arm nomadik: rename board to nhk8815

This is an error in my side in the initial submission: nobody
calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/board/st/nhk8815/nhk8815.c b/board/st/nhk8815/nhk8815.c
new file mode 100644
index 0000000000..edf46262f5
--- /dev/null
+++ b/board/st/nhk8815/nhk8815.c
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2005
+ * STMicrolelctronics, <www.st.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+void show_boot_progress(int progress)
+{
+	printf("%i\n", progress);
+}
+#endif
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
+	gd->bd->bi_boot_params = 0x00000100;
+	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
+	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
+	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
+	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
+
+	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
+	writel(0x0000305b, REG_FSMC_BCR1);
+	writel(0x00033f33, REG_FSMC_BTR1);
+
+	icache_enable();
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	setenv("verify", "n");
+	return 0;
+}
+
+int dram_init(void)
+{
+	/* set dram bank start addr and size */
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	return 0;
+}