arm: Remove vision2 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefano Babic <sbabic@denx.de>

1 files changed, 0 insertions, 212 deletions

diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg
deleted file mode 100644
index c74973edec..0000000000
--- a/board/ttcontrol/vision2/imximage_hynix.cfg
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * (C) Copyright 2009
- * Stefano Babic DENX Software Engineering sbabic@denx.de.
- *
- * (C) Copyright 2010
- * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/*
- * Boot Device : one of
- * spi, nand, onenand, sd
- */
-BOOT_FROM	spi
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *	Addr-type register length (1,2 or 4 bytes)
- *	Address	  absolute address of the register
- *	value	  value to be stored in the register
- */
-
-/*
- * #######################
- * ### Disable WDOG ###
- * #######################
- */
-DATA 2 0x73f98000 0x30
-
-/*
- * #######################
- * ### SET DDR Clk     ###
- * #######################
- */
-/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */
-DATA 4 0x73FD4018 0x000024C0
-
-/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */
-DATA 4 0x73FD4038 0x2010241
-
-/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */
-DATA 4 0x73fa8600 0x00000107
-/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */
-DATA 4 0x73fa8604 0x00000107
-/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
-DATA 4 0x73fa8608 0x00000187
-/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
-DATA 4 0x73fa860c 0x00000187
-/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */
-DATA 4 0x73fa8614 0x00000107
-/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */
-DATA 4 0x73fa86a8 0x00000187
-
-/*
- * #######################
- * ### Settings IOMUXC ###
- * #######################
- */
-/*
- * DDR IOMUX configuration
- * Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
- * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
- */
-DATA 4 0x73fa84b8 0x000000e7
-/* PVTC MAX (at GPC, PGR reg) */
-/* DATA 4 0x73FD8004 0x1fc00000 */
-
-/* DQM0 DS high slew rate slow */
-DATA 4 0x73fa84d4 0x000000e4
-/* DQM1 DS high slew rate slow */
-DATA 4 0x73fa84d8 0x000000e4
-/* DQM2 DS high slew rate slow */
-DATA 4 0x73fa84dc 0x000000e4
-/* DQM3 DS high slew rate slow */
-DATA 4 0x73fa84e0 0x000000e4
-
-/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */
-DATA 4 0x73fa84bc 0x000000c4
-/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */
-DATA 4 0x73fa84c0 0x000000c4
-/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */
-DATA 4 0x73fa84c4 0x000000c4
-/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */
-DATA 4 0x73fa84c8 0x000000c4
-
-/* DRAM_DATA B0 */
-DATA 4 0x73fa88a4 0x00000004
-/* DRAM_DATA B1 */
-DATA 4 0x73fa88ac 0x00000004
-/* DRAM_DATA B2 */
-DATA 4 0x73fa88b8 0x00000004
-/* DRAM_DATA B3 */
-DATA 4 0x73fa882c 0x00000004
-
-/* DRAM_DATA B0 slew rate */
-DATA 4 0x73fa8878 0x00000000
-/* DRAM_DATA B1 slew rate */
-DATA 4 0x73fa8880 0x00000000
-/* DRAM_DATA B2 slew rate */
-DATA 4 0x73fa888c 0x00000000
-/* DRAM_DATA B3 slew rate */
-DATA 4 0x73fa889c 0x00000000
-
-/*
- * #######################
- * ### Configure SDRAM ###
- * #######################
- */
-
-/* Configure CS0 */
-/* ####################### */
-
-/* ESDCTL0: Enable controller */
-DATA 4 0x83fd9000 0x83220000
-
-/* Init DRAM on CS0 */
-/* ESDSCR: Precharge command */
-DATA 4 0x83fd9014 0x04008008
-/* ESDSCR: Refresh command */
-DATA 4 0x83fd9014 0x00008010
-/* ESDSCR: Refresh command */
-DATA 4 0x83fd9014 0x00008010
-/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
-DATA 4 0x83fd9014 0x00338018
-/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
-DATA 4 0x83fd9014 0x0020801a
-/* ESDSCR */
-DATA 4 0x83fd9014 0x00008000
-
-/* ESDSCR: EMR with full Drive strength */
-/* DATA 4 0x83fd9014 0x0000801a */
-
-/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */
-DATA 4 0x83fd9000 0xC3220000
-
-/*
- * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
- *          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
- * DATA 4 0x83fd9004 0xC33574AA
- */
-/*
- * micron mDDR
- * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
- * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
- * DATA 4 0x83FD9004 0x101564a8
- */
-/*
- * hynix mDDR
- * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
- * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
- */
-DATA 4 0x83FD9004 0x704564a8
-
-/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */
-DATA 4 0x83fd9010 0x000a1700
-
-/* Configure CS1 */
-/* ####################### */
-
-/* ESDCTL1: Enable controller */
-DATA 4 0x83fd9008 0x83220000
-
-/* Init DRAM on CS1 */
-/* ESDSCR: Precharge command */
-DATA 4 0x83fd9014 0x0400800c
-/* ESDSCR: Refresh command */
-DATA 4 0x83fd9014 0x00008014
-/* ESDSCR: Refresh command */
-DATA 4 0x83fd9014 0x00008014
-/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
-DATA 4 0x83fd9014 0x0033801c
-/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
-DATA 4 0x83fd9014 0x0020801e
-/* ESDSCR */
-DATA 4 0x83fd9014 0x00008004
-
-/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */
-DATA 4 0x83fd9008 0xC3220000
-/*
- * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
- *          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
- * DATA 4 0x83fd900c 0xC33574AA
- */
-/*
- * micron mDDR
- * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
- * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
- * DATA 4 0x83FD900C 0x101564a8
- */
-/*
- * hynix mDDR
- * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
- * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
- */
-DATA 4 0x83FD900C 0x704564a8
-
-/* ESDSCR (mDRAM configuration finished) */
-DATA 4 0x83FD9014 0x00000004
-
-/* ESDSCR - clear "configuration request" bit */
-DATA 4 0x83fd9014 0x00000000