board/w7o/fpga.c: make (mostly) checkpatch clean

Just reformated the code.  No attempts were made to clean up warnings
about "Use of volatile is usually wrong" or "externs should be avoided".

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 310 insertions, 303 deletions

diff --git a/board/w7o/fpga.c b/board/w7o/fpga.c
index 100bce4722..c3d3c801d7 100644
--- a/board/w7o/fpga.c
+++ b/board/w7o/fpga.c
@@ -31,349 +31,356 @@
 static void
 fpga_img_write(unsigned long *src, unsigned long len, unsigned short *daddr)
 {
-    unsigned long i;
-    volatile unsigned long val;
-    volatile unsigned short *dest = daddr;	/* volatile-bypass optimizer */
-
-    for (i = 0; i < len; i++, src++) {
-	val = *src;
-	*dest = (unsigned short)((val & 0xff000000L) >> 16);
-	*dest = (unsigned short)((val & 0x00ff0000L) >> 8);
-	*dest = (unsigned short)(val & 0x0000ff00L);
-	*dest = (unsigned short)((val & 0x000000ffL) << 8);
-    }
-
-    /* Terminate programming with 4 C clocks */
-    dest = daddr;
-    val = *(unsigned short *)dest;
-    val = *(unsigned short *)dest;
-    val = *(unsigned short *)dest;
-    val = *(unsigned short *)dest;
+	unsigned long i;
+	volatile unsigned long val;
+	volatile unsigned short *dest = daddr;	/* volatile-bypass optimizer */
+
+	for (i = 0; i < len; i++, src++) {
+		val = *src;
+		*dest = (unsigned short) ((val & 0xff000000L) >> 16);
+		*dest = (unsigned short) ((val & 0x00ff0000L) >> 8);
+		*dest = (unsigned short) (val & 0x0000ff00L);
+		*dest = (unsigned short) ((val & 0x000000ffL) << 8);
+	}
+
+	/* Terminate programming with 4 C clocks */
+	dest = daddr;
+	val = *(unsigned short *) dest;
+	val = *(unsigned short *) dest;
+	val = *(unsigned short *) dest;
+	val = *(unsigned short *) dest;
 
 }
 
 
 int
-fpgaDownload(unsigned char *saddr,
-	     unsigned long size,
-	     unsigned short *daddr)
+fpgaDownload(unsigned char *saddr, unsigned long size, unsigned short *daddr)
 {
-    int i;					/* index, intr disable flag */
-    int start;					/* timer */
-    unsigned long greg, grego;			/* GPIO & output register */
-    unsigned long length;			/* image size in words */
-    unsigned long *source;			/* image source addr */
-    unsigned short *dest;			/* destination FPGA addr */
-    volatile unsigned short *ndest;		/* temp dest FPGA addr */
-    volatile unsigned short val;		/* temp val */
-    unsigned long cnfg = GPIO_XCV_CNFG;		/* FPGA CNFG */
-    unsigned long eirq = GPIO_XCV_IRQ;
-    int retval = -1;				/* Function return value */
-
-    /* Setup some basic values */
-    length = (size / 4) + 1;			/* size in words, rounding UP
-						    is OK */
-    source = (unsigned long *)saddr;
-    dest = (unsigned short *)daddr;
-
-    /* Get DCR output register */
-    grego = in32(PPC405GP_GPIO0_OR);
-
-    /* Reset FPGA */
-    grego &= ~GPIO_XCV_PROG;			/* PROG line low */
-    out32(PPC405GP_GPIO0_OR, grego);
-
-    /* Setup timeout timer */
-    start = get_timer(0);
-
-    /* Wait for FPGA init line */
-    while(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
-	/* Check for timeout - 100us max, so use 3ms */
-	if (get_timer(start) > 3) {
-	    printf("     failed to start init.\n");
-	    log_warn(ERR_XINIT0);		/* Don't halt */
-
-	    /* Reset line stays low */
-	    goto done;				/* I like gotos... */
+	int i;			/* index, intr disable flag */
+	int start;		/* timer */
+	unsigned long greg, grego;	/* GPIO & output register */
+	unsigned long length;	/* image size in words */
+	unsigned long *source;	/* image source addr */
+	unsigned short *dest;	/* destination FPGA addr */
+	volatile unsigned short *ndest;	/* temp dest FPGA addr */
+	volatile unsigned short val;	/* temp val */
+	unsigned long cnfg = GPIO_XCV_CNFG;	/* FPGA CNFG */
+	unsigned long eirq = GPIO_XCV_IRQ;
+	int retval = -1;	/* Function return value */
+
+	/* Setup some basic values */
+	length = (size / 4) + 1;	/* size in words, rounding UP
+					   is OK */
+	source = (unsigned long *) saddr;
+	dest = (unsigned short *) daddr;
+
+	/* Get DCR output register */
+	grego = in32(PPC405GP_GPIO0_OR);
+
+	/* Reset FPGA */
+	grego &= ~GPIO_XCV_PROG;	/* PROG line low */
+	out32(PPC405GP_GPIO0_OR, grego);
+
+	/* Setup timeout timer */
+	start = get_timer(0);
+
+	/* Wait for FPGA init line to go low */
+	while (in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) {
+		/* Check for timeout - 100us max, so use 3ms */
+		if (get_timer(start) > 3) {
+			printf("     failed to start init.\n");
+			log_warn(ERR_XINIT0);	/* Don't halt */
+
+			/* Reset line stays low */
+			goto done;	/* I like gotos... */
+		}
 	}
-    }
 
-    /* Unreset FPGA */
-    grego |= GPIO_XCV_PROG;			/* PROG line high */
-    out32(PPC405GP_GPIO0_OR, grego);
+	/* Unreset FPGA */
+	grego |= GPIO_XCV_PROG;	/* PROG line high */
+	out32(PPC405GP_GPIO0_OR, grego);
+
+	/* Wait for FPGA end of init period = init line go hi  */
+	while (!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) {
 
-    /* Wait for FPGA end of init period .  */
-    while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
+		/* Check for timeout */
+		if (get_timer(start) > 3) {
+			printf("     failed to exit init.\n");
+			log_warn(ERR_XINIT1);
 
-	/* Check for timeout */
-	if (get_timer(start) > 3) {
-	    printf("     failed to exit init.\n");
-	    log_warn(ERR_XINIT1);
+			/* Reset FPGA */
+			grego &= ~GPIO_XCV_PROG;	/* PROG line low */
+			out32(PPC405GP_GPIO0_OR, grego);
 
-	    /* Reset FPGA */
-	    grego &= ~GPIO_XCV_PROG;		/* PROG line low */
-	    out32(PPC405GP_GPIO0_OR, grego);
+			goto done;
+		}
+	}
 
-	    goto done;
+	/* Now program FPGA ... */
+	ndest = dest;
+	for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
+		/* Toggle IRQ/GPIO */
+		greg = mfdcr(CPC0_CR0);	/* get chip ctrl register */
+		greg |= eirq;	/* toggle irq/gpio */
+		mtdcr(CPC0_CR0, greg);	/*  ... just do it */
+
+		/* turn on open drain for CNFG */
+		greg = in32(PPC405GP_GPIO0_ODR); /* get open drain register */
+		greg |= cnfg;	/* CNFG open drain */
+		out32(PPC405GP_GPIO0_ODR, greg); /*  .. just do it */
+
+		/* Turn output enable on for CNFG */
+		greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
+		greg |= cnfg;	/* CNFG tristate inactive */
+		out32(PPC405GP_GPIO0_TCR, greg); /*  ... just do it */
+
+		/* Setup FPGA for programming */
+		grego &= ~cnfg;	/* CONFIG line low */
+		out32(PPC405GP_GPIO0_OR, grego);
+
+		/*
+		 * Program the FPGA
+		 */
+		printf("\n       destination: 0x%lx ", (unsigned long) ndest);
+
+		fpga_img_write(source, length, (unsigned short *) ndest);
+
+		/* Done programming */
+		grego |= cnfg;	/* CONFIG line high */
+		out32(PPC405GP_GPIO0_OR, grego);
+
+		/* Turn output enable OFF for CNFG */
+		greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
+		greg &= ~cnfg;	/* CNFG tristate inactive */
+		out32(PPC405GP_GPIO0_TCR, greg); /*  ... just do it */
+
+		/* Toggle IRQ/GPIO */
+		greg = mfdcr(CPC0_CR0);	/* get chip ctrl register */
+		greg &= ~eirq;	/* toggle irq/gpio */
+		mtdcr(CPC0_CR0, greg);	/*  ... just do it */
+
+		/* XXX - Next FPGA addr */
+		ndest = (unsigned short *) ((char *) ndest + 0x00100000L);
+		cnfg >>= 1;	/* XXX - Next  */
+		eirq >>= 1;
 	}
-    }
-
-    /* Now program FPGA ... */
-    ndest = dest;
-    for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
-	/* Toggle IRQ/GPIO */
-	greg = mfdcr(CPC0_CR0);			/* get chip ctrl register */
-	greg |= eirq;				/* toggle irq/gpio */
-	mtdcr(CPC0_CR0, greg);			/*  ... just do it */
-
-	/* turn on open drain for CNFG */
-	greg = in32(PPC405GP_GPIO0_ODR);	/* get open drain register */
-	greg |= cnfg;				/* CNFG open drain */
-	out32(PPC405GP_GPIO0_ODR, greg);	/*  .. just do it */
-
-	/* Turn output enable on for CNFG */
-	greg = in32(PPC405GP_GPIO0_TCR);	/* get tristate register */
-	greg |= cnfg;				/* CNFG tristate inactive */
-	out32(PPC405GP_GPIO0_TCR, greg);	/*  ... just do it */
-
-	/* Setup FPGA for programming */
-	grego &= ~cnfg;				/* CONFIG line low */
-	out32(PPC405GP_GPIO0_OR, grego);
 
-	/*
-	 * Program the FPGA
-	 */
-	printf("\n       destination: 0x%lx ", (unsigned long)ndest);
+	/* Terminate programming with 4 C clocks */
+	ndest = dest;
+	for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
+		val = *ndest;
+		val = *ndest;
+		val = *ndest;
+		val = *ndest;
+		ndest = (unsigned short *) ((char *) ndest + 0x00100000L);
+	}
 
-	fpga_img_write(source,  length,  (unsigned short *)ndest);
+	/* Setup timer */
+	start = get_timer(0);
 
-	/* Done programming */
-	grego |= cnfg;				/* CONFIG line high */
-	out32(PPC405GP_GPIO0_OR, grego);
+	/* Wait for FPGA end of programming period = Test DONE low  */
+	while (!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) {
 
-	/* Turn output enable OFF for CNFG */
-	greg = in32(PPC405GP_GPIO0_TCR);	/* get tristate register */
-	greg &= ~cnfg;				/* CNFG tristate inactive */
-	out32(PPC405GP_GPIO0_TCR, greg);	/*  ... just do it */
-
-	/* Toggle IRQ/GPIO */
-	greg = mfdcr(CPC0_CR0);			/* get chip ctrl register */
-	greg &= ~eirq;				/* toggle irq/gpio */
-	mtdcr(CPC0_CR0, greg);			/*  ... just do it */
-
-	ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */
-	cnfg >>= 1;				/* XXX - Next  */
-	eirq >>= 1;
-    }
-
-    /* Terminate programming with 4 C clocks */
-    ndest = dest;
-    for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
-	val = *ndest;
-	val = *ndest;
-	val = *ndest;
-	val = *ndest;
-	ndest = (unsigned short *)((char *)ndest + 0x00100000L);
-    }
-
-    /* Setup timer */
-    start = get_timer(0);
-
-    /* Wait for FPGA end of programming period .  */
-    while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
-
-	/* Check for timeout */
-	if (get_timer(start) > 3) {
-	    printf("     done failed to come high.\n");
-	    log_warn(ERR_XDONE1);
-
-	    /* Reset FPGA */
-	    grego &= ~GPIO_XCV_PROG;		/* PROG line low */
-	    out32(PPC405GP_GPIO0_OR, grego);
-
-	    goto done;
+		/* Check for timeout */
+		if (get_timer(start) > 3) {
+			printf("     done failed to come high.\n");
+			log_warn(ERR_XDONE1);
+
+			/* Reset FPGA */
+			grego &= ~GPIO_XCV_PROG;	/* PROG line low */
+			out32(PPC405GP_GPIO0_OR, grego);
+
+			goto done;
+		}
 	}
-    }
 
-    printf("\n       FPGA load succeeded\n");
-    retval = 0;					/* Program OK */
+	printf("\n       FPGA load succeeded\n");
+	retval = 0;		/* Program OK */
 
 done:
-    return retval;
+	return retval;
 }
 
 /* FPGA image is stored in flash */
-extern flash_info_t    flash_info[];
+extern flash_info_t flash_info[];
 
 int init_fpga(void)
 {
-    unsigned int i,j,ptr;			/* General purpose */
-    unsigned char bufchar;			/* General purpose character */
-    unsigned char *buf;				/* Start of image pointer */
-    unsigned long len;				/* Length of image */
-    unsigned char *fn_buf;			/* Start of filename string */
-    unsigned int fn_len;			/* Length of filename string */
-    unsigned char *xcv_buf;			/* Pointer to start of image */
-    unsigned long xcv_len;			/* Length of image */
-    unsigned long crc;				/* 30bit crc in image */
-    unsigned long calc_crc;			/* Calc'd 30bit crc */
-    int retval = -1;
-
-    /* Tell the world what we are doing */
-    printf("FPGA:  ");
-
-    /*
-     * Get address of first sector where the FPGA
-     * image is stored.
-     */
-    buf = (unsigned char *)flash_info[1].start[0];
-
-    /*
-     * Get the stored image's CRC & length.
-     */
-    crc = *(unsigned long *)(buf+4);		/* CRC is first long word */
-    len = *(unsigned long *)(buf+8);		/* Image len is next long */
-
-    /* Pedantic */
-    if ((len < 0x133A4) || (len > 0x80000))
-	goto bad_image;
-
-    /*
-     * Get the file name pointer and length.
-     */
-    fn_len = (*(unsigned short *)(buf+12) & 0xff); /* filename length
-						      is next short */
-    fn_buf = buf + 14;
-
-    /*
-     * Get the FPGA image pointer and length length.
-     */
-    xcv_buf = fn_buf + fn_len;			/* pointer to fpga image */
-    xcv_len = len - 14 - fn_len;		/* fpga image length */
-
-    /* Check for uninitialized FLASH */
-    if ((strncmp((char *)buf, "w7o", 3)!=0) || (len > 0x0007ffffL) || (len == 0))
-	goto bad_image;
-
-    /*
-     * Calculate and Check the image's CRC.
-     */
-    calc_crc = crc32(0, xcv_buf, xcv_len);
-    if (crc != calc_crc) {
-	printf("\nfailed - bad CRC\n");
-	goto done;
-    }
-
-    /* Output the file name */
-    printf("file name  : ");
-    for (i=0;i<fn_len;i++) {
-	bufchar = fn_buf[+i];
-	if (bufchar<' ' || bufchar>'~') bufchar = '.';
-	putc(bufchar);
-    }
-
-    /*
-     * find rest of display data
-     */
-    ptr = 15;					/* Offset to ncd filename
-						   length in fpga image */
-    j = xcv_buf[ptr];				/* Get len of ncd filename */
-    if (j > 32) goto bad_image;
-    ptr = ptr + j + 3;				/* skip ncd filename string +
-						   3 bytes more bytes */
-
-    /*
-     * output target device string
-     */
-    j = xcv_buf[ptr++] - 1;			/* len of targ str less term */
-    if (j > 32) goto bad_image;
-    printf("\n       target     : ");
-    for (i = 0; i < j; i++) {
-	bufchar = (xcv_buf[ptr++]);
-	if (bufchar<' ' || bufchar>'~') bufchar = '.';
-	putc(bufchar);
-    }
-
-    /*
-     * output compilation date string and time string
-     */
-    ptr += 3;					/* skip 2 bytes */
-    printf("\n       synth time : ");
-    j = (xcv_buf[ptr++] - 1);			/* len of date str less term */
-    if (j > 32) goto bad_image;
-    for (i = 0; i < j; i++) {
-	bufchar = (xcv_buf[ptr++]);
-	if (bufchar<' ' || bufchar>'~') bufchar = '.';
-	putc(bufchar);
-    }
-
-    ptr += 3;					/* Skip 2 bytes */
-    printf(" - ");
-    j = (xcv_buf[ptr++] - 1);			/* slen = targ dev str len */
-    if (j > 32) goto bad_image;
-    for (i = 0; i < j; i++) {
-	bufchar = (xcv_buf[ptr++]);
-	if (bufchar<' ' || bufchar>'~') bufchar = '.';
-	putc(bufchar);
-    }
-
-    /*
-     * output crc and length strings
-     */
-    printf("\n       len & crc  : 0x%lx  0x%lx", len, crc);
-
-    /*
-     * Program the FPGA.
-     */
-    retval = fpgaDownload((unsigned char*)xcv_buf, xcv_len,
-			  (unsigned short *)0xfd000000L);
-    return retval;
+	unsigned int i, j, ptr;	/* General purpose */
+	unsigned char bufchar;	/* General purpose character */
+	unsigned char *buf;	/* Start of image pointer */
+	unsigned long len;	/* Length of image */
+	unsigned char *fn_buf;	/* Start of filename string */
+	unsigned int fn_len;	/* Length of filename string */
+	unsigned char *xcv_buf;	/* Pointer to start of image */
+	unsigned long xcv_len;	/* Length of image */
+	unsigned long crc;	/* 30bit crc in image */
+	unsigned long calc_crc;	/* Calc'd 30bit crc */
+	int retval = -1;
+
+	/* Tell the world what we are doing */
+	printf("FPGA:  ");
+
+	/*
+	 * Get address of first sector where the FPGA
+	 * image is stored.
+	 */
+	buf = (unsigned char *) flash_info[1].start[0];
+
+	/*
+	 * Get the stored image's CRC & length.
+	 */
+	crc = *(unsigned long *) (buf + 4);	/* CRC is first long word */
+	len = *(unsigned long *) (buf + 8);	/* Image len is next long */
+
+	/* Pedantic */
+	if ((len < 0x133A4) || (len > 0x80000))
+		goto bad_image;
+
+	/*
+	 * Get the file name pointer and length.
+	 * filename length is next short
+	 */
+	fn_len = (*(unsigned short *) (buf + 12) & 0xff);
+	fn_buf = buf + 14;
+
+	/*
+	 * Get the FPGA image pointer and length length.
+	 */
+	xcv_buf = fn_buf + fn_len;	/* pointer to fpga image */
+	xcv_len = len - 14 - fn_len;	/* fpga image length */
+
+	/* Check for uninitialized FLASH */
+	if ((strncmp((char *) buf, "w7o", 3) != 0) || (len > 0x0007ffffL)
+	    || (len == 0))
+		goto bad_image;
+
+	/*
+	 * Calculate and Check the image's CRC.
+	 */
+	calc_crc = crc32(0, xcv_buf, xcv_len);
+	if (crc != calc_crc) {
+		printf("\nfailed - bad CRC\n");
+		goto done;
+	}
+
+	/* Output the file name */
+	printf("file name  : ");
+	for (i = 0; i < fn_len; i++) {
+		bufchar = fn_buf[+i];
+		if (bufchar < ' ' || bufchar > '~')
+			bufchar = '.';
+		putc(bufchar);
+	}
+
+	/*
+	 * find rest of display data
+	 */
+	ptr = 15;		/* Offset to ncd filename
+				   length in fpga image */
+	j = xcv_buf[ptr];	/* Get len of ncd filename */
+	if (j > 32)
+		goto bad_image;
+	ptr = ptr + j + 3;	/* skip ncd filename string +
+				   3 bytes more bytes */
+
+	/*
+	 * output target device string
+	 */
+	j = xcv_buf[ptr++] - 1;	/* len of targ str less term */
+	if (j > 32)
+		goto bad_image;
+	printf("\n       target     : ");
+	for (i = 0; i < j; i++) {
+		bufchar = (xcv_buf[ptr++]);
+		if (bufchar < ' ' || bufchar > '~')
+			bufchar = '.';
+		putc(bufchar);
+	}
+
+	/*
+	 * output compilation date string and time string
+	 */
+	ptr += 3;		/* skip 2 bytes */
+	printf("\n       synth time : ");
+	j = (xcv_buf[ptr++] - 1);	/* len of date str less term */
+	if (j > 32)
+		goto bad_image;
+	for (i = 0; i < j; i++) {
+		bufchar = (xcv_buf[ptr++]);
+		if (bufchar < ' ' || bufchar > '~')
+			bufchar = '.';
+		putc(bufchar);
+	}
+
+	ptr += 3;		/* Skip 2 bytes */
+	printf(" - ");
+	j = (xcv_buf[ptr++] - 1);	/* slen = targ dev str len */
+	if (j > 32)
+		goto bad_image;
+	for (i = 0; i < j; i++) {
+		bufchar = (xcv_buf[ptr++]);
+		if (bufchar < ' ' || bufchar > '~')
+			bufchar = '.';
+		putc(bufchar);
+	}
+
+	/*
+	 * output crc and length strings
+	 */
+	printf("\n       len & crc  : 0x%lx  0x%lx", len, crc);
+
+	/*
+	 * Program the FPGA.
+	 */
+	retval = fpgaDownload((unsigned char *) xcv_buf, xcv_len,
+			      (unsigned short *) 0xfd000000L);
+	return retval;
 
 bad_image:
-    printf("\n       BAD FPGA image format @ %lx\n", flash_info[1].start[0]);
-    log_warn(ERR_XIMAGE);
+	printf("\n       BAD FPGA image format @ %lx\n",
+	       flash_info[1].start[0]);
+	log_warn(ERR_XIMAGE);
 done:
-    return retval;
+	return retval;
 }
 
 void test_fpga(unsigned short *daddr)
 {
-    int i;
-    volatile unsigned short *ndest = daddr;
+	int i;
+	volatile unsigned short *ndest = daddr;
 
-    for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
+	for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
 #if defined(CONFIG_W7OLMG)
-	ndest[0x7e] = 0x55aa;
-	if (ndest[0x7e] != 0x55aa)
-	    log_warn(ERR_XRW1 + i);
-	ndest[0x7e] = 0xaa55;
-	if (ndest[0x7e] != 0xaa55)
-	    log_warn(ERR_XRW1 + i);
-	ndest[0x7e] = 0xc318;
-	if (ndest[0x7e] != 0xc318)
-	    log_warn(ERR_XRW1 + i);
+		ndest[0x7e] = 0x55aa;
+		if (ndest[0x7e] != 0x55aa)
+			log_warn(ERR_XRW1 + i);
+		ndest[0x7e] = 0xaa55;
+		if (ndest[0x7e] != 0xaa55)
+			log_warn(ERR_XRW1 + i);
+		ndest[0x7e] = 0xc318;
+		if (ndest[0x7e] != 0xc318)
+			log_warn(ERR_XRW1 + i);
 
 #elif defined(CONFIG_W7OLMC)
-	ndest[0x800] = 0x55aa;
-	ndest[0x801] = 0xaa55;
-	ndest[0x802] = 0xc318;
-	ndest[0x4800] = 0x55aa;
-	ndest[0x4801] = 0xaa55;
-	ndest[0x4802] = 0xc318;
-	if ((ndest[0x800] != 0x55aa) ||
-	    (ndest[0x801] != 0xaa55) ||
-	    (ndest[0x802] != 0xc318))
-	    log_warn(ERR_XRW1 + (2 * i));       /* Auto gen error code */
-	if ((ndest[0x4800] != 0x55aa) ||
-	    (ndest[0x4801] != 0xaa55) ||
-	    (ndest[0x4802] != 0xc318))
-	    log_warn(ERR_XRW2 + (2 * i));       /* Auto gen error code */
+		ndest[0x800] = 0x55aa;
+		ndest[0x801] = 0xaa55;
+		ndest[0x802] = 0xc318;
+		ndest[0x4800] = 0x55aa;
+		ndest[0x4801] = 0xaa55;
+		ndest[0x4802] = 0xc318;
+		if ((ndest[0x800] != 0x55aa) ||
+		    (ndest[0x801] != 0xaa55) || (ndest[0x802] != 0xc318))
+			log_warn(ERR_XRW1 + (2 * i)); /* Auto gen error code */
+		if ((ndest[0x4800] != 0x55aa) ||
+		    (ndest[0x4801] != 0xaa55) || (ndest[0x4802] != 0xc318))
+			log_warn(ERR_XRW2 + (2 * i)); /* Auto gen error code */
 
 #else
-# error "Unknown W7O board configuration"
+#error "Unknown W7O board configuration"
 #endif
-    }
+	}
 
-    printf("       FPGA ready\n");
-    return;
+	printf("       FPGA ready\n");
+	return;
 }