* Patch by Denis Peter, 8 Dec 2003

  - add support for the PATI board (MPC555)
  - add SPI support for the MPC5xx

* Patch by Anders Larsen, 08 Dec 2003:
  add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
  to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
  cleanup some redundand #defines

1 files changed, 440 insertions, 0 deletions

diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
new file mode 100644
index 0000000000..d5217724da
--- /dev/null
+++ b/board/mpl/pati/pati.h
@@ -0,0 +1,440 @@
+/*
+ * (C) Copyright 2003
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/************************************************************************
+ * MACROS and register definitions for PATI Registers
+ ************************************************************************/
+#ifndef __PATI_H_
+#define __PATI_H_	1
+
+#define PLD_PART_ID		0x0
+#define PLD_BOARD_TIMING	0x4
+#define PLD_CONF_REG1		0x8
+#define PLD_CONF_REG2		0xC
+#define PLD_CONF_RES		0x10
+
+#define SET_REG_BIT(y,x) (y<<(31-x))
+#define GET_REG_BIT(y,x) ((y>>(31-x)) & 0x1L)
+
+/* SDRAM Controller PLD_PART_ID */
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_PART3	9
+#define SDRAM_PART2	10
+#define SDRAM_PART1	11
+#define SDRAM_PART0	12
+#define SDRAM_ID3	13
+#define SDRAM_ID2	14
+#define SDRAM_ID1	19
+#define SDRAM_ID0	31
+
+#define SDRAM_PART(x)	(	\
+	(GET_REG_BIT(x,SDRAM_PART3)<<3) |\
+	(GET_REG_BIT(x,SDRAM_PART2)<<2) |\
+	(GET_REG_BIT(x,SDRAM_PART1)<<1) |\
+	(GET_REG_BIT(x,SDRAM_PART0)))
+
+#define SDRAM_ID(x)	(	\
+	(GET_REG_BIT(x,SDRAM_ID3)<<3) |\
+	(GET_REG_BIT(x,SDRAM_ID2)<<2) |\
+	(GET_REG_BIT(x,SDRAM_ID1)<<1) |\
+	(GET_REG_BIT(x,SDRAM_ID0)))
+
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_PART4	0
+#define SYSCNTR_PART3	1
+#define SYSCNTR_PART2	3
+#define SYSCNTR_PART1	4
+#define SYSCNTR_PART0	5
+#define SYSCNTR_ID4	16
+#define SYSCNTR_ID3	20
+#define SYSCNTR_ID2	28
+#define SYSCNTR_ID1	29
+#define SYSCNTR_ID0	30
+
+#define SYSCNTR_PART(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_PART4)<<4) |\
+	(GET_REG_BIT(x,SYSCNTR_PART3)<<3) |\
+	(GET_REG_BIT(x,SYSCNTR_PART2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_PART1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_PART0)))
+
+#define SYSCNTR_ID(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_ID4)<<4) |\
+	(GET_REG_BIT(x,SYSCNTR_ID3)<<3) |\
+	(GET_REG_BIT(x,SYSCNTR_ID2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_ID1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_ID0)))
+
+/* SDRAM Controller PLD_BOARD_TIMING */
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_CAL	9
+#define SDRAM_RCD	10
+#define SDRAM_WREQ	11
+#define SDRAM_PR 	12
+#define SDRAM_RC	13
+#define SDRAM_LMR	14
+#define SDRAM_IIP	19
+#define SDRAM_RES0	31
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_BREV0	0
+#define SYSCNTR_BREV1	1
+#define SYSCNTR_BREV2	3
+#define SYSCNTR_BREV3	4
+#define SYSCNTR_RES0	5
+#define SYSCNTR_RES1	16
+#define SYSCNTR_RES2	20
+#define SYSCNTR_FLWAIT2	28
+#define SYSCNTR_FLWAIT1	29
+#define SYSCNTR_FLWAIT0	30
+
+#define SYSCNTR_BREV(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_BREV3)<<3) |\
+	(GET_REG_BIT(x,SYSCNTR_BREV2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_BREV1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_BREV0)))
+
+#define GET_SYSCNTR_FLWAIT(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_FLWAIT2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_FLWAIT1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_FLWAIT0)))
+
+#define SET_SYSCNTR_FLWAIT(x)	(	\
+	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_FLWAIT2)) |\
+	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_FLWAIT1)) |\
+	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_FLWAIT0)))
+
+/* SDRAM Controller REG 2*/
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_MUX0	9
+#define SDRAM_MUX1	10
+#define SDRAM_PDIS	11
+#define SDRAM_RES1 	12
+#define SDRAM_RES2	13
+#define SDRAM_RES3	14
+#define SDRAM_RES4	19
+#define SDRAM_RIP	31
+
+#define GET_SDRAM_MUX(x)	(	\
+	(GET_REG_BIT(x,SDRAM_MUX1)<<1)| \
+	(GET_REG_BIT(x,SDRAM_MUX0)))
+
+
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_FLAG	0
+#define SYSCNTR_IP	1
+#define SYSCNTR_BIND2	3
+#define SYSCNTR_BIND1	4
+#define SYSCNTR_BIND0	5
+#define SYSCNTR_PRM	16
+#define SYSCNTR_ICW	20
+#define SYSCNTR_ISB2	28
+#define SYSCNTR_ISB1	29
+#define SYSCNTR_ISB0	30
+
+#define GET_SYSCNTR_BOOTIND(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_BIND2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_BIND1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_BIND0)))
+
+#define SET_SYSCNTR_BOOTIND(x)	(	\
+	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_BIND2)) |\
+	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_BIND1))| \
+	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_BIND0)))
+
+#define GET_SYSCNTR_ISB(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_ISB2)<<2)| \
+	(GET_REG_BIT(x,SYSCNTR_ISB1)<<1)| \
+	(GET_REG_BIT(x,SYSCNTR_ISB0)))
+
+#define SET_SYSCNTR_ISB(x)	(	\
+	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_ISB2))| \
+	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_ISB))| \
+	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_ISB0)))
+
+/* SDRAM Controller REG 3*/
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_RES5	9
+#define SDRAM_CFG1	10
+#define SDRAM_CFG2	11
+#define SDRAM_CFG3 	12
+#define SDRAM_RES6	13
+#define SDRAM_CFG5	14
+#define SDRAM_CFG6	19
+#define SDRAM_RES7	31
+
+#define GET_SDRAM_CFG(x)	(	\
+	(GET_REG_BIT(x,SDRAM_CFG6)<<4) |\
+	(GET_REG_BIT(x,SDRAM_CFG5)<<3) |\
+	(GET_REG_BIT(x,SDRAM_CFG3)<<2) |\
+	(GET_REG_BIT(x,SDRAM_CFG2)<<1) |\
+	(GET_REG_BIT(x,SDRAM_CFG1)))
+
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_BDIS	0
+#define SYSCNTR_PCIM	1
+#define SYSCNTR_CFG0	3
+#define SYSCNTR_CFG1	4
+#define SYSCNTR_CFG2	5
+#define SYSCNTR_CFG3	16
+#define SYSCNTR_BOOTEN	20
+#define SYSCNTR_CPU_VPP	28
+#define SYSCNTR_FL_VPP	29
+#define SYSCNTR_FL_WP	30
+
+#define GET_SYSCNTR_CFG(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_CFG3)<<3)| \
+	(GET_REG_BIT(x,SYSCNTR_CFG2)<<2)| \
+	(GET_REG_BIT(x,SYSCNTR_CFG1)<<1)| \
+	(GET_REG_BIT(x,SYSCNTR_CFG0)))
+
+
+/***************************************************************
+ * MISC Defines
+ ***************************************************************/
+
+#define PCI_VENDOR_ID_MPL 	0x18E6
+#define PCI_DEVICE_ID_PATI	0x00DA
+
+#if defined(CONFIG_MIP405)
+#define PATI_FIRMWARE_START_OFFSET	0x00300000
+#define PATI_ISO_STRING  "MEV-10084-001"
+#endif
+
+#define PATI_ENDIAN_MODE	0x3E
+
+/*******************************************
+ * PATI Mapping:
+ * -------------
+ * PCI Map:
+ * -------
+ * All addreses are mapped into the memory area
+ * (IO Area on some areas may also be possible)
+ * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
+ * - pci_space0_addr:  configurable
+ * - pci_space1_addr	  configurable
+ *
+ * Local Map:
+ * ----------
+ * Local addresses (Remap)
+ * - SDRAM      0x06000000 Size 16MByte mask 0xff000000
+ * - EPLD CFG   0x07000000 Size 512Bytes
+ * - FLASH      0x03000000 Size up to 8MByte
+ * - CPU        0x01000000 Size 4MByte (only accessable if special configured)
+ *
+ * Implemention:
+ * -------------
+ * To prevent using large resources reservation on the host following
+ * PCI mapping is choosed:
+ * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
+ * - pci_space0_addr:  configured to the EPLD Config Area size 256Bytes
+ * - pci_space1_addr:  configured to the SDRAM Area size 1MBytes, this
+ *                     space is used to switch between SDRAM, Flash and CPU
+ *
+ */
+
+/* Attribute definitions */
+#define PATI_BUS_SIZE_8		0
+#define PATI_BUS_SIZE_16	1
+#define PATI_BUS_SIZE_32	3
+
+#define PATI_SPACE0_MASK	(0xFEFFFE00)  /* Mask Attributes */
+#define PATI_SPACE1_MASK	(0x00000000)  /* Mask Attributes */
+
+#define PATI_EXTRA_LONG_EEPROM	1
+
+#define SPACE0_TA_ENABLE (1<<6)
+#define SPACE1_TA_ENABLE (1<<6)
+
+/* Config Area */
+#define PATI_LOC_CFG_ADDR		0x07000000		/* Local Address */
+#define PATI_LOC_CFG_MASK		0xFFFFFF00  		/* 256 Bytes */
+/* Attributes */
+#define PATI_LOC_CFG_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
+#define PATI_LOC_CFG_BURST		0  			/* No Burst */
+#define PATI_LOC_CFG_NO_PREFETCH	1  			/* No Prefetch */
+#define PATI_LOC_CFG_TA_ENABLE		1 			/* Enable TA */
+
+#define PATI_LOC_CFG_SPACE0_ATTR  ( \
+		PATI_LOC_CFG_BUS_SIZE | \
+		(PATI_LOC_CFG_TA_ENABLE << 6) | \
+		(PATI_LOC_CFG_NO_PREFETCH << 8) | \
+		(PATI_LOC_CFG_BURST << 24) | \
+		(PATI_EXTRA_LONG_EEPROM << 25))
+
+/* should never be used */
+#define PATI_LOC_CFG_SPACE1_ATTR  ( \
+		PATI_LOC_CFG_BUS_SIZE | \
+		(PATI_LOC_CFG_TA_ENABLE << 6) | \
+		(PATI_LOC_CFG_NO_PREFETCH << 9) | \
+		(PATI_LOC_CFG_BURST << 8))
+
+
+/* SDRAM Area */
+#define PATI_LOC_SDRAM_ADDR		0x06000000		/* Local Address */
+#define PATI_LOC_SDRAM_MASK		0xFFF00000		/* 1MByte */
+/* Attributes */
+#define PATI_LOC_SDRAM_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
+#define PATI_LOC_SDRAM_BURST		0  			/* No Burst */
+#define PATI_LOC_SDRAM_NO_PREFETCH	0  			/* Prefetch */
+#define PATI_LOC_SDRAM_TA_ENABLE	1  			/* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_SDRAM_SPACE0_ATTR  ( \
+		PATI_LOC_SDRAM_BUS_SIZE | \
+		(PATI_LOC_SDRAM_TA_ENABLE << 6) | \
+		(PATI_LOC_SDRAM_NO_PREFETCH << 8) | \
+		(PATI_LOC_SDRAM_BURST << 24) | \
+		(PATI_EXTRA_LONG_EEPROM << 25))
+
+#define PATI_LOC_SDRAM_SPACE1_ATTR  ( \
+		PATI_LOC_SDRAM_BUS_SIZE | \
+		(PATI_LOC_SDRAM_TA_ENABLE << 6) | \
+		(PATI_LOC_SDRAM_NO_PREFETCH << 9) | \
+		(PATI_LOC_SDRAM_BURST << 8))
+
+
+/* Flash Area */
+#define PATI_LOC_FLASH_ADDR		0x03000000		/* Local Address */
+#define PATI_LOC_FLASH_MASK		0xFFF00000		/* 1MByte */
+/* Attributes */
+#define PATI_LOC_FLASH_BUS_SIZE		PATI_BUS_SIZE_16  	/* 16 Bit */
+#define PATI_LOC_FLASH_BURST		0  			/* No Burst */
+#define PATI_LOC_FLASH_NO_PREFETCH	1  			/* No Prefetch */
+#define PATI_LOC_FLASH_TA_ENABLE	1  			/* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_FLASH_SPACE0_ATTR  ( \
+		PATI_LOC_FLASH_BUS_SIZE | \
+		(PATI_LOC_FLASH_TA_ENABLE << 6) | \
+		(PATI_LOC_FLASH_NO_PREFETCH << 8) | \
+		(PATI_LOC_FLASH_BURST << 24) | \
+		(PATI_EXTRA_LONG_EEPROM << 25))
+
+#define PATI_LOC_FLASH_SPACE1_ATTR  ( \
+		PATI_LOC_FLASH_BUS_SIZE | \
+		(PATI_LOC_FLASH_TA_ENABLE << 6) | \
+		(PATI_LOC_FLASH_NO_PREFETCH << 9) | \
+		(PATI_LOC_FLASH_BURST << 8))
+
+
+/* CPU Area */
+#define PATI_LOC_CPU_ADDR		0x01000000		/* Local Address */
+#define PATI_LOC_CPU_MASK		0xFFF00000		/* 1Mbyte */
+/* Attributes */
+#define PATI_LOC_CPU_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
+#define PATI_LOC_CPU_BURST		0			/* No Burst */
+#define PATI_LOC_CPU_NO_PREFETCH	1			/* No Prefetch */
+#define PATI_LOC_CPU_TA_ENABLE		1			/* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_CPU_SPACE0_ATTR  ( \
+		PATI_LOC_CPU_BUS_SIZE | \
+		(PATI_LOC_CPU_TA_ENABLE << 6) | \
+		(PATI_LOC_CPU_NO_PREFETCH << 8) | \
+		(PATI_LOC_CPU_BURST << 24) | \
+		(PATI_EXTRA_CPU_EEPROM << 25))
+
+#define PATI_LOC_CPU_SPACE1_ATTR  ( \
+		PATI_LOC_CPU_BUS_SIZE | \
+		(PATI_LOC_CPU_TA_ENABLE << 6) | \
+		(PATI_LOC_CPU_NO_PREFETCH << 9) | \
+		(PATI_LOC_CPU_BURST << 8))
+
+/***************************************************
+ * Hardware Config word definition
+ ***************************************************/
+#define BOOT_EXT_FLASH		0x00000000
+#define BOOT_INT_FLASH		0x00000004
+#define BOOT_FROM_PCI		0x00000006
+#define BOOT_FROM_SDRAM		0x00000005
+
+#define ENABLE_INT_ARB		0x00000008
+
+#define INITIAL_IRQ_PREF	0x00000010
+
+#define INITIAL_MEM_0M		0x00000000
+#define INITIAL_MEM_4M		0x00000080
+#define INITIAL_MEM_8M		0x00000040
+#define INITIAL_MEM_12M		0x000000C0
+#define INITIAL_MEM_16M		0x00000020
+#define INITIAL_MEM_20M		0x000000A0
+#define INITIAL_MEM_24M		0x00000060
+#define INITIAL_MEM_28M		0x000000E0
+/* CONF */
+#define INTERNAL_HWCONF		0x00000100
+/* PRPM */
+#define LOCAL_CPU_SLAVE		0x00000200
+/* BDIS */
+#define DISABLE_MEM_CNTR	0x00000400
+/* PCIM */
+#define PCI_MASTER_ONLY		0x00000800
+
+
+#define PATI_HW_START		((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF))
+#define PATI_HW_PCI_ONLY 	((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_CPU_ACC		((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_CPU_SLAVE 	((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE))
+
+/***************************************************
+ * Direct Master Config
+ ***************************************************/
+#define PATI_DMASTER_PCI_ADDR		0x01000000
+#define PATI_BUS_MASTER 1
+
+
+#define PATI_DMASTER_MASK 		0xFFF00000  /* 1MByte */
+#define PATI_DMASTER_ADDR 		0x01000000  /* Local Address */
+
+#define PATI_DMASTER_MEMORY_EN 		0x00000001 /* 0x00000001 */
+#define PATI_DMASTER_READ_AHEAD 	0x00000004 /* 0x00000004 */
+#define PATI_DMASTER_READ_NOT_AHEAD 	0x00000000 /* 0x00000004 */
+#define PATI_DMASTER_PRE_SIZE_CNTRL_0	0x00000000
+#define PATI_DMASTER_PRE_SIZE_CNTRL_4	0x00000008
+#define PATI_DMASTER_PRE_SIZE_CNTRL_8	0x00001000
+#define PATI_DMASTER_PRE_SIZE_CNTRL_16	0x00001008
+#define PATI_DMASTER_REL_PCI		0x00000000
+#define PATI_DMASTER_NOT_REL_PCI	0x00000010
+#define PATI_DMASTER_WR_INVAL		0x00000200
+#define PATI_DMASTER_NOT_WR_INVAL	0x00000000
+#define PATI_DMASTER_PRE_LIMIT		0x00000800
+#define PATI_DMASTER_PRE_CONT		0x00000000
+#define PATI_DMASTER_DELAY_WR_0		0x00000000
+#define PATI_DMASTER_DELAY_WR_4		0x00004000
+#define PATI_DMASTER_DELAY_WR_8		0x00008000
+#define PATI_DMASTER_DELAY_WR_16	0x0000C000
+
+#define PATI_DMASTER_PCI_ADDR_MASK	0xFFFF0000
+
+#define PATI_DMASTER_ATTR	\
+	PATI_DMASTER_MEMORY_EN | \
+	PATI_DMASTER_READ_AHEAD | \
+	PATI_DMASTER_PRE_SIZE_CNTRL_4 | \
+	PATI_DMASTER_REL_PCI | \
+	PATI_DMASTER_NOT_WR_INVAL | \
+	PATI_DMASTER_PRE_LIMIT | \
+	PATI_DMASTER_DELAY_WR_0
+
+
+#endif /* #ifndef __PATI_H_ */