omap: gpio: Adapt board files to use generic API

This patch contains updates the sources in the board files
to use the generic API.

Signed-off-by: Sanjeev Premi <premi@ti.com>

3 files changed, 39 insertions, 39 deletions

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index e07f1b8f82..8cdceaf569 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -38,7 +38,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach-types.h>
 #ifdef CONFIG_USB_EHCI
 #include <usb.h>
@@ -116,21 +116,21 @@ int get_board_revision(void)
 {
 	int revision;
 
-	if (!omap_request_gpio(171) &&
-	    !omap_request_gpio(172) &&
-	    !omap_request_gpio(173)) {
+	if (!gpio_request(171, "") &&
+	    !gpio_request(172, "") &&
+	    !gpio_request(173, "")) {
 
-		omap_set_gpio_direction(171, 1);
-		omap_set_gpio_direction(172, 1);
-		omap_set_gpio_direction(173, 1);
+		gpio_direction_input(171);
+		gpio_direction_input(172);
+		gpio_direction_input(173);
 
-		revision = omap_get_gpio_datain(173) << 2 |
-			   omap_get_gpio_datain(172) << 1 |
-			   omap_get_gpio_datain(171);
+		revision = gpio_get_value(173) << 2 |
+			   gpio_get_value(172) << 1 |
+			   gpio_get_value(171);
 
-		omap_free_gpio(171);
-		omap_free_gpio(172);
-		omap_free_gpio(173);
+		gpio_free(171);
+		gpio_free(172);
+		gpio_free(173);
 	} else {
 		printf("Error: unable to acquire board revision GPIOs\n");
 		revision = -1;
@@ -387,7 +387,7 @@ int board_mmc_init(bd_t *bis)
 int ehci_hcd_stop(void)
 {
 	pr_debug("Resetting OMAP3 EHCI\n");
-	omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
+	gpio_set_value(GPIO_PHY_RESET, 0);
 	writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
 	/* disable USB clocks */
 	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
@@ -415,9 +415,9 @@ int ehci_hcd_init(void)
 	pr_debug("Initializing OMAP3 ECHI\n");
 
 	/* Put the PHY in RESET */
-	omap_request_gpio(GPIO_PHY_RESET);
-	omap_set_gpio_direction(GPIO_PHY_RESET, 0);
-	omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
+	gpio_request(GPIO_PHY_RESET, "");
+	gpio_direction_output(GPIO_PHY_RESET, 0);
+	gpio_set_value(GPIO_PHY_RESET, 0);
 
 	/* Hold the PHY in RESET for enough time till DIR is high */
 	/* Refer: ISSUE1 */
@@ -469,7 +469,7 @@ int ehci_hcd_init(void)
 	 * PHY is settled and ready
 	 */
 	udelay(10);
-	omap_set_gpio_dataout(GPIO_PHY_RESET, 1);
+	gpio_set_value(GPIO_PHY_RESET, 1);
 
 	hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE);
 	hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10);
@@ -508,10 +508,10 @@ int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		gpio = 4;
 		break;
 	}
-	omap_request_gpio(gpio);
-	omap_set_gpio_direction(gpio, 1);
+	gpio_request(gpio, "");
+	gpio_direction_input(gpio);
 	printf("The user button is currently ");
-	if(omap_get_gpio_datain(gpio))
+	if (gpio_get_value(gpio))
 	{
 		button = 1;
 		printf("PRESSED.\n");
@@ -522,7 +522,7 @@ int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		printf("NOT pressed.\n");
 	}
 
-	omap_free_gpio(gpio);
+	gpio_free(gpio);
 
 	return !button;
 }
diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
index f08c08ad88..1779242a01 100644
--- a/board/ti/beagle/led.c
+++ b/board/ti/beagle/led.c
@@ -22,7 +22,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 
 /* GPIO pins for the LEDs */
 #define BEAGLE_LED_USR0	150
@@ -57,10 +57,10 @@ void __led_toggle (led_id_t mask)
 		toggle_gpio = BEAGLE_LED_USR1;
 #endif
 	if (toggle_gpio) {
-		if (!omap_request_gpio(toggle_gpio)) {
-			omap_set_gpio_direction(toggle_gpio, 0);
-			state = omap_get_gpio_dataout(toggle_gpio);
-			omap_set_gpio_dataout(toggle_gpio, !state);
+		if (!gpio_request(toggle_gpio, "")) {
+			gpio_direction_output(toggle_gpio, 0);
+			state = gpio_get_value(toggle_gpio);
+			gpio_set_value(toggle_gpio, !state);
 		}
 	}
 }
@@ -69,17 +69,17 @@ void __led_set (led_id_t mask, int state)
 {
 #ifdef STATUS_LED_BIT
 	if (STATUS_LED_BIT & mask) {
-		if (!omap_request_gpio(BEAGLE_LED_USR0)) {
-			omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
-			omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
+		if (!gpio_request(BEAGLE_LED_USR0, "")) {
+			gpio_direction_output(BEAGLE_LED_USR0, 0);
+			gpio_set_value(BEAGLE_LED_USR0, state);
 		}
 	}
 #endif
 #ifdef STATUS_LED_BIT1
 	if (STATUS_LED_BIT1 & mask) {
-		if (!omap_request_gpio(BEAGLE_LED_USR1)) {
-			omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
-			omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
+		if (!gpio_request(BEAGLE_LED_USR1, "")) {
+			gpio_direction_output(BEAGLE_LED_USR1, 0);
+			gpio_set_value(BEAGLE_LED_USR1, state);
 		}
 	}
 #endif
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index e8360df960..b17c0fbadf 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -34,7 +34,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <i2c.h>
 #include <asm/mach-types.h>
 #include "evm.h"
@@ -196,21 +196,21 @@ static void reset_net_chip(void)
 		rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN2;
 	}
 
-	ret = omap_request_gpio(rst_gpio);
+	ret = gpio_request(rst_gpio, "");
 	if (ret < 0) {
 		printf("Unable to get GPIO %d\n", rst_gpio);
 		return ;
 	}
 
 	/* Configure as output */
-	omap_set_gpio_direction(rst_gpio, 0);
+	gpio_direction_output(rst_gpio, 0);
 
 	/* Send a pulse on the GPIO pin */
-	omap_set_gpio_dataout(rst_gpio, 1);
+	gpio_set_value(rst_gpio, 1);
 	udelay(1);
-	omap_set_gpio_dataout(rst_gpio, 0);
+	gpio_set_value(rst_gpio, 0);
 	udelay(1);
-	omap_set_gpio_dataout(rst_gpio, 1);
+	gpio_set_value(rst_gpio, 1);
 }
 
 int board_eth_init(bd_t *bis)