_MMASK					    0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+#define MV64360_PCI_DEVICE_AND_VENDOR_ID			    0x000
+#define MV64360_PCI_STATUS_AND_COMMAND				    0x004
+#define MV64360_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
+#define MV64360_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
+
+#define MV64360_PCI_SCS_0_BASE_ADDR_LOW				    0x010
+#define MV64360_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
+#define MV64360_PCI_SCS_1_BASE_ADDR_LOW				    0x018
+#define MV64360_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
+#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
+#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
+#define MV64360_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
+#define MV64360_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
+#define MV64360_PCI_CAPABILTY_LIST_POINTER			    0x034
+#define MV64360_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
+       /* capability list */
+#define MV64360_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
+#define MV64360_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
+#define MV64360_PCI_VPD_ADDR					    0x048
+#define MV64360_PCI_VPD_DATA					    0x04c
+#define MV64360_PCI_MSI_MESSAGE_CONTROL				    0x050
+#define MV64360_PCI_MSI_MESSAGE_ADDR				    0x054
+#define MV64360_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
+#define MV64360_PCI_MSI_MESSAGE_DATA				    0x05c
+#define MV64360_PCI_X_COMMAND					    0x060
+#define MV64360_PCI_X_STATUS					    0x064
+#define MV64360_PCI_COMPACT_PCI_HOT_SWAP			    0x068
+
+/***********************************************/
+/*   PCI Configuration, Function 1, Registers  */
+/***********************************************/
+
+#define MV64360_PCI_SCS_2_BASE_ADDR_LOW				    0x110
+#define MV64360_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
+#define MV64360_PCI_SCS_3_BASE_ADDR_LOW				    0x118
+#define MV64360_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
+#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
+#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
+
+/***********************************************/
+/*  PCI Configuration, Function 2, Registers   */
+/***********************************************/
+
+#define MV64360_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
+#define MV64360_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
+#define MV64360_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
+#define MV64360_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
+#define MV64360_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
+#define MV64360_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 3, Registers   */
+/***********************************************/
+
+#define MV64360_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
+#define MV64360_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
+#define MV64360_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
+#define MV64360_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
+#define MV64360_PCI_CPU_BASE_ADDR_LOW				    0x220
+#define MV64360_PCI_CPU_BASE_ADDR_HIGH				    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 4, Registers   */
+/***********************************************/
+
+#define MV64360_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
+#define MV64360_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
+#define MV64360_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
+#define MV64360_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
+#define MV64360_PCI_P2P_I_O_BASE_ADDR				    0x420
+#define MV64360_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20)	*/
+/****************************************/
+
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
+#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
+
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
+#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
+
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
+#define MV64360_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
+#define MV64360_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
+
+/****************************************/
+/*	  Ethernet Unit Registers		*/
+/****************************************/
+
+#define MV64360_ETH_PHY_ADDR_REG				    0x2000
+#define MV64360_ETH_SMI_REG					    0x2004
+#define MV64360_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
+#define MV64360_ETH_UNIT_DEFAULTID_REG				    0x200c
+#define MV64360_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
+#define MV64360_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
+#define MV64360_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
+#define MV64360_ETH_UNIT_ERROR_ADDR_REG				    0x2094
+#define MV64360_ETH_BAR_0					    0x2200
+#define MV64360_ETH_BAR_1					    0x2208
+#define MV64360_ETH_BAR_2					    0x2210
+#define MV64360_ETH_BAR_3					    0x2218
+#define MV64360_ETH_BAR_4					    0x2220
+#define MV64360_ETH_BAR_5					    0x2228
+#define MV64360_ETH_SIZE_REG_0					    0x2204
+#define MV64360_ETH_SIZE_REG_1					    0x220c
+#define MV64360_ETH_SIZE_REG_2					    0x2214
+#define MV64360_ETH_SIZE_REG_3					    0x221c
+#define MV64360_ETH_SIZE_REG_4					    0x2224
+#define MV64360_ETH_SIZE_REG_5					    0x222c
+#define MV64360_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
+#define MV64360_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
+#define MV64360_ETH_BASE_ADDR_ENABLE_REG			    0x2290
+#define MV64360_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
+#define MV64360_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
+#define MV64360_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
+#define MV64360_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
+#define MV64360_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
+#define MV64360_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
+#define MV64360_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
+#define MV64360_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
+#define MV64360_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
+#define MV64360_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
+#define MV64360_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
+#define MV64360_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
+#define MV64360_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
+#define MV64360_ETH_DSCP_3(port)				   (0x242c + (port<<10))
+#define MV64360_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
+#define MV64360_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
+#define MV64360_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
+#define MV64360_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
+#define MV64360_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
+#define MV64360_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
+#define MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
+#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
+#define MV64360_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
+#define MV64360_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
+#define MV64360_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
+#define MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
+#define MV64360_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
+#define MV64360_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
+#define MV64360_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
+#define MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
+#define MV64360_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
+#define MV64360_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
+#define MV64360_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
+#define MV64360_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
+#define MV64360_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
+#define MV64360_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
+#define MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
+#define MV64360_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
+#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
+#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
+#define MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
+#define MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
+#define MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
+
+/*******************************************/
+/*	    CUNIT  Registers		   */
+/*******************************************/
+
+	 /* Address Decoding Register Map */
+
+#define MV64360_CUNIT_BASE_ADDR_REG0				    0xf200
+#define MV64360_CUNIT_BASE_ADDR_REG1				    0xf208
+#define MV64360_CUNIT_BASE_ADDR_REG2				    0xf210
+#define MV64360_CUNIT_BASE_ADDR_REG3				    0xf218
+#define MV64360_CUNIT_SIZE0					    0xf204
+#define MV64360_CUNIT_SIZE1					    0xf20c
+#define MV64360_CUNIT_SIZE2					    0xf214
+#define MV64360_CUNIT_SIZE3					    0xf21c
+#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
+#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
+#define MV64360_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
+#define MV64360_MPSC0_ACCESS_PROTECTION_REG			    0xf254
+#define MV64360_MPSC1_ACCESS_PROTECTION_REG			    0xf258
+#define MV64360_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
+
+	/*  Error Report Registers  */
+
+#define MV64360_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
+#define MV64360_CUNIT_INTERRUPT_MASK_REG			    0xf314
+#define MV64360_CUNIT_ERROR_ADDR				    0xf318
+
+	/*  Cunit Control Registers */
+
+#define MV64360_CUNIT_ARBITER_CONTROL_REG			    0xf300
+#define MV64360_CUNIT_CONFIG_REG				    0xb40c
+#define MV64360_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
+
+	/*  Cunit Debug Registers   */
+
+#define MV64360_CUNIT_DEBUG_LOW					    0xf340
+#define MV64360_CUNIT_DEBUG_HIGH				    0xf344
+#define MV64360_CUNIT_MMASK					    0xf380
+
+	/*  Cunit Base Address Enable Window Bits*/
+#define MV64360_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
+#define MV64360_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
+#define MV64360_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
+#define MV64360_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
+
+	/*  MPSCs Clocks Routing Registers  */
+
+#define MV64360_MPSC_ROUTING_REG				    0xb400
+#define MV64360_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
+#define MV64360_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
+
+	/*  MPSCs Interrupts Registers	  */
+
+#define MV64360_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
+#define MV64360_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
+
+#define MV64360_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
+#define MV64360_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
+#define MV64360_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
+
+	/*  MPSC0 Registers	 */
+
+
+/***************************************/
+/*	    SDMA Registers	       */
+/***************************************/
+
+#define MV64360_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
+#define MV64360_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
+#define MV64360_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
+#define MV64360_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
+#define MV64360_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
+
+#define MV64360_SDMA_CAUSE_REG					    0xb800
+#define MV64360_SDMA_MASK_REG					    0xb880
+
+
+/****************************************/
+/* SDMA Address Space Targets		*/
+/****************************************/
+
+#define MV64360_SDMA_DRAM_CS_0_TARGET				    0x0e00
+#define MV64360_SDMA_DRAM_CS_1_TARGET				    0x0d00
+#define MV64360_SDMA_DRAM_CS_2_TARGET				    0x0b00
+#define MV64360_SDMA_DRAM_CS_3_TARGET				    0x0700
+
+#define MV64360_SDMA_DEV_CS_0_TARGET				    0x1e01
+#define MV64360_SDMA_DEV_CS_1_TARGET				    0x1d01
+#define MV64360_SDMA_DEV_CS_2_TARGET				    0x1b01
+#define MV64360_SDMA_DEV_CS_3_TARGET				    0x1701
+
+#define MV64360_SDMA_BOOT_CS_TARGET				    0x0f00
+
+#define MV64360_SDMA_SRAM_TARGET				    0x0003
+#define MV64360_SDMA_60X_BUS_TARGET				    0x4003
+
+#define MV64360_PCI_0_TARGET					    0x0003
+#define MV64360_PCI_1_TARGET					    0x0004
+
+
+/* Devices BAR and size registers */
+
+#define MV64360_DEV_CS0_BASE_ADDR				    0x028
+#define MV64360_DEV_CS0_SIZE					    0x030
+#define MV64360_DEV_CS1_BASE_ADDR				    0x228
+#define MV64360_DEV_CS1_SIZE					    0x230
+#define MV64360_DEV_CS2_BASE_ADDR				    0x248
+#define MV64360_DEV_CS2_SIZE					    0x250
+#define MV64360_DEV_CS3_BASE_ADDR				    0x038
+#define MV64360_DEV_CS3_SIZE					    0x040
+#define MV64360_BOOTCS_BASE_ADDR				    0x238
+#define MV64360_BOOTCS_SIZE					    0x240
+
+/* SDMA Window access protection */
+#define MV64360_SDMA_WIN_ACCESS_NOT_ALLOWED 0
+#define MV64360_SDMA_WIN_ACCESS_READ_ONLY 1
+#define MV64360_SDMA_WIN_ACCESS_FULL 2
+
+/* BRG Interrupts */
+
+#define MV64360_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
+#define MV64360_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
+#define MV64360_BRG_CAUSE_REG					    0xb834
+#define MV64360_BRG_MASK_REG					    0xb8b4
+
+/****************************************/
+/* DMA Channel Control			*/
+/****************************************/
+
+#define MV64360_DMA_CHANNEL0_CONTROL				    0x840
+#define MV64360_DMA_CHANNEL0_CONTROL_HIGH			    0x880
+#define MV64360_DMA_CHANNEL1_CONTROL				    0x844
+#define MV64360_DMA_CHANNEL1_CONTROL_HIGH			    0x884
+#define MV64360_DMA_CHANNEL2_CONTROL				    0x848
+#define MV64360_DMA_CHANNEL2_CONTROL_HIGH			    0x888
+#define MV64360_DMA_CHANNEL3_CONTROL				    0x84C
+#define MV64360_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
+
+
+/****************************************/
+/*	     IDMA Registers		*/
+/****************************************/
+
+#define MV64360_DMA_CHANNEL0_BYTE_COUNT				    0x800
+#define MV64360_DMA_CHANNEL1_BYTE_COUNT				    0x804
+#define MV64360_DMA_CHANNEL2_BYTE_COUNT				    0x808
+#define MV64360_DMA_CHANNEL3_BYTE_COUNT				    0x80C
+#define MV64360_DMA_CHANNEL0_SOURCE_ADDR			    0x810
+#define MV64360_DMA_CHANNEL1_SOURCE_ADDR			    0x814
+#define MV64360_DMA_CHANNEL2_SOURCE_ADDR			    0x818
+#define MV64360_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
+#define MV64360_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
+#define MV64360_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
+#define MV64360_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
+#define MV64360_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
+#define MV64360_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
+#define MV64360_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
+#define MV64360_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
+#define MV64360_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
+#define MV64360_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
+#define MV64360_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
+#define MV64360_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
+#define MV64360_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
+
+ /*  IDMA Address Decoding Base Address Registers  */
+
+#define MV64360_DMA_BASE_ADDR_REG0				    0xa00
+#define MV64360_DMA_BASE_ADDR_REG1				    0xa08
+#define MV64360_DMA_BASE_ADDR_REG2				    0xa10
+#define MV64360_DMA_BASE_ADDR_REG3				    0xa18
+#define MV64360_DMA_BASE_ADDR_REG4				    0xa20
+#define MV64360_DMA_BASE_ADDR_REG5				    0xa28
+#define MV64360_DMA_BASE_ADDR_REG6				    0xa30
+#define MV64360_DMA_BASE_ADDR_REG7				    0xa38
+
+ /*  IDMA Address Decoding Size Address Register   */
+
+#define MV64360_DMA_SIZE_REG0					    0xa04
+#define MV64360_DMA_SIZE_REG1					    0xa0c
+#define MV64360_DMA_SIZE_REG2					    0xa14
+#define MV64360_DMA_SIZE_REG3					    0xa1c
+#define MV64360_DMA_SIZE_REG4					    0xa24
+#define MV64360_DMA_SIZE_REG5					    0xa2c
+#define MV64360_DMA_SIZE_REG6					    0xa34
+#define MV64360_DMA_SIZE_REG7					    0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access
+		  Protection Registers			  */
+
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
+#define MV64360_DMA_BASE_ADDR_ENABLE_REG			    0xa80
+#define MV64360_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
+#define MV64360_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
+#define MV64360_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
+#define MV64360_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
+#define MV64360_DMA_ARBITER_CONTROL				    0x860
+#define MV64360_DMA_CROSS_BAR_TIMEOUT				    0x8d0
+
+ /*  IDMA Headers Retarget Registers   */
+
+#define MV64360_DMA_HEADERS_RETARGET_CONTROL			    0xa84
+#define MV64360_DMA_HEADERS_RETARGET_BASE			    0xa88
+
+ /*  IDMA Interrupt Register  */
+
+#define MV64360_DMA_INTERRUPT_CAUSE_REG				    0x8c0
+#define MV64360_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
+#define MV64360_DMA_ERROR_ADDR					    0x8c8
+#define MV64360_DMA_ERROR_SELECT				    0x8cc
+
+ /*  IDMA Debug Register ( for internal use )	 */
+
+#define MV64360_DMA_DEBUG_LOW					    0x8e0
+#define MV64360_DMA_DEBUG_HIGH					    0x8e4
+#define MV64360_DMA_SPARE					    0xA8C
+
+/****************************************/
+/* Timer_Counter			*/
+/****************************************/
+
+#define MV64360_TIMER_COUNTER0					    0x850
+#define MV64360_TIMER_COUNTER1					    0x854
+#define MV64360_TIMER_COUNTER2					    0x858
+#define MV64360_TIMER_COUNTER3					    0x85C
+#define MV64360_TIMER_COUNTER_0_3_CONTROL			    0x864
+#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
+#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
+
+/****************************************/
+/*	   Watchdog registers		*/
+/****************************************/
+
+#define MV64360_WATCHDOG_CONFIG_REG				    0xb410
+#define MV64360_WATCHDOG_VALUE_REG				    0xb414
+
+/****************************************/
+/* I2C Registers			*/
+/****************************************/
+
+#define MV64360_I2C_SLAVE_ADDR					    0xc000
+#define MV64360_I2C_EXTENDED_SLAVE_ADDR				    0xc010
+#define MV64360_I2C_DATA					    0xc004
+#define MV64360_I2C_CONTROL					    0xc008
+#define MV64360_I2C_STATUS_BAUDE_RATE				    0xc00C
+#define MV64360_I2C_SOFT_RESET					    0xc01c
+
+/****************************************/
+/* GPP Interface Registers		*/
+/****************************************/
+
+#define MV64360_GPP_IO_CONTROL					    0xf100
+#define MV64360_GPP_LEVEL_CONTROL				    0xf110
+#define MV64360_GPP_VALUE					    0xf104
+#define MV64360_GPP_INTERRUPT_CAUSE				    0xf108
+#define MV64360_GPP_INTERRUPT_MASK0				    0xf10c
+#define MV64360_GPP_INTERRUPT_MASK1				    0xf114
+#define MV64360_GPP_VALUE_SET					    0xf118
+#define MV64360_GPP_VALUE_CLEAR					    0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers	*/
+/****************************************/
+
+/****************************************/
+/* Interrupts				*/
+/****************************************/
+
+#define MV64360_MAIN_INTERRUPT_CAUSE_LOW			    0x004
+#define MV64360_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
+#define MV64360_CPU_INTERRUPT0_MASK_LOW				    0x014
+#define MV64360_CPU_INTERRUPT0_MASK_HIGH			    0x01c
+#define MV64360_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
+#define MV64360_CPU_INTERRUPT1_MASK_LOW				    0x034
+#define MV64360_CPU_INTERRUPT1_MASK_HIGH			    0x03c
+#define MV64360_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
+#define MV64360_INTERRUPT0_MASK_0_LOW				    0x054
+#define MV64360_INTERRUPT0_MASK_0_HIGH				    0x05c
+#define MV64360_INTERRUPT0_SELECT_CAUSE				    0x064
+#define MV64360_INTERRUPT1_MASK_0_LOW				    0x074
+#define MV64360_INTERRUPT1_MASK_0_HIGH				    0x07c
+#define MV64360_INTERRUPT1_SELECT_CAUSE				    0x084
+
+/****************************************/
+/*	MPP Interface Registers		*/
+/****************************************/
+
+#define MV64360_MPP_CONTROL0					    0xf000
+#define MV64360_MPP_CONTROL1					    0xf004
+#define MV64360_MPP_CONTROL2					    0xf008
+#define MV64360_MPP_CONTROL3					    0xf00c
+
+/****************************************/
+/*    Serial Initialization registers	*/
+/****************************************/
+
+#define MV64360_SERIAL_INIT_LAST_DATA				    0xf324
+#define MV64360_SERIAL_INIT_CONTROL				    0xf328
+#define MV64360_SERIAL_INIT_STATUS				    0xf32c
+
+
+#endif /* __INCgt64360rh */
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
new file mode 100644
index 0000000000..5637284124
--- /dev/null
+++ b/board/Marvell/db64360/pci.c
@@ -0,0 +1,940 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* PCI.c - PCI functions */
+
+
+#include <common.h>
+#include <pci.h>
+
+#include "../include/pci.h"
+
+#undef DEBUG
+#undef IDE_SET_NATIVE_MODE
+static unsigned int local_buses[] = { 0, 0 };
+
+static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
+	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+};
+
+
+#ifdef DEBUG
+static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
+static void gt_pci_bus_mode_display (PCI_HOST host)
+{
+	unsigned int mode;
+
+
+	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
+	switch (mode) {
+	case 0:
+		printf ("PCI %d bus mode: Conventional PCI\n", host);
+		break;
+	case 1:
+		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		break;
+	case 2:
+		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		break;
+	case 3:
+		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		break;
+	default:
+		printf ("Unknown BUS %d\n", mode);
+	}
+}
+#endif
+
+static const unsigned int pci_p2p_configuration_reg[] = {
+	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+static const unsigned int pci_configuration_address[] = {
+	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
+};
+
+static const unsigned int pci_configuration_data[] = {
+	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
+	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
+};
+
+static const unsigned int pci_error_cause_reg[] = {
+	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
+};
+
+static const unsigned int pci_arbiter_control[] = {
+	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
+};
+
+static const unsigned int pci_address_space_en[] = {
+	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
+};
+
+static const unsigned int pci_snoop_control_base_0_low[] = {
+	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_snoop_control_top_0[] = {
+	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
+};
+
+static const unsigned int pci_access_control_base_0_low[] = {
+	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_access_control_top_0[] = {
+	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
+};
+
+static const unsigned int pci_scs_bank_size[2][4] = {
+	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
+	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
+	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
+	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
+};
+
+static const unsigned int pci_p2p_configuration[] = {
+	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+
+/********************************************************************
+* pciWriteConfigReg - Write to a PCI configuration register
+*                    - Make sure the GT is configured as a master before writing
+*                      to another device on the PCI.
+*                    - The function takes care of Big/Little endian conversion.
+*
+*
+* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
+*                   (or any other PCI device spec)
+*           pciDevNum: The device number needs to be addressed.
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|00|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*********************************************************************/
+void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
+			unsigned int pciDevNum, unsigned int data)
+{
+	volatile unsigned int DataForAddrReg;
+	unsigned int functionNum;
+	unsigned int busNum = 0;
+	unsigned int addr;
+
+	if (pciDevNum > 32)	/* illegal device Number */
+		return;
+	if (pciDevNum == SELF) {	/* configure our configuration space. */
+		pciDevNum =
+			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+			0x1f;
+		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+			0xff0000;
+	}
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xfc;
+	DataForAddrReg =
+		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
+	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+	GT_REG_READ (pci_configuration_address[host], &addr);
+	if (addr != DataForAddrReg)
+		return;
+	GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+/********************************************************************
+* pciReadConfigReg  - Read from a PCI0 configuration register
+*                    - Make sure the GT is configured as a master before reading
+*                     from another device on the PCI.
+*                   - The function takes care of Big/Little endian conversion.
+* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
+*                        spec)
+*           pciDevNum: The device number needs to be addressed.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+*                 cause register to make sure the data is valid
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|00|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*********************************************************************/
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+			       unsigned int pciDevNum)
+{
+	volatile unsigned int DataForAddrReg;
+	unsigned int data;
+	unsigned int functionNum;
+	unsigned int busNum = 0;
+
+	if (pciDevNum > 32)	/* illegal device Number */
+		return 0xffffffff;
+	if (pciDevNum == SELF) {	/* configure our configuration space. */
+		pciDevNum =
+			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+			0x1f;
+		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+			0xff0000;
+	}
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xfc;
+	DataForAddrReg =
+		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
+	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+	GT_REG_READ (pci_configuration_address[host], &data);
+	if (data != DataForAddrReg)
+		return 0xffffffff;
+	GT_REG_READ (pci_configuration_data[host], &data);
+	return data;
+}
+
+/********************************************************************
+* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
+*                               the agent is placed on another Bus. For more
+*                               information read P2P in the PCI spec.
+*
+* Inputs:   unsigned int regOffset - The register offset as it apears in the
+*           GT spec (or any other PCI device spec).
+*           unsigned int pciDevNum - The device number needs to be addressed.
+*           unsigned int busNum - On which bus does the Target agent connect
+*                                 to.
+*           unsigned int data - data to be written.
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|01|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
+*   PCI spec referring to P2P.
+*
+*********************************************************************/
+void pciOverBridgeWriteConfigReg (PCI_HOST host,
+				  unsigned int regOffset,
+				  unsigned int pciDevNum,
+				  unsigned int busNum, unsigned int data)
+{
+	unsigned int DataForReg;
+	unsigned int functionNum;
+
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xff;
+	busNum = busNum << 16;
+	if (pciDevNum == SELF) {	/* This board */
+		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
+	} else {
+		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+			BIT31 | BIT0;
+	}
+	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+	GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+
+/********************************************************************
+* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
+*                               the agent target locate on another PCI bus.
+*                             - Make sure the GT is configured as a master
+*                               before reading from another device on the PCI.
+*                             - The function takes care of Big/Little endian
+*                               conversion.
+* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
+*                        spec). (configuration register offset.)
+*           pciDevNum: The device number needs to be addressed.
+*           busNum: the Bus number where the agent is place.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+*                 cause register to make sure the data is valid
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|01|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*********************************************************************/
+unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
+					 unsigned int regOffset,
+					 unsigned int pciDevNum,
+					 unsigned int busNum)
+{
+	unsigned int DataForReg;
+	unsigned int data;
+	unsigned int functionNum;
+
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xff;
+	busNum = busNum << 16;
+	if (pciDevNum == SELF) {	/* This board */
+		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
+	} else {		/* agent on another bus */
+
+		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+			BIT0 | BIT31;
+	}
+	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+	GT_REG_READ (pci_configuration_data[host], &data);
+	return data;
+}
+
+
+/********************************************************************
+* pciGetRegOffset - Gets the register offset for this region config.
+*
+* INPUT:   Bus, Region - The bus and region we ask for its base address.
+* OUTPUT:   N/A
+* RETURNS: PCI register base address
+*********************************************************************/
+static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
+{
+	switch (host) {
+	case PCI_HOST0:
+		switch (region) {
+		case PCI_IO:
+			return PCI_0I_O_LOW_DECODE_ADDRESS;
+		case PCI_REGION0:
+			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+		case PCI_REGION1:
+			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
+		case PCI_REGION2:
+			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
+		case PCI_REGION3:
+			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
+		}
+	case PCI_HOST1:
+		switch (region) {
+		case PCI_IO:
+			return PCI_1I_O_LOW_DECODE_ADDRESS;
+		case PCI_REGION0:
+			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
+		case PCI_REGION1:
+			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
+		case PCI_REGION2:
+			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
+		case PCI_REGION3:
+			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
+		}
+	}
+	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+}
+
+static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
+{
+	switch (host) {
+	case PCI_HOST0:
+		switch (region) {
+		case PCI_IO:
+			return PCI_0I_O_ADDRESS_REMAP;
+		case PCI_REGION0:
+			return PCI_0MEMORY0_ADDRESS_REMAP;
+		case PCI_REGION1:
+			return PCI_0MEMORY1_ADDRESS_REMAP;
+		case PCI_REGION2:
+			return PCI_0MEMORY2_ADDRESS_REMAP;
+		case PCI_REGION3:
+			return PCI_0MEMORY3_ADDRESS_REMAP;
+		}
+	case PCI_HOST1:
+		switch (region) {
+		case PCI_IO:
+			return PCI_1I_O_ADDRESS_REMAP;
+		case PCI_REGION0:
+			return PCI_1MEMORY0_ADDRESS_REMAP;
+		case PCI_REGION1:
+			return PCI_1MEMORY1_ADDRESS_REMAP;
+		case PCI_REGION2:
+			return PCI_1MEMORY2_ADDRESS_REMAP;
+		case PCI_REGION3:
+			return PCI_1MEMORY3_ADDRESS_REMAP;
+		}
+	}
+	return PCI_0MEMORY0_ADDRESS_REMAP;
+}
+
+/********************************************************************
+* pciGetBaseAddress - Gets the base address of a PCI.
+*           - If the PCI size is 0 then this base address has no meaning!!!
+*
+*
+* INPUT:   Bus, Region - The bus and region we ask for its base address.
+* OUTPUT:   N/A
+* RETURNS: PCI base address.
+*********************************************************************/
+unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
+{
+	unsigned int regBase;
+	unsigned int regEnd;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+
+	GT_REG_READ (regOffset, &regBase);
+	GT_REG_READ (regOffset + 8, &regEnd);
+
+	if (regEnd <= regBase)
+		return 0xffffffff;	/* ERROR !!! */
+
+	regBase = regBase << 16;
+	return regBase;
+}
+
+bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
+		  unsigned int bankBase, unsigned int bankLength)
+{
+	unsigned int low = 0xfff;
+	unsigned int high = 0x0;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+	unsigned int remapOffset = pciGetRemapOffset (host, region);
+
+	if (bankLength != 0) {
+		low = (bankBase >> 16) & 0xffff;
+		high = ((bankBase + bankLength) >> 16) - 1;
+	}
+
+	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
+	GT_REG_WRITE (regOffset + 8, high);
+
+	if (bankLength != 0) {	/* must do AFTER writing maps */
+		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
+								   dont support upper 32
+								   in this driver */
+	}
+	return true;
+}
+
+unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
+{
+	unsigned int low;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+
+	GT_REG_READ (regOffset, &low);
+	return (low & 0xffff) << 16;
+}
+
+unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
+{
+	unsigned int low, high;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+
+	GT_REG_READ (regOffset, &low);
+	GT_REG_READ (regOffset + 8, &high);
+	return ((high & 0xffff) + 1) << 16;
+}
+
+
+/* ronen - 7/Dec/03*/
+/********************************************************************
+* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
+* Inputs: one of the PCI BAR
+*********************************************************************/
+void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+/********************************************************************
+* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
+*
+* Inputs: base and size of PCI SCS
+*********************************************************************/
+void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
+		       unsigned int pciDramBase, unsigned int pciDramSize)
+{
+	/*ronen different function for 3rd bank. */
+	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
+
+	pciDramBase = pciDramBase & 0xfffff000;
+	pciDramBase = pciDramBase | (pciReadConfigReg (host,
+						       PCI_SCS_0_BASE_ADDRESS
+						       + offset,
+						       SELF) & 0x00000fff);
+	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
+			   pciDramBase);
+	if (pciDramSize == 0)
+		pciDramSize++;
+	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
+	gtPciEnableInternalBAR (host, bank);
+}
+
+/********************************************************************
+* pciSetRegionFeatures - This function modifys one of the 8 regions with
+*                         feature bits given as an input.
+*                       - Be advised to check the spec before modifying them.
+* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
+*         unsigned int features - See file: pci.h there are defintion for those
+*                                 region features.
+*         unsigned int baseAddress - The region base Address.
+*         unsigned int topAddress - The region top Address.
+* Returns: false if one of the parameters is erroneous true otherwise.
+*********************************************************************/
+bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
+			   unsigned int features, unsigned int baseAddress,
+			   unsigned int regionLength)
+{
+	unsigned int accessLow;
+	unsigned int accessHigh;
+	unsigned int accessTop = baseAddress + regionLength;
+
+	if (regionLength == 0) {	/* close the region. */
+		pciDisableAccessRegion (host, region);
+		return true;
+	}
+	/* base Address is store is bits [11:0] */
+	accessLow = (baseAddress & 0xfff00000) >> 20;
+	/* All the features are update according to the defines in pci.h (to be on
+	   the safe side we disable bits: [11:0] */
+	accessLow = accessLow | (features & 0xfffff000);
+	/* write to the Low Access Region register */
+	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+		      accessLow);
+
+	accessHigh = (accessTop & 0xfff00000) >> 20;
+
+	/* write to the High Access Region register */
+	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
+		      accessHigh - 1);
+	return true;
+}
+
+/********************************************************************
+* pciDisableAccessRegion - Disable The given Region by writing MAX size
+*                           to its low Address and MIN size to its high Address.
+*
+* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
+* Returns:  N/A.
+*********************************************************************/
+void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
+{
+	/* writing back the registers default values. */
+	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+		      0x01001fff);
+	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
+}
+
+/********************************************************************
+* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
+*
+* Inputs:   N/A
+* Returns:  true.
+*********************************************************************/
+bool pciArbiterEnable (PCI_HOST host)
+{
+	unsigned int regData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
+	return true;
+}
+
+/********************************************************************
+* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
+*
+* Inputs:   N/A
+* Returns:  true
+*********************************************************************/
+bool pciArbiterDisable (PCI_HOST host)
+{
+	unsigned int regData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
+	return true;
+}
+
+/********************************************************************
+* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
+*
+* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
+*           PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
+*           PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
+*           PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
+*           PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
+*           PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
+*           PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
+* Returns:  true
+*********************************************************************/
+bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
+				  PCI_AGENT_PRIO externalAgent0,
+				  PCI_AGENT_PRIO externalAgent1,
+				  PCI_AGENT_PRIO externalAgent2,
+				  PCI_AGENT_PRIO externalAgent3,
+				  PCI_AGENT_PRIO externalAgent4,
+				  PCI_AGENT_PRIO externalAgent5)
+{
+	unsigned int regData;
+	unsigned int writeData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
+		(externalAgent1 << 9) + (externalAgent2 << 10) +
+		(externalAgent3 << 11) + (externalAgent4 << 12) +
+		(externalAgent5 << 13);
+	regData = (regData & 0xffffc07f) | writeData;
+	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
+	return true;
+}
+
+/********************************************************************
+* pciParkingDisable - Park on last option disable, with this function you can
+*                      disable the park on last mechanism for each agent.
+*                      disabling this option for all agents results parking
+*                      on the internal master.
+*
+* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
+*         PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
+*         PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
+*         PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
+*         PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
+*         PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
+*         PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
+* Returns:  true
+*********************************************************************/
+bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
+			PCI_AGENT_PARK externalAgent0,
+			PCI_AGENT_PARK externalAgent1,
+			PCI_AGENT_PARK externalAgent2,
+			PCI_AGENT_PARK externalAgent3,
+			PCI_AGENT_PARK externalAgent4,
+			PCI_AGENT_PARK externalAgent5)
+{
+	unsigned int regData;
+	unsigned int writeData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
+		(externalAgent1 << 16) + (externalAgent2 << 17) +
+		(externalAgent3 << 18) + (externalAgent4 << 19) +
+		(externalAgent5 << 20);
+	regData = (regData & ~(0x7f << 14)) | writeData;
+	GT_REG_WRITE (pci_arbiter_control[host], regData);
+	return true;
+}
+
+/********************************************************************
+* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
+*                       respond to grant assertion within a window specified in
+*                       the input value: 'brokenValue'.
+*
+* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
+*                       grant without asserting frame.
+* Returns:  Error for illegal broken value otherwise true.
+*********************************************************************/
+bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
+{
+	unsigned int data;
+	unsigned int regData;
+
+	if (brokenValue > 0xf)
+		return false;	/* brokenValue must be 4 bit */
+	data = brokenValue << 3;
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	regData = (regData & 0xffffff87) | data;
+	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
+	return true;
+}
+
+/********************************************************************
+* pciDisableBrokenAgentDetection - This function disable the Broken agent
+*                           Detection mechanism.
+*                           NOTE: This operation may cause a dead lock on the
+*                           pci0 arbitration.
+*
+* Inputs:   N/A
+* Returns:  true.
+*********************************************************************/
+bool pciDisableBrokenAgentDetection (PCI_HOST host)
+{
+	unsigned int regData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	regData = regData & 0xfffffffd;
+	GT_REG_WRITE (pci_arbiter_control[host], regData);
+	return true;
+}
+
+/********************************************************************
+* pciP2PConfig - This function set the PCI_n P2P configurate.
+*                 For more information on the P2P read PCI spec.
+*
+* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
+*                                      Boundry.
+*          unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
+*                                      Boundry.
+*          unsigned int busNum - The CPI bus number to which the PCI interface
+*                                      is connected.
+*          unsigned int devNum - The PCI interface's device number.
+*
+* Returns:  true.
+*********************************************************************/
+bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
+		   unsigned int SecondBusHigh,
+		   unsigned int busNum, unsigned int devNum)
+{
+	unsigned int regData;
+
+	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
+		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
+	GT_REG_WRITE (pci_p2p_configuration[host], regData);
+	return true;
+}
+
+/********************************************************************
+* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
+*                          supports Cache Coherency in the PCI_n interface.
+* Inputs: region - One of the four regions.
+*         snoopType - There is four optional Types:
+*                        1. No Snoop.
+*                        2. Snoop to WT region.
+*                        3. Snoop to WB region.
+*                        4. Snoop & Invalidate to WB region.
+*         baseAddress - Base Address of this region.
+*         regionLength - Region length.
+* Returns: false if one of the parameters is wrong otherwise return true.
+*********************************************************************/
+bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
+			    PCI_SNOOP_TYPE snoopType,
+			    unsigned int baseAddress,
+			    unsigned int regionLength)
+{
+	unsigned int snoopXbaseAddress;
+	unsigned int snoopXtopAddress;
+	unsigned int data;
+	unsigned int snoopHigh = baseAddress + regionLength;
+
+	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
+		return false;
+	snoopXbaseAddress =
+		pci_snoop_control_base_0_low[host] + 0x10 * region;
+	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
+	if (regionLength == 0) {	/* closing the region */
+		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
+		GT_REG_WRITE (snoopXtopAddress, 0);
+		return true;
+	}
+	baseAddress = baseAddress & 0xfff00000;	/* Granularity of 1MByte */
+	data = (baseAddress >> 20) | snoopType << 12;
+	GT_REG_WRITE (snoopXbaseAddress, data);
+	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
+	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
+	return true;
+}
+
+static int gt_read_config_dword (struct pci_controller *hose,
+				 pci_dev_t dev, int offset, u32 * value)
+{
+	int bus = PCI_BUS (dev);
+
+	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+					   PCI_DEV (dev));
+	} else {
+		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
+						     cfg_addr, offset,
+						     PCI_DEV (dev), bus);
+	}
+
+	return 0;
+}
+
+static int gt_write_config_dword (struct pci_controller *hose,
+				  pci_dev_t dev, int offset, u32 value)
+{
+	int bus = PCI_BUS (dev);
+
+	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+				   PCI_DEV (dev), value);
+	} else {
+		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+					     offset, PCI_DEV (dev), bus,
+					     value);
+	}
+	return 0;
+}
+
+
+static void gt_setup_ide (struct pci_controller *hose,
+			  pci_dev_t dev, struct pci_config_table *entry)
+{
+	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
+	u32 bar_response, bar_value;
+	int bar;
+
+	for (bar = 0; bar < 6; bar++) {
+		/*ronen different function for 3rd bank. */
+		unsigned int offset =
+			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
+
+		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
+					0x0);
+		pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
+				       &bar_response);
+
+		pciauto_region_allocate (bar_response &
+					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
+					 pci_io : hose->pci_mem, ide_bar[bar],
+					 &bar_value);
+
+		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
+					bar_value);
+	}
+}
+
+
+/* TODO BJW: Change this for DB64360. This was pulled from the EV64260  */
+/* and is curently not called *. */
+#if 0
+static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char pin, irq;
+
+	pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
+
+	if (pin == 1) {		/* only allow INT A */
+		irq = pci_irq_swizzle[(PCI_HOST) hose->
+				      cfg_addr][PCI_DEV (dev)];
+		if (irq)
+			pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
+	}
+}
+#endif
+
+struct pci_config_table gt_config_table[] = {
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
+
+	{}
+};
+
+struct pci_controller pci0_hose = {
+/*    fixup_irq: gt_fixup_irq, */
+	config_table:gt_config_table,
+};
+
+struct pci_controller pci1_hose = {
+/*    fixup_irq: gt_fixup_irq, */
+	config_table:gt_config_table,
+};
+
+void pci_init_board (void)
+{
+	unsigned int command;
+
+#ifdef DEBUG
+	gt_pci_bus_mode_display (PCI_HOST0);
+#endif
+
+	pci0_hose.first_busno = 0;
+	pci0_hose.last_busno = 0xff;
+	local_buses[0] = pci0_hose.first_busno;
+
+	/* PCI memory space */
+	pci_set_region (pci0_hose.regions + 0,
+			CFG_PCI0_0_MEM_SPACE,
+			CFG_PCI0_0_MEM_SPACE,
+			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (pci0_hose.regions + 1,
+			CFG_PCI0_IO_SPACE_PCI,
+			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+
+	pci_set_ops (&pci0_hose,
+		     pci_hose_read_config_byte_via_dword,
+		     pci_hose_read_config_word_via_dword,
+		     gt_read_config_dword,
+		     pci_hose_write_config_byte_via_dword,
+		     pci_hose_write_config_word_via_dword,
+		     gt_write_config_dword);
+	pci0_hose.region_count = 2;
+
+	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
+
+	pci_register_hose (&pci0_hose);
+	pciArbiterEnable (PCI_HOST0);
+	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MASTER;
+	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MEMORY;
+	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+
+	pci0_hose.last_busno = pci_hose_scan (&pci0_hose);
+
+#ifdef DEBUG
+	gt_pci_bus_mode_display (PCI_HOST1);
+#endif
+	pci1_hose.first_busno = pci0_hose.last_busno + 1;
+	pci1_hose.last_busno = 0xff;
+	pci1_hose.current_busno = pci1_hose.first_busno;
+	local_buses[1] = pci1_hose.first_busno;
+
+	/* PCI memory space */
+	pci_set_region (pci1_hose.regions + 0,
+			CFG_PCI1_0_MEM_SPACE,
+			CFG_PCI1_0_MEM_SPACE,
+			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (pci1_hose.regions + 1,
+			CFG_PCI1_IO_SPACE_PCI,
+			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+	pci_set_ops (&pci1_hose,
+		     pci_hose_read_config_byte_via_dword,
+		     pci_hose_read_config_word_via_dword,
+		     gt_read_config_dword,
+		     pci_hose_write_config_byte_via_dword,
+		     pci_hose_write_config_word_via_dword,
+		     gt_write_config_dword);
+
+	pci1_hose.region_count = 2;
+
+	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
+
+	pci_register_hose (&pci1_hose);
+
+	pciArbiterEnable (PCI_HOST1);
+	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
+
+	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MASTER;
+	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+	pci1_hose.last_busno = pci_hose_scan (&pci1_hose);
+
+	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MEMORY;
+	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+}
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
new file mode 100644
index 0000000000..d2635f88eb
--- /dev/null
+++ b/board/Marvell/db64360/sdram_init.c
@@ -0,0 +1,1984 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * adaption for the Marvell DB64360 Board
+ * Ingo Assmus (ingo.assmus@keymile.com)
+ ************************************************************************/
+
+
+/* sdram_init.c - automatic memory sizing */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../include/memory.h"
+#include "../include/pci.h"
+#include "../include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "../common/i2c.h"
+#include "64360.h"
+#include "mv_regs.h"
+
+#undef	DEBUG
+#define MAP_PCI
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+int set_dfcdlInit (void);	/* setup delay line of Mv64360 */
+int mvDmaIsChannelActive (int);
+int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
+int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
+
+/* ------------------------------------------------------------------------- */
+
+int
+memory_map_bank (unsigned int bankNo,
+		 unsigned int bankBase, unsigned int bankLength)
+{
+#ifdef MAP_PCI
+	PCI_HOST host;
+#endif
+
+
+#ifdef DEBUG
+	if (bankLength > 0) {
+		printf ("mapping bank %d at %08x - %08x\n",
+			bankNo, bankBase, bankBase + bankLength - 1);
+	} else {
+		printf ("unmapping bank %d\n", bankNo);
+	}
+#endif
+
+	memoryMapBank (bankNo, bankBase, bankLength);
+
+#ifdef MAP_PCI
+	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
+		const int features =
+			PREFETCH_ENABLE |
+			DELAYED_READ_ENABLE |
+			AGGRESSIVE_PREFETCH |
+			READ_LINE_AGGRESSIVE_PREFETCH |
+			READ_MULTI_AGGRESSIVE_PREFETCH |
+			MAX_BURST_4 | PCI_NO_SWAP;
+
+		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
+
+		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
+				       bankLength);
+
+		pciSetRegionFeatures (host, bankNo, features, bankBase,
+				      bankLength);
+	}
+#endif
+	return 0;
+}
+
+#define GB	   (1 << 30)
+
+/* much of this code is based on (or is) the code in the pip405 port */
+/* thanks go to the authors of said port - Josh */
+
+/* structure to store the relevant information about an sdram bank */
+typedef struct sdram_info {
+	uchar drb_size;
+	uchar registered, ecc;
+	uchar tpar;
+	uchar tras_clocks;
+	uchar burst_len;
+	uchar banks, slot;
+} sdram_info_t;
+
+/* Typedefs for 'gtAuxilGetDIMMinfo' function */
+
+typedef enum _memoryType { SDRAM, DDR } MEMORY_TYPE;
+
+typedef enum _voltageInterface { TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
+	SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
+} VOLTAGE_INTERFACE;
+
+typedef enum _max_CL_supported_DDR { DDR_CL_1 = 1, DDR_CL_1_5 = 2, DDR_CL_2 =
+		4, DDR_CL_2_5 = 8, DDR_CL_3 = 16, DDR_CL_3_5 =
+		32, DDR_CL_FAULT } MAX_CL_SUPPORTED_DDR;
+typedef enum _max_CL_supported_SD { SD_CL_1 =
+		1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7,
+		SD_FAULT } MAX_CL_SUPPORTED_SD;
+
+
+/* SDRAM/DDR information struct */
+typedef struct _gtMemoryDimmInfo {
+	MEMORY_TYPE memoryType;
+	unsigned int numOfRowAddresses;
+	unsigned int numOfColAddresses;
+	unsigned int numOfModuleBanks;
+	unsigned int dataWidth;
+	VOLTAGE_INTERFACE voltageInterface;
+	unsigned int errorCheckType;	/* ECC , PARITY.. */
+	unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
+	unsigned int errorCheckDataWidth;	/* 0 - no, 1 - Yes */
+	unsigned int minClkDelay;
+	unsigned int burstLengthSupported;
+	unsigned int numOfBanksOnEachDevice;
+	unsigned int suportedCasLatencies;
+	unsigned int RefreshInterval;
+	unsigned int maxCASlatencySupported_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int maxCASlatencySupported_RoP;	/* RoP right of point (measured in ns) */
+	MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
+	MAX_CL_SUPPORTED_SD maxClSupported_SD;
+	unsigned int moduleBankDensity;
+	/* module attributes (true for yes) */
+	bool bufferedAddrAndControlInputs;
+	bool registeredAddrAndControlInputs;
+	bool onCardPLL;
+	bool bufferedDQMBinputs;
+	bool registeredDQMBinputs;
+	bool differentialClockInput;
+	bool redundantRowAddressing;
+
+	/* module general attributes */
+	bool suportedAutoPreCharge;
+	bool suportedPreChargeAll;
+	bool suportedEarlyRasPreCharge;
+	bool suportedWrite1ReadBurst;
+	bool suported5PercentLowVCC;
+	bool suported5PercentUpperVCC;
+	/* module timing parameters */
+	unsigned int minRasToCasDelay;
+	unsigned int minRowActiveRowActiveDelay;
+	unsigned int minRasPulseWidth;
+	unsigned int minRowPrechargeTime;	/* measured in ns */
+
+	int addrAndCommandHoldTime;	/* LoP left of point (measured in ns) */
+	int addrAndCommandSetupTime;	/* (measured in ns/100) */
+	int dataInputSetupTime; /* LoP left of point (measured in ns) */
+	int dataInputHoldTime;	/* LoP left of point (measured in ns) */
+/* tAC times for highest 2nd and 3rd highest CAS Latency values */
+	unsigned int clockToDataOut_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int clockToDataOut_RoP;	/* RoP right of point (measured in ns) */
+	unsigned int clockToDataOutMinus1_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int clockToDataOutMinus1_RoP;	/* RoP right of point (measured in ns) */
+	unsigned int clockToDataOutMinus2_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int clockToDataOutMinus2_RoP;	/* RoP right of point (measured in ns) */
+
+	unsigned int minimumCycleTimeAtMaxCasLatancy_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int minimumCycleTimeAtMaxCasLatancy_RoP;	/* RoP right of point (measured in ns) */
+
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */
+
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */
+
+	/* Parameters calculated from
+	   the extracted DIMM information */
+	unsigned int size;
+	unsigned int deviceDensity;	/* 16,64,128,256 or 512 Mbit */
+	unsigned int numberOfDevices;
+	uchar drb_size;		/* DRAM size in n*64Mbit */
+	uchar slot;		/* Slot Number this module is inserted in */
+	uchar spd_raw_data[128];	/* Content of SPD-EEPROM copied 1:1 */
+#ifdef DEBUG
+	uchar manufactura[8];	/* Content of SPD-EEPROM Byte 64-71 */
+	uchar modul_id[18];	/* Content of SPD-EEPROM Byte 73-90 */
+	uchar vendor_data[27];	/* Content of SPD-EEPROM Byte 99-125 */
+	unsigned long modul_serial_no;	/* Content of SPD-EEPROM Byte 95-98 */
+	unsigned int manufac_date;	/* Content of SPD-EEPROM Byte 93-94 */
+	unsigned int modul_revision;	/* Content of SPD-EEPROM Byte 91-92 */
+	uchar manufac_place;	/* Content of SPD-EEPROM Byte 72 */
+
+#endif
+} AUX_MEM_DIMM_INFO;
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into 10 ps unit values
+ */
+static inline unsigned short NS10to10PS (unsigned char spd_byte)
+{
+	unsigned short ns, ns10;
+
+	/* isolate upper nibble */
+	ns = (spd_byte >> 4) & 0x0F;
+	/* isolate lower nibble */
+	ns10 = (spd_byte & 0x0F);
+
+	return (ns * 100 + ns10 * 10);
+}
+
+/*
+ * translate ns coding of SPD timing values
+ * into 10 ps unit values
+ */
+static inline unsigned short NSto10PS (unsigned char spd_byte)
+{
+	return (spd_byte * 100);
+}
+
+/* This code reads the SPD chip on the sdram and populates
+ * the array which is passed in with the relevant information */
+/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
+static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned long spd_checksum;
+
+#ifdef ZUMA_NTL
+	/* zero all the values */
+	memset (info, 0, sizeof (*info));
+
+/*
+	if (!slot) {
+	    info->slot = 0;
+	    info->banks = 1;
+	    info->registered = 0;
+		    info->drb_size = 16;*/ /* 16 - 256MBit, 32 - 512MBit */
+/*	    info->tpar = 3;
+	    info->tras_clocks = 5;
+	    info->burst_len = 4;
+*/
+#ifdef CONFIG_MV64360_ECC
+	/* check for ECC/parity [0 = none, 1 = parity, 2 = ecc] */
+	dimmInfo->errorCheckType = 2;
+/*	    info->ecc = 2;*/
+#endif
+}
+
+return 0;
+
+#else
+	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
+	int ret;
+	unsigned int i, j, density = 1, devicesForErrCheck = 0;
+
+#ifdef DEBUG
+	unsigned int k;
+#endif
+	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
+	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
+	uchar supp_cal, cal_val;
+	ulong memclk, tmemclk;
+	ulong tmp;
+	uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
+	uchar data[128];
+
+	memclk = gd->bus_clk;
+	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
+
+	DP (puts ("before i2c read\n"));
+
+	ret = i2c_read (addr, 0, 1, data, 128);
+
+	DP (puts ("after i2c read\n"));
+
+	/* zero all the values */
+	memset (dimmInfo, 0, sizeof (*dimmInfo));
+
+	/* copy the SPD content 1:1 into the dimmInfo structure */
+	for (i = 0; i <= 127; i++) {
+		dimmInfo->spd_raw_data[i] = data[i];
+	}
+
+	if (ret) {
+		DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
+		return 0;
+	} else
+		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
+
+#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+
+	for (i = 0; i <= 127; i++) {
+		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
+			data[i]);
+	}
+
+#endif
+#ifdef DEBUG
+/* find Manufactura of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
+		dimmInfo->manufactura[i] = data[64 + i];
+	}
+	printf ("\nThis RAM-Module is produced by:		%s\n",
+		dimmInfo->manufactura);
+
+/* find Manul-ID of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
+		dimmInfo->modul_id[i] = data[73 + i];
+	}
+	printf ("The Module-ID of this RAM-Module is:		%s\n",
+		dimmInfo->modul_id);
+
+/* find Vendor-Data of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
+		dimmInfo->vendor_data[i] = data[99 + i];
+	}
+	printf ("Vendor Data of this RAM-Module is:		%s\n",
+		dimmInfo->vendor_data);
+
+/* find modul_serial_no of Dimm Module */
+	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
+	printf ("Serial No. of this RAM-Module is:		%ld (%lx)\n",
+		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
+
+/* find Manufac-Data of Dimm Module */
+	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
+	printf ("Manufactoring Date of this RAM-Module is:	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
+
+/* find modul_revision of Dimm Module */
+	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
+	printf ("Module Revision of this RAM-Module is:			%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
+
+/* find manufac_place of Dimm Module */
+	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
+	printf ("manufac_place of this RAM-Module is:		%d\n",
+		dimmInfo->manufac_place);
+
+#endif
+
+/*------------------------------------------------------------------------------------------------------------------------------*/
+/* calculate SPD checksum */
+/*------------------------------------------------------------------------------------------------------------------------------*/
+	spd_checksum = 0;
+
+	for (i = 0; i <= 62; i++) {
+		spd_checksum += data[i];
+	}
+
+	if ((spd_checksum & 0xff) != data[63]) {
+		printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]);
+		hang ();
+	}
+
+	else
+		printf ("SPD Checksum ok!\n");
+
+
+/*------------------------------------------------------------------------------------------------------------------------------*/
+	for (i = 2; i <= 35; i++) {
+		switch (i) {
+		case 2: /* Memory type (DDR / SDRAM) */
+			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
+#ifdef DEBUG
+			if (dimmInfo->memoryType == 0)
+				DP (printf
+				    ("Dram_type in slot %d is:			SDRAM\n",
+				     dimmInfo->slot));
+			if (dimmInfo->memoryType == 1)
+				DP (printf
+				    ("Dram_type in slot %d is:			DDRAM\n",
+				     dimmInfo->slot));
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 3: /* Number Of Row Addresses */
+			dimmInfo->numOfRowAddresses = data[i];
+			DP (printf
+			    ("Module Number of row addresses:		%d\n",
+			     dimmInfo->numOfRowAddresses));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 4: /* Number Of Column Addresses */
+			dimmInfo->numOfColAddresses = data[i];
+			DP (printf
+			    ("Module Number of col addresses:		%d\n",
+			     dimmInfo->numOfColAddresses));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 5: /* Number Of Module Banks */
+			dimmInfo->numOfModuleBanks = data[i];
+			DP (printf
+			    ("Number of Banks on Mod. :					%d\n",
+			     dimmInfo->numOfModuleBanks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 6: /* Data Width */
+			dimmInfo->dataWidth = data[i];
+			DP (printf
+			    ("Module Data Width:				%d\n",
+			     dimmInfo->dataWidth));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 8: /* Voltage Interface */
+			switch (data[i]) {
+			case 0x0:
+				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
+				DP (printf
+				    ("Module is						TTL_5V_TOLERANT\n"));
+				break;
+			case 0x1:
+				dimmInfo->voltageInterface = LVTTL;
+				DP (printf
+				    ("Module is						LVTTL\n"));
+				break;
+			case 0x2:
+				dimmInfo->voltageInterface = HSTL_1_5V;
+				DP (printf
+				    ("Module is						TTL_5V_TOLERANT\n"));
+				break;
+			case 0x3:
+				dimmInfo->voltageInterface = SSTL_3_3V;
+				DP (printf
+				    ("Module is						HSTL_1_5V\n"));
+				break;
+			case 0x4:
+				dimmInfo->voltageInterface = SSTL_2_5V;
+				DP (printf
+				    ("Module is						SSTL_2_5V\n"));
+				break;
+			default:
+				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
+				DP (printf
+				    ("Module is						VOLTAGE_UNKNOWN\n"));
+				break;
+			}
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 9: /* Minimum Cycle Time At Max CasLatancy */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
+				rightOfPoint;
+			DP (printf
+			    ("Minimum Cycle Time At Max CasLatancy:		%d.%d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 10:	/* Clock To Data Out */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOut_LoP = leftOfPoint;
+			dimmInfo->clockToDataOut_RoP = rightOfPoint;
+			DP (printf ("Clock To Data Out:					%d.%2d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->clockToDataOut */
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+/*#ifdef CONFIG_ECC */
+		case 11:	/* Error Check Type */
+			dimmInfo->errorCheckType = data[i];
+			DP (printf
+			    ("Error Check Type (0=NONE):			%d\n",
+			     dimmInfo->errorCheckType));
+			break;
+/* #endif */
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 12:	/* Refresh Interval */
+			dimmInfo->RefreshInterval = data[i];
+			DP (printf
+			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
+			     dimmInfo->RefreshInterval));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 13:	/* Sdram Width */
+			dimmInfo->sdramWidth = data[i];
+			DP (printf
+			    ("Sdram Width:					%d\n",
+			     dimmInfo->sdramWidth));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 14:	/* Error Check Data Width */
+			dimmInfo->errorCheckDataWidth = data[i];
+			DP (printf
+			    ("Error Check Data Width:			%d\n",
+			     dimmInfo->errorCheckDataWidth));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 15:	/* Minimum Clock Delay */
+			dimmInfo->minClkDelay = data[i];
+			DP (printf
+			    ("Minimum Clock Delay:				%d\n",
+			     dimmInfo->minClkDelay));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 16:	/* Burst Length Supported */
+			   /******-******-******-*******
+			   * bit3 | bit2 | bit1 | bit0 *
+			   *******-******-******-*******
+	    burst length = *  8	  |  4	 |   2	|   1  *
+			   *****************************
+
+	    If for example bit0 and bit2 are set, the burst
+	    length supported are 1 and 4. */
+
+			dimmInfo->burstLengthSupported = data[i];
+#ifdef DEBUG
+			DP (printf
+			    ("Burst Length Supported:			"));
+			if (dimmInfo->burstLengthSupported & 0x01)
+				DP (printf ("1, "));
+			if (dimmInfo->burstLengthSupported & 0x02)
+				DP (printf ("2, "));
+			if (dimmInfo->burstLengthSupported & 0x04)
+				DP (printf ("4, "));
+			if (dimmInfo->burstLengthSupported & 0x08)
+				DP (printf ("8, "));
+			DP (printf (" Bit \n"));
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 17:	/* Number Of Banks On Each Device */
+			dimmInfo->numOfBanksOnEachDevice = data[i];
+			DP (printf
+			    ("Number Of Banks On Each Chip:			%d\n",
+			     dimmInfo->numOfBanksOnEachDevice));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 18:	/* Suported Cas Latencies */
+
+			/*     DDR:
+			 *******-******-******-******-******-******-******-*******
+			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+			 *******-******-******-******-******-******-******-*******
+			 CAS =	 * TBD	| TBD  | 3.5  |	  3  | 2.5  |  2   | 1.5  |   1	 *
+			 *********************************************************
+			 SDRAM:
+			 *******-******-******-******-******-******-******-*******
+			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+			 *******-******-******-******-******-******-******-*******
+			 CAS =	 * TBD	|  7   |  6   |	 5   |	4   |  3   |   2  |   1	 *
+			 ********************************************************/
+			dimmInfo->suportedCasLatencies = data[i];
+#ifdef DEBUG
+			DP (printf
+			    ("Suported Cas Latencies: (CL)			"));
+			if (dimmInfo->memoryType == 0) {	/* SDRAM */
+				for (k = 0; k <= 7; k++) {
+					if (dimmInfo->
+					    suportedCasLatencies & (1 << k))
+						DP (printf
+						    ("%d,			",
+						     k + 1));
+				}
+
+			} else {	/* DDR-RAM */
+
+				if (dimmInfo->suportedCasLatencies & 1)
+					DP (printf ("1, "));
+				if (dimmInfo->suportedCasLatencies & 2)
+					DP (printf ("1.5, "));
+				if (dimmInfo->suportedCasLatencies & 4)
+					DP (printf ("2, "));
+				if (dimmInfo->suportedCasLatencies & 8)
+					DP (printf ("2.5, "));
+				if (dimmInfo->suportedCasLatencies & 16)
+					DP (printf ("3, "));
+				if (dimmInfo->suportedCasLatencies & 32)
+					DP (printf ("3.5, "));
+
+			}
+			DP (printf ("\n"));
+#endif
+			/* Calculating MAX CAS latency */
+			for (j = 7; j > 0; j--) {
+				if (((dimmInfo->
+				      suportedCasLatencies >> j) & 0x1) ==
+				    1) {
+					switch (dimmInfo->memoryType) {
+					case DDR:
+						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
+						switch (j) {
+						case 7:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				ERROR !!!\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								DDR_CL_FAULT;
+							hang ();
+							break;
+						case 6:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				ERROR !!!\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								DDR_CL_FAULT;
+							hang ();
+							break;
+						case 5:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				3.5 clk's\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_3_5;
+							break;
+						case 4:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				3 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_3;
+							break;
+						case 3:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				2.5 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_2_5;
+							break;
+						case 2:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				2 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_2;
+							break;
+						case 1:
+							DP (printf
+							    ("Max. Cas Latencies (DDR):				1.5 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_1_5;
+							break;
+						}
+
+						/* ronen - in case we have a DIMM with minimumCycleTimeAtMaxCasLatancy
+						   lower then our SDRAM cycle count, we won't be able to support this CAL
+						   and we will have to use lower CAL. (minus - means from 3.0 to 2.5) */
+						if ((dimmInfo->
+						     minimumCycleTimeAtMaxCasLatancy_LoP
+						     <
+						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						    ||
+						    ((dimmInfo->
+						      minimumCycleTimeAtMaxCasLatancy_LoP
+						      ==
+						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     && (dimmInfo->
+							 minimumCycleTimeAtMaxCasLatancy_RoP
+							 <
+							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+						{
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								dimmInfo->
+								maxClSupported_DDR
+								>> 1;
+							DP (printf
+							    ("*** Change actual Cas Latencies cause of minimumCycleTime n"));
+						}
+						/* ronen - checkif the Dimm frequency compared to the Sysclock. */
+						if ((dimmInfo->
+						     minimumCycleTimeAtMaxCasLatancy_LoP
+						     >
+						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						    ||
+						    ((dimmInfo->
+						      minimumCycleTimeAtMaxCasLatancy_LoP
+						      ==
+						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     && (dimmInfo->
+							 minimumCycleTimeAtMaxCasLatancy_RoP
+							 >
+							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+						{
+							printf ("*********************************************************\n");
+							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
+							printf ("*********************************************************\n");
+							hang ();
+						}
+
+						dimmInfo->
+							maxCASlatencySupported_LoP
+							=
+							1 +
+							(int) (5 * j / 10);
+						if (((5 * j) % 10) != 0)
+							dimmInfo->
+								maxCASlatencySupported_RoP
+								= 5;
+						else
+							dimmInfo->
+								maxCASlatencySupported_RoP
+								= 0;
+						DP (printf
+						    ("Max. Cas Latencies (DDR LoP.RoP Notation):	%d.%d \n",
+						     dimmInfo->
+						     maxCASlatencySupported_LoP,
+						     dimmInfo->
+						     maxCASlatencySupported_RoP));
+						break;
+					case SDRAM:
+						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
+						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded			*/
+						DP (printf
+						    ("Max. Cas Latencies (SD): %d\n",
+						     dimmInfo->
+						     maxClSupported_SD));
+						dimmInfo->
+							maxCASlatencySupported_LoP
+							= j;
+						dimmInfo->
+							maxCASlatencySupported_RoP
+							= 0;
+						DP (printf
+						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+						     dimmInfo->
+						     maxCASlatencySupported_LoP,
+						     dimmInfo->
+						     maxCASlatencySupported_RoP));
+						break;
+					}
+					break;
+				}
+			}
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 21:	/* Buffered Address And Control Inputs */
+			DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
+			dimmInfo->bufferedAddrAndControlInputs =
+				data[i] & BIT0;
+			dimmInfo->registeredAddrAndControlInputs =
+				(data[i] & BIT1) >> 1;
+			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
+			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
+			dimmInfo->registeredDQMBinputs =
+				(data[i] & BIT4) >> 4;
+			dimmInfo->differentialClockInput =
+				(data[i] & BIT5) >> 5;
+			dimmInfo->redundantRowAddressing =
+				(data[i] & BIT6) >> 6;
+#ifdef DEBUG
+			if (dimmInfo->bufferedAddrAndControlInputs == 1)
+				DP (printf
+				    (" - Buffered Address/Control Input:		Yes \n"));
+			else
+				DP (printf
+				    (" - Buffered Address/Control Input:		No \n"));
+
+			if (dimmInfo->registeredAddrAndControlInputs == 1)
+				DP (printf
+				    (" - Registered Address/Control Input:		Yes \n"));
+			else
+				DP (printf
+				    (" - Registered Address/Control Input:		No \n"));
+
+			if (dimmInfo->onCardPLL == 1)
+				DP (printf
+				    (" - On-Card PLL (clock):				Yes \n"));
+			else
+				DP (printf
+				    (" - On-Card PLL (clock):				No \n"));
+
+			if (dimmInfo->bufferedDQMBinputs == 1)
+				DP (printf
+				    (" - Bufferd DQMB Inputs:				Yes \n"));
+			else
+				DP (printf
+				    (" - Bufferd DQMB Inputs:				No \n"));
+
+			if (dimmInfo->registeredDQMBinputs == 1)
+				DP (printf
+				    (" - Registered DQMB Inputs:			Yes \n"));
+			else
+				DP (printf
+				    (" - Registered DQMB Inputs:			No \n"));
+
+			if (dimmInfo->differentialClockInput == 1)
+				DP (printf
+				    (" - Differential Clock Input:			Yes \n"));
+			else
+				DP (printf
+				    (" - Differential Clock Input:			No \n"));
+
+			if (dimmInfo->redundantRowAddressing == 1)
+				DP (printf
+				    (" - redundant Row Addressing:			Yes \n"));
+			else
+				DP (printf
+				    (" - redundant Row Addressing:			No \n"));
+
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 22:	/* Suported AutoPreCharge */
+			DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
+			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
+			dimmInfo->suportedAutoPreCharge =
+				(data[i] & BIT1) >> 1;
+			dimmInfo->suportedPreChargeAll =
+				(data[i] & BIT2) >> 2;
+			dimmInfo->suportedWrite1ReadBurst =
+				(data[i] & BIT3) >> 3;
+			dimmInfo->suported5PercentLowVCC =
+				(data[i] & BIT4) >> 4;
+			dimmInfo->suported5PercentUpperVCC =
+				(data[i] & BIT5) >> 5;
+#ifdef DEBUG
+			if (dimmInfo->suportedEarlyRasPreCharge == 1)
+				DP (printf
+				    (" - Early Ras Precharge:			Yes \n"));
+			else
+				DP (printf
+				    (" -  Early Ras Precharge:			No \n"));
+
+			if (dimmInfo->suportedAutoPreCharge == 1)
+				DP (printf
+				    (" - AutoPreCharge:				Yes \n"));
+			else
+				DP (printf
+				    (" -  AutoPreCharge:				No \n"));
+
+			if (dimmInfo->suportedPreChargeAll == 1)
+				DP (printf
+				    (" - Precharge All:				Yes \n"));
+			else
+				DP (printf
+				    (" -  Precharge All:				No \n"));
+
+			if (dimmInfo->suportedWrite1ReadBurst == 1)
+				DP (printf
+				    (" - Write 1/ReadBurst:				Yes \n"));
+			else
+				DP (printf
+				    (" -  Write 1/ReadBurst:				No \n"));
+
+			if (dimmInfo->suported5PercentLowVCC == 1)
+				DP (printf
+				    (" - lower VCC tolerance:			5 Percent \n"));
+			else
+				DP (printf
+				    ("	- lower VCC tolerance:			10 Percent \n"));
+
+			if (dimmInfo->suported5PercentUpperVCC == 1)
+				DP (printf
+				    (" - upper VCC tolerance:			5 Percent \n"));
+			else
+				DP (printf
+				    (" -  upper VCC tolerance:			10 Percent \n"));
+
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
+				rightOfPoint;
+			DP (printf ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
+			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out (2nd CL value):			%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
+				rightOfPoint;
+			DP (printf ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
+			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out (3rd CL value):			%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 27:	/* Minimum Row Precharge Time */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
+			trp_clocks =
+				(dimmInfo->minRowPrechargeTime +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
+			     tmemclk, tmemclk / 100, tmemclk % 100));
+			DP (printf
+			    ("Minimum Row Precharge Time [ns]:		%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 28:	/* Minimum Row Active to Row Active Time */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
+			trrd_clocks =
+				(dimmInfo->minRowActiveRowActiveDelay +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Row Active -To- Row Active Delay [ns]:	%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 29:	/* Minimum Ras-To-Cas Delay */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
+			trcd_clocks =
+				(dimmInfo->minRowActiveRowActiveDelay +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Ras-To-Cas Delay [ns]:			%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 30:	/* Minimum Ras Pulse Width */
+			dimmInfo->minRasPulseWidth = data[i];
+			tras_clocks =
+				(NSto10PS (data[i]) +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Ras Pulse Width [ns]:			%d = in Clk cycles %d\n",
+			     dimmInfo->minRasPulseWidth, tras_clocks));
+
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 31:	/* Module Bank Density */
+			dimmInfo->moduleBankDensity = data[i];
+			DP (printf
+			    ("Module Bank Density:				%d\n",
+			     dimmInfo->moduleBankDensity));
+#ifdef DEBUG
+			DP (printf
+			    ("*** Offered Densities (more than 1 = Multisize-Module): "));
+			{
+				if (dimmInfo->moduleBankDensity & 1)
+					DP (printf ("4MB, "));
+				if (dimmInfo->moduleBankDensity & 2)
+					DP (printf ("8MB, "));
+				if (dimmInfo->moduleBankDensity & 4)
+					DP (printf ("16MB, "));
+				if (dimmInfo->moduleBankDensity & 8)
+					DP (printf ("32MB, "));
+				if (dimmInfo->moduleBankDensity & 16)
+					DP (printf ("64MB, "));
+				if (dimmInfo->moduleBankDensity & 32)
+					DP (printf ("128MB, "));
+				if ((dimmInfo->moduleBankDensity & 64)
+				    || (dimmInfo->moduleBankDensity & 128)) {
+					DP (printf ("ERROR, "));
+					hang ();
+				}
+			}
+			DP (printf ("\n"));
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->addrAndCommandSetupTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Address And Command Setup Time [ns]:		%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 33:	/* Address And Command Hold Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->addrAndCommandHoldTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Address And Command Hold Time [ns]:		%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 34:	/* Data Input Setup Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->dataInputSetupTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Data Input Setup Time [ns]:			%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 35:	/* Data Input Hold Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->dataInputHoldTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Data Input Hold Time [ns]:			%d.%d\n\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+		}
+	}
+	/* calculating the sdram density */
+	for (i = 0;
+	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
+	     i++) {
+		density = density * 2;
+	}
+	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
+		dimmInfo->sdramWidth;
+	dimmInfo->numberOfDevices =
+		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
+		dimmInfo->numOfModuleBanks;
+	devicesForErrCheck =
+		(dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth;
+	if ((dimmInfo->errorCheckType == 0x1)
+	    || (dimmInfo->errorCheckType == 0x2)
+	    || (dimmInfo->errorCheckType == 0x3)) {
+		dimmInfo->size =
+			(dimmInfo->deviceDensity / 8) *
+			(dimmInfo->numberOfDevices -
+			 /* ronen on the 1G dimm we get wrong value. (was devicesForErrCheck) */
+			 dimmInfo->numberOfDevices / 8);
+	} else {
+		dimmInfo->size =
+			(dimmInfo->deviceDensity / 8) *
+			dimmInfo->numberOfDevices;
+	}
+
+	/* compute the module DRB size */
+	tmp = (1 <<
+	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
+	tmp *= dimmInfo->numOfModuleBanks;
+	tmp *= dimmInfo->sdramWidth;
+	tmp = tmp >> 24;	/* div by 0x4000000 (64M)	*/
+	dimmInfo->drb_size = (uchar) tmp;
+	DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
+
+	/* try a CAS latency of 3 first... */
+
+	/* bit 1 is CL2, bit 2 is CL3 */
+	supp_cal = (dimmInfo->suportedCasLatencies & 0x6) >> 1;
+
+	cal_val = 0;
+	if (supp_cal & 3) {
+		if (NS10to10PS (data[9]) <= tmemclk)
+			cal_val = 3;
+	}
+
+	/* then 2... */
+	if (supp_cal & 2) {
+		if (NS10to10PS (data[23]) <= tmemclk)
+			cal_val = 2;
+	}
+
+	DP (printf ("cal_val = %d\n", cal_val));
+
+	/* bummer, did't work... */
+	if (cal_val == 0) {
+		DP (printf ("Couldn't find a good CAS latency\n"));
+		hang ();
+		return 0;
+	}
+
+	return true;
+
+#endif
+}
+
+/* sets up the GT properly with information passed in */
+int setup_sdram (AUX_MEM_DIMM_INFO * info)
+{
+	ulong tmp, check;
+	ulong tmp_sdram_mode = 0;	/* 0x141c */
+	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
+	int i;
+
+	/* added 8/21/2003 P. Marchese */
+	unsigned int sdram_config_reg;
+
+	/* added 10/10/2003 P. Marchese */
+	ulong sdram_chip_size;
+
+	/* sanity checking */
+	if (!info->numOfModuleBanks) {
+		printf ("setup_sdram called with 0 banks\n");
+		return 1;
+	}
+
+	/* delay line */
+	set_dfcdlInit ();	/* may be its not needed */
+	DP (printf ("Delay line set done\n"));
+
+	/* set SDRAM mode NOP */ /* To_do check it */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
+	}
+
+	/* SDRAM configuration */
+/* added 8/21/2003 P. Marchese */
+/* code allows usage of registered DIMMS */
+
+	/* figure out the memory refresh internal */
+	switch (info->RefreshInterval) {
+	case 0x0:
+	case 0x80:		/* refresh period is 15.625 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+					/ (float) 1000000.0);
+		break;
+	case 0x1:
+	case 0x81:		/* refresh period is 3.9 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x2:
+	case 0x82:		/* refresh period is 7.8 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x3:
+	case 0x83:		/* refresh period is 31.3 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x4:
+	case 0x84:		/* refresh period is 62.5 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x5:
+	case 0x85:		/* refresh period is 125 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	default:		/* refresh period undefined */
+		printf ("DRAM refresh period is unknown!\n");
+		printf ("Aborting DRAM setup with an error\n");
+		hang ();
+		break;
+	}
+	DP (printf ("calculated refresh interval %0x\n", sdram_config_reg));
+
+	/* make sure the refresh value is only 14 bits */
+	if (sdram_config_reg > 0x1fff)
+		sdram_config_reg = 0x1fff;
+	DP (printf ("adjusted refresh interval %0x\n", sdram_config_reg));
+
+	/* we want physical bank interleaving and */
+	/* virtual bank interleaving enabled so do nothing */
+	/* since these bits need to be zero to enable the interleaving */
+
+	/*  registered DRAM ? */
+	if (info->registeredAddrAndControlInputs == 1) {
+		/* it's registered DRAM, so set the reg. DRAM bit */
+		sdram_config_reg = sdram_config_reg | BIT17;
+		DP (printf ("Enabling registered DRAM bit\n"));
+	}
+	/* turn on DRAM ECC? */
+#ifdef CONFIG_MV64360_ECC
+	if (info->errorCheckType == 0x2) {
+		/* DRAM has ECC, so turn it on */
+		sdram_config_reg = sdram_config_reg | BIT18;
+		DP (printf ("Enabling ECC\n"));
+	}
+#endif
+	/* set the data DQS pin configuration */
+	switch (info->sdramWidth) {
+	case 0x4:		/* memory is x4 */
+		sdram_config_reg = sdram_config_reg | BIT20 | BIT21;
+		DP (printf ("Data DQS pins set for 16 pins\n"));
+		break;
+	case 0x8:		/* memory is x8 or x16 */
+	case 0x10:
+		sdram_config_reg = sdram_config_reg | BIT21;
+		DP (printf ("Data DQS pins set for 8 pins\n"));
+		break;
+	case 0x20:		/* memory is x32 */
+		/* both bits are cleared for x32 so nothing to do */
+		DP (printf ("Data DQS pins set for 2 pins\n"));
+		break;
+	default:		/* memory width unsupported */
+		printf ("DRAM chip width is unknown!\n");
+		printf ("Aborting DRAM setup with an error\n");
+		hang ();
+		break;
+	}
+
+	/* perform read buffer assignments */
+	/* we are going to use the Power-up defaults */
+	/* bit 26 = CPU = buffer 1 */
+	/* bit 27 = PCI bus #0 = buffer 0 */
+	/* bit 28 = PCI bus #1 = buffer 0 */
+	/* bit 29 = MPSC = buffer 0 */
+	/* bit 30 = IDMA = buffer 0 */
+	/* bit 31 = Gigabit = buffer 0 */
+	sdram_config_reg = sdram_config_reg | BIT26;
+	/*  sdram_config_reg = sdram_config_reg | 0x58000000; */
+	/* sdram_config_reg = sdram_config_reg & 0xffffff00;  */
+
+	/* write the value into the SDRAM configuration register */
+	GT_REG_WRITE (SDRAM_CONFIG, sdram_config_reg);
+	DP (printf
+	    ("OOOOOOOOO sdram_conf 0x1400: %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
+
+	/* SDRAM open pages control keep open as much as I can */
+	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
+	DP (printf
+	    ("sdram_open_pages_controll 0x1414: %08x\n",
+	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
+
+	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
+	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
+	if (tmp == 0)
+		DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
+	else
+		DP (printf
+		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
+
+	/* SDRAM set CAS Latency according to SPD information */
+	switch (info->memoryType) {
+	case SDRAM:
+		printf ("### SD-RAM not supported !!!\n");
+		printf ("Aborting!!!\n");
+		hang ();
+		/* ToDo fill SD-RAM if needed !!!!! */
+		break;
+		/* Calculate the settings for SDRAM mode and Dunit control low registers */
+		/* Values set according to technical bulletin TB-92 rev. c */
+	case DDR:
+		DP (printf ("### SET-CL for DDR-RAM\n"));
+		switch (info->maxClSupported_DDR) {
+		case DDR_CL_3:
+			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
+			if (tmp == 1) { /* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x05110051;
+				else
+					tmp_dunit_control_low = 0x24110051;
+				DP (printf
+				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* clk sync. bypassed	*/
+
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x2C1107F2;
+				else
+					tmp_dunit_control_low = 0x3C1107d2;
+				DP (printf
+				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+		case DDR_CL_2_5:
+			tmp_sdram_mode = 0x62;	/* CL=2.5 Burstlength = 4 */
+			if (tmp == 1) { /* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x25110051;
+				else
+					tmp_dunit_control_low = 0x24110051;
+				DP (printf
+				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* clk sync. bypassed	*/
+
+				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
+					printf ("CL = 2.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
+					printf ("Aborting!!!\n");
+					hang ();
+				} else
+					tmp_dunit_control_low = 0x1B1107d2;
+				DP (printf
+				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+		case DDR_CL_2:
+			tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
+			if (tmp == 1) { /* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x04110051;
+				else
+					tmp_dunit_control_low = 0x03110051;
+				DP (printf
+				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* clk sync. bypassed	*/
+
+				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
+					printf ("CL = 2, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
+					printf ("Aborting!!!\n");
+					hang ();
+				} else
+					tmp_dunit_control_low = 0x3B1107d2;
+				DP (printf
+				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+		case DDR_CL_1_5:
+			tmp_sdram_mode = 0x52;	/* CL=1.5 Burstlength = 4 */
+			if (tmp == 1) { /* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x24110051;
+				else
+					tmp_dunit_control_low = 0x23110051;
+				DP (printf
+				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* clk sync. bypassed	*/
+
+				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
+					printf ("CL = 1.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
+					printf ("Aborting!!!\n");
+					hang ();
+				} else
+					tmp_dunit_control_low = 0x1A1107d2;
+				DP (printf
+				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+
+		default:
+			printf ("Max. CL is out of range %d\n",
+				info->maxClSupported_DDR);
+			hang ();
+			break;
+		}		/* end DDR switch */
+		break;
+	}			/* end CL switch */
+
+	/* Write results of CL detection procedure */
+	/* set SDRAM mode reg. 0x141c */
+	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
+
+	/* set SDRAM mode SetCommand 0x1418 */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 0x1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+	}
+
+	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
+	GT_REG_WRITE (D_UNIT_CONTROL_LOW, tmp_dunit_control_low);
+
+	/* set SDRAM mode SetCommand 0x1418 */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
+	}
+
+/*------------------------------------------------------------------------------ */
+
+	/* bank parameters */
+	/* SDRAM address decode register 0x1410 */
+	/* program this with the default value */
+	tmp = 0x02;		/* power-up default address select decoding value */
+
+	DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
+/* figure out the DRAM chip size */
+	sdram_chip_size =
+		(1 << (info->numOfRowAddresses + info->numOfColAddresses));
+	sdram_chip_size *= info->sdramWidth;
+	sdram_chip_size *= 4;
+	DP (printf ("computed sdram chip size is %#lx\n", sdram_chip_size));
+	/* divide sdram chip size by 64 Mbits */
+	sdram_chip_size = sdram_chip_size / 0x4000000;
+	switch (sdram_chip_size) {
+	case 1:		/* 64 Mbit */
+	case 2:		/* 128 Mbit */
+		DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
+		tmp |= (0x00 << 4);
+		break;
+	case 4:		/* 256 Mbit */
+	case 8:		/* 512 Mbit */
+		DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
+		tmp |= (0x01 << 4);
+		break;
+	case 16:		/* 1 Gbit */
+	case 32:		/* 2 Gbit */
+		DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
+		tmp |= (0x02 << 4);
+		break;
+	default:
+		printf ("Error in dram size calculation\n");
+		printf ("RAM-Device_size is unsupported\n");
+		hang ();
+	}
+
+	/* SDRAM address control */
+	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
+	DP (printf
+	    ("setting up sdram address control (0x1410) with: %08lx \n",
+	     tmp));
+
+/* ------------------------------------------------------------------------------ */
+/* same settings for registerd & non-registerd DDR SDRAM */
+	DP (printf
+	    ("setting up sdram_timing_control_low (0x1408) with: %08x \n",
+	     0x11511220));
+	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220);
+
+
+/* ------------------------------------------------------------------------------ */
+
+	/* SDRAM configuration */
+	tmp = GTREGREAD (SDRAM_CONFIG);
+
+	if (info->registeredAddrAndControlInputs
+	    || info->registeredDQMBinputs) {
+		tmp |= (1 << 17);
+		DP (printf
+		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
+		     info->registeredAddrAndControlInputs,
+		     info->registeredDQMBinputs));
+	}
+
+	/* Use buffer 1 to return read data to the CPU
+	 * Page 426 MV64360 */
+	tmp |= (1 << 26);
+	DP (printf
+	    ("Before Buffer assignment - sdram_conf (0x1400): %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
+	DP (printf
+	    ("After Buffer assignment - sdram_conf (0x1400): %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
+
+	/* SDRAM timing To_do: */
+/* ------------------------------------------------------------------------------ */
+
+	DP (printf
+	    ("setting up sdram_timing_control_high (0x140c) with: %08x \n",
+	     0x9));
+	GT_REG_WRITE (SDRAM_TIMING_CONTROL_HIGH, 0x9);
+
+	DP (printf
+	    ("setting up sdram address pads control (0x14c0) with: %08x \n",
+	     0x7d5014a));
+	GT_REG_WRITE (SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x7d5014a);
+
+	DP (printf
+	  indent: Standard input:1450: Warning:old style assignment ambiguity in "=*".	Assuming "= *"
+
+indent: Standard input:1451: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
+
+  ("setting up sdram data pads control (0x14c4) with: %08x \n",
+	     0x7d5014a));
+	GT_REG_WRITE (SDRAM_DATA_PADS_CALIBRATION, 0x7d5014a);
+
+/* ------------------------------------------------------------------------------ */
+
+	/* set the SDRAM configuration for each bank */
+
+/*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
+	{
+		i = info->slot;
+		DP (printf
+		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
+
+		/* map the bank */
+		memory_map_bank (i, 0, GB / 4);
+
+		/* set SDRAM mode */ /* To_do check it */
+		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+		check = GTREGREAD (SDRAM_OPERATION);
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
+		     check));
+
+
+		/* switch back to normal operation mode */
+		GT_REG_WRITE (SDRAM_OPERATION, 0);
+		check = GTREGREAD (SDRAM_OPERATION);
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
+		     check));
+
+		/* unmap the bank */
+		memory_map_bank (i, 0, 0);
+	}
+
+	return 0;
+
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+long int dram_size (long int *base, long int maxsize)
+{
+	volatile long int *addr, *b = base;
+	long int cnt, val, save1, save2;
+
+#define STARTVAL (1<<20)	/* start test at 1M */
+	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
+	     cnt <<= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		save1 = *addr;	/* save contents of addr */
+		save2 = *b;	/* save contents of base */
+
+		*addr = cnt;	/* write cnt to addr */
+		*b = 0;		/* put null at base */
+
+		/* check at base address */
+		if ((*b) != 0) {
+			*addr = save1;	/* restore *addr */
+			*b = save2;	/* restore *b */
+			return (0);
+		}
+		val = *addr;	/* read *addr */
+		val = *addr;	/* read *addr */
+
+		*addr = save1;
+		*b = save2;
+
+		if (val != cnt) {
+			DP (printf
+			    ("Found %08x  at Address %08x (failure)\n",
+			     (unsigned int) val, (unsigned int) addr));
+			/* fix boundary condition.. STARTVAL means zero */
+			if (cnt == STARTVAL / sizeof (long))
+				cnt = 0;
+			return (cnt * sizeof (long));
+		}
+	}
+	return maxsize;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* ppcboot interface function to SDRAM init - this is where all the
+ * controlling logic happens */
+long int initdram (int board_type)
+{
+	int s0 = 0, s1 = 0;
+	int checkbank[4] = {[0 ... 3] = 0 };
+	ulong realsize, total, check;
+	AUX_MEM_DIMM_INFO dimmInfo1;
+	AUX_MEM_DIMM_INFO dimmInfo2;
+	int nhr, bank_no;
+	ulong dest, memSpaceAttr;
+
+	/* first, use the SPD to get info about the SDRAM/ DDRRAM */
+
+	/* check the NHR bit and skip mem init if it's already done */
+	nhr = get_hid0 () & (1 << 16);
+
+	if (nhr) {
+		printf ("Skipping SD- DDRRAM setup due to NHR bit being set\n");
+	} else {
+		/* DIMM0 */
+		s0 = check_dimm (0, &dimmInfo1);
+
+		/* DIMM1 */
+		s1 = check_dimm (1, &dimmInfo2);
+
+		memory_map_bank (0, 0, 0);
+		memory_map_bank (1, 0, 0);
+		memory_map_bank (2, 0, 0);
+		memory_map_bank (3, 0, 0);
+
+		/* ronen check correct set of DIMMS */
+		if (dimmInfo1.numOfModuleBanks && dimmInfo2.numOfModuleBanks) {
+			if (dimmInfo1.errorCheckType !=
+			    dimmInfo2.errorCheckType)
+				printf ("***WARNNING***!!!! different ECC support of the DIMMS\n");
+			if (dimmInfo1.maxClSupported_DDR !=
+			    dimmInfo2.maxClSupported_DDR)
+				printf ("***WARNNING***!!!! different CAL setting of the DIMMS\n");
+			if (dimmInfo1.registeredAddrAndControlInputs !=
+			    dimmInfo2.registeredAddrAndControlInputs)
+				printf ("***WARNNING***!!!! different Registration setting of the DIMMS\n");
+		}
+
+		if (dimmInfo1.numOfModuleBanks && setup_sdram (&dimmInfo1)) {
+			printf ("Setup for DIMM1 failed.\n");
+		}
+
+		if (dimmInfo2.numOfModuleBanks && setup_sdram (&dimmInfo2)) {
+			printf ("Setup for DIMM2 failed.\n");
+		}
+
+		/* set the NHR bit */
+		set_hid0 (get_hid0 () | (1 << 16));
+	}
+	/* next, size the SDRAM banks */
+
+	realsize = total = 0;
+	check = GB / 4;
+	if (dimmInfo1.numOfModuleBanks > 0) {
+		checkbank[0] = 1;
+	}
+	if (dimmInfo1.numOfModuleBanks > 1) {
+		checkbank[1] = 1;
+	}
+	if (dimmInfo1.numOfModuleBanks > 2)
+		printf ("Error, SPD claims DIMM1 has >2 banks\n");
+
+	printf ("-- DIMM1 has %d banks\n", dimmInfo1.numOfModuleBanks);
+
+	if (dimmInfo2.numOfModuleBanks > 0) {
+		checkbank[2] = 1;
+	}
+	if (dimmInfo2.numOfModuleBanks > 1) {
+		checkbank[3] = 1;
+	}
+	if (dimmInfo2.numOfModuleBanks > 2)
+		printf ("Error, SPD claims DIMM2 has >2 banks\n");
+
+	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
+
+	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+		/* skip over banks that are not populated */
+		if (!checkbank[bank_no])
+			continue;
+
+		/* ronen - realsize = dram_size((long int *)total, check); */
+		if (bank_no == 0 || bank_no == 1) {
+			if (checkbank[1] == 1)
+				realsize = dimmInfo1.size / 2;
+			else
+				realsize = dimmInfo1.size;
+		}
+		if (bank_no == 2 || bank_no == 3) {
+			if (checkbank[3] == 1)
+				realsize = dimmInfo2.size / 2;
+			else
+				realsize = dimmInfo2.size;
+		}
+		memory_map_bank (bank_no, total, realsize);
+
+		/* ronen - initialize the DRAM for ECC */
+#ifdef CONFIG_MV64360_ECC
+		if ((dimmInfo1.errorCheckType != 0) &&
+		    ((dimmInfo2.errorCheckType != 0)
+		     || (dimmInfo2.numOfModuleBanks == 0))) {
+			printf ("ECC Initialization of Bank %d:", bank_no);
+			memSpaceAttr = ((~(BIT0 << bank_no)) & 0xf) << 8;
+			mvDmaSetMemorySpace (0, 0, memSpaceAttr, total,
+					     realsize);
+			for (dest = total; dest < total + realsize;
+			     dest += _8M) {
+				mvDmaTransfer (0, total, dest, _8M,
+					       BIT8 /*DMA_DTL_128BYTES */  |
+					       BIT3 /*DMA_HOLD_SOURCE_ADDR */
+					       |
+					       BIT11
+					       /*DMA_BLOCK_TRANSFER_MODE */ );
+				while (mvDmaIsChannelActive (0));
+			}
+			printf (" PASS\n");
+		}
+#endif
+
+		total += realsize;
+	}
+
+	/* ronen- add DRAM conf prints */
+	switch ((GTREGREAD (0x141c) >> 4) & 0x7) {
+	case 0x2:
+		printf ("CAS Latency = 2");
+		break;
+	case 0x3:
+		printf ("CAS Latency = 3");
+		break;
+	case 0x5:
+		printf ("CAS Latency = 1.5");
+		break;
+	case 0x6:
+		printf ("CAS Latency = 2.5");
+		break;
+	}
+	printf (" tRP = %d tRAS = %d tRCD=%d\n",
+		((GTREGREAD (0x1408) >> 8) & 0xf) + 1,
+		((GTREGREAD (0x1408) >> 20) & 0xf) + 1,
+		((GTREGREAD (0x1408) >> 4) & 0xf) + 1);
+
+/*	Setup Ethernet DMA Adress window to DRAM Area */
+	if (total > _256M)
+		printf ("*** ONLY the first 256MB DRAM memory are used out of the ");
+	else
+		printf ("Total SDRAM memory is ");
+	/* (cause all the 4 BATS are taken) */
+	return (total);
+}
+
+
+/* ronen- add Idma functions for usage of the ecc dram init. */
+/*******************************************************************************
+* mvDmaIsChannelActive - Checks if a engine is busy.
+********************************************************************************/
+int mvDmaIsChannelActive (int engine)
+{
+	ulong data;
+
+	data = GTREGREAD (MV64360_DMA_CHANNEL0_CONTROL + 4 * engine);
+	if (data & BIT14 /*activity status */ ) {
+		return 1;
+	}
+	return 0;
+}
+
+/*******************************************************************************
+* mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
+*			map.
+*******************************************************************************/
+int mvDmaSetMemorySpace (ulong memSpace,
+			 ulong memSpaceTarget,
+			 ulong memSpaceAttr, ulong baseAddress, ulong size)
+{
+	ulong temp;
+
+	/* The base address must be aligned to the size.  */
+	if (baseAddress % size != 0) {
+		return 0;
+	}
+	if (size >= 0x10000 /*64K */ ) {
+		size &= 0xffff0000;
+		baseAddress = (baseAddress & 0xffff0000);
+		/* Set the new attributes */
+		GT_REG_WRITE (MV64360_DMA_BASE_ADDR_REG0 + memSpace * 8,
+			      (baseAddress | memSpaceTarget | memSpaceAttr));
+		GT_REG_WRITE ((MV64360_DMA_SIZE_REG0 + memSpace * 8),
+			      (size - 1) & 0xffff0000);
+		temp = GTREGREAD (MV64360_DMA_BASE_ADDR_ENABLE_REG);
+		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
+			      (temp & ~(BIT0 << memSpace)));
+		return 1;
+	}
+	return 0;
+}
+
+
+/*******************************************************************************
+* mvDmaTransfer - Transfer data from sourceAddr to destAddr on one of the 4
+*		  DMA channels.
+********************************************************************************/
+int mvDmaTransfer (int engine, ulong sourceAddr,
+		   ulong destAddr, ulong numOfBytes, ulong command)
+{
+	ulong engOffReg = 0;	/* Engine Offset Register */
+
+	if (numOfBytes > 0xffff) {
+		command = command | BIT31 /*DMA_16M_DESCRIPTOR_MODE */ ;
+	}
+	command = command | ((command >> 6) & 0x7);
+	engOffReg = engine * 4;
+	GT_REG_WRITE (MV64360_DMA_CHANNEL0_BYTE_COUNT + engOffReg,
+		      numOfBytes);
+	GT_REG_WRITE (MV64360_DMA_CHANNEL0_SOURCE_ADDR + engOffReg,
+		      sourceAddr);
+	GT_REG_WRITE (MV64360_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg,
+		      destAddr);
+	command =
+		command | BIT12 /*DMA_CHANNEL_ENABLE */	 | BIT9
+		/*DMA_NON_CHAIN_MODE */ ;
+	/* Activate DMA engine By writting to mvDmaControlRegister */
+	GT_REG_WRITE (MV64360_DMA_CHANNEL0_CONTROL + engOffReg, command);
+	return 1;
+}
+
+/****************************************************************************************
+ *				SDRAM INIT						*
+ *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
+ *		  This procedure fits only the Atlantis					*
+ *											*
+ ***************************************************************************************/
+
+
+/****************************************************************************************
+ *				DFCDL initialize MV643xx Design Considerations		*
+ *											*
+ ***************************************************************************************/
+int set_dfcdlInit (void)
+{
+	int i;
+	unsigned int dfcdl_word = 0x391;	/*   0x14f;  ronen new dfcdl */
+
+	for (i = 0; i < 64; i++) {
+		GT_REG_WRITE (SRAM_DATA0, dfcdl_word);
+/*	dfcdl_word += 0x41;  - ronen new dfcdl */
+	}
+	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
+
+	return (0);
+}
diff --git a/board/Marvell/db64360/u-boot.lds b/board/Marvell/db64360/u-boot.lds
new file mode 100644
index 0000000000..0dfa8c0005
--- /dev/null
+++ b/board/Marvell/db64360/u-boot.lds
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/74xx_7xx/start.o	(.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/*    . = env_offset; */
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/Marvell/db64460/64460.h b/board/Marvell/db64460/64460.h
new file mode 100644
index 0000000000..8bb0ebfd21
--- /dev/null
+++ b/board/Marvell/db64460/64460.h
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * main board support/init for the Galileo Eval board DB64460.
+ */
+
+#ifndef __64460_H__
+#define __64460_H__
+
+/* CPU Configuration bits */
+#define CPU_CONF_ADDR_MISS_EN	(1 << 8)
+#define	CPU_CONF_SINGLE_CPU	(1 << 11)
+#define	CPU_CONF_ENDIANESS	(1 << 12)
+#define CPU_CONF_PIPELINE	(1 << 13)
+#define CPU_CONF_STOP_RETRY	(1 << 17)
+#define CPU_CONF_MULTI_DECODE	(1 << 18)
+#define CPU_CONF_DP_VALID	(1 << 19)
+#define CPU_CONF_PERR_PROP	(1 << 22)
+#define CPU_CONF_AACK_DELAY_2	(1 << 25)
+#define CPU_CONF_AP_VALID	(1 << 26)
+#define CPU_CONF_REMAP_WR_DIS	(1 << 27)
+
+/* CPU Master Control bits */
+#define CPU_MAST_CTL_ARB_EN	(1 << 8)
+#define CPU_MAST_CTL_MASK_BR_1	(1 << 9)
+#define CPU_MAST_CTL_M_WR_TRIG	(1 << 10)
+#define CPU_MAST_CTL_M_RD_TRIG	(1 << 11)
+#define CPU_MAST_CTL_CLEAN_BLK	(1 << 12)
+#define CPU_MAST_CTL_FLUSH_BLK	(1 << 13)
+
+#endif /* __64460_H__ */
diff --git a/board/Marvell/db64460/Makefile b/board/Marvell/db64460/Makefile
new file mode 100644
index 0000000000..768ccddbbf
--- /dev/null
+++ b/board/Marvell/db64460/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+SOBJS	= ../common/misc.o
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
+	  mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
+	  sdram_init.o ../common/intel_flash.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/Marvell/db64460/config.mk b/board/Marvell/db64460/config.mk
new file mode 100644
index 0000000000..5a434d9bca
--- /dev/null
+++ b/board/Marvell/db64460/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# EVB64460 boards
+#
+
+TEXT_BASE = 0xfff00000
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
new file mode 100644
index 0000000000..572dc47702
--- /dev/null
+++ b/board/Marvell/db64460/db64460.c
@@ -0,0 +1,936 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the DB64460 eval board based by Ingo.Assmus@keymile.com
+ */
+
+/*
+ * db64460.c - main board support/init for the Galileo Eval board.
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../include/memory.h"
+#include "../include/pci.h"
+#include "../include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "i2c.h"
+#include "64460.h"
+#include "mv_regs.h"
+
+#undef	DEBUG
+/*#define	DEBUG */
+
+#define	MAP_PCI
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+
+/* ------------------------------------------------------------------------- */
+
+/* this is the current GT register space location */
+/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+
+/* Unfortunately, we cant change it while we are in flash, so we initialize it
+ * to the "final" value. This means that any debug_led calls before
+ * board_pre_init wont work right (like in cpu_init_f).
+ * See also my_remap_gt_regs below. (NTL)
+ */
+
+void board_prebootm_init (void);
+unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+int display_mem_map (void);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * This is a version of the GT register space remapping function that
+ * doesn't touch globals (meaning, it's ok to run from flash.)
+ *
+ * Unfortunately, this has the side effect that a writable
+ * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
+ */
+
+void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
+{
+	u32 temp;
+
+	/* check and see if it's already moved */
+
+/* original ppcboot 1.1.6 source
+
+	temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
+	if ((temp & 0xffff) == new_loc >> 20)
+		return;
+
+	temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
+		0xffff0000) | (new_loc >> 20);
+
+	out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+	while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
+original ppcboot 1.1.6 source end */
+
+	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+	if ((temp & 0xffff) == new_loc >> 16)
+		return;
+
+	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+		0xffff0000) | (new_loc >> 16);
+
+	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+	while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
+}
+
+#ifdef CONFIG_PCI
+
+static void gt_pci_config (void)
+{
+	unsigned int stat;
+	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
+
+	/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
+	 * config registers by writing ones to the bus and device.
+	 * We then update the Virtual register with the correct value for the bus and device.
+	 */
+	if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
+		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+
+		GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
+			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+
+	}
+	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
+		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+		GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
+			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+	}
+
+	/* Enable master */
+	PCI_MASTER_ENABLE (0, SELF);
+	PCI_MASTER_ENABLE (1, SELF);
+
+	/* Enable PCI0/1 Mem0 and IO 0 disable all others */
+	GT_REG_READ (BASE_ADDR_ENABLE, &stat);
+	stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
+									     <<
+									     18);
+	stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
+	GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
+
+	/* ronen- add write to pci remap registers for 64460.
+	   in 64360 when writing to pci base go and overide remap automaticaly,
+	   in 64460 it doesn't */
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+
+	/* PCI interface settings */
+	/* Timeout set to retry forever */
+	GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
+	GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
+
+	/* ronen - enable only CS0 and Internal reg!! */
+	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+
+/*ronen update the pci internal registers base address.*/
+#ifdef MAP_PCI
+	for (stat = 0; stat <= PCI_HOST1; stat++)
+		pciWriteConfigReg (stat,
+				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
+				   SELF, CFG_GT_REGS);
+#endif
+
+}
+#endif
+
+/* Setup CPU interface paramaters */
+static void gt_cpu_config (void)
+{
+	cpu_t cpu = get_cpu_type ();
+	ulong tmp;
+
+	/* cpu configuration register */
+	tmp = GTREGREAD (CPU_CONFIGURATION);
+
+	/* set the SINGLE_CPU bit  see MV64460 P.399 */
+#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+	tmp |= CPU_CONF_SINGLE_CPU;
+#endif
+
+	tmp &= ~CPU_CONF_AACK_DELAY_2;
+
+	tmp |= CPU_CONF_DP_VALID;
+	tmp |= CPU_CONF_AP_VALID;
+
+	tmp |= CPU_CONF_PIPELINE;
+
+	GT_REG_WRITE (CPU_CONFIGURATION, tmp);	/* Marvell (VXWorks) writes 0x20220FF */
+
+	/* CPU master control register */
+	tmp = GTREGREAD (CPU_MASTER_CONTROL);
+
+	tmp |= CPU_MAST_CTL_ARB_EN;
+
+	if ((cpu == CPU_7400) ||
+	    (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
+
+		tmp |= CPU_MAST_CTL_CLEAN_BLK;
+		tmp |= CPU_MAST_CTL_FLUSH_BLK;
+
+	} else {
+		/* cleanblock must be cleared for CPUs
+		 * that do not support this command (603e, 750)
+		 * see Res#1 */
+		tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
+		tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
+	}
+	GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
+}
+
+/*
+ * board_pre_init.
+ *
+ * set up gal. device mappings, etc.
+ */
+int board_pre_init (void)
+{
+	uchar sram_boot = 0;
+
+	/*
+	 * set up the GT the way the kernel wants it
+	 * the call to move the GT register space will obviously
+	 * fail if it has already been done, but we're going to assume
+	 * that if it's not at the power-on location, it's where we put
+	 * it last time. (huber)
+	 */
+
+	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+
+	/* No PCI in first release of Port To_do: enable it. */
+#ifdef CONFIG_PCI
+	gt_pci_config ();
+#endif
+	/* mask all external interrupt sources */
+	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
+	/* new in MV6446x */
+	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
+	/* --------------------- */
+	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+	GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+	/* does not exist in MV6446x
+	   GT_REG_WRITE(CPU_INT_0_MASK, 0);
+	   GT_REG_WRITE(CPU_INT_1_MASK, 0);
+	   GT_REG_WRITE(CPU_INT_2_MASK, 0);
+	   GT_REG_WRITE(CPU_INT_3_MASK, 0);
+	   --------------------- */
+
+
+	/* ----- DEVICE BUS SETTINGS ------ */
+
+	/*
+	 * EVB
+	 * 0 - SRAM   ????
+	 * 1 - RTC      ????
+	 * 2 - UART     ????
+	 * 3 - Flash    checked 32Bit Intel Strata
+	 * boot - BootCS checked 8Bit 29LV040B
+	 *
+	 * Zuma
+	 * 0 - Flash
+	 * boot - BootCS
+	 */
+
+	/*
+	 * the dual 7450 module requires burst access to the boot
+	 * device, so the serial rom copies the boot device to the
+	 * on-board sram on the eval board, and updates the correct
+	 * registers to boot from the sram. (device0)
+	 */
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+		sram_boot = 1;
+	if (!sram_boot)
+		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+
+	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+
+
+	/* configure device timing */
+#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+	if (!sram_boot)
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+#endif
+
+#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#endif
+#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#endif
+
+#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+	/* detect if we are booting from the 32 bit flash */
+	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
+		/* 32 bit boot flash */
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
+			      CFG_32BIT_BOOT_PAR);
+	} else {
+		/* 8 bit boot flash */
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+	}
+#else
+	/* 8 bit boot flash only */
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+#endif
+
+
+	gt_cpu_config ();
+
+	/* MPP setup */
+	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	DEBUG_LED0_ON ();
+	DEBUG_LED1_ON ();
+	DEBUG_LED2_ON ();
+
+	return 0;
+}
+
+/* various things to do after relocation */
+
+int misc_init_r ()
+{
+	icache_enable ();
+#ifdef CFG_L2
+	l2cache_enable ();
+#endif
+#ifdef CONFIG_MPSC
+
+	mpsc_sdma_init ();
+	mpsc_init2 ();
+#endif
+
+#if 0
+	/* disable the dcache and MMU */
+	dcache_lock ();
+#endif
+	return 0;
+}
+
+void after_reloc (ulong dest_addr, gd_t * gd)
+{
+	/* check to see if we booted from the sram.  If so, move things
+	 * back to the way they should be. (we're running from main
+	 * memory at this point now */
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	}
+	display_mem_map ();
+	/* now, jump to the main ppcboot board init code */
+	board_init_r (gd, dest_addr);
+	/* NOTREACHED */
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ *
+ * right now, assume borad type. (there is just one...after all)
+ */
+
+int checkboard (void)
+{
+	int l_type = 0;
+
+	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	return (l_type);
+}
+
+/* utility functions */
+void debug_led (int led, int mode)
+{
+	volatile int *addr = 0;
+	int dummy;
+
+	if (mode == 1) {
+		switch (led) {
+		case 0:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x08000);
+			break;
+
+		case 1:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x0c000);
+			break;
+
+		case 2:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x10000);
+			break;
+		}
+	} else if (mode == 0) {
+		switch (led) {
+		case 0:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x14000);
+			break;
+
+		case 1:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x18000);
+			break;
+
+		case 2:
+			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+					0x1c000);
+			break;
+		}
+	}
+
+	dummy = *addr;
+}
+
+int display_mem_map (void)
+{
+	int i, j;
+	unsigned int base, size, width;
+
+	/* SDRAM */
+	printf ("SD (DDR) RAM\n");
+	for (i = 0; i <= BANK3; i++) {
+		base = memoryGetBankBaseAddress (i);
+		size = memoryGetBankSize (i);
+		if (size != 0) {
+			printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
+				i, base, size >> 20);
+		}
+	}
+
+	/* CPU's PCI windows */
+	for (i = 0; i <= PCI_HOST1; i++) {
+		printf ("\nCPU's PCI %d windows\n", i);
+		base = pciGetSpaceBase (i, PCI_IO);
+		size = pciGetSpaceSize (i, PCI_IO);
+		printf ("      IO: base - 0x%08x\tsize - %dM bytes\n", base,
+			size >> 20);
+		for (j = 0;
+		     j <=
+		     PCI_REGION0
+		     /*ronen currently only first PCI MEM is used 3 */ ;
+		     j++) {
+			base = pciGetSpaceBase (i, j);
+			size = pciGetSpaceSize (i, j);
+			printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
+		}
+	}
+
+	/* Devices */
+	printf ("\nDEVICES\n");
+	for (i = 0; i <= DEVICE3; i++) {
+		base = memoryGetDeviceBaseAddress (i);
+		size = memoryGetDeviceSize (i);
+		width = memoryGetDeviceWidth (i) * 8;
+		printf ("DEV %d:  base - 0x%08x  size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
+		if (i == 0)
+			printf ("\t- EXT SRAM (actual - 1M)\n");
+		else if (i == 1)
+			printf ("\t- RTC\n");
+		else if (i == 2)
+			printf ("\t- UART\n");
+		else
+			printf ("\t- LARGE FLASH\n");
+	}
+
+	/* Bootrom */
+	base = memoryGetDeviceBaseAddress (BOOT_DEVICE);	/* Boot */
+	size = memoryGetDeviceSize (BOOT_DEVICE);
+	width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
+	printf (" BOOT:  base - 0x%08x  size - %dM bytes\twidth - %d bits\n",
+		base, size >> 20, width);
+	return (0);
+}
+
+/* DRAM check routines copied from gw8260 */
+
+#if defined (CFG_DRAM_TEST)
+
+/*********************************************************************/
+/* NAME:  move64() -  moves a double word (64-bit)		     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   this function performs a double word move from the data at	     */
+/*   the source pointer to the location at the destination pointer.  */
+/*								     */
+/* INPUTS:							     */
+/*   unsigned long long *src  - pointer to data to move		     */
+/*								     */
+/* OUTPUTS:							     */
+/*   unsigned long long *dest - pointer to locate to move data	     */
+/*								     */
+/* RETURNS:							     */
+/*   None							     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*   May cloober fr0.						     */
+/*								     */
+/*********************************************************************/
+static void move64 (unsigned long long *src, unsigned long long *dest)
+{
+	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
+	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
+      : : : "fr0");		/* Clobbers fr0         */
+	return;
+}
+
+
+#if defined (CFG_DRAM_TEST_DATA)
+
+unsigned long long pattern[] = {
+	0xaaaaaaaaaaaaaaaa,
+	0xcccccccccccccccc,
+	0xf0f0f0f0f0f0f0f0,
+	0xff00ff00ff00ff00,
+	0xffff0000ffff0000,
+	0xffffffff00000000,
+	0x00000000ffffffff,
+	0x0000ffff0000ffff,
+	0x00ff00ff00ff00ff,
+	0x0f0f0f0f0f0f0f0f,
+	0x3333333333333333,
+	0x5555555555555555
+};
+
+/*********************************************************************/
+/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Tests data lines for shorts and opens by forcing adjacent data  */
+/*   to opposite states. Because the data lines could be routed in   */
+/*   an arbitrary manner the must ensure test patterns ensure that   */
+/*   every case is tested. By using the following series of binary   */
+/*   patterns every combination of adjacent bits is test regardless  */
+/*   of routing.						     */
+/*								     */
+/*     ...101010101010101010101010				     */
+/*     ...110011001100110011001100				     */
+/*     ...111100001111000011110000				     */
+/*     ...111111110000000011111111				     */
+/*								     */
+/*   Carrying this out, gives us six hex patterns as follows:	     */
+/*								     */
+/*     0xaaaaaaaaaaaaaaaa					     */
+/*     0xcccccccccccccccc					     */
+/*     0xf0f0f0f0f0f0f0f0					     */
+/*     0xff00ff00ff00ff00					     */
+/*     0xffff0000ffff0000					     */
+/*     0xffffffff00000000					     */
+/*								     */
+/*   The number test patterns will always be given by:		     */
+/*								     */
+/*   log(base 2)(number data bits) = log2 (64) = 6		     */
+/*								     */
+/*   To test for short and opens to other signals on our boards. we  */
+/*   simply							     */
+/*   test with the 1's complemnt of the paterns as well.	     */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays failing test pattern				     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*  Assumes only one one SDRAM bank				     */
+/*								     */
+/*********************************************************************/
+int mem_test_data (void)
+{
+	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long temp64;
+	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
+	int i;
+	unsigned int hi, lo;
+
+	for (i = 0; i < num_patterns; i++) {
+		move64 (&(pattern[i]), pmem);
+		move64 (pmem, &temp64);
+
+		/* hi = (temp64>>32) & 0xffffffff;          */
+		/* lo = temp64 & 0xffffffff;                */
+		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+
+		hi = (pattern[i] >> 32) & 0xffffffff;
+		lo = pattern[i] & 0xffffffff;
+		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
+
+		if (temp64 != pattern[i]) {
+			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
+				hi, lo);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+#endif /* CFG_DRAM_TEST_DATA */
+
+#if defined (CFG_DRAM_TEST_ADDRESS)
+/*********************************************************************/
+/* NAME:  mem_test_address() -	test address lines		     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   This function performs a test to verify that each word im	     */
+/*   memory is uniquly addressable. The test sequence is as follows: */
+/*								     */
+/*   1) write the address of each word to each word.		     */
+/*   2) verify that each location equals its address		     */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays failing test pattern and address			     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int mem_test_address (void)
+{
+	volatile unsigned int *pmem =
+		(volatile unsigned int *) CFG_MEMTEST_START;
+	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+	unsigned int i;
+
+	/* write address to each location */
+	for (i = 0; i < size; i++) {
+		pmem[i] = i;
+	}
+
+	/* verify each loaction */
+	for (i = 0; i < size; i++) {
+		if (pmem[i] != i) {
+			printf ("\n   Address Test Failed at 0x%x", i);
+			return 1;
+		}
+	}
+	return 0;
+}
+#endif /* CFG_DRAM_TEST_ADDRESS */
+
+#if defined (CFG_DRAM_TEST_WALK)
+/*********************************************************************/
+/* NAME:   mem_march() -  memory march				     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Marches up through memory. At each location verifies rmask if   */
+/*   read = 1. At each location write wmask if	write = 1. Displays  */
+/*   failing address and pattern.				     */
+/*								     */
+/* INPUTS:							     */
+/*   volatile unsigned long long * base - start address of test	     */
+/*   unsigned int size - number of dwords(64-bit) to test	     */
+/*   unsigned long long rmask - read verify mask		     */
+/*   unsigned long long wmask - wrtie verify mask		     */
+/*   short read - verifies rmask if read = 1			     */
+/*   short write  - writes wmask if write = 1			     */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays failing test pattern and address			     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int mem_march (volatile unsigned long long *base,
+	       unsigned int size,
+	       unsigned long long rmask,
+	       unsigned long long wmask, short read, short write)
+{
+	unsigned int i;
+	unsigned long long temp;
+	unsigned int hitemp, lotemp, himask, lomask;
+
+	for (i = 0; i < size; i++) {
+		if (read != 0) {
+			/* temp = base[i]; */
+			move64 ((unsigned long long *) &(base[i]), &temp);
+			if (rmask != temp) {
+				hitemp = (temp >> 32) & 0xffffffff;
+				lotemp = temp & 0xffffffff;
+				himask = (rmask >> 32) & 0xffffffff;
+				lomask = rmask & 0xffffffff;
+
+				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
+				return 1;
+			}
+		}
+		if (write != 0) {
+			/*  base[i] = wmask; */
+			move64 (&wmask, (unsigned long long *) &(base[i]));
+		}
+	}
+	return 0;
+}
+#endif /* CFG_DRAM_TEST_WALK */
+
+/*********************************************************************/
+/* NAME:   mem_test_walk() -  a simple walking ones test	     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Performs a walking ones through entire physical memory. The     */
+/*   test uses as series of memory marches, mem_march(), to verify   */
+/*   and write the test patterns to memory. The test sequence is as  */
+/*   follows:							     */
+/*     1) march writing 0000...0001				     */
+/*     2) march verifying 0000...0001  , writing  0000...0010	     */
+/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
+/*	   the write mask equals 1000...0000			     */
+/*     4) march verifying 1000...0000				     */
+/*   The test fails if any of the memory marches return a failure.   */
+/*								     */
+/* OUTPUTS:							     */
+/*   Displays which pass on the memory test is executing	     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int mem_test_walk (void)
+{
+	unsigned long long mask;
+	volatile unsigned long long *pmem =
+		(volatile unsigned long long *) CFG_MEMTEST_START;
+	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+
+	unsigned int i;
+
+	mask = 0x01;
+
+	printf ("Initial Pass");
+	mem_march (pmem, size, 0x0, 0x1, 0, 1);
+
+	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+	printf ("		");
+	printf ("         ");
+	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+	for (i = 0; i < 63; i++) {
+		printf ("Pass %2d", i + 2);
+		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
+			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
+			return 1;
+		}
+		mask = mask << 1;
+		printf ("\b\b\b\b\b\b\b");
+	}
+
+	printf ("Last Pass");
+	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
+		/* printf("mask: 0x%x", mask); */
+		return 1;
+	}
+	printf ("\b\b\b\b\b\b\b\b\b");
+	printf ("	     ");
+	printf ("\b\b\b\b\b\b\b\b\b");
+
+	return 0;
+}
+
+/*********************************************************************/
+/* NAME:    testdram() -  calls any enabled memory tests	     */
+/*								     */
+/* DESCRIPTION:							     */
+/*   Runs memory tests if the environment test variables are set to  */
+/*   'y'.							     */
+/*								     */
+/* INPUTS:							     */
+/*   testdramdata    - If set to 'y', data test is run.		     */
+/*   testdramaddress - If set to 'y', address test is run.	     */
+/*   testdramwalk    - If set to 'y', walking ones test is run	     */
+/*								     */
+/* OUTPUTS:							     */
+/*   None							     */
+/*								     */
+/* RETURNS:							     */
+/*   0 -  Passed test						     */
+/*   1 -  Failed test						     */
+/*								     */
+/* RESTRICTIONS/LIMITATIONS:					     */
+/*								     */
+/*								     */
+/*********************************************************************/
+int testdram (void)
+{
+	char *s;
+	int rundata, runaddress, runwalk;
+
+	s = getenv ("testdramdata");
+	rundata = (s && (*s == 'y')) ? 1 : 0;
+	s = getenv ("testdramaddress");
+	runaddress = (s && (*s == 'y')) ? 1 : 0;
+	s = getenv ("testdramwalk");
+	runwalk = (s && (*s == 'y')) ? 1 : 0;
+
+/*    rundata = 1; */
+/*    runaddress = 0; */
+/*    runwalk = 0; */
+
+	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+	}
+#ifdef CFG_DRAM_TEST_DATA
+	if (rundata == 1) {
+		printf ("Test DATA ...  ");
+		if (mem_test_data () == 1) {
+			printf ("failed \n");
+			return 1;
+		} else
+			printf ("ok \n");
+	}
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+	if (runaddress == 1) {
+		printf ("Test ADDRESS ...  ");
+		if (mem_test_address () == 1) {
+			printf ("failed \n");
+			return 1;
+		} else
+			printf ("ok \n");
+	}
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+	if (runwalk == 1) {
+		printf ("Test WALKING ONEs ...  ");
+		if (mem_test_walk () == 1) {
+			printf ("failed \n");
+			return 1;
+		} else
+			printf ("ok \n");
+	}
+#endif
+	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+		printf ("passed\n");
+	}
+	return 0;
+
+}
+#endif /* CFG_DRAM_TEST */
+
+/* ronen - the below functions are used by the bootm function           */
+/*  - we map the base register to fbe00000 (same mapping as in the LSP) */
+/*  - we turn off the RX gig dmas - to prevent the dma from overunning  */
+/*    the kernel data areas.                                            */
+/*  - we diable and invalidate the icache and dcache.                   */
+void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
+{
+	u32 temp;
+
+	temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+	if ((temp & 0xffff) == new_loc >> 16)
+		return;
+
+	temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+		0xffff0000) | (new_loc >> 16);
+
+	out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+	while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
+							new_loc |
+							(INTERNAL_SPACE_DECODE)))))
+	       != temp);
+
+}
+
+void board_prebootm_init ()
+{
+
+/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
+		GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
+
+/* Stop GigE Rx DMA engines */
+	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
+	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00);
+	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
+
+/* Relocate MV64460 internal regs */
+	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+
+	icache_disable ();
+	invalidate_l1_instruction_cache ();
+	flush_data_cache ();
+	dcache_disable ();
+}
diff --git a/board/Marvell/db64460/eth.h b/board/Marvell/db64460/eth.h
new file mode 100644
index 0000000000..6c3b2e0ba0
--- /dev/null
+++ b/board/Marvell/db64460/eth.h
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __EVB64460_ETH_H__
+#define __EVB64460_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+
+int db64460_eth0_poll(void);
+int db64460_eth0_transmit(unsigned int s, volatile char *p);
+void db64460_eth0_disable(void);
+bool network_start(bd_t *bis);
+
+#endif /* __EVB64460_ETH_H__ */
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
new file mode 100644
index 0000000000..33fbc49162
--- /dev/null
+++ b/board/Marvell/db64460/mpsc.c
@@ -0,0 +1,1019 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+  ************************************************************************/
+
+/*
+ * mpsc.c - driver for console over the MPSC.
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <asm/cache.h>
+
+#include <malloc.h>
+#include "mpsc.h"
+
+#include "mv_regs.h"
+
+#include "../include/memory.h"
+
+/* Define this if you wish to use the MPSC as a register based UART.
+ * This will force the serial port to not use the SDMA engine at all.
+ */
+#undef CONFIG_MPSC_DEBUG_PORT
+
+
+int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
+char (*mpsc_getchar) (void) = mpsc_getchar_debug;
+int (*mpsc_test_char) (void) = mpsc_test_char_debug;
+
+
+static volatile unsigned int *rx_desc_base = NULL;
+static unsigned int rx_desc_index = 0;
+static volatile unsigned int *tx_desc_base = NULL;
+static unsigned int tx_desc_index = 0;
+
+/* local function declarations */
+static int galmpsc_connect (int channel, int connect);
+static int galmpsc_route_rx_clock (int channel, int brg);
+static int galmpsc_route_tx_clock (int channel, int brg);
+static int galmpsc_write_config_regs (int mpsc, int mode);
+static int galmpsc_config_channel_regs (int mpsc);
+static int galmpsc_set_char_length (int mpsc, int value);
+static int galmpsc_set_stop_bit_length (int mpsc, int value);
+static int galmpsc_set_parity (int mpsc, int value);
+static int galmpsc_enter_hunt (int mpsc);
+static int galmpsc_set_brkcnt (int mpsc, int value);
+static int galmpsc_set_tcschar (int mpsc, int value);
+static int galmpsc_set_snoop (int mpsc, int value);
+static int galmpsc_shutdown (int mpsc);
+
+static int galsdma_set_RFT (int channel);
+static int galsdma_set_SFM (int channel);
+static int galsdma_set_rxle (int channel);
+static int galsdma_set_txle (int channel);
+static int galsdma_set_burstsize (int channel, unsigned int value);
+static int galsdma_set_RC (int channel, unsigned int value);
+
+static int galbrg_set_CDV (int channel, int value);
+static int galbrg_enable (int channel);
+static int galbrg_disable (int channel);
+static int galbrg_set_clksrc (int channel, int value);
+static int galbrg_set_CUV (int channel, int value);
+
+static void galsdma_enable_rx (void);
+static int galsdma_set_mem_space (unsigned int memSpace,
+				  unsigned int memSpaceTarget,
+				  unsigned int memSpaceAttr,
+				  unsigned int baseAddress,
+				  unsigned int size);
+
+
+#define SOFTWARE_CACHE_MANAGEMENT
+
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
+#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
+#else
+#define FLUSH_DCACHE(a,b)
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
+#define INVALIDATE_DCACHE(a,b)
+#endif
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+static void mpsc_debug_init (void)
+{
+
+	volatile unsigned int temp;
+
+	/* Clear the CFR  (CHR4) */
+	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
+	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&".  Assuming "= &"
+
+REG_GAP));
+	temp &= 0xffffff00;
+	temp |= BIT29;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
+		      temp);
+
+	/* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
+	temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
+	temp |= (BIT12 | BIT15);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
+		      temp);
+
+	/* Set int mask */
+	temp = GTREGREAD (GALMPSC_0_INT_MASK);
+	temp |= BIT6;
+	GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
+}
+#endif
+
+char mpsc_getchar_debug (void)
+{
+	volatile int temp;
+	volatile unsigned int cause;
+
+	cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+	while ((cause & BIT6) == 0) {
+		cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+	}
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
+			  (CHANNEL * GALMPSC_REG_GAP));
+	/* By writing 1's to the set bits, the register is cleared */
+	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
+		      temp);
+	GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
+	return (temp >> 16) & 0xff;
+}
+
+/* special function for running out of flash.  doesn't modify any
+ * global variables [josh] */
+int mpsc_putchar_early (char ch)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int mpsc = CHANNEL;
+	int temp =
+		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	galmpsc_set_tcschar (mpsc, ch);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
+		      temp | 0x200);
+
+#define MAGIC_FACTOR	(10*1000000)
+
+	udelay (MAGIC_FACTOR / gd->baudrate);
+	return 0;
+}
+
+/* This is used after relocation, see serial.c and mpsc_init2 */
+static int mpsc_putchar_sdma (char ch)
+{
+	volatile unsigned int *p;
+	unsigned int temp;
+
+
+	/* align the descriptor */
+	p = tx_desc_base;
+	memset ((void *) p, 0, 8 * sizeof (unsigned int));
+
+	/* fill one 64 bit buffer */
+	/* word swap, pad with 0 */
+	p[4] = 0;		/* x */
+	p[5] = (unsigned int) ch;	/* x */
+
+	/* CHANGED completely according to GT64260A dox - NTL */
+	p[0] = 0x00010001;	/* 0 */
+	p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* 4 */
+	p[2] = 0;		/* 8 */
+	p[3] = (unsigned int) &p[4];	/* c */
+
+#if 0
+	p[9] = DESC_FIRST | DESC_LAST;
+	p[10] = (unsigned int) &p[0];
+	p[11] = (unsigned int) &p[12];
+#endif
+
+	FLUSH_DCACHE (&p[0], &p[8]);
+
+	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+		      (unsigned int) &p[0]);
+	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+		      (unsigned int) &p[0]);
+
+	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+	temp |= (TX_DEMAND | TX_STOP);
+	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+	INVALIDATE_DCACHE (&p[1], &p[2]);
+
+	while (p[1] & DESC_OWNER_BIT) {
+		udelay (100);
+		INVALIDATE_DCACHE (&p[1], &p[2]);
+	}
+	return 0;
+}
+
+char mpsc_getchar_sdma (void)
+{
+	static unsigned int done = 0;
+	volatile char ch;
+	unsigned int len = 0, idx = 0, temp;
+
+	volatile unsigned int *p;
+
+
+	do {
+		p = &rx_desc_base[rx_desc_index * 8];
+
+		INVALIDATE_DCACHE (&p[0], &p[1]);
+		/* Wait for character */
+		while (p[1] & DESC_OWNER_BIT) {
+			udelay (100);
+			INVALIDATE_DCACHE (&p[0], &p[1]);
+		}
+
+		/* Handle error case */
+		if (p[1] & (1 << 15)) {
+			printf ("oops, error: %08x\n", p[1]);
+
+			temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
+					  (CHANNEL * GALMPSC_REG_GAP));
+			temp |= (1 << 23);
+			GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
+				      (CHANNEL * GALMPSC_REG_GAP), temp);
+
+			/* Can't poll on abort bit, so we just wait. */
+			udelay (100);
+
+			galsdma_enable_rx ();
+		}
+
+		/* Number of bytes left in this descriptor */
+		len = p[0] & 0xffff;
+
+		if (len) {
+			/* Where to look */
+			idx = 5;
+			if (done > 3)
+				idx = 4;
+			if (done > 7)
+				idx = 7;
+			if (done > 11)
+				idx = 6;
+
+			INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
+			ch = p[idx] & 0xff;
+			done++;
+		}
+
+		if (done < len) {
+			/* this descriptor has more bytes still
+			 * shift down the char we just read, and leave the
+			 * buffer in place for the next time around
+			 */
+			p[idx] = p[idx] >> 8;
+			FLUSH_DCACHE (&p[idx], &p[idx + 1]);
+		}
+
+		if (done == len) {
+			/* nothing left in this descriptor.
+			 * go to next one
+			 */
+			p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+			p[0] = 0x00100000;
+			FLUSH_DCACHE (&p[0], &p[1]);
+			/* Next descriptor */
+			rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+			done = 0;
+		}
+	} while (len == 0);	/* galileo bug.. len might be zero */
+
+	return ch;
+}
+
+
+int mpsc_test_char_debug (void)
+{
+	if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
+		return 0;
+	else {
+		return 1;
+	}
+}
+
+
+int mpsc_test_char_sdma (void)
+{
+	volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
+
+	INVALIDATE_DCACHE (&p[1], &p[2]);
+
+	if (p[1] & DESC_OWNER_BIT)
+		return 0;
+	else
+		return 1;
+}
+
+int mpsc_init (int baud)
+{
+	/* BRG CONFIG */
+	galbrg_set_baudrate (CHANNEL, baud);
+	galbrg_set_clksrc (CHANNEL, 8);	/* set source=Tclk */
+	galbrg_set_CUV (CHANNEL, 0);	/* set up CountUpValue */
+	galbrg_enable (CHANNEL);	/* Enable BRG */
+
+	/* Set up clock routing */
+	galmpsc_connect (CHANNEL, GALMPSC_CONNECT);	/* connect it */
+
+	galmpsc_route_rx_clock (CHANNEL, CHANNEL);	/* chosse BRG0 for Rx */
+	galmpsc_route_tx_clock (CHANNEL, CHANNEL);	/* chose BRG0 for Tx */
+
+	/* reset MPSC state */
+	galmpsc_shutdown (CHANNEL);
+
+	/* SDMA CONFIG */
+	galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8);	/* in 64 bit words (8 bytes) */
+	galsdma_set_txle (CHANNEL);
+	galsdma_set_rxle (CHANNEL);
+	galsdma_set_RC (CHANNEL, 0xf);
+	galsdma_set_SFM (CHANNEL);
+	galsdma_set_RFT (CHANNEL);
+
+	/* MPSC CONFIG */
+	galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
+	galmpsc_config_channel_regs (CHANNEL);
+	galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8);	/* 8 */
+	galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE);	/* N */
+	galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1);	/* 1 */
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+	mpsc_debug_init ();
+#endif
+
+	/* COMM_MPSC CONFIG */
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+	galmpsc_set_snoop (CHANNEL, 0);	/* disable snoop */
+#else
+	galmpsc_set_snoop (CHANNEL, 1);	/* enable snoop */
+#endif
+
+	return 0;
+}
+
+
+void mpsc_sdma_init (void)
+{
+/* Setup SDMA channel0 SDMA_CONFIG_REG*/
+	GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
+
+/*  Enable MPSC-Window0 for DRAM Bank0   */
+	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT,
+				   MV64460_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_0_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK0)) != true)
+		printf ("%s: SDMA_Window0 memory setup failed !!! \n",
+			__FUNCTION__);
+
+
+/*  Disable MPSC-Window1    */
+	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT,
+				   MV64460_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_1_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK3)) != true)
+		printf ("%s: SDMA_Window1 memory setup failed !!! \n",
+			__FUNCTION__);
+
+
+/*  Disable MPSC-Window2 */
+	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT,
+				   MV64460_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_2_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK3)) != true)
+		printf ("%s: SDMA_Window2 memory setup failed !!! \n",
+			__FUNCTION__);
+
+
+/*  Disable MPSC-Window3 */
+	if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT,
+				   MV64460_SDMA_DRAM_CS_0_TARGET,
+				   0,
+				   memoryGetBankBaseAddress
+				   (CS_3_LOW_DECODE_ADDRESS),
+				   memoryGetBankSize (BANK3)) != true)
+		printf ("%s: SDMA_Window3 memory setup failed !!! \n",
+			__FUNCTION__);
+
+/*  Setup MPSC0 access mode Window0 full access */
+	GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
+			 (MV64460_SDMA_WIN_ACCESS_FULL <<
+			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+/*  Setup MPSC1 access mode Window1 full access */
+	GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
+			 (MV64460_SDMA_WIN_ACCESS_FULL <<
+			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+/* Setup MPSC internal address space base address 	*/
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+
+/* no high address remap*/
+	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
+	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
+
+/* clear interrupt cause register for MPSC (fault register)*/
+	GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
+}
+
+
+void mpsc_init2 (void)
+{
+	int i;
+
+#ifndef CONFIG_MPSC_DEBUG_PORT
+	mpsc_putchar = mpsc_putchar_sdma;
+	mpsc_getchar = mpsc_getchar_sdma;
+	mpsc_test_char = mpsc_test_char_sdma;
+#endif
+	/* RX descriptors */
+	rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
+						sizeof (unsigned int));
+
+	/* align descriptors */
+	rx_desc_base = (unsigned int *)
+		(((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
+
+	rx_desc_index = 0;
+
+	memset ((void *) rx_desc_base, 0,
+		(RX_DESC * 8) * sizeof (unsigned int));
+
+	for (i = 0; i < RX_DESC; i++) {
+		rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4];	/* Buffer */
+		rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8];	/* Next descriptor */
+		rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;	/* Command & control */
+		rx_desc_base[i * 8] = 0x00100000;
+	}
+	rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
+
+	FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
+	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+		      (unsigned int) &rx_desc_base[0]);
+
+	/* TX descriptors */
+	tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
+						sizeof (unsigned int));
+
+	/* align descriptors */
+	tx_desc_base = (unsigned int *)
+		(((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
+
+	tx_desc_index = -1;
+
+	memset ((void *) tx_desc_base, 0,
+		(TX_DESC * 8) * sizeof (unsigned int));
+
+	for (i = 0; i < TX_DESC; i++) {
+		tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
+		tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
+		tx_desc_base[i * 8 + 3] =
+			(unsigned int) &tx_desc_base[i * 8 + 4];
+		tx_desc_base[i * 8 + 2] =
+			(unsigned int) &tx_desc_base[(i + 1) * 8];
+		tx_desc_base[i * 8 + 1] =
+			DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+
+		/* set sbytecnt and shadow byte cnt to 1 */
+		tx_desc_base[i * 8] = 0x00010001;
+	}
+	tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
+
+	FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
+
+	udelay (100);
+
+	galsdma_enable_rx ();
+
+	return;
+}
+
+int galbrg_set_baudrate (int channel, int rate)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int clock;
+
+	galbrg_disable (channel);	/*ok */
+
+#ifdef ZUMA_NTL
+	/* from tclk */
+	clock = (CFG_TCLK / (16 * rate)) - 1;
+#else
+	clock = (CFG_TCLK / (16 * rate)) - 1;
+#endif
+
+	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
+
+	galbrg_enable (channel);
+
+	gd->baudrate = rate;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* Below are all the private functions that no one else needs */
+
+static int galbrg_set_CDV (int channel, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp &= 0xFFFF0000;
+	temp |= (value & 0x0000FFFF);
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galbrg_enable (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp |= 0x00010000;
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galbrg_disable (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp &= 0xFFFEFFFF;
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galbrg_set_clksrc (int channel, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp &= 0xFFC3FFFF;	/* Bit 18 - 21 (MV 64260 18-22) */
+	temp |= (value << 18);
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+	return 0;
+}
+
+static int galbrg_set_CUV (int channel, int value)
+{
+	/* set CountUpValue */
+	GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
+
+	return 0;
+}
+
+#if 0
+static int galbrg_reset (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp |= 0x20000;
+	GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+#endif
+
+static int galsdma_set_RFT (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000001;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_SFM (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000002;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_rxle (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000040;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_txle (int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp |= 0x00000080;
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_RC (int channel, unsigned int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp &= ~0x0000003c;
+	temp |= (value << 2);
+	GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+		      temp);
+
+	return 0;
+}
+
+static int galsdma_set_burstsize (int channel, unsigned int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+	temp &= 0xFFFFCFFF;
+	switch (value) {
+	case 8:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x3 << 12)));
+		break;
+
+	case 4:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x2 << 12)));
+		break;
+
+	case 2:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x1 << 12)));
+		break;
+
+	case 1:
+		GT_REG_WRITE (GALSDMA_0_CONF_REG +
+			      (channel * GALSDMA_REG_DIFF),
+			      (temp | (0x0 << 12)));
+		break;
+
+	default:
+		return -1;
+		break;
+	}
+
+	return 0;
+}
+
+static int galmpsc_connect (int channel, int connect)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
+
+	if ((channel == 0) && connect)
+		temp &= ~0x00000007;
+	else if ((channel == 1) && connect)
+		temp &= ~(0x00000007 << 6);
+	else if ((channel == 0) && !connect)
+		temp |= 0x00000007;
+	else
+		temp |= (0x00000007 << 6);
+
+	/* Just in case... */
+	temp &= 0x3fffffff;
+
+	GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
+
+	return 0;
+}
+
+static int galmpsc_route_rx_clock (int channel, int brg)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_RxC_ROUTE);
+
+	if (channel == 0) {
+		temp &= ~0x0000000F;
+		temp |= brg;
+	} else {
+		temp &= ~0x00000F00;
+		temp |= (brg << 8);
+	}
+
+	GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
+
+	return 0;
+}
+
+static int galmpsc_route_tx_clock (int channel, int brg)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_TxC_ROUTE);
+
+	if (channel == 0) {
+		temp &= ~0x0000000F;
+		temp |= brg;
+	} else {
+		temp &= ~0x00000F00;
+		temp |= (brg << 8);
+	}
+
+	GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
+
+	return 0;
+}
+
+static int galmpsc_write_config_regs (int mpsc, int mode)
+{
+	if (mode == GALMPSC_UART) {
+		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
+		GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
+			      0x000004c4);
+
+		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
+		GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
+			      0x024003f8);
+		/*        22 2222 1111 */
+		/*        54 3210 9876 */
+		/* 0000 0010 0000 0000 */
+		/*       1 */
+		/*       098 7654 3210 */
+		/* 0000 0011 1111 1000 */
+	} else
+		return -1;
+
+	return 0;
+}
+
+static int galmpsc_config_channel_regs (int mpsc)
+{
+	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
+
+	galmpsc_set_brkcnt (mpsc, 0x3);
+	galmpsc_set_tcschar (mpsc, 0xab);
+
+	return 0;
+}
+
+static int galmpsc_set_brkcnt (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0x0000FFFF;
+	temp |= (value << 16);
+	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_tcschar (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0xFFFF0000;
+	temp |= value;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_char_length (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0xFFFFCFFF;
+	temp |= (value << 12);
+	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_stop_bit_length (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+	temp &= 0xFFFFBFFF;
+	temp |= (value << 14);
+	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_set_parity (int mpsc, int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	if (value != -1) {
+		temp &= 0xFFF3FFF3;
+		temp |= ((value << 18) | (value << 2));
+		temp |= ((value << 17) | (value << 1));
+	} else {
+		temp &= 0xFFF1FFF1;
+	}
+
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	return 0;
+}
+
+static int galmpsc_enter_hunt (int mpsc)
+{
+	int temp;
+
+	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	temp |= 0x80000000;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
+	       MPSC_ENTER_HUNT) {
+		udelay (1);
+	}
+	return 0;
+}
+
+
+static int galmpsc_shutdown (int mpsc)
+{
+	unsigned int temp;
+
+	/* cause RX abort (clears RX) */
+	temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
+	temp &= ~MPSC_ENTER_HUNT;
+	GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+	GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
+	GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+
+	/* shut down the MPSC */
+	GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
+	GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
+	GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
+
+	udelay (100);
+
+	/* shut down the sdma engines. */
+	/* reset config to default */
+	GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
+
+	udelay (100);
+
+	/* clear the SDMA current and first TX and RX pointers */
+	GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
+	GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
+	GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
+
+	udelay (100);
+
+	return 0;
+}
+
+static void galsdma_enable_rx (void)
+{
+	int temp;
+
+	/* Enable RX processing */
+	temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+	temp |= RX_ENABLE;
+	GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+	galmpsc_enter_hunt (CHANNEL);
+}
+
+static int galmpsc_set_snoop (int mpsc, int value)
+{
+	int reg =
+		mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
+		MPSC_0_ADDRESS_CONTROL_LOW;
+	int temp = GTREGREAD (reg);
+
+	if (value)
+		temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
+	else
+		temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
+	GT_REG_WRITE (reg, temp);
+	return 0;
+}
+
+/*******************************************************************************
+* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map.
+*
+* DESCRIPTION:
+*       the MV64460 SDMA has its own address decoding map that is de-coupled
+*       from the CPU interface address decoding windows. The SDMA channels
+*       share four address windows. Each region can be individually configured
+*       by this function by associating it to a target interface and setting
+*       base and size values.
+*
+*      NOTE!!!
+*       The size must be in 64Kbyte granularity.
+*       The base address must be aligned to the size.
+*       The size must be a series of 1s followed by a series of zeros
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       True for success, false otherwise.
+*
+*******************************************************************************/
+
+static int galsdma_set_mem_space (unsigned int memSpace,
+				  unsigned int memSpaceTarget,
+				  unsigned int memSpaceAttr,
+				  unsigned int baseAddress, unsigned int size)
+{
+	unsigned int temp;
+
+	if (size == 0) {
+		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
+				   1 << memSpace);
+		return true;
+	}
+
+	/* The base address must be aligned to the size.  */
+	if (baseAddress % size != 0) {
+		return false;
+	}
+	if (size < 0x10000) {
+		return false;
+	}
+
+	/* Align size and base to 64K */
+	baseAddress &= 0xffff0000;
+	size &= 0xffff0000;
+	temp = size >> 16;
+
+	/* Checking that the size is a sequence of '1' followed by a
+	   sequence of '0' starting from LSB to MSB. */
+	while ((temp > 0) && (temp & 0x1)) {
+		temp = temp >> 1;
+	}
+
+	if (temp != 0) {
+		GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
+			      (baseAddress | memSpaceTarget | memSpaceAttr));
+		GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8),
+			      (size - 1) & 0xffff0000);
+		GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
+				   1 << memSpace);
+	} else {
+		/* An invalid size was specified */
+		return false;
+	}
+	return true;
+}
diff --git a/board/Marvell/db64460/mpsc.h b/board/Marvell/db64460/mpsc.h
new file mode 100644
index 0000000000..3cc0c0f7a5
--- /dev/null
+++ b/board/Marvell/db64460/mpsc.h
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+  ************************************************************************/
+
+
+/*
+ * mpsc.h - header file for MPSC in uart mode (console driver)
+ */
+
+#ifndef __MPSC_H__
+#define __MPSC_H__
+
+/* include actual Galileo defines */
+#include "../include/mv_gen_reg.h"
+
+/* driver related defines */
+
+int mpsc_init(int baud);
+void mpsc_sdma_init(void);
+void mpsc_init2(void);
+int galbrg_set_baudrate(int channel, int rate);
+
+int mpsc_putchar_early(char ch);
+char mpsc_getchar_debug(void);
+int mpsc_test_char_debug(void);
+
+int mpsc_test_char_sdma(void);
+
+extern int (*mpsc_putchar)(char ch);
+extern char (*mpsc_getchar)(void);
+extern int (*mpsc_test_char)(void);
+
+#define CHANNEL CONFIG_MPSC_PORT
+
+#define TX_DESC     5
+#define RX_DESC     20
+
+#define DESC_FIRST  0x00010000
+#define DESC_LAST   0x00020000
+#define DESC_OWNER_BIT  0x80000000
+
+#define TX_DEMAND   0x00800000
+#define TX_STOP     0x00010000
+#define RX_ENABLE   0x00000080
+
+#define SDMA_RX_ABORT 		  (1 << 15)
+#define SDMA_TX_ABORT 		  (1 << 31)
+#define MPSC_TX_ABORT 		  (1 << 7)
+#define MPSC_RX_ABORT             (1 << 23)
+#define MPSC_ENTER_HUNT           (1 << 31)
+
+/* MPSC defines */
+
+#define GALMPSC_CONNECT            0x1
+#define GALMPSC_DISCONNECT         0x0
+
+#define GALMPSC_UART               0x1
+
+#define GALMPSC_STOP_BITS_1        0x0
+#define GALMPSC_STOP_BITS_2        0x1
+#define GALMPSC_CHAR_LENGTH_8      0x3
+#define GALMPSC_CHAR_LENGTH_7      0x2
+
+#define GALMPSC_PARITY_ODD         0x0
+#define GALMPSC_PARITY_EVEN        0x2
+#define GALMPSC_PARITY_MARK        0x3
+#define GALMPSC_PARITY_SPACE       0x1
+#define GALMPSC_PARITY_NONE        -1
+
+#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
+#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
+#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
+#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
+#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
+#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
+#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
+
+#define GALMPSC_REG_GAP            0x1000
+
+#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
+#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
+#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
+#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
+#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
+#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
+#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
+#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
+#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
+#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
+#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
+#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
+
+#define GALSDMA_COMMAND_FIRST     (1 << 16)
+#define GALSDMA_COMMAND_LAST      (1 << 17)
+#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
+#define GALSDMA_COMMAND_AUTO      (1 << 30)
+#define GALSDMA_COMMAND_OWNER     (1 << 31)
+
+#define GALSDMA_RX                 0
+#define GALSDMA_TX                 1
+
+/* CHANNEL2 should be CHANNEL1, according to documentation,
+ * but to work with the current GTREGS file...
+ */
+#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
+#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
+#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
+#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
+#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
+#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
+#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
+#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
+#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
+#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
+#define GALSDMA_REG_DIFF           0x2000
+
+/* WRONG in gt64260R.h */
+#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
+#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
+#define GALMPSC_0_INT_CAUSE        0xb804
+#define GALMPSC_0_INT_MASK         0xb884
+
+#define GALSDMA_MODE_UART          0
+#define GALSDMA_MODE_BISYNC        1
+#define GALSDMA_MODE_HDLC          2
+#define GALSDMA_MODE_TRANSPARENT   3
+
+#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
+#define GALBRG_REG_GAP             0x0008
+#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
+
+#endif /* __MPSC_H__ */
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
new file mode 100644
index 0000000000..b78fda35c0
--- /dev/null
+++ b/board/Marvell/db64460/mv_eth.c
@@ -0,0 +1,3182 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.c - header file for the polled mode GT ethernet driver
+ */
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+
+#include "mv_eth.h"
+
+/* enable Debug outputs */
+
+#undef DEBUG_MV_ETH
+
+#ifdef DEBUG_MV_ETH
+#define DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+#undef MV64460_CHECKSUM_OFFLOAD
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The first part is the high level driver of the gigE ethernet ports.   *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+/* Definition for configuring driver */
+/* #define UPDATE_STATS_BY_SOFTWARE */
+#undef MV64460_RX_QUEUE_FILL_ON_TASK
+
+
+/* Constants */
+#define MAGIC_ETH_RUNNING		8031971
+#define MV64460_INTERNAL_SRAM_SIZE                      _256K
+#define EXTRA_BYTES 32
+#define WRAP       ETH_HLEN + 2 + 4 + 16
+#define BUFFER_MTU dev->mtu + WRAP
+#define INT_CAUSE_UNMASK_ALL		0x0007ffff
+#define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
+#ifdef MV64460_RX_FILL_ON_TASK
+#define INT_CAUSE_MASK_ALL		0x00000000
+#define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
+#define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
+#endif
+
+/* Read/Write to/from MV64460 internal registers */
+#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
+#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
+#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
+#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
+
+/* Static function declarations */
+static int mv64460_eth_real_open (struct eth_device *eth);
+static int mv64460_eth_real_stop (struct eth_device *eth);
+static struct net_device_stats *mv64460_eth_get_stats (struct eth_device
+						       *dev);
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
+static void mv64460_eth_update_stat (struct eth_device *dev);
+bool db64460_eth_start (struct eth_device *eth);
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+				   unsigned int mib_offset);
+int mv64460_eth_receive (struct eth_device *dev);
+
+int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length);
+
+#ifndef  UPDATE_STATS_BY_SOFTWARE
+static void mv64460_eth_print_stat (struct eth_device *dev);
+#endif
+/* Processes a received packet */
+extern void NetReceive (volatile uchar *, int);
+
+extern unsigned int INTERNAL_REG_BASE_ADDR;
+
+/*************************************************
+ *Helper functions - used inside the driver only *
+ *************************************************/
+#ifdef DEBUG_MV_ETH
+void print_globals (struct eth_device *dev)
+{
+	printf ("Ethernet PRINT_Globals-Debug function\n");
+	printf ("Base Address for ETH_PORT_INFO:	%08x\n",
+		(unsigned int) dev->priv);
+	printf ("Base Address for mv64460_eth_priv:	%08x\n",
+		(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
+				 port_private));
+
+	printf ("GT Internal Base Address:	%08x\n",
+		INTERNAL_REG_BASE_ADDR);
+	printf ("Base Address for TX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE);
+	printf ("Base Address for RX-DESCs:	%08x	Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE);
+	printf ("Base Address for RX-Buffer:	%08x	allocated Bytes %d\n",
+		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+		p_rx_buffer_base[0],
+		(MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32);
+	printf ("Base Address for TX-Buffer:	%08x	allocated Bytes %d\n",
+		(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+		p_tx_buffer_base[0],
+		(MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32);
+}
+#endif
+
+#define my_cpu_to_le32(x) my_le32_to_cpu((x))
+
+unsigned long my_le32_to_cpu (unsigned long x)
+{
+	return (((x & 0x000000ffU) << 24) |
+		((x & 0x0000ff00U) << 8) |
+		((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
+}
+
+
+/**********************************************************************
+ * mv64460_eth_print_phy_status
+ *
+ * Prints gigabit ethenret phy status
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64460_eth_print_phy_status (struct eth_device *dev)
+{
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+	ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	unsigned int port_status, phy_reg_data;
+
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Check Link status on phy */
+	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+	if (!(phy_reg_data & 0x20)) {
+		printf ("Ethernet port changed link status to DOWN\n");
+	} else {
+		port_status =
+			MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
+		printf ("Ethernet status port %d: Link up", port_num);
+		printf (", %s",
+			(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
+		if (port_status & BIT4)
+			printf (", Speed 1 Gbps");
+		else
+			printf (", %s",
+				(port_status & BIT5) ? "Speed 100 Mbps" :
+				"Speed 10 Mbps");
+		printf ("\n");
+	}
+}
+
+/**********************************************************************
+ * u-boot entry functions for mv64460_eth
+ *
+ **********************************************************************/
+int db64460_eth_probe (struct eth_device *dev)
+{
+	return ((int) db64460_eth_start (dev));
+}
+
+int db64460_eth_poll (struct eth_device *dev)
+{
+	return mv64460_eth_receive (dev);
+}
+
+int db64460_eth_transmit (struct eth_device *dev, volatile void *packet,
+			  int length)
+{
+	mv64460_eth_xmit (dev, packet, length);
+	return 0;
+}
+
+void db64460_eth_disable (struct eth_device *dev)
+{
+	mv64460_eth_stop (dev);
+}
+
+
+void mv6446x_eth_initialize (bd_t * bis)
+{
+	struct eth_device *dev;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	int devnum, x, temp;
+	char *s, *e, buf[64];
+
+	for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
+		dev = calloc (sizeof (*dev), 1);
+		if (!dev) {
+			printf ("%s: mv_enet%d allocation failure, %s\n",
+				__FUNCTION__, devnum, "eth_device structure");
+			return;
+		}
+
+		/* must be less than NAMESIZE (16) */
+		sprintf (dev->name, "mv_enet%d", devnum);
+
+#ifdef DEBUG
+		printf ("Initializing %s\n", dev->name);
+#endif
+
+		/* Extract the MAC address from the environment */
+		switch (devnum) {
+		case 0:
+			s = "ethaddr";
+			break;
+
+		case 1:
+			s = "eth1addr";
+			break;
+
+		case 2:
+			s = "eth2addr";
+			break;
+
+		default:	/* this should never happen */
+			printf ("%s: Invalid device number %d\n",
+				__FUNCTION__, devnum);
+			return;
+		}
+
+		temp = getenv_r (s, buf, sizeof (buf));
+		s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+		printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+		for (x = 0; x < 6; ++x) {
+			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+		/* ronen - set the MAC addr in the HW */
+		eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
+
+		dev->init = (void *) db64460_eth_probe;
+		dev->halt = (void *) ethernet_phy_reset;
+		dev->send = (void *) db64460_eth_transmit;
+		dev->recv = (void *) db64460_eth_poll;
+
+		dev->priv = (void *) ethernet_private =
+			calloc (sizeof (*ethernet_private), 1);
+		if (!ethernet_private) {
+			printf ("%s: %s allocation failure, %s\n",
+				__FUNCTION__, dev->name,
+				"Private Device Structure");
+			free (dev);
+			return;
+		}
+		/* start with an zeroed ETH_PORT_INFO */
+		memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
+		memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+		/* set pointer to memory for stats data structure etc... */
+		ethernet_private->port_private = (void *) port_private =
+			calloc (sizeof (*ethernet_private), 1);
+		if (!port_private) {
+			printf ("%s: %s allocation failure, %s\n",
+				__FUNCTION__, dev->name,
+				"Port Private Device Structure");
+
+			free (ethernet_private);
+			free (dev);
+			return;
+		}
+
+		port_private->stats =
+			calloc (sizeof (struct net_device_stats), 1);
+		if (!port_private->stats) {
+			printf ("%s: %s allocation failure, %s\n",
+				__FUNCTION__, dev->name,
+				"Net stat Structure");
+
+			free (port_private);
+			free (ethernet_private);
+			free (dev);
+			return;
+		}
+		memset (ethernet_private->port_private, 0,
+			sizeof (struct mv64460_eth_priv));
+		switch (devnum) {
+		case 0:
+			ethernet_private->port_num = ETH_0;
+			break;
+		case 1:
+			ethernet_private->port_num = ETH_1;
+			break;
+		case 2:
+			ethernet_private->port_num = ETH_2;
+			break;
+		default:
+			printf ("Invalid device number %d\n", devnum);
+			break;
+		};
+
+		port_private->port_num = devnum;
+		/*
+		 * Read MIB counter on the GT in order to reset them,
+		 * then zero all the stats fields in memory
+		 */
+		mv64460_eth_update_stat (dev);
+		memset (port_private->stats, 0,
+			sizeof (struct net_device_stats));
+		/* Extract the MAC address from the environment */
+		switch (devnum) {
+		case 0:
+			s = "ethaddr";
+			break;
+
+		case 1:
+			s = "eth1addr";
+			break;
+
+		case 2:
+			s = "eth2addr";
+			break;
+
+		default:	/* this should never happen */
+			printf ("%s: Invalid device number %d\n",
+				__FUNCTION__, devnum);
+			return;
+		}
+
+		temp = getenv_r (s, buf, sizeof (buf));
+		s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+		printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+		for (x = 0; x < 6; ++x) {
+			dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+
+		DP (printf ("Allocating descriptor and buffer rings\n"));
+
+		ethernet_private->p_rx_desc_area_base[0] =
+			(ETH_RX_DESC *) memalign (16,
+						  RX_DESC_ALIGNED_SIZE *
+						  MV64460_RX_QUEUE_SIZE + 1);
+		ethernet_private->p_tx_desc_area_base[0] =
+			(ETH_TX_DESC *) memalign (16,
+						  TX_DESC_ALIGNED_SIZE *
+						  MV64460_TX_QUEUE_SIZE + 1);
+
+		ethernet_private->p_rx_buffer_base[0] =
+			(char *) memalign (16,
+					   MV64460_RX_QUEUE_SIZE *
+					   MV64460_TX_BUFFER_SIZE + 1);
+		ethernet_private->p_tx_buffer_base[0] =
+			(char *) memalign (16,
+					   MV64460_RX_QUEUE_SIZE *
+					   MV64460_TX_BUFFER_SIZE + 1);
+
+#ifdef DEBUG_MV_ETH
+		/* DEBUG OUTPUT prints adresses of globals */
+		print_globals (dev);
+#endif
+		eth_register (dev);
+
+	}
+	DP (printf ("%s: exit\n", __FUNCTION__));
+
+}
+
+/**********************************************************************
+ * mv64460_eth_open
+ *
+ * This function is called when openning the network device. The function
+ * should initialize all the hardware, initialize cyclic Rx/Tx
+ * descriptors chain and buffers and allocate an IRQ to the network
+ * device.
+ *
+ * Input : a pointer to the network device structure
+ * / / ronen - changed the output to match  net/eth.c needs
+ * Output : nonzero of success , zero if fails.
+ * under construction
+ **********************************************************************/
+
+int mv64460_eth_open (struct eth_device *dev)
+{
+	return (mv64460_eth_real_open (dev));
+}
+
+/* Helper function for mv64460_eth_open */
+static int mv64460_eth_real_open (struct eth_device *dev)
+{
+
+	unsigned int queue;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+	u32 port_status, phy_reg_data;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	/* ronen - when we update the MAC env params we only update dev->enetaddr
+	   see ./net/eth.c eth_set_enetaddr() */
+	memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Stop RX Queues */
+	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+		      0x0000ff00);
+
+	/* Clear the ethernet port interrupts */
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+
+	/* Unmask RX buffer and TX end interrupt */
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num),
+		      INT_CAUSE_UNMASK_ALL);
+
+	/* Unmask phy and link status changes interrupts */
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
+		      INT_CAUSE_UNMASK_ALL_EXT);
+
+	/* Set phy address of the port */
+	ethernet_private->port_phy_addr = 0x8 + port_num;
+
+	/* Activate the DMA channels etc */
+	eth_port_init (ethernet_private);
+
+
+	/* "Allocate" setup TX rings */
+
+	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
+		unsigned int size;
+
+		port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE;
+		size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE);	/*size = no of DESCs times DESC-size */
+		ethernet_private->tx_desc_area_size[queue] = size;
+
+		/* first clear desc area completely */
+		memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
+			0, ethernet_private->tx_desc_area_size[queue]);
+
+		/* initialize tx desc ring with low level driver */
+		if (ether_init_tx_desc_ring
+		    (ethernet_private, ETH_Q0,
+		     port_private->tx_ring_size[queue],
+		     MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+		     (unsigned int) ethernet_private->
+		     p_tx_desc_area_base[queue],
+		     (unsigned int) ethernet_private->
+		     p_tx_buffer_base[queue]) == false)
+			printf ("### Error initializing TX Ring\n");
+	}
+
+	/* "Allocate" setup RX rings */
+	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
+		unsigned int size;
+
+		/* Meantime RX Ring are fixed - but must be configurable by user */
+		port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE;
+		size = (port_private->rx_ring_size[queue] *
+			RX_DESC_ALIGNED_SIZE);
+		ethernet_private->rx_desc_area_size[queue] = size;
+
+		/* first clear desc area completely */
+		memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
+			0, ethernet_private->rx_desc_area_size[queue]);
+		if ((ether_init_rx_desc_ring
+		     (ethernet_private, ETH_Q0,
+		      port_private->rx_ring_size[queue],
+		      MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+		      (unsigned int) ethernet_private->
+		      p_rx_desc_area_base[queue],
+		      (unsigned int) ethernet_private->
+		      p_rx_buffer_base[queue])) == false)
+			printf ("### Error initializing RX Ring\n");
+	}
+
+	eth_port_start (ethernet_private);
+
+	/* Set maximum receive buffer to 9700 bytes */
+	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num),
+		      (0x5 << 17) |
+		      (MV_REG_READ
+		       (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num))
+		       & 0xfff1ffff));
+
+	/*
+	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
+	 * disable the leaky bucket mechanism .
+	 */
+
+	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
+	port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
+
+	/* Check Link status on phy */
+	eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+	if (!(phy_reg_data & 0x20)) {
+		/* Reset PHY */
+		if ((ethernet_phy_reset (port_num)) != true) {
+			printf ("$$ Warnning: No link on port %d \n",
+				port_num);
+			return 0;
+		} else {
+			eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+			if (!(phy_reg_data & 0x20)) {
+				printf ("### Error: Phy is not active\n");
+				return 0;
+			}
+		}
+	} else {
+		mv64460_eth_print_phy_status (dev);
+	}
+	port_private->eth_running = MAGIC_ETH_RUNNING;
+	return 1;
+}
+
+
+static int mv64460_eth_free_tx_rings (struct eth_device *dev)
+{
+	unsigned int queue;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+	volatile ETH_TX_DESC *p_tx_curr_desc;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Stop Tx Queues */
+	MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
+		      0x0000ff00);
+
+	/* Free TX rings */
+	DP (printf ("Clearing previously allocated TX queues... "));
+	for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
+		/* Free on TX rings */
+		for (p_tx_curr_desc =
+		     ethernet_private->p_tx_desc_area_base[queue];
+		     ((unsigned int) p_tx_curr_desc <= (unsigned int)
+		      ethernet_private->p_tx_desc_area_base[queue] +
+		      ethernet_private->tx_desc_area_size[queue]);
+		     p_tx_curr_desc =
+		     (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
+				      TX_DESC_ALIGNED_SIZE)) {
+			/* this is inside for loop */
+			if (p_tx_curr_desc->return_info != 0) {
+				p_tx_curr_desc->return_info = 0;
+				DP (printf ("freed\n"));
+			}
+		}
+		DP (printf ("Done\n"));
+	}
+	return 0;
+}
+
+static int mv64460_eth_free_rx_rings (struct eth_device *dev)
+{
+	unsigned int queue;
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+	volatile ETH_RX_DESC *p_rx_curr_desc;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+
+	/* Stop RX Queues */
+	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+		      0x0000ff00);
+
+	/* Free RX rings */
+	DP (printf ("Clearing previously allocated RX queues... "));
+	for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
+		/* Free preallocated skb's on RX rings */
+		for (p_rx_curr_desc =
+		     ethernet_private->p_rx_desc_area_base[queue];
+		     (((unsigned int) p_rx_curr_desc <
+		       ((unsigned int) ethernet_private->
+			p_rx_desc_area_base[queue] +
+			ethernet_private->rx_desc_area_size[queue])));
+		     p_rx_curr_desc =
+		     (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
+				      RX_DESC_ALIGNED_SIZE)) {
+			if (p_rx_curr_desc->return_info != 0) {
+				p_rx_curr_desc->return_info = 0;
+				DP (printf ("freed\n"));
+			}
+		}
+		DP (printf ("Done\n"));
+	}
+	return 0;
+}
+
+/**********************************************************************
+ * mv64460_eth_stop
+ *
+ * This function is used when closing the network device.
+ * It updates the hardware,
+ * release all memory that holds buffers and descriptors and release the IRQ.
+ * Input : a pointer to the device structure
+ * Output : zero if success , nonzero if fails
+ *********************************************************************/
+
+int mv64460_eth_stop (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	/* Disable all gigE address decoder */
+	MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
+	DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
+	mv64460_eth_real_stop (dev);
+
+	return 0;
+};
+
+/* Helper function for mv64460_eth_stop */
+
+static int mv64460_eth_real_stop (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+
+	mv64460_eth_free_tx_rings (dev);
+	mv64460_eth_free_rx_rings (dev);
+
+	eth_port_reset (ethernet_private->port_num);
+	/* Disable ethernet port interrupts */
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+	/* Mask RX buffer and TX end interrupt */
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0);
+	/* Mask phy and link status changes interrupts */
+	MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
+	MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH,
+			   BIT0 << port_num);
+	/* Print Network statistics */
+#ifndef  UPDATE_STATS_BY_SOFTWARE
+	/*
+	 * Print statistics (only if ethernet is running),
+	 * then zero all the stats fields in memory
+	 */
+	if (port_private->eth_running == MAGIC_ETH_RUNNING) {
+		port_private->eth_running = 0;
+		mv64460_eth_print_stat (dev);
+	}
+	memset (port_private->stats, 0, sizeof (struct net_device_stats));
+#endif
+	DP (printf ("\nEthernet stopped ... \n"));
+	return 0;
+}
+
+
+/**********************************************************************
+ * mv64460_eth_start_xmit
+ *
+ * This function is queues a packet in the Tx descriptor for
+ * required port.
+ *
+ * Input : skb - a pointer to socket buffer
+ *         dev - a pointer to the required port
+ *
+ * Output : zero upon success
+ **********************************************************************/
+
+int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
+		      int dataSize)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+	PKT_INFO pkt_info;
+	ETH_FUNC_RET_STATUS status;
+	struct net_device_stats *stats;
+	ETH_FUNC_RET_STATUS release_result;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	stats = port_private->stats;
+
+	/* Update packet info data structure */
+	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
+	pkt_info.byte_cnt = dataSize;
+	pkt_info.buf_ptr = (unsigned int) dataPtr;
+
+	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
+	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
+		printf ("Error on transmitting packet ..");
+		if (status == ETH_QUEUE_FULL)
+			printf ("ETH Queue is full. \n");
+		if (status == ETH_QUEUE_LAST_RESOURCE)
+			printf ("ETH Queue: using last available resource. \n");
+		goto error;
+	}
+
+	/* Update statistics and start of transmittion time */
+	stats->tx_bytes += dataSize;
+	stats->tx_packets++;
+
+	/* Check if packet(s) is(are) transmitted correctly (release everything) */
+	do {
+		release_result =
+			eth_tx_return_desc (ethernet_private, ETH_Q0,
+					    &pkt_info);
+		switch (release_result) {
+		case ETH_OK:
+			DP (printf ("descriptor released\n"));
+			if (pkt_info.cmd_sts & BIT0) {
+				printf ("Error in TX\n");
+				stats->tx_errors++;
+
+			}
+			break;
+		case ETH_RETRY:
+			DP (printf ("transmission still in process\n"));
+			break;
+
+		case ETH_ERROR:
+			printf ("routine can not access Tx desc ring\n");
+			break;
+
+		case ETH_END_OF_JOB:
+			DP (printf ("the routine has nothing to release\n"));
+			break;
+		default:	/* should not happen */
+			break;
+		}
+	} while (release_result == ETH_OK);
+
+
+	return 0;		/* success */
+      error:
+	return 1;		/* Failed - higher layers will free the skb */
+}
+
+/**********************************************************************
+ * mv64460_eth_receive
+ *
+ * This function is forward packets that are received from the port's
+ * queues toward kernel core or FastRoute them to another interface.
+ *
+ * Input : dev - a pointer to the required interface
+ *         max - maximum number to receive (0 means unlimted)
+ *
+ * Output : number of served packets
+ **********************************************************************/
+
+int mv64460_eth_receive (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+	PKT_INFO pkt_info;
+	struct net_device_stats *stats;
+
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+	stats = port_private->stats;
+
+	while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
+		ETH_OK)) {
+
+#ifdef DEBUG_MV_ETH
+		if (pkt_info.byte_cnt != 0) {
+			printf ("%s: Received %d byte Packet @ 0x%x\n",
+				__FUNCTION__, pkt_info.byte_cnt,
+				pkt_info.buf_ptr);
+		}
+#endif
+		/* Update statistics. Note byte count includes 4 byte CRC count */
+		stats->rx_packets++;
+		stats->rx_bytes += pkt_info.byte_cnt;
+
+		/*
+		 * In case received a packet without first / last bits on OR the error
+		 * summary bit is on, the packets needs to be dropeed.
+		 */
+		if (((pkt_info.
+		      cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
+		     (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
+		    || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
+			stats->rx_dropped++;
+
+			printf ("Received packet spread on multiple descriptors\n");
+
+			/* Is this caused by an error ? */
+			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
+				stats->rx_errors++;
+			}
+
+			/* free these descriptors again without forwarding them to the higher layers */
+			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
+			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
+
+			if (eth_rx_return_buff
+			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+				printf ("Error while returning the RX Desc to Ring\n");
+			} else {
+				DP (printf ("RX Desc returned to Ring\n"));
+			}
+			/* /free these descriptors again */
+		} else {
+
+/* !!! call higher layer processing */
+#ifdef DEBUG_MV_ETH
+			printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
+#endif
+			/* let the upper layer handle the packet */
+			NetReceive ((uchar *) pkt_info.buf_ptr,
+				    (int) pkt_info.byte_cnt);
+
+/* **************************************************************** */
+/* free descriptor  */
+			pkt_info.buf_ptr &= ~0x7;	/* realign buffer again */
+			pkt_info.byte_cnt = 0x0000;	/* Reset Byte count */
+			DP (printf
+			    ("RX: pkt_info.buf_ptr =	%x\n",
+			     pkt_info.buf_ptr));
+			if (eth_rx_return_buff
+			    (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+				printf ("Error while returning the RX Desc to Ring\n");
+			} else {
+				DP (printf ("RX Desc returned to Ring\n"));
+			}
+
+/* **************************************************************** */
+
+		}
+	}
+	mv64460_eth_get_stats (dev);	/* update statistics */
+	return 1;
+}
+
+/**********************************************************************
+ * mv64460_eth_get_stats
+ *
+ * Returns a pointer to the interface statistics.
+ *
+ * Input : dev - a pointer to the required interface
+ *
+ * Output : a pointer to the interface's statistics
+ **********************************************************************/
+
+static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+
+	mv64460_eth_update_stat (dev);
+
+	return port_private->stats;
+}
+
+
+/**********************************************************************
+ * mv64460_eth_update_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64460_eth_update_stat (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	struct net_device_stats *stats;
+	unsigned int port_num;
+	volatile unsigned int dummy;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+	stats = port_private->stats;
+
+	/* These are false updates */
+	stats->rx_packets += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_FRAMES_RECEIVED);
+	stats->tx_packets += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_FRAMES_SENT);
+	stats->rx_bytes += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
+	/*
+	 * Ideally this should be as follows -
+	 *
+	 *   stats->rx_bytes   += stats->rx_bytes +
+	 * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
+	 * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
+	 *
+	 * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
+	 * is just a dummy read for proper work of the GigE port
+	 */
+	dummy = eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
+	stats->tx_bytes += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_SENT_LOW);
+	dummy = eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_GOOD_OCTETS_SENT_HIGH);
+	stats->rx_errors += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_MAC_RECEIVE_ERROR);
+
+	/* Rx dropped is for received packet with CRC error */
+	stats->rx_dropped +=
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_BAD_CRC_EVENT);
+	stats->multicast += (unsigned long)
+		eth_read_mib_counter (ethernet_private->port_num,
+				      ETH_MIB_MULTICAST_FRAMES_RECEIVED);
+	stats->collisions +=
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_COLLISION) +
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_LATE_COLLISION);
+	/* detailed rx errors */
+	stats->rx_length_errors +=
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_UNDERSIZE_RECEIVED)
+		+
+		(unsigned long) eth_read_mib_counter (ethernet_private->
+						      port_num,
+						      ETH_MIB_OVERSIZE_RECEIVED);
+	/* detailed tx errors */
+}
+
+#ifndef  UPDATE_STATS_BY_SOFTWARE
+/**********************************************************************
+ * mv64460_eth_print_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64460_eth_print_stat (struct eth_device *dev)
+{
+	ETH_PORT_INFO *ethernet_private;
+	struct mv64460_eth_priv *port_private;
+	struct net_device_stats *stats;
+	unsigned int port_num;
+
+	ethernet_private = (ETH_PORT_INFO *) dev->priv;
+	port_private =
+		(struct mv64460_eth_priv *) ethernet_private->port_private;
+	port_num = port_private->port_num;
+	stats = port_private->stats;
+
+	/* These are false updates */
+	printf ("\n### Network statistics: ###\n");
+	printf ("--------------------------\n");
+	printf (" Packets received:		%ld\n", stats->rx_packets);
+	printf (" Packets send:			%ld\n", stats->tx_packets);
+	printf (" Received bytes:		%ld\n", stats->rx_bytes);
+	printf (" Send bytes:			%ld\n", stats->tx_bytes);
+	if (stats->rx_errors != 0)
+		printf (" Rx Errors:			%ld\n",
+			stats->rx_errors);
+	if (stats->rx_dropped != 0)
+		printf (" Rx dropped (CRC Errors):	%ld\n",
+			stats->rx_dropped);
+	if (stats->multicast != 0)
+		printf (" Rx mulicast frames:		%ld\n",
+			stats->multicast);
+	if (stats->collisions != 0)
+		printf (" No. of collisions:		%ld\n",
+			stats->collisions);
+	if (stats->rx_length_errors != 0)
+		printf (" Rx length errors:		%ld\n",
+			stats->rx_length_errors);
+}
+#endif
+
+/**************************************************************************
+ *network_start - Network Kick Off Routine UBoot
+ *Inputs :
+ *Outputs :
+ **************************************************************************/
+
+bool db64460_eth_start (struct eth_device *dev)
+{
+	return (mv64460_eth_open (dev));	/* calls real open */
+}
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The second part is the low level driver of the gigE ethernet ports.   *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+/*
+ * based on Linux code
+ * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+/********************************************************************************
+ * Marvell's Gigabit Ethernet controller low level driver
+ *
+ * DESCRIPTION:
+ *       This file introduce low level API to Marvell's Gigabit Ethernet
+ *		controller. This Gigabit Ethernet Controller driver API controls
+ *		1) Operations (i.e. port init, start, reset etc').
+ *		2) Data flow (i.e. port send, receive etc').
+ *		Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
+ *		struct.
+ *		This struct includes user configuration information as well as
+ *		driver internal data needed for its operations.
+ *
+ *		Supported Features:
+ *		- This low level driver is OS independent. Allocating memory for
+ *		  the descriptor rings and buffers are not within the scope of
+ *		  this driver.
+ *		- The user is free from Rx/Tx queue managing.
+ *		- This low level driver introduce functionality API that enable
+ *		  the to operate Marvell's Gigabit Ethernet Controller in a
+ *		  convenient way.
+ *		- Simple Gigabit Ethernet port operation API.
+ *		- Simple Gigabit Ethernet port data flow API.
+ *		- Data flow and operation API support per queue functionality.
+ *		- Support cached descriptors for better performance.
+ *		- Enable access to all four DRAM banks and internal SRAM memory
+ *		  spaces.
+ *		- PHY access and control API.
+ *		- Port control register configuration API.
+ *		- Full control over Unicast and Multicast MAC configurations.
+ *
+ *		Operation flow:
+ *
+ *		Initialization phase
+ *		This phase complete the initialization of the ETH_PORT_INFO
+ *		struct.
+ *		User information regarding port configuration has to be set
+ *		prior to calling the port initialization routine. For example,
+ *		the user has to assign the port_phy_addr field which is board
+ *		depended parameter.
+ *		In this phase any port Tx/Rx activity is halted, MIB counters
+ *		are cleared, PHY address is set according to user parameter and
+ *		access to DRAM and internal SRAM memory spaces.
+ *
+ *		Driver ring initialization
+ *		Allocating memory for the descriptor rings and buffers is not
+ *		within the scope of this driver. Thus, the user is required to
+ *		allocate memory for the descriptors ring and buffers. Those
+ *		memory parameters are used by the Rx and Tx ring initialization
+ *		routines in order to curve the descriptor linked list in a form
+ *		of a ring.
+ *		Note: Pay special attention to alignment issues when using
+ *		cached descriptors/buffers. In this phase the driver store
+ *		information in the ETH_PORT_INFO struct regarding each queue
+ *		ring.
+ *
+ *		Driver start
+ *		This phase prepares the Ethernet port for Rx and Tx activity.
+ *		It uses the information stored in the ETH_PORT_INFO struct to
+ *		initialize the various port registers.
+ *
+ *		Data flow:
+ *		All packet references to/from the driver are done using PKT_INFO
+ *		struct.
+ *		This struct is a unified struct used with Rx and Tx operations.
+ *		This way the user is not required to be familiar with neither
+ *		Tx nor Rx descriptors structures.
+ *		The driver's descriptors rings are management by indexes.
+ *		Those indexes controls the ring resources and used to indicate
+ *		a SW resource error:
+ *		'current'
+ *		This index points to the current available resource for use. For
+ *		example in Rx process this index will point to the descriptor
+ *		that will be passed to the user upon calling the receive routine.
+ *		In Tx process, this index will point to the descriptor
+ *		that will be assigned with the user packet info and transmitted.
+ *		'used'
+ *		This index points to the descriptor that need to restore its
+ *		resources. For example in Rx process, using the Rx buffer return
+ *		API will attach the buffer returned in packet info to the
+ *		descriptor pointed by 'used'. In Tx process, using the Tx
+ *		descriptor return will merely return the user packet info with
+ *		the command status of  the transmitted buffer pointed by the
+ *		'used' index. Nevertheless, it is essential to use this routine
+ *		to update the 'used' index.
+ *		'first'
+ *		This index supports Tx Scatter-Gather. It points to the first
+ *		descriptor of a packet assembled of multiple buffers. For example
+ *		when in middle of Such packet we have a Tx resource error the
+ *		'curr' index get the value of 'first' to indicate that the ring
+ *		returned to its state before trying to transmit this packet.
+ *
+ *		Receive operation:
+ *		The eth_port_receive API set the packet information struct,
+ *		passed by the caller, with received information from the
+ *		'current' SDMA descriptor.
+ *		It is the user responsibility to return this resource back
+ *		to the Rx descriptor ring to enable the reuse of this source.
+ *		Return Rx resource is done using the eth_rx_return_buff API.
+ *
+ *		Transmit operation:
+ *		The eth_port_send API supports Scatter-Gather which enables to
+ *		send a packet spanned over multiple buffers. This means that
+ *		for each packet info structure given by the user and put into
+ *		the Tx descriptors ring, will be transmitted only if the 'LAST'
+ *		bit will be set in the packet info command status field. This
+ *		API also consider restriction regarding buffer alignments and
+ *		sizes.
+ *		The user must return a Tx resource after ensuring the buffer
+ *		has been transmitted to enable the Tx ring indexes to update.
+ *
+ *		BOARD LAYOUT
+ *		This device is on-board.  No jumper diagram is necessary.
+ *
+ *		EXTERNAL INTERFACE
+ *
+ *       Prior to calling the initialization routine eth_port_init() the user
+ *	 must set the following fields under ETH_PORT_INFO struct:
+ *       port_num             User Ethernet port number.
+ *       port_phy_addr		    User PHY address of Ethernet port.
+ *       port_mac_addr[6]	    User defined port MAC address.
+ *       port_config          User port configuration value.
+ *       port_config_extend    User port config extend value.
+ *       port_sdma_config      User port SDMA config value.
+ *       port_serial_control   User port serial control value.
+ *       *port_virt_to_phys ()  User function to cast virtual addr to CPU bus addr.
+ *       *port_private        User scratch pad for user specific data structures.
+ *
+ *       This driver introduce a set of default values:
+ *       PORT_CONFIG_VALUE           Default port configuration value
+ *       PORT_CONFIG_EXTEND_VALUE    Default port extend configuration value
+ *       PORT_SDMA_CONFIG_VALUE      Default sdma control value
+ *       PORT_SERIAL_CONTROL_VALUE   Default port serial control value
+ *
+ *		This driver data flow is done using the PKT_INFO struct which is
+ *		a unified struct for Rx and Tx operations:
+ *		byte_cnt	Tx/Rx descriptor buffer byte count.
+ *		l4i_chk		CPU provided TCP Checksum. For Tx operation only.
+ *		cmd_sts		Tx/Rx descriptor command status.
+ *		buf_ptr		Tx/Rx descriptor buffer pointer.
+ *		return_info	Tx/Rx user resource return information.
+ *
+ *
+ *		EXTERNAL SUPPORT REQUIREMENTS
+ *
+ *		This driver requires the following external support:
+ *
+ *		D_CACHE_FLUSH_LINE (address, address offset)
+ *
+ *		This macro applies assembly code to flush and invalidate cache
+ *		line.
+ *		address        - address base.
+ *		address offset - address offset
+ *
+ *
+ *		CPU_PIPE_FLUSH
+ *
+ *		This macro applies assembly code to flush the CPU pipeline.
+ *
+ *******************************************************************************/
+/* includes */
+
+/* defines */
+/* SDMA command macros */
+#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
+
+#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
+ (1 << (8 + tx_queue)))
+
+#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
+
+#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
+
+#define CURR_RFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
+
+#define CURR_RFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_RFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
+
+#define USED_RFD_SET(p_used_desc, queue)\
+(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
+
+
+#define CURR_TFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
+
+#define CURR_TFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_TFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
+
+#define USED_TFD_SET(p_used_desc, queue) \
+ (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
+
+#define FIRST_TFD_GET(p_first_desc, queue) \
+ ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
+
+#define FIRST_TFD_SET(p_first_desc, queue) \
+ (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
+
+
+/* Macros that save access to desc in order to find next desc pointer  */
+#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
+
+#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
+
+#define LINK_UP_TIMEOUT		100000
+#define PHY_BUSY_TIMEOUT    10000000
+
+/* locals */
+
+/* PHY routines */
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
+static int ethernet_phy_get (ETH_PORT eth_port_num);
+
+/* Ethernet Port routines */
+static void eth_set_access_control (ETH_PORT eth_port_num,
+				    ETH_WIN_PARAM * param);
+static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
+			      ETH_QUEUE queue, int option);
+#if 0				/* FIXME */
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+			       unsigned char mc_byte,
+			       ETH_QUEUE queue, int option);
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+			       unsigned char crc8,
+			       ETH_QUEUE queue, int option);
+#endif
+
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+			int byte_count);
+
+void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
+
+
+typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
+u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
+{
+	u32 result = 0;
+	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
+
+	if (enable & (1 << bank))
+		return 0;
+	if (bank == BANK0)
+		result = MV_REG_READ (MV64460_CS_0_BASE_ADDR);
+	if (bank == BANK1)
+		result = MV_REG_READ (MV64460_CS_1_BASE_ADDR);
+	if (bank == BANK2)
+		result = MV_REG_READ (MV64460_CS_2_BASE_ADDR);
+	if (bank == BANK3)
+		result = MV_REG_READ (MV64460_CS_3_BASE_ADDR);
+	result &= 0x0000ffff;
+	result = result << 16;
+	return result;
+}
+
+u32 mv_get_dram_bank_size (MEMORY_BANK bank)
+{
+	u32 result = 0;
+	u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
+
+	if (enable & (1 << bank))
+		return 0;
+	if (bank == BANK0)
+		result = MV_REG_READ (MV64460_CS_0_SIZE);
+	if (bank == BANK1)
+		result = MV_REG_READ (MV64460_CS_1_SIZE);
+	if (bank == BANK2)
+		result = MV_REG_READ (MV64460_CS_2_SIZE);
+	if (bank == BANK3)
+		result = MV_REG_READ (MV64460_CS_3_SIZE);
+	result += 1;
+	result &= 0x0000ffff;
+	result = result << 16;
+	return result;
+}
+
+u32 mv_get_internal_sram_base (void)
+{
+	u32 result;
+
+	result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR);
+	result &= 0x0000ffff;
+	result = result << 16;
+	return result;
+}
+
+/*******************************************************************************
+* eth_port_init - Initialize the Ethernet port driver
+*
+* DESCRIPTION:
+*       This function prepares the ethernet port to start its activity:
+*       1) Completes the ethernet port driver struct initialization toward port
+*           start routine.
+*       2) Resets the device to a quiescent state in case of warm reboot.
+*       3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
+*       4) Clean MAC tables. The reset status of those tables is unknown.
+*       5) Set PHY address.
+*       Note: Call this routine prior to eth_port_start routine and after setting
+*       user values in the user fields of Ethernet port control struct (i.e.
+*       port_phy_addr).
+*
+* INPUT:
+*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
+*
+* OUTPUT:
+*       See description.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+	int queue;
+	ETH_WIN_PARAM win_param;
+
+	p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
+	p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
+	p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
+	p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
+
+	p_eth_port_ctrl->port_rx_queue_command = 0;
+	p_eth_port_ctrl->port_tx_queue_command = 0;
+
+	/* Zero out SW structs */
+	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+		CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+		USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+		p_eth_port_ctrl->rx_resource_err[queue] = false;
+	}
+
+	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+		CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+		USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+		FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+		p_eth_port_ctrl->tx_resource_err[queue] = false;
+	}
+
+	eth_port_reset (p_eth_port_ctrl->port_num);
+
+	/* Set access parameters for DRAM bank 0 */
+	win_param.win = ETH_WIN0;	/* Use Ethernet window 0 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR  */
+	win_param.attributes = EBAR_ATTR_DRAM_CS0;	/* Enable DRAM bank   */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
+	win_param.size = mv_get_dram_bank_size (BANK0);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for DRAM bank 1 */
+	win_param.win = ETH_WIN1;	/* Use Ethernet window 1 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
+	win_param.attributes = EBAR_ATTR_DRAM_CS1;	/* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
+	win_param.size = mv_get_dram_bank_size (BANK1);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for DRAM bank 2 */
+	win_param.win = ETH_WIN2;	/* Use Ethernet window 2 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
+	win_param.attributes = EBAR_ATTR_DRAM_CS2;	/* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
+	win_param.size = mv_get_dram_bank_size (BANK2);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for DRAM bank 3 */
+	win_param.win = ETH_WIN3;	/* Use Ethernet window 3 */
+	win_param.target = ETH_TARGET_DRAM;	/* Window target - DDR */
+	win_param.attributes = EBAR_ATTR_DRAM_CS3;	/* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+	win_param.high_addr = 0;
+	/* Get bank base */
+	win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
+	win_param.size = mv_get_dram_bank_size (BANK3);	/* Get bank size */
+	if (win_param.size == 0)
+		win_param.enable = 0;
+	else
+		win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	/* Set access parameters for Internal SRAM */
+	win_param.win = ETH_WIN4;	/* Use Ethernet window 0 */
+	win_param.target = EBAR_TARGET_CBS;	/* Target - Internal SRAM */
+	win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
+	win_param.high_addr = 0;
+	win_param.base_addr = mv_get_internal_sram_base ();	/* Get base addr */
+	win_param.size = MV64460_INTERNAL_SRAM_SIZE;	/* Get bank size */
+	win_param.enable = 1;	/* Enable the access */
+	win_param.access_ctrl = EWIN_ACCESS_FULL;	/* Enable full access */
+
+	/* Set the access control for address window (EPAPR) READ & WRITE */
+	eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+	eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
+
+	ethernet_phy_set (p_eth_port_ctrl->port_num,
+			  p_eth_port_ctrl->port_phy_addr);
+
+	return;
+
+}
+
+/*******************************************************************************
+* eth_port_start - Start the Ethernet port activity.
+*
+* DESCRIPTION:
+*       This routine prepares the Ethernet port for Rx and Tx activity:
+*       1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
+*           has been initialized a descriptor's ring (using ether_init_tx_desc_ring
+*           for Tx and ether_init_rx_desc_ring for Rx)
+*       2. Initialize and enable the Ethernet configuration port by writing to
+*           the port's configuration and command registers.
+*       3. Initialize and enable the SDMA by writing to the SDMA's
+*    configuration and command registers.
+*       After completing these steps, the ethernet port SDMA can starts to
+*       perform Rx and Tx activities.
+*
+*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
+*       to calling this function (use ether_init_tx_desc_ring for Tx queues and
+*       ether_init_rx_desc_ring for Rx queues).
+*
+* INPUT:
+*       ETH_PORT_INFO 	*p_eth_port_ctrl       Ethernet port control struct
+*
+* OUTPUT:
+*       Ethernet port is ready to receive and transmit.
+*
+* RETURN:
+*       false if the port PHY is not up.
+*       true otherwise.
+*
+*******************************************************************************/
+static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+	int queue;
+	volatile ETH_TX_DESC *p_tx_curr_desc;
+	volatile ETH_RX_DESC *p_rx_curr_desc;
+	unsigned int phy_reg_data;
+	ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
+
+
+	/* Assignment of Tx CTRP of given queue */
+	for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+		CURR_TFD_GET (p_tx_curr_desc, queue);
+		MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
+			       (eth_port_num)
+			       + (4 * queue)),
+			      ((unsigned int) p_tx_curr_desc));
+
+	}
+
+	/* Assignment of Rx CRDP of given queue */
+	for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+		CURR_RFD_GET (p_rx_curr_desc, queue);
+		MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
+			       (eth_port_num)
+			       + (4 * queue)),
+			      ((unsigned int) p_rx_curr_desc));
+
+		if (p_rx_curr_desc != NULL)
+			/* Add the assigned Ethernet address to the port's address table */
+			eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
+					      p_eth_port_ctrl->port_mac_addr,
+					      queue);
+	}
+
+	/* Assign port configuration and command. */
+	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
+		      p_eth_port_ctrl->port_config);
+
+	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+		      p_eth_port_ctrl->port_config_extend);
+
+	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+		      p_eth_port_ctrl->port_serial_control);
+
+	MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+			 ETH_SERIAL_PORT_ENABLE);
+
+	/* Assign port SDMA configuration */
+	MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
+		      p_eth_port_ctrl->port_sdma_config);
+
+	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
+		      (eth_port_num), 0x3fffffff);
+	MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
+		      (eth_port_num), 0x03fffcff);
+	/* Turn off the port/queue bandwidth limitation */
+	MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
+
+	/* Enable port Rx. */
+	MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
+		      p_eth_port_ctrl->port_rx_queue_command);
+
+	/* Check if link is up */
+	eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+	if (!(phy_reg_data & 0x20))
+		return false;
+
+	return true;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr_set - This function Set the port Unicast address.
+*
+* DESCRIPTION:
+*		This function Set the port Ethernet MAC address.
+*
+* INPUT:
+*	ETH_PORT eth_port_num     Port number.
+*	char *        p_addr		Address to be set
+*	ETH_QUEUE 	  queue		Rx queue number for this MAC address.
+*
+* OUTPUT:
+*	Set MAC address low and high registers. also calls eth_port_uc_addr()
+*       To set the unicast table with the proper information.
+*
+* RETURN:
+*	N/A.
+*
+*******************************************************************************/
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+				  unsigned char *p_addr, ETH_QUEUE queue)
+{
+	unsigned int mac_h;
+	unsigned int mac_l;
+
+	mac_l = (p_addr[4] << 8) | (p_addr[5]);
+	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
+		(p_addr[2] << 8) | (p_addr[3] << 0);
+
+	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
+	MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
+
+	/* Accept frames of this address */
+	eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
+
+	return;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr - This function Set the port unicast address table
+*
+* DESCRIPTION:
+*	This function locates the proper entry in the Unicast table for the
+*	specified MAC nibble and sets its properties according to function
+*	parameters.
+*
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char uc_nibble		Unicast MAC Address last nibble.
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	This function add/removes MAC addresses from the port unicast address
+*	table.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_uc_addr (ETH_PORT eth_port_num,
+			      unsigned char uc_nibble,
+			      ETH_QUEUE queue, int option)
+{
+	unsigned int unicast_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the Unicast table entry */
+	uc_nibble = (0xf & uc_nibble);
+	tbl_offset = (uc_nibble / 4) * 4;	/* Register offset from unicast table base */
+	reg_offset = uc_nibble % 4;	/* Entry offset within the above register */
+
+	switch (option) {
+	case REJECT_MAC_ADDR:
+		/* Clear accepts frame bit at specified unicast DA table entry */
+		unicast_reg =
+			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+				      (eth_port_num)
+				      + tbl_offset));
+
+		unicast_reg &= (0x0E << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+			       (eth_port_num)
+			       + tbl_offset), unicast_reg);
+		break;
+
+	case ACCEPT_MAC_ADDR:
+		/* Set accepts frame bit at unicast DA filter table entry */
+		unicast_reg =
+			MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+				      (eth_port_num)
+				      + tbl_offset));
+
+		unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+			       (eth_port_num)
+			       + tbl_offset), unicast_reg);
+
+		break;
+
+	default:
+		return false;
+	}
+	return true;
+}
+
+#if 0				/* FIXME */
+/*******************************************************************************
+* eth_port_mc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+*	This API controls the MV device MAC multicast support.
+*	The MV device supports multicast using two tables:
+*	1) Special Multicast Table for MAC addresses of the form
+*	   0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+*	   The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+*	   Table entries in the DA-Filter table.
+*	   In this case, the function calls eth_port_smc_addr() routine to set the
+*	   Special Multicast Table.
+*	2) Other Multicast Table for multicast of another type. A CRC-8bit
+*	   is used as an index to the Other Multicast Table entries in the
+*	   DA-Filter table.
+*	   In this case, the function calculates the CRC-8bit value and calls
+*	   eth_port_omc_addr() routine to set the Other Multicast Table.
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char 	*p_addr		Unicast MAC Address.
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	See description.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if add_address_table_entry( ) failed.
+*
+*******************************************************************************/
+static void eth_port_mc_addr (ETH_PORT eth_port_num,
+			      unsigned char *p_addr,
+			      ETH_QUEUE queue, int option)
+{
+	unsigned int mac_h;
+	unsigned int mac_l;
+	unsigned char crc_result = 0;
+	int mac_array[48];
+	int crc[8];
+	int i;
+
+
+	if ((p_addr[0] == 0x01) &&
+	    (p_addr[1] == 0x00) &&
+	    (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00))
+
+		eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
+	else {
+		/* Calculate CRC-8 out of the given address */
+		mac_h = (p_addr[0] << 8) | (p_addr[1]);
+		mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
+			(p_addr[4] << 8) | (p_addr[5] << 0);
+
+		for (i = 0; i < 32; i++)
+			mac_array[i] = (mac_l >> i) & 0x1;
+		for (i = 32; i < 48; i++)
+			mac_array[i] = (mac_h >> (i - 32)) & 0x1;
+
+
+		crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
+			mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
+			mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
+			mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
+			mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
+			mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
+			mac_array[6] ^ mac_array[0];
+
+		crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+			mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
+			mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
+			mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
+			mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
+			mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
+			mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
+			mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
+			mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
+			mac_array[0];
+
+		crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
+			mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
+			mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
+			mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
+			mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
+			mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
+			mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
+			mac_array[2] ^ mac_array[1] ^ mac_array[0];
+
+		crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
+			mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
+			mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
+			mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
+			mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
+			mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
+			mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
+			mac_array[2] ^ mac_array[1];
+
+		crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+			mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
+			mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
+			mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
+			mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
+			mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+			mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
+			mac_array[2];
+
+		crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
+			mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
+			mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
+			mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
+			mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
+			mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
+			mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
+			mac_array[3];
+
+		crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
+			mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
+			mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
+			mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
+			mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
+			mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+			mac_array[6] ^ mac_array[5] ^ mac_array[4];
+
+		crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
+			mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
+			mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
+			mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
+			mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
+			mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
+			mac_array[6] ^ mac_array[5];
+
+		for (i = 0; i < 8; i++)
+			crc_result = crc_result | (crc[i] << i);
+
+		eth_port_omc_addr (eth_port_num, crc_result, queue, option);
+	}
+	return;
+}
+
+/*******************************************************************************
+* eth_port_smc_addr - Special Multicast address settings.
+*
+* DESCRIPTION:
+*	This routine controls the MV device special MAC multicast support.
+*	The Special Multicast Table for MAC addresses supports MAC of the form
+*	0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+*	The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+*	Table entries in the DA-Filter table.
+*	This function set the Special Multicast Table appropriate entry
+*	according to the argument given.
+*
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char 	mc_byte		Multicast addr last byte (MAC DA[7:0] bits).
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	See description.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+			       unsigned char mc_byte,
+			       ETH_QUEUE queue, int option)
+{
+	unsigned int smc_table_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the SMC table entry */
+	tbl_offset = (mc_byte / 4) * 4;	/* Register offset from SMC table base */
+	reg_offset = mc_byte % 4;	/* Entry offset within the above register */
+	queue &= 0x7;
+
+	switch (option) {
+	case REJECT_MAC_ADDR:
+		/* Clear accepts frame bit at specified Special DA table entry */
+		smc_table_reg =
+			MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		smc_table_reg &= (0x0E << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+		break;
+
+	case ACCEPT_MAC_ADDR:
+		/* Set accepts frame bit at specified Special DA table entry */
+		smc_table_reg =
+			MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+		break;
+
+	default:
+		return false;
+	}
+	return true;
+}
+
+/*******************************************************************************
+* eth_port_omc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+*	This routine controls the MV device Other MAC multicast support.
+*	The Other Multicast Table is used for multicast of another type.
+*	A CRC-8bit is used as an index to the Other Multicast Table entries
+*	in the DA-Filter table.
+*	The function gets the CRC-8bit value from the calling routine and
+*      set the Other Multicast Table appropriate entry according to the
+*	CRC-8 argument given.
+*
+* INPUT:
+*	ETH_PORT 	eth_port_num      Port number.
+*	unsigned char 	  crc8		A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+*	ETH_QUEUE 		 queue		Rx queue number for this MAC address.
+*	int 			option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*	See description.
+*
+* RETURN:
+*	true is output succeeded.
+*	false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+			       unsigned char crc8,
+			       ETH_QUEUE queue, int option)
+{
+	unsigned int omc_table_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the OMC table entry */
+	tbl_offset = (crc8 / 4) * 4;	/* Register offset from OMC table base */
+	reg_offset = crc8 % 4;	/* Entry offset within the above register */
+	queue &= 0x7;
+
+	switch (option) {
+	case REJECT_MAC_ADDR:
+		/* Clear accepts frame bit at specified Other DA table entry */
+		omc_table_reg =
+			MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		omc_table_reg &= (0x0E << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+		break;
+
+	case ACCEPT_MAC_ADDR:
+		/* Set accepts frame bit at specified Other DA table entry */
+		omc_table_reg =
+			MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+		omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+		break;
+
+	default:
+		return false;
+	}
+	return true;
+}
+#endif
+
+/*******************************************************************************
+* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
+*
+* DESCRIPTION:
+*       Go through all the DA filter tables (Unicast, Special Multicast & Other
+*       Multicast) and set each entry to 0.
+*
+* INPUT:
+*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+*       Multicast and Unicast packets are rejected.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
+{
+	int table_index;
+
+	/* Clear DA filter unicast table (Ex_dFUT) */
+	for (table_index = 0; table_index <= 0xC; table_index += 4)
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+			       (eth_port_num) + table_index), 0);
+
+	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
+		/* Clear DA filter special multicast table (Ex_dFSMT) */
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+		/* Clear DA filter other multicast table (Ex_dFOMT) */
+		MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+	}
+}
+
+/*******************************************************************************
+* eth_clear_mib_counters - Clear all MIB counters
+*
+* DESCRIPTION:
+*       This function clears all MIB counters of a specific ethernet port.
+*       A read from the MIB counter will reset the counter.
+*
+* INPUT:
+*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+*       After reading all MIB counters, the counters resets.
+*
+* RETURN:
+*       MIB counter value.
+*
+*******************************************************************************/
+static void eth_clear_mib_counters (ETH_PORT eth_port_num)
+{
+	int i;
+	unsigned int dummy;
+
+	/* Perform dummy reads from MIB counters */
+	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
+	     i += 4)
+		dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE
+				      (eth_port_num) + i));
+
+	return;
+}
+
+/*******************************************************************************
+* eth_read_mib_counter - Read a MIB counter
+*
+* DESCRIPTION:
+*       This function reads a MIB counter of a specific ethernet port.
+*       NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
+*       following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
+*       register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
+*       ETH_MIB_GOOD_OCTETS_SENT_HIGH
+*
+* INPUT:
+*	ETH_PORT    eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*       unsigned int mib_offset   MIB counter offset (use ETH_MIB_... macros).
+*
+* OUTPUT:
+*       After reading the MIB counter, the counter resets.
+*
+* RETURN:
+*       MIB counter value.
+*
+*******************************************************************************/
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+				   unsigned int mib_offset)
+{
+	return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num)
+			     + mib_offset));
+}
+
+/*******************************************************************************
+* ethernet_phy_set - Set the ethernet port PHY address.
+*
+* DESCRIPTION:
+*       This routine set the ethernet port PHY address according to given
+*       parameter.
+*
+* INPUT:
+*		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+*       Set PHY Address Register with given PHY address parameter.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
+{
+	unsigned int reg_data;
+
+	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
+
+	reg_data &= ~(0x1F << (5 * eth_port_num));
+	reg_data |= (phy_addr << (5 * eth_port_num));
+
+	MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data);
+
+	return;
+}
+
+/*******************************************************************************
+ * ethernet_phy_get - Get the ethernet port PHY address.
+ *
+ * DESCRIPTION:
+ *       This routine returns the given ethernet port PHY address.
+ *
+ * INPUT:
+ *		ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       PHY address.
+ *
+ *******************************************************************************/
+static int ethernet_phy_get (ETH_PORT eth_port_num)
+{
+	unsigned int reg_data;
+
+	reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
+
+	return ((reg_data >> (5 * eth_port_num)) & 0x1f);
+}
+
+/*******************************************************************************
+ * ethernet_phy_reset - Reset Ethernet port PHY.
+ *
+ * DESCRIPTION:
+ *       This routine utilize the SMI interface to reset the ethernet port PHY.
+ *       The routine waits until the link is up again or link up is timeout.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       The ethernet port PHY renew its link.
+ *
+ * RETURN:
+ *       None.
+ *
+*******************************************************************************/
+static bool ethernet_phy_reset (ETH_PORT eth_port_num)
+{
+	unsigned int time_out = 50;
+	unsigned int phy_reg_data;
+
+	/* Reset the PHY */
+	eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
+	phy_reg_data |= 0x8000;	/* Set bit 15 to reset the PHY */
+	eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
+
+	/* Poll on the PHY LINK */
+	do {
+		eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+		if (time_out-- == 0)
+			return false;
+	}
+	while (!(phy_reg_data & 0x20));
+
+	return true;
+}
+
+/*******************************************************************************
+ * eth_port_reset - Reset Ethernet port
+ *
+ * DESCRIPTION:
+ * 	This routine resets the chip by aborting any SDMA engine activity and
+ *      clearing the MIB counters. The Receiver and the Transmit unit are in
+ *      idle state after this command is performed and the port is disabled.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       Channel activity is halted.
+ *
+ * RETURN:
+ *       None.
+ *
+ *******************************************************************************/
+static void eth_port_reset (ETH_PORT eth_port_num)
+{
+	unsigned int reg_data;
+
+	/* Stop Tx port activity. Check port Tx activity. */
+	reg_data =
+		MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
+			     (eth_port_num));
+
+	if (reg_data & 0xFF) {
+		/* Issue stop command for active channels only */
+		MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
+			      (eth_port_num), (reg_data << 8));
+
+		/* Wait for all Tx activity to terminate. */
+		do {
+			/* Check port cause register that all Tx queues are stopped */
+			reg_data =
+				MV_REG_READ
+				(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
+				 (eth_port_num));
+		}
+		while (reg_data & 0xFF);
+	}
+
+	/* Stop Rx port activity. Check port Rx activity. */
+	reg_data =
+		MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
+			     (eth_port_num));
+
+	if (reg_data & 0xFF) {
+		/* Issue stop command for active channels only */
+		MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
+			      (eth_port_num), (reg_data << 8));
+
+		/* Wait for all Rx activity to terminate. */
+		do {
+			/* Check port cause register that all Rx queues are stopped */
+			reg_data =
+				MV_REG_READ
+				(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
+				 (eth_port_num));
+		}
+		while (reg_data & 0xFF);
+	}
+
+
+	/* Clear all MIB counters */
+	eth_clear_mib_counters (eth_port_num);
+
+	/* Reset the Enable bit in the Configuration Register */
+	reg_data =
+		MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG
+			     (eth_port_num));
+	reg_data &= ~ETH_SERIAL_PORT_ENABLE;
+	MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+		      reg_data);
+
+	return;
+}
+
+#if 0				/* Not needed here */
+/*******************************************************************************
+ * ethernet_set_config_reg - Set specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ *       This function sets specified bits in the given ethernet
+ *       configuration register.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *      unsigned int    value   32 bit value.
+ *
+ * OUTPUT:
+ *      The set bits in the value parameter are set in the configuration
+ *      register.
+ *
+ * RETURN:
+ *      None.
+ *
+ *******************************************************************************/
+static void ethernet_set_config_reg (ETH_PORT eth_port_num,
+				     unsigned int value)
+{
+	unsigned int eth_config_reg;
+
+	eth_config_reg =
+		MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num));
+	eth_config_reg |= value;
+	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
+		      eth_config_reg);
+
+	return;
+}
+#endif
+
+#if 0				/* FIXME */
+/*******************************************************************************
+ * ethernet_reset_config_reg - Reset specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ *       This function resets specified bits in the given Ethernet
+ *       configuration register.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *      unsigned int    value   32 bit value.
+ *
+ * OUTPUT:
+ *      The set bits in the value parameter are reset in the configuration
+ *      register.
+ *
+ * RETURN:
+ *      None.
+ *
+ *******************************************************************************/
+static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
+				       unsigned int value)
+{
+	unsigned int eth_config_reg;
+
+	eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
+				      (eth_port_num));
+	eth_config_reg &= ~value;
+	MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+		      eth_config_reg);
+
+	return;
+}
+#endif
+
+#if 0				/* Not needed here */
+/*******************************************************************************
+ * ethernet_get_config_reg - Get the port configuration register
+ *
+ * DESCRIPTION:
+ *       This function returns the configuration register value of the given
+ *       ethernet port.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ *       None.
+ *
+ * RETURN:
+ *       Port configuration register value.
+ *
+ *******************************************************************************/
+static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
+{
+	unsigned int eth_config_reg;
+
+	eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
+				      (eth_port_num));
+	return eth_config_reg;
+}
+
+#endif
+
+/*******************************************************************************
+ * eth_port_read_smi_reg - Read PHY registers
+ *
+ * DESCRIPTION:
+ *       This routine utilize the SMI interface to interact with the PHY in
+ *       order to perform PHY register read.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *       unsigned int   phy_reg   PHY register address offset.
+ *       unsigned int   *value   Register value buffer.
+ *
+ * OUTPUT:
+ *       Write the value of a specified PHY register into given buffer.
+ *
+ * RETURN:
+ *       false if the PHY is busy or read data is not in valid state.
+ *       true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
+				   unsigned int phy_reg, unsigned int *value)
+{
+	unsigned int reg_value;
+	unsigned int time_out = PHY_BUSY_TIMEOUT;
+	int phy_addr;
+
+	phy_addr = ethernet_phy_get (eth_port_num);
+/*    printf("     Phy-Port %d has addess %d  \n",eth_port_num, phy_addr );*/
+
+	/* first check that it is not busy */
+	do {
+		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+		if (time_out-- == 0) {
+			return false;
+		}
+	}
+	while (reg_value & ETH_SMI_BUSY);
+
+	/* not busy */
+
+	MV_REG_WRITE (MV64460_ETH_SMI_REG,
+		      (phy_addr << 16) | (phy_reg << 21) |
+		      ETH_SMI_OPCODE_READ);
+
+	time_out = PHY_BUSY_TIMEOUT;	/* initialize the time out var again */
+
+	do {
+		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+		if (time_out-- == 0) {
+			return false;
+		}
+	}
+	while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID);	/* Bit set equ operation done */
+
+	/* Wait for the data to update in the SMI register */
+#define PHY_UPDATE_TIMEOUT	10000
+	for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
+
+	reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+
+	*value = reg_value & 0xffff;
+
+	return true;
+}
+
+/*******************************************************************************
+ * eth_port_write_smi_reg - Write to PHY registers
+ *
+ * DESCRIPTION:
+ *       This routine utilize the SMI interface to interact with the PHY in
+ *       order to perform writes to PHY registers.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *      unsigned int   phy_reg   PHY register address offset.
+ *      unsigned int    value   Register value.
+ *
+ * OUTPUT:
+ *      Write the given value to the specified PHY register.
+ *
+ * RETURN:
+ *      false if the PHY is busy.
+ *      true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
+				    unsigned int phy_reg, unsigned int value)
+{
+	unsigned int reg_value;
+	unsigned int time_out = PHY_BUSY_TIMEOUT;
+	int phy_addr;
+
+	phy_addr = ethernet_phy_get (eth_port_num);
+
+	/* first check that it is not busy */
+	do {
+		reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+		if (time_out-- == 0) {
+			return false;
+		}
+	}
+	while (reg_value & ETH_SMI_BUSY);
+
+	/* not busy */
+	MV_REG_WRITE (MV64460_ETH_SMI_REG,
+		      (phy_addr << 16) | (phy_reg << 21) |
+		      ETH_SMI_OPCODE_WRITE | (value & 0xffff));
+	return true;
+}
+
+/*******************************************************************************
+ * eth_set_access_control - Config address decode parameters for Ethernet unit
+ *
+ * DESCRIPTION:
+ *       This function configures the address decode parameters for the Gigabit
+ *       Ethernet Controller according the given parameters struct.
+ *
+ * INPUT:
+ *	ETH_PORT   eth_port_num   Ethernet Port number. See ETH_PORT enum.
+ *       ETH_WIN_PARAM  *param   Address decode parameter struct.
+ *
+ * OUTPUT:
+ *       An access window is opened using the given access parameters.
+ *
+ * RETURN:
+ *       None.
+ *
+ *******************************************************************************/
+static void eth_set_access_control (ETH_PORT eth_port_num,
+				    ETH_WIN_PARAM * param)
+{
+	unsigned int access_prot_reg;
+
+	/* Set access control register */
+	access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG
+				       (eth_port_num));
+	access_prot_reg &= (~(3 << (param->win * 2)));	/* clear window permission */
+	access_prot_reg |= (param->access_ctrl << (param->win * 2));
+	MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num),
+		      access_prot_reg);
+
+	/* Set window Size reg (SR) */
+	MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 +
+		       (ETH_SIZE_REG_GAP * param->win)),
+		      (((param->size / 0x10000) - 1) << 16));
+
+	/* Set window Base address reg (BA) */
+	MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
+		      (param->target | param->attributes | param->base_addr));
+	/* High address remap reg (HARR) */
+	if (param->win < 4)
+		MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 +
+			       (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
+			      param->high_addr);
+
+	/* Base address enable reg (BARER) */
+	if (param->enable == 1)
+		MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
+				   (1 << param->win));
+	else
+		MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
+				 (1 << param->win));
+}
+
+/*******************************************************************************
+ * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ *       This function prepares a Rx chained list of descriptors and packet
+ *       buffers in a form of a ring. The routine must be called after port
+ *       initialization routine and before port start routine.
+ *       The Ethernet SDMA engine uses CPU bus addresses to access the various
+ *       devices in the system (i.e. DRAM). This function uses the ethernet
+ *       struct 'virtual to physical' routine (set by the user) to set the ring
+ *       with physical addresses.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *      int 			rx_desc_num       Number of Rx descriptors
+ *      int 			rx_buff_size      Size of Rx buffer
+ *      unsigned int    rx_desc_base_addr  Rx descriptors memory area base addr.
+ *      unsigned int    rx_buff_base_addr  Rx buffer memory area base addr.
+ *
+ * OUTPUT:
+ *      The routine updates the Ethernet port control struct with information
+ *      regarding the Rx descriptors and buffers.
+ *
+ * RETURN:
+ *      false if the given descriptors memory area is not aligned according to
+ *      Ethernet SDMA specifications.
+ *      true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+				     ETH_QUEUE rx_queue,
+				     int rx_desc_num,
+				     int rx_buff_size,
+				     unsigned int rx_desc_base_addr,
+				     unsigned int rx_buff_base_addr)
+{
+	ETH_RX_DESC *p_rx_desc;
+	ETH_RX_DESC *p_rx_prev_desc;	/* pointer to link with the last descriptor */
+	unsigned int buffer_addr;
+	int ix;			/* a counter */
+
+
+	p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
+	p_rx_prev_desc = p_rx_desc;
+	buffer_addr = rx_buff_base_addr;
+
+	/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+	if (rx_buff_base_addr & 0xF)
+		return false;
+
+	/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
+	if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
+		return false;
+
+	/* Rx buffers must be 64-bit aligned.       */
+	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
+		return false;
+
+	/* initialize the Rx descriptors ring */
+	for (ix = 0; ix < rx_desc_num; ix++) {
+		p_rx_desc->buf_size = rx_buff_size;
+		p_rx_desc->byte_cnt = 0x0000;
+		p_rx_desc->cmd_sts =
+			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+		p_rx_desc->next_desc_ptr =
+			((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
+		p_rx_desc->buf_ptr = buffer_addr;
+		p_rx_desc->return_info = 0x00000000;
+		D_CACHE_FLUSH_LINE (p_rx_desc, 0);
+		buffer_addr += rx_buff_size;
+		p_rx_prev_desc = p_rx_desc;
+		p_rx_desc = (ETH_RX_DESC *)
+			((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
+	}
+
+	/* Closing Rx descriptors ring */
+	p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
+	D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
+
+	/* Save Rx desc pointer to driver struct. */
+	CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+	USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+
+	p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
+		(ETH_RX_DESC *) rx_desc_base_addr;
+	p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
+		rx_desc_num * RX_DESC_ALIGNED_SIZE;
+
+	p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
+
+	return true;
+}
+
+/*******************************************************************************
+ * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ *       This function prepares a Tx chained list of descriptors and packet
+ *       buffers in a form of a ring. The routine must be called after port
+ *       initialization routine and before port start routine.
+ *       The Ethernet SDMA engine uses CPU bus addresses to access the various
+ *       devices in the system (i.e. DRAM). This function uses the ethernet
+ *       struct 'virtual to physical' routine (set by the user) to set the ring
+ *       with physical addresses.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *      int 			tx_desc_num       Number of Tx descriptors
+ *      int 			tx_buff_size      Size of Tx buffer
+ *      unsigned int    tx_desc_base_addr  Tx descriptors memory area base addr.
+ *      unsigned int    tx_buff_base_addr  Tx buffer memory area base addr.
+ *
+ * OUTPUT:
+ *      The routine updates the Ethernet port control struct with information
+ *      regarding the Tx descriptors and buffers.
+ *
+ * RETURN:
+ *      false if the given descriptors memory area is not aligned according to
+ *      Ethernet SDMA specifications.
+ *      true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+				     ETH_QUEUE tx_queue,
+				     int tx_desc_num,
+				     int tx_buff_size,
+				     unsigned int tx_desc_base_addr,
+				     unsigned int tx_buff_base_addr)
+{
+
+	ETH_TX_DESC *p_tx_desc;
+	ETH_TX_DESC *p_tx_prev_desc;
+	unsigned int buffer_addr;
+	int ix;			/* a counter */
+
+
+	/* save the first desc pointer to link with the last descriptor */
+	p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
+	p_tx_prev_desc = p_tx_desc;
+	buffer_addr = tx_buff_base_addr;
+
+	/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+	if (tx_buff_base_addr & 0xF)
+		return false;
+
+	/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes  */
+	if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
+	    || (tx_buff_size < TX_BUFFER_MIN_SIZE))
+		return false;
+
+	/* Initialize the Tx descriptors ring */
+	for (ix = 0; ix < tx_desc_num; ix++) {
+		p_tx_desc->byte_cnt = 0x0000;
+		p_tx_desc->l4i_chk = 0x0000;
+		p_tx_desc->cmd_sts = 0x00000000;
+		p_tx_desc->next_desc_ptr =
+			((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
+
+		p_tx_desc->buf_ptr = buffer_addr;
+		p_tx_desc->return_info = 0x00000000;
+		D_CACHE_FLUSH_LINE (p_tx_desc, 0);
+		buffer_addr += tx_buff_size;
+		p_tx_prev_desc = p_tx_desc;
+		p_tx_desc = (ETH_TX_DESC *)
+			((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
+
+	}
+	/* Closing Tx descriptors ring */
+	p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
+	D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
+	/* Set Tx desc pointer in driver struct. */
+	CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+	USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+
+	/* Init Tx ring base and size parameters */
+	p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
+		(ETH_TX_DESC *) tx_desc_base_addr;
+	p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
+		(tx_desc_num * TX_DESC_ALIGNED_SIZE);
+
+	/* Add the queue to the list of Tx queues of this port */
+	p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
+
+	return true;
+}
+
+/*******************************************************************************
+ * eth_port_send - Send an Ethernet packet
+ *
+ * DESCRIPTION:
+ *	This routine send a given packet described by p_pktinfo parameter. It
+ *      supports transmitting of a packet spaned over multiple buffers. The
+ *      routine updates 'curr' and 'first' indexes according to the packet
+ *      segment passed to the routine. In case the packet segment is first,
+ *      the 'first' index is update. In any case, the 'curr' index is updated.
+ *      If the routine get into Tx resource error it assigns 'curr' index as
+ *      'first'. This way the function can abort Tx process of multiple
+ *      descriptors per packet.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *	PKT_INFO        *p_pkt_info       User packet buffer.
+ *
+ * OUTPUT:
+ *	Tx ring 'curr' and 'first' indexes are updated.
+ *
+ * RETURN:
+ *      ETH_QUEUE_FULL in case of Tx resource error.
+ *	ETH_ERROR in case the routine can not access Tx desc ring.
+ *	ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
+					  ETH_QUEUE tx_queue,
+					  PKT_INFO * p_pkt_info)
+{
+	volatile ETH_TX_DESC *p_tx_desc_first;
+	volatile ETH_TX_DESC *p_tx_desc_curr;
+	volatile ETH_TX_DESC *p_tx_next_desc_curr;
+	volatile ETH_TX_DESC *p_tx_desc_used;
+	unsigned int command_status;
+
+	/* Do not process Tx ring in case of Tx ring resource error */
+	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+		return ETH_QUEUE_FULL;
+
+	/* Get the Tx Desc ring indexes */
+	CURR_TFD_GET (p_tx_desc_curr, tx_queue);
+	USED_TFD_GET (p_tx_desc_used, tx_queue);
+
+	if (p_tx_desc_curr == NULL)
+		return ETH_ERROR;
+
+	/* The following parameters are used to save readings from memory */
+	p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
+	command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
+
+	if (command_status & (ETH_TX_FIRST_DESC)) {
+		/* Update first desc */
+		FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
+		p_tx_desc_first = p_tx_desc_curr;
+	} else {
+		FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+		command_status |= ETH_BUFFER_OWNED_BY_DMA;
+	}
+
+	/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
+	/* boundary. We use the memory allocated for Tx descriptor. This memory  */
+	/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
+	if (p_pkt_info->byte_cnt <= 8) {
+		printf ("You have failed in the < 8 bytes errata - fixme\n");	/* RABEEH - TBD */
+		return ETH_ERROR;
+
+		p_tx_desc_curr->buf_ptr =
+			(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
+		eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
+			    p_pkt_info->byte_cnt);
+	} else
+		p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
+
+	p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
+	p_tx_desc_curr->return_info = p_pkt_info->return_info;
+
+	if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
+		/* Set last desc with DMA ownership and interrupt enable. */
+		p_tx_desc_curr->cmd_sts = command_status |
+			ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
+
+		if (p_tx_desc_curr != p_tx_desc_first)
+			p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
+
+		/* Flush CPU pipe */
+
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
+		CPU_PIPE_FLUSH;
+
+		/* Apply send command */
+		ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
+
+		/* Finish Tx packet. Update first desc in case of Tx resource error */
+		p_tx_desc_first = p_tx_next_desc_curr;
+		FIRST_TFD_SET (p_tx_desc_first, tx_queue);
+
+	} else {
+		p_tx_desc_curr->cmd_sts = command_status;
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+	}
+
+	/* Check for ring index overlap in the Tx desc ring */
+	if (p_tx_next_desc_curr == p_tx_desc_used) {
+		/* Update the current descriptor */
+		CURR_TFD_SET (p_tx_desc_first, tx_queue);
+
+		p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
+		return ETH_QUEUE_LAST_RESOURCE;
+	} else {
+		/* Update the current descriptor */
+		CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
+		return ETH_OK;
+	}
+}
+
+/*******************************************************************************
+ * eth_tx_return_desc - Free all used Tx descriptors
+ *
+ * DESCRIPTION:
+ *	This routine returns the transmitted packet information to the caller.
+ *      It uses the 'first' index to support Tx desc return in case a transmit
+ *      of a packet spanned over multiple buffer still in process.
+ *      In case the Tx queue was in "resource error" condition, where there are
+ *      no available Tx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	tx_queue         Number of Tx queue.
+ *	PKT_INFO        *p_pkt_info       User packet buffer.
+ *
+ * OUTPUT:
+ *	Tx ring 'first' and 'used' indexes are updated.
+ *
+ * RETURN:
+ *	ETH_ERROR in case the routine can not access Tx desc ring.
+ *      ETH_RETRY in case there is transmission in process.
+ *	ETH_END_OF_JOB if the routine has nothing to release.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
+					       p_eth_port_ctrl,
+					       ETH_QUEUE tx_queue,
+					       PKT_INFO * p_pkt_info)
+{
+	volatile ETH_TX_DESC *p_tx_desc_used = NULL;
+	volatile ETH_TX_DESC *p_tx_desc_first = NULL;
+	unsigned int command_status;
+
+
+	/* Get the Tx Desc ring indexes */
+	USED_TFD_GET (p_tx_desc_used, tx_queue);
+	FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+
+
+	/* Sanity check */
+	if (p_tx_desc_used == NULL)
+		return ETH_ERROR;
+
+	command_status = p_tx_desc_used->cmd_sts;
+
+	/* Still transmitting... */
+	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+		return ETH_RETRY;
+	}
+
+	/* Stop release. About to overlap the current available Tx descriptor */
+	if ((p_tx_desc_used == p_tx_desc_first) &&
+	    (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
+		D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+		return ETH_END_OF_JOB;
+	}
+
+	/* Pass the packet information to the caller */
+	p_pkt_info->cmd_sts = command_status;
+	p_pkt_info->return_info = p_tx_desc_used->return_info;
+	p_tx_desc_used->return_info = 0;
+
+	/* Update the next descriptor to release. */
+	USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
+
+	/* Any Tx return cancels the Tx resource error status */
+	if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+		p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
+
+	D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+
+	return ETH_OK;
+
+}
+
+/*******************************************************************************
+ * eth_port_receive - Get received information from Rx ring.
+ *
+ * DESCRIPTION:
+ * 	This routine returns the received data to the caller. There is no
+ *	data copying during routine operation. All information is returned
+ *	using pointer to packet information struct passed from the caller.
+ *      If the routine exhausts	Rx ring resources then the resource error flag
+ *      is set.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *	PKT_INFO        *p_pkt_info       User packet buffer.
+ *
+ * OUTPUT:
+ *	Rx ring current and used indexes are updated.
+ *
+ * RETURN:
+ *	ETH_ERROR in case the routine can not access Rx desc ring.
+ *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
+ *	ETH_END_OF_JOB if there is no received data.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
+					     ETH_QUEUE rx_queue,
+					     PKT_INFO * p_pkt_info)
+{
+	volatile ETH_RX_DESC *p_rx_curr_desc;
+	volatile ETH_RX_DESC *p_rx_next_curr_desc;
+	volatile ETH_RX_DESC *p_rx_used_desc;
+	unsigned int command_status;
+
+	/* Do not process Rx ring in case of Rx ring resource error */
+	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
+		printf ("\nRx Queue is full ...\n");
+		return ETH_QUEUE_FULL;
+	}
+
+	/* Get the Rx Desc ring 'curr and 'used' indexes */
+	CURR_RFD_GET (p_rx_curr_desc, rx_queue);
+	USED_RFD_GET (p_rx_used_desc, rx_queue);
+
+	/* Sanity check */
+	if (p_rx_curr_desc == NULL)
+		return ETH_ERROR;
+
+	/* The following parameters are used to save readings from memory */
+	p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
+	command_status = p_rx_curr_desc->cmd_sts;
+
+	/* Nothing to receive... */
+	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+/* 	DP(printf("Rx: command_status: %08x\n", command_status)); */
+		D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+/*	DP(printf("\nETH_END_OF_JOB ...\n"));*/
+		return ETH_END_OF_JOB;
+	}
+
+	p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
+	p_pkt_info->cmd_sts = command_status;
+	p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
+	p_pkt_info->return_info = p_rx_curr_desc->return_info;
+	p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size;	/* IP fragment indicator */
+
+	/* Clean the return info field to indicate that the packet has been */
+	/* moved to the upper layers                                        */
+	p_rx_curr_desc->return_info = 0;
+
+	/* Update 'curr' in data structure */
+	CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
+
+	/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
+	if (p_rx_next_curr_desc == p_rx_used_desc)
+		p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
+
+	D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+	CPU_PIPE_FLUSH;
+	return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
+ *
+ * DESCRIPTION:
+ *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
+ *      next 'used' descriptor and attached the returned buffer to it.
+ *      In case the Rx ring was in "resource error" condition, where there are
+ *      no available Rx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ *	ETH_PORT_INFO   *p_eth_port_ctrl   Ethernet Port Control srtuct.
+ *	ETH_QUEUE   	rx_queue         Number of Rx queue.
+ *      PKT_INFO        *p_pkt_info       Information on the returned buffer.
+ *
+ * OUTPUT:
+ *	New available Rx resource in Rx descriptor ring.
+ *
+ * RETURN:
+ *	ETH_ERROR in case the routine can not access Rx desc ring.
+ *      ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
+					       p_eth_port_ctrl,
+					       ETH_QUEUE rx_queue,
+					       PKT_INFO * p_pkt_info)
+{
+	volatile ETH_RX_DESC *p_used_rx_desc;	/* Where to return Rx resource */
+
+	/* Get 'used' Rx descriptor */
+	USED_RFD_GET (p_used_rx_desc, rx_queue);
+
+	/* Sanity check */
+	if (p_used_rx_desc == NULL)
+		return ETH_ERROR;
+
+	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
+	p_used_rx_desc->return_info = p_pkt_info->return_info;
+	p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
+	p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE;	/* Reset Buffer size */
+
+	/* Flush the write pipe */
+	CPU_PIPE_FLUSH;
+
+	/* Return the descriptor to DMA ownership */
+	p_used_rx_desc->cmd_sts =
+		ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+
+	/* Flush descriptor and CPU pipe */
+	D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
+	CPU_PIPE_FLUSH;
+
+	/* Move the used descriptor pointer to the next descriptor */
+	USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
+
+	/* Any Rx return cancels the Rx resource error status */
+	if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
+		p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
+
+	return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
+ *
+ * DESCRIPTION:
+ *	This routine sets the RX coalescing interrupt mechanism parameter.
+ *	This parameter is a timeout counter, that counts in 64 t_clk
+ *	chunks ; that when timeout event occurs a maskable interrupt
+ *	occurs.
+ *	The parameter is calculated using the tClk of the MV-643xx chip
+ *	, and the required delay of the interrupt in usec.
+ *
+ * INPUT:
+ *	ETH_PORT eth_port_num      Ethernet port number
+ *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
+ *	unsigned int delay       Delay in usec
+ *
+ * OUTPUT:
+ *	Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ *	The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0				/* FIXME */
+static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
+					  unsigned int t_clk,
+					  unsigned int delay)
+{
+	unsigned int coal;
+
+	coal = ((t_clk / 1000000) * delay) / 64;
+	/* Set RX Coalescing mechanism */
+	MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
+		      ((coal & 0x3fff) << 8) |
+		      (MV_REG_READ
+		       (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num))
+		       & 0xffc000ff));
+	return coal;
+}
+
+#endif
+/*******************************************************************************
+ * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
+ *
+ * DESCRIPTION:
+ *	This routine sets the TX coalescing interrupt mechanism parameter.
+ *	This parameter is a timeout counter, that counts in 64 t_clk
+ *	chunks ; that when timeout event occurs a maskable interrupt
+ *	occurs.
+ *	The parameter is calculated using the t_cLK frequency of the
+ *	MV-643xx chip and the required delay in the interrupt in uSec
+ *
+ * INPUT:
+ *	ETH_PORT eth_port_num      Ethernet port number
+ *	unsigned int t_clk        t_clk of the MV-643xx chip in HZ units
+ *	unsigned int delay       Delay in uSeconds
+ *
+ * OUTPUT:
+ *	Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ *	The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0				/* FIXME */
+static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
+					  unsigned int t_clk,
+					  unsigned int delay)
+{
+	unsigned int coal;
+
+	coal = ((t_clk / 1000000) * delay) / 64;
+	/* Set TX Coalescing mechanism */
+	MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
+		      coal << 4);
+	return coal;
+}
+#endif
+
+/*******************************************************************************
+ * eth_b_copy - Copy bytes from source to destination
+ *
+ * DESCRIPTION:
+ *       This function supports the eight bytes limitation on Tx buffer size.
+ *       The routine will zero eight bytes starting from the destination address
+ *       followed by copying bytes from the source address to the destination.
+ *
+ * INPUT:
+ *       unsigned int src_addr    32 bit source address.
+ *       unsigned int dst_addr    32 bit destination address.
+ *       int        byte_count    Number of bytes to copy.
+ *
+ * OUTPUT:
+ *       See description.
+ *
+ * RETURN:
+ *       None.
+ *
+ *******************************************************************************/
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+			int byte_count)
+{
+	/* Zero the dst_addr area */
+	*(unsigned int *) dst_addr = 0x0;
+
+	while (byte_count != 0) {
+		*(char *) dst_addr = *(char *) src_addr;
+		dst_addr++;
+		src_addr++;
+		byte_count--;
+	}
+}
diff --git a/board/Marvell/db64460/mv_eth.h b/board/Marvell/db64460/mv_eth.h
new file mode 100644
index 0000000000..b4e498b509
--- /dev/null
+++ b/board/Marvell/db64460/mv_eth.h
@@ -0,0 +1,840 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __DB64460_ETH_H__
+#define __DB64460_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+#include <net.h>
+#include "mv_regs.h"
+#include "../common/ppc_error_no.h"
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The first part is the high level driver of the gigE ethernet ports.	 *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
+#ifndef MAX_SKB_FRAGS
+#define MAX_SKB_FRAGS 0
+#endif
+
+/* Port attributes */
+/*#define MAX_RX_QUEUE_NUM	8*/
+/*#define MAX_TX_QUEUE_NUM	8*/
+#define MAX_RX_QUEUE_NUM	1
+#define MAX_TX_QUEUE_NUM	1
+
+
+/* Use one TX queue and one RX queue */
+#define MV64460_TX_QUEUE_NUM 1
+#define MV64460_RX_QUEUE_NUM 1
+
+/*
+ * Number of RX / TX descriptors on RX / TX rings.
+ * Note that allocating RX descriptors is done by allocating the RX
+ * ring AND a preallocated RX buffers (skb's) for each descriptor.
+ * The TX descriptors only allocates the TX descriptors ring,
+ * with no pre allocated TX buffers (skb's are allocated by higher layers.
+ */
+
+/* Default TX ring size is 10 descriptors */
+#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE
+#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE
+#else
+#define MV64460_TX_QUEUE_SIZE 4
+#endif
+
+/* Default RX ring size is 4 descriptors */
+#ifdef	CONFIG_MV64460_ETH_RXQUEUE_SIZE
+#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE
+#else
+#define MV64460_RX_QUEUE_SIZE 4
+#endif
+
+#ifdef CONFIG_RX_BUFFER_SIZE
+#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
+#else
+#define MV64460_RX_BUFFER_SIZE 1600
+#endif
+
+#ifdef CONFIG_TX_BUFFER_SIZE
+#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
+#else
+#define MV64460_TX_BUFFER_SIZE 1600
+#endif
+
+/*
+ *	Network device statistics. Akin to the 2.0 ether stats but
+ *	with byte counters.
+ */
+
+struct net_device_stats
+{
+	unsigned long	rx_packets;		/* total packets received	*/
+	unsigned long	tx_packets;		/* total packets transmitted	*/
+	unsigned long	rx_bytes;		/* total bytes received		*/
+	unsigned long	tx_bytes;		/* total bytes transmitted	*/
+	unsigned long	rx_errors;		/* bad packets received		*/
+	unsigned long	tx_errors;		/* packet transmit problems	*/
+	unsigned long	rx_dropped;		/* no space in linux buffers	*/
+	unsigned long	tx_dropped;		/* no space available in linux	*/
+	unsigned long	multicast;		/* multicast packets received	*/
+	unsigned long	collisions;
+
+	/* detailed rx_errors: */
+	unsigned long	rx_length_errors;
+	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
+	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
+	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
+	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	unsigned long	tx_aborted_errors;
+	unsigned long	tx_carrier_errors;
+	unsigned long	tx_fifo_errors;
+	unsigned long	tx_heartbeat_errors;
+	unsigned long	tx_window_errors;
+
+	/* for cslip etc */
+	unsigned long	rx_compressed;
+	unsigned long	tx_compressed;
+};
+
+
+/* Private data structure used for ethernet device */
+struct mv64460_eth_priv {
+    unsigned int port_num;
+    struct net_device_stats *stats;
+
+/* to buffer area aligned */
+    char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1];	/*pointers to alligned tx buffs in memory space */
+    char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1];	/*pointers to allinged rx buffs in memory space */
+
+    /* Size of Tx Ring per queue */
+    unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
+
+
+    /* Size of Rx Ring per queue */
+    unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
+
+    /* Magic Number for Ethernet running */
+    unsigned int eth_running;
+
+};
+
+int mv64460_eth_init (struct eth_device *dev);
+int mv64460_eth_stop (struct eth_device *dev);
+int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
+/*	return db64460_eth0_poll(); */
+
+int mv64460_eth_open (struct eth_device *dev);
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+*  The second part is the low level driver of the gigE ethernet ports.	 *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+
+/********************************************************************************
+ * Header File for : MV-643xx network interface header
+ *
+ * DESCRIPTION:
+ *	 This header file contains macros typedefs and function declaration for
+ *	 the Marvell Gig Bit Ethernet Controller.
+ *
+ * DEPENDENCIES:
+ *	 None.
+ *
+ *******************************************************************************/
+
+
+#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
+#ifdef CONFIG_MV64460_SRAM_CACHEABLE
+/* In case SRAM is cacheable but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset)       \
+{		    \
+  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case SRAM is cache coherent or non-cacheable */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif
+#else
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/* In case of descriptors on DDR but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset)       \
+{		    \
+  __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case of descriptors on DDR and cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
+
+
+#define CPU_PIPE_FLUSH		   \
+{		  \
+  __asm__ __volatile__ ("eieio");	  \
+}
+
+
+/* defines  */
+
+/* Default port configuration value */
+#define PORT_CONFIG_VALUE			\
+	     ETH_UNICAST_NORMAL_MODE		|   \
+	     ETH_DEFAULT_RX_QUEUE_0		|   \
+	     ETH_DEFAULT_RX_ARP_QUEUE_0		|   \
+	     ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP	|   \
+	     ETH_RECEIVE_BC_IF_IP		|   \
+	     ETH_RECEIVE_BC_IF_ARP		|   \
+	     ETH_CAPTURE_TCP_FRAMES_DIS		|   \
+	     ETH_CAPTURE_UDP_FRAMES_DIS		|   \
+	     ETH_DEFAULT_RX_TCP_QUEUE_0		|   \
+	     ETH_DEFAULT_RX_UDP_QUEUE_0		|   \
+	     ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+/* Default port extend configuration value */
+#define PORT_CONFIG_EXTEND_VALUE		\
+	     ETH_SPAN_BPDU_PACKETS_AS_NORMAL	|   \
+	     ETH_PARTITION_DISABLE
+
+
+/* Default sdma control value */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define PORT_SDMA_CONFIG_VALUE				\
+			 ETH_RX_BURST_SIZE_16_64BIT	|	\
+			 GT_ETH_IPG_INT_RX(0)			|	\
+			 ETH_TX_BURST_SIZE_16_64BIT;
+#else
+#define PORT_SDMA_CONFIG_VALUE			\
+			 ETH_RX_BURST_SIZE_4_64BIT	|	\
+			 GT_ETH_IPG_INT_RX(0)			|	\
+			 ETH_TX_BURST_SIZE_4_64BIT;
+#endif
+
+#define GT_ETH_IPG_INT_RX(value)		\
+	    ((value & 0x3fff) << 8)
+
+/* Default port serial control value */
+#define PORT_SERIAL_CONTROL_VALUE			    \
+			ETH_FORCE_LINK_PASS			|	\
+			ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
+			ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
+			ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
+			ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
+			ETH_FORCE_BP_MODE_NO_JAM		|	\
+			BIT9					|	\
+			ETH_DO_NOT_FORCE_LINK_FAIL		|	\
+			ETH_RETRANSMIT_16_ETTEMPTS		|	\
+			ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
+			ETH_DTE_ADV_0				|	\
+			ETH_DISABLE_AUTO_NEG_BYPASS		|	\
+			ETH_AUTO_NEG_NO_CHANGE			|	\
+			ETH_MAX_RX_PACKET_1552BYTE		|	\
+			ETH_CLR_EXT_LOOPBACK			|	\
+			ETH_SET_FULL_DUPLEX_MODE		|	\
+			ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
+
+#define RX_BUFFER_MAX_SIZE  0xFFFF
+#define TX_BUFFER_MAX_SIZE  0xFFFF   /* Buffer are limited to 64k */
+
+#define RX_BUFFER_MIN_SIZE  0x8
+#define TX_BUFFER_MIN_SIZE  0x8
+
+/* Tx WRR confoguration macros */
+#define PORT_MAX_TRAN_UNIT	    0x24    /* MTU register (default) 9KByte */
+#define PORT_MAX_TOKEN_BUCKET_SIZE  0x_fFFF  /* PMTBS register (default)      */
+#define PORT_TOKEN_RATE		    1023    /* PTTBRC register (default)     */
+
+/* MAC accepet/reject macros */
+#define ACCEPT_MAC_ADDR	    0
+#define REJECT_MAC_ADDR	    1
+
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define RX_DESC_ALIGNED_SIZE		0x20
+#define TX_DESC_ALIGNED_SIZE		0x20
+
+/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
+#define TX_BUF_OFFSET_IN_DESC	    0x18
+/* Buffer offset from buffer pointer */
+#define RX_BUF_OFFSET				0x2
+
+/* Gap define */
+#define ETH_BAR_GAP					0x8
+#define ETH_SIZE_REG_GAP				0x8
+#define ETH_HIGH_ADDR_REMAP_REG_GAP			0x4
+#define ETH_PORT_ACCESS_CTRL_GAP			0x4
+
+/* Gigabit Ethernet Unit Global Registers */
+
+/* MIB Counters register definitions */
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW   0x0
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH  0x4
+#define ETH_MIB_BAD_OCTETS_RECEIVED	   0x8
+#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR  0xc
+#define ETH_MIB_GOOD_FRAMES_RECEIVED	   0x10
+#define ETH_MIB_BAD_FRAMES_RECEIVED	   0x14
+#define ETH_MIB_BROADCAST_FRAMES_RECEIVED  0x18
+#define ETH_MIB_MULTICAST_FRAMES_RECEIVED  0x1c
+#define ETH_MIB_FRAMES_64_OCTETS	   0x20
+#define ETH_MIB_FRAMES_65_TO_127_OCTETS	   0x24
+#define ETH_MIB_FRAMES_128_TO_255_OCTETS   0x28
+#define ETH_MIB_FRAMES_256_TO_511_OCTETS   0x2c
+#define ETH_MIB_FRAMES_512_TO_1023_OCTETS  0x30
+#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS  0x34
+#define ETH_MIB_GOOD_OCTETS_SENT_LOW	   0x38
+#define ETH_MIB_GOOD_OCTETS_SENT_HIGH	   0x3c
+#define ETH_MIB_GOOD_FRAMES_SENT	   0x40
+#define ETH_MIB_EXCESSIVE_COLLISION	   0x44
+#define ETH_MIB_MULTICAST_FRAMES_SENT	   0x48
+#define ETH_MIB_BROADCAST_FRAMES_SENT	   0x4c
+#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
+#define ETH_MIB_FC_SENT			   0x54
+#define ETH_MIB_GOOD_FC_RECEIVED	   0x58
+#define ETH_MIB_BAD_FC_RECEIVED		   0x5c
+#define ETH_MIB_UNDERSIZE_RECEIVED	   0x60
+#define ETH_MIB_FRAGMENTS_RECEIVED	   0x64
+#define ETH_MIB_OVERSIZE_RECEIVED	   0x68
+#define ETH_MIB_JABBER_RECEIVED		   0x6c
+#define ETH_MIB_MAC_RECEIVE_ERROR	   0x70
+#define ETH_MIB_BAD_CRC_EVENT		   0x74
+#define ETH_MIB_COLLISION		   0x78
+#define ETH_MIB_LATE_COLLISION		   0x7c
+
+/* Port serial status reg (PSR) */
+#define ETH_INTERFACE_GMII_MII				0
+#define ETH_INTERFACE_PCM				BIT0
+#define ETH_LINK_IS_DOWN				0
+#define ETH_LINK_IS_UP					BIT1
+#define ETH_PORT_AT_HALF_DUPLEX				0
+#define ETH_PORT_AT_FULL_DUPLEX				BIT2
+#define ETH_RX_FLOW_CTRL_DISABLED			0
+#define ETH_RX_FLOW_CTRL_ENBALED			BIT3
+#define ETH_GMII_SPEED_100_10				0
+#define ETH_GMII_SPEED_1000				BIT4
+#define ETH_MII_SPEED_10				0
+#define ETH_MII_SPEED_100				BIT5
+#define ETH_NO_TX					0
+#define ETH_TX_IN_PROGRESS				BIT7
+#define ETH_BYPASS_NO_ACTIVE				0
+#define ETH_BYPASS_ACTIVE				BIT8
+#define ETH_PORT_NOT_AT_PARTITION_STATE			0
+#define ETH_PORT_AT_PARTITION_STATE			BIT9
+#define ETH_PORT_TX_FIFO_NOT_EMPTY			0
+#define ETH_PORT_TX_FIFO_EMPTY				BIT10
+
+
+/* These macros describes the Port configuration reg (Px_cR) bits */
+#define ETH_UNICAST_NORMAL_MODE				0
+#define ETH_UNICAST_PROMISCUOUS_MODE			BIT0
+#define ETH_DEFAULT_RX_QUEUE_0				0
+#define ETH_DEFAULT_RX_QUEUE_1				BIT1
+#define ETH_DEFAULT_RX_QUEUE_2				BIT2
+#define ETH_DEFAULT_RX_QUEUE_3				(BIT2 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_4				BIT3
+#define ETH_DEFAULT_RX_QUEUE_5				(BIT3 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_6				(BIT3 | BIT2)
+#define ETH_DEFAULT_RX_QUEUE_7				(BIT3 | BIT2 | BIT1)
+#define ETH_DEFAULT_RX_ARP_QUEUE_0			0
+#define ETH_DEFAULT_RX_ARP_QUEUE_1			BIT4
+#define ETH_DEFAULT_RX_ARP_QUEUE_2			BIT5
+#define ETH_DEFAULT_RX_ARP_QUEUE_3			(BIT5 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_4			BIT6
+#define ETH_DEFAULT_RX_ARP_QUEUE_5			(BIT6 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_6			(BIT6 | BIT5)
+#define ETH_DEFAULT_RX_ARP_QUEUE_7			(BIT6 | BIT5 | BIT4)
+#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP			0
+#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP			BIT7
+#define ETH_RECEIVE_BC_IF_IP				0
+#define ETH_REJECT_BC_IF_IP				BIT8
+#define ETH_RECEIVE_BC_IF_ARP				0
+#define ETH_REJECT_BC_IF_ARP				BIT9
+#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY		BIT12
+#define ETH_CAPTURE_TCP_FRAMES_DIS			0
+#define ETH_CAPTURE_TCP_FRAMES_EN			BIT14
+#define ETH_CAPTURE_UDP_FRAMES_DIS			0
+#define ETH_CAPTURE_UDP_FRAMES_EN			BIT15
+#define ETH_DEFAULT_RX_TCP_QUEUE_0			0
+#define ETH_DEFAULT_RX_TCP_QUEUE_1			BIT16
+#define ETH_DEFAULT_RX_TCP_QUEUE_2			BIT17
+#define ETH_DEFAULT_RX_TCP_QUEUE_3			(BIT17 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_4			BIT18
+#define ETH_DEFAULT_RX_TCP_QUEUE_5			(BIT18 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_6			(BIT18 | BIT17)
+#define ETH_DEFAULT_RX_TCP_QUEUE_7			(BIT18 | BIT17 | BIT16)
+#define ETH_DEFAULT_RX_UDP_QUEUE_0			0
+#define ETH_DEFAULT_RX_UDP_QUEUE_1			BIT19
+#define ETH_DEFAULT_RX_UDP_QUEUE_2			BIT20
+#define ETH_DEFAULT_RX_UDP_QUEUE_3			(BIT20 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_4			(BIT21
+#define ETH_DEFAULT_RX_UDP_QUEUE_5			(BIT21 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_6			(BIT21 | BIT20)
+#define ETH_DEFAULT_RX_UDP_QUEUE_7			(BIT21 | BIT20 | BIT19)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_0			 0
+#define ETH_DEFAULT_RX_BPDU_QUEUE_1			BIT22
+#define ETH_DEFAULT_RX_BPDU_QUEUE_2			BIT23
+#define ETH_DEFAULT_RX_BPDU_QUEUE_3			(BIT23 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_4			BIT24
+#define ETH_DEFAULT_RX_BPDU_QUEUE_5			(BIT24 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_6			(BIT24 | BIT23)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_7			(BIT24 | BIT23 | BIT22)
+
+
+/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
+#define ETH_CLASSIFY_EN					BIT0
+#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL			0
+#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		BIT1
+#define ETH_PARTITION_DISABLE				0
+#define ETH_PARTITION_ENABLE				BIT2
+
+
+/* Tx/Rx queue command reg (RQCR/TQCR)*/
+#define ETH_QUEUE_0_ENABLE				BIT0
+#define ETH_QUEUE_1_ENABLE				BIT1
+#define ETH_QUEUE_2_ENABLE				BIT2
+#define ETH_QUEUE_3_ENABLE				BIT3
+#define ETH_QUEUE_4_ENABLE				BIT4
+#define ETH_QUEUE_5_ENABLE				BIT5
+#define ETH_QUEUE_6_ENABLE				BIT6
+#define ETH_QUEUE_7_ENABLE				BIT7
+#define ETH_QUEUE_0_DISABLE				BIT8
+#define ETH_QUEUE_1_DISABLE				BIT9
+#define ETH_QUEUE_2_DISABLE				BIT10
+#define ETH_QUEUE_3_DISABLE				BIT11
+#define ETH_QUEUE_4_DISABLE				BIT12
+#define ETH_QUEUE_5_DISABLE				BIT13
+#define ETH_QUEUE_6_DISABLE				BIT14
+#define ETH_QUEUE_7_DISABLE				BIT15
+
+/* These macros describes the Port Sdma configuration reg (SDCR) bits */
+#define ETH_RIFB					BIT0
+#define ETH_RX_BURST_SIZE_1_64BIT			0
+#define ETH_RX_BURST_SIZE_2_64BIT			BIT1
+#define ETH_RX_BURST_SIZE_4_64BIT			BIT2
+#define ETH_RX_BURST_SIZE_8_64BIT			(BIT2 | BIT1)
+#define ETH_RX_BURST_SIZE_16_64BIT			BIT3
+#define ETH_BLM_RX_NO_SWAP				BIT4
+#define ETH_BLM_RX_BYTE_SWAP				0
+#define ETH_BLM_TX_NO_SWAP				BIT5
+#define ETH_BLM_TX_BYTE_SWAP				0
+#define ETH_DESCRIPTORS_BYTE_SWAP			BIT6
+#define ETH_DESCRIPTORS_NO_SWAP				0
+#define ETH_TX_BURST_SIZE_1_64BIT			0
+#define ETH_TX_BURST_SIZE_2_64BIT			BIT22
+#define ETH_TX_BURST_SIZE_4_64BIT			BIT23
+#define ETH_TX_BURST_SIZE_8_64BIT			(BIT23 | BIT22)
+#define ETH_TX_BURST_SIZE_16_64BIT			BIT24
+
+/* These macros describes the Port serial control reg (PSCR) bits */
+#define ETH_SERIAL_PORT_DISABLE				0
+#define ETH_SERIAL_PORT_ENABLE				BIT0
+#define ETH_FORCE_LINK_PASS				BIT1
+#define ETH_DO_NOT_FORCE_LINK_PASS			0
+#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX			0
+#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX			BIT2
+#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL		0
+#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL		BIT3
+#define ETH_ADV_NO_FLOW_CTRL				0
+#define ETH_ADV_SYMMETRIC_FLOW_CTRL			BIT4
+#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX		0
+#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS			BIT5
+#define ETH_FORCE_BP_MODE_NO_JAM			0
+#define ETH_FORCE_BP_MODE_JAM_TX			BIT7
+#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR		BIT8
+#define ETH_FORCE_LINK_FAIL				0
+#define ETH_DO_NOT_FORCE_LINK_FAIL			BIT10
+#define ETH_RETRANSMIT_16_ETTEMPTS			0
+#define ETH_RETRANSMIT_FOREVER				BIT11
+#define ETH_DISABLE_AUTO_NEG_SPEED_GMII			BIT13
+#define ETH_ENABLE_AUTO_NEG_SPEED_GMII			0
+#define ETH_DTE_ADV_0					0
+#define ETH_DTE_ADV_1					BIT14
+#define ETH_DISABLE_AUTO_NEG_BYPASS			0
+#define ETH_ENABLE_AUTO_NEG_BYPASS			BIT15
+#define ETH_AUTO_NEG_NO_CHANGE				0
+#define ETH_RESTART_AUTO_NEG				BIT16
+#define ETH_MAX_RX_PACKET_1518BYTE			0
+#define ETH_MAX_RX_PACKET_1522BYTE			BIT17
+#define ETH_MAX_RX_PACKET_1552BYTE			BIT18
+#define ETH_MAX_RX_PACKET_9022BYTE			(BIT18 | BIT17)
+#define ETH_MAX_RX_PACKET_9192BYTE			BIT19
+#define ETH_MAX_RX_PACKET_9700BYTE			(BIT19 | BIT17)
+#define ETH_SET_EXT_LOOPBACK				BIT20
+#define ETH_CLR_EXT_LOOPBACK				0
+#define ETH_SET_FULL_DUPLEX_MODE			BIT21
+#define ETH_SET_HALF_DUPLEX_MODE			0
+#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	BIT22
+#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	0
+#define ETH_SET_GMII_SPEED_TO_10_100			0
+#define ETH_SET_GMII_SPEED_TO_1000			BIT23
+#define ETH_SET_MII_SPEED_TO_10				0
+#define ETH_SET_MII_SPEED_TO_100			BIT24
+
+
+/* SMI reg */
+#define ETH_SMI_BUSY		BIT28	/* 0 - Write, 1 - Read		*/
+#define ETH_SMI_READ_VALID	BIT27	/* 0 - Write, 1 - Read		*/
+#define ETH_SMI_OPCODE_WRITE	0	/* Completion of Read operation */
+#define ETH_SMI_OPCODE_READ	BIT26	/* Operation is in progress		*/
+
+/* SDMA command status fields macros */
+
+/* Tx & Rx descriptors status */
+#define ETH_ERROR_SUMMARY		    (BIT0)
+
+/* Tx & Rx descriptors command */
+#define ETH_BUFFER_OWNED_BY_DMA		    (BIT31)
+
+/* Tx descriptors status */
+#define ETH_LC_ERROR			    (0	  )
+#define ETH_UR_ERROR			    (BIT1 )
+#define ETH_RL_ERROR			    (BIT2 )
+#define ETH_LLC_SNAP_FORMAT		    (BIT9 )
+
+/* Rx descriptors status */
+#define ETH_CRC_ERROR			    (0	  )
+#define ETH_OVERRUN_ERROR		    (BIT1 )
+#define ETH_MAX_FRAME_LENGTH_ERROR	    (BIT2 )
+#define ETH_RESOURCE_ERROR		    ((BIT2 | BIT1))
+#define ETH_VLAN_TAGGED			    (BIT19)
+#define ETH_BPDU_FRAME			    (BIT20)
+#define ETH_TCP_FRAME_OVER_IP_V_4	    (0	  )
+#define ETH_UDP_FRAME_OVER_IP_V_4	    (BIT21)
+#define ETH_OTHER_FRAME_TYPE		    (BIT22)
+#define ETH_LAYER_2_IS_ETH_V_2		    (BIT23)
+#define ETH_FRAME_TYPE_IP_V_4		    (BIT24)
+#define ETH_FRAME_HEADER_OK		    (BIT25)
+#define ETH_RX_LAST_DESC		    (BIT26)
+#define ETH_RX_FIRST_DESC		    (BIT27)
+#define ETH_UNKNOWN_DESTINATION_ADDR	    (BIT28)
+#define ETH_RX_ENABLE_INTERRUPT		    (BIT29)
+#define ETH_LAYER_4_CHECKSUM_OK		    (BIT30)
+
+/* Rx descriptors byte count */
+#define ETH_FRAME_FRAGMENTED		    (BIT2)
+
+/* Tx descriptors command */
+#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		(BIT10)
+#define ETH_FRAME_SET_TO_VLAN		    (BIT15)
+#define ETH_TCP_FRAME			    (0	  )
+#define ETH_UDP_FRAME			    (BIT16)
+#define ETH_GEN_TCP_UDP_CHECKSUM	    (BIT17)
+#define ETH_GEN_IP_V_4_CHECKSUM		    (BIT18)
+#define ETH_ZERO_PADDING		    (BIT19)
+#define ETH_TX_LAST_DESC		    (BIT20)
+#define ETH_TX_FIRST_DESC		    (BIT21)
+#define ETH_GEN_CRC			    (BIT22)
+#define ETH_TX_ENABLE_INTERRUPT		    (BIT23)
+#define ETH_AUTO_MODE			    (BIT30)
+
+/* Address decode parameters */
+/* Ethernet Base Address Register bits */
+#define EBAR_TARGET_DRAM					0x00000000
+#define EBAR_TARGET_DEVICE					0x00000001
+#define EBAR_TARGET_CBS						0x00000002
+#define EBAR_TARGET_PCI0					0x00000003
+#define EBAR_TARGET_PCI1					0x00000004
+#define EBAR_TARGET_CUNIT					0x00000005
+#define EBAR_TARGET_AUNIT					0x00000006
+#define EBAR_TARGET_GUNIT					0x00000007
+
+/* Window attributes */
+#define EBAR_ATTR_DRAM_CS0					0x00000E00
+#define EBAR_ATTR_DRAM_CS1					0x00000D00
+#define EBAR_ATTR_DRAM_CS2					0x00000B00
+#define EBAR_ATTR_DRAM_CS3					0x00000700
+
+/* DRAM Target interface */
+#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY	0x00000000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT	0x00001000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB	0x00002000
+
+/* Device Bus Target interface */
+#define EBAR_ATTR_DEVICE_DEVCS0				0x00001E00
+#define EBAR_ATTR_DEVICE_DEVCS1				0x00001D00
+#define EBAR_ATTR_DEVICE_DEVCS2				0x00001B00
+#define EBAR_ATTR_DEVICE_DEVCS3				0x00001700
+#define EBAR_ATTR_DEVICE_BOOTCS3			0x00000F00
+
+/* PCI Target interface */
+#define EBAR_ATTR_PCI_BYTE_SWAP				0x00000000
+#define EBAR_ATTR_PCI_NO_SWAP				0x00000100
+#define EBAR_ATTR_PCI_BYTE_WORD_SWAP		0x00000200
+#define EBAR_ATTR_PCI_WORD_SWAP				0x00000300
+#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT	0x00000000
+#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT		0x00000400
+#define EBAR_ATTR_PCI_IO_SPACE				0x00000000
+#define EBAR_ATTR_PCI_MEMORY_SPACE			0x00000800
+#define EBAR_ATTR_PCI_REQ64_FORCE			0x00000000
+#define EBAR_ATTR_PCI_REQ64_SIZE			0x00001000
+
+/* CPU 60x bus or internal SRAM interface */
+#define EBAR_ATTR_CBS_SRAM_BLOCK0			0x00000000
+#define EBAR_ATTR_CBS_SRAM_BLOCK1			0x00000100
+#define EBAR_ATTR_CBS_SRAM					0x00000000
+#define EBAR_ATTR_CBS_CPU_BUS				0x00000800
+
+/* Window access control */
+#define EWIN_ACCESS_NOT_ALLOWED 0
+#define EWIN_ACCESS_READ_ONLY	BIT0
+#define EWIN_ACCESS_FULL	(BIT1 | BIT0)
+#define EWIN0_ACCESS_MASK		0x0003
+#define EWIN1_ACCESS_MASK		0x000C
+#define EWIN2_ACCESS_MASK		0x0030
+#define EWIN3_ACCESS_MASK		0x00C0
+
+/* typedefs */
+
+typedef enum _eth_port
+{
+    ETH_0 = 0,
+	ETH_1 = 1,
+	ETH_2 = 2
+}ETH_PORT;
+
+typedef enum _eth_func_ret_status
+{
+    ETH_OK,			/* Returned as expected.		    */
+    ETH_ERROR,			/* Fundamental error.			    */
+    ETH_RETRY,			/* Could not process request. Try later.    */
+    ETH_END_OF_JOB,		/* Ring has nothing to process.		    */
+    ETH_QUEUE_FULL,		/* Ring resource error.			    */
+    ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	    */
+}ETH_FUNC_RET_STATUS;
+
+typedef enum _eth_queue
+{
+	ETH_Q0 = 0,
+	ETH_Q1 = 1,
+	ETH_Q2 = 2,
+	ETH_Q3 = 3,
+	ETH_Q4 = 4,
+	ETH_Q5 = 5,
+	ETH_Q6 = 6,
+    ETH_Q7 = 7
+} ETH_QUEUE;
+
+typedef enum _addr_win
+{
+	ETH_WIN0,
+	ETH_WIN1,
+	ETH_WIN2,
+	ETH_WIN3,
+	ETH_WIN4,
+    ETH_WIN5
+} ETH_ADDR_WIN;
+
+typedef enum _eth_target
+{
+	ETH_TARGET_DRAM	 ,
+	ETH_TARGET_DEVICE,
+	ETH_TARGET_CBS	 ,
+	ETH_TARGET_PCI0	 ,
+	ETH_TARGET_PCI1
+}ETH_TARGET;
+
+typedef struct _eth_rx_desc
+{
+	unsigned short	byte_cnt	   ;	/* Descriptor buffer byte count	    */
+	unsigned short	buf_size	   ;	/* Buffer size			    */
+	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
+	unsigned int	next_desc_ptr;	  /* Next descriptor pointer	      */
+	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
+    unsigned int    return_info ;    /* User resource return information */
+} ETH_RX_DESC;
+
+
+typedef struct _eth_tx_desc
+{
+    unsigned short  byte_cnt	   ;	/* Descriptor buffer byte count	    */
+    unsigned short  l4i_chk	   ;	/* CPU provided TCP Checksum	    */
+    unsigned int    cmd_sts	   ;	/* Descriptor command status	    */
+    unsigned int    next_desc_ptr;    /* Next descriptor pointer	  */
+    unsigned int    buf_ptr	   ;	/* Descriptor buffer pointer	    */
+    unsigned int    return_info ;    /* User resource return information */
+} ETH_TX_DESC;
+
+/* Unified struct for Rx and Tx operations. The user is not required to */
+/* be familier with neither Tx nor Rx descriptors.			 */
+typedef struct _pkt_info
+{
+	unsigned short	byte_cnt   ;	/* Descriptor buffer byte count	    */
+	unsigned short	l4i_chk	   ;	/* Tx CPU provided TCP Checksum	    */
+	unsigned int	cmd_sts	   ;	/* Descriptor command status	    */
+	unsigned int	buf_ptr	   ;	/* Descriptor buffer pointer	    */
+    unsigned int    return_info ;    /* User resource return information */
+} PKT_INFO;
+
+
+typedef struct _eth_win_param
+{
+    ETH_ADDR_WIN win;	/* Window number. See ETH_ADDR_WIN enum */
+    ETH_TARGET	target;	   /* System targets. See ETH_TARGET enum */
+    unsigned short attributes;	/* BAR attributes. See above macros. */
+    unsigned int base_addr; /* Window base address in unsigned int form */
+    unsigned int high_addr; /* Window high address in unsigned int form */
+    unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
+    bool enable; /* Enable/disable access to the window. */
+    unsigned short access_ctrl; /* Access ctrl register. see above macros */
+} ETH_WIN_PARAM;
+
+
+/* Ethernet port specific infomation */
+
+typedef struct _eth_port_ctrl
+{
+    ETH_PORT  port_num; /* User Ethernet port number */
+    int port_phy_addr;	/* User phy address of Ethrnet port */
+    unsigned char port_mac_addr[6]; /* User defined port MAC address. */
+    unsigned int  port_config; /* User port configuration value */
+    unsigned int  port_config_extend; /* User port config extend value */
+    unsigned int  port_sdma_config; /* User port SDMA config value */
+    unsigned int  port_serial_control; /* User port serial control value */
+    unsigned int  port_tx_queue_command; /* Port active Tx queues summary */
+    unsigned int  port_rx_queue_command; /* Port active Rx queues summary */
+
+    /* User function to cast virtual address to CPU bus address */
+    unsigned int  (*port_virt_to_phys)(unsigned int addr);
+    /* User scratch pad for user specific data structures */
+    void *port_private;
+
+    bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
+    bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
+
+    /* Tx/Rx rings managment indexes fields. For driver use */
+
+    /* Next available Rx resource */
+    volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
+    /* Returning Rx resource */
+    volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
+
+    /* Next available Tx resource */
+    volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
+    /* Returning Tx resource */
+    volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
+    /* An extra Tx index to support transmit of multiple buffers per packet */
+    volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
+
+    /* Tx/Rx rings size and base variables fields. For driver use */
+
+    volatile ETH_RX_DESC	*p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
+    unsigned int		 rx_desc_area_size[MAX_RX_QUEUE_NUM];
+    char			*p_rx_buffer_base[MAX_RX_QUEUE_NUM];
+
+    volatile ETH_TX_DESC	*p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
+    unsigned int		 tx_desc_area_size[MAX_TX_QUEUE_NUM];
+    char			*p_tx_buffer_base[MAX_TX_QUEUE_NUM];
+
+} ETH_PORT_INFO;
+
+
+/* ethernet.h API list */
+
+/* Port operation control routines */
+static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
+static void eth_port_reset(ETH_PORT	eth_port_num);
+static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
+
+
+/* Port MAC address routines */
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+				  unsigned char *p_addr,
+				  ETH_QUEUE queue);
+#if 0	/* FIXME */
+static void eth_port_mc_addr	(ETH_PORT eth_port_num,
+				 unsigned char *p_addr,
+				 ETH_QUEUE queue,
+				 int option);
+#endif
+
+/* PHY and MIB routines */
+static bool ethernet_phy_reset(ETH_PORT eth_port_num);
+
+static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
+				   unsigned int phy_reg,
+				   unsigned int value);
+
+static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
+				  unsigned int phy_reg,
+				  unsigned int* value);
+
+static void eth_clear_mib_counters(ETH_PORT	eth_port_num);
+
+/* Port data flow control routines */
+static ETH_FUNC_RET_STATUS eth_port_send    (ETH_PORT_INFO *p_eth_port_ctrl,
+					     ETH_QUEUE tx_queue,
+					     PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
+					      ETH_QUEUE tx_queue,
+					      PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
+					     ETH_QUEUE rx_queue,
+					     PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
+					      ETH_QUEUE rx_queue,
+					      PKT_INFO *p_pkt_info);
+
+
+static bool ether_init_tx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
+				    ETH_QUEUE	tx_queue,
+				    int				tx_desc_num,
+				    int				tx_buff_size,
+				    unsigned int	tx_desc_base_addr,
+				    unsigned int	tx_buff_base_addr);
+
+static bool ether_init_rx_desc_ring(ETH_PORT_INFO  *p_eth_port_ctrl,
+				    ETH_QUEUE	rx_queue,
+				    int				rx_desc_num,
+				    int				rx_buff_size,
+				    unsigned int	rx_desc_base_addr,
+				    unsigned int	rx_buff_base_addr);
+
+#endif /* MV64460_ETH_ */
diff --git a/board/Marvell/db64460/mv_regs.h b/board/Marvell/db64460/mv_regs.h
new file mode 100644
index 0000000000..fb50bb6a08
--- /dev/null
+++ b/board/Marvell/db64460/mv_regs.h
@@ -0,0 +1,1124 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/********************************************************************************
+* gt64460r.h - GT-64460 Internal registers definition file.
+*
+* DESCRIPTION:
+*	None.
+*
+* DEPENDENCIES:
+*	None.
+*
+*******************************************************************************/
+
+#ifndef __INCmv_regsh
+#define __INCmv_regsh
+
+#define MV64460
+
+/* Supported by the Atlantis */
+#define MV64460_INCLUDE_PCI_1
+#define MV64460_INCLUDE_PCI_0_ARBITER
+#define MV64460_INCLUDE_PCI_1_ARBITER
+#define MV64460_INCLUDE_SNOOP_SUPPORT
+#define MV64460_INCLUDE_P2P
+#define MV64460_INCLUDE_ETH_PORT_2
+#define MV64460_INCLUDE_CPU_MAPPING
+#define MV64460_INCLUDE_MPSC
+
+/* Not supported features */
+#undef	INCLUDE_CNTMR_4_7
+#undef	INCLUDE_DMA_4_7
+
+/****************************************/
+/* Processor Address Space		*/
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64460_CS_0_BASE_ADDR					    0x008
+#define MV64460_CS_0_SIZE					    0x010
+#define MV64460_CS_1_BASE_ADDR					    0x208
+#define MV64460_CS_1_SIZE					    0x210
+#define MV64460_CS_2_BASE_ADDR					    0x018
+#define MV64460_CS_2_SIZE					    0x020
+#define MV64460_CS_3_BASE_ADDR					    0x218
+#define MV64460_CS_3_SIZE					    0x220
+
+/* Devices BAR and size registers */
+
+#define MV64460_DEV_CS0_BASE_ADDR				    0x028
+#define MV64460_DEV_CS0_SIZE					    0x030
+#define MV64460_DEV_CS1_BASE_ADDR				    0x228
+#define MV64460_DEV_CS1_SIZE					    0x230
+#define MV64460_DEV_CS2_BASE_ADDR				    0x248
+#define MV64460_DEV_CS2_SIZE					    0x250
+#define MV64460_DEV_CS3_BASE_ADDR				    0x038
+#define MV64460_DEV_CS3_SIZE					    0x040
+#define MV64460_BOOTCS_BASE_ADDR				    0x238
+#define MV64460_BOOTCS_SIZE					    0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64460_PCI_0_IO_BASE_ADDR				    0x048
+#define MV64460_PCI_0_IO_SIZE					    0x050
+#define MV64460_PCI_0_MEMORY0_BASE_ADDR				    0x058
+#define MV64460_PCI_0_MEMORY0_SIZE				    0x060
+#define MV64460_PCI_0_MEMORY1_BASE_ADDR				    0x080
+#define MV64460_PCI_0_MEMORY1_SIZE				    0x088
+#define MV64460_PCI_0_MEMORY2_BASE_ADDR				    0x258
+#define MV64460_PCI_0_MEMORY2_SIZE				    0x260
+#define MV64460_PCI_0_MEMORY3_BASE_ADDR				    0x280
+#define MV64460_PCI_0_MEMORY3_SIZE				    0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64460_PCI_1_IO_BASE_ADDR				    0x090
+#define MV64460_PCI_1_IO_SIZE					    0x098
+#define MV64460_PCI_1_MEMORY0_BASE_ADDR				    0x0a0
+#define MV64460_PCI_1_MEMORY0_SIZE				    0x0a8
+#define MV64460_PCI_1_MEMORY1_BASE_ADDR				    0x0b0
+#define MV64460_PCI_1_MEMORY1_SIZE				    0x0b8
+#define MV64460_PCI_1_MEMORY2_BASE_ADDR				    0x2a0
+#define MV64460_PCI_1_MEMORY2_SIZE				    0x2a8
+#define MV64460_PCI_1_MEMORY3_BASE_ADDR				    0x2b0
+#define MV64460_PCI_1_MEMORY3_SIZE				    0x2b8
+
+/* SRAM base address */
+#define MV64460_INTEGRATED_SRAM_BASE_ADDR			    0x268
+
+/* internal registers space base address */
+#define MV64460_INTERNAL_SPACE_BASE_ADDR			    0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+   windows above */
+#define MV64460_BASE_ADDR_ENABLE				    0x278
+
+/****************************************/
+/* PCI remap registers			*/
+/****************************************/
+      /* PCI 0 */
+#define MV64460_PCI_0_IO_ADDR_REMAP				    0x0f0
+#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP			    0x0f8
+#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP			    0x320
+#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP			    0x100
+#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP			    0x328
+#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP			    0x2f8
+#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP			    0x330
+#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP			    0x300
+#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP			    0x338
+      /* PCI 1 */
+#define MV64460_PCI_1_IO_ADDR_REMAP				    0x108
+#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP			    0x110
+#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP			    0x340
+#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP			    0x118
+#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP			    0x348
+#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP			    0x310
+#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP			    0x350
+#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP			    0x318
+#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP			    0x358
+
+#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL		    0x3b0
+#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE			    0x3b8
+#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL		    0x3c0
+#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE			    0x3c8
+#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL			    0x3d0
+#define MV64460_CPU_GE_HEADERS_RETARGET_BASE			    0x3d8
+#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL		    0x3e0
+#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE			    0x3e8
+
+/****************************************/
+/*	   CPU Control Registers	*/
+/****************************************/
+
+#define MV64460_CPU_CONFIG					    0x000
+#define MV64460_CPU_MODE					    0x120
+#define MV64460_CPU_MASTER_CONTROL				    0x160
+#define MV64460_CPU_CROSS_BAR_CONTROL_LOW			    0x150
+#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH			    0x158
+#define MV64460_CPU_CROSS_BAR_TIMEOUT				    0x168
+
+/****************************************/
+/* SMP RegisterS			*/
+/****************************************/
+
+#define MV64460_SMP_WHO_AM_I					    0x200
+#define MV64460_SMP_CPU0_DOORBELL				    0x214
+#define MV64460_SMP_CPU0_DOORBELL_CLEAR				    0x21C
+#define MV64460_SMP_CPU1_DOORBELL				    0x224
+#define MV64460_SMP_CPU1_DOORBELL_CLEAR				    0x22C
+#define MV64460_SMP_CPU0_DOORBELL_MASK				    0x234
+#define MV64460_SMP_CPU1_DOORBELL_MASK				    0x23C
+#define MV64460_SMP_SEMAPHOR0					    0x244
+#define MV64460_SMP_SEMAPHOR1					    0x24c
+#define MV64460_SMP_SEMAPHOR2					    0x254
+#define MV64460_SMP_SEMAPHOR3					    0x25c
+#define MV64460_SMP_SEMAPHOR4					    0x264
+#define MV64460_SMP_SEMAPHOR5					    0x26c
+#define MV64460_SMP_SEMAPHOR6					    0x274
+#define MV64460_SMP_SEMAPHOR7					    0x27c
+
+/****************************************/
+/*  CPU Sync Barrier Register		*/
+/****************************************/
+
+#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER			    0x0c0
+#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL			    0x0c8
+#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER			    0x0d0
+#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL			    0x0d8
+
+/****************************************/
+/* CPU Access Protect			*/
+/****************************************/
+
+#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR			    0x180
+#define MV64460_CPU_PROTECT_WINDOW_0_SIZE			    0x188
+#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR			    0x190
+#define MV64460_CPU_PROTECT_WINDOW_1_SIZE			    0x198
+#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR			    0x1a0
+#define MV64460_CPU_PROTECT_WINDOW_2_SIZE			    0x1a8
+#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR			    0x1b0
+#define MV64460_CPU_PROTECT_WINDOW_3_SIZE			    0x1b8
+
+
+/****************************************/
+/*	    CPU Error Report		*/
+/****************************************/
+
+#define MV64460_CPU_ERROR_ADDR_LOW				    0x070
+#define MV64460_CPU_ERROR_ADDR_HIGH				    0x078
+#define MV64460_CPU_ERROR_DATA_LOW				    0x128
+#define MV64460_CPU_ERROR_DATA_HIGH				    0x130
+#define MV64460_CPU_ERROR_PARITY				    0x138
+#define MV64460_CPU_ERROR_CAUSE					    0x140
+#define MV64460_CPU_ERROR_MASK					    0x148
+
+/****************************************/
+/*	CPU Interface Debug Registers	*/
+/****************************************/
+
+#define MV64460_PUNIT_SLAVE_DEBUG_LOW				    0x360
+#define MV64460_PUNIT_SLAVE_DEBUG_HIGH				    0x368
+#define MV64460_PUNIT_MASTER_DEBUG_LOW				    0x370
+#define MV64460_PUNIT_MASTER_DEBUG_HIGH				    0x378
+#define MV64460_PUNIT_MMASK					    0x3e4
+
+/****************************************/
+/*  Integrated SRAM Registers		*/
+/****************************************/
+
+#define MV64460_SRAM_CONFIG					    0x380
+#define MV64460_SRAM_TEST_MODE					    0X3F4
+#define MV64460_SRAM_ERROR_CAUSE				    0x388
+#define MV64460_SRAM_ERROR_ADDR					    0x390
+#define MV64460_SRAM_ERROR_ADDR_HIGH				    0X3F8
+#define MV64460_SRAM_ERROR_DATA_LOW				    0x398
+#define MV64460_SRAM_ERROR_DATA_HIGH				    0x3a0
+#define MV64460_SRAM_ERROR_DATA_PARITY				    0x3a8
+
+/****************************************/
+/* SDRAM Configuration			*/
+/****************************************/
+
+#define MV64460_SDRAM_CONFIG					    0x1400
+#define MV64460_D_UNIT_CONTROL_LOW				    0x1404
+#define MV64460_D_UNIT_CONTROL_HIGH				    0x1424
+#define MV64460_SDRAM_TIMING_CONTROL_LOW			    0x1408
+#define MV64460_SDRAM_TIMING_CONTROL_HIGH			    0x140c
+#define MV64460_SDRAM_ADDR_CONTROL				    0x1410
+#define MV64460_SDRAM_OPEN_PAGES_CONTROL			    0x1414
+#define MV64460_SDRAM_OPERATION					    0x1418
+#define MV64460_SDRAM_MODE					    0x141c
+#define MV64460_EXTENDED_DRAM_MODE				    0x1420
+#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW			    0x1430
+#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH			    0x1434
+#define MV64460_SDRAM_CROSS_BAR_TIMEOUT				    0x1438
+#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION		    0x14c0
+#define MV64460_SDRAM_DATA_PADS_CALIBRATION			    0x14c4
+
+/****************************************/
+/* SDRAM Error Report			*/
+/****************************************/
+
+#define MV64460_SDRAM_ERROR_DATA_LOW				    0x1444
+#define MV64460_SDRAM_ERROR_DATA_HIGH				    0x1440
+#define MV64460_SDRAM_ERROR_ADDR				    0x1450
+#define MV64460_SDRAM_RECEIVED_ECC				    0x1448
+#define MV64460_SDRAM_CALCULATED_ECC				    0x144c
+#define MV64460_SDRAM_ECC_CONTROL				    0x1454
+#define MV64460_SDRAM_ECC_ERROR_COUNTER				    0x1458
+
+/******************************************/
+/*  Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64460_DFCDL_CONFIG0					    0x1480
+#define MV64460_DFCDL_CONFIG1					    0x1484
+#define MV64460_DLL_WRITE					    0x1488
+#define MV64460_DLL_READ					    0x148c
+#define MV64460_SRAM_ADDR					    0x1490
+#define MV64460_SRAM_DATA0					    0x1494
+#define MV64460_SRAM_DATA1					    0x1498
+#define MV64460_SRAM_DATA2					    0x149c
+#define MV64460_DFCL_PROBE					    0x14a0
+
+/******************************************/
+/*   Debug Registers			  */
+/******************************************/
+
+#define MV64460_DUNIT_DEBUG_LOW					    0x1460
+#define MV64460_DUNIT_DEBUG_HIGH				    0x1464
+#define MV64460_DUNIT_MMASK					    0X1b40
+
+/****************************************/
+/* Device Parameters			*/
+/****************************************/
+
+#define MV64460_DEVICE_BANK0_PARAMETERS				    0x45c
+#define MV64460_DEVICE_BANK1_PARAMETERS				    0x460
+#define MV64460_DEVICE_BANK2_PARAMETERS				    0x464
+#define MV64460_DEVICE_BANK3_PARAMETERS				    0x468
+#define MV64460_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
+#define MV64460_DEVICE_INTERFACE_CONTROL			    0x4c0
+#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		    0x4c8
+#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		    0x4cc
+#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT		    0x4c4
+
+/****************************************/
+/* Device interrupt registers		*/
+/****************************************/
+
+#define MV64460_DEVICE_INTERRUPT_CAUSE				    0x4d0
+#define MV64460_DEVICE_INTERRUPT_MASK				    0x4d4
+#define MV64460_DEVICE_ERROR_ADDR				    0x4d8
+#define MV64460_DEVICE_ERROR_DATA				    0x4dc
+#define MV64460_DEVICE_ERROR_PARITY				    0x4e0
+
+/****************************************/
+/* Device debug registers		*/
+/****************************************/
+
+#define MV64460_DEVICE_DEBUG_LOW				    0x4e4
+#define MV64460_DEVICE_DEBUG_HIGH				    0x4e8
+#define MV64460_RUNIT_MMASK					    0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64460_PCI_0_CS_0_BANK_SIZE				    0xc08
+#define MV64460_PCI_1_CS_0_BANK_SIZE				    0xc88
+#define MV64460_PCI_0_CS_1_BANK_SIZE				    0xd08
+#define MV64460_PCI_1_CS_1_BANK_SIZE				    0xd88
+#define MV64460_PCI_0_CS_2_BANK_SIZE				    0xc0c
+#define MV64460_PCI_1_CS_2_BANK_SIZE				    0xc8c
+#define MV64460_PCI_0_CS_3_BANK_SIZE				    0xd0c
+#define MV64460_PCI_1_CS_3_BANK_SIZE				    0xd8c
+#define MV64460_PCI_0_DEVCS_0_BANK_SIZE				    0xc10
+#define MV64460_PCI_1_DEVCS_0_BANK_SIZE				    0xc90
+#define MV64460_PCI_0_DEVCS_1_BANK_SIZE				    0xd10
+#define MV64460_PCI_1_DEVCS_1_BANK_SIZE				    0xd90
+#define MV64460_PCI_0_DEVCS_2_BANK_SIZE				    0xd18
+#define MV64460_PCI_1_DEVCS_2_BANK_SIZE				    0xd98
+#define MV64460_PCI_0_DEVCS_3_BANK_SIZE				    0xc14
+#define MV64460_PCI_1_DEVCS_3_BANK_SIZE				    0xc94
+#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE			    0xd14
+#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE			    0xd94
+#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE				    0xd1c
+#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE				    0xd9c
+#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE				    0xd20
+#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE				    0xda0
+#define MV64460_PCI_0_P2P_I_O_BAR_SIZE				    0xd24
+#define MV64460_PCI_1_P2P_I_O_BAR_SIZE				    0xda4
+#define MV64460_PCI_0_CPU_BAR_SIZE				    0xd28
+#define MV64460_PCI_1_CPU_BAR_SIZE				    0xda8
+#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE			    0xe00
+#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE			    0xe80
+#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE			    0xd2c
+#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE			    0xd9c
+#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE			    0xc3c
+#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE			    0xcbc
+#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
+#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
+#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
+#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
+#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
+#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
+#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
+#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
+#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
+#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
+#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
+#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
+#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
+#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
+#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
+#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
+#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
+#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
+#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
+#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
+#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
+#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
+#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP			    0xc54
+#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP			    0xcd4
+#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xd54
+#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP		    0xdd4
+#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xd5c
+#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW		    0xddc
+#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xd60
+#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH		    0xde0
+#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xd64
+#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW		    0xde4
+#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xd68
+#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH		    0xde8
+#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP			    0xd6c
+#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP			    0xdec
+#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW			    0xd70
+#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW			    0xdf0
+#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH			    0xd74
+#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH			    0xdf4
+#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf00
+#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		    0xf80
+#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		    0xf38
+#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		    0xfb8
+#define MV64460_PCI_0_ADDR_DECODE_CONTROL			    0xd3c
+#define MV64460_PCI_1_ADDR_DECODE_CONTROL			    0xdbc
+#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL			    0xF40
+#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL			    0xFc0
+#define MV64460_PCI_0_HEADERS_RETARGET_BASE			    0xF44
+#define MV64460_PCI_1_HEADERS_RETARGET_BASE			    0xFc4
+#define MV64460_PCI_0_HEADERS_RETARGET_HIGH			    0xF48
+#define MV64460_PCI_1_HEADERS_RETARGET_HIGH			    0xFc8
+
+/***********************************/
+/*   PCI Control Register Map	   */
+/***********************************/
+
+#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND			    0x1d20
+#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND			    0x1da0
+#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL			    0x1d1C
+#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL			    0x1d9C
+#define MV64460_PCI_0_COMMAND					    0xc00
+#define MV64460_PCI_1_COMMAND					    0xc80
+#define MV64460_PCI_0_MODE					    0xd00
+#define MV64460_PCI_1_MODE					    0xd80
+#define MV64460_PCI_0_RETRY					    0xc04
+#define MV64460_PCI_1_RETRY					    0xc84
+#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER			    0xd04
+#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER			    0xd84
+#define MV64460_PCI_0_MSI_TRIGGER_TIMER				    0xc38
+#define MV64460_PCI_1_MSI_TRIGGER_TIMER				    0xcb8
+#define MV64460_PCI_0_ARBITER_CONTROL				    0x1d00
+#define MV64460_PCI_1_ARBITER_CONTROL				    0x1d80
+#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW			    0x1d08
+#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW			    0x1d88
+#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH			    0x1d0c
+#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH			    0x1d8c
+#define MV64460_PCI_0_CROSS_BAR_TIMEOUT				    0x1d04
+#define MV64460_PCI_1_CROSS_BAR_TIMEOUT				    0x1d84
+#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG			    0x1D18
+#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG			    0x1D98
+#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG			    0x1d10
+#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG			    0x1d90
+#define MV64460_PCI_0_P2P_CONFIG				    0x1d14
+#define MV64460_PCI_1_P2P_CONFIG				    0x1d94
+
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW			    0x1e00
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH		    0x1e04
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0			    0x1e08
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW			    0x1e10
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH		    0x1e14
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1			    0x1e18
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW			    0x1e20
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH		    0x1e24
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2			    0x1e28
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW			    0x1e30
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH		    0x1e34
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3			    0x1e38
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW			    0x1e40
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH		    0x1e44
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4			    0x1e48
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW			    0x1e50
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH		    0x1e54
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5			    0x1e58
+
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW			    0x1e80
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH		    0x1e84
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0			    0x1e88
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW			    0x1e90
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH		    0x1e94
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1			    0x1e98
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW			    0x1ea0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH		    0x1ea4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2			    0x1ea8
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW			    0x1eb0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH		    0x1eb4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3			    0x1eb8
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW			    0x1ec0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH		    0x1ec4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4			    0x1ec8
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW			    0x1ed0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH		    0x1ed4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5			    0x1ed8
+
+/****************************************/
+/*   PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64460_PCI_0_CONFIG_ADDR				    0xcf8
+#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG			    0xcfc
+#define MV64460_PCI_1_CONFIG_ADDR				    0xc78
+#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG			    0xc7c
+#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xc34
+#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG		    0xcb4
+
+/****************************************/
+/*   PCI Error Report Registers		*/
+/****************************************/
+
+#define MV64460_PCI_0_SERR_MASK					    0xc28
+#define MV64460_PCI_1_SERR_MASK					    0xca8
+#define MV64460_PCI_0_ERROR_ADDR_LOW				    0x1d40
+#define MV64460_PCI_1_ERROR_ADDR_LOW				    0x1dc0
+#define MV64460_PCI_0_ERROR_ADDR_HIGH				    0x1d44
+#define MV64460_PCI_1_ERROR_ADDR_HIGH				    0x1dc4
+#define MV64460_PCI_0_ERROR_ATTRIBUTE				    0x1d48
+#define MV64460_PCI_1_ERROR_ATTRIBUTE				    0x1dc8
+#define MV64460_PCI_0_ERROR_COMMAND				    0x1d50
+#define MV64460_PCI_1_ERROR_COMMAND				    0x1dd0
+#define MV64460_PCI_0_ERROR_CAUSE				    0x1d58
+#define MV64460_PCI_1_ERROR_CAUSE				    0x1dd8
+#define MV64460_PCI_0_ERROR_MASK				    0x1d5c
+#define MV64460_PCI_1_ERROR_MASK				    0x1ddc
+
+/****************************************/
+/*   PCI Debug Registers		*/
+/****************************************/
+
+#define MV64460_PCI_0_MMASK					    0X1D24
+#define MV64460_PCI_1_MMASK					    0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+#define MV64460_PCI_DEVICE_AND_VENDOR_ID			    0x000
+#define MV64460_PCI_STATUS_AND_COMMAND				    0x004
+#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
+#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE	    0x00C
+
+#define MV64460_PCI_SCS_0_BASE_ADDR_LOW				    0x010
+#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH			    0x014
+#define MV64460_PCI_SCS_1_BASE_ADDR_LOW				    0x018
+#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH			    0x01C
+#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW	    0x020
+#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH	    0x024
+#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
+#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
+#define MV64460_PCI_CAPABILTY_LIST_POINTER			    0x034
+#define MV64460_PCI_INTERRUPT_PIN_AND_LINE			    0x03C
+       /* capability list */
+#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
+#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
+#define MV64460_PCI_VPD_ADDR					    0x048
+#define MV64460_PCI_VPD_DATA					    0x04c
+#define MV64460_PCI_MSI_MESSAGE_CONTROL				    0x050
+#define MV64460_PCI_MSI_MESSAGE_ADDR				    0x054
+#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR			    0x058
+#define MV64460_PCI_MSI_MESSAGE_DATA				    0x05c
+#define MV64460_PCI_X_COMMAND					    0x060
+#define MV64460_PCI_X_STATUS					    0x064
+#define MV64460_PCI_COMPACT_PCI_HOT_SWAP			    0x068
+
+/***********************************************/
+/*   PCI Configuration, Function 1, Registers  */
+/***********************************************/
+
+#define MV64460_PCI_SCS_2_BASE_ADDR_LOW				    0x110
+#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
+#define MV64460_PCI_SCS_3_BASE_ADDR_LOW				    0x118
+#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
+#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW			    0x120
+#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH		    0x124
+
+/***********************************************/
+/*  PCI Configuration, Function 2, Registers   */
+/***********************************************/
+
+#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW			    0x210
+#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH			    0x214
+#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW			    0x218
+#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH			    0x21c
+#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW			    0x220
+#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH			    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 3, Registers   */
+/***********************************************/
+
+#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW			    0x310
+#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH			    0x314
+#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
+#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH			    0x31c
+#define MV64460_PCI_CPU_BASE_ADDR_LOW				    0x220
+#define MV64460_PCI_CPU_BASE_ADDR_HIGH				    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 4, Registers   */
+/***********************************************/
+
+#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW			    0x410
+#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH			    0x414
+#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW			    0x418
+#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH			    0x41c
+#define MV64460_PCI_P2P_I_O_BASE_ADDR				    0x420
+#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		    0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20)	*/
+/****************************************/
+
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x014
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x018
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE		    0x01C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE		    0x020
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x024
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE		    0x02C
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE	    0x030
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x034
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x040
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE	    0x044
+#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE		    0x050
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE		    0x054
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x060
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x064
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x068
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x06C
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE	    0x070
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE	    0x074
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE	    0x0F8
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE	    0x0FC
+
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x094
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x098
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE		    0x09C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0A0
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0A4
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE		    0x0AC
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE	    0x0B0
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0B4
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C0
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE	    0x0C4
+#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE		    0x0D0
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE		    0x0D4
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E0
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0E4
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x0E8
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x0EC
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE	    0x0F0
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE	    0x0F4
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE	    0x078
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE	    0x07C
+
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C14
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C18
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE		    0x1C1C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C20
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C24
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE		    0x1C2C
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE	    0x1C30
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C34
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C40
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE	    0x1C44
+#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE			    0x1C50
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE		    0x1C54
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C60
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C64
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1C68
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1C6C
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE	    0x1C70
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE	    0x1C74
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE	    0x1CF8
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE	    0x1CFC
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C94
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C98
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE		    0x1C9C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CA0
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CA4
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE		    0x1CAC
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE	    0x1CB0
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CB4
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC0
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE	    0x1CC4
+#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE			    0x1CD0
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE		    0x1CD4
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE0
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CE4
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1CE8
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1CEC
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE	    0x1CF0
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE	    0x1CF4
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE	    0x1C78
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE	    0x1C7C
+
+/****************************************/
+/*	  Ethernet Unit Registers		*/
+/****************************************/
+
+#define MV64460_ETH_PHY_ADDR_REG				    0x2000
+#define MV64460_ETH_SMI_REG					    0x2004
+#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG			    0x2008
+#define MV64460_ETH_UNIT_DEFAULTID_REG				    0x200c
+#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG			    0x2080
+#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG			    0x2084
+#define MV64460_ETH_UNIT_INTERNAL_USE_REG			    0x24fc
+#define MV64460_ETH_UNIT_ERROR_ADDR_REG				    0x2094
+#define MV64460_ETH_BAR_0					    0x2200
+#define MV64460_ETH_BAR_1					    0x2208
+#define MV64460_ETH_BAR_2					    0x2210
+#define MV64460_ETH_BAR_3					    0x2218
+#define MV64460_ETH_BAR_4					    0x2220
+#define MV64460_ETH_BAR_5					    0x2228
+#define MV64460_ETH_SIZE_REG_0					    0x2204
+#define MV64460_ETH_SIZE_REG_1					    0x220c
+#define MV64460_ETH_SIZE_REG_2					    0x2214
+#define MV64460_ETH_SIZE_REG_3					    0x221c
+#define MV64460_ETH_SIZE_REG_4					    0x2224
+#define MV64460_ETH_SIZE_REG_5					    0x222c
+#define MV64460_ETH_HEADERS_RETARGET_BASE_REG			    0x2230
+#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG		    0x2234
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0			    0x2280
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1			    0x2284
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2			    0x2288
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3			    0x228c
+#define MV64460_ETH_BASE_ADDR_ENABLE_REG			    0x2290
+#define MV64460_ETH_ACCESS_PROTECTION_REG(port)			   (0x2294 + (port<<2))
+#define MV64460_ETH_MIB_COUNTERS_BASE(port)			   (0x3000 + (port<<7))
+#define MV64460_ETH_PORT_CONFIG_REG(port)			   (0x2400 + (port<<10))
+#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port)		   (0x2404 + (port<<10))
+#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port)		   (0x2408 + (port<<10))
+#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port)		   (0x240c + (port<<10))
+#define MV64460_ETH_VLAN_ETHERTYPE_REG(port)			   (0x2410 + (port<<10))
+#define MV64460_ETH_MAC_ADDR_LOW(port)				   (0x2414 + (port<<10))
+#define MV64460_ETH_MAC_ADDR_HIGH(port)				   (0x2418 + (port<<10))
+#define MV64460_ETH_SDMA_CONFIG_REG(port)			   (0x241c + (port<<10))
+#define MV64460_ETH_DSCP_0(port)				   (0x2420 + (port<<10))
+#define MV64460_ETH_DSCP_1(port)				   (0x2424 + (port<<10))
+#define MV64460_ETH_DSCP_2(port)				   (0x2428 + (port<<10))
+#define MV64460_ETH_DSCP_3(port)				   (0x242c + (port<<10))
+#define MV64460_ETH_DSCP_4(port)				   (0x2430 + (port<<10))
+#define MV64460_ETH_DSCP_5(port)				   (0x2434 + (port<<10))
+#define MV64460_ETH_DSCP_6(port)				   (0x2438 + (port<<10))
+#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port)		   (0x243c + (port<<10))
+#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		   (0x2440 + (port<<10))
+#define MV64460_ETH_PORT_STATUS_REG(port)			   (0x2444 + (port<<10))
+#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port)		   (0x2448 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port)		   (0x244c + (port<<10))
+#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
+#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port)			   (0x2458 + (port<<10))
+#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
+#define MV64460_ETH_INTERRUPT_CAUSE_REG(port)			   (0x2460 + (port<<10))
+#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		   (0x2464 + (port<<10))
+#define MV64460_ETH_INTERRUPT_MASK_REG(port)			   (0x2468 + (port<<10))
+#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port)		   (0x246c + (port<<10))
+#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2470 + (port<<10))
+#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)		   (0x2474 + (port<<10))
+#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		   (0x247c + (port<<10))
+#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port)		   (0x2484 + (port<<10)
+#define MV64460_ETH_PORT_DEBUG_0_REG(port)			   (0x248c + (port<<10))
+#define MV64460_ETH_PORT_DEBUG_1_REG(port)			   (0x2490 + (port<<10))
+#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)		   (0x2494 + (port<<10))
+#define MV64460_ETH_INTERNAL_USE_REG(port)			   (0x24fc + (port<<10))
+#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port)		   (0x2680 + (port<<10))
+#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port)		   (0x2684 + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x260c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x261c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x262c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x263c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x264c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x265c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x266c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x267c + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)		   (0x26c0 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)		   (0x26c4 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)		   (0x26c8 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		   (0x26cc + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		   (0x26d0 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		   (0x26d4 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		   (0x26d8 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		   (0x26dc + (port<<10))
+#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		   (0x2708 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		   (0x2718 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		   (0x2728 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		   (0x2738 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		   (0x2748 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		   (0x2758 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		   (0x2768 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		   (0x2778 + (port<<10))
+#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		   (0x2780 + (port<<10))
+#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
+#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
+#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		   (0x3600 + (port<<10))
+
+/*******************************************/
+/*	    CUNIT  Registers		   */
+/*******************************************/
+
+	 /* Address Decoding Register Map */
+
+#define MV64460_CUNIT_BASE_ADDR_REG0				    0xf200
+#define MV64460_CUNIT_BASE_ADDR_REG1				    0xf208
+#define MV64460_CUNIT_BASE_ADDR_REG2				    0xf210
+#define MV64460_CUNIT_BASE_ADDR_REG3				    0xf218
+#define MV64460_CUNIT_SIZE0					    0xf204
+#define MV64460_CUNIT_SIZE1					    0xf20c
+#define MV64460_CUNIT_SIZE2					    0xf214
+#define MV64460_CUNIT_SIZE3					    0xf21c
+#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0			    0xf240
+#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1			    0xf244
+#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG			    0xf250
+#define MV64460_MPSC0_ACCESS_PROTECTION_REG			    0xf254
+#define MV64460_MPSC1_ACCESS_PROTECTION_REG			    0xf258
+#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG		    0xf25C
+
+	/*  Error Report Registers  */
+
+#define MV64460_CUNIT_INTERRUPT_CAUSE_REG			    0xf310
+#define MV64460_CUNIT_INTERRUPT_MASK_REG			    0xf314
+#define MV64460_CUNIT_ERROR_ADDR				    0xf318
+
+	/*  Cunit Control Registers */
+
+#define MV64460_CUNIT_ARBITER_CONTROL_REG			    0xf300
+#define MV64460_CUNIT_CONFIG_REG				    0xb40c
+#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG			    0xf304
+
+	/*  Cunit Debug Registers   */
+
+#define MV64460_CUNIT_DEBUG_LOW					    0xf340
+#define MV64460_CUNIT_DEBUG_HIGH				    0xf344
+#define MV64460_CUNIT_MMASK					    0xf380
+
+	/*  Cunit Base Address Enable Window Bits*/
+#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT			 0x0
+#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT			 0x1
+#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT			 0x2
+#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT			 0x3
+
+	/*  MPSCs Clocks Routing Registers  */
+
+#define MV64460_MPSC_ROUTING_REG				    0xb400
+#define MV64460_MPSC_RX_CLOCK_ROUTING_REG			    0xb404
+#define MV64460_MPSC_TX_CLOCK_ROUTING_REG			    0xb408
+
+	/*  MPSCs Interrupts Registers	  */
+
+#define MV64460_MPSC_CAUSE_REG(port)				   (0xb804 + (port<<3))
+#define MV64460_MPSC_MASK_REG(port)				   (0xb884 + (port<<3))
+
+#define MV64460_MPSC_MAIN_CONFIG_LOW(port)			   (0x8000 + (port<<12))
+#define MV64460_MPSC_MAIN_CONFIG_HIGH(port)			   (0x8004 + (port<<12))
+#define MV64460_MPSC_PROTOCOL_CONFIG(port)			   (0x8008 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG1(port)				   (0x800c + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG2(port)				   (0x8010 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG3(port)				   (0x8014 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG4(port)				   (0x8018 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG5(port)				   (0x801c + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG6(port)				   (0x8020 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG7(port)				   (0x8024 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG8(port)				   (0x8028 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG9(port)				   (0x802c + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG10(port)			   (0x8030 + (port<<12))
+
+	/*  MPSC0 Registers	 */
+
+
+/***************************************/
+/*	    SDMA Registers	       */
+/***************************************/
+
+#define MV64460_SDMA_CONFIG_REG(channel)			(0x4000 + (channel<<13))
+#define MV64460_SDMA_COMMAND_REG(channel)			(0x4008 + (channel<<13))
+#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)	(0x4810 + (channel<<13))
+#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
+#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
+
+#define MV64460_SDMA_CAUSE_REG					    0xb800
+#define MV64460_SDMA_MASK_REG					    0xb880
+
+
+/****************************************/
+/* SDMA Address Space Targets		*/
+/****************************************/
+
+#define MV64460_SDMA_DRAM_CS_0_TARGET				    0x0e00
+#define MV64460_SDMA_DRAM_CS_1_TARGET				    0x0d00
+#define MV64460_SDMA_DRAM_CS_2_TARGET				    0x0b00
+#define MV64460_SDMA_DRAM_CS_3_TARGET				    0x0700
+
+#define MV64460_SDMA_DEV_CS_0_TARGET				    0x1e01
+#define MV64460_SDMA_DEV_CS_1_TARGET				    0x1d01
+#define MV64460_SDMA_DEV_CS_2_TARGET				    0x1b01
+#define MV64460_SDMA_DEV_CS_3_TARGET				    0x1701
+
+#define MV64460_SDMA_BOOT_CS_TARGET				    0x0f00
+
+#define MV64460_SDMA_SRAM_TARGET				    0x0003
+#define MV64460_SDMA_60X_BUS_TARGET				    0x4003
+
+#define MV64460_PCI_0_TARGET					    0x0003
+#define MV64460_PCI_1_TARGET					    0x0004
+
+
+/* Devices BAR and size registers */
+
+#define MV64460_DEV_CS0_BASE_ADDR				    0x028
+#define MV64460_DEV_CS0_SIZE					    0x030
+#define MV64460_DEV_CS1_BASE_ADDR				    0x228
+#define MV64460_DEV_CS1_SIZE					    0x230
+#define MV64460_DEV_CS2_BASE_ADDR				    0x248
+#define MV64460_DEV_CS2_SIZE					    0x250
+#define MV64460_DEV_CS3_BASE_ADDR				    0x038
+#define MV64460_DEV_CS3_SIZE					    0x040
+#define MV64460_BOOTCS_BASE_ADDR				    0x238
+#define MV64460_BOOTCS_SIZE					    0x240
+
+/* SDMA Window access protection */
+#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0
+#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1
+#define MV64460_SDMA_WIN_ACCESS_FULL 2
+
+/* BRG Interrupts */
+
+#define MV64460_BRG_CONFIG_REG(brg)				 (0xb200 + (brg<<3))
+#define MV64460_BRG_BAUDE_TUNING_REG(brg)			 (0xb204 + (brg<<3))
+#define MV64460_BRG_CAUSE_REG					    0xb834
+#define MV64460_BRG_MASK_REG					    0xb8b4
+
+/****************************************/
+/* DMA Channel Control			*/
+/****************************************/
+
+#define MV64460_DMA_CHANNEL0_CONTROL				    0x840
+#define MV64460_DMA_CHANNEL0_CONTROL_HIGH			    0x880
+#define MV64460_DMA_CHANNEL1_CONTROL				    0x844
+#define MV64460_DMA_CHANNEL1_CONTROL_HIGH			    0x884
+#define MV64460_DMA_CHANNEL2_CONTROL				    0x848
+#define MV64460_DMA_CHANNEL2_CONTROL_HIGH			    0x888
+#define MV64460_DMA_CHANNEL3_CONTROL				    0x84C
+#define MV64460_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
+
+
+/****************************************/
+/*	     IDMA Registers		*/
+/****************************************/
+
+#define MV64460_DMA_CHANNEL0_BYTE_COUNT				    0x800
+#define MV64460_DMA_CHANNEL1_BYTE_COUNT				    0x804
+#define MV64460_DMA_CHANNEL2_BYTE_COUNT				    0x808
+#define MV64460_DMA_CHANNEL3_BYTE_COUNT				    0x80C
+#define MV64460_DMA_CHANNEL0_SOURCE_ADDR			    0x810
+#define MV64460_DMA_CHANNEL1_SOURCE_ADDR			    0x814
+#define MV64460_DMA_CHANNEL2_SOURCE_ADDR			    0x818
+#define MV64460_DMA_CHANNEL3_SOURCE_ADDR			    0x81c
+#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR			    0x820
+#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR			    0x824
+#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR			    0x828
+#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR			    0x82C
+#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		    0x830
+#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		    0x834
+#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		    0x838
+#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		    0x83C
+#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		    0x870
+#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		    0x874
+#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		    0x878
+#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		    0x87C
+
+ /*  IDMA Address Decoding Base Address Registers  */
+
+#define MV64460_DMA_BASE_ADDR_REG0				    0xa00
+#define MV64460_DMA_BASE_ADDR_REG1				    0xa08
+#define MV64460_DMA_BASE_ADDR_REG2				    0xa10
+#define MV64460_DMA_BASE_ADDR_REG3				    0xa18
+#define MV64460_DMA_BASE_ADDR_REG4				    0xa20
+#define MV64460_DMA_BASE_ADDR_REG5				    0xa28
+#define MV64460_DMA_BASE_ADDR_REG6				    0xa30
+#define MV64460_DMA_BASE_ADDR_REG7				    0xa38
+
+ /*  IDMA Address Decoding Size Address Register   */
+
+#define MV64460_DMA_SIZE_REG0					    0xa04
+#define MV64460_DMA_SIZE_REG1					    0xa0c
+#define MV64460_DMA_SIZE_REG2					    0xa14
+#define MV64460_DMA_SIZE_REG3					    0xa1c
+#define MV64460_DMA_SIZE_REG4					    0xa24
+#define MV64460_DMA_SIZE_REG5					    0xa2c
+#define MV64460_DMA_SIZE_REG6					    0xa34
+#define MV64460_DMA_SIZE_REG7					    0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access
+		  Protection Registers			  */
+
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG0			    0xa60
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG1			    0xa64
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG2			    0xa68
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG3			    0xa6C
+#define MV64460_DMA_BASE_ADDR_ENABLE_REG			    0xa80
+#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG		    0xa70
+#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG		    0xa74
+#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG		    0xa78
+#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG		    0xa7c
+#define MV64460_DMA_ARBITER_CONTROL				    0x860
+#define MV64460_DMA_CROSS_BAR_TIMEOUT				    0x8d0
+
+ /*  IDMA Headers Retarget Registers   */
+
+#define MV64460_DMA_HEADERS_RETARGET_CONTROL			    0xa84
+#define MV64460_DMA_HEADERS_RETARGET_BASE			    0xa88
+
+ /*  IDMA Interrupt Register  */
+
+#define MV64460_DMA_INTERRUPT_CAUSE_REG				    0x8c0
+#define MV64460_DMA_INTERRUPT_CAUSE_MASK			    0x8c4
+#define MV64460_DMA_ERROR_ADDR					    0x8c8
+#define MV64460_DMA_ERROR_SELECT				    0x8cc
+
+ /*  IDMA Debug Register ( for internal use )	 */
+
+#define MV64460_DMA_DEBUG_LOW					    0x8e0
+#define MV64460_DMA_DEBUG_HIGH					    0x8e4
+#define MV64460_DMA_SPARE					    0xA8C
+
+/****************************************/
+/* Timer_Counter			*/
+/****************************************/
+
+#define MV64460_TIMER_COUNTER0					    0x850
+#define MV64460_TIMER_COUNTER1					    0x854
+#define MV64460_TIMER_COUNTER2					    0x858
+#define MV64460_TIMER_COUNTER3					    0x85C
+#define MV64460_TIMER_COUNTER_0_3_CONTROL			    0x864
+#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
+#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK		    0x86c
+
+/****************************************/
+/*	   Watchdog registers		*/
+/****************************************/
+
+#define MV64460_WATCHDOG_CONFIG_REG				    0xb410
+#define MV64460_WATCHDOG_VALUE_REG				    0xb414
+
+/****************************************/
+/* I2C Registers			*/
+/****************************************/
+
+#define MV64460_I2C_SLAVE_ADDR					    0xc000
+#define MV64460_I2C_EXTENDED_SLAVE_ADDR				    0xc010
+#define MV64460_I2C_DATA					    0xc004
+#define MV64460_I2C_CONTROL					    0xc008
+#define MV64460_I2C_STATUS_BAUDE_RATE				    0xc00C
+#define MV64460_I2C_SOFT_RESET					    0xc01c
+
+/****************************************/
+/* GPP Interface Registers		*/
+/****************************************/
+
+#define MV64460_GPP_IO_CONTROL					    0xf100
+#define MV64460_GPP_LEVEL_CONTROL				    0xf110
+#define MV64460_GPP_VALUE					    0xf104
+#define MV64460_GPP_INTERRUPT_CAUSE				    0xf108
+#define MV64460_GPP_INTERRUPT_MASK0				    0xf10c
+#define MV64460_GPP_INTERRUPT_MASK1				    0xf114
+#define MV64460_GPP_VALUE_SET					    0xf118
+#define MV64460_GPP_VALUE_CLEAR					    0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers	*/
+/****************************************/
+
+/****************************************/
+/* Interrupts				*/
+/****************************************/
+
+#define MV64460_MAIN_INTERRUPT_CAUSE_LOW			    0x004
+#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH			    0x00c
+#define MV64460_CPU_INTERRUPT0_MASK_LOW				    0x014
+#define MV64460_CPU_INTERRUPT0_MASK_HIGH			    0x01c
+#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE			    0x024
+#define MV64460_CPU_INTERRUPT1_MASK_LOW				    0x034
+#define MV64460_CPU_INTERRUPT1_MASK_HIGH			    0x03c
+#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE			    0x044
+#define MV64460_INTERRUPT0_MASK_0_LOW				    0x054
+#define MV64460_INTERRUPT0_MASK_0_HIGH				    0x05c
+#define MV64460_INTERRUPT0_SELECT_CAUSE				    0x064
+#define MV64460_INTERRUPT1_MASK_0_LOW				    0x074
+#define MV64460_INTERRUPT1_MASK_0_HIGH				    0x07c
+#define MV64460_INTERRUPT1_SELECT_CAUSE				    0x084
+
+/****************************************/
+/*	MPP Interface Registers		*/
+/****************************************/
+
+#define MV64460_MPP_CONTROL0					    0xf000
+#define MV64460_MPP_CONTROL1					    0xf004
+#define MV64460_MPP_CONTROL2					    0xf008
+#define MV64460_MPP_CONTROL3					    0xf00c
+
+/****************************************/
+/*    Serial Initialization registers	*/
+/****************************************/
+
+#define MV64460_SERIAL_INIT_LAST_DATA				    0xf324
+#define MV64460_SERIAL_INIT_CONTROL				    0xf328
+#define MV64460_SERIAL_INIT_STATUS				    0xf32c
+
+
+#endif /* __INCgt64460rh */
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
new file mode 100644
index 0000000000..5637284124
--- /dev/null
+++ b/board/Marvell/db64460/pci.c
@@ -0,0 +1,940 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* PCI.c - PCI functions */
+
+
+#include <common.h>
+#include <pci.h>
+
+#include "../include/pci.h"
+
+#undef DEBUG
+#undef IDE_SET_NATIVE_MODE
+static unsigned int local_buses[] = { 0, 0 };
+
+static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
+	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+};
+
+
+#ifdef DEBUG
+static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
+static void gt_pci_bus_mode_display (PCI_HOST host)
+{
+	unsigned int mode;
+
+
+	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
+	switch (mode) {
+	case 0:
+		printf ("PCI %d bus mode: Conventional PCI\n", host);
+		break;
+	case 1:
+		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		break;
+	case 2:
+		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		break;
+	case 3:
+		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		break;
+	default:
+		printf ("Unknown BUS %d\n", mode);
+	}
+}
+#endif
+
+static const unsigned int pci_p2p_configuration_reg[] = {
+	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+static const unsigned int pci_configuration_address[] = {
+	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
+};
+
+static const unsigned int pci_configuration_data[] = {
+	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
+	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
+};
+
+static const unsigned int pci_error_cause_reg[] = {
+	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
+};
+
+static const unsigned int pci_arbiter_control[] = {
+	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
+};
+
+static const unsigned int pci_address_space_en[] = {
+	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
+};
+
+static const unsigned int pci_snoop_control_base_0_low[] = {
+	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_snoop_control_top_0[] = {
+	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
+};
+
+static const unsigned int pci_access_control_base_0_low[] = {
+	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_access_control_top_0[] = {
+	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
+};
+
+static const unsigned int pci_scs_bank_size[2][4] = {
+	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
+	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
+	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
+	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
+};
+
+static const unsigned int pci_p2p_configuration[] = {
+	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+
+/********************************************************************
+* pciWriteConfigReg - Write to a PCI configuration register
+*                    - Make sure the GT is configured as a master before writing
+*                      to another device on the PCI.
+*                    - The function takes care of Big/Little endian conversion.
+*
+*
+* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
+*                   (or any other PCI device spec)
+*           pciDevNum: The device number needs to be addressed.
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|00|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*********************************************************************/
+void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
+			unsigned int pciDevNum, unsigned int data)
+{
+	volatile unsigned int DataForAddrReg;
+	unsigned int functionNum;
+	unsigned int busNum = 0;
+	unsigned int addr;
+
+	if (pciDevNum > 32)	/* illegal device Number */
+		return;
+	if (pciDevNum == SELF) {	/* configure our configuration space. */
+		pciDevNum =
+			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+			0x1f;
+		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+			0xff0000;
+	}
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xfc;
+	DataForAddrReg =
+		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
+	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+	GT_REG_READ (pci_configuration_address[host], &addr);
+	if (addr != DataForAddrReg)
+		return;
+	GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+/********************************************************************
+* pciReadConfigReg  - Read from a PCI0 configuration register
+*                    - Make sure the GT is configured as a master before reading
+*                     from another device on the PCI.
+*                   - The function takes care of Big/Little endian conversion.
+* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
+*                        spec)
+*           pciDevNum: The device number needs to be addressed.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+*                 cause register to make sure the data is valid
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|00|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*********************************************************************/
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+			       unsigned int pciDevNum)
+{
+	volatile unsigned int DataForAddrReg;
+	unsigned int data;
+	unsigned int functionNum;
+	unsigned int busNum = 0;
+
+	if (pciDevNum > 32)	/* illegal device Number */
+		return 0xffffffff;
+	if (pciDevNum == SELF) {	/* configure our configuration space. */
+		pciDevNum =
+			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+			0x1f;
+		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+			0xff0000;
+	}
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xfc;
+	DataForAddrReg =
+		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
+	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+	GT_REG_READ (pci_configuration_address[host], &data);
+	if (data != DataForAddrReg)
+		return 0xffffffff;
+	GT_REG_READ (pci_configuration_data[host], &data);
+	return data;
+}
+
+/********************************************************************
+* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
+*                               the agent is placed on another Bus. For more
+*                               information read P2P in the PCI spec.
+*
+* Inputs:   unsigned int regOffset - The register offset as it apears in the
+*           GT spec (or any other PCI device spec).
+*           unsigned int pciDevNum - The device number needs to be addressed.
+*           unsigned int busNum - On which bus does the Target agent connect
+*                                 to.
+*           unsigned int data - data to be written.
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|01|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
+*   PCI spec referring to P2P.
+*
+*********************************************************************/
+void pciOverBridgeWriteConfigReg (PCI_HOST host,
+				  unsigned int regOffset,
+				  unsigned int pciDevNum,
+				  unsigned int busNum, unsigned int data)
+{
+	unsigned int DataForReg;
+	unsigned int functionNum;
+
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xff;
+	busNum = busNum << 16;
+	if (pciDevNum == SELF) {	/* This board */
+		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
+	} else {
+		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+			BIT31 | BIT0;
+	}
+	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+	GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+
+/********************************************************************
+* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
+*                               the agent target locate on another PCI bus.
+*                             - Make sure the GT is configured as a master
+*                               before reading from another device on the PCI.
+*                             - The function takes care of Big/Little endian
+*                               conversion.
+* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
+*                        spec). (configuration register offset.)
+*           pciDevNum: The device number needs to be addressed.
+*           busNum: the Bus number where the agent is place.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+*                 cause register to make sure the data is valid
+*
+*  Configuration Address 0xCF8:
+*
+*       31 30    24 23  16 15  11 10     8 7      2  0     <=bit Number
+*  |congif|Reserved|  Bus |Device|Function|Register|01|
+*  |Enable|        |Number|Number| Number | Number |  |    <=field Name
+*
+*********************************************************************/
+unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
+					 unsigned int regOffset,
+					 unsigned int pciDevNum,
+					 unsigned int busNum)
+{
+	unsigned int DataForReg;
+	unsigned int data;
+	unsigned int functionNum;
+
+	functionNum = regOffset & 0x00000700;
+	pciDevNum = pciDevNum << 11;
+	regOffset = regOffset & 0xff;
+	busNum = busNum << 16;
+	if (pciDevNum == SELF) {	/* This board */
+		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
+	} else {		/* agent on another bus */
+
+		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+			BIT0 | BIT31;
+	}
+	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+	GT_REG_READ (pci_configuration_data[host], &data);
+	return data;
+}
+
+
+/********************************************************************
+* pciGetRegOffset - Gets the register offset for this region config.
+*
+* INPUT:   Bus, Region - The bus and region we ask for its base address.
+* OUTPUT:   N/A
+* RETURNS: PCI register base address
+*********************************************************************/
+static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
+{
+	switch (host) {
+	case PCI_HOST0:
+		switch (region) {
+		case PCI_IO:
+			return PCI_0I_O_LOW_DECODE_ADDRESS;
+		case PCI_REGION0:
+			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+		case PCI_REGION1:
+			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
+		case PCI_REGION2:
+			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
+		case PCI_REGION3:
+			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
+		}
+	case PCI_HOST1:
+		switch (region) {
+		case PCI_IO:
+			return PCI_1I_O_LOW_DECODE_ADDRESS;
+		case PCI_REGION0:
+			return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
+		case PCI_REGION1:
+			return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
+		case PCI_REGION2:
+			return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
+		case PCI_REGION3:
+			return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
+		}
+	}
+	return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+}
+
+static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
+{
+	switch (host) {
+	case PCI_HOST0:
+		switch (region) {
+		case PCI_IO:
+			return PCI_0I_O_ADDRESS_REMAP;
+		case PCI_REGION0:
+			return PCI_0MEMORY0_ADDRESS_REMAP;
+		case PCI_REGION1:
+			return PCI_0MEMORY1_ADDRESS_REMAP;
+		case PCI_REGION2:
+			return PCI_0MEMORY2_ADDRESS_REMAP;
+		case PCI_REGION3:
+			return PCI_0MEMORY3_ADDRESS_REMAP;
+		}
+	case PCI_HOST1:
+		switch (region) {
+		case PCI_IO:
+			return PCI_1I_O_ADDRESS_REMAP;
+		case PCI_REGION0:
+			return PCI_1MEMORY0_ADDRESS_REMAP;
+		case PCI_REGION1:
+			return PCI_1MEMORY1_ADDRESS_REMAP;
+		case PCI_REGION2:
+			return PCI_1MEMORY2_ADDRESS_REMAP;
+		case PCI_REGION3:
+			return PCI_1MEMORY3_ADDRESS_REMAP;
+		}
+	}
+	return PCI_0MEMORY0_ADDRESS_REMAP;
+}
+
+/********************************************************************
+* pciGetBaseAddress - Gets the base address of a PCI.
+*           - If the PCI size is 0 then this base address has no meaning!!!
+*
+*
+* INPUT:   Bus, Region - The bus and region we ask for its base address.
+* OUTPUT:   N/A
+* RETURNS: PCI base address.
+*********************************************************************/
+unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
+{
+	unsigned int regBase;
+	unsigned int regEnd;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+
+	GT_REG_READ (regOffset, &regBase);
+	GT_REG_READ (regOffset + 8, &regEnd);
+
+	if (regEnd <= regBase)
+		return 0xffffffff;	/* ERROR !!! */
+
+	regBase = regBase << 16;
+	return regBase;
+}
+
+bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
+		  unsigned int bankBase, unsigned int bankLength)
+{
+	unsigned int low = 0xfff;
+	unsigned int high = 0x0;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+	unsigned int remapOffset = pciGetRemapOffset (host, region);
+
+	if (bankLength != 0) {
+		low = (bankBase >> 16) & 0xffff;
+		high = ((bankBase + bankLength) >> 16) - 1;
+	}
+
+	GT_REG_WRITE (regOffset, low | (1 << 24));	/* no swapping */
+	GT_REG_WRITE (regOffset + 8, high);
+
+	if (bankLength != 0) {	/* must do AFTER writing maps */
+		GT_REG_WRITE (remapOffset, remapBase >> 16);	/* sorry, 32 bits only.
+								   dont support upper 32
+								   in this driver */
+	}
+	return true;
+}
+
+unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
+{
+	unsigned int low;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+
+	GT_REG_READ (regOffset, &low);
+	return (low & 0xffff) << 16;
+}
+
+unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
+{
+	unsigned int low, high;
+	unsigned int regOffset = pciGetRegOffset (host, region);
+
+	GT_REG_READ (regOffset, &low);
+	GT_REG_READ (regOffset + 8, &high);
+	return ((high & 0xffff) + 1) << 16;
+}
+
+
+/* ronen - 7/Dec/03*/
+/********************************************************************
+* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
+* Inputs: one of the PCI BAR
+*********************************************************************/
+void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+	RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+	SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+/********************************************************************
+* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
+*
+* Inputs: base and size of PCI SCS
+*********************************************************************/
+void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
+		       unsigned int pciDramBase, unsigned int pciDramSize)
+{
+	/*ronen different function for 3rd bank. */
+	unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
+
+	pciDramBase = pciDramBase & 0xfffff000;
+	pciDramBase = pciDramBase | (pciReadConfigReg (host,
+						       PCI_SCS_0_BASE_ADDRESS
+						       + offset,
+						       SELF) & 0x00000fff);
+	pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
+			   pciDramBase);
+	if (pciDramSize == 0)
+		pciDramSize++;
+	GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
+	gtPciEnableInternalBAR (host, bank);
+}
+
+/********************************************************************
+* pciSetRegionFeatures - This function modifys one of the 8 regions with
+*                         feature bits given as an input.
+*                       - Be advised to check the spec before modifying them.
+* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
+*         unsigned int features - See file: pci.h there are defintion for those
+*                                 region features.
+*         unsigned int baseAddress - The region base Address.
+*         unsigned int topAddress - The region top Address.
+* Returns: false if one of the parameters is erroneous true otherwise.
+*********************************************************************/
+bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
+			   unsigned int features, unsigned int baseAddress,
+			   unsigned int regionLength)
+{
+	unsigned int accessLow;
+	unsigned int accessHigh;
+	unsigned int accessTop = baseAddress + regionLength;
+
+	if (regionLength == 0) {	/* close the region. */
+		pciDisableAccessRegion (host, region);
+		return true;
+	}
+	/* base Address is store is bits [11:0] */
+	accessLow = (baseAddress & 0xfff00000) >> 20;
+	/* All the features are update according to the defines in pci.h (to be on
+	   the safe side we disable bits: [11:0] */
+	accessLow = accessLow | (features & 0xfffff000);
+	/* write to the Low Access Region register */
+	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+		      accessLow);
+
+	accessHigh = (accessTop & 0xfff00000) >> 20;
+
+	/* write to the High Access Region register */
+	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
+		      accessHigh - 1);
+	return true;
+}
+
+/********************************************************************
+* pciDisableAccessRegion - Disable The given Region by writing MAX size
+*                           to its low Address and MIN size to its high Address.
+*
+* Inputs:   PCI_ACCESS_REGIONS region - The region we to be Disabled.
+* Returns:  N/A.
+*********************************************************************/
+void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
+{
+	/* writing back the registers default values. */
+	GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+		      0x01001fff);
+	GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
+}
+
+/********************************************************************
+* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
+*
+* Inputs:   N/A
+* Returns:  true.
+*********************************************************************/
+bool pciArbiterEnable (PCI_HOST host)
+{
+	unsigned int regData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
+	return true;
+}
+
+/********************************************************************
+* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
+*
+* Inputs:   N/A
+* Returns:  true
+*********************************************************************/
+bool pciArbiterDisable (PCI_HOST host)
+{
+	unsigned int regData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
+	return true;
+}
+
+/********************************************************************
+* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
+*
+* Inputs:   PCI_AGENT_PRIO internalAgent - priotity for internal agent.
+*           PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
+*           PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
+*           PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
+*           PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
+*           PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
+*           PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
+* Returns:  true
+*********************************************************************/
+bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
+				  PCI_AGENT_PRIO externalAgent0,
+				  PCI_AGENT_PRIO externalAgent1,
+				  PCI_AGENT_PRIO externalAgent2,
+				  PCI_AGENT_PRIO externalAgent3,
+				  PCI_AGENT_PRIO externalAgent4,
+				  PCI_AGENT_PRIO externalAgent5)
+{
+	unsigned int regData;
+	unsigned int writeData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	writeData = (internalAgent << 7) + (externalAgent0 << 8) +
+		(externalAgent1 << 9) + (externalAgent2 << 10) +
+		(externalAgent3 << 11) + (externalAgent4 << 12) +
+		(externalAgent5 << 13);
+	regData = (regData & 0xffffc07f) | writeData;
+	GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
+	return true;
+}
+
+/********************************************************************
+* pciParkingDisable - Park on last option disable, with this function you can
+*                      disable the park on last mechanism for each agent.
+*                      disabling this option for all agents results parking
+*                      on the internal master.
+*
+* Inputs: PCI_AGENT_PARK internalAgent -  parking Disable for internal agent.
+*         PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
+*         PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
+*         PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
+*         PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
+*         PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
+*         PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
+* Returns:  true
+*********************************************************************/
+bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
+			PCI_AGENT_PARK externalAgent0,
+			PCI_AGENT_PARK externalAgent1,
+			PCI_AGENT_PARK externalAgent2,
+			PCI_AGENT_PARK externalAgent3,
+			PCI_AGENT_PARK externalAgent4,
+			PCI_AGENT_PARK externalAgent5)
+{
+	unsigned int regData;
+	unsigned int writeData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	writeData = (internalAgent << 14) + (externalAgent0 << 15) +
+		(externalAgent1 << 16) + (externalAgent2 << 17) +
+		(externalAgent3 << 18) + (externalAgent4 << 19) +
+		(externalAgent5 << 20);
+	regData = (regData & ~(0x7f << 14)) | writeData;
+	GT_REG_WRITE (pci_arbiter_control[host], regData);
+	return true;
+}
+
+/********************************************************************
+* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
+*                       respond to grant assertion within a window specified in
+*                       the input value: 'brokenValue'.
+*
+* Inputs: unsigned char brokenValue -  A value which limits the Master to hold the
+*                       grant without asserting frame.
+* Returns:  Error for illegal broken value otherwise true.
+*********************************************************************/
+bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
+{
+	unsigned int data;
+	unsigned int regData;
+
+	if (brokenValue > 0xf)
+		return false;	/* brokenValue must be 4 bit */
+	data = brokenValue << 3;
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	regData = (regData & 0xffffff87) | data;
+	GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
+	return true;
+}
+
+/********************************************************************
+* pciDisableBrokenAgentDetection - This function disable the Broken agent
+*                           Detection mechanism.
+*                           NOTE: This operation may cause a dead lock on the
+*                           pci0 arbitration.
+*
+* Inputs:   N/A
+* Returns:  true.
+*********************************************************************/
+bool pciDisableBrokenAgentDetection (PCI_HOST host)
+{
+	unsigned int regData;
+
+	GT_REG_READ (pci_arbiter_control[host], &regData);
+	regData = regData & 0xfffffffd;
+	GT_REG_WRITE (pci_arbiter_control[host], regData);
+	return true;
+}
+
+/********************************************************************
+* pciP2PConfig - This function set the PCI_n P2P configurate.
+*                 For more information on the P2P read PCI spec.
+*
+* Inputs:  unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
+*                                      Boundry.
+*          unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
+*                                      Boundry.
+*          unsigned int busNum - The CPI bus number to which the PCI interface
+*                                      is connected.
+*          unsigned int devNum - The PCI interface's device number.
+*
+* Returns:  true.
+*********************************************************************/
+bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
+		   unsigned int SecondBusHigh,
+		   unsigned int busNum, unsigned int devNum)
+{
+	unsigned int regData;
+
+	regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
+		((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
+	GT_REG_WRITE (pci_p2p_configuration[host], regData);
+	return true;
+}
+
+/********************************************************************
+* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
+*                          supports Cache Coherency in the PCI_n interface.
+* Inputs: region - One of the four regions.
+*         snoopType - There is four optional Types:
+*                        1. No Snoop.
+*                        2. Snoop to WT region.
+*                        3. Snoop to WB region.
+*                        4. Snoop & Invalidate to WB region.
+*         baseAddress - Base Address of this region.
+*         regionLength - Region length.
+* Returns: false if one of the parameters is wrong otherwise return true.
+*********************************************************************/
+bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
+			    PCI_SNOOP_TYPE snoopType,
+			    unsigned int baseAddress,
+			    unsigned int regionLength)
+{
+	unsigned int snoopXbaseAddress;
+	unsigned int snoopXtopAddress;
+	unsigned int data;
+	unsigned int snoopHigh = baseAddress + regionLength;
+
+	if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
+		return false;
+	snoopXbaseAddress =
+		pci_snoop_control_base_0_low[host] + 0x10 * region;
+	snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
+	if (regionLength == 0) {	/* closing the region */
+		GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
+		GT_REG_WRITE (snoopXtopAddress, 0);
+		return true;
+	}
+	baseAddress = baseAddress & 0xfff00000;	/* Granularity of 1MByte */
+	data = (baseAddress >> 20) | snoopType << 12;
+	GT_REG_WRITE (snoopXbaseAddress, data);
+	snoopHigh = (snoopHigh & 0xfff00000) >> 20;
+	GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
+	return true;
+}
+
+static int gt_read_config_dword (struct pci_controller *hose,
+				 pci_dev_t dev, int offset, u32 * value)
+{
+	int bus = PCI_BUS (dev);
+
+	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+					   PCI_DEV (dev));
+	} else {
+		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
+						     cfg_addr, offset,
+						     PCI_DEV (dev), bus);
+	}
+
+	return 0;
+}
+
+static int gt_write_config_dword (struct pci_controller *hose,
+				  pci_dev_t dev, int offset, u32 value)
+{
+	int bus = PCI_BUS (dev);
+
+	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+				   PCI_DEV (dev), value);
+	} else {
+		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+					     offset, PCI_DEV (dev), bus,
+					     value);
+	}
+	return 0;
+}
+
+
+static void gt_setup_ide (struct pci_controller *hose,
+			  pci_dev_t dev, struct pci_config_table *entry)
+{
+	static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
+	u32 bar_response, bar_value;
+	int bar;
+
+	for (bar = 0; bar < 6; bar++) {
+		/*ronen different function for 3rd bank. */
+		unsigned int offset =
+			(bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
+
+		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
+					0x0);
+		pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
+				       &bar_response);
+
+		pciauto_region_allocate (bar_response &
+					 PCI_BASE_ADDRESS_SPACE_IO ? hose->
+					 pci_io : hose->pci_mem, ide_bar[bar],
+					 &bar_value);
+
+		pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
+					bar_value);
+	}
+}
+
+
+/* TODO BJW: Change this for DB64360. This was pulled from the EV64260  */
+/* and is curently not called *. */
+#if 0
+static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char pin, irq;
+
+	pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
+
+	if (pin == 1) {		/* only allow INT A */
+		irq = pci_irq_swizzle[(PCI_HOST) hose->
+				      cfg_addr][PCI_DEV (dev)];
+		if (irq)
+			pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
+	}
+}
+#endif
+
+struct pci_config_table gt_config_table[] = {
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
+
+	{}
+};
+
+struct pci_controller pci0_hose = {
+/*    fixup_irq: gt_fixup_irq, */
+	config_table:gt_config_table,
+};
+
+struct pci_controller pci1_hose = {
+/*    fixup_irq: gt_fixup_irq, */
+	config_table:gt_config_table,
+};
+
+void pci_init_board (void)
+{
+	unsigned int command;
+
+#ifdef DEBUG
+	gt_pci_bus_mode_display (PCI_HOST0);
+#endif
+
+	pci0_hose.first_busno = 0;
+	pci0_hose.last_busno = 0xff;
+	local_buses[0] = pci0_hose.first_busno;
+
+	/* PCI memory space */
+	pci_set_region (pci0_hose.regions + 0,
+			CFG_PCI0_0_MEM_SPACE,
+			CFG_PCI0_0_MEM_SPACE,
+			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (pci0_hose.regions + 1,
+			CFG_PCI0_IO_SPACE_PCI,
+			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+
+	pci_set_ops (&pci0_hose,
+		     pci_hose_read_config_byte_via_dword,
+		     pci_hose_read_config_word_via_dword,
+		     gt_read_config_dword,
+		     pci_hose_write_config_byte_via_dword,
+		     pci_hose_write_config_word_via_dword,
+		     gt_write_config_dword);
+	pci0_hose.region_count = 2;
+
+	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
+
+	pci_register_hose (&pci0_hose);
+	pciArbiterEnable (PCI_HOST0);
+	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MASTER;
+	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MEMORY;
+	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+
+	pci0_hose.last_busno = pci_hose_scan (&pci0_hose);
+
+#ifdef DEBUG
+	gt_pci_bus_mode_display (PCI_HOST1);
+#endif
+	pci1_hose.first_busno = pci0_hose.last_busno + 1;
+	pci1_hose.last_busno = 0xff;
+	pci1_hose.current_busno = pci1_hose.first_busno;
+	local_buses[1] = pci1_hose.first_busno;
+
+	/* PCI memory space */
+	pci_set_region (pci1_hose.regions + 0,
+			CFG_PCI1_0_MEM_SPACE,
+			CFG_PCI1_0_MEM_SPACE,
+			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (pci1_hose.regions + 1,
+			CFG_PCI1_IO_SPACE_PCI,
+			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+	pci_set_ops (&pci1_hose,
+		     pci_hose_read_config_byte_via_dword,
+		     pci_hose_read_config_word_via_dword,
+		     gt_read_config_dword,
+		     pci_hose_write_config_byte_via_dword,
+		     pci_hose_write_config_word_via_dword,
+		     gt_write_config_dword);
+
+	pci1_hose.region_count = 2;
+
+	pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
+
+	pci_register_hose (&pci1_hose);
+
+	pciArbiterEnable (PCI_HOST1);
+	pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
+
+	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MASTER;
+	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+	pci1_hose.last_busno = pci_hose_scan (&pci1_hose);
+
+	command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+	command |= PCI_COMMAND_MEMORY;
+	pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+}
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
new file mode 100644
index 0000000000..8cfe84c217
--- /dev/null
+++ b/board/Marvell/db64460/sdram_init.c
@@ -0,0 +1,1985 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * adaption for the Marvell DB64460 Board
+ * Ingo Assmus (ingo.assmus@keymile.com)
+  ************************************************************************/
+
+
+/* sdram_init.c - automatic memory sizing */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../include/memory.h"
+#include "../include/pci.h"
+#include "../include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "../common/i2c.h"
+#include "64460.h"
+#include "mv_regs.h"
+
+#undef	DEBUG
+#define	MAP_PCI
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+int set_dfcdlInit (void);	/* setup delay line of Mv64460 */
+int mvDmaIsChannelActive (int);
+int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
+int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
+
+/* ------------------------------------------------------------------------- */
+
+int
+memory_map_bank (unsigned int bankNo,
+		 unsigned int bankBase, unsigned int bankLength)
+{
+#ifdef MAP_PCI
+	PCI_HOST host;
+#endif
+
+
+#ifdef DEBUG
+	if (bankLength > 0) {
+		printf ("mapping bank %d at %08x - %08x\n",
+			bankNo, bankBase, bankBase + bankLength - 1);
+	} else {
+		printf ("unmapping bank %d\n", bankNo);
+	}
+#endif
+
+	memoryMapBank (bankNo, bankBase, bankLength);
+
+#ifdef MAP_PCI
+	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
+		const int features =
+			PREFETCH_ENABLE |
+			DELAYED_READ_ENABLE |
+			AGGRESSIVE_PREFETCH |
+			READ_LINE_AGGRESSIVE_PREFETCH |
+			READ_MULTI_AGGRESSIVE_PREFETCH |
+			MAX_BURST_4 | PCI_NO_SWAP;
+
+		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
+
+		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
+				       bankLength);
+
+		pciSetRegionFeatures (host, bankNo, features, bankBase,
+				      bankLength);
+	}
+#endif
+	return 0;
+}
+
+#define GB         (1 << 30)
+
+/* much of this code is based on (or is) the code in the pip405 port */
+/* thanks go to the authors of said port - Josh */
+
+/* structure to store the relevant information about an sdram bank */
+typedef struct sdram_info {
+	uchar drb_size;
+	uchar registered, ecc;
+	uchar tpar;
+	uchar tras_clocks;
+	uchar burst_len;
+	uchar banks, slot;
+} sdram_info_t;
+
+/* Typedefs for 'gtAuxilGetDIMMinfo' function */
+
+typedef enum _memoryType { SDRAM, DDR } MEMORY_TYPE;
+
+typedef enum _voltageInterface { TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
+	SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
+} VOLTAGE_INTERFACE;
+
+typedef enum _max_CL_supported_DDR { DDR_CL_1 = 1, DDR_CL_1_5 = 2, DDR_CL_2 =
+		4, DDR_CL_2_5 = 8, DDR_CL_3 = 16, DDR_CL_3_5 =
+		32, DDR_CL_FAULT } MAX_CL_SUPPORTED_DDR;
+typedef enum _max_CL_supported_SD { SD_CL_1 =
+		1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7,
+		SD_FAULT } MAX_CL_SUPPORTED_SD;
+
+
+/* SDRAM/DDR information struct */
+typedef struct _gtMemoryDimmInfo {
+	MEMORY_TYPE memoryType;
+	unsigned int numOfRowAddresses;
+	unsigned int numOfColAddresses;
+	unsigned int numOfModuleBanks;
+	unsigned int dataWidth;
+	VOLTAGE_INTERFACE voltageInterface;
+	unsigned int errorCheckType;	/* ECC , PARITY.. */
+	unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
+	unsigned int errorCheckDataWidth;	/* 0 - no, 1 - Yes */
+	unsigned int minClkDelay;
+	unsigned int burstLengthSupported;
+	unsigned int numOfBanksOnEachDevice;
+	unsigned int suportedCasLatencies;
+	unsigned int RefreshInterval;
+	unsigned int maxCASlatencySupported_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int maxCASlatencySupported_RoP;	/* RoP right of point (measured in ns) */
+	MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
+	MAX_CL_SUPPORTED_SD maxClSupported_SD;
+	unsigned int moduleBankDensity;
+	/* module attributes (true for yes) */
+	bool bufferedAddrAndControlInputs;
+	bool registeredAddrAndControlInputs;
+	bool onCardPLL;
+	bool bufferedDQMBinputs;
+	bool registeredDQMBinputs;
+	bool differentialClockInput;
+	bool redundantRowAddressing;
+
+	/* module general attributes */
+	bool suportedAutoPreCharge;
+	bool suportedPreChargeAll;
+	bool suportedEarlyRasPreCharge;
+	bool suportedWrite1ReadBurst;
+	bool suported5PercentLowVCC;
+	bool suported5PercentUpperVCC;
+	/* module timing parameters */
+	unsigned int minRasToCasDelay;
+	unsigned int minRowActiveRowActiveDelay;
+	unsigned int minRasPulseWidth;
+	unsigned int minRowPrechargeTime;	/* measured in ns */
+
+	int addrAndCommandHoldTime;	/* LoP left of point (measured in ns) */
+	int addrAndCommandSetupTime;	/* (measured in ns/100) */
+	int dataInputSetupTime;	/* LoP left of point (measured in ns) */
+	int dataInputHoldTime;	/* LoP left of point (measured in ns) */
+/* tAC times for highest 2nd and 3rd highest CAS Latency values */
+	unsigned int clockToDataOut_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int clockToDataOut_RoP;	/* RoP right of point (measured in ns) */
+	unsigned int clockToDataOutMinus1_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int clockToDataOutMinus1_RoP;	/* RoP right of point (measured in ns) */
+	unsigned int clockToDataOutMinus2_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int clockToDataOutMinus2_RoP;	/* RoP right of point (measured in ns) */
+
+	unsigned int minimumCycleTimeAtMaxCasLatancy_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int minimumCycleTimeAtMaxCasLatancy_RoP;	/* RoP right of point (measured in ns) */
+
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP;	/* RoP right of point (measured in ns) */
+
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP;	/* LoP left of point (measured in ns) */
+	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP;	/* RoP right of point (measured in ns) */
+
+	/* Parameters calculated from
+	   the extracted DIMM information */
+	unsigned int size;
+	unsigned int deviceDensity;	/* 16,64,128,256 or 512 Mbit */
+	unsigned int numberOfDevices;
+	uchar drb_size;		/* DRAM size in n*64Mbit */
+	uchar slot;		/* Slot Number this module is inserted in */
+	uchar spd_raw_data[128];	/* Content of SPD-EEPROM copied 1:1 */
+#ifdef DEBUG
+	uchar manufactura[8];	/* Content of SPD-EEPROM Byte 64-71 */
+	uchar modul_id[18];	/* Content of SPD-EEPROM Byte 73-90 */
+	uchar vendor_data[27];	/* Content of SPD-EEPROM Byte 99-125 */
+	unsigned long modul_serial_no;	/* Content of SPD-EEPROM Byte 95-98 */
+	unsigned int manufac_date;	/* Content of SPD-EEPROM Byte 93-94 */
+	unsigned int modul_revision;	/* Content of SPD-EEPROM Byte 91-92 */
+	uchar manufac_place;	/* Content of SPD-EEPROM Byte 72 */
+
+#endif
+} AUX_MEM_DIMM_INFO;
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into 10 ps unit values
+ */
+static inline unsigned short NS10to10PS (unsigned char spd_byte)
+{
+	unsigned short ns, ns10;
+
+	/* isolate upper nibble */
+	ns = (spd_byte >> 4) & 0x0F;
+	/* isolate lower nibble */
+	ns10 = (spd_byte & 0x0F);
+
+	return (ns * 100 + ns10 * 10);
+}
+
+/*
+ * translate ns coding of SPD timing values
+ * into 10 ps unit values
+ */
+static inline unsigned short NSto10PS (unsigned char spd_byte)
+{
+	return (spd_byte * 100);
+}
+
+/* This code reads the SPD chip on the sdram and populates
+ * the array which is passed in with the relevant information */
+/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
+static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned long spd_checksum;
+
+#ifdef ZUMA_NTL
+	/* zero all the values */
+	memset (info, 0, sizeof (*info));
+
+/*
+	if (!slot) {
+	    info->slot = 0;
+	    info->banks = 1;
+	    info->registered = 0;
+		    info->drb_size = 16;*/ /* 16 - 256MBit, 32 - 512MBit */
+/*	    info->tpar = 3;
+	    info->tras_clocks = 5;
+	    info->burst_len = 4;
+*/
+#ifdef CONFIG_MV64460_ECC
+	/* check for ECC/parity [0 = none, 1 = parity, 2 = ecc] */
+	dimmInfo->errorCheckType = 2;
+/*	    info->ecc = 2;*/
+#endif
+}
+
+return 0;
+
+#else
+	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
+	int ret;
+	unsigned int i, j, density = 1, devicesForErrCheck = 0;
+
+#ifdef DEBUG
+	unsigned int k;
+#endif
+	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
+	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
+	uchar supp_cal, cal_val;
+	ulong memclk, tmemclk;
+	ulong tmp;
+	uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
+	uchar data[128];
+
+	memclk = gd->bus_clk;
+	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
+
+	DP (puts ("before i2c read\n"));
+
+	ret = i2c_read (addr, 0, 1, data, 128);
+
+	DP (puts ("after i2c read\n"));
+
+	/* zero all the values */
+	memset (dimmInfo, 0, sizeof (*dimmInfo));
+
+	/* copy the SPD content 1:1 into the dimmInfo structure */
+	for (i = 0; i <= 127; i++) {
+		dimmInfo->spd_raw_data[i] = data[i];
+	}
+
+	if (ret) {
+		DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
+		return 0;
+	} else
+		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
+
+#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+
+	for (i = 0; i <= 127; i++) {
+		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
+			data[i]);
+	}
+
+#endif
+#ifdef DEBUG
+/* find Manufactura of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
+		dimmInfo->manufactura[i] = data[64 + i];
+	}
+	printf ("\nThis RAM-Module is produced by: 		%s\n",
+		dimmInfo->manufactura);
+
+/* find Manul-ID of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
+		dimmInfo->modul_id[i] = data[73 + i];
+	}
+	printf ("The Module-ID of this RAM-Module is: 		%s\n",
+		dimmInfo->modul_id);
+
+/* find Vendor-Data of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
+		dimmInfo->vendor_data[i] = data[99 + i];
+	}
+	printf ("Vendor Data of this RAM-Module is: 		%s\n",
+		dimmInfo->vendor_data);
+
+/* find modul_serial_no of Dimm Module */
+	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
+	printf ("Serial No. of this RAM-Module is: 		%ld (%lx)\n",
+		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
+
+/* find Manufac-Data of Dimm Module */
+	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
+	printf ("Manufactoring Date of this RAM-Module is: 	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
+
+/* find modul_revision of Dimm Module */
+	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
+	printf ("Module Revision of this RAM-Module is: 		%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
+
+/* find manufac_place of Dimm Module */
+	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
+	printf ("manufac_place of this RAM-Module is: 		%d\n",
+		dimmInfo->manufac_place);
+
+#endif
+
+/*------------------------------------------------------------------------------------------------------------------------------*/
+/* calculate SPD checksum */
+/*------------------------------------------------------------------------------------------------------------------------------*/
+	spd_checksum = 0;
+
+	for (i = 0; i <= 62; i++) {
+		spd_checksum += data[i];
+	}
+
+	if ((spd_checksum & 0xff) != data[63]) {
+		printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]);
+		hang ();
+	}
+
+	else
+		printf ("SPD Checksum ok!\n");
+
+
+/*------------------------------------------------------------------------------------------------------------------------------*/
+	for (i = 2; i <= 35; i++) {
+		switch (i) {
+		case 2:	/* Memory type (DDR / SDRAM) */
+			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
+#ifdef DEBUG
+			if (dimmInfo->memoryType == 0)
+				DP (printf
+				    ("Dram_type in slot %d is: 			SDRAM\n",
+				     dimmInfo->slot));
+			if (dimmInfo->memoryType == 1)
+				DP (printf
+				    ("Dram_type in slot %d is: 			DDRAM\n",
+				     dimmInfo->slot));
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 3:	/* Number Of Row Addresses */
+			dimmInfo->numOfRowAddresses = data[i];
+			DP (printf
+			    ("Module Number of row addresses: 		%d\n",
+			     dimmInfo->numOfRowAddresses));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 4:	/* Number Of Column Addresses */
+			dimmInfo->numOfColAddresses = data[i];
+			DP (printf
+			    ("Module Number of col addresses: 		%d\n",
+			     dimmInfo->numOfColAddresses));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 5:	/* Number Of Module Banks */
+			dimmInfo->numOfModuleBanks = data[i];
+			DP (printf
+			    ("Number of Banks on Mod. : 				%d\n",
+			     dimmInfo->numOfModuleBanks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 6:	/* Data Width */
+			dimmInfo->dataWidth = data[i];
+			DP (printf
+			    ("Module Data Width: 				%d\n",
+			     dimmInfo->dataWidth));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 8:	/* Voltage Interface */
+			switch (data[i]) {
+			case 0x0:
+				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
+				DP (printf
+				    ("Module is 					TTL_5V_TOLERANT\n"));
+				break;
+			case 0x1:
+				dimmInfo->voltageInterface = LVTTL;
+				DP (printf
+				    ("Module is 					LVTTL\n"));
+				break;
+			case 0x2:
+				dimmInfo->voltageInterface = HSTL_1_5V;
+				DP (printf
+				    ("Module is 					TTL_5V_TOLERANT\n"));
+				break;
+			case 0x3:
+				dimmInfo->voltageInterface = SSTL_3_3V;
+				DP (printf
+				    ("Module is 					HSTL_1_5V\n"));
+				break;
+			case 0x4:
+				dimmInfo->voltageInterface = SSTL_2_5V;
+				DP (printf
+				    ("Module is 					SSTL_2_5V\n"));
+				break;
+			default:
+				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
+				DP (printf
+				    ("Module is 					VOLTAGE_UNKNOWN\n"));
+				break;
+			}
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 9:	/* Minimum Cycle Time At Max CasLatancy */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
+				rightOfPoint;
+			DP (printf
+			    ("Minimum Cycle Time At Max CasLatancy: 		%d.%d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 10:	/* Clock To Data Out */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOut_LoP = leftOfPoint;
+			dimmInfo->clockToDataOut_RoP = rightOfPoint;
+			DP (printf ("Clock To Data Out: 				%d.%2d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->clockToDataOut */
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+/*#ifdef CONFIG_ECC */
+		case 11:	/* Error Check Type */
+			dimmInfo->errorCheckType = data[i];
+			DP (printf
+			    ("Error Check Type (0=NONE): 			%d\n",
+			     dimmInfo->errorCheckType));
+			break;
+/* #endif */
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 12:	/* Refresh Interval */
+			dimmInfo->RefreshInterval = data[i];
+			DP (printf
+			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
+			     dimmInfo->RefreshInterval));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 13:	/* Sdram Width */
+			dimmInfo->sdramWidth = data[i];
+			DP (printf
+			    ("Sdram Width: 					%d\n",
+			     dimmInfo->sdramWidth));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 14:	/* Error Check Data Width */
+			dimmInfo->errorCheckDataWidth = data[i];
+			DP (printf
+			    ("Error Check Data Width: 			%d\n",
+			     dimmInfo->errorCheckDataWidth));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 15:	/* Minimum Clock Delay */
+			dimmInfo->minClkDelay = data[i];
+			DP (printf
+			    ("Minimum Clock Delay: 				%d\n",
+			     dimmInfo->minClkDelay));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 16:	/* Burst Length Supported */
+			   /******-******-******-*******
+			   * bit3 | bit2 | bit1 | bit0 *
+			   *******-******-******-*******
+	    burst length = *  8   |  4   |   2  |   1  *
+			   *****************************
+
+	    If for example bit0 and bit2 are set, the burst
+	    length supported are 1 and 4. */
+
+			dimmInfo->burstLengthSupported = data[i];
+#ifdef DEBUG
+			DP (printf
+			    ("Burst Length Supported: 			"));
+			if (dimmInfo->burstLengthSupported & 0x01)
+				DP (printf ("1, "));
+			if (dimmInfo->burstLengthSupported & 0x02)
+				DP (printf ("2, "));
+			if (dimmInfo->burstLengthSupported & 0x04)
+				DP (printf ("4, "));
+			if (dimmInfo->burstLengthSupported & 0x08)
+				DP (printf ("8, "));
+			DP (printf (" Bit \n"));
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 17:	/* Number Of Banks On Each Device */
+			dimmInfo->numOfBanksOnEachDevice = data[i];
+			DP (printf
+			    ("Number Of Banks On Each Chip: 			%d\n",
+			     dimmInfo->numOfBanksOnEachDevice));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 18:	/* Suported Cas Latencies */
+
+			/*     DDR:
+			 *******-******-******-******-******-******-******-*******
+			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+			 *******-******-******-******-******-******-******-*******
+			 CAS =   * TBD  | TBD  | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  *
+			 *********************************************************
+			 SDRAM:
+			 *******-******-******-******-******-******-******-*******
+			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+			 *******-******-******-******-******-******-******-*******
+			 CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  *
+			 ********************************************************/
+			dimmInfo->suportedCasLatencies = data[i];
+#ifdef DEBUG
+			DP (printf
+			    ("Suported Cas Latencies: (CL) 			"));
+			if (dimmInfo->memoryType == 0) {	/* SDRAM */
+				for (k = 0; k <= 7; k++) {
+					if (dimmInfo->
+					    suportedCasLatencies & (1 << k))
+						DP (printf
+						    ("%d, 			",
+						     k + 1));
+				}
+
+			} else {	/* DDR-RAM */
+
+				if (dimmInfo->suportedCasLatencies & 1)
+					DP (printf ("1, "));
+				if (dimmInfo->suportedCasLatencies & 2)
+					DP (printf ("1.5, "));
+				if (dimmInfo->suportedCasLatencies & 4)
+					DP (printf ("2, "));
+				if (dimmInfo->suportedCasLatencies & 8)
+					DP (printf ("2.5, "));
+				if (dimmInfo->suportedCasLatencies & 16)
+					DP (printf ("3, "));
+				if (dimmInfo->suportedCasLatencies & 32)
+					DP (printf ("3.5, "));
+
+			}
+			DP (printf ("\n"));
+#endif
+			/* Calculating MAX CAS latency */
+			for (j = 7; j > 0; j--) {
+				if (((dimmInfo->
+				      suportedCasLatencies >> j) & 0x1) ==
+				    1) {
+					switch (dimmInfo->memoryType) {
+					case DDR:
+						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
+						switch (j) {
+						case 7:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								DDR_CL_FAULT;
+							hang ();
+							break;
+						case 6:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								DDR_CL_FAULT;
+							hang ();
+							break;
+						case 5:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			3.5 clk's\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_3_5;
+							break;
+						case 4:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			3 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_3;
+							break;
+						case 3:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			2.5 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_2_5;
+							break;
+						case 2:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			2 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_2;
+							break;
+						case 1:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			1.5 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_1_5;
+							break;
+						}
+
+						/* ronen - in case we have a DIMM with minimumCycleTimeAtMaxCasLatancy
+						   lower then our SDRAM cycle count, we won't be able to support this CAL
+						   and we will have to use lower CAL. (minus - means from 3.0 to 2.5) */
+						if ((dimmInfo->
+						     minimumCycleTimeAtMaxCasLatancy_LoP
+						     <
+						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						    ||
+						    ((dimmInfo->
+						      minimumCycleTimeAtMaxCasLatancy_LoP
+						      ==
+						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     && (dimmInfo->
+							 minimumCycleTimeAtMaxCasLatancy_RoP
+							 <
+							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+						{
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								dimmInfo->
+								maxClSupported_DDR
+								>> 1;
+							DP (printf
+							    ("*** Change actual Cas Latencies cause of minimumCycleTime n"));
+						}
+						/* ronen - checkif the Dimm frequency compared to the Sysclock. */
+						if ((dimmInfo->
+						     minimumCycleTimeAtMaxCasLatancy_LoP
+						     >
+						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						    ||
+						    ((dimmInfo->
+						      minimumCycleTimeAtMaxCasLatancy_LoP
+						      ==
+						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     && (dimmInfo->
+							 minimumCycleTimeAtMaxCasLatancy_RoP
+							 >
+							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+						{
+							printf ("*********************************************************\n");
+							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
+							printf ("*********************************************************\n");
+							hang ();
+						}
+
+						dimmInfo->
+							maxCASlatencySupported_LoP
+							=
+							1 +
+							(int) (5 * j / 10);
+						if (((5 * j) % 10) != 0)
+							dimmInfo->
+								maxCASlatencySupported_RoP
+								= 5;
+						else
+							dimmInfo->
+								maxCASlatencySupported_RoP
+								= 0;
+						DP (printf
+						    ("Max. Cas Latencies (DDR LoP.RoP Notation): 	%d.%d \n",
+						     dimmInfo->
+						     maxCASlatencySupported_LoP,
+						     dimmInfo->
+						     maxCASlatencySupported_RoP));
+						break;
+					case SDRAM:
+						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
+						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded                   */
+						DP (printf
+						    ("Max. Cas Latencies (SD): %d\n",
+						     dimmInfo->
+						     maxClSupported_SD));
+						dimmInfo->
+							maxCASlatencySupported_LoP
+							= j;
+						dimmInfo->
+							maxCASlatencySupported_RoP
+							= 0;
+						DP (printf
+						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+						     dimmInfo->
+						     maxCASlatencySupported_LoP,
+						     dimmInfo->
+						     maxCASlatencySupported_RoP));
+						break;
+					}
+					break;
+				}
+			}
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 21:	/* Buffered Address And Control Inputs */
+			DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
+			dimmInfo->bufferedAddrAndControlInputs =
+				data[i] & BIT0;
+			dimmInfo->registeredAddrAndControlInputs =
+				(data[i] & BIT1) >> 1;
+			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
+			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
+			dimmInfo->registeredDQMBinputs =
+				(data[i] & BIT4) >> 4;
+			dimmInfo->differentialClockInput =
+				(data[i] & BIT5) >> 5;
+			dimmInfo->redundantRowAddressing =
+				(data[i] & BIT6) >> 6;
+#ifdef DEBUG
+			if (dimmInfo->bufferedAddrAndControlInputs == 1)
+				DP (printf
+				    (" - Buffered Address/Control Input:		Yes \n"));
+			else
+				DP (printf
+				    (" - Buffered Address/Control Input:		No \n"));
+
+			if (dimmInfo->registeredAddrAndControlInputs == 1)
+				DP (printf
+				    (" - Registered Address/Control Input:		Yes \n"));
+			else
+				DP (printf
+				    (" - Registered Address/Control Input:		No \n"));
+
+			if (dimmInfo->onCardPLL == 1)
+				DP (printf
+				    (" - On-Card PLL (clock):				Yes \n"));
+			else
+				DP (printf
+				    (" - On-Card PLL (clock):				No \n"));
+
+			if (dimmInfo->bufferedDQMBinputs == 1)
+				DP (printf
+				    (" - Bufferd DQMB Inputs:				Yes \n"));
+			else
+				DP (printf
+				    (" - Bufferd DQMB Inputs:				No \n"));
+
+			if (dimmInfo->registeredDQMBinputs == 1)
+				DP (printf
+				    (" - Registered DQMB Inputs:			Yes \n"));
+			else
+				DP (printf
+				    (" - Registered DQMB Inputs:			No \n"));
+
+			if (dimmInfo->differentialClockInput == 1)
+				DP (printf
+				    (" - Differential Clock Input:			Yes \n"));
+			else
+				DP (printf
+				    (" - Differential Clock Input:			No \n"));
+
+			if (dimmInfo->redundantRowAddressing == 1)
+				DP (printf
+				    (" - redundant Row Addressing:			Yes \n"));
+			else
+				DP (printf
+				    (" - redundant Row Addressing:			No \n"));
+
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 22:	/* Suported AutoPreCharge */
+			DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
+			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
+			dimmInfo->suportedAutoPreCharge =
+				(data[i] & BIT1) >> 1;
+			dimmInfo->suportedPreChargeAll =
+				(data[i] & BIT2) >> 2;
+			dimmInfo->suportedWrite1ReadBurst =
+				(data[i] & BIT3) >> 3;
+			dimmInfo->suported5PercentLowVCC =
+				(data[i] & BIT4) >> 4;
+			dimmInfo->suported5PercentUpperVCC =
+				(data[i] & BIT5) >> 5;
+#ifdef DEBUG
+			if (dimmInfo->suportedEarlyRasPreCharge == 1)
+				DP (printf
+				    (" - Early Ras Precharge:			Yes \n"));
+			else
+				DP (printf
+				    (" -  Early Ras Precharge:			No \n"));
+
+			if (dimmInfo->suportedAutoPreCharge == 1)
+				DP (printf
+				    (" - AutoPreCharge:				Yes \n"));
+			else
+				DP (printf
+				    (" -  AutoPreCharge:				No \n"));
+
+			if (dimmInfo->suportedPreChargeAll == 1)
+				DP (printf
+				    (" - Precharge All:				Yes \n"));
+			else
+				DP (printf
+				    (" -  Precharge All:				No \n"));
+
+			if (dimmInfo->suportedWrite1ReadBurst == 1)
+				DP (printf
+				    (" - Write 1/ReadBurst:				Yes \n"));
+			else
+				DP (printf
+				    (" -  Write 1/ReadBurst:				No \n"));
+
+			if (dimmInfo->suported5PercentLowVCC == 1)
+				DP (printf
+				    (" - lower VCC tolerance:			5 Percent \n"));
+			else
+				DP (printf
+				    ("  - lower VCC tolerance:			10 Percent \n"));
+
+			if (dimmInfo->suported5PercentUpperVCC == 1)
+				DP (printf
+				    (" - upper VCC tolerance:			5 Percent \n"));
+			else
+				DP (printf
+				    (" -  upper VCC tolerance:			10 Percent \n"));
+
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
+				rightOfPoint;
+			DP (printf ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
+			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out (2nd CL value): 		%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
+				rightOfPoint;
+			DP (printf ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint));	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
+			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out (3rd CL value): 		%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 27:	/* Minimum Row Precharge Time */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
+			trp_clocks =
+				(dimmInfo->minRowPrechargeTime +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
+			     tmemclk, tmemclk / 100, tmemclk % 100));
+			DP (printf
+			    ("Minimum Row Precharge Time [ns]: 		%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 28:	/* Minimum Row Active to Row Active Time */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
+			trrd_clocks =
+				(dimmInfo->minRowActiveRowActiveDelay +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Row Active -To- Row Active Delay [ns]: 	%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 29:	/* Minimum Ras-To-Cas Delay */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
+			trcd_clocks =
+				(dimmInfo->minRowActiveRowActiveDelay +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Ras-To-Cas Delay [ns]: 			%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 30:	/* Minimum Ras Pulse Width */
+			dimmInfo->minRasPulseWidth = data[i];
+			tras_clocks =
+				(NSto10PS (data[i]) +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Ras Pulse Width [ns]: 			%d = in Clk cycles %d\n",
+			     dimmInfo->minRasPulseWidth, tras_clocks));
+
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 31:	/* Module Bank Density */
+			dimmInfo->moduleBankDensity = data[i];
+			DP (printf
+			    ("Module Bank Density: 				%d\n",
+			     dimmInfo->moduleBankDensity));
+#ifdef DEBUG
+			DP (printf
+			    ("*** Offered Densities (more than 1 = Multisize-Module): "));
+			{
+				if (dimmInfo->moduleBankDensity & 1)
+					DP (printf ("4MB, "));
+				if (dimmInfo->moduleBankDensity & 2)
+					DP (printf ("8MB, "));
+				if (dimmInfo->moduleBankDensity & 4)
+					DP (printf ("16MB, "));
+				if (dimmInfo->moduleBankDensity & 8)
+					DP (printf ("32MB, "));
+				if (dimmInfo->moduleBankDensity & 16)
+					DP (printf ("64MB, "));
+				if (dimmInfo->moduleBankDensity & 32)
+					DP (printf ("128MB, "));
+				if ((dimmInfo->moduleBankDensity & 64)
+				    || (dimmInfo->moduleBankDensity & 128)) {
+					DP (printf ("ERROR, "));
+					hang ();
+				}
+			}
+			DP (printf ("\n"));
+#endif
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->addrAndCommandSetupTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Address And Command Setup Time [ns]: 		%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 33:	/* Address And Command Hold Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->addrAndCommandHoldTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Address And Command Hold Time [ns]: 		%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 34:	/* Data Input Setup Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->dataInputSetupTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Data Input Setup Time [ns]: 			%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+		case 35:	/* Data Input Hold Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->dataInputHoldTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Data Input Hold Time [ns]: 			%d.%d\n\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+		}
+	}
+	/* calculating the sdram density */
+	for (i = 0;
+	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
+	     i++) {
+		density = density * 2;
+	}
+	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
+		dimmInfo->sdramWidth;
+	dimmInfo->numberOfDevices =
+		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
+		dimmInfo->numOfModuleBanks;
+	devicesForErrCheck =
+		(dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth;
+	if ((dimmInfo->errorCheckType == 0x1)
+	    || (dimmInfo->errorCheckType == 0x2)
+	    || (dimmInfo->errorCheckType == 0x3)) {
+		dimmInfo->size =
+			(dimmInfo->deviceDensity / 8) *
+			(dimmInfo->numberOfDevices -
+			 /* ronen on the 1G dimm we get wrong value. (was devicesForErrCheck) */
+			 dimmInfo->numberOfDevices / 8);
+	} else {
+		dimmInfo->size =
+			(dimmInfo->deviceDensity / 8) *
+			dimmInfo->numberOfDevices;
+	}
+
+	/* compute the module DRB size */
+	tmp = (1 <<
+	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
+	tmp *= dimmInfo->numOfModuleBanks;
+	tmp *= dimmInfo->sdramWidth;
+	tmp = tmp >> 24;	/* div by 0x4000000 (64M)       */
+	dimmInfo->drb_size = (uchar) tmp;
+	DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
+
+	/* try a CAS latency of 3 first... */
+
+	/* bit 1 is CL2, bit 2 is CL3 */
+	supp_cal = (dimmInfo->suportedCasLatencies & 0x6) >> 1;
+
+	cal_val = 0;
+	if (supp_cal & 3) {
+		if (NS10to10PS (data[9]) <= tmemclk)
+			cal_val = 3;
+	}
+
+	/* then 2... */
+	if (supp_cal & 2) {
+		if (NS10to10PS (data[23]) <= tmemclk)
+			cal_val = 2;
+	}
+
+	DP (printf ("cal_val = %d\n", cal_val));
+
+	/* bummer, did't work... */
+	if (cal_val == 0) {
+		DP (printf ("Couldn't find a good CAS latency\n"));
+		hang ();
+		return 0;
+	}
+
+	return true;
+#endif
+}
+
+/* sets up the GT properly with information passed in */
+int setup_sdram (AUX_MEM_DIMM_INFO * info)
+{
+	ulong tmp, check;
+	ulong tmp_sdram_mode = 0;	/* 0x141c */
+	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
+	int i;
+
+	/* added 8/21/2003 P. Marchese */
+	unsigned int sdram_config_reg;
+
+	/* added 10/10/2003 P. Marchese */
+	ulong sdram_chip_size;
+
+	/* sanity checking */
+	if (!info->numOfModuleBanks) {
+		printf ("setup_sdram called with 0 banks\n");
+		return 1;
+	}
+
+	/* delay line */
+	set_dfcdlInit ();	/* may be its not needed */
+	DP (printf ("Delay line set done\n"));
+
+	/* set SDRAM mode NOP */ /* To_do check it */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
+	}
+
+	/* SDRAM configuration */
+/* added 8/21/2003 P. Marchese */
+/* code allows usage of registered DIMMS */
+
+	/* figure out the memory refresh internal */
+	switch (info->RefreshInterval) {
+	case 0x0:
+	case 0x80:		/* refresh period is 15.625 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+					/ (float) 1000000.0);
+		break;
+	case 0x1:
+	case 0x81:		/* refresh period is 3.9 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x2:
+	case 0x82:		/* refresh period is 7.8 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x3:
+	case 0x83:		/* refresh period is 31.3 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x4:
+	case 0x84:		/* refresh period is 62.5 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	case 0x5:
+	case 0x85:		/* refresh period is 125 usec */
+		sdram_config_reg =
+			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+					(float) 1000000.0);
+		break;
+	default:		/* refresh period undefined */
+		printf ("DRAM refresh period is unknown!\n");
+		printf ("Aborting DRAM setup with an error\n");
+		hang ();
+		break;
+	}
+	DP (printf ("calculated refresh interval %0x\n", sdram_config_reg));
+
+	/* make sure the refresh value is only 14 bits */
+	if (sdram_config_reg > 0x1fff)
+		sdram_config_reg = 0x1fff;
+	DP (printf ("adjusted refresh interval %0x\n", sdram_config_reg));
+
+	/* we want physical bank interleaving and */
+	/* virtual bank interleaving enabled so do nothing */
+	/* since these bits need to be zero to enable the interleaving */
+
+	/*  registered DRAM ? */
+	if (info->registeredAddrAndControlInputs == 1) {
+		/* it's registered DRAM, so set the reg. DRAM bit */
+		sdram_config_reg = sdram_config_reg | BIT17;
+		DP (printf ("Enabling registered DRAM bit\n"));
+	}
+	/* turn on DRAM ECC? */
+#ifdef CONFIG_MV64460_ECC
+	if (info->errorCheckType == 0x2) {
+		/* DRAM has ECC, so turn it on */
+		sdram_config_reg = sdram_config_reg | BIT18;
+		DP (printf ("Enabling ECC\n"));
+	}
+#endif
+	/* set the data DQS pin configuration */
+	switch (info->sdramWidth) {
+	case 0x4:		/* memory is x4 */
+		sdram_config_reg = sdram_config_reg | BIT20 | BIT21;
+		DP (printf ("Data DQS pins set for 16 pins\n"));
+		break;
+	case 0x8:		/* memory is x8 or x16 */
+	case 0x10:
+		sdram_config_reg = sdram_config_reg | BIT21;
+		DP (printf ("Data DQS pins set for 8 pins\n"));
+		break;
+	case 0x20:		/* memory is x32 */
+		/* both bits are cleared for x32 so nothing to do */
+		DP (printf ("Data DQS pins set for 2 pins\n"));
+		break;
+	default:		/* memory width unsupported */
+		printf ("DRAM chip width is unknown!\n");
+		printf ("Aborting DRAM setup with an error\n");
+		hang ();
+		break;
+	}
+
+	/*ronen db64460 */
+	/* perform read buffer assignments */
+	/* we are going to use the Power-up defaults */
+	/* bit 27 = PCI bus #0 = buffer 0 */
+	/* bit 28 = PCI bus #1 = buffer 0 */
+	/* bit 29 = MPSC = buffer 0 */
+	/* bit 30 = IDMA = buffer 0 */
+	/* bit 31 = Gigabit = buffer 0 */
+	sdram_config_reg = sdram_config_reg | 0x58000000;
+	sdram_config_reg = sdram_config_reg & 0xffffff00;
+	/* bit 14 FBSplit = FCRAM controller bsplit enable. */
+	/* bit 15 vw = FCRAM Variable write length enable.   */
+	/* bit 16 DType = Dram Type (0 = FCRAM,1 = Standard) */
+	sdram_config_reg = sdram_config_reg | BIT14 | BIT15;
+
+	/* write the value into the SDRAM configuration register */
+	GT_REG_WRITE (SDRAM_CONFIG, sdram_config_reg);
+	DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG)));
+
+	/* SDRAM open pages control keep open as much as I can */
+	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
+	DP (printf
+	    ("sdram_open_pages_controll 0x1414: %08x\n",
+	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
+
+	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
+	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
+	if (tmp == 0)
+		DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
+	else
+		DP (printf
+		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
+
+	/* SDRAM set CAS Latency according to SPD information */
+	switch (info->memoryType) {
+	case SDRAM:
+		printf ("### SD-RAM not supported !!!\n");
+		printf ("Aborting!!!\n");
+		hang ();
+		/* ToDo fill SD-RAM if needed !!!!! */
+		break;
+		/* Calculate the settings for SDRAM mode and Dunit control low registers */
+		/* Values set according to technical bulletin TB-92 rev. c */
+	case DDR:
+		DP (printf ("### SET-CL for DDR-RAM\n"));
+		/* ronen db64460 - change the tmp_dunit_control_low setting!!! */
+		switch (info->maxClSupported_DDR) {
+		case DDR_CL_3:
+			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
+			if (tmp == 1) {	/* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x05110051;
+				else
+					tmp_dunit_control_low = 0x24110051;
+				DP (printf
+				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
+			} else {	/* clk sync. bypassed   */
+
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0xC5000540;
+				else
+					tmp_dunit_control_low = 0xC4000540;
+				DP (printf
+				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+		case DDR_CL_2_5:
+			tmp_sdram_mode = 0x62;	/* CL=2.5 Burstlength = 4 */
+			if (tmp == 1) {	/* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x25110051;
+				else
+					tmp_dunit_control_low = 0x24110051;
+				DP (printf
+				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
+			} else {	/* clk sync. bypassed   */
+
+				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0xC5000540;
+					/* printf("CL = 2.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");1 */
+					/* printf("Aborting!!!\n");1 */
+					/* hang();1 */
+				} else
+					tmp_dunit_control_low = 0xC4000540;
+				DP (printf
+				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+		case DDR_CL_2:
+			tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
+			if (tmp == 1) {	/* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x04110051;
+				else
+					tmp_dunit_control_low = 0x03110051;
+				DP (printf
+				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
+			} else {	/* clk sync. bypassed   */
+
+				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
+					/*printf("CL = 2, Clock Unsync'ed, Dunit Control Low register setting undefined\n");1 */
+					/*printf("Aborting!!!\n");1 */
+					/*hang();1 */
+					tmp_dunit_control_low = 0xC4000540;
+				} else
+					tmp_dunit_control_low = 0xC3000540;;
+				DP (printf
+				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+		case DDR_CL_1_5:
+			tmp_sdram_mode = 0x52;	/* CL=1.5 Burstlength = 4 */
+			if (tmp == 1) {	/* clocks sync */
+				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
+					tmp_dunit_control_low = 0x24110051;
+				else
+					tmp_dunit_control_low = 0x23110051;
+				DP (printf
+				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+				printf ("Warnning: DRAM ClkSync was never tested(db64460)!!!!!\n");
+			} else {	/* clk sync. bypassed   */
+
+				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
+					/*printf("CL = 1.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");1 */
+					/*printf("Aborting!!!\n");1 */
+					/*hang();1 */
+					tmp_dunit_control_low = 0xC4000540;
+				} else
+					tmp_dunit_control_low = 0xC3000540;
+				DP (printf
+				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+
+		default:
+			printf ("Max. CL is out of range %d\n",
+				info->maxClSupported_DDR);
+			hang ();
+			break;
+		}		/* end DDR switch */
+		break;
+	}			/* end CL switch */
+
+	/* Write results of CL detection procedure */
+	/* set SDRAM mode reg. 0x141c */
+	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
+
+	/* set SDRAM mode SetCommand 0x1418 */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 0x1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+	}
+
+	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
+	GT_REG_WRITE (D_UNIT_CONTROL_LOW, tmp_dunit_control_low);
+
+	/* set SDRAM mode SetCommand 0x1418 */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
+	}
+
+/*------------------------------------------------------------------------------ */
+
+	/* bank parameters */
+	/* SDRAM address decode register 0x1410 */
+	/* program this with the default value */
+	tmp = 0x02;		/* power-up default address select decoding value */
+
+	DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
+/* figure out the DRAM chip size */
+	sdram_chip_size =
+		(1 << (info->numOfRowAddresses + info->numOfColAddresses));
+	sdram_chip_size *= info->sdramWidth;
+	sdram_chip_size *= 4;
+	DP (printf ("computed sdram chip size is %#lx\n", sdram_chip_size));
+	/* divide sdram chip size by 64 Mbits */
+	sdram_chip_size = sdram_chip_size / 0x4000000;
+	switch (sdram_chip_size) {
+	case 1:		/* 64 Mbit */
+	case 2:		/* 128 Mbit */
+		DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
+		tmp |= (0x00 << 4);
+		break;
+	case 4:		/* 256 Mbit */
+	case 8:		/* 512 Mbit */
+		DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
+		tmp |= (0x01 << 4);
+		break;
+	case 16:		/* 1 Gbit */
+	case 32:		/* 2 Gbit */
+		DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
+		tmp |= (0x02 << 4);
+		break;
+	default:
+		printf ("Error in dram size calculation\n");
+		printf ("RAM-Device_size is unsupported\n");
+		hang ();
+	}
+
+	/* SDRAM address control */
+	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
+	DP (printf
+	    ("setting up sdram address control (0x1410) with: %08lx \n",
+	     tmp));
+
+/* ------------------------------------------------------------------------------ */
+/* same settings for registerd & non-registerd DDR SDRAM */
+	DP (printf
+	    ("setting up sdram_timing_control_low (0x1408) with: %08x \n",
+	     0x01501220));
+	/*ronen db64460 */
+	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x01501220);
+
+
+/* ------------------------------------------------------------------------------ */
+
+	/* SDRAM configuration */
+	tmp = GTREGREAD (SDRAM_CONFIG);
+
+	if (info->registeredAddrAndControlInputs
+	    || info->registeredDQMBinputs) {
+		tmp |= (1 << 17);
+		DP (printf
+		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
+		     info->registeredAddrAndControlInputs,
+		     info->registeredDQMBinputs));
+	}
+
+	/* Use buffer 1 to return read data to the CPU
+	 * Page 426 MV6indent: Standard input:1464: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
+
+indent: Standard input:1465: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
+
+4460 */
+	tmp |= (1 << 26);
+	DP (printf
+	    ("Before Buffer assignment - sdram_conf (0x1400): %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
+	DP (printf
+	    ("After Buffer assignment - sdram_conf (0x1400): %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
+
+	/* SDRAM timing To_do: */
+/* ------------------------------------------------------------------------------ */
+	/* ronen db64460 */
+	DP (printf
+	    ("setting up sdram_timing_control_high (0x140c) with: %08x \n",
+	     0xc));
+	GT_REG_WRITE (SDRAM_TIMING_CONTROL_HIGH, 0xc);
+
+	DP (printf
+	    ("setting up sdram address pads control (0x14c0) with: %08x \n",
+	     0x7d5014a));
+	GT_REG_WRITE (SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x7d5014a);
+
+	DP (printf
+	    ("setting up sdram data pads control (0x14c4) with: %08x \n",
+	     0x7d5014a));
+	GT_REG_WRITE (SDRAM_DATA_PADS_CALIBRATION, 0x7d5014a);
+
+/* ------------------------------------------------------------------------------ */
+
+	/* set the SDRAM configuration for each bank */
+
+/*      for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
+	{
+		i = info->slot;
+		DP (printf
+		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
+
+		/* map the bank */
+		memory_map_bank (i, 0, GB / 4);
+
+		/* set SDRAM mode */ /* To_do check it */
+		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+		check = GTREGREAD (SDRAM_OPERATION);
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
+		     check));
+
+
+		/* switch back to normal operation mode */
+		GT_REG_WRITE (SDRAM_OPERATION, 0);
+		check = GTREGREAD (SDRAM_OPERATION);
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
+		     check));
+
+		/* unmap the bank */
+		memory_map_bank (i, 0, 0);
+	}
+
+	return 0;
+
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+long int dram_size (long int *base, long int maxsize)
+{
+	volatile long int *addr, *b = base;
+	long int cnt, val, save1, save2;
+
+#define STARTVAL (1<<20)	/* start test at 1M */
+	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
+	     cnt <<= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		save1 = *addr;	/* save contents of addr */
+		save2 = *b;	/* save contents of base */
+
+		*addr = cnt;	/* write cnt to addr */
+		*b = 0;		/* put null at base */
+
+		/* check at base address */
+		if ((*b) != 0) {
+			*addr = save1;	/* restore *addr */
+			*b = save2;	/* restore *b */
+			return (0);
+		}
+		val = *addr;	/* read *addr */
+		val = *addr;	/* read *addr */
+
+		*addr = save1;
+		*b = save2;
+
+		if (val != cnt) {
+			DP (printf
+			    ("Found %08x  at Address %08x (failure)\n",
+			     (unsigned int) val, (unsigned int) addr));
+			/* fix boundary condition.. STARTVAL means zero */
+			if (cnt == STARTVAL / sizeof (long))
+				cnt = 0;
+			return (cnt * sizeof (long));
+		}
+	}
+	return maxsize;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* ppcboot interface function to SDRAM init - this is where all the
+ * controlling logic happens */
+long int initdram (int board_type)
+{
+	int s0 = 0, s1 = 0;
+	int checkbank[4] = {[0 ... 3] = 0 };
+	ulong realsize, total, check;
+	AUX_MEM_DIMM_INFO dimmInfo1;
+	AUX_MEM_DIMM_INFO dimmInfo2;
+	int nhr, bank_no;
+	ulong dest, memSpaceAttr;
+
+	/* first, use the SPD to get info about the SDRAM/ DDRRAM */
+
+	/* check the NHR bit and skip mem init if it's already done */
+	nhr = get_hid0 () & (1 << 16);
+
+	if (nhr) {
+		printf ("Skipping SD- DDRRAM setup due to NHR bit being set\n");
+	} else {
+		/* DIMM0 */
+		s0 = check_dimm (0, &dimmInfo1);
+
+		/* DIMM1 */
+		s1 = check_dimm (1, &dimmInfo2);
+
+		memory_map_bank (0, 0, 0);
+		memory_map_bank (1, 0, 0);
+		memory_map_bank (2, 0, 0);
+		memory_map_bank (3, 0, 0);
+
+		/* ronen check correct set of DIMMS */
+		if (dimmInfo1.numOfModuleBanks && dimmInfo2.numOfModuleBanks) {
+			if (dimmInfo1.errorCheckType !=
+			    dimmInfo2.errorCheckType)
+				printf ("***WARNNING***!!!! different ECC support of the DIMMS\n");
+			if (dimmInfo1.maxClSupported_DDR !=
+			    dimmInfo2.maxClSupported_DDR)
+				printf ("***WARNNING***!!!! different CAL setting of the DIMMS\n");
+			if (dimmInfo1.registeredAddrAndControlInputs !=
+			    dimmInfo2.registeredAddrAndControlInputs)
+				printf ("***WARNNING***!!!! different Registration setting of the DIMMS\n");
+		}
+
+		if (dimmInfo1.numOfModuleBanks && setup_sdram (&dimmInfo1)) {
+			printf ("Setup for DIMM1 failed.\n");
+		}
+
+		if (dimmInfo2.numOfModuleBanks && setup_sdram (&dimmInfo2)) {
+			printf ("Setup for DIMM2 failed.\n");
+		}
+
+		/* set the NHR bit */
+		set_hid0 (get_hid0 () | (1 << 16));
+	}
+	/* next, size the SDRAM banks */
+
+	realsize = total = 0;
+	check = GB / 4;
+	if (dimmInfo1.numOfModuleBanks > 0) {
+		checkbank[0] = 1;
+	}
+	if (dimmInfo1.numOfModuleBanks > 1) {
+		checkbank[1] = 1;
+	}
+	if (dimmInfo1.numOfModuleBanks > 2)
+		printf ("Error, SPD claims DIMM1 has >2 banks\n");
+
+	printf ("-- DIMM1 has %d banks\n", dimmInfo1.numOfModuleBanks);
+
+	if (dimmInfo2.numOfModuleBanks > 0) {
+		checkbank[2] = 1;
+	}
+	if (dimmInfo2.numOfModuleBanks > 1) {
+		checkbank[3] = 1;
+	}
+	if (dimmInfo2.numOfModuleBanks > 2)
+		printf ("Error, SPD claims DIMM2 has >2 banks\n");
+
+	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
+
+	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+		/* skip over banks that are not populated */
+		if (!checkbank[bank_no])
+			continue;
+
+		/* ronen - realsize = dram_size((long int *)total, check); */
+		if (bank_no == 0 || bank_no == 1) {
+			if (checkbank[1] == 1)
+				realsize = dimmInfo1.size / 2;
+			else
+				realsize = dimmInfo1.size;
+		}
+		if (bank_no == 2 || bank_no == 3) {
+			if (checkbank[3] == 1)
+				realsize = dimmInfo2.size / 2;
+			else
+				realsize = dimmInfo2.size;
+		}
+		memory_map_bank (bank_no, total, realsize);
+
+		/* ronen - initialize the DRAM for ECC */
+#ifdef CONFIG_MV64460_ECC
+		if ((dimmInfo1.errorCheckType != 0) &&
+		    ((dimmInfo2.errorCheckType != 0)
+		     || (dimmInfo2.numOfModuleBanks == 0))) {
+			printf ("ECC Initialization of Bank %d:", bank_no);
+			memSpaceAttr = ((~(BIT0 << bank_no)) & 0xf) << 8;
+			mvDmaSetMemorySpace (0, 0, memSpaceAttr, total,
+					     realsize);
+			for (dest = total; dest < total + realsize;
+			     dest += _8M) {
+				mvDmaTransfer (0, total, dest, _8M,
+					       BIT8 /*DMA_DTL_128BYTES */  |
+					       BIT3 /*DMA_HOLD_SOURCE_ADDR */
+					       |
+					       BIT11
+					       /*DMA_BLOCK_TRANSFER_MODE */ );
+				while (mvDmaIsChannelActive (0));
+			}
+			printf (" PASS\n");
+		}
+#endif
+
+		total += realsize;
+	}
+
+	/* ronen */
+	switch ((GTREGREAD (0x141c) >> 4) & 0x7) {
+	case 0x2:
+		printf ("CAS Latency = 2");
+		break;
+	case 0x3:
+		printf ("CAS Latency = 3");
+		break;
+	case 0x5:
+		printf ("CAS Latency = 1.5");
+		break;
+	case 0x6:
+		printf ("CAS Latency = 2.5");
+		break;
+	}
+	printf (" tRP = %d tRAS = %d tRCD=%d\n",
+		((GTREGREAD (0x1408) >> 8) & 0xf) + 1,
+		((GTREGREAD (0x1408) >> 20) & 0xf) + 1,
+		((GTREGREAD (0x1408) >> 4) & 0xf) + 1);
+
+/*	Setup Ethernet DMA Adress window to DRAM Area */
+	if (total > _256M)
+		printf ("*** ONLY the first 256MB DRAM memory are used out of the ");
+	else
+		printf ("Total SDRAM memory is ");
+	/* (cause all the 4 BATS are taken) */
+	return (total);
+}
+
+
+/* ronen- add Idma functions for usage of the ecc dram init. */
+/*******************************************************************************
+* mvDmaIsChannelActive - Checks if a engine is busy.
+********************************************************************************/
+int mvDmaIsChannelActive (int engine)
+{
+	ulong data;
+
+	data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * engine);
+	if (data & BIT14 /*activity status */ ) {
+		return 1;
+	}
+	return 0;
+}
+
+/*******************************************************************************
+* mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
+*                       map.
+*******************************************************************************/
+int mvDmaSetMemorySpace (ulong memSpace,
+			 ulong memSpaceTarget,
+			 ulong memSpaceAttr, ulong baseAddress, ulong size)
+{
+	ulong temp;
+
+	/* The base address must be aligned to the size.  */
+	if (baseAddress % size != 0) {
+		return 0;
+	}
+	if (size >= 0x10000 /*64K */ ) {
+		size &= 0xffff0000;
+		baseAddress = (baseAddress & 0xffff0000);
+		/* Set the new attributes */
+		GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
+			      (baseAddress | memSpaceTarget | memSpaceAttr));
+		GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
+			      (size - 1) & 0xffff0000);
+		temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
+		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
+			      (temp & ~(BIT0 << memSpace)));
+		return 1;
+	}
+	return 0;
+}
+
+
+/*******************************************************************************
+* mvDmaTransfer - Transfer data from sourceAddr to destAddr on one of the 4
+*                 DMA channels.
+********************************************************************************/
+int mvDmaTransfer (int engine, ulong sourceAddr,
+		   ulong destAddr, ulong numOfBytes, ulong command)
+{
+	ulong engOffReg = 0;	/* Engine Offset Register */
+
+	if (numOfBytes > 0xffff) {
+		command = command | BIT31 /*DMA_16M_DESCRIPTOR_MODE */ ;
+	}
+	command = command | ((command >> 6) & 0x7);
+	engOffReg = engine * 4;
+	GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg,
+		      numOfBytes);
+	GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg,
+		      sourceAddr);
+	GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg,
+		      destAddr);
+	command =
+		command | BIT12 /*DMA_CHANNEL_ENABLE */  | BIT9
+		/*DMA_NON_CHAIN_MODE */ ;
+	/* Activate DMA engine By writting to mvDmaControlRegister */
+	GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
+	return 1;
+}
+
+/****************************************************************************************
+ *			       SDRAM INIT						*
+ *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
+ *		 This procedure fits only the Atlantis					*
+ *											*
+ ***************************************************************************************/
+
+
+/****************************************************************************************
+ *			       DFCDL initialize MV643xx Design Considerations		*
+ *											*
+ ***************************************************************************************/
+int set_dfcdlInit (void)
+{
+	/*ronen the dfcdl init are done by the I2C */
+	return (0);
+}
diff --git a/board/Marvell/db64460/u-boot.lds b/board/Marvell/db64460/u-boot.lds
new file mode 100644
index 0000000000..0dfa8c0005
--- /dev/null
+++ b/board/Marvell/db64460/u-boot.lds
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/74xx_7xx/start.o	(.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/*    . = env_offset; */
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/Marvell/include/core.h b/board/Marvell/include/core.h
new file mode 100644
index 0000000000..081d5fd678
--- /dev/null
+++ b/board/Marvell/include/core.h
@@ -0,0 +1,238 @@
+/* Core.h - Basic core logic functions and definitions */
+
+/* Copyright Galileo Technology. */
+
+/*
+DESCRIPTION
+This header file contains simple read/write macros for addressing
+the SDRAM, devices, GT`s internal registers and PCI (using the PCI`s address
+space). The macros take care of Big/Little endian conversions.
+*/
+
+#ifndef __INCcoreh
+#define __INCcoreh
+
+#include "mv_gen_reg.h"
+
+extern unsigned int INTERNAL_REG_BASE_ADDR;
+
+/****************************************/
+/*	    GENERAL Definitions			*/
+/****************************************/
+
+#define NO_BIT		0x00000000
+#define BIT0		0x00000001
+#define BIT1		0x00000002
+#define BIT2		0x00000004
+#define BIT3		0x00000008
+#define BIT4		0x00000010
+#define BIT5		0x00000020
+#define BIT6		0x00000040
+#define BIT7		0x00000080
+#define BIT8		0x00000100
+#define BIT9		0x00000200
+#define BIT10		0x00000400
+#define BIT11		0x00000800
+#define BIT12		0x00001000
+#define BIT13		0x00002000
+#define BIT14		0x00004000
+#define BIT15		0x00008000
+#define BIT16		0x00010000
+#define BIT17		0x00020000
+#define BIT18		0x00040000
+#define BIT19		0x00080000
+#define BIT20		0x00100000
+#define BIT21		0x00200000
+#define BIT22		0x00400000
+#define BIT23		0x00800000
+#define BIT24		0x01000000
+#define BIT25		0x02000000
+#define BIT26		0x04000000
+#define BIT27		0x08000000
+#define BIT28		0x10000000
+#define BIT29		0x20000000
+#define BIT30		0x40000000
+#define BIT31		0x80000000
+
+#define _1K		0x00000400
+#define _2K		0x00000800
+#define _4K		0x00001000
+#define _8K		0x00002000
+#define _16K		0x00004000
+#define _32K		0x00008000
+#define _64K		0x00010000
+#define _128K		0x00020000
+#define _256K		0x00040000
+#define _512K		0x00080000
+
+#define _1M		0x00100000
+#define _2M		0x00200000
+#define _3M		0x00300000
+#define _4M		0x00400000
+#define _5M		0x00500000
+#define _6M		0x00600000
+#define _7M		0x00700000
+#define _8M		0x00800000
+#define _9M		0x00900000
+#define _10M		0x00a00000
+#define _11M		0x00b00000
+#define _12M		0x00c00000
+#define _13M		0x00d00000
+#define _14M		0x00e00000
+#define _15M		0x00f00000
+#define _16M		0x01000000
+
+#define _32M		0x02000000
+#define _64M		0x04000000
+#define _128M		0x08000000
+#define _256M		0x10000000
+#define _512M		0x20000000
+
+#define _1G		0x40000000
+#define _2G		0x80000000
+
+typedef enum _bool{false,true} bool;
+
+/* Little to Big endian conversion macros */
+
+#ifdef LE /* Little Endian */
+#define SHORT_SWAP(X) (X)
+#define WORD_SWAP(X) (X)
+#define LONG_SWAP(X) ((l64)(X))
+
+#else	 /* Big Endian */
+#define SHORT_SWAP(X) ((X <<8 ) | (X >> 8))
+
+#define WORD_SWAP(X) (((X)&0xff)<<24)+	    \
+		    (((X)&0xff00)<<8)+	    \
+		    (((X)&0xff0000)>>8)+    \
+		    (((X)&0xff000000)>>24)
+
+#define LONG_SWAP(X) ( (l64) (((X)&0xffULL)<<56)+		\
+			    (((X)&0xff00ULL)<<40)+		\
+			    (((X)&0xff0000ULL)<<24)+		\
+			    (((X)&0xff000000ULL)<<8)+		\
+			    (((X)&0xff00000000ULL)>>8)+		\
+			    (((X)&0xff0000000000ULL)>>24)+	\
+			    (((X)&0xff000000000000ULL)>>40)+	\
+			    (((X)&0xff00000000000000ULL)>>56))
+
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+/* Those two definitions were defined to be compatible with MIPS */
+#define NONE_CACHEABLE		0x00000000
+#define CACHEABLE			0x00000000
+
+/* 750 cache line */
+#define CACHE_LINE_SIZE 32
+#define CACHELINE_MASK_BITS (CACHE_LINE_SIZE - 1)
+#define CACHELINE_ROUNDUP(A) (((A)+CACHELINE_MASK_BITS) & ~CACHELINE_MASK_BITS)
+
+/* Read/Write to/from GT`s internal registers */
+#define GT_REG_READ(offset, pData)					    \
+*pData = ( *((volatile unsigned int *)(NONE_CACHEABLE |			    \
+		INTERNAL_REG_BASE_ADDR | (offset))) ) ;						     \
+*pData = WORD_SWAP(*pData)
+
+#define GTREGREAD(offset)						    \
+	 (WORD_SWAP( *((volatile unsigned int *)(NONE_CACHEABLE |	     \
+		   INTERNAL_REG_BASE_ADDR | (offset))) ))
+
+#define GT_REG_WRITE(offset, data)					    \
+*((unsigned int *)( INTERNAL_REG_BASE_ADDR | (offset))) =		    \
+		    WORD_SWAP(data)
+
+/* Write 32/16/8 bit */
+#define WRITE_CHAR(address, data)					    \
+	*((unsigned char *)(address)) = data
+#define WRITE_SHORT(address, data)					    \
+	*((unsigned short *)(address)) = data
+#define WRITE_WORD(address, data)					    \
+	*((unsigned int *)(address)) = data
+
+#define GT_WRITE_CHAR(address, data)	 WRITE_CHAR(address, data)
+
+/* Write 32/16/8 bit NonCacheable */
+/*
+#define GT_WRITE_CHAR(address, data)					       \
+	(*((unsigned char *)NONE_CACHEABLE(address))) = data
+#define GT_WRITE_SHORT(address, data)					       \
+	(*((unsigned short *)NONE_CACHEABLE(address))) = data
+#define GT_WRITE_WORD(address, data)					       \
+	(*((unsigned int *)NONE_CACHEABLE(address))) = data
+*/
+ /*#define GT_WRITE_CHAR(address, data)	  ((*((volatile unsigned char *)NONE_CACHEABLE((address)))) = ((unsigned char)(data)))1 */
+
+ /*#define GT_WRITE_SHORT(address, data)   ((*((volatile unsigned short *)NONE_CACHEABLE((address)))) = ((unsigned short)(data)))1 */
+
+ /*#define GT_WRITE_WORD(address, data)	 ((*((volatile unsigned int *)NONE_CACHEABLE((address)))) = ((unsigned int)(data)))1 */
+
+
+/* Read 32/16/8 bits - returns data in variable. */
+#define READ_CHAR(address, pData)					    \
+	*pData = *((volatile unsigned char *)(address))
+
+#define READ_SHORT(address, pData)					    \
+	*pData = *((volatile unsigned short *)(address))
+
+#define READ_WORD(address, pData)					    \
+	*pData = *((volatile unsigned int *)(address))
+
+/* Read 32/16/8 bit - returns data direct. */
+#define READCHAR(address)						    \
+	*((volatile unsigned char *)((address) | NONE_CACHEABLE))
+
+#define READSHORT(address)						    \
+	*((volatile unsigned short *)((address) | NONE_CACHEABLE))
+
+#define READWORD(address)						    \
+	*((volatile unsigned int *)((address) | NONE_CACHEABLE))
+
+/* Those two Macros were defined to be compatible with MIPS */
+#define VIRTUAL_TO_PHY(x)    (((unsigned int)x) & 0xffffffff)
+#define PHY_TO_VIRTUAL(x)    (((unsigned int)x) | NONE_CACHEABLE)
+
+/*  SET_REG_BITS(regOffset,bits) -
+   gets register offset and bits: a 32bit value. It set to logic '1' in the
+   internal register the bits which given as an input example:
+   SET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
+   '1' in register 0x840 while the other bits stays as is. */
+#define SET_REG_BITS(regOffset,bits) \
+	*(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR |  \
+	regOffset) |= (unsigned int)WORD_SWAP(bits)
+
+/*  RESET_REG_BITS(regOffset,bits) -
+   gets register offset and bits: a 32bit value. It set to logic '0' in the
+   internal register the bits which given as an input example:
+   RESET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
+   '0' in register 0x840 while the other bits stays as is. */
+#define RESET_REG_BITS(regOffset,bits) \
+	*(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR   \
+	| regOffset) &= ~( (unsigned int)WORD_SWAP(bits) )
+/* gets register offset and bits: a 32bit value. It set to logic '1' in the
+   internal register the bits which given as an input example:
+   GT_SET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
+   '1' in register 0x840 while the other bits stays as is. */
+ /*#define GT_SET_REG_BITS(regOffset,bits)	((*((volatile unsigned int*)(NONE_CACHEABLE(INTERNAL_REG_BASE_ADDR) | (regOffset)))) |= ((unsigned int)WORD_SWAP(bits)))1 */
+ /*#define GT_SET_REG_BITS(regOffset,bits) RESET_REG_BITS(regOffset,bits)1 */
+#define GT_SET_REG_BITS(regOffset,bits) SET_REG_BITS(regOffset,bits)
+/* gets register offset and bits: a 32bit value. It set to logic '0' in the
+   internal register the bits which given as an input example:
+   GT_RESET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to
+   logic '0' in register 0x840 while the other bits stays as is. */
+ /*#define GT_RESET_REG_BITS(regOffset,bits)	((*((volatile unsigned int*)(NONE_CACHEABLE(INTERNAL_REG_BASE_ADDR) |  (regOffset)))) &= ~((unsigned int)WORD_SWAP(bits)))1 */
+#define GT_RESET_REG_BITS(regOffset,bits) RESET_REG_BITS(regOffset,bits)
+
+
+#define DEBUG_LED0_ON()	       WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x8000,0)
+#define DEBUG_LED1_ON()	       WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0xc000,0)
+#define DEBUG_LED2_ON()	       WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x10000,0)
+#define DEBUG_LED0_OFF()      WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x14000,0)
+#define DEBUG_LED1_OFF()      WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x18000,0)
+#define DEBUG_LED2_OFF()      WRITE_CHAR(memoryGetDeviceBaseAddress(DEVICE1) | 0x1c000,0)
+
+#endif /* __INCcoreh */
diff --git a/board/Marvell/include/memory.h b/board/Marvell/include/memory.h
new file mode 100644
index 0000000000..0947b6e4ff
--- /dev/null
+++ b/board/Marvell/include/memory.h
@@ -0,0 +1,173 @@
+/* Memory.h - Memory mappings and remapping functions declarations */
+
+/* Copyright - Galileo technology. */
+
+#ifndef __INCmemoryh
+#define __INCmemoryh
+
+/* includes */
+
+#include "core.h"
+
+/* defines */
+
+#define DONT_MODIFY	0xffffffff
+#define PARITY_SUPPORT	0x40000000
+#define MINIMUM_MEM_BANK_SIZE		0x10000
+#define MINIMUM_DEVICE_WINDOW_SIZE	0x10000
+#define MINIMUM_PCI_WINDOW_SIZE		0x10000
+#define MINIMUM_ACCESS_WIN_SIZE		0x10000
+
+#define _8BIT		0x00000000
+#define _16BIT		0x00100000
+#define _32BIT		0x00200000
+#define _64BIT		0x00300000
+
+/* typedefs */
+
+ typedef struct deviceParam
+{						/* boundary values  */
+    unsigned int    turnOff;			/* 0x0 - 0xf	    */
+    unsigned int    acc2First;			/* 0x0 - 0x1f	    */
+    unsigned int    acc2Next;		/* 0x0 - 0x1f	    */
+    unsigned int    ale2Wr;			/* 0x0 - 0xf	    */
+    unsigned int    wrLow;			/* 0x0 - 0xf	    */
+    unsigned int    wrHigh;			/* 0x0 - 0xf	    */
+    unsigned int    badrSkew;		/* 0x0 - 0x2	   */
+    unsigned int    DPEn;			/* 0x0 - 0x1	   */
+    unsigned int    deviceWidth;	/* in Bytes  */
+} DEVICE_PARAM;
+
+
+typedef enum __memBank{BANK0,BANK1,BANK2,BANK3} MEMORY_BANK;
+typedef enum __memDevice{DEVICE0,DEVICE1,DEVICE2,DEVICE3,BOOT_DEVICE} DEVICE;
+
+/*typedef enum __memoryProtectRegion{MEM_REGION0,MEM_REGION1,MEM_REGION2,	\
+				   MEM_REGION3,MEM_REGION4,MEM_REGION5,	      \
+				   MEM_REGION6,MEM_REGION7}		      \
+				   MEMORY_PROTECT_REGION;*/
+/* There are four possible windows that can be defined as protected */
+typedef enum _memoryProtectWindow{MEM_WINDOW0,MEM_WINDOW1,MEM_WINDOW2,
+				  MEM_WINDOW3
+				 } MEMORY_PROTECT_WINDOW;
+/* When defining a protected window , this paramter indicates whether it
+   is accessible or not */
+typedef enum __memoryAccess{MEM_ACCESS_ALLOWED,MEM_ACCESS_FORBIDEN}	      \
+			    MEMORY_ACCESS;
+typedef enum __memoryWrite{MEM_WRITE_ALLOWED,MEM_WRITE_FORBIDEN}	      \
+			   MEMORY_ACCESS_WRITE;
+typedef enum __memoryCacheProtect{MEM_CACHE_ALLOWED,MEM_CACHE_FORBIDEN}	      \
+				  MEMORY_CACHE_PROTECT;
+typedef enum __memorySnoopType{MEM_NO_SNOOP,MEM_SNOOP_WT,MEM_SNOOP_WB}	      \
+			       MEMORY_SNOOP_TYPE;
+typedef enum __memorySnoopRegion{MEM_SNOOP_REGION0,MEM_SNOOP_REGION1,	      \
+				 MEM_SNOOP_REGION2,MEM_SNOOP_REGION3}	      \
+				 MEMORY_SNOOP_REGION;
+
+/* There are 21 memory windows dedicated for the varios interfaces (PCI,
+   devCS (devices), CS(DDR), interenal registers and SRAM) used by the CPU's
+   address decoding mechanism. */
+typedef enum _memoryWindow {CS_0_WINDOW = BIT0, CS_1_WINDOW = BIT1,
+			    CS_2_WINDOW = BIT2, CS_3_WINDOW = BIT3,
+			    DEVCS_0_WINDOW = BIT4, DEVCS_1_WINDOW = BIT5,
+			    DEVCS_2_WINDOW = BIT6, DEVCS_3_WINDOW = BIT7,
+			    BOOT_CS_WINDOW = BIT8, PCI_0_IO_WINDOW = BIT9,
+			    PCI_0_MEM0_WINDOW = BIT10,
+			    PCI_0_MEM1_WINDOW = BIT11,
+			    PCI_0_MEM2_WINDOW = BIT12,
+			    PCI_0_MEM3_WINDOW = BIT13, PCI_1_IO_WINDOW = BIT14,
+			    PCI_1_MEM0_WINDOW = BIT15, PCI_1_MEM1_WINDOW =BIT16,
+			    PCI_1_MEM2_WINDOW = BIT17, PCI_1_MEM3_WINDOW =BIT18,
+			    INTEGRATED_SRAM_WINDOW = BIT19,
+			    INTERNAL_SPACE_WINDOW = BIT20,
+			    ALL_WINDOWS = 0X1FFFFF
+			   } MEMORY_WINDOW;
+
+typedef enum _memoryWindowStatus {MEM_WINDOW_ENABLED,MEM_WINDOW_DISABLED
+				 } MEMORY_WINDOW_STATUS;
+
+
+typedef enum _pciMemWindow{PCI_0_IO,PCI_0_MEM0,PCI_0_MEM1,PCI_0_MEM2,PCI_0_MEM3
+#ifdef INCLUDE_PCI_1
+			  ,PCI_1_IO,PCI_1_MEM0,PCI_1_MEM1,PCI_1_MEM2,PCI_1_MEM3
+#endif /* INCLUDE_PCI_1 */
+			  } PCI_MEM_WINDOW;
+
+
+/* -------------------------------------------------------------------------------------------------*/
+
+/* functions */
+unsigned int memoryGetBankBaseAddress(MEMORY_BANK bank);
+unsigned int memoryGetDeviceBaseAddress(DEVICE device);
+/* New at MV6436x */
+unsigned int MemoryGetPciBaseAddr(PCI_MEM_WINDOW pciWindow);
+unsigned int memoryGetBankSize(MEMORY_BANK bank);
+unsigned int memoryGetDeviceSize(DEVICE device);
+unsigned int memoryGetDeviceWidth(DEVICE device);
+/* New at MV6436x */
+unsigned int gtMemoryGetPciWindowSize(PCI_MEM_WINDOW pciWindow);
+
+/* when given base Address and size Set new WINDOW for SCS_X. (X = 0,1,2 or 3*/
+bool memoryMapBank(MEMORY_BANK bank, unsigned int bankBase,unsigned int bankLength);
+/* Set a new base and size for one of the memory banks (CS0 - CS3) */
+bool gtMemorySetMemoryBank(MEMORY_BANK bank, unsigned int bankBase,
+			   unsigned int bankSize);
+bool memoryMapDeviceSpace(DEVICE device, unsigned int deviceBase,unsigned int deviceLength);
+
+/* Change the Internal Register Base Address to a new given Address. */
+bool memoryMapInternalRegistersSpace(unsigned int internalRegBase);
+/* returns internal Register Space Base Address. */
+unsigned int memoryGetInternalRegistersSpace(void);
+
+/* Returns the integrated SRAM Base Address. */
+unsigned int memoryGetInternalSramBaseAddr(void);
+/* -------------------------------------------------------------------------------------------------*/
+
+/* Set new base address for the integrated SRAM. */
+void memorySetInternalSramBaseAddr(unsigned int sramBaseAddress);
+/* -------------------------------------------------------------------------------------------------*/
+
+/* Delete a protection feature to a given space. */
+void memoryDisableProtectRegion(MEMORY_PROTECT_WINDOW window);
+/* -------------------------------------------------------------------------------------------------*/
+
+/* Writes a new remap value to the remap register */
+unsigned int memorySetPciRemapValue(PCI_MEM_WINDOW memoryWindow,
+				      unsigned int remapValueHigh,
+				      unsigned int remapValueLow);
+/* -------------------------------------------------------------------------------------------------*/
+
+/* Configurate the protection feature to a given space. */
+bool memorySetProtectRegion(MEMORY_PROTECT_WINDOW window,
+			      MEMORY_ACCESS gtMemoryAccess,
+			      MEMORY_ACCESS_WRITE gtMemoryWrite,
+			      MEMORY_CACHE_PROTECT cacheProtection,
+			      unsigned int baseAddress,
+			      unsigned int size);
+
+/* Configurate the protection feature to a given space. */
+/*bool memorySetProtectRegion(MEMORY_PROTECT_REGION region,
+			    MEMORY_ACCESS memoryAccess,
+			    MEMORY_ACCESS_WRITE memoryWrite,
+			    MEMORY_CACHE_PROTECT cacheProtection,
+			    unsigned int baseAddress,
+			    unsigned int regionLength); */
+/* Configurate the snoop feature to a given space. */
+bool memorySetRegionSnoopMode(MEMORY_SNOOP_REGION region,
+			      MEMORY_SNOOP_TYPE snoopType,
+			      unsigned int baseAddress,
+			      unsigned int regionLength);
+
+bool memoryRemapAddress(unsigned int remapReg, unsigned int remapValue);
+bool memoryGetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum);
+bool memorySetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum);
+/* Set a new base and size for one of the PCI windows. */
+bool memorySetPciWindow(PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
+			  unsigned int pciWindowSize);
+
+/* Disable or enable one of the 21 windows dedicated for the CPU's
+   address decoding mechanism */
+void MemoryDisableWindow(MEMORY_WINDOW window);
+void MemoryEnableWindow (MEMORY_WINDOW window);
+MEMORY_WINDOW_STATUS MemoryGetMemWindowStatus(MEMORY_WINDOW window);
+#endif	/* __INCmemoryh */
diff --git a/board/Marvell/include/mv_gen_reg.h b/board/Marvell/include/mv_gen_reg.h
new file mode 100644
index 0000000000..5e4f07606c
--- /dev/null
+++ b/board/Marvell/include/mv_gen_reg.h
@@ -0,0 +1,2288 @@
+/* mv_gen_reg.h - Internal registers definition file */
+/* Copyright - Galileo technology. */
+
+
+/*******************************************************************************
+*		    Copyright 2002, GALILEO TECHNOLOGY, LTD.		       *
+* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL.		       *
+* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT  *
+* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE	       *
+* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL.     *
+* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED,       *
+* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE.   *
+*									       *
+* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, *
+* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL    *
+* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K.  *
+* (MJKK), GALILEO TECHNOLOGY LTD. (GTL) AND GALILEO TECHNOLOGY, INC. (GTI).    *
+********************************************************************************
+* mv_gen_reg.h - Marvell 64360 and 64460 Internal registers definition file.
+*
+* DESCRIPTION:
+*	None.
+*
+* DEPENDENCIES:
+*	None.
+*
+*******************************************************************************/
+
+#ifndef __INCmv_gen_regh
+#define __INCmv_gen_regh
+
+
+/* Supported by the Atlantis */
+#define INCLUDE_PCI_1
+#define INCLUDE_PCI_0_ARBITER
+#define INCLUDE_PCI_1_ARBITER
+#define INCLUDE_SNOOP_SUPPORT
+#define INCLUDE_P2P
+#define INCLUDE_ETH_PORT_2
+#define INCLUDE_CPU_MAPPING
+#define INCLUDE_MPSC
+
+/* Not supported features */
+#undef	INCLUDE_CNTMR_4_7
+#undef	INCLUDE_DMA_4_7
+
+
+/****************************************/
+/* Processor Address Space				*/
+/****************************************/
+/* DDR SDRAM BAR and size registers */
+
+/* Sdram's BAR'S */
+#define SCS_0_LOW_DECODE_ADDRESS			0x008
+#define SCS_0_HIGH_DECODE_ADDRESS			0x010
+#define SCS_1_LOW_DECODE_ADDRESS			0x208
+#define SCS_1_HIGH_DECODE_ADDRESS			0x210
+#define SCS_2_LOW_DECODE_ADDRESS			0x018
+#define SCS_2_HIGH_DECODE_ADDRESS			0x020
+#define SCS_3_LOW_DECODE_ADDRESS			0x218
+#define SCS_3_HIGH_DECODE_ADDRESS			0x220
+
+/* Make it fit the MV64360 and MV64460 Lowlevel driver */
+#define CS_0_BASE_ADDR			SCS_0_LOW_DECODE_ADDRESS
+#define CS_0_SIZE			SCS_0_HIGH_DECODE_ADDRESS
+#define CS_1_BASE_ADDR		SCS_1_LOW_DECODE_ADDRESS
+#define CS_1_SIZE			SCS_1_HIGH_DECODE_ADDRESS
+#define CS_2_BASE_ADDR		SCS_2_LOW_DECODE_ADDRESS
+#define CS_2_SIZE			SCS_2_HIGH_DECODE_ADDRESS
+#define CS_3_BASE_ADDR		SCS_3_LOW_DECODE_ADDRESS
+#define CS_3_SIZE			SCS_3_HIGH_DECODE_ADDRESS
+
+/* Devices BAR'S */
+#define CS_0_LOW_DECODE_ADDRESS			0x028
+#define CS_0_HIGH_DECODE_ADDRESS			0x030
+#define CS_1_LOW_DECODE_ADDRESS			0x228
+#define CS_1_HIGH_DECODE_ADDRESS			0x230
+#define CS_2_LOW_DECODE_ADDRESS			0x248
+#define CS_2_HIGH_DECODE_ADDRESS			0x250
+#define CS_3_LOW_DECODE_ADDRESS			0x038
+#define CS_3_HIGH_DECODE_ADDRESS			0x040
+#define BOOTCS_LOW_DECODE_ADDRESS			0x238
+#define BOOTCS_HIGH_DECODE_ADDRESS			0x240
+
+/* Make it fit the MV64360 and MV64460 Lowlevel driver */
+/* Devices BAR and size registers */
+
+#define DEV_CS0_BASE_ADDR	CS_0_LOW_DECODE_ADDRESS
+#define DEV_CS0_SIZE			CS_0_HIGH_DECODE_ADDRESS
+#define DEV_CS1_BASE_ADDR	CS_1_LOW_DECODE_ADDRESS
+#define DEV_CS1_SIZE		CS_1_HIGH_DECODE_ADDRESS
+#define DEV_CS2_BASE_ADDR	CS_2_LOW_DECODE_ADDRESS
+#define DEV_CS2_SIZE			CS_2_HIGH_DECODE_ADDRESS
+#define DEV_CS3_BASE_ADDR		CS_3_LOW_DECODE_ADDRESS
+#define DEV_CS3_SIZE		CS_3_HIGH_DECODE_ADDRESS
+#define BOOTCS_BASE_ADDR	BOOTCS_LOW_DECODE_ADDRESS
+#define BOOTCS_SIZE		BOOTCS_HIGH_DECODE_ADDRESS
+
+/* PCI 0 BAR and size registers	 old names of evb64260*/
+
+#define PCI_0I_O_LOW_DECODE_ADDRESS			0x048
+#define PCI_0I_O_HIGH_DECODE_ADDRESS			0x050
+#define PCI_0MEMORY0_LOW_DECODE_ADDRESS		0x058
+#define PCI_0MEMORY0_HIGH_DECODE_ADDRESS		0x060
+#define PCI_0MEMORY1_LOW_DECODE_ADDRESS		0x080
+#define PCI_0MEMORY1_HIGH_DECODE_ADDRESS		0x088
+#define PCI_0MEMORY2_LOW_DECODE_ADDRESS		0x258
+#define PCI_0MEMORY2_HIGH_DECODE_ADDRESS		0x260
+#define PCI_0MEMORY3_LOW_DECODE_ADDRESS		0x280
+#define PCI_0MEMORY3_HIGH_DECODE_ADDRESS		0x288
+
+/* Make it fit the MV64360 and MV64460 Lowlevel driver */
+#define PCI_0_IO_BASE_ADDR						0x048
+#define PCI_0_IO_SIZE							0x050
+#define PCI_0_MEMORY0_BASE_ADDR					0x058
+#define PCI_0_MEMORY0_SIZE						0x060
+#define PCI_0_MEMORY1_BASE_ADDR					0x080
+#define PCI_0_MEMORY1_SIZE						0x088
+#define PCI_0_MEMORY2_BASE_ADDR					0x258
+#define PCI_0_MEMORY2_SIZE						0x260
+#define PCI_0_MEMORY3_BASE_ADDR					0x280
+#define PCI_0_MEMORY3_SIZE						0x288
+
+/* PCI 1 BAR and size registers	 old names of evb64260*/
+#define PCI_1I_O_LOW_DECODE_ADDRESS			0x090
+#define PCI_1I_O_HIGH_DECODE_ADDRESS			0x098
+#define PCI_1MEMORY0_LOW_DECODE_ADDRESS		0x0a0
+#define PCI_1MEMORY0_HIGH_DECODE_ADDRESS		0x0a8
+#define PCI_1MEMORY1_LOW_DECODE_ADDRESS		0x0b0
+#define PCI_1MEMORY1_HIGH_DECODE_ADDRESS		0x0b8
+#define PCI_1MEMORY2_LOW_DECODE_ADDRESS		0x2a0
+#define PCI_1MEMORY2_HIGH_DECODE_ADDRESS		0x2a8
+#define PCI_1MEMORY3_LOW_DECODE_ADDRESS		0x2b0
+#define PCI_1MEMORY3_HIGH_DECODE_ADDRESS		0x2b8
+
+/* Make it fit the MV64360 and MV64460 Lowlevel driver */
+#define PCI_1_IO_BASE_ADDR						0x090
+#define PCI_1_IO_SIZE							0x098
+#define PCI_1_MEMORY0_BASE_ADDR					0x0a0
+#define PCI_1_MEMORY0_SIZE						0x0a8
+#define PCI_1_MEMORY1_BASE_ADDR					0x0b0
+#define PCI_1_MEMORY1_SIZE						0x0b8
+#define PCI_1_MEMORY2_BASE_ADDR					0x2a0
+#define PCI_1_MEMORY2_SIZE						0x2a8
+#define PCI_1_MEMORY3_BASE_ADDR					0x2b0
+#define PCI_1_MEMORY3_SIZE						0x2b8
+
+/* internal registers space base address */
+#define INTERNAL_SPACE_DECODE				0x068
+#define INTERNAL_SPACE_BASE_ADDR				INTERNAL_SPACE_DECODE
+
+/* SRAM base address */
+#define INTEGRATED_SRAM_BASE_ADDR				0x268
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+   windows above */
+#define BASE_ADDR_ENABLE						0x278
+
+
+#define CPU_0_LOW_DECODE_ADDRESS				0x290
+#define CPU_0_HIGH_DECODE_ADDRESS				0x298
+#define CPU_1_LOW_DECODE_ADDRESS				0x2c0
+#define CPU_1_HIGH_DECODE_ADDRESS				0x2c8
+
+/****************************************/
+/* PCI remap registers			*/
+/****************************************/
+/*****************************************************************************************/
+      /* PCI 0 */
+/* old fashion evb 64260 */
+#define PCI_0I_O_ADDRESS_REMAP				0x0f0
+#define PCI_0MEMORY0_ADDRESS_REMAP			0x0f8
+#define PCI_0MEMORY0_HIGH_ADDRESS_REMAP		0x320
+#define PCI_0MEMORY1_ADDRESS_REMAP			0x100
+#define PCI_0MEMORY1_HIGH_ADDRESS_REMAP		0x328
+#define PCI_0MEMORY2_ADDRESS_REMAP			0x2f8
+#define PCI_0MEMORY2_HIGH_ADDRESS_REMAP		0x330
+#define PCI_0MEMORY3_ADDRESS_REMAP			0x300
+#define PCI_0MEMORY3_HIGH_ADDRESS_REMAP		0x338
+
+#define PCI_0_IO_ADDR_REMAP						PCI_0I_O_ADDRESS_REMAP
+#define PCI_0_MEMORY0_LOW_ADDR_REMAP				PCI_0MEMORY0_ADDRESS_REMAP
+#define PCI_0_MEMORY0_HIGH_ADDR_REMAP				PCI_0MEMORY0_HIGH_ADDRESS_REMAP
+#define PCI_0_MEMORY1_LOW_ADDR_REMAP				PCI_0MEMORY1_ADDRESS_REMAP
+#define PCI_0_MEMORY1_HIGH_ADDR_REMAP				PCI_0MEMORY1_HIGH_ADDRESS_REMAP
+#define PCI_0_MEMORY2_LOW_ADDR_REMAP				PCI_0MEMORY2_ADDRESS_REMAP
+#define PCI_0_MEMORY2_HIGH_ADDR_REMAP				PCI_0MEMORY2_HIGH_ADDRESS_REMAP
+#define PCI_0_MEMORY3_LOW_ADDR_REMAP				PCI_0MEMORY3_ADDRESS_REMAP
+#define PCI_0_MEMORY3_HIGH_ADDR_REMAP				PCI_0MEMORY3_HIGH_ADDRESS_REMAP
+
+       /* PCI 1 */
+/* old fashion evb 64260 */
+#define PCI_1I_O_ADDRESS_REMAP				0x108
+#define PCI_1MEMORY0_ADDRESS_REMAP			0x110
+#define PCI_1MEMORY0_HIGH_ADDRESS_REMAP		0x340
+#define PCI_1MEMORY1_ADDRESS_REMAP			0x118
+#define PCI_1MEMORY1_HIGH_ADDRESS_REMAP		0x348
+#define PCI_1MEMORY2_ADDRESS_REMAP			0x310
+#define PCI_1MEMORY2_HIGH_ADDRESS_REMAP		0x350
+#define PCI_1MEMORY3_ADDRESS_REMAP			0x318
+#define PCI_1MEMORY3_HIGH_ADDRESS_REMAP		0x358
+
+#define PCI_1_IO_ADDR_REMAP						PCI_1I_O_ADDRESS_REMAP
+#define PCI_1_MEMORY0_LOW_ADDR_REMAP				PCI_1MEMORY0_ADDRESS_REMAP
+#define PCI_1_MEMORY0_HIGH_ADDR_REMAP				PCI_1MEMORY0_HIGH_ADDRESS_REMAP
+#define PCI_1_MEMORY1_LOW_ADDR_REMAP				PCI_1MEMORY1_ADDRESS_REMAP
+#define PCI_1_MEMORY1_HIGH_ADDR_REMAP				PCI_1MEMORY1_HIGH_ADDRESS_REMAP
+#define PCI_1_MEMORY2_LOW_ADDR_REMAP				PCI_1MEMORY2_ADDRESS_REMAP
+#define PCI_1_MEMORY2_HIGH_ADDR_REMAP				PCI_1MEMORY2_HIGH_ADDRESS_REMAP
+#define PCI_1_MEMORY3_LOW_ADDR_REMAP				PCI_1MEMORY3_ADDRESS_REMAP
+#define PCI_1_MEMORY3_HIGH_ADDR_REMAP				PCI_1MEMORY3_HIGH_ADDRESS_REMAP
+
+/* old fashion evb 64260 */
+#define CPU_PCI_0_HEADERS_RETARGET_CONTROL			0x3b0
+#define CPU_PCI_0_HEADERS_RETARGET_BASE				0x3b8
+#define CPU_PCI_1_HEADERS_RETARGET_CONTROL			0x3c0
+#define CPU_PCI_1_HEADERS_RETARGET_BASE				0x3c8
+#define CPU_GE_HEADERS_RETARGET_CONTROL				0x3d0
+#define CPU_GE_HEADERS_RETARGET_BASE				0x3d8
+
+/* MV64360 and MV64460 no changes needed*/
+/*****************************************************************************************/
+
+/****************************************/
+/*	   CPU Control Registers	*/
+/****************************************/
+/* CPU MASTER CONTROL REGISTER */
+#define CPU_CONFIGURATION				0x000
+#define CPU_MASTER_CONTROL				0x160
+
+#define CPU_CONFIG							0x000
+#define CPU_MODE							0x120
+#define CPU_MASTER_CONTROL						0x160
+/* new in MV64360 and MV64460 */
+#define CPU_CROSS_BAR_CONTROL_LOW				0x150
+#define CPU_CROSS_BAR_CONTROL_HIGH				0x158
+#define CPU_CROSS_BAR_TIMEOUT					0x168
+
+/****************************************/
+/* SMP RegisterS			*/
+/****************************************/
+
+#define SMP_WHO_AM_I							0x200
+#define SMP_CPU0_DOORBELL						0x214
+#define SMP_CPU0_DOORBELL_CLEAR					0x21C
+#define SMP_CPU1_DOORBELL						0x224
+#define SMP_CPU1_DOORBELL_CLEAR					0x22C
+#define SMP_CPU0_DOORBELL_MASK					0x234
+#define SMP_CPU1_DOORBELL_MASK					0x23C
+#define SMP_SEMAPHOR0							0x244
+#define SMP_SEMAPHOR1							0x24c
+#define SMP_SEMAPHOR2							0x254
+#define SMP_SEMAPHOR3							0x25c
+#define SMP_SEMAPHOR4							0x264
+#define SMP_SEMAPHOR5							0x26c
+#define SMP_SEMAPHOR6							0x274
+#define SMP_SEMAPHOR7							0x27c
+
+
+/****************************************/
+/* CPU Sync Barrier				*/
+/****************************************/
+#define CPU_0_SYNC_BARRIER_TRIGGER				0x0c0
+#define CPU_0_SYNC_BARRIER_VIRTUAL				0x0c8
+#define CPU_1_SYNC_BARRIER_TRIGGER				0x0d0
+#define CPU_1_SYNC_BARRIER_VIRTUAL				0x0d8
+
+
+/****************************************/
+/* CPU Access Protect			*/
+/****************************************/
+
+#define CPU_LOW_PROTECT_ADDRESS_0			    0x180
+#define CPU_HIGH_PROTECT_ADDRESS_0			    0x188
+#define CPU_LOW_PROTECT_ADDRESS_1			    0x190
+#define CPU_HIGH_PROTECT_ADDRESS_1			    0x198
+#define CPU_LOW_PROTECT_ADDRESS_2			    0x1a0
+#define CPU_HIGH_PROTECT_ADDRESS_2			    0x1a8
+#define CPU_LOW_PROTECT_ADDRESS_3			    0x1b0
+#define CPU_HIGH_PROTECT_ADDRESS_3			    0x1b8
+/*#define CPU_LOW_PROTECT_ADDRESS_4			      0x1c0
+#define CPU_HIGH_PROTECT_ADDRESS_4			    0x1c8
+#define CPU_LOW_PROTECT_ADDRESS_5			    0x1d0
+#define CPU_HIGH_PROTECT_ADDRESS_5			    0x1d8
+#define CPU_LOW_PROTECT_ADDRESS_6			    0x1e0
+#define CPU_HIGH_PROTECT_ADDRESS_6			    0x1e8
+#define CPU_LOW_PROTECT_ADDRESS_7			    0x1f0
+#define CPU_HIGH_PROTECT_ADDRESS_7			    0x1f8
+*/
+
+#define CPU_PROTECT_WINDOW_0_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_0 /* 0x180 */
+#define CPU_PROTECT_WINDOW_0_SIZE			    CPU_HIGH_PROTECT_ADDRESS_0 /* 0x188 */
+#define CPU_PROTECT_WINDOW_1_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_1 /* 0x190 */
+#define CPU_PROTECT_WINDOW_1_SIZE			    CPU_HIGH_PROTECT_ADDRESS_1 /* 0x198 */
+#define CPU_PROTECT_WINDOW_2_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_2 /*0x1a0 */
+#define CPU_PROTECT_WINDOW_2_SIZE			    CPU_HIGH_PROTECT_ADDRESS_2 /* 0x1a8 */
+#define CPU_PROTECT_WINDOW_3_BASE_ADDR		     CPU_LOW_PROTECT_ADDRESS_3 /* 0x1b0 */
+#define CPU_PROTECT_WINDOW_3_SIZE			    CPU_HIGH_PROTECT_ADDRESS_3 /* 0x1b8 */
+
+
+/****************************************/
+/*	    Snoop Control			*/
+/****************************************/
+
+/*#define SNOOP_BASE_ADDRESS_0				      0x380
+#define SNOOP_TOP_ADDRESS_0				    0x388
+#define SNOOP_BASE_ADDRESS_1				    0x390
+#define SNOOP_TOP_ADDRESS_1				    0x398
+#define SNOOP_BASE_ADDRESS_2				    0x3a0
+#define SNOOP_TOP_ADDRESS_2				    0x3a8
+#define SNOOP_BASE_ADDRESS_3				    0x3b0
+#define SNOOP_TOP_ADDRESS_3				    0x3b8
+*/
+
+/****************************************/
+/*  Integrated SRAM Registers		*/
+/****************************************/
+
+#define SRAM_CONFIG						0x380
+#define SRAM_TEST_MODE						0x3F4
+#define SRAM_ERROR_CAUSE					0x388
+#define SRAM_ERROR_ADDR						0x390
+#define SRAM_ERROR_ADDR_HIGH					0x3F8
+#define SRAM_ERROR_DATA_LOW					0x398
+#define SRAM_ERROR_DATA_HIGH					0x3a0
+#define SRAM_ERROR_DATA_PARITY					0x3a8
+
+/****************************************/
+/*	    CPU Error Report			*/
+/****************************************/
+
+#define CPU_ERROR_ADDRESS_LOW		0x070
+#define CPU_ERROR_ADDRESS_HIGH		0x078
+#define CPU_ERROR_DATA_LOW					0x128
+#define CPU_ERROR_DATA_HIGH					0x130
+#define CPU_ERROR_PARITY					0x138
+#define CPU_ERROR_CAUSE						0x140
+#define CPU_ERROR_MASK						0x148
+
+#define CPU_ERROR_ADDR_LOW					CPU_ERROR_ADDRESS_LOW  /* 0x0701 */
+#define CPU_ERROR_ADDR_HIGH					CPU_ERROR_ADDRESS_HIGH	/* 0x0781 */
+
+/****************************************/
+/*	    Pslave Debug			*/
+/*	CPU Interface Debug Registers	*/
+/****************************************/
+
+#define X_0_ADDRESS						0x360
+#define X_0_COMMAND_ID						0x368
+#define X_1_ADDRESS						0x370
+#define X_1_COMMAND_ID						0x378
+ /*#define WRITE_DATA_LOW					0x3c01 */
+ /*#define WRITE_DATA_HIGH					0x3c81 */
+ /*#define WRITE_BYTE_ENABLE					0x3e01 */
+ /*#define READ_DATA_LOW					0x3d01 */
+ /*#define READ_DATA_HIGH					0x3d81 */
+ /*#define READ_ID						0x3e81 */
+
+#define PUNIT_SLAVE_DEBUG_LOW					X_0_ADDRESS  /* 0x3601 */
+#define PUNIT_SLAVE_DEBUG_HIGH					X_0_COMMAND_ID	/* 0x3681 */
+#define PUNIT_MASTER_DEBUG_LOW					X_1_ADDRESS  /* 0x3701 */
+#define PUNIT_MASTER_DEBUG_HIGH				   X_1_COMMAND_ID  /* 0x3781 */
+#define PUNIT_MMASK						0x3e4
+
+
+/****************************************/
+/* SDRAM and Device Address Space		*/
+/****************************************/
+
+/****************************************/
+/* SDRAM Configuration			*/
+/****************************************/
+#define SDRAM_CONFIG						0x1400	/* MV64260 0x448 some changes*/
+#define D_UNIT_CONTROL_LOW					0x1404	/* NEW in MV64360 and MV64460 */
+#define D_UNIT_CONTROL_HIGH					0x1424	/* NEW in MV64360 and MV64460 */
+#define SDRAM_TIMING_CONTROL_LOW			0x1408	/* MV64260 0x4b4 new SDRAM TIMING REGISTER */
+#define SDRAM_TIMING_CONTROL_HIGH			0x140c	/* MV64260 0x4b4 new SDRAM TIMING REGISTER */
+#define SDRAM_ADDR_CONTROL				    0x1410	/* MV64260 0x47c some changes*/
+#define SDRAM_OPEN_PAGES_CONTROL			0x1414	/* NEW in MV64360 and MV64460 */
+#define SDRAM_OPERATION						0x1418	/* MV64260 0x474 some changes*/
+#define SDRAM_MODE						0x141c	/* NEW in MV64360 and MV64460 */
+#define EXTENDED_DRAM_MODE					0x1420	/* NEW in MV64360 and MV64460 */
+#define SDRAM_CROSS_BAR_CONTROL_LOW			0x1430	/* MV64260 0x4a8 NO changes*/
+#define SDRAM_CROSS_BAR_CONTROL_HIGH			0x1434	/* MV64260 0x4ac NO changes*/
+#define SDRAM_CROSS_BAR_TIMEOUT				0x1438	/* MV64260 0x4b0 NO changes*/
+#define SDRAM_ADDR_CTRL_PADS_CALIBRATION	0x14c0	/* what is this ??? */
+#define SDRAM_DATA_PADS_CALIBRATION			0x14c4	/* what is this ??? */
+/****************************************/
+/* SDRAM Configuration MV64260			*/
+/****************************************/
+ /*#define SDRAM_CONFIGURATION			0x4481 */
+ /*#define SDRAM_OPERATION_MODE			0x4741 */
+ /*#define SDRAM_ADDRESS_DECODE		0x47c1 */
+ /*#define SDRAM_UMA_CONTROL			0x4a4	eliminated in MV64360 and MV64460 */
+ /*#define SDRAM_CROSS_BAR_CONTROL_LOW	0x4a81 */
+ /*#define SDRAM_CROSS_BAR_CONTROL_HIGH 0x4ac1 */
+ /*#define SDRAM_CROSS_BAR_TIMEOUT		0x4b01 */
+ /*#define SDRAM_TIMING				0x4b41 */
+
+
+/****************************************/
+/* SDRAM Error Report			*/
+/****************************************/
+#define SDRAM_ERROR_DATA_LOW				0x1444	/* MV64260 0x484 NO changes*/
+#define SDRAM_ERROR_DATA_HIGH					0x1440	/* MV64260 0x480 NO changes*/
+#define SDRAM_ERROR_ADDR					0x1450	/* MV64260 0x490 NO changes*/
+#define SDRAM_RECEIVED_ECC					0x1448	/* MV64260 0x488 NO changes*/
+#define SDRAM_CALCULATED_ECC					0x144c	/* MV64260 0x48c NO changes*/
+#define SDRAM_ECC_CONTROL					0x1454	/* MV64260 0x494 NO changes*/
+#define SDRAM_ECC_ERROR_COUNTER				0x1458	/* MV64260 0x498 NO changes*/
+#define SDRAM_MMASK					0x1B40	/* NEW Register in MV64360 and MV64460 DO NOT USE !!!*/
+/****************************************/
+/* SDRAM Error Report MV64260			*/
+/****************************************/
+ /*#define SDRAM_ERROR_DATA_LOW					0x4841 */
+ /*#define SDRAM_ERROR_DATA_HIGH				0x4801 */
+ /*#define SDRAM_AND_DEVICE_ERROR_ADDRESS		0x4901 */
+ /*#define SDRAM_RECEIVED_ECC				       0x4881 */
+ /*#define SDRAM_CALCULATED_ECC					0x48c1 */
+ /*#define SDRAM_ECC_CONTROL					0x4941 */
+ /*#define SDRAM_ECC_ERROR_COUNTER			0x4981 */
+
+/******************************************/
+/*  Controlled Delay Line (CDL) Registers */
+/******************************************/
+#define DFCDL_CONFIG0						0x1480
+#define DFCDL_CONFIG1						0x1484
+#define DLL_WRITE						0x1488
+#define DLL_READ						0x148c
+#define SRAM_ADDR						0x1490
+#define SRAM_DATA0						0x1494
+#define SRAM_DATA1						0x1498
+#define SRAM_DATA2						0x149c
+#define DFCL_PROBE						0x14a0
+
+
+/****************************************/
+/* SDRAM Parameters only in MV64260			*/
+/****************************************/
+
+ /*#define SDRAM_BANK0PARAMETERS				0x44C	eliminated in MV64360 and MV64460 */
+ /*#define SDRAM_BANK1PARAMETERS				0x450	eliminated in MV64360 and MV64460 */
+ /*#define SDRAM_BANK2PARAMETERS				0x454	eliminated in MV64360 and MV64460 */
+ /*#define SDRAM_BANK3PARAMETERS				0x458	eliminated in MV64360 and MV64460 */
+
+/******************************************/
+/*   Debug Registers			  */
+/******************************************/
+
+#define DUNIT_DEBUG_LOW						0x1460
+#define DUNIT_DEBUG_HIGH					0x1464
+#define DUNIT_MMASK						0x1b40
+
+/****************************************/
+/* SDunit Debug (for internal use)	*/
+/****************************************/
+
+#define X0_ADDRESS					    0x500
+#define X0_COMMAND_AND_ID				    0x504
+#define X0_WRITE_DATA_LOW				    0x508
+#define X0_WRITE_DATA_HIGH				    0x50c
+#define X0_WRITE_BYTE_ENABLE				    0x518
+#define X0_READ_DATA_LOW				    0x510
+#define X0_READ_DATA_HIGH				    0x514
+#define X0_READ_ID					    0x51c
+#define X1_ADDRESS					    0x520
+#define X1_COMMAND_AND_ID				    0x524
+#define X1_WRITE_DATA_LOW				    0x528
+#define X1_WRITE_DATA_HIGH				    0x52c
+#define X1_WRITE_BYTE_ENABLE				    0x538
+#define X1_READ_DATA_LOW				    0x530
+#define X1_READ_DATA_HIGH				    0x534
+#define X1_READ_ID					    0x53c
+#define X0_SNOOP_ADDRESS				    0x540
+#define X0_SNOOP_COMMAND				    0x544
+#define X1_SNOOP_ADDRESS				    0x548
+#define X1_SNOOP_COMMAND				    0x54c
+
+/****************************************/
+/* Device Parameters					*/
+/****************************************/
+
+#define DEVICE_BANK0PARAMETERS				0x45c
+#define DEVICE_BANK1PARAMETERS				0x460
+#define DEVICE_BANK2PARAMETERS				0x464
+#define DEVICE_BANK3PARAMETERS				0x468
+#define DEVICE_BOOT_BANK_PARAMETERS			0x46c
+#define DEVICE_CONTROL							0x4c0
+#define DEVICE_CROSS_BAR_CONTROL_LOW				0x4c8
+#define DEVICE_CROSS_BAR_CONTROL_HIGH				0x4cc
+#define DEVICE_CROSS_BAR_TIMEOUT				0x4c4
+
+/****************************************/
+/* Device Parameters					*/
+/****************************************/
+
+#define DEVICE_BANK0_PARAMETERS			DEVICE_BANK0PARAMETERS	/* 0x45c1 */
+#define DEVICE_BANK1_PARAMETERS			DEVICE_BANK1PARAMETERS	/* 0x4601 */
+#define DEVICE_BANK2_PARAMETERS			DEVICE_BANK2PARAMETERS	/* 0x4641 */
+#define DEVICE_BANK3_PARAMETERS			DEVICE_BANK3PARAMETERS	/* 0x4681 */
+/*#define DEVICE_BOOT_BANK_PARAMETERS			 0x46c1 */
+#define DEVICE_INTERFACE_CONTROL				DEVICE_CONTROL	/* 0x4c01 */
+#define DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW		DEVICE_CROSS_BAR_CONTROL_LOW  /* 0x4c81 */
+#define DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH		DEVICE_CROSS_BAR_CONTROL_HIGH  /* 0x4cc1 */
+#define DEVICE_INTERFACE_CROSS_BAR_TIMEOUT			DEVICE_CROSS_BAR_TIMEOUT  /* 0x4c41 */
+
+
+/****************************************/
+/* Device Interrupt					*/
+/****************************************/
+
+#define DEVICE_INTERRUPT_CAUSE						0x4d0
+#define DEVICE_INTERRUPT_MASK						0x4d4
+#define DEVICE_ERROR_ADDRESS						0x4d8
+ /*#define DEVICE_INTERRUPT_CAUSE				0x4d01 */
+ /*#define DEVICE_INTERRUPT_MASK				0x4d41 */
+#define DEVICE_ERROR_ADDR				DEVICE_ERROR_ADDRESS  /*0x4d81 */
+#define DEVICE_ERROR_DATA				0x4dc
+#define DEVICE_ERROR_PARITY					0x4e0
+
+/****************************************/
+/* Device debug registers			*/
+/****************************************/
+
+#define DEVICE_DEBUG_LOW					0x4e4
+#define DEVICE_DEBUG_HIGH				0x4e8
+#define RUNIT_MMASK							0x4f0
+
+/****************************************/
+/* DMA Record							*/
+/****************************************/
+
+ /*#define CHANNEL4_DMA_BYTE_COUNT			0x9001 */
+ /*#define CHANNEL5_DMA_BYTE_COUNT			0x9041 */
+ /*#define CHANNEL6_DMA_BYTE_COUNT			0x9081 */
+ /*#define CHANNEL7_DMA_BYTE_COUNT			0x90C1 */
+ /*#define CHANNEL4_DMA_SOURCE_ADDRESS		0x9101 */
+ /*#define CHANNEL5_DMA_SOURCE_ADDRESS		0x9141 */
+ /*#define CHANNEL6_DMA_SOURCE_ADDRESS		0x9181 */
+ /*#define CHANNEL7_DMA_SOURCE_ADDRESS		0x91C1 */
+ /*#define CHANNEL4_DMA_DESTINATION_ADDRESS		0x9201 */
+ /*#define CHANNEL5_DMA_DESTINATION_ADDRESS		0x9241 */
+ /*#define CHANNEL6_DMA_DESTINATION_ADDRESS		0x9281 */
+ /*#define CHANNEL7_DMA_DESTINATION_ADDRESS		0x92C1 */
+ /*#define CHANNEL4NEXT_RECORD_POINTER			0x9301 */
+ /*#define CHANNEL5NEXT_RECORD_POINTER			0x9341 */
+ /*#define CHANNEL6NEXT_RECORD_POINTER			0x9381 */
+ /*#define CHANNEL7NEXT_RECORD_POINTER			0x93C1 */
+ /*#define CHANNEL4CURRENT_DESCRIPTOR_POINTER		0x9701 */
+ /*#define CHANNEL5CURRENT_DESCRIPTOR_POINTER		0x9741 */
+ /*#define CHANNEL6CURRENT_DESCRIPTOR_POINTER		0x9781 */
+ /*#define CHANNEL7CURRENT_DESCRIPTOR_POINTER		0x97C1 */
+ /*#define CHANNEL0_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x8901 */
+ /*#define CHANNEL1_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x8941 */
+ /*#define CHANNEL2_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x8981 */
+ /*#define CHANNEL3_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x89c1 */
+ /*#define CHANNEL4_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x9901 */
+ /*#define CHANNEL5_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x9941 */
+ /*#define CHANNEL6_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x9981 */
+ /*#define CHANNEL7_DMA_SOURCE_HIGH_PCI_ADDRESS		       0x99c1 */
+ /*#define CHANNEL0_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8a01 */
+ /*#define CHANNEL1_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8a41 */
+ /*#define CHANNEL2_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8a81 */
+ /*#define CHANNEL3_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x8ac1 */
+ /*#define CHANNEL4_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9a01 */
+ /*#define CHANNEL5_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9a41 */
+ /*#define CHANNEL6_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9a81 */
+ /*#define CHANNEL7_DMA_DESTINATION_HIGH_PCI_ADDRESS	       0x9ac1 */
+ /*#define CHANNEL0_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8b01 */
+ /*#define CHANNEL1_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8b41 */
+ /*#define CHANNEL2_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8b81 */
+ /*#define CHANNEL3_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x8bc1 */
+ /*#define CHANNEL4_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9b01 */
+ /*#define CHANNEL5_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9b41 */
+ /*#define CHANNEL6_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9b81 */
+ /*#define CHANNEL7_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS   0x9bc1 */
+
+/****************************************/
+/* DMA Channel Control					*/
+/****************************************/
+
+#define CHANNEL0CONTROL					0x840
+#define CHANNEL0CONTROL_HIGH				0x880
+#define CHANNEL1CONTROL					0x844
+#define CHANNEL1CONTROL_HIGH				0x884
+#define CHANNEL2CONTROL					0x848
+#define CHANNEL2CONTROL_HIGH				0x888
+#define CHANNEL3CONTROL					0x84C
+#define CHANNEL3CONTROL_HIGH				0x88C
+
+#define DMA_CHANNEL0_CONTROL				CHANNEL0CONTROL	 /*0x8401 */
+#define DMA_CHANNEL0_CONTROL_HIGH			CHANNEL0CONTROL_HIGH  /*0x8801 */
+#define DMA_CHANNEL1_CONTROL				CHANNEL1CONTROL	 /* 0x8441 */
+#define DMA_CHANNEL1_CONTROL_HIGH			CHANNEL1CONTROL_HIGH  /*0x8841 */
+#define DMA_CHANNEL2_CONTROL				CHANNEL2CONTROL	 /*0x8481 */
+#define DMA_CHANNEL2_CONTROL_HIGH			CHANNEL2CONTROL_HIGH  /*0x8881 */
+#define DMA_CHANNEL3_CONTROL				CHANNEL3CONTROL	 /*0x84C1 */
+#define DMA_CHANNEL3_CONTROL_HIGH			CHANNEL3CONTROL_HIGH  /*0x88C1 */
+
+ /*#define CHANNEL4CONTROL				0x9401 */
+ /*#define CHANNEL4CONTROL_HIGH				0x9801 */
+ /*#define CHANNEL5CONTROL				0x9441 */
+ /*#define CHANNEL5CONTROL_HIGH				0x9841 */
+ /*#define CHANNEL6CONTROL				0x9481 */
+ /*#define CHANNEL6CONTROL_HIGH				0x9881 */
+ /*#define CHANNEL7CONTROL				0x94C1 */
+ /*#define CHANNEL7CONTROL_HIGH				0x98C1 */
+
+
+/****************************************/
+/* DMA Arbiter							*/
+/****************************************/
+
+ /*#define ARBITER_CONTROL_0_3				0x8601 */
+#define ARBITER_CONTROL_4_7				0x960
+/****************************************/
+/*	     IDMA Registers		*/
+/****************************************/
+
+#define DMA_CHANNEL0_BYTE_COUNT					CHANNEL0_DMA_BYTE_COUNT	 /*0x8001 */
+#define DMA_CHANNEL1_BYTE_COUNT					CHANNEL1_DMA_BYTE_COUNT	 /*0x8041 */
+#define DMA_CHANNEL2_BYTE_COUNT					CHANNEL2_DMA_BYTE_COUNT	 /*0x8081 */
+#define DMA_CHANNEL3_BYTE_COUNT					CHANNEL3_DMA_BYTE_COUNT	 /*0x80C1 */
+#define DMA_CHANNEL0_SOURCE_ADDR				CHANNEL0_DMA_SOURCE_ADDRESS  /*0x8101 */
+#define DMA_CHANNEL1_SOURCE_ADDR				CHANNEL1_DMA_SOURCE_ADDRESS  /*0x8141 */
+#define DMA_CHANNEL2_SOURCE_ADDR				CHANNEL2_DMA_SOURCE_ADDRESS  /*0x8181 */
+#define DMA_CHANNEL3_SOURCE_ADDR				CHANNEL3_DMA_SOURCE_ADDRESS  /*0x81c1 */
+#define DMA_CHANNEL0_DESTINATION_ADDR				CHANNEL0_DMA_DESTINATION_ADDRESS  /*0x8201 */
+#define DMA_CHANNEL1_DESTINATION_ADDR				CHANNEL1_DMA_DESTINATION_ADDRESS  /*0x8241 */
+#define DMA_CHANNEL2_DESTINATION_ADDR				CHANNEL2_DMA_DESTINATION_ADDRESS  /*0x8281 */
+#define DMA_CHANNEL3_DESTINATION_ADDR				CHANNEL3_DMA_DESTINATION_ADDRESS  /*0x82C1 */
+#define DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER		CHANNEL0NEXT_RECORD_POINTER  /*0x8301 */
+#define DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER		CHANNEL1NEXT_RECORD_POINTER  /*0x8341 */
+#define DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER		CHANNEL2NEXT_RECORD_POINTER  /*0x8381 */
+#define DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER		CHANNEL3NEXT_RECORD_POINTER  /*0x83C1 */
+#define DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER		CHANNEL0CURRENT_DESCRIPTOR_POINTER  /*0x8701 */
+#define DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER		CHANNEL1CURRENT_DESCRIPTOR_POINTER  /*0x8741 */
+#define DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER		CHANNEL2CURRENT_DESCRIPTOR_POINTER  /*0x8781 */
+#define DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER		CHANNEL3CURRENT_DESCRIPTOR_POINTER  /*0x87C1 */
+
+#define CHANNEL3CURRENT_DESCRIPTOR_POINTER		0x87C
+#define CHANNEL2CURRENT_DESCRIPTOR_POINTER		0x878
+#define CHANNEL1CURRENT_DESCRIPTOR_POINTER		0x874
+#define CHANNEL0CURRENT_DESCRIPTOR_POINTER		0x870
+#define CHANNEL0NEXT_RECORD_POINTER			0x830
+#define CHANNEL1NEXT_RECORD_POINTER			0x834
+#define CHANNEL2NEXT_RECORD_POINTER			0x838
+#define CHANNEL3NEXT_RECORD_POINTER			0x83C
+#define CHANNEL0_DMA_DESTINATION_ADDRESS		0x820
+#define CHANNEL1_DMA_DESTINATION_ADDRESS		0x824
+#define CHANNEL2_DMA_DESTINATION_ADDRESS		0x828
+#define CHANNEL3_DMA_DESTINATION_ADDRESS		0x82C
+#define CHANNEL0_DMA_SOURCE_ADDRESS			0x810
+#define CHANNEL1_DMA_SOURCE_ADDRESS			0x814
+#define CHANNEL2_DMA_SOURCE_ADDRESS			0x818
+#define CHANNEL3_DMA_SOURCE_ADDRESS			0x81C
+#define CHANNEL0_DMA_BYTE_COUNT			0x800
+#define CHANNEL1_DMA_BYTE_COUNT			0x804
+#define CHANNEL2_DMA_BYTE_COUNT			0x808
+#define CHANNEL3_DMA_BYTE_COUNT			0x80C
+
+ /*  IDMA Address Decoding Base Address Registers  */
+
+#define DMA_BASE_ADDR_REG0						0xa00
+#define DMA_BASE_ADDR_REG1						0xa08
+#define DMA_BASE_ADDR_REG2						0xa10
+#define DMA_BASE_ADDR_REG3						0xa18
+#define DMA_BASE_ADDR_REG4						0xa20
+#define DMA_BASE_ADDR_REG5						0xa28
+#define DMA_BASE_ADDR_REG6						0xa30
+#define DMA_BASE_ADDR_REG7						0xa38
+
+ /*  IDMA Address Decoding Size Address Register   */
+
+#define DMA_SIZE_REG0							0xa04
+#define DMA_SIZE_REG1							0xa0c
+#define DMA_SIZE_REG2							0xa14
+#define DMA_SIZE_REG3							0xa1c
+#define DMA_SIZE_REG4							0xa24
+#define DMA_SIZE_REG5							0xa2c
+#define DMA_SIZE_REG6							0xa34
+#define DMA_SIZE_REG7							0xa3C
+
+    /* IDMA Address Decoding High Address Remap and Access
+		  Protection Registers			  */
+
+#define DMA_HIGH_ADDR_REMAP_REG0				0xa60
+#define DMA_HIGH_ADDR_REMAP_REG1				0xa64
+#define DMA_HIGH_ADDR_REMAP_REG2				0xa68
+#define DMA_HIGH_ADDR_REMAP_REG3				0xa6C
+#define DMA_BASE_ADDR_ENABLE_REG				0xa80
+#define DMA_CHANNEL0_ACCESS_PROTECTION_REG		0xa70
+#define DMA_CHANNEL1_ACCESS_PROTECTION_REG		   0xa74
+#define DMA_CHANNEL2_ACCESS_PROTECTION_REG		   0xa78
+#define DMA_CHANNEL3_ACCESS_PROTECTION_REG		   0xa7c
+#define DMA_ARBITER_CONTROL						0x860
+#define DMA_CROSS_BAR_TIMEOUT					0x8d0
+
+ /*  IDMA Headers Retarget Registers   */
+
+ /*#define CPU_IDMA_HEADERS_RETARGET_CONTROL			0x3e01 */
+ /*#define CPU_IDMA_HEADERS_RETARGET_BASE			 0x3e81 */
+
+#define DMA_HEADERS_RETARGET_CONTROL			0xa84
+#define DMA_HEADERS_RETARGET_BASE			0xa88
+
+/****************************************/
+/* DMA Interrupt						*/
+/****************************************/
+
+#define CHANELS0_3_INTERRUPT_CAUSE			0x8c0
+#define CHANELS0_3_INTERRUPT_MASK			0x8c4
+#define CHANELS0_3_ERROR_ADDRESS			0x8c8
+#define CHANELS0_3_ERROR_SELECT				0x8cc
+ /*#define CHANELS4_7_INTERRUPT_CAUSE			0x9c01 */
+ /*#define CHANELS4_7_INTERRUPT_MASK			0x9c41 */
+ /*#define CHANELS4_7_ERROR_ADDRESS			0x9c81 */
+ /*#define CHANELS4_7_ERROR_SELECT			0x9cc1 */
+
+#define DMA_INTERRUPT_CAUSE_REG				CHANELS0_3_INTERRUPT_CAUSE  /*0x8c01 */
+#define DMA_INTERRUPT_CAUSE_MASK			CHANELS0_3_INTERRUPT_MASK  /*0x8c41 */
+#define DMA_ERROR_ADDR						CHANELS0_3_ERROR_ADDRESS  /*0x8c81 */
+#define DMA_ERROR_SELECT					CHANELS0_3_ERROR_SELECT	 /*0x8cc1 */
+
+
+/****************************************/
+/* DMA Debug (for internal use)		*/
+/****************************************/
+
+#define DMA_X0_ADDRESS						0x8e0
+#define DMA_X0_COMMAND_AND_ID				0x8e4
+ /*#define DMA_X0_WRITE_DATA_LOW				0x8e81 */
+ /*#define DMA_X0_WRITE_DATA_HIGH				0x8ec1 */
+ /*#define DMA_X0_WRITE_BYTE_ENABLE				0x8f81 */
+ /*#define DMA_X0_READ_DATA_LOW					0x8f01 */
+ /*#define DMA_X0_READ_DATA_HIGH				0x8f41 */
+ /*#define DMA_X0_READ_ID					0x8fc1 */
+ /*#define DMA_X1_ADDRESS					0x9e01 */
+ /*#define DMA_X1_COMMAND_AND_ID			0x9e41 */
+ /*#define DMA_X1_WRITE_DATA_LOW				0x9e81 */
+ /*#define DMA_X1_WRITE_DATA_HIGH				0x9ec1 */
+ /*#define DMA_X1_WRITE_BYTE_ENABLE				0x9f81 */
+ /*#define DMA_X1_READ_DATA_LOW					0x9f01 */
+ /*#define DMA_X1_READ_DATA_HIGH				0x9f41 */
+ /*#define DMA_X1_READ_ID					0x9fc1 */
+
+ /*  IDMA Debug Register ( for internal use )	 */
+
+#define DMA_DEBUG_LOW						DMA_X0_ADDRESS	/* 0x8e01 */
+#define DMA_DEBUG_HIGH						DMA_X0_COMMAND_AND_ID  /*0x8e41 */
+#define DMA_SPARE						0xA8C
+
+
+/****************************************/
+/* Timer_Counter						*/
+/****************************************/
+
+#define TIMER_COUNTER0					0x850
+#define TIMER_COUNTER1					0x854
+#define TIMER_COUNTER2					0x858
+#define TIMER_COUNTER3					0x85C
+#define TIMER_COUNTER_0_3_CONTROL			0x864
+#define TIMER_COUNTER_0_3_INTERRUPT_CAUSE		0x868
+#define TIMER_COUNTER_0_3_INTERRUPT_MASK		0x86c
+ /*#define TIMER_COUNTER4					0x9501 */
+ /*#define TIMER_COUNTER5					0x9541 */
+ /*#define TIMER_COUNTER6					0x9581 */
+ /*#define TIMER_COUNTER7					0x95C1 */
+ /*#define TIMER_COUNTER_4_7_CONTROL			0x9641 */
+ /*#define TIMER_COUNTER_4_7_INTERRUPT_CAUSE		0x9681 */
+ /*#define TIMER_COUNTER_4_7_INTERRUPT_MASK			0x96c1 */
+
+/****************************************/
+/* PCI Slave Address Decoding		*/
+/****************************************/
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+#define PCI_0_CS_0_BANK_SIZE					PCI_0SCS_0_BANK_SIZE  /*0xc081 */
+#define PCI_1_CS_0_BANK_SIZE					PCI_1SCS_0_BANK_SIZE  /* 0xc881 */
+#define PCI_0_CS_1_BANK_SIZE					PCI_0SCS_1_BANK_SIZE  /*0xd081 */
+#define PCI_1_CS_1_BANK_SIZE					PCI_1SCS_1_BANK_SIZE  /* 0xd881 */
+#define PCI_0_CS_2_BANK_SIZE					PCI_0SCS_2_BANK_SIZE  /*0xc0c1 */
+#define PCI_1_CS_2_BANK_SIZE					PCI_1SCS_2_BANK_SIZE  /*0xc8c1 */
+#define PCI_0_CS_3_BANK_SIZE					PCI_0SCS_3_BANK_SIZE  /*0xd0c1 */
+#define PCI_1_CS_3_BANK_SIZE					PCI_1SCS_3_BANK_SIZE  /*0xd8c1 */
+#define PCI_0_DEVCS_0_BANK_SIZE					PCI_0CS_0_BANK_SIZE  /*0xc101 */
+#define PCI_1_DEVCS_0_BANK_SIZE				    PCI_1CS_0_BANK_SIZE	 /*0xc901 */
+#define PCI_0_DEVCS_1_BANK_SIZE				    PCI_0CS_1_BANK_SIZE	 /*0xd101 */
+#define PCI_1_DEVCS_1_BANK_SIZE				    PCI_1CS_1_BANK_SIZE	 /* 0xd901 */
+#define PCI_0_DEVCS_2_BANK_SIZE				    PCI_0CS_2_BANK_SIZE	 /* 0xd181 */
+#define PCI_1_DEVCS_2_BANK_SIZE				    PCI_1CS_2_BANK_SIZE	 /*0xd981 */
+#define PCI_0_DEVCS_3_BANK_SIZE				    PCI_0CS_3_BANK_SIZE	 /* 0xc141 */
+#define PCI_1_DEVCS_3_BANK_SIZE				    PCI_1CS_3_BANK_SIZE	 /*0xc941 */
+#define PCI_0_DEVCS_BOOT_BANK_SIZE			PCI_0CS_BOOT_BANK_SIZE	/*0xd141 */
+#define PCI_1_DEVCS_BOOT_BANK_SIZE			PCI_1CS_BOOT_BANK_SIZE	/* 0xd941 */
+#define PCI_0_P2P_MEM0_BAR_SIZE				    PCI_0P2P_MEM0_BAR_SIZE  /*0xd1c1 */
+#define PCI_1_P2P_MEM0_BAR_SIZE				    PCI_1P2P_MEM0_BAR_SIZE  /*0xd9c1 */
+#define PCI_0_P2P_MEM1_BAR_SIZE				    PCI_0P2P_MEM1_BAR_SIZE  /*0xd201 */
+#define PCI_1_P2P_MEM1_BAR_SIZE				    PCI_1P2P_MEM1_BAR_SIZE  /*0xda01 */
+#define PCI_0_P2P_I_O_BAR_SIZE					PCI_0P2P_I_O_BAR_SIZE  /*0xd241 */
+#define PCI_1_P2P_I_O_BAR_SIZE					PCI_1P2P_I_O_BAR_SIZE  /*0xda41 */
+#define PCI_0_CPU_BAR_SIZE					PCI_0CPU_BAR_SIZE  /*0xd281 */
+#define PCI_1_CPU_BAR_SIZE					PCI_1CPU_BAR_SIZE  /*0xda81 */
+#define PCI_0_INTERNAL_SRAM_BAR_SIZE			PCI_0DAC_SCS_0_BANK_SIZE  /*0xe001 */
+#define PCI_1_INTERNAL_SRAM_BAR_SIZE			PCI_1DAC_SCS_0_BANK_SIZE  /*0xe801 */
+#define PCI_0_EXPANSION_ROM_BAR_SIZE			PCI_0EXPANSION_ROM_BAR_SIZE  /*0xd2c1 */
+#define PCI_1_EXPANSION_ROM_BAR_SIZE		       PCI_1EXPANSION_ROM_BAR_SIZE  /*0xd9c1 */
+#define PCI_0_BASE_ADDR_REG_ENABLE			PCI_0BASE_ADDRESS_REGISTERS_ENABLE  /*0xc3c1 */
+#define PCI_1_BASE_ADDR_REG_ENABLE			PCI_1BASE_ADDRESS_REGISTERS_ENABLE  /*0xcbc1 */
+#define PCI_0_CS_0_BASE_ADDR_REMAP		PCI_0SCS_0_BASE_ADDRESS_REMAP  /*0xc481 */
+#define PCI_1_CS_0_BASE_ADDR_REMAP		PCI_1SCS_0_BASE_ADDRESS_REMAP  /*0xcc81 */
+#define PCI_0_CS_1_BASE_ADDR_REMAP		PCI_0SCS_1_BASE_ADDRESS_REMAP  /*0xd481 */
+#define PCI_1_CS_1_BASE_ADDR_REMAP		PCI_1SCS_1_BASE_ADDRESS_REMAP  /*0xdc81 */
+#define PCI_0_CS_2_BASE_ADDR_REMAP		PCI_0SCS_2_BASE_ADDRESS_REMAP  /*0xc4c1 */
+#define PCI_1_CS_2_BASE_ADDR_REMAP		PCI_1SCS_2_BASE_ADDRESS_REMAP  /*0xccc1 */
+#define PCI_0_CS_3_BASE_ADDR_REMAP		PCI_0SCS_3_BASE_ADDRESS_REMAP  /*0xd4c1 */
+#define PCI_1_CS_3_BASE_ADDR_REMAP		PCI_1SCS_3_BASE_ADDRESS_REMAP /* 0xdcc1 */
+#define PCI_0_CS_0_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP
+#define PCI_1_CS_0_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP
+#define PCI_0_CS_1_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP
+#define PCI_1_CS_1_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP
+#define PCI_0_CS_2_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP
+#define PCI_1_CS_2_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP
+#define PCI_0_CS_3_BASE_HIGH_ADDR_REMAP PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP
+#define PCI_1_CS_3_BASE_HIGH_ADDR_REMAP PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP
+#define PCI_0_DEVCS_0_BASE_ADDR_REMAP		PCI_0CS_0_BASE_ADDRESS_REMAP  /*0xc501 */
+#define PCI_1_DEVCS_0_BASE_ADDR_REMAP		PCI_1CS_0_BASE_ADDRESS_REMAP  /*0xcd01 */
+#define PCI_0_DEVCS_1_BASE_ADDR_REMAP		PCI_0CS_1_BASE_ADDRESS_REMAP  /*0xd501 */
+#define PCI_1_DEVCS_1_BASE_ADDR_REMAP		PCI_1CS_1_BASE_ADDRESS_REMAP  /*0xdd01 */
+#define PCI_0_DEVCS_2_BASE_ADDR_REMAP		PCI_0CS_2_BASE_ADDRESS_REMAP  /*0xd581 */
+#define PCI_1_DEVCS_2_BASE_ADDR_REMAP		PCI_1CS_2_BASE_ADDRESS_REMAP  /*0xdd81 */
+#define PCI_0_DEVCS_3_BASE_ADDR_REMAP			PCI_0CS_3_BASE_ADDRESS_REMAP  /*0xc541 */
+#define PCI_1_DEVCS_3_BASE_ADDR_REMAP			PCI_1CS_3_BASE_ADDRESS_REMAP  /*0xcd41 */
+#define PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP    PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP	 /*0xd541 */
+#define PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP    PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP	 /*0xdd41 */
+#define PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW    PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW  /*0xd5c1 */
+#define PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW    PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW  /*0xddc1 */
+#define PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH   PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH  /*0xd601 */
+#define PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH   PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH  /*0xde01 */
+#define PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW	PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW  /*0xd641 */
+#define PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW	PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW  /*0xde41 */
+#define PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH	PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH  /*0xd681 */
+#define PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH	PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH  /*0xde81 */
+#define PCI_0_P2P_I_O_BASE_ADDR_REMAP			PCI_0P2P_I_O_BASE_ADDRESS_REMAP	 /*0xd6c1 */
+#define PCI_1_P2P_I_O_BASE_ADDR_REMAP			PCI_1P2P_I_O_BASE_ADDRESS_REMAP	 /*0xdec 1 */
+#define PCI_0_CPU_BASE_ADDR_REMAP_LOW			PCI_0CPU_BASE_ADDRESS_REMAP  /*0xd701 */
+#define PCI_1_CPU_BASE_ADDR_REMAP_LOW			PCI_1CPU_BASE_ADDRESS_REMAP  /*0xdf01 */
+#define PCI_0_CPU_BASE_ADDR_REMAP_HIGH			0xd74
+#define PCI_1_CPU_BASE_ADDR_REMAP_HIGH			0xdf4
+#define PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP		  PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP  /*0xf001 */
+#define PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP		  0xf80
+#define PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP		   PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP  /*0xf381 */
+#define PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP		   PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP  /*0xfb81 */
+#define PCI_0_ADDR_DECODE_CONTROL				PCI_0ADDRESS_DECODE_CONTROL  /*0xd3c1 */
+#define PCI_1_ADDR_DECODE_CONTROL				PCI_1ADDRESS_DECODE_CONTROL  /*0xdbc1 */
+#define PCI_0_HEADERS_RETARGET_CONTROL			0xF40
+#define PCI_1_HEADERS_RETARGET_CONTROL				0xFc0
+#define PCI_0_HEADERS_RETARGET_BASE				0xF44
+#define PCI_1_HEADERS_RETARGET_BASE				0xFc4
+#define PCI_0_HEADERS_RETARGET_HIGH				0xF48
+#define PCI_1_HEADERS_RETARGET_HIGH				0xFc8
+
+#define PCI_0SCS_0_BANK_SIZE				0xc08
+#define PCI_1SCS_0_BANK_SIZE				0xc88
+#define PCI_0SCS_1_BANK_SIZE				0xd08
+#define PCI_1SCS_1_BANK_SIZE				0xd88
+#define PCI_0SCS_2_BANK_SIZE				0xc0c
+#define PCI_1SCS_2_BANK_SIZE				0xc8c
+#define PCI_0SCS_3_BANK_SIZE				0xd0c
+#define PCI_1SCS_3_BANK_SIZE				0xd8c
+#define PCI_0CS_0_BANK_SIZE				0xc10
+#define PCI_1CS_0_BANK_SIZE				0xc90
+#define PCI_0CS_1_BANK_SIZE				0xd10
+#define PCI_1CS_1_BANK_SIZE				0xd90
+#define PCI_0CS_2_BANK_SIZE				0xd18
+#define PCI_1CS_2_BANK_SIZE				0xd98
+#define PCI_0CS_3_BANK_SIZE				0xc14
+#define PCI_1CS_3_BANK_SIZE				0xc94
+#define PCI_0CS_BOOT_BANK_SIZE				0xd14
+#define PCI_1CS_BOOT_BANK_SIZE				0xd94
+#define PCI_0P2P_MEM0_BAR_SIZE						0xd1c
+#define PCI_1P2P_MEM0_BAR_SIZE						0xd9c
+#define PCI_0P2P_MEM1_BAR_SIZE						0xd20
+#define PCI_1P2P_MEM1_BAR_SIZE						0xda0
+#define PCI_0P2P_I_O_BAR_SIZE						0xd24
+#define PCI_1P2P_I_O_BAR_SIZE						0xda4
+#define PCI_0CPU_BAR_SIZE						0xd28
+#define PCI_1CPU_BAR_SIZE						0xda8
+#define PCI_0DAC_SCS_0_BANK_SIZE				0xe00
+#define PCI_1DAC_SCS_0_BANK_SIZE				0xe80
+#define PCI_0DAC_SCS_1_BANK_SIZE				0xe04
+#define PCI_1DAC_SCS_1_BANK_SIZE				0xe84
+#define PCI_0DAC_SCS_2_BANK_SIZE				0xe08
+#define PCI_1DAC_SCS_2_BANK_SIZE				0xe88
+#define PCI_0DAC_SCS_3_BANK_SIZE				0xe0c
+#define PCI_1DAC_SCS_3_BANK_SIZE				0xe8c
+#define PCI_0DAC_CS_0_BANK_SIZE					0xe10
+#define PCI_1DAC_CS_0_BANK_SIZE					0xe90
+#define PCI_0DAC_CS_1_BANK_SIZE					0xe14
+#define PCI_1DAC_CS_1_BANK_SIZE					0xe94
+#define PCI_0DAC_CS_2_BANK_SIZE					0xe18
+#define PCI_1DAC_CS_2_BANK_SIZE					0xe98
+#define PCI_0DAC_CS_3_BANK_SIZE					0xe1c
+#define PCI_1DAC_CS_3_BANK_SIZE					0xe9c
+#define PCI_0DAC_BOOTCS_BANK_SIZE				0xe20
+#define PCI_1DAC_BOOTCS_BANK_SIZE				0xea0
+
+#define PCI_0DAC_P2P_MEM0_BAR_SIZE				0xe24
+#define PCI_1DAC_P2P_MEM0_BAR_SIZE				0xea4
+#define PCI_0DAC_P2P_MEM1_BAR_SIZE				0xe28
+#define PCI_1DAC_P2P_MEM1_BAR_SIZE				0xea8
+#define PCI_0DAC_CPU_BAR_SIZE						0xe2c
+#define PCI_1DAC_CPU_BAR_SIZE						0xeac
+#define PCI_0EXPANSION_ROM_BAR_SIZE				0xd2c
+#define PCI_1EXPANSION_ROM_BAR_SIZE				0xdac
+#define PCI_0BASE_ADDRESS_REGISTERS_ENABLE		0xc3c
+#define PCI_1BASE_ADDRESS_REGISTERS_ENABLE		0xcbc
+#define PCI_0SCS_0_BASE_ADDRESS_REMAP			0xc48
+#define PCI_1SCS_0_BASE_ADDRESS_REMAP			0xcc8
+#define PCI_0SCS_1_BASE_ADDRESS_REMAP			0xd48
+#define PCI_1SCS_1_BASE_ADDRESS_REMAP			0xdc8
+#define PCI_0SCS_2_BASE_ADDRESS_REMAP			0xc4c
+#define PCI_1SCS_2_BASE_ADDRESS_REMAP			0xccc
+#define PCI_0SCS_3_BASE_ADDRESS_REMAP			0xd4c
+#define PCI_1SCS_3_BASE_ADDRESS_REMAP			0xdcc
+#define PCI_0CS_0_BASE_ADDRESS_REMAP			0xc50
+#define PCI_1CS_0_BASE_ADDRESS_REMAP			0xcd0
+#define PCI_0CS_1_BASE_ADDRESS_REMAP			0xd50
+#define PCI_1CS_1_BASE_ADDRESS_REMAP			0xdd0
+#define PCI_0CS_2_BASE_ADDRESS_REMAP			0xd58
+#define PCI_1CS_2_BASE_ADDRESS_REMAP			0xdd8
+#define PCI_0CS_3_BASE_ADDRESS_REMAP			0xc54
+#define PCI_1CS_3_BASE_ADDRESS_REMAP			0xcd4
+#define PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP	0xd54
+#define PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP	0xdd4
+#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW			0xd5c
+#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW		  0xddc
+#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH		  0xd60
+#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH		  0xde0
+#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW		 0xd64
+#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW		 0xde4
+#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH		 0xd68
+#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH		 0xde8
+#define PCI_0P2P_I_O_BASE_ADDRESS_REMAP				0xd6c
+#define PCI_1P2P_I_O_BASE_ADDRESS_REMAP				0xdec
+#define PCI_0CPU_BASE_ADDRESS_REMAP				0xd70
+#define PCI_1CPU_BASE_ADDRESS_REMAP				0xdf0
+#define PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP			0xf00
+#define PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP			0xff0
+#define PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP			0xf04
+#define PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP			0xf84
+#define PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP			0xf08
+#define PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP			0xf88
+#define PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP			0xf0c
+#define PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP			0xf8c
+#define PCI_0DAC_CS_0_BASE_ADDRESS_REMAP			0xf10
+#define PCI_1DAC_CS_0_BASE_ADDRESS_REMAP			0xf90
+#define PCI_0DAC_CS_1_BASE_ADDRESS_REMAP			0xf14
+#define PCI_1DAC_CS_1_BASE_ADDRESS_REMAP			0xf94
+#define PCI_0DAC_CS_2_BASE_ADDRESS_REMAP			0xf18
+#define PCI_1DAC_CS_2_BASE_ADDRESS_REMAP			0xf98
+#define PCI_0DAC_CS_3_BASE_ADDRESS_REMAP			0xf1c
+#define PCI_1DAC_CS_3_BASE_ADDRESS_REMAP			0xf9c
+#define PCI_0DAC_BOOTCS_BASE_ADDRESS_REMAP			0xf20
+#define PCI_1DAC_BOOTCS_BASE_ADDRESS_REMAP		    0xfa0
+#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW     0xf24
+#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW     0xfa4
+#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH    0xf28
+#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH    0xfa8
+#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW	0xf2c
+#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW     0xfac
+#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH    0xf30
+#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH    0xfb0
+#define PCI_0DAC_CPU_BASE_ADDRESS_REMAP				0xf34
+#define PCI_1DAC_CPU_BASE_ADDRESS_REMAP				0xfb4
+#define PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP			0xf38
+#define PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP			0xfb8
+#define PCI_0ADDRESS_DECODE_CONTROL				0xd3c
+#define PCI_1ADDRESS_DECODE_CONTROL				0xdbc
+
+/****************************************/
+/* PCI Control				*/
+/****************************************/
+
+#define PCI_0COMMAND										0xc00
+#define PCI_1COMMAND										0xc80
+#define PCI_0MODE					    0xd00
+#define PCI_1MODE					    0xd80
+#define PCI_0TIMEOUT_RETRY									0xc04
+#define PCI_1TIMEOUT_RETRY									0xc84
+#define PCI_0READ_BUFFER_DISCARD_TIMER			    0xd04
+#define PCI_1READ_BUFFER_DISCARD_TIMER			    0xd84
+#define MSI_0TRIGGER_TIMER				    0xc38
+#define MSI_1TRIGGER_TIMER				    0xcb8
+#define PCI_0ARBITER_CONTROL				    0x1d00
+#define PCI_1ARBITER_CONTROL				    0x1d80
+/* changing untill here */
+#define PCI_0CROSS_BAR_CONTROL_LOW			     0x1d08
+#define PCI_0CROSS_BAR_CONTROL_HIGH			     0x1d0c
+#define PCI_0CROSS_BAR_TIMEOUT				     0x1d04
+#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_LOW	     0x1d18
+#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_HIGH	     0x1d1c
+#define PCI_0SYNC_BARRIER_VIRTUAL_REGISTER		     0x1d10
+#define PCI_0P2P_CONFIGURATION				     0x1d14
+#define PCI_0ACCESS_CONTROL_BASE_0_LOW			     0x1e00
+#define PCI_0ACCESS_CONTROL_BASE_0_HIGH			     0x1e04
+#define PCI_0ACCESS_CONTROL_TOP_0			     0x1e08
+#define PCI_0ACCESS_CONTROL_BASE_1_LOW			     0x1e10
+#define PCI_0ACCESS_CONTROL_BASE_1_HIGH			     0x1e14
+#define PCI_0ACCESS_CONTROL_TOP_1			     0x1e18
+#define PCI_0ACCESS_CONTROL_BASE_2_LOW			     0x1e20
+#define PCI_0ACCESS_CONTROL_BASE_2_HIGH			     0x1e24
+#define PCI_0ACCESS_CONTROL_TOP_2			     0x1e28
+#define PCI_0ACCESS_CONTROL_BASE_3_LOW			     0x1e30
+#define PCI_0ACCESS_CONTROL_BASE_3_HIGH			     0x1e34
+#define PCI_0ACCESS_CONTROL_TOP_3			     0x1e38
+#define PCI_0ACCESS_CONTROL_BASE_4_LOW			     0x1e40
+#define PCI_0ACCESS_CONTROL_BASE_4_HIGH			     0x1e44
+#define PCI_0ACCESS_CONTROL_TOP_4			     0x1e48
+#define PCI_0ACCESS_CONTROL_BASE_5_LOW			     0x1e50
+#define PCI_0ACCESS_CONTROL_BASE_5_HIGH			     0x1e54
+#define PCI_0ACCESS_CONTROL_TOP_5			     0x1e58
+#define PCI_0ACCESS_CONTROL_BASE_6_LOW			     0x1e60
+#define PCI_0ACCESS_CONTROL_BASE_6_HIGH			     0x1e64
+#define PCI_0ACCESS_CONTROL_TOP_6			     0x1e68
+#define PCI_0ACCESS_CONTROL_BASE_7_LOW			     0x1e70
+#define PCI_0ACCESS_CONTROL_BASE_7_HIGH			     0x1e74
+#define PCI_0ACCESS_CONTROL_TOP_7			     0x1e78
+#define PCI_1CROSS_BAR_CONTROL_LOW			     0x1d88
+#define PCI_1CROSS_BAR_CONTROL_HIGH			     0x1d8c
+#define PCI_1CROSS_BAR_TIMEOUT				     0x1d84
+#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_LOW	     0x1d98
+#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_HIGH	     0x1d9c
+#define PCI_1SYNC_BARRIER_VIRTUAL_REGISTER		     0x1d90
+#define PCI_1P2P_CONFIGURATION				     0x1d94
+#define PCI_1ACCESS_CONTROL_BASE_0_LOW			     0x1e80
+#define PCI_1ACCESS_CONTROL_BASE_0_HIGH			     0x1e84
+#define PCI_1ACCESS_CONTROL_TOP_0			     0x1e88
+#define PCI_1ACCESS_CONTROL_BASE_1_LOW			     0x1e90
+#define PCI_1ACCESS_CONTROL_BASE_1_HIGH			     0x1e94
+#define PCI_1ACCESS_CONTROL_TOP_1			     0x1e98
+#define PCI_1ACCESS_CONTROL_BASE_2_LOW			     0x1ea0
+#define PCI_1ACCESS_CONTROL_BASE_2_HIGH			     0x1ea4
+#define PCI_1ACCESS_CONTROL_TOP_2			     0x1ea8
+#define PCI_1ACCESS_CONTROL_BASE_3_LOW			     0x1eb0
+#define PCI_1ACCESS_CONTROL_BASE_3_HIGH			     0x1eb4
+#define PCI_1ACCESS_CONTROL_TOP_3			     0x1eb8
+#define PCI_1ACCESS_CONTROL_BASE_4_LOW			     0x1ec0
+#define PCI_1ACCESS_CONTROL_BASE_4_HIGH			     0x1ec4
+#define PCI_1ACCESS_CONTROL_TOP_4			     0x1ec8
+#define PCI_1ACCESS_CONTROL_BASE_5_LOW			     0x1ed0
+#define PCI_1ACCESS_CONTROL_BASE_5_HIGH			     0x1ed4
+#define PCI_1ACCESS_CONTROL_TOP_5			     0x1ed8
+#define PCI_1ACCESS_CONTROL_BASE_6_LOW			     0x1ee0
+#define PCI_1ACCESS_CONTROL_BASE_6_HIGH			     0x1ee4
+#define PCI_1ACCESS_CONTROL_TOP_6			     0x1ee8
+#define PCI_1ACCESS_CONTROL_BASE_7_LOW			     0x1ef0
+#define PCI_1ACCESS_CONTROL_BASE_7_HIGH			     0x1ef4
+#define PCI_1ACCESS_CONTROL_TOP_7			     0x1ef8
+
+/****************************************/
+/* PCI Snoop Control			*/
+/****************************************/
+
+#define PCI_0SNOOP_CONTROL_BASE_0_LOW			     0x1f00
+#define PCI_0SNOOP_CONTROL_BASE_0_HIGH			     0x1f04
+#define PCI_0SNOOP_CONTROL_TOP_0			     0x1f08
+#define PCI_0SNOOP_CONTROL_BASE_1_0_LOW			     0x1f10
+#define PCI_0SNOOP_CONTROL_BASE_1_0_HIGH		     0x1f14
+#define PCI_0SNOOP_CONTROL_TOP_1			     0x1f18
+#define PCI_0SNOOP_CONTROL_BASE_2_0_LOW			     0x1f20
+#define PCI_0SNOOP_CONTROL_BASE_2_0_HIGH		     0x1f24
+#define PCI_0SNOOP_CONTROL_TOP_2			     0x1f28
+#define PCI_0SNOOP_CONTROL_BASE_3_0_LOW			     0x1f30
+#define PCI_0SNOOP_CONTROL_BASE_3_0_HIGH		     0x1f34
+#define PCI_0SNOOP_CONTROL_TOP_3			     0x1f38
+#define PCI_1SNOOP_CONTROL_BASE_0_LOW			     0x1f80
+#define PCI_1SNOOP_CONTROL_BASE_0_HIGH			     0x1f84
+#define PCI_1SNOOP_CONTROL_TOP_0			     0x1f88
+#define PCI_1SNOOP_CONTROL_BASE_1_0_LOW			     0x1f90
+#define PCI_1SNOOP_CONTROL_BASE_1_0_HIGH		     0x1f94
+#define PCI_1SNOOP_CONTROL_TOP_1			     0x1f98
+#define PCI_1SNOOP_CONTROL_BASE_2_0_LOW			     0x1fa0
+#define PCI_1SNOOP_CONTROL_BASE_2_0_HIGH		     0x1fa4
+#define PCI_1SNOOP_CONTROL_TOP_2			     0x1fa8
+#define PCI_1SNOOP_CONTROL_BASE_3_0_LOW			     0x1fb0
+#define PCI_1SNOOP_CONTROL_BASE_3_0_HIGH		     0x1fb4
+#define PCI_1SNOOP_CONTROL_TOP_3			     0x1fb8
+
+/****************************************/
+/* PCI Configuration Address		*/
+/****************************************/
+
+#define PCI_0CONFIGURATION_ADDRESS							0xcf8
+#define PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER		0xcfc
+#define PCI_1CONFIGURATION_ADDRESS							0xc78
+#define PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER		0xc7c
+#define PCI_0INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER			0xc34
+#define PCI_1INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER			0xcb4
+
+/****************************************/
+/* PCI Error Report			*/
+/****************************************/
+
+#define PCI_0SERR_MASK										 0xc28
+#define PCI_0ERROR_ADDRESS_LOW				     0x1d40
+#define PCI_0ERROR_ADDRESS_HIGH				     0x1d44
+#define PCI_0ERROR_DATA_LOW				     0x1d48
+#define PCI_0ERROR_DATA_HIGH				     0x1d4c
+#define PCI_0ERROR_COMMAND				     0x1d50
+#define PCI_0ERROR_CAUSE				     0x1d58
+#define PCI_0ERROR_MASK					     0x1d5c
+#define PCI_1SERR_MASK										 0xca8
+#define PCI_1ERROR_ADDRESS_LOW				     0x1dc0
+#define PCI_1ERROR_ADDRESS_HIGH				     0x1dc4
+#define PCI_1ERROR_DATA_LOW				     0x1dc8
+#define PCI_1ERROR_DATA_HIGH				     0x1dcc
+#define PCI_1ERROR_COMMAND				     0x1dd0
+#define PCI_1ERROR_CAUSE				     0x1dd8
+#define PCI_1ERROR_MASK					     0x1ddc
+
+
+/****************************************/
+/* Lslave Debug	 (for internal use)	*/
+/****************************************/
+
+#define L_SLAVE_X0_ADDRESS				    0x1d20
+#define L_SLAVE_X0_COMMAND_AND_ID			    0x1d24
+#define L_SLAVE_X1_ADDRESS				    0x1d28
+#define L_SLAVE_X1_COMMAND_AND_ID			    0x1d2c
+#define L_SLAVE_WRITE_DATA_LOW				    0x1d30
+#define L_SLAVE_WRITE_DATA_HIGH				    0x1d34
+#define L_SLAVE_WRITE_BYTE_ENABLE			    0x1d60
+#define L_SLAVE_READ_DATA_LOW				    0x1d38
+#define L_SLAVE_READ_DATA_HIGH				    0x1d3c
+#define L_SLAVE_READ_ID					    0x1d64
+
+/****************************************/
+/* PCI Configuration Function 0		*/
+/****************************************/
+
+#define PCI_DEVICE_AND_VENDOR_ID							0x000
+#define PCI_STATUS_AND_COMMAND								0x004
+#define PCI_CLASS_CODE_AND_REVISION_ID					0x008
+#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE		0x00C
+#define PCI_SCS_0_BASE_ADDRESS							0x010
+#define PCI_SCS_1_BASE_ADDRESS							    0x014
+#define PCI_SCS_2_BASE_ADDRESS							    0x018
+#define PCI_SCS_3_BASE_ADDRESS							0x01C
+#define PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS	0x020
+#define PCI_INTERNAL_REGISTERS_I_OMAPPED_BASE_ADDRESS		0x024
+#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID			0x02C
+#define PCI_EXPANSION_ROM_BASE_ADDRESS_REGISTER				0x030
+#define PCI_CAPABILTY_LIST_POINTER			    0x034
+#define PCI_INTERRUPT_PIN_AND_LINE						    0x03C
+#define PCI_POWER_MANAGEMENT_CAPABILITY			    0x040
+#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL		    0x044
+#define PCI_VPD_ADDRESS					    0x048
+#define PCI_VPD_DATA					    0x04c
+#define PCI_MSI_MESSAGE_CONTROL				    0x050
+#define PCI_MSI_MESSAGE_ADDRESS				    0x054
+#define PCI_MSI_MESSAGE_UPPER_ADDRESS			    0x058
+#define PCI_MSI_MESSAGE_DATA				    0x05c
+#define PCI_COMPACT_PCI_HOT_SWAP_CAPABILITY		    0x058
+
+/****************************************/
+/* PCI Configuration Function 1		*/
+/****************************************/
+
+#define PCI_CS_0_BASE_ADDRESS							0x110
+#define PCI_CS_1_BASE_ADDRESS							    0x114
+#define PCI_CS_2_BASE_ADDRESS							    0x118
+#define PCI_CS_3_BASE_ADDRESS							0x11c
+#define PCI_BOOTCS_BASE_ADDRESS				    0x120
+
+/****************************************/
+/* PCI Configuration Function 2		*/
+/****************************************/
+
+#define PCI_P2P_MEM0_BASE_ADDRESS						0x210
+ /*#define PCI_P2P_MEM1_BASE_ADDRESS							0x2141 */
+#define PCI_P2P_I_O_BASE_ADDRESS							0x218
+ /*#define PCI_CPU_BASE_ADDRESS							    0x21c1 */
+
+/****************************************/
+/* PCI Configuration Function 4		*/
+/****************************************/
+
+#define PCI_DAC_SCS_0_BASE_ADDRESS_LOW						0x410
+#define PCI_DAC_SCS_0_BASE_ADDRESS_HIGH					    0x414
+#define PCI_DAC_SCS_1_BASE_ADDRESS_LOW					    0x418
+#define PCI_DAC_SCS_1_BASE_ADDRESS_HIGH					    0x41c
+#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_LOW		    0x420
+#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_HIGH		    0x424
+
+
+/****************************************/
+/* PCI Configuration Function 5		*/
+/****************************************/
+
+#define PCI_DAC_SCS_2_BASE_ADDRESS_LOW						0x510
+#define PCI_DAC_SCS_2_BASE_ADDRESS_HIGH					    0x514
+#define PCI_DAC_SCS_3_BASE_ADDRESS_LOW					    0x518
+#define PCI_DAC_SCS_3_BASE_ADDRESS_HIGH					    0x51c
+#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_LOW		    0x520
+#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_HIGH		    0x524
+
+
+/****************************************/
+/* PCI Configuration Function 6		*/
+/****************************************/
+
+#define PCI_DAC_CS_0_BASE_ADDRESS_LOW						0x610
+#define PCI_DAC_CS_0_BASE_ADDRESS_HIGH					    0x614
+#define PCI_DAC_CS_1_BASE_ADDRESS_LOW					    0x618
+#define PCI_DAC_CS_1_BASE_ADDRESS_HIGH					    0x61c
+#define PCI_DAC_CS_2_BASE_ADDRESS_LOW				0x620
+#define PCI_DAC_CS_2_BASE_ADDRESS_HIGH				0x624
+
+/****************************************/
+/* PCI Configuration Function 7		*/
+/****************************************/
+
+#define PCI_DAC_CS_3_BASE_ADDRESS_LOW						0x710
+#define PCI_DAC_CS_3_BASE_ADDRESS_HIGH					    0x714
+#define PCI_DAC_BOOTCS_BASE_ADDRESS_LOW					    0x718
+#define PCI_DAC_BOOTCS_BASE_ADDRESS_HIGH				    0x71c
+#define PCI_DAC_CPU_BASE_ADDRESS_LOW				0x720
+#define PCI_DAC_CPU_BASE_ADDRESS_HIGH				0x724
+
+/****************************** MV64360 and MV64460 PCI ***************************/
+/***********************************/
+/*   PCI Control Register Map	   */
+/***********************************/
+
+#define PCI_0_DLL_STATUS_AND_COMMAND				0x1d20
+#define PCI_1_DLL_STATUS_AND_COMMAND				0x1da0
+#define PCI_0_MPP_PADS_DRIVE_CONTROL				0x1d1C
+#define PCI_1_MPP_PADS_DRIVE_CONTROL				0x1d9C
+#define PCI_0_COMMAND					0xc00
+#define PCI_1_COMMAND					0xc80
+#define PCI_0_MODE							0xd00
+#define PCI_1_MODE							0xd80
+#define PCI_0_RETRY						0xc04
+#define PCI_1_RETRY						0xc84
+#define PCI_0_READ_BUFFER_DISCARD_TIMER				0xd04
+#define PCI_1_READ_BUFFER_DISCARD_TIMER				0xd84
+#define PCI_0_MSI_TRIGGER_TIMER						0xc38
+#define PCI_1_MSI_TRIGGER_TIMER						0xcb8
+#define PCI_0_ARBITER_CONTROL						0x1d00
+#define PCI_1_ARBITER_CONTROL						0x1d80
+#define PCI_0_CROSS_BAR_CONTROL_LOW				0x1d08
+#define PCI_1_CROSS_BAR_CONTROL_LOW				0x1d88
+#define PCI_0_CROSS_BAR_CONTROL_HIGH				0x1d0c
+#define PCI_1_CROSS_BAR_CONTROL_HIGH				0x1d8c
+#define PCI_0_CROSS_BAR_TIMEOUT					0x1d04
+#define PCI_1_CROSS_BAR_TIMEOUT					0x1d84
+#define PCI_0_SYNC_BARRIER_TRIGGER_REG				0x1D18
+#define PCI_1_SYNC_BARRIER_TRIGGER_REG				0x1D98
+#define PCI_0_SYNC_BARRIER_VIRTUAL_REG				0x1d10
+#define PCI_1_SYNC_BARRIER_VIRTUAL_REG				0x1d90
+#define PCI_0_P2P_CONFIG						0x1d14
+#define PCI_1_P2P_CONFIG						0x1d94
+
+#define PCI_0_ACCESS_CONTROL_BASE_0_LOW				0x1e00
+#define PCI_0_ACCESS_CONTROL_BASE_0_HIGH			0x1e04
+#define PCI_0_ACCESS_CONTROL_SIZE_0				0x1e08
+#define PCI_0_ACCESS_CONTROL_BASE_1_LOW				0x1e10
+#define PCI_0_ACCESS_CONTROL_BASE_1_HIGH			0x1e14
+#define PCI_0_ACCESS_CONTROL_SIZE_1				0x1e18
+#define PCI_0_ACCESS_CONTROL_BASE_2_LOW				0x1e20
+#define PCI_0_ACCESS_CONTROL_BASE_2_HIGH			0x1e24
+#define PCI_0_ACCESS_CONTROL_SIZE_2				0x1e28
+#define PCI_0_ACCESS_CONTROL_BASE_3_LOW				0x1e30
+#define PCI_0_ACCESS_CONTROL_BASE_3_HIGH			0x1e34
+#define PCI_0_ACCESS_CONTROL_SIZE_3				0x1e38
+#define PCI_0_ACCESS_CONTROL_BASE_4_LOW				0x1e40
+#define PCI_0_ACCESS_CONTROL_BASE_4_HIGH			0x1e44
+#define PCI_0_ACCESS_CONTROL_SIZE_4				0x1e48
+#define PCI_0_ACCESS_CONTROL_BASE_5_LOW				0x1e50
+#define PCI_0_ACCESS_CONTROL_BASE_5_HIGH			0x1e54
+#define PCI_0_ACCESS_CONTROL_SIZE_5				0x1e58
+
+#define PCI_1_ACCESS_CONTROL_BASE_0_LOW				0x1e80
+#define PCI_1_ACCESS_CONTROL_BASE_0_HIGH			0x1e84
+#define PCI_1_ACCESS_CONTROL_SIZE_0				0x1e88
+#define PCI_1_ACCESS_CONTROL_BASE_1_LOW				0x1e90
+#define PCI_1_ACCESS_CONTROL_BASE_1_HIGH			0x1e94
+#define PCI_1_ACCESS_CONTROL_SIZE_1				0x1e98
+#define PCI_1_ACCESS_CONTROL_BASE_2_LOW				0x1ea0
+#define PCI_1_ACCESS_CONTROL_BASE_2_HIGH			0x1ea4
+#define PCI_1_ACCESS_CONTROL_SIZE_2				0x1ea8
+#define PCI_1_ACCESS_CONTROL_BASE_3_LOW				0x1eb0
+#define PCI_1_ACCESS_CONTROL_BASE_3_HIGH			0x1eb4
+#define PCI_1_ACCESS_CONTROL_SIZE_3				0x1eb8
+#define PCI_1_ACCESS_CONTROL_BASE_4_LOW				0x1ec0
+#define PCI_1_ACCESS_CONTROL_BASE_4_HIGH			0x1ec4
+#define PCI_1_ACCESS_CONTROL_SIZE_4				0x1ec8
+#define PCI_1_ACCESS_CONTROL_BASE_5_LOW				0x1ed0
+#define PCI_1_ACCESS_CONTROL_BASE_5_HIGH			0x1ed4
+#define PCI_1_ACCESS_CONTROL_SIZE_5				0x1ed8
+
+/****************************************/
+/*   PCI Configuration Access Registers */
+/****************************************/
+
+#define PCI_0_CONFIG_ADDR				0xcf8
+#define PCI_0_CONFIG_DATA_VIRTUAL_REG				0xcfc
+#define PCI_1_CONFIG_ADDR				0xc78
+#define PCI_1_CONFIG_DATA_VIRTUAL_REG				0xc7c
+#define PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34
+#define PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4
+
+/****************************************/
+/*   PCI Error Report Registers		*/
+/****************************************/
+
+#define PCI_0_SERR_MASK					0xc28
+#define PCI_1_SERR_MASK					0xca8
+#define PCI_0_ERROR_ADDR_LOW						0x1d40
+#define PCI_1_ERROR_ADDR_LOW						0x1dc0
+#define PCI_0_ERROR_ADDR_HIGH						0x1d44
+#define PCI_1_ERROR_ADDR_HIGH						0x1dc4
+#define PCI_0_ERROR_ATTRIBUTE						0x1d48
+#define PCI_1_ERROR_ATTRIBUTE						0x1dc8
+#define PCI_0_ERROR_COMMAND						0x1d50
+#define PCI_1_ERROR_COMMAND						0x1dd0
+#define PCI_0_ERROR_CAUSE						0x1d58
+#define PCI_1_ERROR_CAUSE						0x1dd8
+#define PCI_0_ERROR_MASK						0x1d5c
+#define PCI_1_ERROR_MASK						0x1ddc
+
+/****************************************/
+/*   PCI Debug Registers		*/
+/****************************************/
+
+#define PCI_0_MMASK							0X1D24
+#define PCI_1_MMASK							0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+#define PCI_DEVICE_AND_VENDOR_ID			0x000
+#define PCI_STATUS_AND_COMMAND			0x004
+#define PCI_CLASS_CODE_AND_REVISION_ID			0x008
+#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE		0x00C
+
+#define PCI_SCS_0_BASE_ADDR_LOW				0x010
+#define PCI_SCS_0_BASE_ADDR_HIGH			0x014
+#define PCI_SCS_1_BASE_ADDR_LOW				0x018
+#define PCI_SCS_1_BASE_ADDR_HIGH			0x01C
+#define PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW    0x020
+#define PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH   0x024
+ /*#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	0x02c1 */
+#define PCI_EXPANSION_ROM_BASE_ADDR_REG		0x030
+#define PCI_CAPABILTY_LIST_POINTER				0x034
+#define PCI_INTERRUPT_PIN_AND_LINE			0x03C
+       /* capability list */
+#define PCI_POWER_MANAGEMENT_CAPABILITY				0x040
+#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL	     0x044
+#define PCI_VPD_ADDR							0x048
+#define PCI_VPD_DATA							0x04c
+#define PCI_MSI_MESSAGE_CONTROL					0x050
+#define PCI_MSI_MESSAGE_ADDR						0x054
+#define PCI_MSI_MESSAGE_UPPER_ADDR				0x058
+#define PCI_MSI_MESSAGE_DATA						0x05c
+#define PCI_X_COMMAND							0x060
+#define PCI_X_STATUS							0x064
+#define PCI_COMPACT_PCI_HOT_SWAP				0x068
+
+/***********************************************/
+/*   PCI Configuration, Function 1, Registers  */
+/***********************************************/
+
+#define PCI_SCS_2_BASE_ADDR_LOW				0x110
+#define PCI_SCS_2_BASE_ADDR_HIGH			0x114
+#define PCI_SCS_3_BASE_ADDR_LOW				0x118
+#define PCI_SCS_3_BASE_ADDR_HIGH			0x11c
+#define PCI_INTERNAL_SRAM_BASE_ADDR_LOW					0x120
+#define PCI_INTERNAL_SRAM_BASE_ADDR_HIGH				0x124
+
+/***********************************************/
+/*  PCI Configuration, Function 2, Registers   */
+/***********************************************/
+
+#define PCI_DEVCS_0_BASE_ADDR_LOW			0x210
+#define PCI_DEVCS_0_BASE_ADDR_HIGH			0x214
+#define PCI_DEVCS_1_BASE_ADDR_LOW			0x218
+#define PCI_DEVCS_1_BASE_ADDR_HIGH				0x21c
+#define PCI_DEVCS_2_BASE_ADDR_LOW			0x220
+#define PCI_DEVCS_2_BASE_ADDR_HIGH				0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 3, Registers   */
+/***********************************************/
+
+#define PCI_DEVCS_3_BASE_ADDR_LOW			0x310
+#define PCI_DEVCS_3_BASE_ADDR_HIGH			0x314
+#define PCI_BOOT_CS_BASE_ADDR_LOW			0x318
+#define PCI_BOOT_CS_BASE_ADDR_HIGH				0x31c
+#define PCI_CPU_BASE_ADDR_LOW				0x220
+#define PCI_CPU_BASE_ADDR_HIGH				0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 4, Registers   */
+/***********************************************/
+
+#define PCI_P2P_MEM0_BASE_ADDR_LOW			0x410
+#define PCI_P2P_MEM0_BASE_ADDR_HIGH			0x414
+#define PCI_P2P_MEM1_BASE_ADDR_LOW			0x418
+#define PCI_P2P_MEM1_BASE_ADDR_HIGH			0x41c
+#define PCI_P2P_I_O_BASE_ADDR						0x420
+#define PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR		  0x424
+
+/****************************** MV64360 and MV64460 PCI End ***************************/
+/****************************************/
+/* I20 Support registers				*/
+/****************************************/
+
+#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x01C
+#define INBOUND_DOORBELL_REGISTER_PCI_SIDE		0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE		0x02C
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x044
+#define QUEUE_CONTROL_REGISTER_PCI_SIDE			0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE		0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x06C
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x07C
+
+#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1C10
+#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1C14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1C18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1C1C
+#define INBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1C20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1C24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1C28
+#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1C2C
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1C30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1C34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE		0x1C40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE		0x1C44
+#define QUEUE_CONTROL_REGISTER_CPU_SIDE				0x1C50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE			0x1C54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C6C
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE		0x1C78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE		0x1C7C
+
+
+/****************************************/
+/* Messaging Unit Registers (I20)	*/
+/****************************************/
+
+#define I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE			0x010
+#define I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE				0x014
+#define I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE				0x018
+#define I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE				0x01C
+#define I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE				0x020
+#define I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE		0x024
+#define I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE			0x028
+#define I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE				0x02C
+#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE		0x030
+#define I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE		0x034
+#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE		0x040
+#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE		0x044
+#define I2O_QUEUE_CONTROL_REG_PCI_0_SIDE			0x050
+#define I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE			0x054
+#define I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE		0x060
+#define I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE		0x064
+#define I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE		0x068
+#define I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE		0x06C
+#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE		0x070
+#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE		0x074
+#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE		0x0F8
+#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE		0x0FC
+
+#define I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE			0x090
+#define I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE				0x094
+#define I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE				0x098
+#define I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE				0x09C
+#define I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE				0x0A0
+#define I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE		0x0A4
+#define I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE			0x0A8
+#define I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE				0x0AC
+#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE		0x0B0
+#define I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE		0x0B4
+#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE		0x0C0
+#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE		0x0C4
+#define I2O_QUEUE_CONTROL_REG_PCI_1_SIDE			0x0D0
+#define I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE			0x0D4
+#define I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE		0x0E0
+#define I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE		0x0E4
+#define I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE		0x0E8
+#define I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE		0x0EC
+#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE		0x0F0
+#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE		0x0F4
+#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE		0x078
+#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE		0x07C
+
+#define I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE			0x1C10
+#define I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE				0x1C14
+#define I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE				0x1C18
+#define I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE				0x1C1C
+#define I2O_INBOUND_DOORBELL_REG_CPU0_SIDE				0x1C20
+#define I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE			0x1C24
+#define I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE			0x1C28
+#define I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE				0x1C2C
+#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE		0x1C30
+#define I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE		0x1C34
+#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE		0x1C40
+#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE		0x1C44
+#define I2O_QUEUE_CONTROL_REG_CPU0_SIDE				0x1C50
+#define I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE				0x1C54
+#define I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE		0x1C60
+#define I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE		0x1C64
+#define I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE		0x1C68
+#define I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE		0x1C6C
+#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE		0x1C70
+#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE		0x1C74
+#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE		0x1CF8
+#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE		0x1CFC
+#define I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE			0x1C90
+#define I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE				0x1C94
+#define I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE				0x1C98
+#define I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE				0x1C9C
+#define I2O_INBOUND_DOORBELL_REG_CPU1_SIDE				0x1CA0
+#define I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE			0x1CA4
+#define I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE			0x1CA8
+#define I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE				0x1CAC
+#define I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE		0x1CB0
+#define I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE		0x1CB4
+#define I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE		0x1CC0
+#define I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE		0x1CC4
+#define I2O_QUEUE_CONTROL_REG_CPU1_SIDE				0x1CD0
+#define I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE				0x1CD4
+#define I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE		0x1CE0
+#define I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE		0x1CE4
+#define I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE		0x1CE8
+#define I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE		0x1CEC
+#define I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE		0x1CF0
+#define I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE		0x1CF4
+#define I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE		0x1C78
+#define I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE		0x1C7C
+
+
+/****************************************/
+/* Communication Unit Registers		*/
+/****************************************/
+/*
+#define ETHERNET_0_ADDRESS_CONTROL_LOW						0xf200
+#define ETHERNET_0_ADDRESS_CONTROL_HIGH			    0xf204
+#define ETHERNET_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS	    0xf208
+#define ETHERNET_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS	    0xf20c
+#define ETHERNET_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf210
+#define ETHERNET_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf214
+#define ETHERNET_0_HASH_TABLE_PCI_HIGH_ADDRESS		    0xf218
+#define ETHERNET_1_ADDRESS_CONTROL_LOW			    0xf220
+#define ETHERNET_1_ADDRESS_CONTROL_HIGH			    0xf224
+#define ETHERNET_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS	    0xf228
+#define ETHERNET_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS	    0xf22c
+#define ETHERNET_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf230
+#define ETHERNET_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf234
+#define ETHERNET_1_HASH_TABLE_PCI_HIGH_ADDRESS		    0xf238
+#define ETHERNET_2_ADDRESS_CONTROL_LOW			    0xf240
+#define ETHERNET_2_ADDRESS_CONTROL_HIGH			    0xf244
+#define ETHERNET_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS	    0xf248
+#define ETHERNET_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS	    0xf24c
+#define ETHERNET_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf250
+#define ETHERNET_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf254
+#define ETHERNET_2_HASH_TABLE_PCI_HIGH_ADDRESS		    0xf258
+ */
+#define MPSC_0_ADDRESS_CONTROL_LOW			    0xf280
+#define MPSC_0_ADDRESS_CONTROL_HIGH			    0xf284
+#define MPSC_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		    0xf288
+#define MPSC_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		    0xf28c
+#define MPSC_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf290
+#define MPSC_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf294
+#define MPSC_1_ADDRESS_CONTROL_LOW			    0xf2c0
+#define MPSC_1_ADDRESS_CONTROL_HIGH			    0xf2c4
+#define MPSC_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS		    0xf2c8
+#define MPSC_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS		    0xf2cc
+#define MPSC_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf2d0
+#define MPSC_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS	    0xf2d4
+ /*#define SERIAL_INIT_PCI_HIGH_ADDRESS			       0xf3201 */
+#define COMM_UNIT_ARBITER_CONTROL			    0xf300
+#define COMM_UNIT_CROSS_BAR_TIMEOUT			    0xf304
+#define COMM_UNIT_INTERRUPT_CAUSE			    0xf310
+#define COMM_UNIT_INTERRUPT_MASK			    0xf314
+#define COMM_UNIT_ERROR_ADDRESS				    0xf314
+/****************************************/
+/*    Serial Initialization registers	*/
+/****************************************/
+
+ /*#define SERIAL_INIT_LAST_DATA					0xf3241 */
+ /*#define SERIAL_INIT_STATUS_AND_CONTROL			0xf3281 */
+#define SERIAL_INIT_LAST_DATA						0xf324
+#define SERIAL_INIT_CONTROL						0xf328
+#define SERIAL_INIT_STATUS						0xf32c
+
+
+/****************************************/
+/*	  Ethernet Unit Registers		*/
+/****************************************/
+
+#define ETH_PHY_ADDR_REG			0x2000
+#define ETH_SMI_REG					0x2004
+#define ETH_UNIT_DEFAULT_ADDR_REG		0x2008
+#define ETH_UNIT_DEFAULTID_REG			0x200c
+#define ETH_UNIT_INTERRUPT_CAUSE_REG	0x2080
+#define ETH_UNIT_INTERRUPT_MASK_REG	0x2084
+#define ETH_UNIT_INTERNAL_USE_REG		0x24fc
+#define ETH_UNIT_ERROR_ADDR_REG			0x2094
+#define ETH_BAR_0					0x2200
+#define ETH_BAR_1					0x2208
+#define ETH_BAR_2					0x2210
+#define ETH_BAR_3					0x2218
+#define ETH_BAR_4					0x2220
+#define ETH_BAR_5					0x2228
+#define ETH_SIZE_REG_0				0x2204
+#define ETH_SIZE_REG_1				0x220c
+#define ETH_SIZE_REG_2				0x2214
+#define ETH_SIZE_REG_3				0x221c
+#define ETH_SIZE_REG_4				0x2224
+#define ETH_SIZE_REG_5					0x222c
+#define ETH_HEADERS_RETARGET_BASE_REG			0x2230
+#define ETH_HEADERS_RETARGET_CONTROL_REG	0x2234
+#define ETH_HIGH_ADDR_REMAP_REG_0		0x2280
+#define ETH_HIGH_ADDR_REMAP_REG_1		0x2284
+#define ETH_HIGH_ADDR_REMAP_REG_2		0x2288
+#define ETH_HIGH_ADDR_REMAP_REG_3			0x228c
+#define ETH_BASE_ADDR_ENABLE_REG			0x2290
+#define ETH_ACCESS_PROTECTION_REG(port)			(0x2294 + (port<<2))
+#define ETH_MIB_COUNTERS_BASE(port)			(0x3000 + (port<<7))
+#define ETH_PORT_CONFIG_REG(port)				(0x2400 + (port<<10))
+#define ETH_PORT_CONFIG_EXTEND_REG(port)		(0x2404 + (port<<10))
+#define ETH_MII_SERIAL_PARAMETRS_REG(port)		(0x2408 + (port<<10))
+#define ETH_GMII_SERIAL_PARAMETRS_REG(port)		(0x240c + (port<<10))
+#define ETH_VLAN_ETHERTYPE_REG(port)			(0x2410 + (port<<10))
+#define ETH_MAC_ADDR_LOW(port)					(0x2414 + (port<<10))
+#define ETH_MAC_ADDR_HIGH(port)					(0x2418 + (port<<10))
+#define ETH_SDMA_CONFIG_REG(port)				(0x241c + (port<<10))
+#define ETH_DSCP_0(port)					(0x2420 + (port<<10))
+#define ETH_DSCP_1(port)					(0x2424 + (port<<10))
+#define ETH_DSCP_2(port)					(0x2428 + (port<<10))
+#define ETH_DSCP_3(port)					(0x242c + (port<<10))
+#define ETH_DSCP_4(port)					(0x2430 + (port<<10))
+#define ETH_DSCP_5(port)					(0x2434 + (port<<10))
+#define ETH_DSCP_6(port)					(0x2438 + (port<<10))
+#define ETH_PORT_SERIAL_CONTROL_REG(port)		(0x243c + (port<<10))
+#define ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		(0x2440 + (port<<10))
+#define ETH_PORT_STATUS_REG(port)				(0x2444 + (port<<10))
+#define ETH_TRANSMIT_QUEUE_COMMAND_REG(port)	(0x2448 + (port<<10))
+#define ETH_TX_QUEUE_FIXED_PRIORITY(port)		(0x244c + (port<<10))
+#define ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)		(0x2450 + (port<<10))
+#define ETH_MAXIMUM_TRANSMIT_UNIT(port)				(0x2458 + (port<<10))
+#define ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)		(0x245c + (port<<10))
+#define ETH_INTERRUPT_CAUSE_REG(port)				(0x2460 + (port<<10))
+#define ETH_INTERRUPT_CAUSE_EXTEND_REG(port)			(0x2464 + (port<<10))
+#define ETH_INTERRUPT_MASK_REG(port)				(0x2468 + (port<<10))
+#define ETH_INTERRUPT_EXTEND_MASK_REG(port)			(0x246c + (port<<10))
+#define ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)			(0x2470 + (port<<10))
+#define ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)			(0x2474 + (port<<10))
+#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port)			(0x247c + (port<<10))
+#define ETH_RX_DISCARDED_FRAMES_COUNTER(port)			(0x2484 + (port<<10)
+#define ETH_PORT_DEBUG_0_REG(port)					(0x248c + (port<<10))
+#define ETH_PORT_DEBUG_1_REG(port)					(0x2490 + (port<<10))
+#define ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)			(0x2494 + (port<<10))
+#define ETH_INTERNAL_USE_REG(port)					(0x24fc + (port<<10))
+#define ETH_RECEIVE_QUEUE_COMMAND_REG(port)			(0x2680 + (port<<10))
+#define ETH_CURRENT_SERVED_TX_DESC_PTR(port)			(0x2684 + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)			(0x260c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)			(0x261c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)			(0x262c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)			(0x263c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)			(0x264c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)			(0x265c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)			(0x266c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)			(0x267c + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)			(0x26c0 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)			(0x26c4 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)			(0x26c8 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)			(0x26cc + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)			(0x26d0 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)			(0x26d4 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)			(0x26d8 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)			(0x26dc + (port<<10))
+#define ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)			(0x2700 + (port<<10))
+#define ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)			(0x2710 + (port<<10))
+#define ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)			(0x2720 + (port<<10))
+#define ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)			(0x2730 + (port<<10))
+#define ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)			(0x2740 + (port<<10))
+#define ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)			(0x2750 + (port<<10))
+#define ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)			(0x2760 + (port<<10))
+#define ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)			(0x2770 + (port<<10))
+#define ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)		(0x2704 + (port<<10))
+#define ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)		(0x2714 + (port<<10))
+#define ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)		(0x2724 + (port<<10))
+#define ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)		(0x2734 + (port<<10))
+#define ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)		(0x2744 + (port<<10))
+#define ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)		(0x2754 + (port<<10))
+#define ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)		(0x2764 + (port<<10))
+#define ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)		(0x2774 + (port<<10))
+#define ETH_TX_QUEUE_0_ARBITER_CONFIG(port)			(0x2708 + (port<<10))
+#define ETH_TX_QUEUE_1_ARBITER_CONFIG(port)			(0x2718 + (port<<10))
+#define ETH_TX_QUEUE_2_ARBITER_CONFIG(port)			(0x2728 + (port<<10))
+#define ETH_TX_QUEUE_3_ARBITER_CONFIG(port)			(0x2738 + (port<<10))
+#define ETH_TX_QUEUE_4_ARBITER_CONFIG(port)			(0x2748 + (port<<10))
+#define ETH_TX_QUEUE_5_ARBITER_CONFIG(port)			(0x2758 + (port<<10))
+#define ETH_TX_QUEUE_6_ARBITER_CONFIG(port)			(0x2768 + (port<<10))
+#define ETH_TX_QUEUE_7_ARBITER_CONFIG(port)			(0x2778 + (port<<10))
+#define ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)			(0x2780 + (port<<10))
+#define ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)	(0x3400 + (port<<10))
+#define ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)		(0x3500 + (port<<10))
+#define ETH_DA_FILTER_UNICAST_TABLE_BASE(port)			(0x3600 + (port<<10))
+
+/****************************************/
+/* Cunit Debug	(for internal use)     */
+/****************************************/
+
+#define CUNIT_ADDRESS					    0xf340
+#define CUNIT_COMMAND_AND_ID				    0xf344
+#define CUNIT_WRITE_DATA_LOW				    0xf348
+#define CUNIT_WRITE_DATA_HIGH				    0xf34c
+#define CUNIT_WRITE_BYTE_ENABLE				    0xf358
+#define CUNIT_READ_DATA_LOW				    0xf350
+#define CUNIT_READ_DATA_HIGH				    0xf354
+#define CUNIT_READ_ID					    0xf35c
+
+/****************************************/
+/* Fast Ethernet Unit Registers		*/
+/****************************************/
+
+/****************************************/
+/*	  Ethernet Unit Registers		*/
+/****************************************/
+
+#define ETH_PHY_ADDR_REG				0x2000
+#define ETH_SMI_REG						0x2004
+#define ETH_UNIT_DEFAULT_ADDR_REG			0x2008
+#define ETH_UNIT_DEFAULTID_REG				0x200c
+#define ETH_UNIT_INTERRUPT_CAUSE_REG			0x2080
+#define ETH_UNIT_INTERRUPT_MASK_REG		0x2084
+#define ETH_UNIT_INTERNAL_USE_REG			0x24fc
+#define ETH_UNIT_ERROR_ADDR_REG				0x2094
+#define ETH_BAR_0						0x2200
+#define ETH_BAR_1						0x2208
+#define ETH_BAR_2						0x2210
+#define ETH_BAR_3						0x2218
+#define ETH_BAR_4						0x2220
+#define ETH_BAR_5						0x2228
+#define ETH_SIZE_REG_0						0x2204
+#define ETH_SIZE_REG_1						0x220c
+#define ETH_SIZE_REG_2						0x2214
+#define ETH_SIZE_REG_3						0x221c
+#define ETH_SIZE_REG_4						0x2224
+#define ETH_SIZE_REG_5						0x222c
+#define ETH_HEADERS_RETARGET_BASE_REG			0x2230
+#define ETH_HEADERS_RETARGET_CONTROL_REG	0x2234
+#define ETH_HIGH_ADDR_REMAP_REG_0			0x2280
+#define ETH_HIGH_ADDR_REMAP_REG_1		0x2284
+#define ETH_HIGH_ADDR_REMAP_REG_2		0x2288
+#define ETH_HIGH_ADDR_REMAP_REG_3			0x228c
+#define ETH_BASE_ADDR_ENABLE_REG			0x2290
+#define ETH_ACCESS_PROTECTION_REG(port)			(0x2294 + (port<<2))
+#define ETH_MIB_COUNTERS_BASE(port)			(0x3000 + (port<<7))
+#define ETH_PORT_CONFIG_REG(port)			(0x2400 + (port<<10))
+#define ETH_PORT_CONFIG_EXTEND_REG(port)		(0x2404 + (port<<10))
+#define ETH_MII_SERIAL_PARAMETRS_REG(port)		(0x2408 + (port<<10))
+#define ETH_GMII_SERIAL_PARAMETRS_REG(port)		(0x240c + (port<<10))
+#define ETH_VLAN_ETHERTYPE_REG(port)			(0x2410 + (port<<10))
+#define ETH_MAC_ADDR_LOW(port)					(0x2414 + (port<<10))
+#define ETH_MAC_ADDR_HIGH(port)					(0x2418 + (port<<10))
+#define ETH_SDMA_CONFIG_REG(port)			(0x241c + (port<<10))
+#define ETH_DSCP_0(port)					(0x2420 + (port<<10))
+#define ETH_DSCP_1(port)					(0x2424 + (port<<10))
+#define ETH_DSCP_2(port)					(0x2428 + (port<<10))
+#define ETH_DSCP_3(port)					(0x242c + (port<<10))
+#define ETH_DSCP_4(port)					(0x2430 + (port<<10))
+#define ETH_DSCP_5(port)					(0x2434 + (port<<10))
+#define ETH_DSCP_6(port)					(0x2438 + (port<<10))
+#define ETH_PORT_SERIAL_CONTROL_REG(port)	(0x243c + (port<<10))
+#define ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port)		(0x2440 + (port<<10))
+#define ETH_PORT_STATUS_REG(port)				(0x2444 + (port<<10))
+#define ETH_TRANSMIT_QUEUE_COMMAND_REG(port)	(0x2448 + (port<<10))
+#define ETH_TX_QUEUE_FIXED_PRIORITY(port)		(0x244c + (port<<10))
+#define ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port)	   (0x2450 + (port<<10))
+#define ETH_MAXIMUM_TRANSMIT_UNIT(port)			(0x2458 + (port<<10))
+#define ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port)	   (0x245c + (port<<10))
+#define ETH_INTERRUPT_CAUSE_REG(port)			(0x2460 + (port<<10))
+#define ETH_INTERRUPT_CAUSE_EXTEND_REG(port)		(0x2464 + (port<<10))
+#define ETH_INTERRUPT_MASK_REG(port)			(0x2468 + (port<<10))
+#define ETH_INTERRUPT_EXTEND_MASK_REG(port)		(0x246c + (port<<10))
+#define ETH_RX_FIFO_URGENT_THRESHOLD_REG(port)	(0x2470 + (port<<10))
+#define ETH_TX_FIFO_URGENT_THRESHOLD_REG(port)	(0x2474 + (port<<10))
+#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port)		(0x247c + (port<<10))
+#define ETH_RX_DISCARDED_FRAMES_COUNTER(port)	(0x2484 + (port<<10)
+#define ETH_PORT_DEBUG_0_REG(port)				(0x248c + (port<<10))
+#define ETH_PORT_DEBUG_1_REG(port)				(0x2490 + (port<<10))
+#define ETH_PORT_INTERNAL_ADDR_ERROR_REG(port)	(0x2494 + (port<<10))
+#define ETH_INTERNAL_USE_REG(port)				(0x24fc + (port<<10))
+#define ETH_RECEIVE_QUEUE_COMMAND_REG(port)	(0x2680 + (port<<10))
+#define ETH_CURRENT_SERVED_TX_DESC_PTR(port)		(0x2684 + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port)		(0x260c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port)	(0x261c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port)		(0x262c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port)		(0x263c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port)		(0x264c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port)		(0x265c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port)		(0x266c + (port<<10))
+#define ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port)		(0x267c + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port)	(0x26c0 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port)	(0x26c4 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port)	(0x26c8 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port)		(0x26cc + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port)		(0x26d0 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port)		(0x26d4 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port)		(0x26d8 + (port<<10))
+#define ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port)		(0x26dc + (port<<10))
+#define ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port)		   (0x2700 + (port<<10))
+#define ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port)		   (0x2710 + (port<<10))
+#define ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port)		   (0x2720 + (port<<10))
+#define ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port)		   (0x2730 + (port<<10))
+#define ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port)		   (0x2740 + (port<<10))
+#define ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port)		   (0x2750 + (port<<10))
+#define ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port)		   (0x2760 + (port<<10))
+#define ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port)		   (0x2770 + (port<<10))
+#define ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port)	   (0x2704 + (port<<10))
+#define ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port)	   (0x2714 + (port<<10))
+#define ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port)	   (0x2724 + (port<<10))
+#define ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port)	   (0x2734 + (port<<10))
+#define ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port)	   (0x2744 + (port<<10))
+#define ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port)	   (0x2754 + (port<<10))
+#define ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port)	   (0x2764 + (port<<10))
+#define ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port)	   (0x2774 + (port<<10))
+#define ETH_TX_QUEUE_0_ARBITER_CONFIG(port)		(0x2708 + (port<<10))
+#define ETH_TX_QUEUE_1_ARBITER_CONFIG(port)		(0x2718 + (port<<10))
+#define ETH_TX_QUEUE_2_ARBITER_CONFIG(port)		(0x2728 + (port<<10))
+#define ETH_TX_QUEUE_3_ARBITER_CONFIG(port)		(0x2738 + (port<<10))
+#define ETH_TX_QUEUE_4_ARBITER_CONFIG(port)		(0x2748 + (port<<10))
+#define ETH_TX_QUEUE_5_ARBITER_CONFIG(port)		(0x2758 + (port<<10))
+#define ETH_TX_QUEUE_6_ARBITER_CONFIG(port)		(0x2768 + (port<<10))
+#define ETH_TX_QUEUE_7_ARBITER_CONFIG(port)		(0x2778 + (port<<10))
+#define ETH_PORT_TX_TOKEN_BUCKET_COUNT(port)		(0x2780 + (port<<10))
+#define ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port)   (0x3400 + (port<<10))
+#define ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port)	   (0x3500 + (port<<10))
+#define ETH_DA_FILTER_UNICAST_TABLE_BASE(port)		(0x3600 + (port<<10))
+
+
+/* Ethernet GT64260 */
+/*
+#define ETHERNET_PHY_ADDRESS_REGISTER					0x2000
+#define ETHERNET_SMI_REGISTER							0x2010
+*/
+/* Ethernet 0 */
+/*
+#define ETHERNET0_PORT_CONFIGURATION_REGISTER				0x2400
+#define ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER		0x2408
+#define ETHERNET0_PORT_COMMAND_REGISTER					0x2410
+#define ETHERNET0_PORT_STATUS_REGISTER					0x2418
+#define ETHERNET0_SERIAL_PARAMETRS_REGISTER				0x2420
+#define ETHERNET0_HASH_TABLE_POINTER_REGISTER				0x2428
+#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2430
+#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2438
+#define ETHERNET0_SDMA_CONFIGURATION_REGISTER			0x2440
+#define ETHERNET0_SDMA_COMMAND_REGISTER					0x2448
+#define ETHERNET0_INTERRUPT_CAUSE_REGISTER				0x2450
+#define ETHERNET0_INTERRUPT_MASK_REGISTER				0x2458
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0				0x2480
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER1				0x2484
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER2				0x2488
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER3				0x248c
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0		0x24a0
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER1		0x24a4
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER2		0x24a8
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER3		0x24ac
+#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0		0x24e0
+#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1		0x24e4
+#define ETHERNET0_MIB_COUNTER_BASE					0x2500
+*/
+/* Ethernet 1 */
+/*
+#define ETHERNET1_PORT_CONFIGURATION_REGISTER				0x2800
+#define ETHERNET1_PORT_CONFIGURATION_EXTEND_REGISTER		0x2808
+#define ETHERNET1_PORT_COMMAND_REGISTER					0x2810
+#define ETHERNET1_PORT_STATUS_REGISTER					0x2818
+#define ETHERNET1_SERIAL_PARAMETRS_REGISTER				0x2820
+#define ETHERNET1_HASH_TABLE_POINTER_REGISTER				0x2828
+#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2830
+#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2838
+#define ETHERNET1_SDMA_CONFIGURATION_REGISTER			0x2840
+#define ETHERNET1_SDMA_COMMAND_REGISTER					0x2848
+#define ETHERNET1_INTERRUPT_CAUSE_REGISTER				0x2850
+#define ETHERNET1_INTERRUPT_MASK_REGISTER				0x2858
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER0				0x2880
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER1				0x2884
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER2				0x2888
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER3				0x288c
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER0		0x28a0
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER1		0x28a4
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER2		0x28a8
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER3		0x28ac
+#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER0		0x28e0
+#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER1		0x28e4
+#define ETHERNET1_MIB_COUNTER_BASE					0x2900
+*/
+/* Ethernet 2 */
+/*
+#define ETHERNET2_PORT_CONFIGURATION_REGISTER				0x2c00
+#define ETHERNET2_PORT_CONFIGURATION_EXTEND_REGISTER		0x2c08
+#define ETHERNET2_PORT_COMMAND_REGISTER					0x2c10
+#define ETHERNET2_PORT_STATUS_REGISTER					0x2c18
+#define ETHERNET2_SERIAL_PARAMETRS_REGISTER				0x2c20
+#define ETHERNET2_HASH_TABLE_POINTER_REGISTER				0x2c28
+#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_LOW		0x2c30
+#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_HIGH		0x2c38
+#define ETHERNET2_SDMA_CONFIGURATION_REGISTER			0x2c40
+#define ETHERNET2_SDMA_COMMAND_REGISTER					0x2c48
+#define ETHERNET2_INTERRUPT_CAUSE_REGISTER				0x2c50
+#define ETHERNET2_INTERRUPT_MASK_REGISTER				0x2c58
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER0				0x2c80
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER1				0x2c84
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER2				0x2c88
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER3				0x2c8c
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER0		0x2ca0
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER1		0x2ca4
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER2		0x2ca8
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER3		0x2cac
+#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER0		0x2ce0
+#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER1		0x2ce4
+#define ETHERNET2_MIB_COUNTER_BASE					0x2d00
+*/
+
+/****************************************/
+/* SDMA Registers			*/
+/****************************************/
+
+#define SDMA_GROUP_CONFIGURATION_REGISTER			0xb1f0
+#define CHANNEL0_CONFIGURATION_REGISTER				0x4000
+#define CHANNEL0_COMMAND_REGISTER				0x4008
+#define CHANNEL0_RX_CMD_STATUS					0x4800
+#define CHANNEL0_RX_PACKET_AND_BUFFER_SIZES		    0x4804
+#define CHANNEL0_RX_BUFFER_POINTER				0x4808
+#define CHANNEL0_RX_NEXT_POINTER				0x480c
+#define CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER		0x4810
+#define CHANNEL0_TX_CMD_STATUS					0x4C00
+#define CHANNEL0_TX_PACKET_SIZE					0x4C04
+#define CHANNEL0_TX_BUFFER_POINTER				0x4C08
+#define CHANNEL0_TX_NEXT_POINTER				0x4C0c
+#define CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER		0x4c10
+#define CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER			0x4c14
+/*
+#define CHANNEL1_CONFIGURATION_REGISTER				0x5000
+#define CHANNEL1_COMMAND_REGISTER				0x5008
+#define CHANNEL1_RX_CMD_STATUS					0x5800
+#define CHANNEL1_RX_PACKET_AND_BUFFER_SIZES		    0x5804
+#define CHANNEL1_RX_BUFFER_POINTER				0x5808
+#define CHANNEL1_RX_NEXT_POINTER				0x580c
+#define CHANNEL1_TX_CMD_STATUS					0x5C00
+#define CHANNEL1_TX_PACKET_SIZE					0x5C04
+#define CHANNEL1_TX_BUFFER_POINTER				0x5C08
+#define CHANNEL1_TX_NEXT_POINTER				0x5C0c
+#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER		0x5810
+#define CHANNEL1_CURRENT_TX_DESCRIPTOR_POINTER		0x5c10
+#define CHANNEL1_FIRST_TX_DESCRIPTOR_POINTER			0x5c14
+#define CHANNEL2_CONFIGURATION_REGISTER				0x6000
+#define CHANNEL2_COMMAND_REGISTER				0x6008
+#define CHANNEL2_RX_CMD_STATUS					0x6800
+#define CHANNEL2_RX_PACKET_AND_BUFFER_SIZES		    0x6804
+#define CHANNEL2_RX_BUFFER_POINTER				0x6808
+#define CHANNEL2_RX_NEXT_POINTER				0x680c
+#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER		0x6810
+#define CHANNEL2_TX_CMD_STATUS					0x6C00
+#define CHANNEL2_TX_PACKET_SIZE					0x6C04
+#define CHANNEL2_TX_BUFFER_POINTER				0x6C08
+#define CHANNEL2_TX_NEXT_POINTER				0x6C0c
+#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER		0x6810
+#define CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER			0x6c10
+#define CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER			0x6c14
+*/
+/* SDMA Interrupt */
+/*
+#define SDMA_CAUSE							0xb820
+#define SDMA_MASK							0xb8a0
+*/
+/***************************************/
+/*	    SDMA Registers	       */
+/***************************************/
+
+#define SDMA_CONFIG_REG(channel)					(0x4000 + (channel<<13))
+#define SDMA_COMMAND_REG(channel)					(0x4008 + (channel<<13))
+#define SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)		(0x4810 + (channel<<13))
+#define SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)	(0x4c10 + (channel<<13))
+#define SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)	(0x4c14 + (channel<<13))
+
+#define SDMA_CAUSE_REG							0xb800
+#define SDMA_MASK_REG							0xb880
+
+/****************************************/
+/* Baude Rate Generators Registers	*/
+/****************************************/
+
+/* BRG 0 */
+#define BRG0_CONFIGURATION_REGISTER		0xb200
+#define BRG0_BAUDE_TUNING_REGISTER			 0xb204
+
+/* BRG 1 */
+#define BRG1_CONFIGURATION_REGISTER			0xb208
+#define BRG1_BAUDE_TUNING_REGISTER			 0xb20c
+
+/* BRG 2 */
+#define BRG2_CONFIGURATION_REGISTER			0xb210
+#define BRG2_BAUDE_TUNING_REGISTER			 0xb214
+
+/* BRG Interrupts */
+#define BRG_CAUSE_REGISTER					0xb834
+#define BRG_MASK_REGISTER					0xb8b4
+#define BRG_CONFIG_REG(brg)					(0xb200 + (brg<<3))
+#define BRG_BAUDE_TUNING_REG(brg)				(0xb208 + (brg<<3))
+#define BRG_CAUSE_REG						BRG_CAUSE_REGISTER  /*0xb8341 */
+#define BRG_MASK_REG						BRG_MASK_REGISTER  /*0xb8b41 */
+
+/* MISC */
+
+#define MAIN_ROUTING_REGISTER						0xb400
+#define RECEIVE_CLOCK_ROUTING_REGISTER				0xb404
+#define TRANSMIT_CLOCK_ROUTING_REGISTER				0xb408
+#define COMM_UNIT_ARBITER_CONFIGURATION_REGISTER	0xb40c
+
+/****************************************/
+/*	   Watchdog registers			*/
+/****************************************/
+#define WATCHDOG_CONFIGURATION_REGISTER			0xb410
+#define WATCHDOG_VALUE_REGISTER					0xb414
+#define WATCHDOG_CONFIG_REG					WATCHDOG_CONFIGURATION_REGISTER	 /*0xb4101 */
+#define WATCHDOG_VALUE_REG						WATCHDOG_VALUE_REGISTER	 /*0xb4141 */
+
+
+/****************************************/
+/* Flex TDM Registers			*/
+/****************************************/
+
+/* FTDM Port */
+
+#define FLEXTDM_TRANSMIT_READ_POINTER			    0xa800
+#define FLEXTDM_RECEIVE_READ_POINTER			    0xa804
+#define FLEXTDM_CONFIGURATION_REGISTER			    0xa808
+#define FLEXTDM_AUX_CHANNELA_TX_REGISTER		    0xa80c
+#define FLEXTDM_AUX_CHANNELA_RX_REGISTER		    0xa810
+#define FLEXTDM_AUX_CHANNELB_TX_REGISTER		    0xa814
+#define FLEXTDM_AUX_CHANNELB_RX_REGISTER		    0xa818
+
+/* FTDM Interrupts */
+
+#define FTDM_CAUSE_REGISTER				    0xb830
+#define FTDM_MASK_REGISTER				    0xb8b0
+
+
+/****************************************/
+/* GPP Interface Registers		*/
+/****************************************/
+
+#define GPP_IO_CONTROL						0xf100
+#define GPP_LEVEL_CONTROL					0xf110
+#define GPP_VALUE						0xf104
+#define GPP_INTERRUPT_CAUSE					0xf108
+#define GPP_INTERRUPT_MASK					0xf10c
+#define GPP_INTERRUPT_MASK0					GPP_INTERRUPT_MASK  /* 0xf10c1 */
+#define GPP_INTERRUPT_MASK1					0xf114
+#define GPP_VALUE_SET						0xf118
+#define GPP_VALUE_CLEAR						0xf11c
+
+/****************************************/
+/*	MPP Interface Registers		*/
+/****************************************/
+#define MPP_CONTROL0						0xf000
+#define MPP_CONTROL1						0xf004
+#define MPP_CONTROL2						0xf008
+#define MPP_CONTROL3						0xf00c
+#define DEBUG_PORT_MULTIPLEX					0xf014
+ /*#define SERIAL_PORT_MULTIPLEX			       0xf0101 */
+
+/****************************************/
+/* Interrupt Controller Registers	*/
+/****************************************/
+
+/****************************************/
+/* Interrupts							*/
+/****************************************/
+/****************************************/
+/* Interrupts (checked I.A. 14.10.02)				*/
+/****************************************/
+
+#define LOW_INTERRUPT_CAUSE_REGISTER			0x004  /* gt64260: 0xc181 */
+#define HIGH_INTERRUPT_CAUSE_REGISTER			0x00c  /* gt64260: 0xc681 */
+#define CPU_INTERRUPT_MASK_REGISTER_LOW		0x014  /* gt64260: 0xc1c1 */
+#define CPU_INTERRUPT_MASK_REGISTER_HIGH		0x01c  /* gt64260: 0xc6c1 */
+#define CPU_SELECT_CAUSE_REGISTER			0x024  /* gt64260: 0xc701 */
+#define CPU_INTERRUPT_1_MASK_REGISTER_LOW		0x034  /* new in the MV64360 and MV64460 */
+#define CPU_INTERRUPT_1_MASK_REGISTER_HIGH		0x03c  /* new in the MV64360 and MV64460 */
+#define CPU_SELECT_1_CAUSE_REGISTER			0x044  /* new in the MV64360 and MV64460 */
+#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW	0x054  /* gt64260: 0xc241 */
+#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0x05c  /* gt64260: 0xc641 */
+#define PCI_0SELECT_CAUSE						0x064  /* gt64260: 0xc741 */
+#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW	0x074  /* gt64260: 0xca41 */
+#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0x07c  /* gt64260: 0xce41 */
+#define PCI_1SELECT_CAUSE						0x084  /* gt64260: 0xcf41 */
+/*#define CPU_INT_0_MASK						0xe60 signal is not multiplexed on MPP in the MV64360 and MV64460 */
+/*#define CPU_INT_1_MASK						0xe64 signal is not multiplexed on MPP in the MV64360 and MV64460 */
+/*#define CPU_INT_2_MASK						0xe68 signal is not multiplexed on MPP in the MV64360 and MV64460 */
+/*#define CPU_INT_3_MASK						0xe6c signal is not multiplexed on MPP in the MV64360 and MV64460 */
+
+#define MAIN_INTERRUPT_CAUSE_LOW				LOW_INTERRUPT_CAUSE_REGISTER  /* 0x0041 */
+#define MAIN_INTERRUPT_CAUSE_HIGH				HIGH_INTERRUPT_CAUSE_REGISTER  /* 0x00c1 */
+#define CPU_INTERRUPT0_MASK_LOW				CPU_INTERRUPT_MASK_REGISTER_LOW	 /* 0x0141 */
+#define CPU_INTERRUPT0_MASK_HIGH			CPU_INTERRUPT_MASK_REGISTER_HIGH  /*0x01c1 */
+#define CPU_INTERRUPT0_SELECT_CAUSE			CPU_SELECT_CAUSE_REGISTER  /* 0x0241 */
+#define CPU_INTERRUPT1_MASK_LOW				CPU_INTERRUPT_1_MASK_REGISTER_LOW  /* 0x0341 */
+#define CPU_INTERRUPT1_MASK_HIGH			CPU_INTERRUPT_1_MASK_REGISTER_HIGH  /* 0x03c1 */
+#define CPU_INTERRUPT1_SELECT_CAUSE			CPU_SELECT_1_CAUSE_REGISTER  /* 0x0441 */
+#define INTERRUPT0_MASK_0_LOW				PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW /* 0x0541 */
+#define INTERRUPT0_MASK_0_HIGH					PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH	 /* 0x05c1 */
+#define INTERRUPT0_SELECT_CAUSE				PCI_0SELECT_CAUSE  /* 0x0641 */
+#define INTERRUPT1_MASK_0_LOW					PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW	/* 0x0741 */
+#define INTERRUPT1_MASK_0_HIGH					PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH	 /* 0x07c1 */
+#define INTERRUPT1_SELECT_CAUSE				PCI_1SELECT_CAUSE  /* 0x0841 */
+
+/****************************************/
+/* I2C Registers			*/
+/****************************************/
+
+#define I2C_SLAVE_ADDRESS					0xc000
+#define I2C_EXTENDED_SLAVE_ADDRESS			0xc040
+#define I2C_DATA						0xc004
+#define I2C_CONTROL						0xc008
+#define I2C_STATUS_BAUDE_RATE					0xc00C
+#define I2C_SOFT_RESET						0xc01c
+#define I2C_SLAVE_ADDR						I2C_SLAVE_ADDRESS  /* 0xc0001 */
+#define I2C_EXTENDED_SLAVE_ADDR					I2C_EXTENDED_SLAVE_ADDRESS  /*0xc0101 */
+
+/****************************************/
+/* MPSC Registers			*/
+/****************************************/
+
+	/*  MPSCs Clocks Routing Registers  */
+
+#define MPSC_ROUTING_REG					0xb400
+#define MPSC_RX_CLOCK_ROUTING_REG			0xb404
+#define MPSC_TX_CLOCK_ROUTING_REG			0xb408
+
+	/*  MPSCs Interrupts Registers	  */
+
+#define MPSC_CAUSE_REG(port)					(0xb804 + (port<<3))
+#define MPSC_MASK_REG(port)					(0xb884 + (port<<3))
+
+#define MPSC_MAIN_CONFIG_LOW(port)			(0x8000 + (port<<12))
+#define MPSC_MAIN_CONFIG_HIGH(port)			(0x8004 + (port<<12))
+#define MPSC_PROTOCOL_CONFIG(port)			(0x8008 + (port<<12))
+#define MPSC_CHANNEL_REG1(port)					(0x800c + (port<<12))
+#define MPSC_CHANNEL_REG2(port)					(0x8010 + (port<<12))
+#define MPSC_CHANNEL_REG3(port)					(0x8014 + (port<<12))
+#define MPSC_CHANNEL_REG4(port)					(0x8018 + (port<<12))
+#define MPSC_CHANNEL_REG5(port)					(0x801c + (port<<12))
+#define MPSC_CHANNEL_REG6(port)					(0x8020 + (port<<12))
+#define MPSC_CHANNEL_REG7(port)					(0x8024 + (port<<12))
+#define MPSC_CHANNEL_REG8(port)					(0x8028 + (port<<12))
+#define MPSC_CHANNEL_REG9(port)					(0x802c + (port<<12))
+#define MPSC_CHANNEL_REG10(port)				(0x8030 + (port<<12))
+
+
+/* MPSC0  */
+
+#define MPSC0_MAIN_CONFIGURATION_LOW			    0x8000
+#define MPSC0_MAIN_CONFIGURATION_HIGH			    0x8004
+#define MPSC0_PROTOCOL_CONFIGURATION			    0x8008
+#define CHANNEL0_REGISTER1				    0x800c
+#define CHANNEL0_REGISTER2				    0x8010
+#define CHANNEL0_REGISTER3				    0x8014
+#define CHANNEL0_REGISTER4				    0x8018
+#define CHANNEL0_REGISTER5				    0x801c
+#define CHANNEL0_REGISTER6				    0x8020
+#define CHANNEL0_REGISTER7				    0x8024
+#define CHANNEL0_REGISTER8				    0x8028
+#define CHANNEL0_REGISTER9				    0x802c
+#define CHANNEL0_REGISTER10				    0x8030
+#define CHANNEL0_REGISTER11				    0x8034
+
+/* MPSC1  */
+
+#define MPSC1_MAIN_CONFIGURATION_LOW			    0x8840
+#define MPSC1_MAIN_CONFIGURATION_HIGH			    0x8844
+#define MPSC1_PROTOCOL_CONFIGURATION			    0x8848
+#define CHANNEL1_REGISTER1				    0x884c
+#define CHANNEL1_REGISTER2				    0x8850
+#define CHANNEL1_REGISTER3				    0x8854
+#define CHANNEL1_REGISTER4				    0x8858
+#define CHANNEL1_REGISTER5				    0x885c
+#define CHANNEL1_REGISTER6				    0x8860
+#define CHANNEL1_REGISTER7				    0x8864
+#define CHANNEL1_REGISTER8				    0x8868
+#define CHANNEL1_REGISTER9				    0x886c
+#define CHANNEL1_REGISTER10				    0x8870
+#define CHANNEL1_REGISTER11				    0x8874
+
+/* MPSC2  */
+
+#define MPSC2_MAIN_CONFIGURATION_LOW			    0x9040
+#define MPSC2_MAIN_CONFIGURATION_HIGH			    0x9044
+#define MPSC2_PROTOCOL_CONFIGURATION			    0x9048
+#define CHANNEL2_REGISTER1				    0x904c
+#define CHANNEL2_REGISTER2				    0x9050
+#define CHANNEL2_REGISTER3				    0x9054
+#define CHANNEL2_REGISTER4				    0x9058
+#define CHANNEL2_REGISTER5				    0x905c
+#define CHANNEL2_REGISTER6				    0x9060
+#define CHANNEL2_REGISTER7				    0x9064
+#define CHANNEL2_REGISTER8				    0x9068
+#define CHANNEL2_REGISTER9				    0x906c
+#define CHANNEL2_REGISTER10				    0x9070
+#define CHANNEL2_REGISTER11				    0x9074
+
+/* MPSCs Interupts  */
+
+#define MPSC0_CAUSE						0xb824
+#define MPSC0_MASK						0xb8a4
+#define MPSC1_CAUSE						0xb828
+#define MPSC1_MASK						0xb8a8
+#define MPSC2_CAUSE						0xb82c
+#define MPSC2_MASK						 0xb8ac
+
+/*******************************************/
+/*	    CUNIT  Registers		   */
+/*******************************************/
+
+	 /* Address Decoding Register Map */
+
+#define CUNIT_BASE_ADDR_REG0					0xf200
+#define CUNIT_BASE_ADDR_REG1					0xf208
+#define CUNIT_BASE_ADDR_REG2					0xf210
+#define CUNIT_BASE_ADDR_REG3					0xf218
+#define CUNIT_SIZE0						0xf204
+#define CUNIT_SIZE1						0xf20c
+#define CUNIT_SIZE2						0xf214
+#define CUNIT_SIZE3						0xf21c
+#define CUNIT_HIGH_ADDR_REMAP_REG0			0xf240
+#define CUNIT_HIGH_ADDR_REMAP_REG1			0xf244
+#define CUNIT_BASE_ADDR_ENABLE_REG			0xf250
+#define MPSC0_ACCESS_PROTECTION_REG			0xf254
+#define MPSC1_ACCESS_PROTECTION_REG			0xf258
+#define CUNIT_INTERNAL_SPACE_BASE_ADDR_REG	0xf25C
+
+	/*  Error Report Registers  */
+
+#define CUNIT_INTERRUPT_CAUSE_REG			0xf310
+#define CUNIT_INTERRUPT_MASK_REG			0xf314
+#define CUNIT_ERROR_ADDR					0xf318
+
+	/*  Cunit Control Registers */
+
+#define CUNIT_ARBITER_CONTROL_REG			0xf300
+#define CUNIT_CONFIG_REG					0xb40c
+#define CUNIT_CRROSBAR_TIMEOUT_REG			0xf304
+
+	/*  Cunit Debug Registers   */
+
+#define CUNIT_DEBUG_LOW						0xf340
+#define CUNIT_DEBUG_HIGH					0xf344
+#define CUNIT_MMASK						0xf380
+
+#endif /* __INCmv_gen_regh */
diff --git a/board/Marvell/include/pci.h b/board/Marvell/include/pci.h
new file mode 100644
index 0000000000..167248db1e
--- /dev/null
+++ b/board/Marvell/include/pci.h
@@ -0,0 +1,293 @@
+/* PCI.h - PCI functions header file */
+
+/* Copyright - Galileo technology. */
+
+#ifndef __INCpcih
+#define __INCpcih
+
+/* includes */
+
+#include"core.h"
+#include"memory.h"
+
+/* According to PCI REV 2.1 MAX agents allowed on the bus are -21- */
+#define PCI_MAX_DEVICES 22
+
+
+/* Macros */
+
+/* The next Macros configurate the initiator board (SELF) or any any agent on
+   the PCI to become: MASTER, response to MEMORY transactions , response to
+   IO transactions or TWO both MEMORY_IO transactions. Those configuration
+   are for both PCI0 and PCI1. */
+
+#define PCI_MEMORY_ENABLE(host, deviceNumber) pciWriteConfigReg(host,	       \
+	  PCI_STATUS_AND_COMMAND,deviceNumber,MEMORY_ENABLE |		     \
+	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber) )
+
+#define PCI_IO_ENABLE(host, deviceNumber) pciWriteConfigReg(host,	       \
+	  PCI_STATUS_AND_COMMAND,deviceNumber,I_O_ENABLE |		     \
+	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber) )
+
+#define PCI_SLAVE_ENABLE(host, deviceNumber) pciWriteConfigReg(host,	       \
+	  PCI_STATUS_AND_COMMAND,deviceNumber,MEMORY_ENABLE | I_O_ENABLE |   \
+	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber) )
+
+#define PCI_DISABLE(host, deviceNumber) pciWriteConfigReg(host,		       \
+	  PCI_STATUS_AND_COMMAND,deviceNumber,0xfffffff8  &		     \
+	  pciReadConfigReg(host, PCI_STATUS_AND_COMMAND,deviceNumber))
+
+#define PCI_MASTER_ENABLE(host,deviceNumber) pciWriteConfigReg(host,	       \
+	  PCI_STATUS_AND_COMMAND,deviceNumber,MASTER_ENABLE |		     \
+	  pciReadConfigReg(host,PCI_STATUS_AND_COMMAND,deviceNumber) )
+
+#define PCI_MASTER_DISABLE(deviceNumber) pciWriteConfigReg(host,	      \
+	  PCI_STATUS_AND_COMMAND,deviceNumber,~MASTER_ENABLE &		     \
+	  pciReadConfigReg(host,PCI_STATUS_AND_COMMAND,deviceNumber) )
+
+#define		MASTER_ENABLE			BIT2
+#define		MEMORY_ENABLE			BIT1
+#define		I_O_ENABLE			BIT0
+#define	    SELF		    32
+
+/* Agent on the PCI bus may have up to 6 BARS. */
+#define	    BAR0		    0x10
+#define	    BAR1		    0x14
+#define	    BAR2		    0x18
+#define	    BAR3		    0x1c
+#define	    BAR4		    0x20
+#define	    BAR5		    0x24
+#define		BAR_SEL_MEM_IO			BIT0
+#define		BAR_MEM_TYPE_32_BIT		NO_BIT
+#define		BAR_MEM_TYPE_BELOW_1M		       BIT1
+#define		BAR_MEM_TYPE_64_BIT			      BIT2
+#define		BAR_MEM_TYPE_RESERVED		      (BIT1 | BIT2)
+#define		BAR_MEM_TYPE_MASK		      (BIT1 | BIT2)
+#define		BAR_PREFETCHABLE				      BIT3
+#define		BAR_CONFIG_MASK			(BIT0 | BIT1 | BIT2 | BIT3)
+
+/* Defines for the access regions. */
+#define	    PREFETCH_ENABLE		    BIT12
+#define	    PREFETCH_DISABLE		    NO_BIT
+#define	    DELAYED_READ_ENABLE		    BIT13
+/* #define     CACHING_ENABLE		       BIT14 */
+/* aggressive prefetch: PCI slave prefetch two burst in advance*/
+#define	    AGGRESSIVE_PREFETCH		     BIT16
+/* read line aggresive prefetch: PCI slave prefetch two burst in advance*/
+#define	    READ_LINE_AGGRESSIVE_PREFETCH   BIT17
+/* read multiple aggresive prefetch: PCI slave prefetch two burst in advance*/
+#define	    READ_MULTI_AGGRESSIVE_PREFETCH  BIT18
+#define	    MAX_BURST_4			    NO_BIT
+#define	    MAX_BURST_8			    BIT20  /* Bits[21:20] = 01 */
+#define	    MAX_BURST_16		    BIT21  /* Bits[21:20] = 10 */
+#define	    PCI_BYTE_SWAP		    NO_BIT /* Bits[25:24] = 00 */
+#define	    PCI_NO_SWAP			    BIT24  /* Bits[25:24] = 01 */
+#define	    PCI_BYTE_AND_WORD_SWAP	    BIT25  /* Bits[25:24] = 10 */
+#define	    PCI_WORD_SWAP		   (BIT24 | BIT25) /* Bits[25:24] = 11 */
+#define	    PCI_ACCESS_PROTECT		    BIT28
+#define	    PCI_WRITE_PROTECT		    BIT29
+
+/* typedefs */
+
+typedef enum __pciAccessRegions{REGION0,REGION1,REGION2,REGION3,REGION4,REGION5,
+				REGION6,REGION7} PCI_ACCESS_REGIONS;
+
+typedef enum __pciAgentPrio{LOW_AGENT_PRIO,HI_AGENT_PRIO} PCI_AGENT_PRIO;
+typedef enum __pciAgentPark{PARK_ON_AGENT,DONT_PARK_ON_AGENT} PCI_AGENT_PARK;
+
+typedef enum __pciSnoopType{PCI_NO_SNOOP,PCI_SNOOP_WT,PCI_SNOOP_WB}
+			    PCI_SNOOP_TYPE;
+typedef enum __pciSnoopRegion{PCI_SNOOP_REGION0,PCI_SNOOP_REGION1,
+			      PCI_SNOOP_REGION2,PCI_SNOOP_REGION3}
+			      PCI_SNOOP_REGION;
+
+typedef enum __memPciHost{PCI_HOST0,PCI_HOST1} PCI_HOST;
+typedef enum __memPciRegion{PCI_REGION0,PCI_REGION1,
+			 PCI_REGION2,PCI_REGION3,
+			 PCI_IO}
+			 PCI_REGION;
+
+/*ronen 7/Dec/03 */
+typedef enum __pci_bar_windows{PCI_CS0_BAR, PCI_CS1_BAR, PCI_CS2_BAR,
+			       PCI_CS3_BAR, PCI_DEV_CS0_BAR, PCI_DEV_CS1_BAR,
+			       PCI_DEV_CS2_BAR, PCI_DEV_CS3_BAR, PCI_BOOT_CS_BAR,
+			       PCI_MEM_INT_REG_BAR, PCI_IO_INT_REG_BAR,
+			       PCI_P2P_MEM0_BAR, PCI_P2P_MEM1_BAR,
+			       PCI_P2P_IO_BAR, PCI_CPU_BAR, PCI_INT_SRAM_BAR,
+			       PCI_LAST_BAR} PCI_INTERNAL_BAR;
+
+typedef struct pciBar {
+    unsigned int detectBase;
+    unsigned int base;
+    unsigned int size;
+    unsigned int type;
+} PCI_BAR;
+
+typedef struct pciDevice {
+    PCI_HOST	     host;
+    char	    type[40];
+    unsigned int    deviceNum;
+    unsigned int    venID;
+    unsigned int    deviceID;
+    PCI_BAR bar[6];
+} PCI_DEVICE;
+
+typedef struct pciSelfBars {
+    unsigned int    SCS0Base;
+    unsigned int    SCS0Size;
+    unsigned int    SCS1Base;
+    unsigned int    SCS1Size;
+    unsigned int    SCS2Base;
+    unsigned int    SCS2Size;
+    unsigned int    SCS3Base;
+    unsigned int    SCS3Size;
+    unsigned int    internalMemBase;
+    unsigned int    internalIOBase;
+    unsigned int    CS0Base;
+    unsigned int    CS0Size;
+    unsigned int    CS1Base;
+    unsigned int    CS1Size;
+    unsigned int    CS2Base;
+    unsigned int    CS2Size;
+    unsigned int    CS3Base;
+    unsigned int    CS3Size;
+    unsigned int    CSBootBase;
+    unsigned int    CSBootSize;
+    unsigned int    P2PMem0Base;
+    unsigned int    P2PMem0Size;
+    unsigned int    P2PMem1Base;
+    unsigned int    P2PMem1Size;
+    unsigned int    P2PIOBase;
+    unsigned int    P2PIOSize;
+    unsigned int    CPUBase;
+    unsigned int    CPUSize;
+} PCI_SELF_BARS;
+
+/* read/write configuration registers on local PCI bus. */
+void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,
+		       unsigned int pciDevNum, unsigned int data);
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+			       unsigned int pciDevNum);
+
+/* read/write configuration registers on another PCI bus. */
+void pciOverBridgeWriteConfigReg(PCI_HOST host,
+				 unsigned int regOffset,
+				 unsigned int pciDevNum,
+				 unsigned int busNum,unsigned int data);
+unsigned int pciOverBridgeReadConfigReg(PCI_HOST host,
+					unsigned int regOffset,
+					unsigned int pciDevNum,
+					unsigned int busNum);
+
+/* Performs full scane on both PCI and returns all detail possible on the
+   agents which exist on the bus. */
+void pciScanDevices(PCI_HOST host, PCI_DEVICE *pci0Detect,
+		    unsigned int numberOfElment);
+
+/*	Master`s memory space	*/
+bool pciMapSpace(PCI_HOST host, PCI_REGION region,
+		unsigned int remapBase,
+		unsigned int deviceBase,
+		unsigned int deviceLength);
+unsigned int pciGetSpaceBase(PCI_HOST host, PCI_REGION region);
+unsigned int pciGetSpaceSize(PCI_HOST host, PCI_REGION region);
+
+/*	Slave`s memory space   */
+void pciMapMemoryBank(PCI_HOST host, MEMORY_BANK bank,
+		      unsigned int pci0Dram0Base, unsigned int pci0Dram0Size);
+
+#if 0 /* GARBAGE routines - dont use till they get cleaned up */
+void pci0ScanSelfBars(PCI_SELF_BARS *pci0SelfBars);
+void pci1ScanSelfBars(PCI_SELF_BARS *pci1SelfBars);
+void pci0MapInternalRegSpace(unsigned int pci0InternalBase);
+void pci1MapInternalRegSpace(unsigned int pci1InternalBase);
+void pci0MapInternalRegIOSpace(unsigned int pci0InternalBase);
+void pci1MapInternalRegIOSpace(unsigned int pci1InternalBase);
+void pci0MapDevice0MemorySpace(unsigned int pci0Dev0Base,
+			       unsigned int pci0Dev0Length);
+void pci1MapDevice0MemorySpace(unsigned int pci1Dev0Base,
+			       unsigned int pci1Dev0Length);
+void pci0MapDevice1MemorySpace(unsigned int pci0Dev1Base,
+			       unsigned int pci0Dev1Length);
+void pci1MapDevice1MemorySpace(unsigned int pci1Dev1Base,
+			       unsigned int pci1Dev1Length);
+void pci0MapDevice2MemorySpace(unsigned int pci0Dev2Base,
+			       unsigned int pci0Dev2Length);
+void pci1MapDevice2MemorySpace(unsigned int pci1Dev2Base,
+			       unsigned int pci1Dev2Length);
+void pci0MapDevice3MemorySpace(unsigned int pci0Dev3Base,
+			       unsigned int pci0Dev3Length);
+void pci1MapDevice3MemorySpace(unsigned int pci1Dev3Base,
+			       unsigned int pci1Dev3Length);
+void pci0MapBootDeviceMemorySpace(unsigned int pci0DevBootBase,
+				  unsigned int pci0DevBootLength);
+void pci1MapBootDeviceMemorySpace(unsigned int pci1DevBootBase,
+				  unsigned int pci1DevBootLength);
+void pci0MapP2pMem0Space(unsigned int pci0P2pMem0Base,
+			 unsigned int pci0P2pMem0Length);
+void pci1MapP2pMem0Space(unsigned int pci1P2pMem0Base,
+			 unsigned int pci1P2pMem0Length);
+void pci0MapP2pMem1Space(unsigned int pci0P2pMem1Base,
+			 unsigned int pci0P2pMem1Length);
+void pci1MapP2pMem1Space(unsigned int pci1P2pMem1Base,
+			 unsigned int pci1P2pMem1Length);
+void pci0MapP2pIoSpace(unsigned int pci0P2pIoBase,
+		       unsigned int pci0P2pIoLength);
+void pci1MapP2pIoSpace(unsigned int pci1P2pIoBase,
+		       unsigned int pci1P2pIoLength);
+
+void pci0MapCPUspace(unsigned int pci0CpuBase, unsigned int pci0CpuLengs);
+void pci1MapCPUspace(unsigned int pci1CpuBase, unsigned int pci1CpuLengs);
+#endif
+
+/* PCI region options */
+
+bool  pciSetRegionFeatures(PCI_HOST host, PCI_ACCESS_REGIONS region,
+	unsigned int features, unsigned int baseAddress,
+	unsigned int regionLength);
+
+void  pciDisableAccessRegion(PCI_HOST host, PCI_ACCESS_REGIONS region);
+
+/* PCI arbiter */
+
+bool pciArbiterEnable(PCI_HOST host);
+bool pciArbiterDisable(PCI_HOST host);
+bool pciSetArbiterAgentsPriority(PCI_HOST host, PCI_AGENT_PRIO internalAgent,
+				  PCI_AGENT_PRIO externalAgent0,
+				  PCI_AGENT_PRIO externalAgent1,
+				  PCI_AGENT_PRIO externalAgent2,
+				  PCI_AGENT_PRIO externalAgent3,
+				  PCI_AGENT_PRIO externalAgent4,
+				  PCI_AGENT_PRIO externalAgent5);
+bool pciSetArbiterAgentsPriority(PCI_HOST host, PCI_AGENT_PRIO internalAgent,
+				  PCI_AGENT_PRIO externalAgent0,
+				  PCI_AGENT_PRIO externalAgent1,
+				  PCI_AGENT_PRIO externalAgent2,
+				  PCI_AGENT_PRIO externalAgent3,
+				  PCI_AGENT_PRIO externalAgent4,
+				  PCI_AGENT_PRIO externalAgent5);
+bool pciParkingDisable(PCI_HOST host, PCI_AGENT_PARK internalAgent,
+			PCI_AGENT_PARK externalAgent0,
+			PCI_AGENT_PARK externalAgent1,
+			PCI_AGENT_PARK externalAgent2,
+			PCI_AGENT_PARK externalAgent3,
+			PCI_AGENT_PARK externalAgent4,
+			PCI_AGENT_PARK externalAgent5);
+bool pciEnableBrokenAgentDetection(PCI_HOST host, unsigned char brokenValue);
+bool pciEnableBrokenAgentDetection(PCI_HOST host, unsigned char brokenValue);
+
+/* PCI-to-PCI (P2P) */
+
+bool pciP2PConfig(PCI_HOST host,
+		  unsigned int SecondBusLow,unsigned int SecondBusHigh,
+		  unsigned int busNum,unsigned int devNum);
+/* PCI Cache-coherency */
+
+bool pciSetRegionSnoopMode(PCI_HOST host, PCI_SNOOP_REGION region,
+			    PCI_SNOOP_TYPE snoopType,
+			    unsigned int baseAddress,
+			    unsigned int regionLength);
+
+PCI_DEVICE * pciFindDevice(unsigned short ven, unsigned short dev);
+
+#endif /* __INCpcih */
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index cdab286578..98429c033d 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -296,8 +296,6 @@ static int pati_pci_eeprom_read(unsigned short offset, unsigned long addr, unsig
 	return 0;
 }
 
-
-
 /******************************************************************************
  * PCI Bridge Registers Dump
 *******************************************************************************/
diff --git a/board/mpl/pati/plx9056.h b/board/mpl/pati/plx9056.h
index 763a79378a..963857f58d 100644
--- a/board/mpl/pati/plx9056.h
+++ b/board/mpl/pati/plx9056.h
@@ -1,114 +1,114 @@
-/*

- * (C) Copyright 2003

- * Denis Peter, d.peter@mpl.ch

- * See file CREDITS for list of people who contributed to this

- * project.

- *

- * This program is free software; you can redistribute it and/or

- * modify it under the terms of the GNU General Public License as

- * published by the Free Software Foundation; either version 2 of

- * the License, or (at your option) any later version.

- *

- * This program is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with this program; if not, write to the Free Software

- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

- * MA 02111-1307 USA

- */

-/* PLX9096 register definitions

-*/

-#ifndef __PLX9056_H_

-#define __PLX9056_H_	1

-

-#include <pci.h>

-

-#ifdef PLX9056_LOC

-#define LOCAL_OFFSET					0x080

-/* PCI Config regs */

-#else

-#define LOCAL_OFFSET					0x000

-#endif

-

-#define PCI9056_VENDOR_ID            PCI_VENDOR_ID

-//#define PCI9656_DEVICE_ID            PCI_DEVICE_ID

-#define PCI9056_COMMAND              PCI_COMMAND

-//#define PCI9656_STATUS               PCI_STATUS

-#define PCI9056_REVISION             PCI_REVISION_ID

-

-#define PCI9056_CACHE_SIZE           PCI_CACHE_LINE_SIZE

-#define PCI9056_RTR_BASE             PCI_BASE_ADDRESS_0

-#define PCI9056_RTR_IO_BASE          PCI_BASE_ADDRESS_1

-#define PCI9056_LOCAL_BASE0          PCI_BASE_ADDRESS_2

-#define PCI9056_LOCAL_BASE1          PCI_BASE_ADDRESS_3

-#define PCI9056_UNUSED_BASE1         PCI_BASE_ADDRESS_4

-#define PCI9056_UNUSED_BASE2         PCI_BASE_ADDRESS_5

-#define PCI9056_CIS_PTR              PCI_CARDBUS_CIS

-#define PCI9056_SUB_ID               PCI_SUBSYSTEM_VENDOR_ID

-#define PCI9056_EXP_ROM_BASE         PCI_ROM_ADDRESS

-#define PCI9056_CAP_PTR              PCI_CAPABILITY_LIST

-#define PCI9056_INT_LINE             PCI_INTERRUPT_LINE

-

-#if defined(PLX9056_LOC)

-    #define PCI9056_PM_CAP_ID            0x180

-    #define PCI9056_PM_CSR               0x184

-    #define PCI9056_HS_CAP_ID            0x188

-    #define PCI9056_VPD_CAP_ID           0x18C

-    #define PCI9056_VPD_DATA             0x190

-#endif

-

-

-

-#define PCI_DEVICE_ID_PLX9056		0x9056

-

-/* Local Configuration Registers Accessible via the PCI Base address + Variable */

-#define PCI9056_SPACE0_RANGE         (0x000 + LOCAL_OFFSET)

-#define PCI9056_SPACE0_REMAP         (0x004 + LOCAL_OFFSET)

-#define PCI9056_LOCAL_DMA_ARBIT      (0x008 + LOCAL_OFFSET)

-#define PCI9056_ENDIAN_DESC          (0x00c + LOCAL_OFFSET)

-#define PCI9056_EXP_ROM_RANGE        (0x010 + LOCAL_OFFSET)

-#define PCI9056_EXP_ROM_REMAP        (0x014 + LOCAL_OFFSET)

-#define PCI9056_SPACE0_ROM_DESC      (0x018 + LOCAL_OFFSET)

-#define PCI9056_DM_RANGE             (0x01c + LOCAL_OFFSET)

-#define PCI9056_DM_MEM_BASE          (0x020 + LOCAL_OFFSET)

-#define PCI9056_DM_IO_BASE           (0x024 + LOCAL_OFFSET)

-#define PCI9056_DM_PCI_MEM_REMAP     (0x028 + LOCAL_OFFSET)

-#define PCI9056_DM_PCI_IO_CONFIG     (0x02c + LOCAL_OFFSET)

-#define PCI9056_SPACE1_RANGE         (0x0f0 + LOCAL_OFFSET)

-#define PCI9056_SPACE1_REMAP         (0x0f4 + LOCAL_OFFSET)

-#define PCI9056_SPACE1_DESC          (0x0f8 + LOCAL_OFFSET)

-#define PCI9056_DM_DAC               (0x0fc + LOCAL_OFFSET)

-

-#ifdef PLX9056_LOC

-#define PCI9056_ARBITER_CTRL         0x1A0

-#define PCI9056_ABORT_ADDRESS        0x1A4

-#endif

-

-/* Runtime registers  PCI Address + LOCAL_OFFSET */

-#ifdef PLX9056_LOC

-#define PCI9056_MAILBOX0				0x0C0

-#define PCI9056_MAILBOX1				0x0C4

-#else

-#define PCI9056_MAILBOX0				0x078

-#define PCI9056_MAILBOX1				0x07c

-#endif

-

-#define PCI9056_MAILBOX2				(0x048 + LOCAL_OFFSET)

-#define PCI9056_MAILBOX3				(0x04c + LOCAL_OFFSET)

-#define PCI9056_MAILBOX4				(0x050 + LOCAL_OFFSET)

-#define PCI9056_MAILBOX5				(0x054 + LOCAL_OFFSET)

-#define PCI9056_MAILBOX6				(0x058 + LOCAL_OFFSET)

-#define PCI9056_MAILBOX7				(0x05c + LOCAL_OFFSET)

-#define PCI9056_PCI_TO_LOC_DBELL		(0x060 + LOCAL_OFFSET)

-#define PCI9056_LOC_TO_PCI_DBELL		(0x064 + LOCAL_OFFSET)

-#define PCI9056_INT_CTRL_STAT			(0x068 + LOCAL_OFFSET)

-#define PCI9056_EEPROM_CTRL_STAT		(0x06c + LOCAL_OFFSET)

-#define PCI9056_PERM_VENDOR_ID		(0x070 + LOCAL_OFFSET)

-#define PCI9056_REVISION_ID			(0x074 + LOCAL_OFFSET)

-

-

-#endif /* #ifndef __PLX9056_H_ */

-

+/*
+ * (C) Copyright 2003
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* PLX9096 register definitions
+*/
+#ifndef __PLX9056_H_
+#define __PLX9056_H_	1
+
+#include <pci.h>
+
+#ifdef PLX9056_LOC
+#define LOCAL_OFFSET					0x080
+/* PCI Config regs */
+#else
+#define LOCAL_OFFSET					0x000
+#endif
+
+#define PCI9056_VENDOR_ID            PCI_VENDOR_ID
+/*#define PCI9656_DEVICE_ID            PCI_DEVICE_ID */
+#define PCI9056_COMMAND              PCI_COMMAND
+/*#define PCI9656_STATUS               PCI_STATUS */
+#define PCI9056_REVISION             PCI_REVISION_ID
+
+#define PCI9056_CACHE_SIZE           PCI_CACHE_LINE_SIZE
+#define PCI9056_RTR_BASE             PCI_BASE_ADDRESS_0
+#define PCI9056_RTR_IO_BASE          PCI_BASE_ADDRESS_1
+#define PCI9056_LOCAL_BASE0          PCI_BASE_ADDRESS_2
+#define PCI9056_LOCAL_BASE1          PCI_BASE_ADDRESS_3
+#define PCI9056_UNUSED_BASE1         PCI_BASE_ADDRESS_4
+#define PCI9056_UNUSED_BASE2         PCI_BASE_ADDRESS_5
+#define PCI9056_CIS_PTR              PCI_CARDBUS_CIS
+#define PCI9056_SUB_ID               PCI_SUBSYSTEM_VENDOR_ID
+#define PCI9056_EXP_ROM_BASE         PCI_ROM_ADDRESS
+#define PCI9056_CAP_PTR              PCI_CAPABILITY_LIST
+#define PCI9056_INT_LINE             PCI_INTERRUPT_LINE
+
+#if defined(PLX9056_LOC)
+    #define PCI9056_PM_CAP_ID            0x180
+    #define PCI9056_PM_CSR               0x184
+    #define PCI9056_HS_CAP_ID            0x188
+    #define PCI9056_VPD_CAP_ID           0x18C
+    #define PCI9056_VPD_DATA             0x190
+#endif
+
+
+
+#define PCI_DEVICE_ID_PLX9056		0x9056
+
+/* Local Configuration Registers Accessible via the PCI Base address + Variable */
+#define PCI9056_SPACE0_RANGE         (0x000 + LOCAL_OFFSET)
+#define PCI9056_SPACE0_REMAP         (0x004 + LOCAL_OFFSET)
+#define PCI9056_LOCAL_DMA_ARBIT      (0x008 + LOCAL_OFFSET)
+#define PCI9056_ENDIAN_DESC          (0x00c + LOCAL_OFFSET)
+#define PCI9056_EXP_ROM_RANGE        (0x010 + LOCAL_OFFSET)
+#define PCI9056_EXP_ROM_REMAP        (0x014 + LOCAL_OFFSET)
+#define PCI9056_SPACE0_ROM_DESC      (0x018 + LOCAL_OFFSET)
+#define PCI9056_DM_RANGE             (0x01c + LOCAL_OFFSET)
+#define PCI9056_DM_MEM_BASE          (0x020 + LOCAL_OFFSET)
+#define PCI9056_DM_IO_BASE           (0x024 + LOCAL_OFFSET)
+#define PCI9056_DM_PCI_MEM_REMAP     (0x028 + LOCAL_OFFSET)
+#define PCI9056_DM_PCI_IO_CONFIG     (0x02c + LOCAL_OFFSET)
+#define PCI9056_SPACE1_RANGE         (0x0f0 + LOCAL_OFFSET)
+#define PCI9056_SPACE1_REMAP         (0x0f4 + LOCAL_OFFSET)
+#define PCI9056_SPACE1_DESC          (0x0f8 + LOCAL_OFFSET)
+#define PCI9056_DM_DAC               (0x0fc + LOCAL_OFFSET)
+
+#ifdef PLX9056_LOC
+#define PCI9056_ARBITER_CTRL         0x1A0
+#define PCI9056_ABORT_ADDRESS        0x1A4
+#endif
+
+/* Runtime registers  PCI Address + LOCAL_OFFSET */
+#ifdef PLX9056_LOC
+#define PCI9056_MAILBOX0				0x0C0
+#define PCI9056_MAILBOX1				0x0C4
+#else
+#define PCI9056_MAILBOX0				0x078
+#define PCI9056_MAILBOX1				0x07c
+#endif
+
+#define PCI9056_MAILBOX2				(0x048 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX3				(0x04c + LOCAL_OFFSET)
+#define PCI9056_MAILBOX4				(0x050 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX5				(0x054 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX6				(0x058 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX7				(0x05c + LOCAL_OFFSET)
+#define PCI9056_PCI_TO_LOC_DBELL		(0x060 + LOCAL_OFFSET)
+#define PCI9056_LOC_TO_PCI_DBELL		(0x064 + LOCAL_OFFSET)
+#define PCI9056_INT_CTRL_STAT			(0x068 + LOCAL_OFFSET)
+#define PCI9056_EEPROM_CTRL_STAT		(0x06c + LOCAL_OFFSET)
+#define PCI9056_PERM_VENDOR_ID		(0x070 + LOCAL_OFFSET)
+#define PCI9056_REVISION_ID			(0x074 + LOCAL_OFFSET)
+
+
+#endif /* #ifndef __PLX9056_H_ */
+