mpc83xx: Add support for MergerBox board

Includes board config file, documentation, maintainer and boards.cfg
entries, and board specific files in vendor dir.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

7 files changed, 824 insertions, 0 deletions

diff --git a/board/matrix_vision/mergerbox/Makefile b/board/matrix_vision/mergerbox/Makefile
new file mode 100644
index 0000000000..2b78c98e3b
--- /dev/null
+++ b/board/matrix_vision/mergerbox/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o pci.o fpga.o sm107.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/matrix_vision/mergerbox/fpga.c b/board/matrix_vision/mergerbox/fpga.c
new file mode 100644
index 0000000000..673bc2c95f
--- /dev/null
+++ b/board/matrix_vision/mergerbox/fpga.c
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * (C) Copyright 2011
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ACEX1K.h>
+#include <command.h>
+#include "mergerbox.h"
+#include "fpga.h"
+
+Altera_CYC2_Passive_Serial_fns altera_fns = {
+	fpga_null_fn,
+	fpga_config_fn,
+	fpga_status_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_null_fn,
+	fpga_null_fn,
+};
+
+Altera_desc cyclone2 = {
+	Altera_CYC2,
+	passive_serial,
+	Altera_EP2C20_SIZE,
+	(void *) &altera_fns,
+	NULL,
+	0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mergerbox_init_fpga(void)
+{
+	debug("Initialize FPGA interface\n");
+	fpga_init();
+	fpga_add(fpga_altera, &cyclone2);
+
+	return 1;
+}
+
+int fpga_null_fn(int cookie)
+{
+	return 0;
+}
+
+int fpga_config_fn(int assert, int flush, int cookie)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+	u32 dvo = gpio->dat;
+
+	dvo &= ~FPGA_CONFIG;
+	gpio->dat = dvo;
+	udelay(5);
+	dvo |= FPGA_CONFIG;
+	gpio->dat = dvo;
+
+	return assert;
+}
+
+int fpga_done_fn(int cookie)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+	int result = 0;
+
+	udelay(10);
+	debug("CONF_DONE check ... ");
+	if (gpio->dat & FPGA_CONF_DONE) {
+		debug("high\n");
+		result = 1;
+	} else
+		debug("low\n");
+
+	return result;
+}
+
+int fpga_status_fn(int cookie)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+	int result = 0;
+
+	debug("STATUS check ... ");
+	if (gpio->dat & FPGA_STATUS) {
+		debug("high\n");
+		result = 1;
+	} else
+		debug("low\n");
+
+	return result;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+	u32 dvo = gpio->dat;
+
+	debug("CLOCK %s\n", assert_clk ? "high" : "low");
+	if (assert_clk)
+		dvo |= FPGA_CCLK;
+	else
+		dvo &= ~FPGA_CCLK;
+
+	if (flush)
+		gpio->dat = dvo;
+
+	return assert_clk;
+}
+
+static inline int _write_fpga(u8 val, int dump)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+	int i;
+	u32 dvo = gpio->dat;
+
+	if (dump)
+		debug("  %02x -> ", val);
+	for (i = 0; i < 8; i++) {
+		dvo &= ~FPGA_CCLK;
+		gpio->dat = dvo;
+		dvo &= ~FPGA_DIN;
+		if (dump)
+			debug("%d ", val&1);
+		if (val & 1)
+			dvo |= FPGA_DIN;
+		gpio->dat = dvo;
+		dvo |= FPGA_CCLK;
+		gpio->dat = dvo;
+		val >>= 1;
+	}
+	if (dump)
+		debug("\n");
+
+	return 0;
+}
+
+int fpga_wr_fn(void *buf, size_t len, int flush, int cookie)
+{
+	unsigned char *data = (unsigned char *) buf;
+	int i;
+
+	debug("fpga_wr: buf %p / size %d\n", buf, len);
+	for (i = 0; i < len; i++)
+		_write_fpga(data[i], 0);
+	debug("\n");
+
+	return FPGA_SUCCESS;
+}
diff --git a/board/matrix_vision/mergerbox/fpga.h b/board/matrix_vision/mergerbox/fpga.h
new file mode 100644
index 0000000000..fccff9fbca
--- /dev/null
+++ b/board/matrix_vision/mergerbox/fpga.h
@@ -0,0 +1,30 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+extern int mergerbox_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_status_fn(int cookie);
+extern int fpga_config_fn(int assert, int flush, int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie);
+extern int fpga_null_fn(int cookie);
diff --git a/board/matrix_vision/mergerbox/mergerbox.c b/board/matrix_vision/mergerbox/mergerbox.c
new file mode 100644
index 0000000000..8616205af5
--- /dev/null
+++ b/board/matrix_vision/mergerbox/mergerbox.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+#include <fdt_support.h>
+#include <spd_sdram.h>
+#include "mergerbox.h"
+#include "fpga.h"
+#include "../common/mv_common.h"
+
+static void setup_serdes(void)
+{
+	fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+		FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+	fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+		FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+}
+
+#if defined(CONFIG_SYS_DRAM_TEST)
+int testdram(void)
+{
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+		CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+phys_size_t initdram(int board_type)
+{
+	u32 msize;
+
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
+
+	/* Enable PCI_CLK[0:1] */
+	clk->occr |= 0xc0000000;
+	udelay(2000);
+
+#if defined(CONFIG_SPD_EEPROM)
+	msize = spd_sdram();
+#else
+	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize_log2;
+
+	msize = CONFIG_SYS_DDR_SIZE;
+	msize_log2 = __ilog2(msize);
+
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
+	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
+	udelay(50000);
+
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
+	udelay(1000);
+
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	udelay(1000);
+
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	__asm__ __volatile__("sync");
+	udelay(1000);
+
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+	udelay(2000);
+#endif
+	setup_serdes();
+
+	return msize << 20;
+}
+
+int checkboard(void)
+{
+	puts("Board: Matrix Vision MergerBox\n");
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	u16 dim;
+	int result;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile gpio83xx_t *gpio = (gpio83xx_t *)&immr->gpio[1];
+	unsigned char mac[6], mac_verify[6];
+	char *s = getenv("reset_env");
+
+	for (dim = 10; dim < 180; dim += 5) {
+		mergerbox_tft_dim(dim);
+		udelay(100000);
+	}
+
+	if (s)
+		mv_reset_environment();
+
+	i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac, sizeof(mac));
+
+	/* check if Matrix Vision prefix present and export to env */
+	if (mac[0] == 0x00 && mac[1] == 0x0c && mac[2] == 0x8d) {
+		printf("valid MAC found in eeprom: %pM\n", mac);
+		eth_setenv_enetaddr("ethaddr", mac);
+	} else {
+		printf("no valid MAC found in eeprom.\n");
+
+		/* no: check the env */
+		if (!eth_getenv_enetaddr("ethaddr", mac)) {
+			printf("no valid MAC found in env either.\n");
+			/* TODO: ask for valid MAC */
+		} else {
+			printf("valid MAC found in env: %pM\n", mac);
+			printf("updating MAC in eeprom.\n");
+
+			do {
+				result = test_and_clear_bit(20, &gpio->dat);
+				if (result)
+					printf("unprotect EEPROM failed !\n");
+				udelay(20000);
+			} while(result);
+
+			i2c_write(SPD_EEPROM_ADDRESS, 0x80, 2, mac, 6);
+			udelay(20000);
+
+			do {
+				result = test_and_set_bit(20, &gpio->dat);
+				if (result)
+					printf("protect EEPROM failed !\n");
+				udelay(20000);
+			} while(result);
+
+			printf("verify MAC %pM ... ", mac);
+			i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac_verify, 6);
+
+			if (!strncmp((char *)mac, (char *)mac_verify, 6))
+				printf("ok.\n");
+			else
+				/* TODO: retry or do something useful */
+				printf("FAILED (got %pM) !\n", mac_verify);
+		}
+	}
+
+	return 0;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
+
+	iopd->dat &= ~TFT_SPI_CPLD_CS;
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
+
+	iopd->dat |= TFT_SPI_CPLD_CS;
+}
+
+/* control backlight pwm (display brightness).
+ * allow values 0-250 with 0 = turn off and 250 = max brightness
+ */
+void mergerbox_tft_dim(u16 value)
+{
+	struct spi_slave *slave;
+	u16 din;
+	u16 dout = 0;
+
+	if (value > 0 && value < 250)
+		dout = 0x4000 | value;
+
+	slave = spi_setup_slave(0, 0, 1000000, SPI_MODE_0 | SPI_CS_HIGH);
+	spi_claim_bus(slave);
+	spi_xfer(slave, 16, &dout, &din, SPI_XFER_BEGIN | SPI_XFER_END);
+	spi_release_bus(slave);
+	spi_free_slave(slave);
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+	fdt_fixup_dr_usb(blob, bd);
+	ft_pci_setup(blob, bd);
+}
diff --git a/board/matrix_vision/mergerbox/mergerbox.h b/board/matrix_vision/mergerbox/mergerbox.h
new file mode 100644
index 0000000000..d666d071f6
--- /dev/null
+++ b/board/matrix_vision/mergerbox/mergerbox.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __MERGERBOX_H__
+#define __MERGERBOX_H__
+
+#define MV_GPIO
+
+/*
+ * GPIO Bank 1
+ */
+#define	TFT_SPI_EN	(0x80000000>>0)
+#define	FPGA_CONFIG	(0x80000000>>1)
+#define	FPGA_STATUS	(0x80000000>>2)
+#define	FPGA_CONF_DONE	(0x80000000>>3)
+#define	FPGA_DIN	(0x80000000>>4)
+#define	FPGA_CCLK	(0x80000000>>5)
+#define	MAN_RST		(0x80000000>>6)
+#define	FPGA_SYS_RST	(0x80000000>>7)
+#define	WD_WDI		(0x80000000>>8)
+#define	TFT_RST		(0x80000000>>9)
+#define	HISCON_GPIO1	(0x80000000>>10)
+#define	HISCON_GPIO2	(0x80000000>>11)
+#define	B2B_GPIO2	(0x80000000>>12)
+#define	CCU_GPIN	(0x80000000>>13)
+#define	CCU_GPOUT	(0x80000000>>14)
+#define	TFT_GPIO0	(0x80000000>>15)
+#define	TFT_GPIO1	(0x80000000>>16)
+#define	TFT_GPIO2	(0x80000000>>17)
+#define	TFT_GPIO3	(0x80000000>>18)
+#define	B2B_GPIO0	(0x80000000>>19)
+#define	B2B_GPIO1	(0x80000000>>20)
+#define	TFT_SPI_CPLD_CS	(0x80000000>>21)
+#define	TFT_SPI_CS	(0x80000000>>22)
+#define	CCU_PWR_EN	(0x80000000>>23)
+#define	B2B_GPIO3	(0x80000000>>24)
+#define	CCU_PWR_STAT	(0x80000000>>25)
+
+#define MV_GPIO1_DAT	(FPGA_CONFIG|CCU_PWR_EN|TFT_SPI_CPLD_CS)
+#define MV_GPIO1_OUT	(TFT_SPI_EN|FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|CCU_PWR_EN| \
+			 TFT_SPI_CPLD_CS)
+#define MV_GPIO1_ODE	(FPGA_CONFIG|MAN_RST)
+
+/*
+ * GPIO Bank 2
+ */
+#define	SPI_FLASH_WP	(0x80000000>>10)
+#define	SYS_EEPROM_WP	(0x80000000>>11)
+#define	SPI_FLASH_CS	(0x80000000>>22)
+
+#define MV_GPIO2_DAT	(SYS_EEPROM_WP|SPI_FLASH_CS)
+#define MV_GPIO2_OUT	(SPI_FLASH_WP|SYS_EEPROM_WP|SPI_FLASH_CS)
+#define MV_GPIO2_ODE	0
+
+void mergerbox_tft_dim(u16 value);
+
+#endif
diff --git a/board/matrix_vision/mergerbox/pci.c b/board/matrix_vision/mergerbox/pci.c
new file mode 100644
index 0000000000..8bc8342701
--- /dev/null
+++ b/board/matrix_vision/mergerbox/pci.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+#include "mergerbox.h"
+#include "fpga.h"
+#include "../common/mv_common.h"
+
+static struct pci_region pci_regions[] = {
+	{
+		.bus_start = CONFIG_SYS_PCI_MEM_BASE,
+		.phys_start = CONFIG_SYS_PCI_MEM_PHYS,
+		.size = CONFIG_SYS_PCI_MEM_SIZE,
+		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
+	},
+	{
+		.bus_start = CONFIG_SYS_PCI_MMIO_BASE,
+		.phys_start = CONFIG_SYS_PCI_MMIO_PHYS,
+		.size = CONFIG_SYS_PCI_MMIO_SIZE,
+		.flags = PCI_REGION_MEM
+	},
+	{
+		.bus_start = CONFIG_SYS_PCI_IO_BASE,
+		.phys_start = CONFIG_SYS_PCI_IO_PHYS,
+		.size = CONFIG_SYS_PCI_IO_SIZE,
+		.flags = PCI_REGION_IO
+	}
+};
+
+static struct pci_region pcie_regions_0[] = {
+	{
+		.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
+		.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
+		.size = CONFIG_SYS_PCIE1_MEM_SIZE,
+		.flags = PCI_REGION_MEM,
+	},
+	{
+		.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
+		.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
+		.size = CONFIG_SYS_PCIE1_IO_SIZE,
+		.flags = PCI_REGION_IO,
+	},
+};
+
+static struct pci_region pcie_regions_1[] = {
+	{
+		.bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
+		.phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
+		.size = CONFIG_SYS_PCIE2_MEM_SIZE,
+		.flags = PCI_REGION_MEM,
+	},
+	{
+		.bus_start = CONFIG_SYS_PCIE2_IO_BASE,
+		.phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
+		.size = CONFIG_SYS_PCIE2_IO_SIZE,
+		.flags = PCI_REGION_IO,
+	},
+};
+
+void pci_init_board(void)
+{
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile sysconf83xx_t *sysconf = &immr->sysconf;
+	volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
+	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+	volatile law83xx_t *pcie_law = sysconf->pcielaw;
+	struct pci_region *reg[] = { pci_regions };
+	struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
+
+	volatile gpio83xx_t *gpio;
+	gpio = (gpio83xx_t *)&immr->gpio[0];
+
+	gpio->dat = MV_GPIO1_DAT;
+	gpio->odr = MV_GPIO1_ODE;
+	gpio->dir = MV_GPIO1_OUT;
+
+	gpio = (gpio83xx_t *)&immr->gpio[1];
+
+	gpio->dat = MV_GPIO2_DAT;
+	gpio->odr = MV_GPIO2_ODE;
+	gpio->dir = MV_GPIO2_OUT;
+
+	printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
+		immr->sysconf.sicrl);
+
+	/* Enable PCI_CLK[0:1] */
+	clk->occr |= 0xc0000000;
+	udelay(2000);
+
+	mergerbox_init_fpga();
+	mv_load_fpga();
+
+	mergerbox_tft_dim(0);
+
+	/* Configure PCI Local Access Windows */
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+	udelay(2000);
+
+	mpc83xx_pci_init(1, reg);
+
+	/* Deassert the resets in the control register */
+	out_be32(&sysconf->pecr1, 0xE0008000);
+	out_be32(&sysconf->pecr2, 0xE0008000);
+	udelay(2000);
+
+	out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
+	out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+	out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
+	out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+	mpc83xx_pcie_init(2, pcie_reg);
+}
diff --git a/board/matrix_vision/mergerbox/sm107.c b/board/matrix_vision/mergerbox/sm107.c
new file mode 100644
index 0000000000..db716b29bf
--- /dev/null
+++ b/board/matrix_vision/mergerbox/sm107.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <ns16550.h>
+#include <netdev.h>
+#include <sm501.h>
+#include <pci.h>
+#include "../common/mv_common.h"
+
+#ifdef CONFIG_VIDEO
+static const SMI_REGS init_regs_800x480[] = {
+	/* set endianess to little endian */
+	{0x0005c, 0x00000000},
+	/* PCI drive 12mA */
+	{0x00004, 0x42401001},
+	/* current clock */
+	{0x0003c, 0x310a1818},
+	/* clocks for pm0... */
+	{0x00040, 0x0002184f},
+	{0x00044, 0x2a1a0a01},
+	/* GPIO */
+	{0x10008, 0x00000000},
+	{0x1000C, 0x00000000},
+	/* panel control regs */
+	{0x80000, 0x0f017106},
+	{0x80004, 0x0},
+	{0x80008, 0x0},
+	{0x8000C, 0x00000000},
+	{0x80010, 0x0c800c80},
+	/* width 0x320 */
+	{0x80014, 0x03200000},
+	/* height 0x1e0 */
+	{0x80018, 0x01E00000},
+	{0x8001C, 0x0},
+	{0x80020, 0x01df031f},
+	{0x80024, 0x041f031f},
+	{0x80028, 0x00800347},
+	{0x8002C, 0x020c01df},
+	{0x80030, 0x000201e9},
+	{0x80200, 0x00000000},
+	/* ZV[0:7] */
+	{0x00008, 0x00ff0000},
+	/* 24-Bit TFT */
+	{0x0000c, 0x3f000000},
+	{0, 0}
+};
+
+/*
+ * Returns SM107 register base address. First thing called in the driver.
+ */
+unsigned int board_video_init(void)
+{
+	pci_dev_t devbusfn;
+	u32 addr;
+
+	devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
+	if (devbusfn != -1) {
+		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1,
+			(u32 *)&addr);
+		return addr & 0xfffffffe;
+	}
+
+	return 0;
+}
+
+/*
+ * Called after initializing the SM501 and before clearing the screen.
+ */
+void board_validate_screen(unsigned int base)
+{
+}
+
+/*
+ * Returns SM107 framebuffer address
+ */
+unsigned int board_video_get_fb(void)
+{
+	pci_dev_t devbusfn;
+	u32 addr;
+
+	devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
+	if (devbusfn != -1) {
+		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
+			(u32 *)&addr);
+		addr &= 0xfffffffe;
+#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
+		addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
+#endif
+		return addr;
+	}
+
+	printf("board_video_get_fb(): FAILED\n");
+
+	return 0;
+}
+
+/*
+ * Return a pointer to the initialization sequence.
+ */
+const SMI_REGS *board_get_regs(void)
+{
+	return init_regs_800x480;
+}
+
+int board_get_width(void)
+{
+	return 800;
+}
+
+int board_get_height(void)
+{
+	return 480;
+}
+#endif